Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
KLAKURKOVÁ, L. JULIŠ, M. GEJDOŠ, P. HORYNOVÁ, M.
Originální název
The Use of Microstructural Analysis for the Evaluation of Quality of Double-Wall Pipes
Typ
abstrakt
Jazyk
angličtina
Originální abstrakt
This contribution is based on case studies concerning failure of double-wall pipes due to several factors. Series of double wall-pipes from different suppliers were studied using light and electron microscopy in order to reveal defects which led to the failure of each set of the pipes. Pipes, made of combination of steel and copper were analysed in the initial state and after heat treatment. Heat treatment, was performed by the suppliers, not further specified, and varied between suppliers [1, 2]. Metallographic analysis revealed unsuitable microstructure of steel layers and heterogeneity in Cu layer. More detailed analysis revealed precipitation of Cu-based phase on the Cu-steel interface resulting from heat treatment process, but for one set of tubes, precipitates were observed even in the initial state, probably due to higher temperatures used during the fabrication process, see Fig. 1. Based on the findings, optimization of heat treatment was suggested and one of the suppliers was recommended.
Klíčová slova
heat treatment; steel; copper;, light microscopy; electron microscopy
Autoři
KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; HORYNOVÁ, M.
Vydáno
19. 4. 2016
Nakladatel
Faculty of Metallurgy Technical University of Košice
Místo
Košice
ISBN
978-80-553-2547-7
Kniha
Metallography ´16
Číslo edice
1
Strany od
91
Strany do
Strany počet
BibTex
@misc{BUT124212, author="Lenka {Klakurková} and Martin {Juliš} and Pavel {Gejdoš} and Miroslava {Horynová}", title="The Use of Microstructural Analysis for the Evaluation of Quality of Double-Wall Pipes", booktitle="Metallography ´16", year="2016", edition="1", pages="91--91", publisher="Faculty of Metallurgy Technical University of Košice", address="Košice", isbn="978-80-553-2547-7", note="abstract" }