Detail publikace

Examination of Mechanical Properties and Temperature Resistance of Epoxy Coatings Filled with Secondary Raw Materials

HODUL, J. DROCHYTKA, R. HODNÁ, J.

Originální název

Examination of Mechanical Properties and Temperature Resistance of Epoxy Coatings Filled with Secondary Raw Materials

Typ

článek v časopise - ostatní, Jost

Jazyk

angličtina

Originální abstrakt

Epoxy coatings are used mainly in the construction especially where it is necessary to increase the resistance of concrete floors against mechanical wear, to increase chemical resistance, to prevent dusting and to ensure hygienically clean environment. Epoxy coating is a composite material that consists of epoxy resin cured mainly by polyamine hardener and filler. As a filler is currently used pure silica sand Dorsilit ground to below 0.063 mm and for more demanding applications fine glass flakes with a high proportion of SiO2. The aim of this work is to experimentally examine the possibility of using secondary raw materials as fillers into three types of polymer epoxy coatings, where it seems the most appropriate utilization is waste glass with a high content of SiO2. Based on the evaluation of the test results of tensile properties, Shore hardness and temperature resistance the possibility of replacing the commonly used filler by finely ground waste glass is assessed.

Klíčová slova

epoxy coating, waste glass, tensile strength, Shore hardness, temperature resistance

Autoři

HODUL, J.; DROCHYTKA, R.; HODNÁ, J.

Vydáno

5. 12. 2016

Nakladatel

Applied Mechanics and Materials

Místo

Switzerland

ISSN

1660-9336

Periodikum

Applied Mechanics and Materials

Číslo

861

Stát

Švýcarská konfederace

Strany od

32

Strany do

39

Strany počet

8

BibTex

@article{BUT129373,
  author="Jakub {Hodul} and Rostislav {Drochytka} and Jana {Hodná}",
  title="Examination of Mechanical Properties and Temperature Resistance of Epoxy Coatings Filled with Secondary Raw Materials",
  journal="Applied Mechanics and Materials",
  year="2016",
  number="861",
  pages="32--39",
  doi="10.4028/www.scientific.net/AMM.861.32",
  issn="1660-9336"
}