Publication detail

Polymer-silicate composite based on alternative raw materials under conditions of increased temperature

MELICHAR, T. BYDŽOVSKÝ, J.

Original Title

Polymer-silicate composite based on alternative raw materials under conditions of increased temperature

Type

conference paper

Language

English

Original Abstract

The paper presents research into studying the properties of composite materials with polymer-silicate matrix and porous (lightweight) filler. Specifically, the matrix based on cement substituted by 35% of alternative raw material was considered. In case of filler aggregate based sintered ash was used. Investigated materials were exposed at high temperatures. Thermal loading took place gradually in temperature increments of 22 °C (reference conditions), 400, 600, 800 and 1000 °C with subsequent controlled cooling. Attention was also focused on various ways of cooling – slow in the furnace (1 °C/min) and immersion in water (bath temperature c. 18 °C). Suitability of matrix modification and use of porous fillers based on alternative raw materials was proved by set of analyses. After exposure in an environment with a temperature of 1000 °C followed by quench cooling was set residual compressive strength of about 40%, which is relatively high for this type of the matrix. The curves of residual strength with different types of cooling are intriguing too. Selected samples were also investigated by using micro/structural techniques, where the emphasis was placed on the formation of any defects related.

Keywords

Composite, extreme, temperature, regime, cooling.

Authors

MELICHAR, T.; BYDŽOVSKÝ, J.

Released

3. 8. 2016

Publisher

Elsevier

Location

Nizozemsko

ISBN

978-1-5108-2855-1

Book

Ecology and New Building Materials and Products

ISBN

1877-7058

Periodical

Procedia Engineering

Year of study

151

Number

1

State

Kingdom of the Netherlands

Pages from

375

Pages to

382

Pages count

8

URL

Full text in the Digital Library

BibTex

@inproceedings{BUT127078,
  author="Tomáš {Melichar} and Jiří {Bydžovský}",
  title="Polymer-silicate composite based on alternative raw materials under conditions of increased temperature",
  booktitle="Ecology and New Building Materials and Products",
  year="2016",
  journal="Procedia Engineering",
  volume="151",
  number="1",
  pages="375--382",
  publisher="Elsevier",
  address="Nizozemsko",
  doi="10.1016/j.proeng.2016.07.398",
  isbn="978-1-5108-2855-1",
  issn="1877-7058",
  url="https://www.sciencedirect.com/science/article/pii/S1877705816317866"
}