Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
HODUL, J. ŽLEBEK, T. DROCHYTKA, R.
Originální název
Polymer based grout with specially treated hazardous waste
Typ
článek ve sborníku ve WoS nebo Scopus
Jazyk
angličtina
Originální abstrakt
The present research verified the possibility of using specially treated hazardous waste (solidification product) derived from a solidification agent (fly ash from fluidized bed combustion (FA)) and hazardous waste (end-product) as a filler in polymeric grout. Hazardous waste was pre-treated by solidification technology, while within the performed research, a total of two solidification paths were verified. One of them was a dry homogenisation (TOS1) and the other technology was wet granulation of the input materials (TOS2). The use of dry homogenization solidification technology, which is economically less demanding, seems to be more advantageous. Using such specially treated filler was verified by some selected tests and the results indicated grout with a relatively high compressive strength of about 50 MPa and a flexural strength of about 20 MPa. The developed polymeric grout also showed a very good adhesion to a cast basalt, which was tested by the pull-off test and subsequently observed in detail by optical microscope.
Klíčová slova
grout, hazardous waste, tensile strength, polymeric binder
Autoři
HODUL, J.; ŽLEBEK, T.; DROCHYTKA, R.
Vydáno
1. 7. 2019
Nakladatel
IOP Publishing
ISSN
1757-8981
Periodikum
IOP Conference Series: Materials Science and Engineering
Ročník
549
Číslo
1
Stát
Spojené království Velké Británie a Severního Irska
Strany od
50
Strany do
58
Strany počet
9
URL
https://iopscience-iop-org.ezproxy.lib.vutbr.cz/article/10.1088/1757-899X/549/1/012030
BibTex
@inproceedings{BUT157632, author="Jakub {Hodul} and Tomáš {Žlebek} and Rostislav {Drochytka}", title="Polymer based grout with specially treated hazardous waste", booktitle="XXV International Conference and Meeting of Departments, CONSTRUMAT 2019", year="2019", journal="IOP Conference Series: Materials Science and Engineering", volume="549", number="1", pages="50--58", publisher="IOP Publishing", doi="10.1088/1757-899X/549/1/012030", issn="1757-8981", url="https://iopscience-iop-org.ezproxy.lib.vutbr.cz/article/10.1088/1757-899X/549/1/012030" }