Publikace
2022
KOTRBÁČEK, P.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; RESL, O. HTC Measurement of bottom header power cooling. 2022.
DetailRESL, O.; CHABIČOVSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; RAUDENSKÝ, M. Influence of Porous Oxide Layer on Water Spray Cooling. In Sborník 9th International Conference on Fluid Flow. 2022.
s. 125-1 (125-8 s.) ISBN: 978-1-990800-06-1.
Detail | WWWHNÍZDIL, M. Characterization of the F3 Cooling System. 2022.
Detail2021
HNÍZDIL, M. Heat transfer through insulation. 2021.
DetailHNÍZDIL, M. Study of the effect of spray cooling in various distances, inluding the cooling homogenity. 2021.
DetailHNÍZDIL, M. Cooling Zone Characterization of fullcone nozzles. 2021.
Detail2020
HNÍZDIL, M.; CHABIČOVSKÝ, M.; KOMÍNEK, J. Heat treatment of thin sheets, research methodology to design a cooling system. 28th International Conference on Metallurgy and Materials, 2020, roč. 2020, č. 1,
s. 258-264. ISSN: 2694-9296.
Detail | WWWLEE, T.-W; PARK, J. E.; BELLEROVÁ, H.; RAUDENSKÝ, M.; HNÍZDIL, M. MOMENTUM ANALYSES FOR DETERMINATION OF DROP SIZE AND DISTRIBUTIONS DURING SPRAY ATOMIZATION. Atomization and sprays, 2020, roč. 30, č. 2,
s. 97-109. ISSN: 1044-5110.
Detail | WWWHNÍZDIL, M.; KOMÍNEK, J.; LEE, T.; RAUDENSKÝ, M.; ČARNOGURSKÁ, M.; CHABIČOVSKÝ, M. Prediction of Leidenfrost Temperature in Spray Cooling for Continuous Casting and Heat Treatment Processes. Metals, 2020, roč. 10, č. 11,
s. 1-12. ISSN: 2075-4701.
Detail | WWW | Plný text v Digitální knihovně2019
HNÍZDIL, M.; CHABIČOVSKÝ, M. COOLING EFFICIENCY OF VARIOUS EMULSIONS DURING COLD ROLLING. Technical contribution to the 11 th International Rolling Conference, October 1st-3rd, Sao Paulo, SP, Brazil: 2019.
s. 1-9.
DetailHNÍZDIL, M. WaterWiper - Combined work roll cooling, coolant evacuation and wiper actuator for advanced process control and future roll grades in the cold strip mill. 2019.
Detail2018
TUROŇ, R.; SQUERZI, M.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; SIMEČEK, P.; KREISINGER, M. Development of the tube quenching prototype unit. Acta Metallurgica Slovaca, 2018, roč. 24, č. 3,
s. 251-258. ISSN: 1335-1532.
Detail | WWWLEE,T.W.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Approximate Solution to the Spray Heat Transfer Problem at High Surface Temperatures and Liquid Mass Fluxes. HEAT TRANSFER ENGINEERING, 2018, roč. 0, č. 0,
s. 1-7. ISSN: 1521-0537.
Detail | WWWPOHANKA, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; VOTAVOVÁ, H. Hydraulic descaling of wire coils during pickling program. 2018.
s. 45-48.
DetailHNÍZDIL, M.; CHABIČOVSKÝ, M. Experimental study of in-line heat treatment of 1.0577 structural steel. In 17th International Conference on Metal Forming (METAL FORMING 2018). Procedia Manufacturing. Elsevier, 2018.
s. 1696-1603. ISBN: 9781510869561. ISSN: 2351-9789.
Detail | WWW | Plný text v Digitální knihovně2017
KOTRBÁČEK, P.; CHABIČOVSKÝ, M.; HNÍZDIL, M. Studie výpočtů koeficientů přestupu tepla. 2017.
s. 1-23.
DetailKOTRBÁČEK, P.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; HRABOVSKÝ, J. Work roll cooling. 2017.
s. 1-39.
DetailKOTRBÁČEK, P.; HNÍZDIL, M.; CHABIČOVSKÝ, M. Lubrication - Study of Water spray. 2017.
s. 1-16.
DetailCHABIČOVSKÝ, M.; HNÍZDIL, M. Full Cone Nozzles Study. 2017.
s. 1-23.
DetailKOTRBÁČEK, P.; HNÍZDIL, M. Study of Water spray. 2017.
s. 1-12.
DetailHNÍZDIL, M.; CHABIČOVSKÝ, M., Turoň, R.; Squerzi, M.; Šimeček, P.; Kreisinger, M. Development of the Tube Quenching Prototype Unit in Třinecké Železárny. 2017.
s. 38-39.
Detail | WWWHNÍZDIL, M.; CHABIČOVSKÝ, M. Tests on Full Cone nozzles. 2017.
s. 1-11.
DetailHNÍZDIL, M.; KOTRBÁČEK, P. Heat treatment of rails. Materiali in tehnologije, 2017, roč. 51, č. 2,
s. 329-332. ISSN: 1580-2949.
Detail | WWW2016
POHANKA, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; CHABIČOVSKÝ, M. Comparison of Descaling Nozzles. 2016.
s. 1-22.
DetailCHABIČOVSKÝ, M.; HNÍZDIL, M.; HORSKÝ, J. Měření teplot v provozních podmínkách provozu VT na vyznačených místech bezešvých trubek. 2016.
s. 1-15.
DetailCHABIČOVSKÝ, M.; HORSKÝ, J.; RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. Design of quenching units for heat treatment of tubes. La Metallurgia Italiana, 2016, roč. 2016, č. 1,
s. 23-28. ISSN: 0026-0843.
Detail | WWWHNÍZDIL, M.; CHABIČOVSKÝ, M. Improvement of S355J2 Steel Mechanical Properties by Heat Treatment. 24th INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016.
s. 84-84. ISBN: 978-961-94088-0- 3.
DetailHORSKÝ, J.; HNÍZDIL, M.; CHABIČOVSKÝ, M. Development of Cooling Unit H- profile. 2016.
s. 1-13.
DetailHORSKÝ, J.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; KOTRBÁČEK, P. In- line heat treatment of flat products. In Proceedings European Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, 11 – 13 May 2016, Prague, Czech Republic. Čerčany: Asociace pro tepelné zpracování kovů, 2016.
s. 1-8. ISBN: 978-80-904462-9- 8.
DetailHNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; LEE, T. Heat Transfer during Spray Cooling of Flat Surfaces with Water at Large Reynolds Numbers. Journal of Flow Control, Measurement & Visualization, 2016, roč. 4, č. 3,
s. 104-113. ISSN: 2329-3330.
Detail | WWW | Plný text v Digitální knihovně2015
HORSKÝ, J.; KOTRBÁČEK, P.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; STRÁNSKÝ, M. Heat transfer measurement on run out table voestalpine Stahl. 2015.
s. 1-38.
DetailCHABIČOVSKÝ, M.; HORSKÝ, J.; RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. DESIGN OF QUENCHING UNITS FOR HEAT TREATMENT OF TUBES. In European conference on Heat treatment 2015 a 22nd IFHTSE congres. Miláno: Associazione Italiana di metallurgia, 2015.
s. 1-9. ISBN: 978-88-98990-03- 0.
DetailCHABIČOVSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; STRÁNSKÝ, M. In- line tepelné zpracování ocelových profilů a trubek. Hutnické listy, 2015, roč. 68, č. 2,
s. 14-19. ISSN: 0018-8069.
DetailCHABIČOVSKÝ, M.; HNÍZDIL, M.; TSENG, A.; RAUDENSKÝ, M. Effects of oxide layer on Leidenfrost temperature during spray cooling of steel at high temperatures. International journal of heat and mass transfer, 2015, č. 88,
s. 236-246. ISSN: 0017-9310.
DetailHNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Influence of the impact angle and pressure on the spray cooling of vertically moving hot steel surfaces. Materiali in tehnologije, 2015, roč. 49, č. 3,
s. 333-336. ISSN: 1580-2949.
Detail | WWWSTRÁNSKÝ, M.; BROŽOVÁ, T.; RAUDENSKÝ, M.; HNÍZDIL, M.; TUROŇ, R. Effect of Various Spray Cooling Configurations on Hardness Profile of Tubes. In METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015.
s. 1-6. ISBN: 978-80-87294-58- 1.
DetailHNÍZDIL, M.; CHABIČOVSKÝ, M. Low temperature surface cooling. 2015.
s. 1-34.
Detail2014
CHABIČOVSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; STRÁNSKÝ, M.; KOTRBÁČEK, P. Chlazení trubek. 2014.
s. 1-69.
DetailHORSKÝ, J.; CHABIČOVSKÝ, M.; HNÍZDIL, M.; STRÁNSKÝ, M.; KOTRBÁČEK, P. Chlazení trubek – první testy. 2014.
s. 1-32.
DetailPOHANKA, M.; RAUDENSKÝ, M.; HNÍZDIL, M.; STRÁNSKÝ, M.; KOMÍNEK, J. Heat Transfer Study of Multi–Jet Nozzle and Spray Nozzle. 2014.
s. 1-143.
DetailHORSKÝ, J.; KOTRBÁČEK, P.; HNÍZDIL, M.; STRÁNSKÝ, M.; KVAPIL, J.; BROŽOVÁ, T.; VOTAVOVÁ, H. Development of cooling unit – H- profile. 2014.
s. 1-112.
DetailPOHANKA, M.; RAUDENSKÝ, M.; HNÍZDIL, M.; POLIAK, J.; HŘIBOVÁ, V.; VOTAVOVÁ, H.; BROŽOVÁ, T. Final report - Optimization of Descaling Section for POSCO Himill Plant. 2014.
s. 1-153.
DetailHNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; MAGADOUX, E.; CODE, F. Spray Cooling Unit for Heat Treatment of Stainless Steel Sheets. Advanced Materials Research, 2014, roč. 936, č. 1,
s. 1720-1724. ISSN: 1022-6680.
Detail | WWW2013
HNÍZDIL, M.; POHANKA, M.; RAUDENSKÝ, M.; CHABIČOVSKÝ, M.; STRÁNSKÝ, M. Cooling Tests: 1/preparation of the samples, 2/ tests to be performed. 2013.
s. 1-31.
DetailRAUDENSKÝ, M.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; KOMÍNEK, J. Testing of the WET RJC test bench. 2013.
s. 1-136.
DetailHNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ,M. Influence of impact angle and pressure on spray cooling of vertically moving hot steel surfaces. Program and book of abstracts, 21th Conference on Materials and Technology. Ljubljana, Slovenija: Institute of Metals and Technology, 2013.
s. 85-85. ISBN: 978-961-92518-6- 7.
Detail | WWWRAUDENSKÝ, M.; POHANKA, M.; STRÁNSKÝ, M.; HNÍZDIL, M.; KOMÍNEK, J. Heat transfer study of multi-jet nozzle and spray nozzle. 2013.
s. 1-52.
DetailPOHANKA, M.; KOMÍNEK, J.; RAUDENSKÝ, M.; HRABOVSKÝ, J.; HNÍZDIL, M.; STRÁNSKÝ, M. Study of technology for good flatness of plate. 2013.
s. 1-106.
DetailPOHANKA, M.; RAUDENSKÝ, M.; KOTRBÁČEK, P.; HNÍZDIL, M.; ONDROUŠKOVÁ, J.; STRÁNSKÝ, M. Optimization of Descaling and Cooling of Rolls. 2013.
s. 1-120.
DetailHORSKÝ, J.; LUKS, T.; ONDROUŠKOVÁ, J.; HNÍZDIL, M.; KOMÍNEK, J.; KRIŠTOF, O.; KEJÍK, P. Heat Transfer measurement of secondary cooling in continuous casting. 2013.
s. 1-30.
Detail2012
HNÍZDIL, M.; RAUDENSKÝ, M. Influence of Water Temperature on the Cooling Intensity during Continuous Casting and Hot Rolling. In 21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012). 1st Edition 2012. OSTRAVA: TANGER LTD, 2012.
s. 1-6. ISBN: 978-80-87294-31- 4.
Detail | WWWRAUDENSKÝ, M.; HNÍZDIL, M.; HWANG, J.; LEE, S.; KIM, S. Influence of Water Temperature on The Cooling Intensity of Mist Nozzles in Continuous Casting. Materiali in tehnologije, 2012, roč. 46, č. 3,
s. 311-315. ISSN: 1580-2949.
DetailRAUDENSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; LUKS, T.; KVAPIL, J.; PELÍŠEK, M.; HRAZDIL, V. Measurement of the existing sprayline cooling capacity and determining of upper limit of cooling intensity. 2012.
s. 1-36.
DetailRAUDENSKÝ, M.; POHANKA, M.; HRABOVSKÝ, J.; HNÍZDIL, M.; KOMÍNEK, J.; STRÁNSKÝ, M. Study of technology for good flatness of plates - 1st invoice. 2012.
s. 1-96.
DetailRAUDENSKÝ, M.; POHANKA, M.; ONDROUŠKOVÁ, J.; STRÁNSKÝ, M.; KOTRBÁČEK, P.; HNÍZDIL, M. Optimization of Descaling and Cooling of Rolls - final payment. 2012.
s. 1-106.
DetailPOHANKA, M.; HNÍZDIL, M. Visualization of the nozzles configuration Inquiry 110395. 2012.
s. 1-37.
DetailRAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. Why oxides intensify spray cooling?. The 30th International Steel Industry Conference in Paris. 1. Paris: 2012.
s. 92-93.
DetailCHABIČOVSKÝ, M.; RAUDENSKÝ, M.; HNÍZDIL, M. INFLUENCE OF WATER TEMPERATURE ON HEAT TRANSFER COEFFICIENT IN SPRAY COOLING OF STEEL SURFACES. In ENGINEERING MECHANICS 2012. Svratka: J. Náprstek, C. Fischer, 2012.
s. 126-127. ISBN: 978-80-86246-39- 0.
Detail | WWW2011
RAUDENSKÝ, M.; HNÍZDIL, M.; LEE, S.; KIM, S.; HWANG, J. Influence of Water Temperature on Cooling Intensity of Mist Nozzles in Continuous Casting. In 19th Conference on Materials and Technology. Ljubljana 2011: 2011.
s. 60-70. ISBN: 978-961-92518-4- 3.
DetailHNÍZDIL, M.; RAUDENSKÝ, M. Descaling by Pulsating Water Jet. In METAL 2010, 19th International Conference on metallurgy and Materials. Rožnov pod Radhoštěm: Tanger spol. s r.o., 2011.
s. 43-48. ISBN: 978-80-87294-17- 8.
DetailRAUDENSKÝ, M.; POHANKA, M.; HNÍZDIL, M.; MARMONIER, F. COOLING SYSTEMS FOR CONTINOUS GALVANIZING LINE. In 20th Anniversary International Conference on Metallurgy and Materials - Metal 2011 - Conference Proceedings - Papers. 1. Brno: Tanger Ltd, 2011.
s. 779-785. ISBN: 978-80-87294-24- 6.
Detail2010
HNÍZDIL, M.; RAUDENSKÝ, M. Descaling by Pulsating Water Jet. In Sborník konference. Tanger s.r.o., 2010.
s. 43-48. ISBN: 978-80-87294-15- 4.
DetailRAUDENSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; KOTRBÁČEK, P.; POHANKA, M. In- Line Heat Treatment and Hot Rolling. In International conference on advances in materials and processing technologies (AMPT2010). 1. 2010.
s. 563-568. ISBN: 978-0-7354-0871- 5.
Detail2007
HNÍZDIL, M.; BOHÁČEK, J. Obrazová analýza vodního proudu. In Engineering Mechanics 2007. Prague: Academy of Science of the Czech Republic, 2007.
s. 79-80. ISBN: 978-80-87012-06- 2.
Detail
*) Citace publikací se generují jednou za 24 hodin.