Detail publikace

AN INVERSE IDENTIFICATION OF THE AIR MASS FLOW RATE DISTRIBUTION IN THE AIR CHANNELS OF AN AIR-PCM HEAT EXCHANGER

ZÁLEŠÁK, M. CHARVÁT, P. KLIMEŠ, L.

Originální název

AN INVERSE IDENTIFICATION OF THE AIR MASS FLOW RATE DISTRIBUTION IN THE AIR CHANNELS OF AN AIR-PCM HEAT EXCHANGER

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The paper explores the application of the particle swarm optimization (PSO) method to heat transfer in an air-PCM heat exchanger (PCMHX). The studied PCMHX consisted of PCM- filled aluminum panels with air channels between the panels. The study focused on the air mass flow rate distribution in the air channels of the PCMHX. Ideally, there should be the same air mass flow rates in all air channel of the PCMHX. However, due to the connection of an air duct (with a relatively small cross section area) to the PCMHX, the distribution of air mass flow rates to the air channels was not uniform. In the first step, the direct heat transfer problem was solved with the use of the simulation model of the PCMHX. The proposed numerical model was based on the energy balance approach and programmed in MATLAB. The total air mass flow rate and its distribution to the particular air channels was known (20 air channels were considered) with the average mass flow rate of mAVG = 0.078 kg s−1. The complete heat storage cycle of the PCMHX (charging/discharging of heat) was simulated. In the second step, the total air mass flow rate was considered known but its distribution to the particular air channels was assumed to be unknown. The distribution of the air mass flow rates was sought out with the use of the PSO method from the inverse heat transfer problem where the outlet air temperature evolution in time was known (it was obtained in the first step by the solution of the direct problem). A good accuracy of the inversely identified air mass flow rate distribution was achieved in the study. The relative difference of up to 0.1 % and 1 % between the pre-simulated and optimised scenarios was obtained for parameters Δmmax and σa, respectively.

Klíčová slova

phase change material, inverse identification, particle swarm optimization, mass flow rate

Autoři

ZÁLEŠÁK, M.; CHARVÁT, P.; KLIMEŠ, L.

Vydáno

18. 5. 2022

Nakladatel

Begell House Inc.

ISSN

2379-1748

Periodikum

4th Thermal and Fluids Engineering Conference

Stát

Spojené státy americké

Strany od

1311

Strany do

1316

Strany počet

6

BibTex

@inproceedings{BUT182229,
  author="Martin {Zálešák} and Pavel {Charvát} and Lubomír {Klimeš}",
  title="AN INVERSE IDENTIFICATION OF THE AIR MASS FLOW RATE DISTRIBUTION IN THE AIR CHANNELS OF AN AIR-PCM HEAT EXCHANGER",
  booktitle="Proceedings of the Thermal and Fluids Engineering Summer Conference",
  year="2022",
  journal="4th Thermal and Fluids Engineering Conference",
  pages="1311--1316",
  publisher="Begell House Inc.",
  doi="10.1615/TFEC2022.ees.040737",
  issn="2379-1748"
}