Course detail

High-speed Communications Systems

FEKT-CVKSAcad. year: 2011/2012

Introduction to High-speed communication systems. Using technology. Ethernet, Fast Ethernet, Gigabit Ethernet, 40 Gbit Ethernet, Gbit Ethernet. Synchronous Digital Hierarchy SDH. Asynchronous Transfer Mode ATM. Next high-speed technology. High-speed system CISCO 2821. IP telephony in CISO networks, routing IP-MPLS. Architecture of Czech synchronization network. Technology ATM. TMN - Telecommunication Management Network. Basics of voice transmission using IP. Using of CISCO technology. Principles of VoIP, signalling protocols VoIP, covered protocols set H.323, VoIP and QoS. Analogue voice ports, local calling, calling in network, calling out of network, voice ports on routers CISCO IOS, analogue voice ports configuration, trunks, Dial-peers. Digital voice ports, digital trunks, CAS T1, CAS E1 R2, QSIG. Gates control, protocol H.323, implementation of gates MGCP, implementation of gates SIP. Plan of dialling. Advanced calling plan configuration.
Laboratory:
1. CISCO Introduction
2. CISCO VoIP
3. MPLS VPN
4. CISCO security
5. Přenos FHHS
6. CDMA
7. BER
8. Bandwidth
9. Voiceband
10. DSS

Language of instruction

English

Number of ECTS credits

5

Mode of study

Not applicable.

Learning outcomes of the course unit

Detailed knowledge of SDH and telecommunication networks based on SDH. Telecommunication Management Network- TMN

Prerequisites

The subject knowledge on the secondary school education level is requested.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Teaching methods depend on the type of course unit as specified in the article of BUT Rules for Studies and Examinations.

Assesment methods and criteria linked to learning outcomes

Requirements for completion of a course are specified by a regulation issued by the lecturer responsible for the course and updated for every.

Course curriculum

1. Introduction to High-speed communication systems. Using technology. Ethernet, Fast Ethernet, Gigabit Ethernet, 40 Gbit Ethernet, Gbit Ethernet. Synchronous Digital Hierarchy SDH. Asynchronous Transfer Mode ATM. Next high-speed technology. High-speed system CISCO 2821. IP telephony in CISO networks, routing IP-MPLS.

2 Synchronous Digital Hierarchy - SDH. Recommendation ITU-T about SDH, multiplex structure SDH, frame STM-1 structure, synchronous multiplexing STM-1 to STM-4, SDH generation.

3. Integration of PDH 4.th order to STM-1, pointer AU-4/PTS, stuffing of frame beginning, integration E1 to STM-1. Ethernet over SDH. Network elements and nodes SDH. Network SDH structure.

4. Architecture of Czech synchronization network. Quality of digital channel evaluation, area of using Rec. G.826.

5. Technology ATM. ATM cell, interfaces of ATM networks, ATM connection, addressing at ATM, reference model ATM. ATM adaptive layer, ATM quality of service.

6. TMN - Telecommunication Management Network. Function blocks TMN. Physical TMN architecture.

7. Basics of voice transmission using IP. Using of CISCO technology. Principles of VoIP, signalling protocols VoIP, covered protocols set H.323, important protocols MGCP, SIP (Session Initiation Protocol), SCCP (Skinny Client Control Protocol). Protocols for medium transports RTP (Real Time Transport Protocol), RTCP (RTP Control Protocol), cRTP (Compressed RTP), sRTP (Secure RTP). gates VoIP, hardware gates.

8. VoIP and QoS. Sound quality for IP, using methods, voice packets, processing by codecs, processing by processors DSP

9. Analogue voice ports, local calling, calling in network, calling out of network, voice ports on routers CISCO IOS, analogue voice ports configuration, trunks, Dial-peers

10. Digital voice ports, digital trunks, CAS T1, CAS E1 R2, QSIG

11. Gates control, protocol H.323, implementation of gates MGCP, implementation of gates SIP

12. Plan of dialling. Addressing of end points. Routing of calling and path selection. Handling with digits. Calling privilege, calling monitoring, requirements for dialling plan.

13. Advanced calling plan configuration. Handling with digits, collection and spending with digits, drawing of digits. Path selection, dial peers agreement. Strategy of path selection. Calling privilege on gates Cisco IOS. Problem termination.

Work placements

Not applicable.

Aims

Providing detailed knowledge of high-speed communiscations systems, the backbone of present-day telecommunication network, in the scope given below in the summary and in syllabi. Practical work with the UTKO experimental high-speed network.

Specification of controlled education, way of implementation and compensation for absences

The content and forms of instruction in the evaluated course are specified by a regulation issued by the lecturer responsible for the course and updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Not applicable.

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme EECC Bc. Bachelor's

    branch BC-TLI , 3 year of study, summer semester, elective specialised
    branch BC-EST , 3 year of study, summer semester, elective specialised

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

Syllabus

1. Introduction to High-speed communication systems. Using technology. Ethernet, Fast Ethernet, Gigabit Ethernet, 40 Gbit Ethernet, Gbit Ethernet. Synchronous Digital Hierarchy SDH. Asynchronous Transfer Mode ATM. Next high-speed technology. High-speed system CISCO 2821. IP telephony in CISO networks, routing IP-MPLS.
2 Synchronous Digital Hierarchy - SDH. Recommendation ITU-T about SDH, multiplex structure SDH, frame STM-1 structure, synchronous multiplexing STM-1 to STM-4, SDH generation.
3. Integration of PDH 4.th order to STM-1, pointer AU-4/PTS, stuffing of frame beginning, integration E1 to STM-1. Ethernet over SDH. Network elements and nodes SDH. Network SDH structure.
4. Architecture of Czech synchronization network. Quality of digital channel evaluation, area of using Rec. G.826.
5. Technology ATM. ATM cell, interfaces of ATM networks, ATM connection, addressing at ATM, reference model ATM. ATM adaptive layer, ATM quality of service.

6. TMN - Telecommunication Management Network. Function blocks TMN. Physical TMN architecture.
7. Basics of voice transmission using IP. Using of CISCO technology. Principles of VoIP, signalling protocols VoIP, covered protocols set H.323, important protocols MGCP, SIP (Session Initiation Protocol), SCCP (Skinny Client Control Protocol). Protocols for medium transports RTP (Real Time Transport Protocol), RTCP (RTP Control Protocol), cRTP (Compressed RTP), sRTP (Secure RTP). gates VoIP, hardware gates.
8. VoIP and QoS. Sound quality for IP, using methods, voice packets, processing by codecs, processing by processors DSP
9. Analogue voice ports, local calling, calling in network, calling out of network, voice ports on routers CISCO IOS, analogue voice ports configuration, trunks, Dial-peers
10. Digital voice ports, digital trunks, CAS T1, CAS E1 R2, QSIG
11. Gates control, protocol H.323, implementation of gates MGCP, implementation of gates SIP
12. Plan of dialling. Addressing of end po

Laboratory exercise

26 hod., compulsory

Teacher / Lecturer

Syllabus

Laboratory:
1. CISCO Introduction
2. CISCO VoIP
3. MPLS VPN
4. CISCO security
5. Přenos FHHS
6. CDMA
7. BER
8. Bandwidth
9. Voiceband
10. DSS