Detail publikace

Crack Propagation in Various Double Cantilever Beam Geometric Configurations

MALÍKOVÁ, L. ŠIMONOVÁ, H.

Originální název

Crack Propagation in Various Double Cantilever Beam Geometric Configurations

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

A proper description of the crack propagation in real structures is a crucial task of the fracture mechanics. Various fracture criteria for description of the frac-ture response are derived and tested at cracked specimens of different shapes, loads and boundary conditions. These criteria can be of one-parameter or multi-parameter nature. Whereas the one-parameter fracture mechanics is quite well-described and can be applied correctly for brittle materials, the multi-parameter fracture mechanics is still under extensive studies. It has been shown that it can be useful for assessment of crack behavior in materials where the fracture oc-curs in a larger zone around the crack tip. This can be typical for elastic-plastic or quasi-brittle materials. In this work several various geometric configurations of the double cantilever beam are investigated. Although the crack is loaded in mode I, it can deflect from its original direction under some conditions. This phenomenon is investigated by means of the one-parameter as well as multi-parameter fracture mechanics. A generalized form of the maximum tangential stress fracture criterion is applied in order to investigate the initial crack propa-gation direction. The finite element method is used for the numerical simula-tions. The results obtained are discussed thoroughly.

Klíčová slova

Williams expansion, Tangential stress, Multi-parameter fracture mechanics, Over-deterministic method

Autoři

MALÍKOVÁ, L.; ŠIMONOVÁ, H.

Vydáno

15. 7. 2018

Nakladatel

Springer

Místo

Singapore

ISBN

9789811304118

Kniha

Proceedings of the 7th International Conference on Fracture Fatigue and Wear. FFW 2018

ISSN

2195-4364

Periodikum

Lecture Notes in Mechanical Engineering

Ročník

2019

Stát

Spolková republika Německo

Strany od

164

Strany do

170

Strany počet

8

URL

BibTex

@inproceedings{BUT153229,
  author="Lucie {Malíková} and Hana {Šimonová}",
  title="Crack Propagation in Various Double Cantilever Beam Geometric Configurations",
  booktitle="Proceedings of the 7th International Conference on Fracture Fatigue and Wear. FFW 2018",
  year="2018",
  journal="Lecture Notes in Mechanical Engineering",
  volume="2019",
  pages="164--170",
  publisher="Springer",
  address="Singapore",
  doi="10.1007/978-981-13-0411-8\{_}16",
  isbn="9789811304118",
  issn="2195-4364",
  url="https://link.springer.com/chapter/10.1007/978-981-13-0411-8_16"
}