Publications

• 2023

  PROKOP, A.; HEJČL, P.; REKEM, J.; ŘEHÁK, K. VIRTUAL TRACTOR - TOOL FOR AI TESTING. Proceedings of SOFTWARE USER CONFERENCE 2023 CZ&SK. Brno: MSC.Software s.r.o., 2023.
  Detail

  CZAKÓ, A.; ŘEHÁK, K.; PROKOP, A.; LÁŠTIC, D.; REKEM, J.; TROCHTA, M. Static transmission error measurement of various gear-shaft systems by finite element analysis. Journal of Measurements in Engineering, 2023, vol. 12, no. 1, p. 183-198. ISSN: 2335-2124.
  Detail | WWW | Full text in the Digital Library

• 2022

  ŘEHÁK, K.; PROKOP, A. Příprava a realizace měření krátkodobých dějů. 2022. p. 1-80.
  Detail

  SINGH, B.; HOTA, R.; DWIDEDI, S.; JHA, R.; RANJAN, V.; ŘEHÁK, K. Analytical Investigation of Sound Radiation from Functionally Graded Thin Plates Based on Elemental Radiator Approach and Physical Neutral Surface. Applied Sciences - Basel, 2022, vol. 12, no. 15, p. 1-19. ISSN: 2076-3417.
  Detail | WWW

• 2021

  OTIPKA, V.; PROKOP, A.; ŘEHÁK, K.; ZAJAC, R. Modal properties diagnostics of the high-pressure fuel injection pipes in off-road diesel engine. Journal of Measurements in Engineering, 2021, vol. 9, no. 1, p. 48-57. ISSN: 2335-2124.
  Detail | WWW | Full text in the Digital Library

• 2020

  VONDRA, R.; ŘEHÁK, K.; PROKOP, A. STRAIN-STRESS ANALYSIS OF GEAR COUPLING. In ENGINEERING MECHANICS 2020. 2020. p. 520-523. ISBN: 978-80-214-5896-3.
  Detail

  CZAKÓ, A.; ŘEHÁK, K.; PROKOP, A.; RANJAN, V. Determination of static transmission error of helical gears using finite element analysis. Journal of Measurements in Engineering, 2020, vol. 8, no. 4, p. 167-181. ISSN: 2335-2124.
  Detail | WWW | Full text in the Digital Library

  CZAKÓ, A.; ŘEHÁK, K.; PROKOP, A. DETERMINATION OF TRANSMISSION ERROR AT HELICAL GEAR. In ENGINEERING MECHANICS 2020. 2020. p. 118-121. ISBN: 978-80-214-5896-3.
  Detail

  FRAŇOVÁ, Z.; ŘEHÁK, K.; PROKOP, A. TRANSMISSION ERROR OF THE SPIRAL BEVEL GEARS. In ENGINEERING MECHANICS 2020. 2020. p. 138-141. ISBN: 978-80-214-5896-3.
  Detail

  REKEM, J.; PROKOP, A.; ZAJAC, R.; ŘEHÁK, K. VIRTUAL ROPS TESTING ON SUSPENDED AGRICULTURAL TRACTOR. In ENGINEERING MECHANICS 2020. 2020. p. 436-439. ISBN: 978-80-214-5896-3.
  Detail

  VOPAŘIL, J.; PROKOP, A.; ŘEHÁK, K. Influence of a Powertrain Mounting Method on Powertrain Vibration. In Proceedings of the 2020 19th International Conference on Mechatronics – Mechatronika (ME). Prague: Czech Technical University in Prague, Faculty of Electrical Engineering, 2020. p. 200-206. ISBN: 978-1-7281-5601-9.
  Detail

• 2019

  KRPALEK, D.; PROKOP, A.; ŘEHÁK, K.; PÍŠTĚK, V. Souhrnná zpráva o postupu prací za rok 2019. 2019. p. 1-21.
  Detail

  PROKOP, A.; ŘEHÁK, K. Gear Shift Simulation by Using Virtual Prototype. In Vibroengineering PROCEDIA, Vol. 29. Vibroengineering Procedia. 2019. p. 6-11. ISSN: 2345-0533.
  Detail

  KRPALEK, D.; PROKOP, A.; ŘEHÁK, K. Innovative Technology Application for Design of Bogie Drive Components. 2019.
  Detail

  KRPALEK, D.; ŘEHÁK, K.; PROKOP, A.; PÍŠTĚK, V. Souhrnná zpráva o postupu prací za rok 2019. 2019. p. 1-19.
  Detail

  ZAJAC, R.; OTIPKA, V.; PROKOP, A.; ŘEHÁK, K. Vibro-acoustic diagnostics based on the experimental and numerical approach. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. 2019. p. 415-424. ISBN: 978-3-030-54135-4.
  Detail

  ŘEHÁK, K.; KUČERA, P.; PROKOP, A. Application of Virtual Prototype to Heavy-duty Gearbox housing evaluation. In TRANSBALTICA XI: Transportation Science and Technology. Springer International Publishing, 2019. p. 361-368. ISBN: 978-3-030-38665-8.
  Detail | WWW

  PROKOP, A.; ŘEHÁK, K.; ZAJAC, R.; OTIPKA, V. Gear Shift Investigation Using Virtual Prototype. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 415-424. ISBN: 978-3-030-54135-4.
  Detail

  ŘEHÁK, K.; PROKOP, A.; ZAJAC, R.; OTIPKA, V. Acoustic and Vibration Response Analysis of Heavy-Duty Gearbox. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 443-451. ISBN: 978-3-030-54135-4.
  Detail

  OTIPKA, V.; ZAJAC, R.; ŘEHÁK, K.; PROKOP, A. Numerical dynamic analysis of gearbox behaviour. In Acoustics and Vibration of Mechanical Structures—AVMS 2019. Springer Science and Business Media Deutschland GmbH, 2019. p. 433-441. ISBN: 978-3-030-54135-4.
  Detail

• 2018

  KRPALEK, D.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Souhrnná zpráva o postupu prací za rok 2018. 2018. p. 1-31.
  Detail

  KRPALEK, D.; PROKOP, A.; ŘEHÁK, K.; PÍŠTĚK, V. Souhrnná zpráva o postupu prací za rok 2018. 2018. p. 1-29.
  Detail

  JONÁK, M.; HLOUŠEK, D.; ŘEHÁK, K. Experimental verification of the power required for the movement of the tracked vehicle. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational Ltd., 2018. p. 123-127. ISSN: 2345-0533.
  Detail

  KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. MEASUREMENT OF THE POWERTRAIN TORQUE. In Engineering Mechanics 2018. 1. 2018. p. 449-452. ISBN: 978-80-86246-88-8.
  Detail

  PROKOP, A.; KUČERA, P.; ŘEHÁK, K. Heavy-Duty Transmission Gear Shift Investigation by Virtual Prototypes. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 226-230. ISSN: 2345-0533.
  Detail | WWW | Full text in the Digital Library

  ZAJAC, R.; PROKOP, A.; ŘEHÁK, K. Determination of the modal parameters on the thin flat structures. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational Ltd., 2018. p. 91-95. ISSN: 2345-0533.
  Detail

  KUČERA, P.; PÍŠTĚK, V.; ŘEHÁK, K.; PROKOP, A. Transmission error analysis of the gearbox. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2018. p. 705-708. ISSN: 1822-296X.
  Detail

  KUČERA, P.; PÍŠTĚK, V.; ŘEHÁK, K.; PROKOP, A. Kinematics of the front axle of All-Terrain Vehicle. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2018. p. 560-563. ISSN: 1822-296X.
  Detail

  BARTOŠOVÁ, D.; OTIPKA, V.; ŘEHÁK, K. Determination of transmission error in spur gear by numerical approach. In Vibroengineering PROCEDIA. Vibroengineering Procedia. 2018. p. 284-288. ISSN: 2345-0533.
  Detail

  ZAJAC, R.; ŘEHÁK, K.; PROKOP, A. Investigation of the Harmonic Response on the Simple Structure in Structural and Acoustic Domain by Experimental and Numerical Approach. In Transport Means 2018. Transport Means. Kaunas University of Technology: 2018. p. 669-672. ISSN: 1822-296X.
  Detail

  ŘEHÁK, K.; KUČERA, P.; PROKOP, A. Parameter effecting the experimental determination of modal properties. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 96-100. ISSN: 2345-0533.
  Detail | WWW | Full text in the Digital Library

  KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Transmission error analysis for heavy-duty gearbox. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 113-116. ISSN: 2345-0533.
  Detail | WWW | Full text in the Digital Library

• 2017

  PROKOP, A.; KOPEČKOVÁ, B.; ŘEHÁK, K. Gear Drive System Simulation of Input Parameters Effect on Rattle. In Acoustics and Vibration of Mechanical StructureS. Springer Proceedings in Physics. 1. Springer, Cham, 2017. p. 381-388. ISBN: 9783319698236. ISSN: 0930-8989.
  Detail

  PROKOP, A.; KOPEČKOVÁ, B.; ŘEHÁK, K. Dynamic Analysis of Single Stage Gearbox Focused on Input Parameters Influence. In Transport Means 2017. Transport Means. Kaunas Lithuania: 2017. p. 479-484. ISSN: 1822-296X.
  Detail

  PROKOP, A.; ŘEHÁK, K. VIRTUAL PROTOTYPE APPLICATION TO HEAVY-DUTY VEHICLE GEARBOX CONCEPT. In Engineering Mechanics 2017. 1. 2017. p. 810-813. ISBN: 978-80-214-5497-2.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L.; PROKOP, A.; ŘEHÁK, K. Modelling the powertrain rubber coupling under dynamic conditions. Journal of Vibroengineering, 2017, vol. 19, no. 5, p. 3710-3719. ISSN: 1392-8716.
  Detail

  KRPALEK, D.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Souhrnná zpráva o postupu prací za rok 2017. 2017. p. 1-20.
  Detail

  ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Gear Drive System Simulation with Different Model of Input Speed. In Acoustics and Vibration of Mechanical Structures—AVMS-2017. Springer Proceedings in Physics. 1. Springer, Cham, 2017. p. 331-339. ISBN: 9783319698236. ISSN: 0930-8989.
  Detail

  ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Dynamic Analysis of Single Stage Gearbox with Backlash Influence. In Transport Means 2017. Transport Means. Kaunas Lithuania: 2017. p. 575-579. ISSN: 1822-296X.
  Detail

  ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Numerical simulation of gearbox structure dynamics focused on backlash influence. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Geliu ratas 15A, LT-50282, Kaunas, Lithuania: JVE International Ltd., 2017. p. 115-120. ISSN: 2345-0533.
  Detail

  NOVOTNÝ, P.; DLUGOŠ, J.; PROKOP, A.; ŘEHÁK, K.; RAFFAI, P. Effective computational model for a solution of turbocharger rotor dynamics. Journal of Vibroengineering, 2017, vol. 19, no. 2, p. 724-736. ISSN: 1392-8716.
  Detail

• 2016

  ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M. Comparison of Torque Influence on Single Stage Gearbox Vibrations. In KOKA 2016. Brno: 2016. p. 173-178. ISBN: 978-80-214-5379- 1.
  Detail

  ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M.; NOVOTNÝ, P. INVESTIGATION OF SINGLE STAGE GEARBOX PARAMETERS INFLUENCING SURFACE NORMAL VELOCITY. In Engineering Mechanics 2016. 2016. p. 478-481. ISBN: 978-80-87012-59- 8.
  Detail

  ŘEHÁK, K.; PROKOP, A. Numerical simulation of single stage gearbox with tooth damage. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2016. p. 88-92. ISSN: 2345-0533.
  Detail

  NOVOTNÝ, P.; ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M. Solution of dynamics and acoustics by virtual powertrain. In Engineering Mechanics 2016. PRAGUE, CZECH REPUBLIC: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, 2016. p. 482-486. ISBN: 978-80-87012-59- 8.
  Detail

  ZUBÍK, M.; PROKOP, A.; ŘEHÁK, K. Investigation of single stage gearbox parameters including variable torque conditions. In Transport Means 2016. Transport Means. Kaunas, Lithuania: Technologija, 2016. p. 720-724. ISSN: 1822-296X.
  Detail

  NOVOTNÝ, P.; PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K. Investigating the influence of computational model complexity on noise and vibration modeling of powertrain. Journal of Vibroengineering, 2016, vol. 18, no. 1, p. 378-393. ISSN: 1392-8716.
  Detail | WWW | Full text in the Digital Library

  NOVOTNÝ, P.; PROKOP, A.; ŘEHÁK, K. Complex strategy for a development of highly elastic couplings. In Vibroengineering PROCEDIA. Vibroengineering Procedia. 7. Geliu ratas 15A, LT-50282,Kaunas, Lithuania: JVE International Ltd., 2016. p. 97-102. ISSN: 2345-0533.
  Detail

• 2015

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Complex Evaluation of Transmission NVH Parameters. In Transport Means 2015. Transport Means. Kaunas: Kaunas University of Technology, 2015. p. 563-566. ISSN: 1822-296X.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Approach for Assessment of Experimental Gearbox NVH Parameters. In FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY V. 1. Hong Kong, PEOPLES R CHINA: DESTECH PUBLICATIONS, INC, 439 DUKE STREET, LANCASTER, PA 17602-4967 USA, 2015. p. 266-271. ISBN: 978-1-60595-270-3.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. VIRTUAL GEARBOX DEVELOPMENT AND VERIFICATION. In KOKA 2015. Bratislava: Faculty of Mechanical Engineering, Slovak University of Technology and Designing, Department of Cars, Ships and Combustion Engines, 2015. p. 239-244. ISBN: 978-80-227-4424- 9.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Computational tools for transmission dynamics modelling. In Setkání uživatelů MSC. SOFTWARE 2015. 1. MSC.Software s.r.o., 2015. p. 146-150.
  Detail

  ZUBÍK, M.; PROKOP, A.; ŘEHÁK, K.; NOVOTNÝ, P. The effect of the gear parameters to the noise of transmission. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2015. p. 357-362. ISSN: 2345-0533.
  Detail

  PROKOP, A.; ŘEHÁK, K.; ZUBÍK, M.; NOVOTNÝ, P. Experimental Validation of the Gearbox NVH Parameters. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 2, p. 16-21. ISSN: 1214- 0821.
  Detail

• 2014

  ŘEHÁK, K.; SKALLERUD, B. Micro- CT Based Imaging and Numerical Analysis of Bone Healing. In Local Mechanical Properties X. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 141-144. ISBN: 978-3-03835-062- 0. ISSN: 1013- 9826.
  Detail

  ŘEHÁK, K.; SKALLERUD, B. Strain analysis of bone healing. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. p. 540-544. ISBN: 978-80-214-4871-1.
  Detail

  MATUG, M.; VAŠEK, M.; MIŠUN, V.; NAVRÁTIL, P.; ŘEHÁK, K.; CIVÍN, A. Computational model of voice producting element in terms of varying inlet pressure. Engineering Mechanics, 2014, vol. 21, no. 4, p. 211-218. ISSN: 1805- 4633.
  Detail

• 2013

  VALÁŠEK, J.; EBRINGEROVÁ, V.; ŘEHÁK, K.; KRPALEK, D.; FLORIAN, Z. Study of straight and oblique mandible fracture behavior in the chin section. Applied Mechanics and Materials, 2013, vol. 245, no. 1, p. 74-79. ISSN: 1660- 9336.
  Detail

• 2012

  PRÁŠILOVÁ, E.; MARCIÁN, P.; KRPALEK, D.; ŘEHÁK, K.; MALINA, R.; KONEČNÁ, V. Comparative Study of Mechanical Properties of Bone Tissue Based on the CT and the micro- CT Slices. Applied Mechanics and Materials, 2012, vol. 2012, no. 232, p. 152-156. ISSN: 1660- 9336.
  Detail

  VALÁŠEK, J.; ŘEHÁK, K.; KRPALEK, D.; EBRINGEROVÁ, V.; FLORIAN, Z. Finite Element Analysis of Mandible Reconstruction Plate in the case of Symphysis fracture. Advanced Materials Research, 2012, vol. 472- 475, no. 1, p. 1524-1527. ISSN: 1022- 6680.
  Detail

  VALÁŠEK, J.; MARCIÁN, P.; ŘEHÁK, K.; KRPALEK, D.; FLORIAN, Z. STRESS-STRAIN ANALYSIS OF RESTORED FIRST MOLAR TOOTH WITH CAVITY OF CLASS II. Engineering Mechanics, 2012, vol. 19, no. 2, p. 1-11. ISSN: 1802- 1484.
  Detail

• 2011

  MARCIÁN, P.; VALÁŠEK, J.; KRPALEK, D.; ŘEHÁK, K.; FLORIAN, Z.; NAVRÁTIL, P. Computational modeling of dental implant interaction with bone tissue. In 13th Conference APPLIED MECHANICS 2011. Velké Bílovice: Ústav fyziky materiálů AV ČR, 2011. p. 139-142. ISBN: 978-80-87434-03- 1.
  Detail

  ŘEHÁK, K.; FLORIAN, Z.; KRPALEK, D.; MARCIÁN, P.; MATUG, M.; VALÁŠEK, J. Stress analysis of Burch- Schneider cage. In Engineering Mechanics 2011, 17th International Conference. 1. Prague: Institute of Thermomechanics, 2011. p. 523-526. ISBN: 978-80-87012-33- 8.
  Detail

  MARCIÁN, P.; BORÁK, L.; VALÁŠEK, J.; KRPALEK, D.; ŘEHÁK, K.; NAVRÁTIL, P. Creation of Computational Models of Cancellous Bone. In Engineering Mechanics 2011, 17th International Conference. 1. Prague: Institute of Thermomechanics, 2011. p. 379-382. ISBN: 978-80-87012-33- 8.
  Detail | WWW

  VALÁŠEK, J.; MARCIÁN, P.; KRPALEK, D.; ŘEHÁK, K.; MANEK, F.; FLORIAN, Z. Stress Strain Analysis Of Restored First Molar With Cavity Of Class I. In Engineering Mechanics 2011, 17th International Conference. 1. Prague: Institute of Thermomechanics, 2011. p. 635-638. ISBN: 978-80-87012-33- 8.
  Detail

  MARCIÁN, P.; KONEČNÝ, O.; BORÁK, L.; VALÁŠEK, J.; ŘEHÁK, K.; KRPALEK, D.; FLORIAN, Z. On the Level of Computational Models in Biomechanics Depending on Gained Data from Ct/Mri and Micro- Ct. In MENDEL 2011 - 17th International Conference on Soft Computing. 1. Brno: Brno University of Technology, 2011. p. 255-267. ISBN: 978-80-214-4302- 0.
  Detail

  KRPALEK, D.; VALÁŠEK, J.; FLORIAN, Z.; MARCIÁN, P.; ŘEHÁK, K.; MANEK, F. Stress Strain Analysis of Human Wrist and Interaction between Carpal Bones. In 13th Conference APPLIED MECHANICS 2011. Velké Bílovice: Ústav fyziky materiálů AV ČR, 2011. p. 119-122. ISBN: 978-80-87434-03- 1.
  Detail

  MATUG, M.; VAŠEK, M.; MIŠUN, V.; NAVRÁTIL, P.; CIVÍN, A.; ŘEHÁK, K. Analysis of influence of vocal fold - vocal tract models connection by using FEM. In Engineering Mechanics 2011, 17th International Conference. 1. Prague: Institute of Thermomechanics, 2011. p. 391-394. ISBN: 978-80-87012-33- 8.
  Detail

  VALÁŠEK, J.; ŘEHÁK, K.; KRPALEK, D.; MARCIÁN, P.; FLORIAN, Z. Stress Strain Analysis Of Save Firsth Molar Tooth With Cavity Of Class II. In 13th Conference APPLIED MECHANICS 2011. Velé Bílovice: Institute of Physics of Materials, Academy of Science of the Czech Republic, 2011. p. 227-230. ISBN: 978-80-87434-03- 1.
  Detail

*) Publications are generated once a 24 hours.