Detail publikace

Analysis of Directly Measured Heat Transfer Coefficients During Special Experiments to Provide Better Understanding of Secondary Cooling During Continuous Casting Process

HORSKÝ, J. ONDROUŠKOVÁ, J. MORAVEC, R. BLAZEK, K. YIN, H.

Originální název

Analysis of Directly Measured Heat Transfer Coefficients During Special Experiments to Provide Better Understanding of Secondary Cooling During Continuous Casting Process

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The cooling intensity of spray nozzles is a very important parameter in the secondary cooling zone of a continuous caster since it has strong impact on cast slab quality and operation. This parameter is characterized by the heat transfer coefficient (HTC), which is one of the boundary conditions for the heat conduction problem. At the Heat Transfer and Fluid Flow Laboratory of Brno University the cooling intensity of nozzles is measured on an experimental apparatus [1], [2]. Temperatures in a test plate are obtained from the measurements and surface temperatures as well as heat transfer coefficients are computed from these temperatures by an inverse heat conduction problem. The standard procedure for measuring the HTC is to position the spray nozzles below a preheated plate. In most continuous casters this configuration only exists in the run-out portion of the machine. The sprays in continuous casters are also spraying from above on to the cast slab and can spray onto the surface of the slab when it is in a vertical position and the sprays are perpendicular to slab surface in almost all cases. A series of experiments were conducted to determine the effect of slab surface orientation on the measured heat transfer coefficient.

Klíčová slova

Heat transfer coefficient, secondary cooling, continuous casting, cooling intensity

Autoři

HORSKÝ, J.; ONDROUŠKOVÁ, J.; MORAVEC, R.; BLAZEK, K.; YIN, H.

Rok RIV

2013

Vydáno

6. 5. 2013

Nakladatel

AISTech 2013

Místo

Pittsburgh,

ISBN

978-1-935117-33-9

Kniha

2013 AISTech Conference Proceedings

ISSN

1551-6997

Periodikum

AIST Association for Iron&Steel Technology

Ročník

2

Stát

Spojené státy americké

Strany od

1401

Strany do

1409

Strany počet

8

URL

http://digital.library.aist.org/pages/PR-364-133.htm

BibTex

@inproceedings{BUT100028,
  author="Jaroslav {Horský} and Jana {Ondroušková} and Rudolf {Moravec} and Kenneth {Blazek} and Hongbin {Yin}",
  title="Analysis of Directly Measured Heat Transfer Coefficients During Special Experiments to Provide Better Understanding of Secondary Cooling During Continuous Casting Process",
  booktitle="2013 AISTech Conference Proceedings",
  year="2013",
  journal="AIST Association for Iron&Steel Technology",
  volume="2",
  pages="1401--1409",
  publisher="AISTech 2013",
  address="Pittsburgh,",
  isbn="978-1-935117-33-9",
  issn="1551-6997",
  url="http://digital.library.aist.org/pages/PR-364-133.htm"
}