Vysoké učení technické v Brně - Vnitřní projekty VUT

- plně financující (2017-01-01 - 2018-12-31)

FSI-S-17-4386

čeština

Houfek Lubomír, Ing., Ph.D. - hlavní řešitel
Bednár Peter, Ing. - spoluřešitel
Benešovský Marek, Ing. - spoluřešitel
Halabuk Dávid, Ing., Ph.D. - spoluřešitel
Kotoul Michal, prof. RNDr., DrSc. - spoluřešitel
Náhlík Luboš, prof. Ing., Ph.D. - spoluřešitel
Návrat Tomáš, doc. Ing., Ph.D. - spoluřešitel
Oplt Tomáš, Ing., Ph.D. - spoluřešitel
Padělek Petr, Ing. - spoluřešitel
Peč Michal, Ing. - spoluřešitel
Petruška Jindřich, prof. Ing., CSc. - spoluřešitel
Poduška Jan, Ing., Ph.D. - spoluřešitel
Štegnerová Kateřina, Ing., Ph.D. - spoluřešitel
Vaculka Miroslav, Ing. - spoluřešitel

Ústav mechaniky těles, mechatroniky a biomechaniky
- interní (01.01.2017 - 31.12.2019)
Fakulta strojního inženýrství
- příjemce (01.01.2017 - 31.12.2019)

BENEŠOVSKÝ, M.; NÁVRAT, T.; PETRUŠKA, J. Verification of fast algorithm for cross-roll straightening. In Engineering Mechanics 2017. 2017. p. 134-137. ISBN: 978-80-214-5497-2.
Detail

KOVÁŘ, J.; FUIS, V.; ČTVRTLÍK, R.; TOMÁŠTÍK, J. Influencing the Indentation Curves by the Tilt of the Berkovich Indenter at FEM Modelling of the Steel Nanoindentation. Powder Metallurgy Progress, 2023, vol. 22, no. 1, p. 53-61. ISSN: 1335-8987.
Detail

NEZBEDOVÁ, E.; PINTER, G.; FRANK, A.; HUTAŘ, P.; PODUŠKA, J.;HODAN, J. Accelerated Tests for Lifetime Prediction of PE-HD Pipe Grades. MACROMOLECULAR SYMPOSIA, 2017, vol. 373, no. 1, p. 188-195. ISSN: 1022-1360.
Detail

HUTAŘ, P.; PODUŠKA, J.; ŠMÍD, M.; KUBĚNA, I.; CHLUPOVÁ, A.; NÁHLÍK, L.; POLÁK, J.; KRUML, T. Short fatigue crack behaviour under low cycle fatigue regime. INTERNATIONAL JOURNAL OF FATIGUE, 2017, vol. 103, no. October 2017, p. 207-215. ISSN: 0142-1123.
Detail

OPLT, T.; POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. The Effect of the Free Surface on the Singular Stress Field at the Fatigue Crack Front. Journal of Mechanical Engineering - Strojnícky časopis, 2017, vol. 67, no. 2, p. 69-76. ISSN: 2450-5471.
Detail

KOČIŠ, J.; KELBL, M.; KOČIŠ, T.; NÁVRAT, T. Percutaneous versus open pedicle screw fixation for treatment of type A thoracolumbar fractures. EUR J TRAUMA EMERG S, 2020, vol. 1, no. 1, p. 147-152. ISSN: 1863-9933.
Detail

ŘEHA, B.; VÁCLAVÍK, J.; NÁVRAT, T.; HALABUK, D. Residual Stresses in Railway Axles. In Residual Stresses 2018. 2018. p. 95-100. ISBN: 9781945291890.
Detail

SLÁVIK, O.; HUTAŘ, P.; BERER, M.; GOSCH, A.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L. Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions. Key Engineering Materials (print), 2018, vol. 774, no. 2018, p. 325-330. ISSN: 1013-9826.
Detail

PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry. Engineering Fracture Mechanics, 2018, vol. 203, no. 2018, p. 18-31. ISSN: 0013-7944.
Detail

HUTAŘ, P.; POKORNÝ, P.; PODUŠKA, J.; FAJKOŠ, R.; NÁHLÍK, L. Effect of residual stresses on the fatigue lifetime of railway axle. Procedia Structural Integrity, 2017, vol. 4, no. 2017, p. 42-47. ISSN: 2452-3216.
Detail

OPLT, T.; HUTAŘ, P.; POKORNÝ, P.; NÁHLÍK, L.; CHLUP, Z.; BERTO, F. Effect of the free surface on the fatigue crack front curvature at high stress asymmetry. INTERNATIONAL JOURNAL OF FATIGUE, 2018, vol. 118, no. 2019, p. 249-261. ISSN: 0142-1123.
Detail

OPLT, T.; ŠEBÍK, M.; BERTO, F.; NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P. Strategy of plasticity induced crack closure numerical evaluation. Theoretical and Applied Fracture Mechanics, 2019, vol. 102, no. 1, p. 59-69. ISSN: 0167-8442.
Detail

HALABUK, D.; NÁVRAT, T.; VLK, M. The issue of recommended hole diameters in ASTM E837-13a. In Experimental Stress Analysis 2017. Košice: Technical University of Košice, 2017. p. 8-14. ISBN: 978-80-553-3166-9.
Detail

POKORNÝ, J. Calculation of Static Equilibrium Position of Hydrodynamic Journal Bearings. In ENGINEERING MECHANICS 2019. Prague: Institute of Thermomechanics of the Czech Academy of Sciences, 2019. p. 291-294. ISBN: 978-80-87012-71-0.
Detail

GOSCH, A.; BERER, M.; HUTAŘ, P.; SLÁVIK, O.; VOJTEK, T.; ARBEITER, F.; PINTER, G. Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene. INTERNATIONAL JOURNAL OF FATIGUE, 2020, no. 130, p. 1-11. ISSN: 0142-1123.
Detail

SLÁMA, D.; NÁVRAT, T.; KREJČÍ, P. Experimental FEM validation of the composite recurve bow. In Experimental Stress Analysis 2019. 2019. p. 475-481. ISBN: 978-80-214-5766-9.
Detail

KOVÁŘ, J.; FUIS, V.; TOMÁŠTÍK, J. Influencing the Indentation Curves by the Bluntness of the Berkovich Indenter at the Fem Modelling. In Proceedings of the 14th international conference on local mechanical properties - LMP 2019. Acta Polytechnica CTU Proceedings. Praha: Acta polytechnica CTU proceedings, 2020. p. 131-135. ISBN: 978-80-01-06735-2. ISSN: 2336-5382.
Detail

KOVÁŘ, J.; FUIS, V. FEM simulation of the nanoindentation test with rigid and non-rigid indenter. In Engineering mechanics 2019. Engineering Mechanics .... Praha: Institute of Thermomechanics of the Czech Academy of Sciences, 2019. p. 189-192. ISBN: 978-80-87012-71-0. ISSN: 1805-8248.
Detail

SLÁVIK, O.; HUTAŘ, P.; GOSCH, A.; BERER, M.; VOJTEK, T.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L. Fatigue crack propagation under mixed mode I and III in polyoxymethelene homopolymer. In Key Engineering Materials. Key Engineering Materials (print). Scientific.Net, 2020. p. 404-409. ISBN: 9783035715866. ISSN: 1013-9826.
Detail

OPLT, T.; HUTAŘ, P.; POKORNÝ, P.; NÁHLÍK, L.; BERTO, F. Numerical evaluation of plasticity induced crack closure in 3D structures. Procedia Structural Integrity, 2020, vol. 23, no. -, p. 101-106. ISSN: 2452-3216.
Detail

POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Influence of extension of load spectrum on estimation of residual fatigue lifetime of railway axle. Solid State Phenomena, 2016, vol. 258, no. -, p. 607-610. ISSN: 1012-0394.
Detail

SLÁVIK, O.; VOJTEK, T.; POCZKLÁN, L.; TINOCO NAVARRO, H.; KRUML, T.; HUTAŘ, P.; ŠMÍD, M. Improved description of low-cycle fatigue behaviour of 316L steel under axial, torsional and combined loading using plastic J-integral. Theoretical and Applied Fracture Mechanics, 2022, no. 118, p. 100-112. ISSN: 0167-8442.
Detail

PODUŠKA, J.; DLHÝ, P.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; NÁHLÍK, L. Design of plastic pipes considering content of recycled material. Procedia Structural Integrity, 2020, vol. 23, no. 2019, p. 293-298. ISSN: 2452-3216.
Detail

PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Soil Load on Plastic Pipe and its Influence on Lifetime. Strojnícky časopis, 2019, vol. 69, no. 3, p. 101-106. ISSN: 0039-2472.
Detail

PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; PINTER, G.; NÁHLÍK, L. Lifetime calculation of soil-loaded non-pressure polymer pipes. Key Engineering Materials (print), 2019, vol. 827, no. 2020, p. 141-146. ISSN: 1013-9826.
Detail

PETRUŠKA, J.; NÁVRAT, T.; HOUFEK, L.; ŠEBEK, F.: 57th International Scientific Conference on Experimental Stress Analysis (EAN). Luhačovice (03.06.2019)
Detail