Full-time study

4 years

prof. Ing. Pavel Václavek, Ph.D.

Chairman :
prof. Ing. Pavel Václavek, Ph.D.
Councillor internal :
doc. Ing. Zdeněk Bradáč, Ph.D.
prof. Ing. Pavel Jura, CSc.
doc. Ing. Petr Beneš, Ph.D.
doc. RNDr. Zdeněk Šmarda, CSc.
Councillor external :
prof. Ing. Pavel Ripka, CSc.
Prof. Ing. Roman Prokop, CSc.
doc. Ing. Eduard Janeček, CSc.
prof. Dr. Ing. Alexandr Štefek, Dr.
prof. Ing. Tomáš Vyhlídal, Ph.D.

The doctor study programme "Cybernetics, Control and Measurements" is devoted to the preparation of the high quality scientific and research specialists in various branches of control technology, measurement techniques, automatic systems, robotics, artificial intelligence and computer vision.
The aim is to provide the doctor education in all these particular branches to students educated in university magister study, to make deeper their theoretical knowledge, to give them also requisite special knowledge and practical skills and to teach them methods of scientific work.
Through a systematic and comprehensive view of management and measurement, graduates of the study program successfully apply to key management and managerial positions and functions in which they use system view, knowledge of system analysis and optimal management.

Graduate of doctoral studies is profiled to independent creative work and critical thinking based on the systemic view of both technical and non-technical systems and the world as a whole. The graduate program is equipped with the necessary knowledge of mathematics, physics, electrical engineering, theory and practice of control and regulation, measuring techniques, robotics, artificial intelligence, image processing and other fields of applied electrical engineering and informatics. One of the characteristic features of graduates is the ability to integrate a broad spectrum of knowledge and to create functional technical as well as organizational and economic systems.
All graduates of the doctoral program Cybernetics, Automation and Measurement demonstrate during their studies:
• mathematical, physical and electrotechnical principles relevant to measurement and control;
• electronic measuring systems, embedded systems, communication systems, control theory, automatic control systems and artificial intelligence;
• design and operation of electrotechnical, electronic, measuring, control and communication systems.
The graduates are well versed in modern technologies (Industry 4.0, Artificial Intelligence, Signal Processing, Computer Vision, Advanced Management Methods, Industrial Measurement and Control Systems, Mobile and Stationary Robotics, Communication Systems, Functional and System Security).
The graduates are trained to find the work in technical practice, creative work, research and development, production, management and managerial positions in technical or business firms and companies at the highest qualification levels.

Graduates will apply in particular:
- in research, development and design teams,
- in the field of professional activity in production or business organizations,
- in the academic sphere and in other institutions involved in science, research, development and innovation,
- in all areas of the company where cybernetic systems or cybernetic principles are being applied
Our graduates are particularly experienced in the analysis, design, creation or management of complex measurement or control systems, as well as in the programming, integration, support, maintenance or sale of these systems.

Doctoral studies are carried out according to the individual study plan, which is prepared by the supervisor in the beginning of the study in cooperation with the doctoral student. The individual curriculum specifies all the duties determined in accordance with the BUT Study and Examination Rules, which the doctoral student must fulfill to successfully finish his studies. These responsibilities are time-bound throughout the study period, they are scored and fixed at fixed deadlines.
Students will write and perform tests of obligatory subjects (Selected Chapters of Control Engineering, Selected Chapters of Measurement Techniques and Exam in English before the state doctoral examination), at least two compulsory elective courses in view of the focus of his dissertation, at least two optional subjects (English for PhD students; Quoting in Scientific Practice; Resolving Innovation Assignments; Scientific Publishing from A to Z).
The student may enroll for the state doctoral exam only after all the tests prescribed by his / her individual study plan have been completed. Before the state doctoral exam, the student draws up a dissertation thesis describing in detail the aims of the thesis, a thorough evaluation of the state of knowledge in the area of ​​the dissertation solved, or the characteristics of the methods it intends to apply in the solution.
The defense of the controversy that is opposed is part of the state doctoral exam. In the next part of the exam, the student must demonstrate deep theoretical and practical knowledge in the field of electrical engineering, control technology, cybernetics and measuring techniques. The state doctoral examination is in oral form and, in addition to the discussion on the dissertation thesis, it also consists of thematic areas related to compulsory and compulsory elective subjects.
To defend the dissertation, the student reports after the state doctoral examination and after fulfilling conditions for termination, such as participation in teaching, scientific and professional activity (creative activity) and at least a monthly study or work placement at a foreign institution or participation in an international creative project . The studies are finished by successful defence of the dissertation thesis.

The doctoral studies of a student follow the Individual Study Plan (ISP), which is defined by the supervisor and the student at the beginning of the study period. The ISP is obligatory for the student, and specifies all duties being consistent with the Study and Examination Rules of BUT, which the student must successfully fulfill by the end of the study period. The duties are distributed throughout the whole study period, scored by credits/points and checked in defined dates. The current point evaluation of all activities of the student is summarized in the “Total point rating of doctoral student” document and is part of the ISP. At the beginning of the next study year the supervisor highlights eventual changes in ISP. By October, 15 of each study year the student submits the printed and signed ISP to Science Department of the faculty to check and archive.
Within the first four semesters the student passes the exams of compulsory, optional-specialized and/or optional-general courses to fulfill the score limit in Study area, and concurrently the student significantly deals with the study and analysis of the knowledge specific for the field defined by the dissertation thesis theme and also continuously deals with publishing these observations and own results. In the follow-up semesters the student focuses already more to the research and development that is linked to the dissertation thesis topic and to publishing the reached results and compilation of the dissertation thesis.
By the end of the second year of studies the student passes the Doctor State Exam, where the student proves the wide overview and deep knowledge in the field linked to the dissertation thesis topic. The student must apply for this exam by April, 30 in the second year of studies. Before the Doctor State Exam the student must successfully pass the exam from English language course.
In the third and fourth year of studies the student deals with the required research activities, publishes the reached results and compiles the dissertation thesis. As part of the study duties is also completing a study period at an abroad institution or participation on an international research project with results being published or presented in abroad or another form of direct participation of the student on an international cooperation activity, which must be proved by the date of submitting the dissertation thesis.
By the end of the winter term in the fourth year of study the students submit the elaborated dissertation thesis to the supervisor, who scores this elaborate. The final dissertation thesis is expected to be submitted by the student by the end of the fourth year of studies.
In full-time study form, during the study period the student is obliged to pass a pedagogical practice, i.e. participate in the education process. The participation of the student in the pedagogical activities is part of his/her research preparations. By the pedagogical practice the student gains experience in passing the knowledge and improves the presentation skills. The pedagogical practice load (exercises, laboratories, project supervision etc.) of the student is specified by the head of the department based on the agreement with the student’s supervisor. The duty of pedagogical practice does not apply to students-payers and combined study program students. The involvement of the student in the education process within the pedagogical practice is confirmed by the supervisor in the Information System of the university.

1. Research of methods to improve localization accuracy inside buildings

   Research of indoor localization algorithms and methods based on wireless localization and communication system. Research is focused on assuring of quantitative localization parameters in wireless localization systems to assure quantification of quality and reliability of distance (location) measurement. The research will take advantage of data fusion methods in order to improve location accuracy based on combination of wireless localisation and information from inertial sensors. Research will therefore cover methods of data fusion, filtration and model based estimation to achieve acceptable indoor localization accuracy in challenging indoor conditions. One of the expected research outcomes is a methodology for placement of radio-beacons in order to minimize amount of beacons while maximizing location accuracy.

   Tutor: Bradáč Zdeněk, doc. Ing., Ph.D.

1. round (applications submitted from 01.04.2022 to 15.05.2022)

1. Modeling and analysis of cyber-physical system with a human operator

   Research focused to elimination of the influence of disturbances introduced into the control system by a human operator due to biophysical characteristics of humans. Research will be focused on measuring and modeling of the movement of the upper limbs in connection with cyber-physical control system by means of electro-mechanical element in order to find a method for separating the active ingredient from the movement disturbances caused by, for example, muscle oscillations. Consequently propose a method to eliminate the disturbances. Part of the research will be focused to quantification of benefits of training, thus assessing the impact of neuro-muscular subsystem on the ability of the operator to implement motion with minimal error component. To verify the model and the proposed methods flight simulators provided by the cooperating workplace (UNOB) will be used.

   Tutor: Bradáč Zdeněk, doc. Ing., Ph.D.

2. Objective measurement and assessment in medicine through advanced cybernetic applications

   According to Evidence Based Medicine, the objective evidence is absolutely necessary for right diagnosis and proper selection of therapy. However, suitable methods providing a sufficiently objective index relevant to the symptoms are lacking, for example, in dermatology, diabetology, physiotherapy or oncology. The goal of this project is to find novel objective diagnostic methods using unconventional view of medical problems from the perspective of cybernetics. Research work will be devoted to the development of missing methods for identifying the status of living systems, which will mainly use objective quantification of symptoms (swelling, inflammation, atrophy, blocking, etc.), mostly by accurate multispectral 3D scanning of selected parameters (eg. 3D temperature distribution, accurate 3D volumetric measurement or topological alignment). The research will continue on the results of the H2020 ASTONISH project, which has already achieved the first positive results in this area. In identifying living systems and their failures, the research work will also follow the latest advanced methods of technical cybernetics, including the use of artificial intelligence. The result will be new accurate objective quantification methods that will bring more effective therapy, shorter recovery time, lower costs and higher quality of health care, not only in the above-mentioned medical fields.

   Tutor: Chromý Adam, Ing., Ph.D.