doc. Ing.

Ondřej Vítek

Ph.D.

FEKT, UVEE – vedoucí ústavu

+420 54114 6701
viteko@vut.cz

Odeslat VUT zprávu

doc. Ing. Ondřej Vítek, Ph.D.

Publikace

  • 2024

    MERGL, V.; PROCHÁZKA, P.; NAGY, M.; ZEIZINGER, L.; VÍTEK, O.; GULAN, L. Power Curve Determination and Electrification of Powertrain System of Harvester Crane Swinging. CROAT J FOR ENG, 2024, roč. 45, č. 2, s. 293-304. ISSN: 1845-5719.
    Detail | WWW

    BÁRTA, J.; TOMAN, M.; LOŠÁK, P.; AARNIOVUORI, L.; VÍTEK, O. Line-Start Permanent Magnet Machines for Low-Power Applications. In 2024 International Conference on Electrical Machines (ICEM). New York: IEEE, 2024. ISBN: 979-8-3503-7060-7.
    Detail | WWW

  • 2023

    SIZONENKO, V.; VÍTEK, O.; HUTÁK, P. Comparison of Demagnetization Behavior of Radial and Halbach Array PMs in Fault-Tolerant Synchronous Machines Operating with Open Phases. In 2023 IEEE 14th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). Chania, Greece: IEEE, 2023. ISBN: 979-8-3503-2077-0.
    Detail | WWW

  • 2022

    ZEMÁNEK, T.; PROCHÁZKA, P.; PAZDERA, I.; MERGL, V.; NERUDA, J.; VÍTEK, O.; ULRICH, R.; STANĚK, L. Operating Characteristics of a Timber Trailer with a Hybrid Drive. Forests, 2022, roč. 13, č. 8, s. 1-15. ISSN: 1999-4907.
    Detail | WWW

    PRIBULLA, D.; VÍTEK, O. Design of a High-speed Solid-rotor Asynchronous Generator for an Expansion Turbine. In Proceedings I of the 28 th Conference STUDENT EEICT 2022 General Papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2022. s. 316-320. ISBN: 978-80-214-6029-4.
    Detail | WWW

    LOLOVÁ, I.; BÁRTA, J.; BRAMERDORFER, G.; BÍLEK, V.; VÍTEK, O. The Optimization of Single-Phase Line-Start Permanent Magnet Synchronous Motor for Household Applications. In 2022 International Conference on Electrical Machines (ICEM). Valencie, Španělsko: IEEE, 2022. s. 774-779. ISBN: 978-1-6654-1432-6.
    Detail | WWW

    KLÍMA, P.; RÚRA, D.; VÍTEK, O. Analysis and Reduction of Eddy Current Losses in High-Speed Solid Outer Rotor Induction Machine. In 2022 International Conference on Electrical Machines (ICEM). Proceedings on International Conference on Electrical Machines. Valencie, Španělsko: Institute of Electrical and Electronics Engineers Inc., 2022. s. 1022-1026. ISBN: 978-1-6654-1432-6. ISSN: 2381-4802.
    Detail | WWW

    SIZONENKO, V.; VÍTEK, O. Literature Overview of Fault Tolerant Electrical Machines. In Proceedings I of the 28th student EEICT 2022 General papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2022. s. 311-315. ISBN: 978-80-214-6029-4.
    Detail | WWW

    KLÍMA, P.; VÍTEK, O. Influence of the magnet shape on the rotor eddy-current losses in the outer rotor permanent magnet synchronous motor. In PROCEEDINGS I OF THE 28TH STUDENT EEICT 2022 GENERAL PAPERS. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2022. s. 326-330. ISBN: 978-80-214-6029-4.
    Detail | WWW

    PRIBULLA, D.; VÍTEK, O. Metódy výpočtu vírivých strát v permanentných magnetoch synchrónnych strojov. Elektrorevue - Internetový časopis (http://www.elektrorevue.cz), 2022, roč. 24, č. 1, s. 21-28. ISSN: 1213-1539.
    Detail | WWW

    SIZONENKO, V.; VÍTEK, O. Preliminary Design and Comparison of 5 Phase and 6 Phase Fault Tolerant Outer Rotor Permanent Magnet Synchronous Machines with Different Electrical Steel. In 2022 IEEE 20th International Power Electronics and Motion Control Conference (PEMC). Brasov, Romania: IEEE, 2022. s. 390-395. ISBN: 978-1-6654-9681-0.
    Detail | WWW

  • 2021

    BÁRTA, J.; KNEBL, L.; BRAMERDORFER, G.; LOLOVÁ, I.; SILBER, S.; VÍTEK, O. Topology Optimization of Rotor Bars Geometry and Arrangement for a Line-Start Permanent Magnet Synchronous Machine. IEEE Access, 2021, roč. 9, č. 1, s. 115192-115204. ISSN: 2169-3536.
    Detail | WWW | Plný text v Digitální knihovně

    KNEBL, L.; BÁRTA, J.; ONDRŮŠEK, Č.; VÍTEK, O.; BRAMERDORFER, G. Multi-objective Optimization of a Line-start Synchronous Machine Using a Self-organizing Algorithm. IEEE Transaction on Magnetics, 2021, roč. 57, č. 6, s. 1-4. ISSN: 0018-9464.
    Detail | WWW

  • 2020

    BÁRTA, J.; KNEBL, L.; VÍTEK, O.; BRAMERDORFER, G.; SILBER, S. Optimization of Line-Start Synchronous Reluctance Machine Amended From an Induction Machine. In USB Proceedings2020 International Conference onElectrical Machines (ICEM). New York: IEEE, 2020. s. 272-277. ISBN: 978-1-7281-9945-0.
    Detail | WWW

    KNEBL, L.; BÁRTA, J.; VÍTEK, O.; ONDRŮŠEK, Č. High-torque Ferrite Assisted Reluctance Machine Winding Comparison. In USB Proceedings2020 International Conference onElectrical Machines (ICEM). New York: IEEE, 2020. s. 1567-1572. ISBN: 978-1-7281-9945-0.
    Detail | WWW

  • 2019

    MACH, M.; VÍTEK, O. Vliv magnetického obvodu na přesnost resolveru. Elektrorevue - Internetový časopis (http://www.elektrorevue.cz), 2019, roč. 21, č. 4, s. 107-113. ISSN: 1213-1539.
    Detail | WWW

  • 2018

    KLÍMA, J.; NERG, J.; BÁRTA, J.; VÍTEK, O. The impact of the rotor slit number on the behavior of high-speed induction motor. Przeglad Elektrotechniczny, 2018, roč. 2018, č. 5, s. 7-13. ISSN: 0033-2097.
    Detail | WWW

  • 2017

    PROCHÁZKA, P.; PAZDERA, I.; VÍTEK, O.; HUTÁK, P. Electric Drive Unit for Forwarder Trailer. In Conference proceeding ABAF. 2017. s. 1-3. ISBN: 978-80-214-5529- 0.
    Detail

    PROCHÁZKA, P.; PAZDERA, I.; VÍTEK, O.; HUTÁK, P. Forwarder Trailer with Auxiliary Electric Drive Unit. ECS Transactions, 2017, č. 1, s. 1-6. ISSN: 1938-5862.
    Detail

    CHERNYAVSKA, I.; VÍTEK, O. Analysis of Air-gap Eccentricity in Inverter Fed Induction Motor by Means of Motor Current Signature Analysis and Stray Flux of Motor. In 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). 1. Tinos, Greece: Michigan State University, 2017. s. 72-76. ISBN: 978-1-5090-0409-6.
    Detail

  • 2016

    CHERNYAVSKA, I.; VÍTEK, O. Analysis of Broken Rotor Bar Fault in a Squirrel-Cage Induction Motor by Means of Stator Current and Stray Flux Measurement. In USB Proceedings 2016 IEEE International Power Electronics and Motion Control Conference (PEMC). 1. Varna, Bulgaria: The Institute of Electrical and Electronics Engineers, 2016. s. 532-537. ISBN: 978-1-5090-1797-3.
    Detail | WWW

    ISHKOVA, I.; VÍTEK, O. Detection and classification of faults in induction motor by means of motor current signature analysis and stray flux monitoring. Przeglad Elektrotechniczny, 2016, roč. 92, č. 4/2016, s. 166-170. ISSN: 0033-2097.
    Detail | WWW

    KLÍMA, J.; VÍTEK, O. The influence of the rotor slits on the performance of high-speed solid-rotor induction machine. In 17th Mechatronika 2016. first edition. Institute of Electrical and Electronics Engineers Inc.: 2016. s. 206-210. ISBN: 978-80-01-05882-4.
    Detail | WWW

    ISHKOVA, I.; VÍTEK, O. Analysis of Induction Motor Faults by Means of Monitoring the Current and Magnetic Flux Density Spectrums. In Speedam 2016 - Proceedings. DIETI - Engimeering School - University of Naples ''Federico II'', 2016. s. 605-610. ISBN: 978-1-5090-4181-7.
    Detail | WWW

  • 2015

    PROCHÁZKA, P.; PAZDERA, I.; VÍTEK, O. Development and experience with ICT based education in sustainably energy. In 2015 IEEE International Conference on Industrial Technology, ICIT 2015. 2015. s. 3264-3269. ISBN: 9781479978014.
    Detail | WWW

    KLÍMA, J.; VÍTEK, O.; MACH, M. Analysis of high speed squirrel cage induction motors. In 2015 IEEE 15th International Conference on Environment and Electrical Engineering. 1. 2015. s. 1302-1305. ISBN: 978-1-4799-7992-9.
    Detail | WWW

    ISHKOVA, I.; VÍTEK, O. Diagnosis of eccentricity and broken rotor bar related faults of induction motor by means of motor current signature analysis. In Proceedings of the 2015 16th International Scientific Conference on Electric Power Engineering (EPE). první. Ostrava, Czech Republic: VSB – Technical University of Ostrava, Faculty of Electrical Engineering and Computer Science, 2015. s. 682-686. ISBN: 978-1-4673-6787-5.
    Detail | WWW

  • 2014

    KLÍMA, J.; VÍTEK, O. Analysis of high- speed induction motor. In 16th Mechatronika 2014. first edition. 2014. s. 1-7. ISBN: 978-80-214-4817- 9.
    Detail

  • 2013

    HÁJEK, V.; VÍTEK, O.; MACH, M. Brushless Alternator in Automotive Applications. In 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies. 2013. s. 1-4. ISBN: 978-1-4673-5270- 3.
    Detail

    HÁJEK, V.; KUCHAŘ, L.; MACH, M.; VÍTEK, O. Small Electric Motors with Integrated Electronic Unit. In 17th International Conference on Electrical Drives and Power Electronics 6th joint Croatian- Slovak Conference EDPE 2013. 2013. s. 200-204. ISBN: 978-953-56937-8- 9.
    Detail

  • 2012

    JANDA, M.; VÍTEK, O.; HÁJEK, V. Noise of Induction Machines. In INDUCTION MOTORS - MODELLING AND CONTROL. 1. 2012. s. 207-224. ISBN: 978-953-51-0843- 6.
    Detail | WWW

  • 2011

    VÍTEK, O.; JANDA, M.; HÁJEK, V.; BAUER, P. Detection of Eccentricity and Bearings Fault Using Stray Flux Monitoring. In Proceedings of the 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives. Bologna, IT: IEEE, 2011. s. 456-461. ISBN: 978-1-4244-9302- 9.
    Detail | WWW

  • 2010

    HUZLÍK, R.; HÁJEK, V.; VÍTEK, O.; BAUER, P. Virtual laboratory of DC machine and Automotive electrical engineering. In Proceedings of EPE- PEMC 2010. Skopje, Republic of Macedonia: 2010. s. S5- 19 (S5-23 s.)ISBN: 978-1-4244-7854- 5.
    Detail

    HÁJEK, V.; KUCHYŇKOVÁ, H.; VÍTEK, O. NEW TYPE OF AXIAL STARTER. Zeszyty Problemowe - Maszyny Elektryczne, 2010, roč. 2010, č. 87, s. 59-62. ISSN: 0239- 3646.
    Detail

    VÍTEK, O.; JANDA, M.; HÁJEK, V. Effects of Eccentricity on External Magnetic Field of Induction Machine. In 15th IEEE Mediterranean Electrotechnical Conference. Valletta, Malta: IEEE, 345 E 47TH ST, NEW YORK, NY 10017 USA, 2010. s. 939-943. ISBN: 978-1-4244-5794- 6.
    Detail | WWW

  • 2009

    VÍTEK, O. Induction machine diagnosis using stator current and magnetic field analysis. Zeszyty Problemowe - Maszyny Elektryczne, 2009, roč. 2009, č. 82, s. 263-264. ISSN: 0239- 3646.
    Detail

  • 2008

    VÍTEK, O.; HÁJEK, V. Design and analysis of an automotive alternator. Prace Naukowe Instytutu Maszin, Napedów i Pomiarów Elektrycznych Politechniki Wroclawskiej, 2008, roč. 1, č. 62, s. 222-226. ISSN: 1733- 0718.
    Detail

    VÍTEK, O.; HÁJEK, V.; MELICHAR, P.; DUROŇ, J. Design and measurement of the low voltage EC- motor. Prace Naukowe Instytutu Maszin, Napedów i Pomiarów Elektrycznych Politechniki Wroclawskiej, 2008, roč. 1, č. 62, s. 216-221. ISSN: 1733- 0718.
    Detail

  • 2007

    DUROŇ, J. AUXILIARY BRUSHLESS DRIVE FOR MOTOR VEHICLES. In XV. International Symposium on Electric Machinery in Prague ISEM 2007. Praha: CVUT Praha, 2007. s. 29-34. ISBN: 978-80-01-03807- 9.
    Detail

    VÍTEK, O.; HÁJEK, V. Analysis, Design and Optimization of the Automotive Slipringless Alternator. In 16th International Conference on Electrical Drives and Power Electronics. Košice: TULIP reklama, 2007. s. 1-4. ISBN: 978-80-8073-868- 6.
    Detail

    VÍTEK, O.; HÁJEK, V. DESIGN AND OPTIMIZATION OF THE BRUSHLESS ALTERNATOR. In XV. International Symposium on Electric Machinery in Prague ISEM 2007. Praha: Czech Technical University in Prague, 2007. s. 172-176. ISBN: 978-80-01-03807- 9.
    Detail

    VÍTEK, O.; HÁJEK, V. HIGH SPEED INDUCTION MACHINES FOR SAWMILL APPLICATIONS. In International Conference on Low Voltage Electrical Machines. Brno: Brno University of Technology, 2007. s. 106-107. ISBN: 978-80-214-3560- 5.
    Detail

    VÍTEK, O.; HÁJEK, V. Detection of the dynamic rotor eccentricity based on the external magnetic field analysis. Prace Naukowe Politechniki Śląskiej. Elektryka, 2007, roč. 2007, č. 203, s. 63-70. ISSN: 1897- 8827.
    Detail

    VÍTEK, O.; HÁJEK, V. DETECTION OF THE DYNAMIC ROTOR ECCENTRICITY BASED ON THE EXTERNAL MAGNETIC FIELD MEASUREMENT. In XLIII International Symposium on Electrical Machines. Poznan, Poland: PTETiS Publishers, 2007. s. 63-64. ISBN: 978-83-921340-3- 9.
    Detail

    DUROŇ, J.; VÍTEK, O.; MELICHAR, P. Auxiliary Brushless Drive for Motor Vehicles. In 16th International Conference on Electrical Drives and Power Electronics. 1. Košice, Slovak Republic: Slovenská elektrotechnická spoločnosť, pobočka pri Fakulte elektrotechniky a informatiky Technickej univerzity v Košiciach, Slovenská republika, 2007. s. 1-4. ISBN: 978-80-8073-868- 6.
    Detail

  • 2006

    Ondřej Vítek. Analýza vnějšího magnetického pole asynchronních strojů. 2006. s. 1 ( s.)
    Detail

    Ondrej VITEK, Vitezslav HAJEK. Magnetic Circuit Asymmetry Determination by External Magnetic Field of Induction Motor Analysis. In XLII International Symposium on Electrical Machines SME 2006. 2006. s. 263 ( s.)
    Detail

    Ondřej Vítek, Vítězslav Hájek. Examination of the rotor eccentricity of the induction motor. In International Conference on Low Voltage Electrical Machines. Brno University of Technology, 2006. s. 273 ( s.)
    Detail

  • 2005

    SIKORA, L., VÍTEK, O., HÁJEK, V. Brushless alternators. In SME 2005 - XLI MIEDZYNARODOWE SYMPOZJUM MASZYN ELEKTRYCZNYCH. Opole - Jarnołtówek, Poland: Polytechnika Opolska, 2005. s. 631 ( s.)ISBN: 83-88492-74- 8.
    Detail

    Ondřej Vítek, Vítězslav Hájek. Úvod do diagnostiky asynchronních motorů. In EPVE 2005 Elektrické pohony a výkonová elektronika. Vysoké učení technické v Brně, 2005. s. 196 ( s.)ISBN: 80-214-3052- 4.
    Detail

    VÍTEK Ondřej, HÁJEK Vítězslav. Rotor eccentricity determination by measurement of magnetic field. In XIII. International Symposium On Electric Machinery In Prague ISEM 2005. Czech Technical University in Prague, 2005. s. 188 ( s.)ISBN: 80-01-03328- 7.
    Detail

    Ondřej Vítek, Vítězslav Hájek. Induction Motor Condition Monitoring by Leakage Magnetic Field Analysis. In Low Voltage Electrical Machines. Department of Power Electrical and Electronic Engineering, 2005. s. 128 ( s.)ISBN: 80-214-3047- 8.
    Detail

    Ondřej VÍTEK, Vítězslav HÁJEK. Induction machine analysis provided by magnetic field measurement. In XLI Internacional Symposium on Electrical Machines. Technical University of Opole, Poland, 2005. s. 398 ( s.)ISBN: 83-88492-74- 8.
    Detail

  • 2004

    VÍTEK, O., HÁJEK, V. PRACTICAL MEASUREMENT OF MAGNETIC FIELD AROUND ELECTRICAL APPLIANCES. In Low Voltage Eletrical Machines. Department of Power Electrical and Electronic Engineering, Faculty of Electrical Engineering and Communication, Brno University of Technology, 2004. s. 139 ( s.)ISBN: 80-214-2632- 2.
    Detail

    VÍTEK, O., HÁJEK, V. TIME BEHAVIOURS MEASUREMENT OF EXTERNAL MAGNETIC FIELD OF INDUCTION MOTOR. In EPVE 2004 Elektrické pohony a výkonová elektronika. Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, Ústav výkonové elektrotechniky a elektroniky, 2004. s. 281 ( s.)ISBN: 80-214-2766- 3.
    Detail

    VÍTEK, O., HÁJEK, V. MEASUREMENT OF EXTERNAL MAGNETIC FIELD AROUND ELECTRICAL MACHINES. In XII. International Symposium on Electric Machinery in Prague ISEM 2004. Czech Technical University in Prague, 2004. s. 119 ( s.)ISBN: 80-01-03061- X.
    Detail

    VÍTEK, O. EXTERNAL MAGNETIC FIELD ANALYSIS OF INDUCTION MOTOR. In Student EEICT 2004, Volume 3. Brno: 2004. s. 540 ( s.)ISBN: 80-214-2636- 5.
    Detail

    SIKORA, L., VÍTEK, O., HÁJEK, V. Studie problematiky bezkroužkových aletrnátorů pro automobilový průmysl. 1. Brno: Magneton a.s., 2004. s. 0 ( s.)
    Detail

  • 2003

    VÍTEK, O., HÁJEK, V. External magnetic field analysis of electrical machines. In Low Voltage Electrical Machines. Brno: 2003. s. 125 ( s.)ISBN: 80-214-2308- 0.
    Detail

*) Citace publikací se generují jednou za 24 hodin.