Detail publikace

Modeling of elastoplastic behavior of freestanding square thin films under bulge testing

TINOCO NAVARRO, H. HUTAŘ, P. KRUML, T. HOLZER, J.

Originální název

Modeling of elastoplastic behavior of freestanding square thin films under bulge testing

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Bulge testing is an experimental technique applied to the characterization of thin films, with which the mechanical properties are obtained employing numerical and analytical approaches. For rectangular and circular thin films, classical methods have been well adopted to calculate the stresses and strains at the central point without the dependency of its properties. It is due to that the equilibrium conditions are dependent on the curvatures generated at the maximum deflection point. Therefore, the kinematics of the bulged surface can be represented by a spherical cap and cylindrical shapes in these films. For square thin films, the deflected surface presents a complex displacement field that implies the development of analytical models for the estimation of these. In this sense, equations to represent the equibiaxial stress state (central point) for freestanding square thin films are developed and applied in this study. The curvatures are determined using a reviewed nonlinear deflection field. Virtual experiments were driven by applying finite element analysis to validate the stress and strain models through parametric analysis. In order to impose the residual stress in thin films, two approaches of modeling for the simulations are described. In order to validate the applicability of the proposed equations, different cases were presented for the linear elastic analysis, and two examples were developed to characterize elastoplastic behavior (bilinear and nonlinear) from load-deflection curves. The obtained results show that the developed models for square thin films are in good agreement with the finite element simulations since these predicted the stress and strain states with good accuracy.

Klíčová slova

elastoplastic behavior; thin films

Autoři

TINOCO NAVARRO, H.; HUTAŘ, P.; KRUML, T.; HOLZER, J.

Vydáno

1. 7. 2021

Nakladatel

SPRINGER WIEN

Místo

WIEN

ISSN

0001-5970

Periodikum

ACTA MECHANICA

Ročník

232

Číslo

7

Stát

Rakouská republika

Strany od

2715

Strany do

2731

Strany počet

17

URL

https://link.springer.com/article/10.1007/s00707-021-02978-7

BibTex

@article{BUT176955,
  author="Hector Andres {Tinoco Navarro} and Pavel {Hutař} and Tomáš {Kruml} and Jakub {Holzer}",
  title="Modeling of elastoplastic behavior of freestanding square thin films under bulge testing",
  journal="ACTA MECHANICA",
  year="2021",
  volume="232",
  number="7",
  pages="2715--2731",
  doi="10.1007/s00707-021-02978-7",
  issn="0001-5970",
  url="https://link.springer.com/article/10.1007/s00707-021-02978-7"
}