study programme

Design and Process Engineering

Original title in Czech: Konstrukční a procesní inženýrstvíFaculty: FMEAbbreviation: D-KPI-PAcad. year: 2021/2022

Type of study programme: Doctoral

Study programme code: P0715D270017

Degree awarded: Ph.D.

Language of instruction: Czech

Accreditation: 18.2.2020 - 18.2.2030

Mode of study

Full-time study

Standard study length

4 years

Programme supervisor

Doctoral Board

Fields of education

Area Topic Share [%]
Mechanical Engineering, Technology and Materials Without thematic area 100

Study aims

The main goal of the doctoral study programme is, in accordance with the Higher Education Act, to train highly qualified and educated professionals who are capable of independent scientific, research and creative activities in the field of design and process engineering. The graduates are equipped with knowledge and skills that enable them to work at Czech or international academic institutions or research institutes. The programme focuses on theoretical knowledge as well as practical experience in the field of doctoral studies. Cooperation with international research institutes is highly supported. The study programme is designed to fulfil demands and meet societal and industry requirements for highly educated and qualified professionals in the fields of design and process engineering.
Doctoral study programme is primarily based on research and creative activities of doctoral students. These activities are intensively supported by student participation in national and international research projects. Research areas include design (analysis, conception, design of machinery, vehicles, machine production and energy) and process engineering (analysis, design and projection of processes in the engineering, transport, energy and petrochemical industries).

Graduate profile

A graduate of the doctoral study programme is a highly qualified expert with broad theoretical knowledge and practical skills, which enables him/her to carry out creative and research activities both independently and/or in a scientific team. The graduate is acquainted with current findings in the field of design and process engineering and is able to apply the knowledge in his/her research or creative activities. The graduate is also able to prepare a research project proposal and to oversee a project. At the same time, the graduate is able to make use of theoretical knowledge and transfer it in practice. Moreover, the graduate can adapt findings from related disciplines, cooperate on interdisciplinary tasks and increase their professional qualifications. The graduate participation on national and international researches and cooperation with international research institutions contributes to higher level of their professional competences. This experience allows graduates not only to carry out their own scientific activities, but also to professionally present their results, and to take part in international discussions.
The graduate can demonstrate knowledge and skills in three main areas and the synergy produces great outcomes.
1. Broad theoretical knowledge and practical skills closely related to the topic of the dissertation (see below).
2. Professional knowledge and skills necessary to carry out scientific work, research, and creative activities.
3. Interpersonal and soft skills and competencies - the graduate is able to present their ideas and opinions professionally, is able to present and defend the results of their work and to discuss them and work effectively in a scientific team or to lead a team.
According to the topic of the dissertation, the graduate will acquire highly professional knowledge and skills in mechanical engineering, in particular in design and operation of machines, machinery, engineering processes and vehicles and transport vehicles. Thanks to the broad knowledge and skills, graduates can pursue a career in research institutes in the Czech Republic and abroad, as well as in commercial companies and applied research.

Profession characteristics

A graduate of the doctoral study programme is a highly qualified expert with broad theoretical knowledge and practical skills, which enables him/her to carry out creative and research activities both independently and/or in a scientific team. The graduate is acquainted with state-of-the-art findings in the field of design and process engineering and is able to apply the knowledge in his/her research or creative activities. The graduate is also able to prepare a research project proposal and to oversee a project. At the same time, the graduate can make use of theoretical knowledge and transfer it in practice. Moreover, the graduate can adapt findings from related disciplines, cooperate on interdisciplinary tasks and increase their professional qualifications. The graduate typically finds a job as a researcher, academic personnel, computer scientist or designer. The graduate is also well equipped with skills and competences to perform well in managerial positions.

Fulfilment criteria

See applicable regulations, DEAN’S GUIDELINE Rules for the organization of studies at FME (supplement to BUT Study and Examination Rules)

Study plan creation

The rules and conditions of study programmes are determined by:
BUT STUDY AND EXAMINATION RULES
BUT STUDY PROGRAMME STANDARDS,
STUDY AND EXAMINATION RULES of Brno University of Technology (USING "ECTS"),
DEAN’S GUIDELINE Rules for the organization of studies at FME (supplement to BUT Study and Examination Rules)
DEAN´S GUIDELINE Rules of Procedure of Doctoral Board of FME Study Programmes
Students in doctoral programmes do not follow the credit system. The grades “Passed” and “Failed” are used to grade examinations, doctoral state examination is graded “Passed” or “Failed”.

Availability for the disabled

Brno University of Technology acknowledges the need for equal access to higher education. There is no direct or indirect discrimination during the admission procedure or the study period. Students with specific educational needs (learning disabilities, physical and sensory handicap, chronic somatic diseases, autism spectrum disorders, impaired communication abilities, mental illness) can find help and counselling at Lifelong Learning Institute of Brno University of Technology. This issue is dealt with in detail in Rector's Guideline No. 11/2017 "Applicants and Students with Specific Needs at BUT". Furthermore, in Rector's Guideline No 71/2017 "Accommodation and Social Scholarship“ students can find information on a system of social scholarships.

Issued topics of Doctoral Study Program

  1. Active flow control as a tool for aerospace airfoils performce improvement

    The topic of thesis is connected with research activity at Institute of Aerospace Engineering. The goal is seen in experimental and computational (CFD) assessment of specific active flow concept of aircraft airfoil.

    Tutor: Juračka Jaroslav, doc. Ing., Ph.D.

  2. Active flow control as a tool for aerospace airfoils performce improvement

    The topic of thesis is connected with research activity at Institute of Aerospace Engineering. The goal is seen in experimental and computational (CFD) assessment of specific active flow concept of aircraft airfoil.

    Tutor: Juračka Jaroslav, doc. Ing., Ph.D.

  3. Active solution of Space debris system

    Cosmic debris, or cosmic debris, is a term used in astronautics to describe all anthropogenic inactive cosmic bodies, fragments and remnants of objects created by the decay of space technology, which has been launched into orbit by man. The cosmic splinters are characterized by the uncontrolled movement of fragments with high velocities, and thus high kinetic energy. With the development of cosmonautics and its gradual integration into everyday life, the increasing amount of space debris poses a serious problem threatening the future of space missions. Thus, humanity is currently facing a potential threat, in the form of the prevention of spaceflight and the use of space technology for many generations. The aim of the work would be to design a device (interception satellites) for active reduction of already formed cosmic fragmentation, for example after an orbital collision or explosion of other objects. Another possible goal is the use of this device, in the form of an active shield, protecting sensitive elements of space technology. The satellite would take up a position to protect another space object in the event of an imminent collision. Thus, all the kinetic energy generated by the impact would be absorbed by the capture satellite and the main important body would not be destroyed (eg Hubble Telescope, ISS, etc.)

    Tutor: Juračka Jaroslav, doc. Ing., Ph.D.

  4. Advanced Computational Modelling of Passenger Car Aeroacoustics

    Vehicles moving at high speeds cause turbulent flows in the environment around their bodies. The individual components of the vehicle (rear-view mirrors, antennas, aerodynamic elements, etc.) can further influence this flow locally with a significant impact on the formation of aerodynamic sound. The aim of the dissertation is to research the problem of the interaction of moving bodies in a gaseous environment with an impact on the formation of aerodynamic sound sources and the subsequent propagation of sound in the surrounding acoustic environment. The result of the work is a methodology suitable for the analysis of the influence of individual body components on the generation of aerodynamic noise of the moving vehicle. Research activities include the developement of a physical description of aerodynamic processes, the design of discretization approaches and the development of algorithms for evaluating the solution of a given physical problem. The use of available software resources (e.g. OpenFOAM, ANSYS CFX, ANSYS FLUENT, ADAMS, ACTRAN, etc.) and the creation of new algorithms in programming languages (e.g. Python, Matlab, Fortran or C) is assumed. The results will be verified by technical experiments. The work will be solved in cooperation with ŠKODA AUTO a.s. During the study, close cooperation with an industrial partner and real application of work results are expected. The study includes participation in international conferences in the field, publications in journals and possibly an internship at a world-renowned research facility abroad. Those interested in studying should present basic theoretical knowledge of aerodynamics and the ability to work with CFD programs.

    Tutor: Novotný Pavel, prof. Ing., Ph.D.

  5. Advanced object recognition methods for autonomous vehicles

    The topic deals with the extension of existing methods for object recognition moving around a vehicle. The method will be based on neural networks and will focus on quickly recognizing an object in adverse weather conditions, where this area is still a problem for driving an autonomous vehicle. The system would be built on products designed for this and tested in operation.

    Tutor: Kučera Pavel, doc. Ing., Ph.D.

  6. An experimental research on damage mechanism of journal bearings

    The aim is to clarify the mechanisms of damage of journal bearings for internal combustion engines by means of in-situ observation of the surface with unique optical technique.

    Tutor: Křupka Ivan, prof. Ing., Ph.D.

  7. Analysis and search of local DNA structures

    The project represents the develop of a specialized software platform for DNA sequence analysis with focus on large volumes of data that will include required algorithms for search of structures like quadruplexes and for protein motifs analyses with visualization tools. Proposed software will be implemented as a web service and will be used for characterization and evaluation of the local DNA structures in DNA sequences with the focus to possibility to analyse whole genomes and different local DNA structures.

    Tutor: Šťastný Jiří, prof. RNDr. Ing., CSc.

  8. Augmented Reality and Artificial Intelligence

    The purpose of this work is to create an intelligent assistant for service technician or maintenance activities. Semantic analysis of objects using advanced artificial intelligence methods will be performed. Classified objects will be further processed in the augmented reality environment. The work will be supported by strong industrial partners with the potential to be involved in follow-up projects. The work will be carried out primarily for HoloLens 2 class devices.

    Tutor: Matoušek Radomil, prof. Ing., Ph.D.

  9. Biotribology of artificial tears for the treatment of dry eye syndrome

    The main goal of research is to experimentally assess the development of friction coefficient and formation of tear film with the use of unique eye simulator. The thesis will be aimed at the performance of the developed artificial tears in terms of viscosity, friction and eye lubricating film.

    Tutor: Vrbka Martin, prof. Ing., Ph.D.

  10. Compensation of positioning errors of industrial robots

    The topic of the work is focused on solving the problem of identification and compensation of positioning errors of end effects of industrial robots for technological operations. compensations will be intended for technological operations of machining, deburring, laser cutting, etc. These technological operations require high positioning accuracy on the path, which is insufficient for standard industrial robots. This accuracy can be increased by correctly identifying errors and compensating for them. The expected benefit is a substantial improvement of the industrial robots position compensation methodology.

    Tutor: Knoflíček Radek, doc. Ing., Dr.

  11. Complex diagnostic testing centre for motorcycles

    Main goal is development of brand new testing centre for complex technical diagnostic of the motorcycle and verification of functionality of its key components like suspension, shifting under load etc. The development will be made in close cooperation with manufacturer of professional testing units for passenger cars.

    Tutor: Klapka Milan, doc. Ing., Ph.D.

  12. Computational Modelling of Soiling Processes of Turbochargers

    The aim of this dissertation is to describe the soiling processes on rotary machines. Activities include research into the physical nature of the soiling process of oil impurities and the development of appropriate methods to describe the physical process. It is expected to use computational fluid dynamics (CFD) in commercial software (ANSYS FLUENT, ANSYS CFX) with subsequent verification using a suitable technical experiment. The verified calculation model will then be applied to a real turbocharger and verified by means of technical experiments on a specialized experimental test stand. A cooperation with the industrial partner and an application of the results of work are expected. The long-term internship abroad at the world's research institutions, participations in international conferences and scientific journals are planned during the study.

    Tutor: Novotný Pavel, prof. Ing., Ph.D.

  13. Concept of autonomous mobile laboratory robot for hospitals of the future

    The purpose of this work will be the design of an autonomous mobile platform and its integration with a YuMi class collaborative robot. The result will be a mobile laboratory robot with partial autonomy and the ability to collaborate. The work assumes participation in the working group of the robotics and cybernetics section of the IACS and cooperation with a leading European development center, or global research center in health care TMC (Texas Medical Center) in Houston.

    Tutor: Matoušek Radomil, prof. Ing., Ph.D.

  14. Construction and control design of an autonomous mobile platform using artificial intelligence methods

    The purpose of this work will be the design and design of autonomous control of a mobile platform, capable of integration with a YuMi class robot. The design will include simulation modeling, the creation of a digital twin and the actual physical implementation of the mobile platform. The work assumes participation in the working group of the section of robotics, cybernetics and artificial intelligence IACS and cooperation with a leading European research and development workplace.

    Tutor: Matoušek Radomil, prof. Ing., Ph.D.

  15. Determination of rail and railway wheel wear

    Determining the degree of wear of the railway wheel and rail is very important for the possibility of using predictive maintenance and reducing the costs caused by the need for unexpected shutdown of the rail vehicle or even the track. For this purpose, research activities are constantly carried out to develop an optimal profile or the use of modern materials, also due to the fact that the speeds of train connections, the degree of load on the wheelsets or the frequency of passages on the track are constantly increasing. During their development, both approaches of numerical simulations and technical experiments are used, which serve to verify the properties under real loading. Within the dissertation, attention will be paid to both numerical simulations and the possibilities of technical experiment, including subsequent comparison. The aim of the dissertation is to develop a process of activities that can be used after validation in the development of rolling stock, including the possibility of extension to determine the vibroacoustic expression.

    Tutor: Štětina Josef, prof. Ing., Ph.D.

  16. Development of a balloon burner

    The subject of the study is an atmospheric gas multi-jet burner used for balloon flying. These burners have been developing slowly for decades and the old and proven concept today does not meet the requirements for a comfortable flight. The problem areas are in particular: to reduce water condensate from the air on the fuel exchanger tubes, black flame burnout, poor air access, Radiant heat reduction, flame geometry requirements with respect to the application, Noise reduction These are a number of conflicting requirements that require a systematic approach and a sufficient understanding of the problem. The work will include a theoretical analysis and create a mathematical-physical model of processes, including experimental verification (description, system identification) and modeled first one burner segment), later or the entire burner. Experimental and mainly simulation methods will be used in the development. The doctoral student has a task - describe phenomenologically relevant phenomena, quantify relevant quantities (by measurement, calculation) - propose promising solutions with regard to efficiency and technical, economic, legislative and other constraints. The topic has full technical and material support, especially laboratory equipment, technology and material for experiments. Partial financial support of the student from the project is expected. The topic is related to one or more existing or submitted projects and is solved in cooperation with the company BALÓNY KUBÍCEK spol. s r.o. It is assumed that several months of internship abroad, participation in technical seminars and presentations at conferences.

    Tutor: Jedelský Jan, prof. Ing., Ph.D.

  17. Development of an adaptive automated system for the application of matte coatings for 3D scanning

    The aim is to design and develop a system for automated robotic application of matte sublimation coating for the purposes of 3D scanning with an adaptive nozzle enabling the application of coatings on complex parts. Such a developed system, together with the character of sublimation sprays, will be of great benefit for 3D scanning of parts with complex shape and with problematic optical properties (dark, glossy, transparent) in serial production.

    Tutor: Koutný Daniel, doc. Ing., Ph.D.

  18. Development of magnetorheological dampers for semi-active control

    The aim of the topic is the research and development of a fast magnetorheological damper including algorithms for semi-active control leading vibration and shock mitigation. The R&D can be focused into several fields such as (i) dampers for electric enduro bicycle; (ii) damper for seat suspension of trucks or agricultural machines; (iii) dampers for mitigation of extreme shocks; (iv) dampers for aircraft landing gear; (v) motorcycle dampers. This topic is opened for three students.

    Tutor: Mazůrek Ivan, doc. Ing., CSc.

  19. Development of new systems for friction management in the wheel-rail interface

    The work is focused on the development of new systems for conditioning of the frictional properties in the wheel-rail contact through the application of lubricants, friction modifiers and alternative traction enhancers.

    Tutor: Hartl Martin, prof. Ing., Ph.D.

  20. Development of structured magnetic circuits

    The aim of the topic is the research and development of structured magnetic circuits manufactured by 3D print. The R&D can be focused into several fields such as (i) development of structured rotors of electromotors; (ii) development of pistons for fast magnetorheological dampers; (iii) development of fast electromagnetic valves. The topic is opened for 2 students.

    Tutor: Mazůrek Ivan, doc. Ing., CSc.

  21. Development of technology and applications for additive manufacturing of the spatial structures from thermoplastics

    Qualify the technology of robotic additive manufacturing of spatial trusses in terms of accuracy and reliability.

    Tutor: Koutný Daniel, doc. Ing., Ph.D.

  22. Development of ventilation turbines - saving in energetics

    Functioning optimization of ventilation devices according to patent applications PV 2014-491 (2014/350),PV 2014-492 (2014/351) a PV 2014-493 (2014/349) to which the Brno University of Technology exercises ownership rights on practical functional prototypes. The aim of working is the experimental design development at application software YADE and SOLIDWORKS, RAPID PROTOTYPING technology and results verification on functional prototypes.

    Tutor: Malášek Jiří, doc. Ing., Ph.D.

  23. Diagnosis of electric drives based on machine learning for the safety aplication

    The use of machine learning is widespread today. One of the major problems in this area is the acquisition of relevant learning data. Actual measurement data is technically possible to replace simulation data to some extent. However, the use of models is complicated by simplifying modeling utilization. The aim of the work is to propose a methodology of utilization of mathematical models of electric drives for machine learning usable in the area of diagnostics. Experimental verification on real drives will also be carried out.

    Tutor: Blecha Petr, doc. Ing., Ph.D., FEng.

  24. Digital twin in a predictive maintenance system

    The aim of the dissertation is to describe the use of digital twin components of selected machines in the machinery of a manufacturing company in connection with the system of predictive maintenance. Furthermore, the simulation of any type and number of fault conditions is assumed in order to improve the detection and prediction algorithms of the predictive maintenance system and to provide recommendations on which quantities and at which places it is necessary to start monitoring with suitable sensors and measuring systems. The obtained results will be verified in a selected engineering company.

    Tutor: Hammer Miloš, doc. Ing., CSc.

  25. Dynamics of electric motorcycles

    An electric motorcycle is structurally different from a classic motorcycle. The electric drive unit has significantly different characteristics than the internal combustion engine. All this must be taken into account when designing an electric motorcycle. The aim of the work is to use mathematical models and measurements of motorcycle driving dynamics to analyze the behavior of an electric motorcycle and optimize its parameters.

    Tutor: Porteš Petr, doc. Ing., Ph.D.

  26. Evaluation of optical surface roughness in rolling contacts

    The aim is to develop method for surface topography evaluation reflecting quality of lubrication and surface ability to form coherent lubricating film in rolling contacts. The theme includes measurement on optical tribometer with samples of different surface structure.

    Tutor: Křupka Ivan, prof. Ing., Ph.D.

  27. Extension of longevity of joint implants by targeted modification of rubbing surfaces

    The main goal of research is to design, produce, and validate the effect of targeted topography modification of joint implant contact surfaces on friction coefficient and wear rate. Experimental investigation is based on the use of hip joint simulator. Compared to conventional implants, a prototype of new-generation implant with extended longevity represents an outcome of the thesis.

    Tutor: Vrbka Martin, prof. Ing., Ph.D.

  28. Flow manipulation devices for passenger car drag reduction

    The topic of thesis is connected with research activity at Institute of Aerospace Engineering following collaboration with Volkswagen AG and Škoda Auto. Fundamental evaluation and assessment of deifferent devices (passive and mainly active) for flow manipulation is main task. The goal is seen in experimental and computational (CFD) assessment of specific active flow concept of aircraft airfoil.

    Tutor: Juračka Jaroslav, doc. Ing., Ph.D.

  29. Flows of non-homogeneous materials in conveying troughs and slip ways

    Laboratory research of flows of non-homogeneous materials inclusive of creation theoretical models with the aim to optimize designs of conveying troughs and slip ways for non-homogeneous materials. Suitable corrections for applying theoretical physical descriptions and empirical descriptions in the technical practice.

    Tutor: Malášek Jiří, doc. Ing., Ph.D.

  30. Flows of non-homogeneous materials out of storage tanks

    Laboratory research of flows of non-homogeneous materials inclusive of creation theoretical models with the aim to optimize designs of bin gates of silos and tanks. Suitable corrections for applying theoretical physical descriptions and empirical descriptions in the technical practice.

    Tutor: Malášek Jiří, doc. Ing., Ph.D.

  31. Fuel nozzles of small turbine engines

    Fuel systems of small turbine engines use various methods of fuel supply to the combustion chamber, so there are different fuel nozzle designs, such as pressure swirl nozzles (simplex / duplex), evaporator tubes, spraying rings or airblast nozzles. Fuel nozzles are a very important part of the whole system, their proper function is a must to ensure sufficient engine efficiency and the fuel nozzle requirements are very high. The fuel system must deliver the exact and actually needed fuel amount to the combustion chamber. It is important to ensure good atomization and evaporation of the fuel and its mixing with the air in the entire speed range (engine control range) and especially at start-up. The work aims to classify the fuel nozzles used in turbine engines with a maximum thrust of up to 5000 N (or take-off power up to 600 kW) and to focus on a detailed description of the evaporator system and its modifications. The main subject of the work is the development and testing of the existing evaporator nozzle. The doctoral student will prepare a test stand for nozzle operation, equip it with the necessary sensors and will examine the characteristics of these systems in a given range of operating conditions (eg temperature mapping, determining the control range), assess their suitability for specific purposes and further develop the system with a focus on its problematic aspects. The tasks include: technical research and analysis of published technical solutions, their systematic comparison, evaluation of advantages and disadvantages, range of control parameters and energy requirements, description of design solutions and individual parts, analysis and physical description of their function, design and preparation of test stand for nozzle operation , functional analysis and approximate calculation of energy (heat) balance of the evaporator nozzle The topic has full technical and material support, especially laboratory equipment, technology and material for experiments. Partial financial support of the student from the project is expected. The topic is related to an existing or submitted project. The possibility of a several-month internship abroad, participation in technical seminars and presentations at conferences is expected. The work will be solved within the project and in cooperation with the company PBS Velká Bíteš. The practical part of the work will be carried out in PBS testing laboratories and in BUT laboratories.

    Tutor: Jedelský Jan, prof. Ing., Ph.D.

  32. Health monitoring system architecture for aerospace use

    Among aerospace technologies that are currently experiencing large development is health monitoring. The development of health monitoring is taking place both for airframe and for aircraft systems. The Institute of Aerospace Engineering has long record of involvement in research projects aimed at these technologies. In the framework of the Ph.D. work, it is expected to participate on research tasks dedicated to health monitoring of airframes and/or aircraft systems.

    Tutor: Hlinka Jiří, doc. Ing., Ph.D.

  33. Identification of damage occurrence using non-destructive testing methods

    The aim is to develop and verify the methodology of identification and quantification of structural changes occurring in cyclically loaded materials and structures. This will be an experimental work focused on the correlation of results obtained by acoustic emission methods and other non-destructive testing methods (thermography, UT, RT and others).

    Tutor: Mazal Pavel, doc. Ing., CSc.

  34. Influence of non-stationary electric field on behavior of ionic liquids

    The aim is to clarify the mechanism of forming a lubricating film in highly loaded contacts lubricated by ionic liquids under the influence of an unsteady electric field. This is an experimental work based on the use of colorimetric interferometry, which includes the development of an experimental simulator for measuring the friction, thickness and temperature of the lubricant.

    Tutor: Svoboda Petr, doc. Ing., Ph.D.

  35. Inprocess measurement of large workpieces

    The aim of this work is to describe the suitability and capability of measuring large workpieces using workpiece probes and mobile measuring devices. Define the capability of the machine tool as a gauge based on appropriate procedures and metrological principles. This will achieve significant savings both in the field of energy (transport of workpieces to the place of control measurement), but also economic in terms of transport costs and measured on CMM. The expected output of the work is the analysis and description of the influence of setting the geometric and volumetric accuracy of the machine on the resulting controlled size and shape of the workpiece and the use of this knowledge to further refine the prediction of dimensional and shape accuracy of machined parts in precision engineering.

    Tutor: Blecha Petr, doc. Ing., Ph.D., FEng.

  36. Intelligent object distance detection system for autonomous vehicles

    The topic deals with extending existing methods for detecting the distance of an object moving around a vehicle. The method will be based on neural networks, stereo camera or lidar and will focus on quickly determining the distance of the object in adverse weather conditions, where this area is still problematic for driving an autonomous vehicle. The system would be built on products designed for this and tested in operation.

    Tutor: Kučera Pavel, doc. Ing., Ph.D.

  37. Machine learning based diagnosis of electrical drives in relation to the lifetime of drive components

    The use of machine learning is widespread today. One of the major problems in this area is the acquisition of relevant learning data. Actual measurement data is technically possible to replace simulation data to some extent. However, the use of models is complicated by simplifying modeling utilization. The aim of the work is to propose a methodology of utilization of mathematical models of electric drives for machine learning usable in the area of diagnostics. Experimental verification on real drives will also be carried out.

    Tutor: Blecha Petr, doc. Ing., Ph.D., FEng.

  38. Mechanisms of superlubricity in fluid film contacts

    The aim is to elucidate mechanisms of fluid film lubrication of point contact exhibiting coefficient of friction lower than 0.01 referred to as superlubricity. The theme combines measurement of friction and lubricating films by optical methods.

    Tutor: Křupka Ivan, prof. Ing., Ph.D.

  39. Modeling of modern powertrains in the combustion of synthetic fuels.

    The topic is focused on the development of mathematical and control schemes for modern power units comustion synthetic fuels such as SNG, biogas and hydrogen.

    Tutor: Štětina Josef, prof. Ing., Ph.D.

  40. Modelling of population evacuation in risk zones

    With the development of industry and the construction of large units, the potential danger to the population from accidents increases. Linked to this is the need to develop plans to evacuate the population in disaster-stricken areas. In general, two cases can be distinguished where a sufficient number of means of transport must be available to evacuate all residents in the shortest possible time for evacuation; in a less critical case, the population can be gradually withdrawn with small amount of resources. The aim of this work is to model transport operations during evacuation and minimize its completion taking into account all restrictive conditions in relation to the area and the level of risk, such as population density, number and capacity of means of transport, distance of collection points etc.

    Tutor: Šeda Miloš, prof. RNDr. Ing., Ph.D.

  41. Modelling of the wheel-rail interface

    The aim of this work is to create a model for the study of tribological phenomena occurring in the wheel-rail contact. The model will be validated experimentally and utilized to the study of the effect of contaminants, materials for rail head conditioning and third-body layer with respect to frictional properties and other aspect of the contact.

    Tutor: Hartl Martin, prof. Ing., Ph.D.

  42. New generation of bearings for wind energy and their diagnostics

    The main attention is focused on solving partial tasks in the development of a design solution for a new type of bearing for the main rotor bearing of wind turbines and especially on validation tests with emphasis on developing a new system for monitoring and diagnosing reliable operation of the turbine system, especially key parts of the rotor bearing. The main goal is to design and verify online monitoring of bearing condition. A secondary goal of the project is to digitize the process of metrology and quality in production with regard to the safety and quality requirements of target customers.

    Tutor: Mazal Pavel, doc. Ing., CSc.

  43. Numerical simulation of selective laser melting process

    The aim of this work is to develop a numerical computational model of the selective laser melting process, which will take into account the main effects of the process on the formation of individual track welds and their distance and overlap during processing of single layer. The numerical model should provide the prediction of the optimal combination of process parameters for the selected material and provide good agreement with the experimental results. The focus of the work is a numerical simulation supplemented by the necessary experiments to determine the input properties and verify the real behavior.

    Tutor: Koutný Daniel, doc. Ing., Ph.D.

  44. Optimisation of Serviceability in Network Applications

    In applications that serve locations deployed in a large area for certain customer service, it is a typical task to minimise these locations so that each customer has at least one of the centers at the available distance. The problem of coverage for this task has O (2 ^ n) complexity, where n is the number of given places and it is necessary to solve it by heuristic methods for the "large" instances of the problem. However, the task has even more complex formulations considering service capacities and customer requirements. In the dissertation the aim is to apply a general problem solving in the problems of communication of 5G mobile networks and data storage in NoSQL databases.

    Tutor: Šeda Miloš, prof. RNDr. Ing., Ph.D.

  45. Optimization metaheuristics and HPC implementations

    Many optimization tasks related to real engineering problems affecting nonlinearity, multimodality, complexity and various complicated constraints. Metaheuristic optimization presents the following optimization problems using selected artificial intelligence algorithms, several of which were designed at the IAI workplace. The aim of the research is the study, modification and design of new algorithms suitable for solving the so-called NP difficult tasks of engineering practice (quadratic assignment problem, design of optimal controller, stabilization of chaotic systems, etc.) and their effective implementation of HPC.

    Tutor: Matoušek Radomil, prof. Ing., Ph.D.

  46. Polymer gears in space applications

    Gears are a critical part of satellites in Earth's orbit and on scientific space missions. Unlike gears on Earth, they usually transmit very small power at low speeds but with high demands on efficiency and accuracy. Especially due to low weight and the possibility of dry operation, polymer gears have been a frequent choice in recent years. However, current polymeric materials used in aerospace applications show differences in durability and performance. The aim of this work is to clarify the tribological processes in these gears.

    Tutor: Křupka Ivan, prof. Ing., Ph.D.

  47. Polymer gears in space applications

    Gears are a critical part of satellites in Earth's orbit and on scientific space missions. Unlike gears on Earth, they usually transmit very small power at low speeds but with high demands on efficiency and accuracy. Especially due to low weight and the possibility of dry operation, polymer gears have been a frequent choice in recent years. However, current polymeric materials used in aerospace applications show differences in durability and performance. The aim of this work is to clarify the tribological processes in these gears.

    Tutor: Křupka Ivan, prof. Ing., Ph.D.

  48. Prediction of production capacity utilization in an engineering company

    The aim of the work is to predict the utilization of production in a larger company, based on obtaining data from monitoring the condition of machines (condition monitoring) in terms of their parameters using multiparametric diagnostics (vibrodiagnostics, electrodiagnostics, tribodiagnostics, etc.), SAP enterprise information system, status of solved projects, cooperation in the company, etc. The results of the work will provide recommendations for the production planning department and draw attention in time to the lack or freedom of production capacity of the company. To solve the above, advanced mathematical tools and models will be used, machine and deep learning (neural networks), linear and nonlinear regression and various types of autoregressive models AR, ARMA and other suitable analytical models (provided by MATLAB software) will be implemented. The obtained results will be verified in a selected engineering company.

    Tutor: Hammer Miloš, doc. Ing., CSc.

  49. Predictive models of fatigue life of aircraft structures elements

    Institute of Aerospace Engineering has been engaged in fatigue life tests of aircraft structures for many years, but also material tests in order to determine the release properties depending on the type of material, method of processing, surface treatment and / or structural arrangement, for example in the form of a rivet joint. In general, these tests are long-term and expensive, and therefore it is necessary to look for methods and thus ways to predict the fatigue life of aircraft structures so that the results are as consistent as possible with the actual fatigue behavior.

    Tutor: Jebáček Ivo, doc. Ing., Ph.D.

  50. Proactive multiparametric on-line diagnostics of electric drives of machinery

    The topic of the dissertation is focused on a complex solution of multiparametric on-line diagnostics of electric drives of machinery, authoritative evaluation of obtained data, storage in the Internet of Things and subsequent active data processing with feedback on the electric drive and machinery. The obtained results will be verified in a selected engineering company.

    Tutor: Hammer Miloš, doc. Ing., CSc.

  51. Reducing railway noise pollution

    The work is focused on research and development of the system for noise reduction of rail transport by adjusting the friction in the wheel-rail contact through special lubricants and friction modifiers. The system includes apparatus for material application and control system utilizing noise monitoring of rail vehicle.

    Tutor: Hartl Martin, prof. Ing., Ph.D.

  52. Research and development of hydrogel-based artificial cartilage

    The main goal is research and development and complex tribological assessment of hydrogel-based material mimicking synovial joint cartilage. Experimental investigation is based on the use of combination of biotribology simulators. A new material, suitable for cartilage replacement to prevent the need of total joint arthroplasty, represents an outcome of the thesis.

    Tutor: Vrbka Martin, prof. Ing., Ph.D.

  53. Research and development of hydrostatic bearing based on adaptive control loops

    The aim is to develop, manufacture and experimentally verify a demonstrator of energy-efficient hydrostatic bearing based on adaptive control loops. The research will focus on the analysis of the response of adaptive control loops, diagnostics, and feedback control. The system will make it possible to simulate and analyse operating conditions to be efficient and to prevent possible failures and errors.

    Tutor: Svoboda Petr, doc. Ing., Ph.D.

  54. Research and development of magnetorheological fluid seal

    The main goal of this topic is an innovation of magnetorheological fluid seal which allows a high level of tightness with respect to the possible leakage of the carrier fluid in extreme conditions. This is an experimental work using the existing experimental devices. The topic is opened for 1 student.

    Tutor: Mazůrek Ivan, doc. Ing., CSc.

  55. Research and development of magnetorheological fluids

    The main aim is the research and development of high stable magnetorheological fluid with high magnetorheological effect, enhanced response time, long lifetime and tribological properties with minimal abrasive effect on contact pairs. The topic is also focused on the study of the rheological behavior of new MR fluids, especially at high shear rates and strong magnetic field. This topic is opened for three students.

    Tutor: Mazůrek Ivan, doc. Ing., CSc.

  56. Research and development of multi-material 3D printing using SLM technology

    The aim is to investigate the influence of process parameters on the multi-material interface of various combinations of metallic materials created by additive approach using Selective Laser Melting (SLM). Part of the work is the implementation of the in-house developed powder dosing device into the build chamber of 3D printer SLM 280HL and debugging of selective application of thin layers. This is necessary for processing of multiple metal materials within single component.

    Tutor: Koutný Daniel, doc. Ing., Ph.D.

  57. Research of Thermomechanical Behaviour of Turbocharger Rotors

    The aim of the work is to describe the influence of thermomechanical loading on the behavior of turbocharger rotors of internal combustion engines. Activities include research into the energy flows in the rotor due to heat transfer on the impellers and in interaction with operating fluids. The use of a multibody dynamics (ADAMS), computational fluid dynamics (ANSYS FLUENT, ANSYS CFX) and finite element method (ANSYS Mechanical) within commercial software with subsequent verification using a specialised technical experiment is assumed. The verified computational model will then be applied to a real turbocharger and verified by means of technical experiments on a test stand. During the study, close cooperation with an industrial partner and real application of work results are expected. The study includes a long-term internship at a world-renowned research facility abroad, regular participation in international conferences in the field and publications in journals.

    Tutor: Novotný Pavel, prof. Ing., Ph.D.

  58. Smart CNC machine tools

    The synonym of cleverness can be understood differently for a technical object of the CNC machine tool type. It can be the application of neural networks, mobility, elements of Industry 4.0, etc. The aim of the dissertation is to set a standard for the concept of a smart CNC machine tool using system analyzes, measurements and conclusions. Everything will be demonstrated on the selected machine type

    Tutor: Marek Jiří, prof. Dr. Ing., Ph.D., DBA, FEng.

  59. Systematic design of CNC machine tools

    There are a number of methodologies and authorial approaches for the construction of technical objects, especially machine tools. However, these methodologies do not take into account what is characteristic of today's market economy, namely speed. Many of these methodologies take a long time. The aim of the dissertation is to develop an industrially applicable methodology using a systems approach.

    Tutor: Marek Jiří, prof. Dr. Ing., Ph.D., DBA, FEng.

  60. The effect of synovial fluid viscosupplementation on friction and lubrication of cartilage

    The main goal of research is to understand the mechanism of synovial fluid viscosupplementation in order to clarify biotribological performance of joint cartilage. Experimental investigation is based on the use of a tribometer with reciprocating motion. Methodology of determination of specific viscosupplement for individual patients represents an outcome of the thesis.

    Tutor: Vrbka Martin, prof. Ing., Ph.D.

  61. The potential of advanced materials and technologies for lower limb prosthesis design

    The aim of the thesis is to propose a new concept of lower limb prosthesis based on the analysis for specific types of activities such as sports or entertainment. This is a creative work based on the use of advanced materials and new technologies.

    Tutor: Křenek Ladislav, doc. akad. soch., ArtD.

  62. Thermal tire models

    The work is focused on mathematical models and measurement methods for prediction of temperature and tire pressure while driving.

    Tutor: Porteš Petr, doc. Ing., Ph.D.

  63. Total productive maintenance (TPM) in non-series and small series production

    At present, it exists or is in the interest of a number of manufacturing engineering companies to achieve a modern TPM concept across their production and other departments of the company. In common practice, a number of such successfully implemented examples can be found in series production. For industrial companies with the character of non-series and small series production, the implementation of TPM comes with a number of obstacles, the solution of which requires new, modern and non-standard approaches. The dissertation will be devoted to this. In addition to describing common and advanced procedures, it also aims to find, name and solve the process of implementing TPM in non-series and small series production. It is assumed that the obtained results will be verified in a selected engineering company.

    Tutor: Hammer Miloš, doc. Ing., CSc.

  64. Transition to mixed lubrication regime in plain bearings

    The aim is to elucidate mechanisms of transition between fluid film and mixed regime of conformal contacts lubrication. In-situ measurements of friction and lubricating film by optical methods will enable to obtain new and unique results.

    Tutor: Křupka Ivan, prof. Ing., Ph.D.

  65. Tribology of bioimplants produced by Selective Laser Melting (SLM)

    The main goal of research is to assess the development of friction coefficient and wear of fundamental biocompatible materials for small joint replacements produced by SLM technology. Experimental investigation is based on the use of pin-on-plate simulator. The attention will be paid to titanium and cobalt alloys with consideration of DLC coating.

    Tutor: Vrbka Martin, prof. Ing., Ph.D.

  66. Vehicle testing and digital twin

    The topic of the thesis is the development of a digital car twin for the development and testing of autonomous vehicles and ADAS systems.

    Tutor: Porteš Petr, doc. Ing., Ph.D.

  67. Vibration reduction of integrated impellers

    The impellers of modern turbomachines, such as turbochargers, are constructed in an integrated disc and blade design, resulting in low internal damping values and high resonant stresses. The topic of the dissertation is therefore focused on the research of unconventional approaches to reduce the amplitudes of forced oscillations of rotors. The topic is supported by the Josef Bozek National Center of Competence for Surface Vehicles.

    Tutor: Píštěk Václav, prof. Ing., DrSc.

Course structure diagram with ECTS credits

1. year of study, winter semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
9BSZSafety of Machines and Equipment - System Approachcs, en0RecommendedDrExP - 20yes
9DMADesign-managementcs, en0RecommendedDrExP - 20yes
9EMMEmpiric Modelscs, en0RecommendedDrExP - 20yes
9LDMLogistics in Transport and Handlingcs, en0RecommendedDrExP - 20yes
9TSTTheory and Construction of Forming Machinescs, en0RecommendedDrExP - 20yes
9VNPVibration and Noise Powertraincs, en0RecommendedDrExP - 20yes
1. year of study, summer semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
9MORMathematical Methods Of Optimal Controlcs, en0RecommendedDrExP - 20yes
9KARThe Special Desing and Applications of Mobile Robotscs, en0RecommendedDrExP - 20yes
9VDETheory of Visual Style in Designcs, en0RecommendedDrExP - 20yes
1. year of study, both semester
AbbreviationTitleL.Cr.Com.Compl.Hr. rangeGr.Op.
9AJEnglish for Doctoral Degree Studyen0CompulsoryDrExCj - 60yes
9BEISafety Engineeringcs, en0RecommendedDrExP - 20yes
9DDEHistory of Designcs, en0RecommendedDrExP - 20yes
9DSMEngine Dynamicscs, en0RecommendedDrExP - 20yes
9EHDElastohydrodynamicscs0RecommendedDrExP - 20yes
9EXTExperimental Methods in Tribologycs0RecommendedDrExP - 20yes
9FLIFluid Engineeringcs, en0RecommendedDrExP - 20yes
9LKKAircraft Composite Structurescs, en0RecommendedDrExP - 20yes
9MRIRisc Managementcs, en0RecommendedDrExP - 20yes
9MBOMathematical Modeling of Machine Mechanisms cs, en0RecommendedDrExP - 20yes
9MASMethods and Algorithms for System Simulation and Optimizationcs, en0RecommendedDrExP - 20yes
9MOPMethodologies of Scientific Workcs0RecommendedDrExP - 20yes
9MLVMetrology Legal and Industrialcs, en0RecommendedDrExP - 20yes
9MPDModern Access to Diagnostics and Working Life of Technical Systemscs, en0RecommendedDrExP - 20yes
9MDTMultiparametric Diagnostics of Technical Systemscs, en0RecommendedDrExP - 20yes
9PSLAircraft On-Board Systemscs, en0RecommendedDrExP - 20yes
9PDTAdvanced Diagnostics of Technical Systems cs, en0RecommendedDrExP - 20yes
9PTLHeat and Mass Transfercs, en0RecommendedDrExP - 20yes
9RIPControl Motioncs, en0RecommendedDrExP - 20yes
9TSOTheory And Construction of Machine-toolscs, en0RecommendedDrExP - 20yes
9TDCThermodynamics of Power Cyclescs, en0RecommendedDrExP - 20yes
9USZMaintenance of Machinery and Equipmentcs, en0RecommendedDrExP - 20yes
9VPRResearch Project and Its Managementcs0RecommendedDrExP - 20yes
9SESSelected Chapters of Electrical Machinescs, en0RecommendedDrExP - 20yes
9VMTComputational Modeling of the Turbulent Flowcs, en0RecommendedDrExP - 20yes
9ZVMBases of Scientific Metrology and Quality Controlcs, en0RecommendedDrExP - 20yes
9ZLLTesting of Aircraftcs, en0RecommendedDrExP - 20yes