Ing.

Lucie Malíková

Ph.D.

FCE, STM – Assistant professor

+420 54114 7381
Lucie.Malikova@vut.cz

Send BUT message

Ing. Lucie Malíková, Ph.D.

Publications

  • 2024

    MALÍKOVÁ, L.; DOUBEK, P.; KŘIVÝ, V.; SEITL, S. I+II mixed-mode fatigue crack propagation under combination of tensile loading and corrosion in a HSS specimen. In Procedia of Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2024. p. 17-22. ISSN: 2452-3216.
    Detail | WWW

    MALÍKOVÁ, L.; MIARKA, P. Fatigue crack propagation near a corrosion pit in a HSS specimen. Theoretical and Applied Fracture Mechanics, 2024, vol. 129, no. únor, ISSN: 0167-8442.
    Detail | WWW

    MALÍKOVÁ, L.; BENEŠOVÁ, A.; AL KHAZALI, M.; SEITL, S. Corrosion vs. fatigue in a high-strength steel specimen investigated via FEM. In Procedia Structural Engineering. Procedia Structural Integrity. online: Elsevier, 2024. p. 68-72. ISSN: 2452-3216.
    Detail | WWW

    SEITL, S.; AL KHAZALI, M.; MALÍKOVÁ, L. Appropriate cumulative fatigue damage models for fatigue life estimation applied to high-strength steels. KOVOVE MATERIALY-METALLIC MATERIALS, 2024, vol. 62, no. 1, p. 41-51. ISSN: 1338-4252.
    Detail | WWW

    MALÍKOVÁ, L.; BENEŠOVÁ, A.; AL KHAZALI, M.; SEITL, S. Fatigue behavior of high strength steels under various levels of corrosion. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2024. p. 376-381. ISSN: 2452-3216.
    Detail | WWW

  • 2023

    MALÍKOVÁ, L.; BENEŠOVÁ, A.; AL KHAZALI, M.; SEITL, S. High-strength steels: Fatigue and corrosion. Book of abstracts of 24th International Scientific Conference Applied Mechanics 2023. Piešťany, Slovenská republika: 2023. p. 73-74. ISBN: 978-80-227-5294-7.
    Detail

    MALÍKOVÁ, L.; BENEŠOVÁ, A.; AL KHAZALI, M.; KŘIVÝ, V.; SEITL, S. Stress concentration on a corrosion pit. Proceedings of extended abstracts of 21st International Conference Modelling in Mechanics 2023. Velké Losiny: 2023. p. 28-28. ISBN: 978-80-248-4674-3.
    Detail

    MALÍKOVÁ, L.; DOUBEK, P.; JUHÁSZOVÁ, T.; KREJSA, M.; SEITL, S. Fatigue crack propagation under corrosion of high-strength steel. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2023. p. 264-269. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; DOUBEK, P.; JUHÁSZOVÁ, T.; SEITL, S. Stress concetration factor on a corrosion pit. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2023, vol. 23, no. 2, p. 27-30. ISSN: 1804-4824.
    Detail | WWW

    DOUBEK, P.; MALÍKOVÁ, L.; MIARKA, P.; SEITL, S. Laser cladded protective layer on the S960 Change of microhardness in the vicinity of the bi-material interface. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2023. p. 101-106. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; JUHÁSZOVÁ, T.; DOUBEK, P.; KREJSA, M.; SEITL, S. Influence of a corrosion pit on behavior of a nearby crack. In AIP Conference Proceedings. AIP Conference Proceedings. online: Elsevier, 2023. p. 1-7. ISBN: 978-0-7354-4548-2. ISSN: 1551-7616.
    Detail | WWW

    MALÍKOVÁ, L.; DOUBEK, P.; MIARKA, P.; SEITL, S. Numerical modelling of stress field near a crack tip influenced by corrosion. In AIP Conference Proceedings. AIP Conference Proceedings. online: Elsevier, 2023. ISSN: 1551-7616.
    Detail

    BÍLEK, V.; BUJDOŠ, D.; DUBOVSKÝ, V.; KHESTL, F.; PROCHÁZKA, L.; MALÍKOVÁ, L.; MIARKA, P. Development of fracture and other mechanical properties of concretes with different curing. In AIP Conference Proceedings. AIP Conference Proceedings. online: Elsevier, 2023. ISSN: 1551-7616.
    Detail

    MIARKA, P.; MALÍKOVÁ, L.; BÍLEK, V.; BENEŠOVÁ, A.; MERTA, I.; SEITL, S. On the fatigue resistance of high performance concrete. In AIP Conference Proceedings. AIP Conference Proceedings. online: Elsevier, 2023. ISBN: 9780735447615. ISSN: 1551-7616.
    Detail

    MIARKA, P.; SEITL, S.; KLUSÁK, J.; MALÍKOVÁ, L.; MERTA, I.; BÍLEK, V. High-cycle fatigue cracks in concrete investigated by μCT tomography. In Procedia Structural Integrity 43. Procedia Structural Integrity. online: Elsevier, 2023. p. 124-129. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

  • 2022

    MALÍKOVÁ, L.; DOUBEK, P.; JUHÁSZOVÁ, T.; SEITL, S. Fracture parameters of a perpendicular crack with its tip close to a corrosion pit. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2022, vol. 22, no. 2, p. 30-34. ISSN: 1804-4824.
    Detail | WWW

    MALÍKOVÁ, L.; DOUBEK, P.; JUHÁSZOVÁ, T.; KLUSÁK, J.; SEITL, S. Interaction of a fatigue crack and a corrosion dimple in a high-strength steel specimen. In Procedia of Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2022. p. 1082-1089. ISSN: 2452-3216.
    Detail | WWW

    DOUBEK, P.; MALÍKOVÁ, L.; SEITL, S. Analysis of the material properties in the vicinity of bi-material interface made by the laser cladded protective layer on the S960. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2022. p. 1529-1536. ISSN: 2452-3216.
    Detail | WWW

    MALÍKOVÁ, L.; DOUBEK, P.; MIARKA, P.; SEITL, S. Influence of the interphase between laser-cladded metal layer and steel substrate on the fatigue propagation of a short edge crack. Frattura ed Integrita Strutturale, 2022, vol. 16, no. 59, p. 514-524. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    SEITL, S.; BENEŠOVÁ, A.; PASCUAL, Á.; MALÍKOVÁ, L.; BUJDOŠ, D.; BÍLEK, V. Fatigue and fracture properties of concrete mixtures with various water to cement ratio and maximum size of aggregates. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2022. p. 1512-1519. ISSN: 2452-3216.
    Detail | WWW

    MALÍKOVÁ, L.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B. Crack deflection under mixed-mode conditions in the fine-grained composites based on water glass-activated slag. Journal of Multiscale Modeling, 2022, vol. 13, no. 01, p. 1-8. ISSN: 1756-9737.
    Detail | WWW

  • 2021

    MALÍKOVÁ, L.; MIARKA, P.; ŠIMONOVÁ, H. Multi-parameter MTS and SED criterion applied on a crack in an alkali-activated concrete specimen under mixed-mode loading. In Proceedings of 26th International Conference Engineering Mechanics 2020. Brno: Brno University of Technology, 2021. p. 338-341. ISBN: 978-80-214-5896-3.
    Detail

    MALÍKOVÁ, L.; MIARKA, P.; KUCHARCZYKOVÁ, B.; ŠIMONOVÁ, H. Williams expansion utilized for assessment of crack behaviour under mixed-mode loading in alkali-activated fine-grained composite. Fatigue and Fracture of Engineering Materials and Structures, 2021, vol. 44, no. 5, p. 1151-1161. ISSN: 1460-2695.
    Detail | WWW

    MALÍKOVÁ, L.; MIARKA, P.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B. Deflection of an eccentric crack under mixed-mode conditions in an SCB specimen. Construction of Optimized Energy Potential Budownictwo o zoptymalizowanym potencjale energetycznym, 2021, vol. 9, no. 2/2020, p. 79-87. ISSN: 2544-963X.
    Detail | WWW | Full text in the Digital Library

    JUHÁSZOVÁ, T.; MALÍKOVÁ, L.; DOUBEK, P.; MIARKA, P.; SEITL, S. Fatigue behaviour of a short crack in a thin protective layer laser-cladded on a steel substrate. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2021, vol. 21, no. 2, p. 25-29. ISSN: 1804-4824.
    Detail | WWW

    ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; MALÍKOVÁ, L.; MIARKA, P.; LIPOWCZAN, M. Mechanical Fracture and Fatigue Characteristics of Fine-Grained Composite Based on Sodium Hydroxide-Activated Slag Cured under High Relative Humidity. Applied Sciences - Basel, 2021, vol. 11, no. 1, p. 1-20. ISSN: 2076-3417.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; MIARKA, P.; DOUBEK, P.; SEITL, S. Influence of the bi-material interface on the crack propagation through a thin protective layer. In Procedia of Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2021. p. 605-612. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; DOUBEK, P.; MIARKA, P.; SEITL, S. Crack behaviour at the interface of a surface layer applied on a steel substrate by laser cladding. In 13th International Scientific Conference on Civil and Environmental Engineering Young Scientist. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2021. p. 1-6. ISSN: 1757-899X.
    Detail | WWW | Full text in the Digital Library

  • 2020

    MALÍKOVÁ, L.; MIARKA, P.; ŠIMONOVÁ, H. Propagation conditions of an eccentric crack in a semi-circular disk loaded in I+II mixed mode. In SPACE 2019. MATEC Web of Conferences. France: EDP Sciences, 2020. p. 1-0. ISSN: 2261-236X.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; MIARKA, P.; ŠIMONOVÁ, H. Utilization of Williams‘ power series for etimation of crack behavior under mixed-mode loading. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). Switzerland: Trans Tech Publications Ltd., 2020. p. 203-208. ISBN: 978-3-0357-1586-6. ISSN: 1013-9826.
    Detail

    MALÍKOVÁ, L.; VAVRO, L.; VAVRO, M.; KERŠNER, Z. Evaluation of fracture response of Silesian granite specimens via Effective Crack Model Approach and finite element analysis. In 9th International Conference on Materials STructure and Micromechanics of Fracture. Procedia Structural Integrity. Brno, Česká republika: Elsevier, 2020. p. 487-492. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; MIARKA, P.; ŠIMONOVÁ, H. Mixed-mode crack propagation in a semi-circular disc under bending made of an environmental-friendly concrete. In 1st Virtual European Conference on Fracture - VECF1. Procedia Structural Integrity. Italy: Elsevier, 2020. p. 403-410. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    KERŠNER, Z.; VOŘECHOVSKÝ, M.; MALÍKOVÁ, L.; KREJSA, M. Vaclav Vesely 1975-2016. AMSTERDAM: ELSEVIER SCIENCE BV, 2020. p. 2-2.
    Detail | WWW

    MALÍKOVÁ, L.; MIARKA, P.; ŠIMONOVÁ, H. Crack deflection under mixed-mode loading investigated via generalized MTS criterion. In FRACTURE AND DAMAGE MECHANICS: Theory, Simulation and Experiment. AIP conference proceedings. Melville, NY: AIP Publishing, 2020. p. 1-8. ISSN: 0094-243X.
    Detail

    MIARKA, P.; CRUCES, A.; SEITL, S.; MALÍKOVÁ, L.; LOPÉZ-CRESPO, P. Influence of the constraint effect on the fatigue crack growth rate in S355 J2 steel using digital image correlation. Fatigue and Fracture of Engineering Materials and Structures, 2020, vol. 43, no. 8, p. 1703-1718. ISSN: 1460-2695.
    Detail | WWW

    MIARKA, P.; CRUCES, A.; SEITL, S.; MALÍKOVÁ, L.; LOPÉZ-CRESPO, P. Evaluation of the SIF and T-stress values of the Brazilian disc with a central notch by hybrid method. INTERNATIONAL JOURNAL OF FATIGUE, 2020, vol. 135, no. 1, p. 1-12. ISSN: 0142-1123.
    Detail | WWW

    MALÍKOVÁ, J.; MIARKA, P.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B. Numerical analysis of a semi-circular disc with an angled crack loaded in mixed-mode. In Research and Modelling in Civil Engineering 2019. Koszalin: Koszalin University of Technology Publishing House, 2020. p. 71-84. ISBN: 978-83-7365-525-6.
    Detail | WWW | Full text in the Digital Library

  • 2019

    MALÍKOVÁ, L.; MIARKA, P.; ŠIMONOVÁ, H. Crack propagation in mixed-mode specimens described via multi-parameter fracture mechanics. In The 2nd International Conference on Material Strength and Applied Mechanics, 27–30 May 2019, Kiev, Ukraine. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2019. p. 1-5. ISSN: 1757-899X.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; ŠIMONOVÁ, H. Generalized maximum tangential stress criterion in double cantilever beam specimens: choice of the proper critical distance. In Research and Modelling in Civil Engineering 2018. 1. Koszalin: Koszalin University of Technology Publishing House, 2019. p. 199-212. ISBN: 978-83-7365-502-7.
    Detail | WWW

    MALÍKOVÁ, L.; RAVAZI, S.; BERTO, F. Crack propagation in a brittle DCB specimen assessed by means of the Williams’ power expansion. Frattura ed Integrita Strutturale, 2019, vol. 13, no. 48, p. 34-41. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    SEITL, S.; MIARKA, P.; RŮŽIČKA, V.; MALÍKOVÁ, L.; CRUCES, A.; LOPÉZ-CRESPO, P. Approximation of the crack-tip field in fatigue cracks in bridge steel specimens: DIC analysis of different constraint levels. Frattura ed Integrita Strutturale, 2019, vol. 49, no. 1, p. 97-106. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; MIARKA, P. Multi-parameter fracture mechanics: crack path in a mixed-mode specimen. Frattura ed Integrita Strutturale, 2019, vol. 13, no. 49, p. 65-73. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    VAVRO, L.; MALÍKOVÁ, L.; FRANTÍK, P.; KUBEŠ, P.; KERŠNER, Z.; VAVRO, M. An advanced assessment of mechanical fracture parameters of sandstones depending on the internal rock texture features. Acta Geodynamica et Geomaterialia, 2019, vol. 16, no. 2, p. 157-168. ISSN: 1214-9705.
    Detail | WWW

    MALÍKOVÁ, L.; MIARKA, P.; ŠIMONOVÁ, H. Propagation conditions of an eccentric crack in a semi-circular disk loaded in I+II mixed mode. SPACE 2019. Košice: Technická univerzita v Košiciach, 2019. p. 1 (1 s.). ISBN: 978-80-553-3413-4.
    Detail

  • 2018

    MALÍKOVÁ, L.; ŠIMONOVÁ, H. Crack Propagation in Various Double Cantilever Beam Geometric Configurations. In Proceedings of the 7th International Conference on Fracture Fatigue and Wear. FFW 2018. Lecture Notes in Mechanical Engineering. Singapore: Springer, 2018. p. 164-170. ISBN: 9789811304118. ISSN: 2195-4364.
    Detail | WWW

    MALÍKOVÁ, L.; ŠIMONOVÁ, H. Multi-parameter fracture mechanics: Effect of the specimen shape. Young Scientist 2018. Košice: Technical University of Košice, Faculty of Civil Engineering, 2018. p. 1-8. ISBN: 978-80-553-2952-9.
    Detail

    MALÍKOVÁ, L.; KLUSÁK, J. Influence of the Interfacial Transition Zone on crack behavior in a matrix/aggregate system. In 22th European Conference on Fracture. Procedia Structural Integrity. Bělehrad, Srbsko: 2018. p. 1798-1803. ISSN: 2452-3216.
    Detail

    MALÍKOVÁ, L.; RAVAZI, S.; BERTO, F. Crack propagating in a brittle DCB specimen described by using the Williams’ power expansion. 6th International Conference on Crack Paths. Gruppo Italiano Frattura. Verona, Itálie: 2018. p. 317-322. ISSN: 2532-2443.
    Detail

    SEITL, S.; MALÍKOVÁ, L.; RŮŽIČKA, V.; MORENO MORALES, M.; LOPÉZ-CRESPO, P. Williams' expansion‐based approximation of the displacement field in an Al 2024 compact tension specimen reconstructed from optical measurements. Fatigue and Fracture of Engineering Materials and Structures, 2018, vol. 41, no. 10, p. 2187-2196. ISSN: 1460-2695.
    Detail | WWW

    SEITL, S.; MIARKA, P.; RŮŽIČKA, V.; MALÍKOVÁ, L.; MERTA, I. WEDGE SPLITTING TEST: DISPLACEMENT FIELD ANALYSIS BY MULTI-PARAMETER FRACTURE MECHANICS. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2018, vol. 18, no. 2, p. 50-55. ISSN: 1804-4824.
    Detail

    RŮŽIČKA, V.; MIARKA, P.; MALÍKOVÁ, L.; SEITL, S. BRAZILIAN DISC TEST: CALCULATION OF TERMS IN WILLIAMS EXPANSION. In Sborník příspěvků Juniorstav 2018. 2018. p. 613-620. ISBN: 978-80-86433-69-1.
    Detail

    SEITL, S.; MIARKA, P.; RŮŽIČKA, V.; MALÍKOVÁ, L.; MERTA, I. DISPLACEMENT FIELD ANALYSIS IN WEDGE SPLITTING TEST SPECIMEN BY ODM METHOD. In Proceedings of scientific conference Structural Reliability / Modelling in mechanics 2018. Ostrava: VŠB-TUO Ostrava, Fakulta stavební, Katedra stavební mechaniky, 2018. p. 1-7. ISBN: 978-80-248-4175-5.
    Detail

    MALÍKOVÁ, L.; KLUSÁK, J. Multi-parameter fracture mechanics: Crack approaching a bi-material interface. In Local Mechanical Properties. Key Engineering Materials (print). Trans Tech Publications Ltd, 2018. p. 79-84. ISBN: 978-3-0357-1242-1. ISSN: 1013-9826.
    Detail | WWW

  • 2017

    MALÍKOVÁ, L.; KLUSÁK, J. Interaction between edge-crack and aggregate in silicate-based composite. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2017, vol. 17, no. 2, p. 59-64. ISSN: 1213-1962.
    Detail

    MALÍKOVÁ, L.; KLUSÁK, J.; KERŠNER, Z. Assessment of crack stability in a quasi-brittle particle composite. In Structural and Physical Aspect of Construction Engineering. Procedia Engineering. Elsevier, 2017. p. 49-53. ISSN: 1877-7058.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; SEITL, S.; KERŠNER, Z. Multi-parameter fracture mechanics: Practical use. In Research and modelling in civil engineering 2017. 1. Koszalin University of Technology: Publishing House, 2017. p. 1-15. ISBN: 978-83-7365-474-7.
    Detail

    MALÍKOVÁ, L.; VESELÝ, V. Influence of the elastic mismatch on crack propagation in a silicate-based composite. Theoretical and Applied Fracture Mechanics, 2017, vol. 2017, no. 91, p. 25-30. ISSN: 0167-8442.
    Detail

    MALÍKOVÁ, L.; SEITL, S. Application of the Williams Expansion near a Bi-Material Interface. In Key Engineering Materials. Key Engineering Materials (web). 2017. p. 206-209. ISSN: 1662-9795.
    Detail

    RŮŽIČKA, V.; MALÍKOVÁ, L.; SEITL, S. Over-deterministic method: The influence of rounding numbers on the accuracy of the values of Williams' expansion terms. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 42, p. 128-135. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; KLUSÁK, J. Interaction between edge-crack and aggregate in silicate-based composite. Conference on Local Mechanical Properties. 2017. p. 31-32.
    Detail

    SEITL, S.; MIARKA, P.; MALÍKOVÁ, L.; KREJSA, M. Comparison of Calibration Functions for Short Edge Cracks under Selected Loads. In Key Engineering Materials. Key Engineering Materials (print). 2017. p. 353-356. ISBN: 978-3-0357-1168-4. ISSN: 1013-9826.
    Detail

    ŠIMONOVÁ, H.; VYHLÍDAL, M.; KUCHARCZYKOVÁ, B.; BAYER, P.; KERŠNER, Z.; MALÍKOVÁ, L.; KLUSÁK, J. Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement- based composites. Frattura ed Integrita Strutturale, 2017, no. 41, p. 211-219. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    KLON, J.; SOBEK, J.; MALÍKOVÁ, L.; SEITL, S. Impact of specific fracture energy investigated in front of the crack tip of three-point bending specimen. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 41, p. 183-190. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    SEITL, S.; MALÍKOVÁ, L.; SOBEK, J.; FRANTÍK, P.; LOPÉZ-CRESPO, P. Williams expansion-based approximation of the stress field in an Al 2024 body with a crack from optical measurements. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 41, p. 323-331. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; KLUSÁK, J. Vzájemné působení trhliny a zrna kameniva v kompozitu na silikátové bázi. In Modelování v mechanice 2017. Ostrava, Česká republika: 2017. p. 1-6. ISBN: 978-80-248-4010-9.
    Detail

  • 2016

    MALÍKOVÁ, L.; VESELÝ, V.; SEITL, S. Crack propagation direction in a mixed mode geometry estimated via multi-parameter fracture criteria. INTERNATIONAL JOURNAL OF FATIGUE, 2016, vol. 2016, no. 89, p. 99-107. ISSN: 0142-1123.
    Detail

    VYHLÍDAL, M.; ŠIMONOVÁ, H.; VESELÝ, V.; KERŠNER, Z.; KLUSÁK, J.; MALÍKOVÁ, L. Basic features of aggregate-matrix-interface fracture of concrete: pilot modelling. In Advances and Trends in Engineering Sciences and Technologies II. London: Taylor & Francis Group, 2016. p. 309-314. ISBN: 978-1-138-03224-8.
    Detail

    MALÍKOVÁ, L.; KLUSÁK, J.; KERŠNER, Z. Assessment of crack stability in a quasi- brittle particle composite. Space 2016. Košice, Slovenská republika: 2016. p. 1-2. ISBN: 978-80-553-2643- 6.
    Detail

  • 2015

    MALÍKOVÁ, L. Multi-parameter fracture criteria for estimation of crack propagation direction applied to a mixed-mode geometry. Engineering Fracture Mechanics, 2015, vol. 143, no. 2015, p. 32-46. ISSN: 0013-7944.
    Detail

    MALÍKOVÁ, L.; VESELÝ, V.; SEITL, S. Estimation of the crack propagation direction in a mixed-mode geometry via multi-parameter fracture criteria. Frattura ed Integrita Strutturale, 2015, vol. 9, no. 33, p. 25-32. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    VESELÝ, V.; FRANTÍK, P.; SOBEK, J.; MALÍKOVÁ, L.; SEITL, S. Multi-parameter crack tip stress state description for evaluation of nonlinear zone width in silicate composite specimens in component splitting/bending test geometry. Fatigue & Fracture of Engineering Materials & Structures, 2015, vol. 38, no. 1, p. 200-214. ISSN: 8756-758X.
    Detail

    MALÍKOVÁ, L.; VESELÝ, V. The influence of higher order terms of Williams series on a more accurate description of stress fields around the crack tip. Fatigue & Fracture of Engineering Materials & Structures, 2015, vol. 2015, no. 38, p. 91-103. ISSN: 8756-758X.
    Detail

    MAJER, Z.; NÁHLÍK, L.; MALÍKOVÁ, L. Particulate Composite Damage: The Influence of Particle Shape on Crack Path. Key Engineering Materials (print), 2015, vol. 662, no. 1, p. 77-80. ISSN: 1013-9826.
    Detail | WWW

    MALÍKOVÁ, L. Estimation of the plastic zone size from the multi-parameter/ generalized form of fracture criteria on various mode I geometries. In 11th International Conference on Local Mechanical Properties, LMP 2014. Key Engineering Materials (web). 2015. p. 169-172. ISSN: 1662- 9795.
    Detail

  • 2014

    ŠESTÁKOVÁ, L. Using the multi-parameter fracture mechanics for more accurate description of stress/ displacement crack tip fields. In Key Engineering Materials. Key Engineering Materials (web). Switzerland: 2014. p. 1-4. ISBN: 978-3-03785-876- 9. ISSN: 1662- 9795.
    Detail

    MALÍKOVÁ, L. Detailed crack-tip stress field description in a specimen subjected to mixed-mode loading. In Advances in Fracture and Damage Mechanics XII. Key Engineering Materials (web). Switzerland: 2014. p. 317-320. ISSN: 1662-9795.
    Detail

    VESELÝ, V.; SOBEK, J.; FRANTÍK, P.; ŠTAFA, M.; MALÍKOVÁ, L.; SEITL, S. Estimation of the zone of failure extent in quasi-brittle specimens with different crack-tip constraint conditions from stress field. In 7th International Conference Materials Structure & Micromechanics of Fracture (MSMF-7). Key Engineering Materials (print). 2014. p. 262-265. ISBN: 978-80-214-4739-4. ISSN: 1013-9826.
    Detail

    MALÍKOVÁ, L.; VESELÝ, V. Application of multi-parameter fracture mechanics to study of crack propagation angle in selected mixed-mode geometry. In Key Engineering Materials. Key Engineering Materials (print). 2014. p. 209-2012. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
    Detail

    MALÍKOVÁ, L. Plastic zone extent in a CCT specimen determined from the crack-tip stress field approximated by means of the Williams expansion. In Engineering Mechanics 2014. Svratka, Česká republika: 2014. p. 1-4. ISBN: 978-80-214-4871-1.
    Detail

  • 2013

    MALÍKOVÁ, L.; VESELÝ, V.; SOBEK, J.; FRANTÍK, P. Accuracy of approximation of stress field in cracked bodies for failure zone extent estimation. In Fracture Mechanics of Concrete and Concrete Structures. Toledo, Španělsko: 2013. p. 1-10. ISBN: 978-84-941004-0- 6.
    Detail

    MALÍKOVÁ, L.; VESELÝ, V. Application of multi-parameter fracture mechanics to study of crack propagation angle in selected mixed- mode geometry. Materials Structure & Micromechanics of Fracture. Brno, Česká republika: 2013. p. 185-185. ISBN: 978-80-214-4739- 4.
    Detail

    MALÍKOVÁ, L.; VESELÝ, V. Importance of stress and displacement fields expressed by Williams expansion for fracture analyses in various cracked geometries. Applied Mechanics 2013. Velké Karlovice, Česká republika: 2013. p. 1-2. ISBN: 978-80-248-2978- 4.
    Detail

    VESELÝ, V.; SOBEK, J.; FRANTÍK, P.; ŠTAFA, M.; MALÍKOVÁ, L.; SEITL, S. Estimation of extent of zone of failure in quasi-brittle specimens with different crack- tip constraint conditions from stress field. Materials Structure & Micromechanics of Fracture. Brno, Česká republika: 2013. p. 75-75. ISBN: 978-80-214-4739- 4.
    Detail

    MALÍKOVÁ, L. Crack path investigation using the generalized maximum tangential stress criterion: Antisymmetrical four- point bending specimen. In ICMERA 2013. Applied Mechanics and Materials. Bukurešť, Rumunsko: 2013. p. 108-113. ISSN: 1660- 9336.
    Detail

    VESELÝ, V.; SOBEK, J.; MALÍKOVÁ, L.; FRANTÍK, P.; SEITL, S. Multi- parameter crack tip stress state description for estimation of fracture process zone extent in silicate composite WST specimens. Frattura ed Integrita Strutturale, 2013, vol. 2013, no. 25, p. 69-78. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    MALÍKOVÁ, L.; VESELÝ, V. Williams expansion terms and their importance for accurate stress field description in specimens with a crack. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series, 2013, vol. 2013, no. 2, p. 109-114. ISSN: 1804- 0993.
    Detail

  • 2012

    ŠESTÁKOVÁ, L. Mixed-mode higher-order terms coefficients estimated using the over- deterministic method. In Trhlina, Williamsův rozvoj, koeficienty členů vyšších řádů, konečno-prvková analýza, metoda přeurčitosti. Svratka, Česká republika: 2012. p. 1301-1307. ISBN: 978-80-86246-40- 6.
    Detail

    ŠESTÁKOVÁ, L. How to Enhance Efficiency and Accuracy of the Over-Deterministic Method Used for Determination of the Coefficients of the Higher- Order Terms in Williams Expansion. Key Engineering Materials (web), 2012, vol. 245, no. 1, p. 120-125. ISSN: 1662- 9795.
    Detail

    BERMEJO, R.; CHLUP, Z.; ŠESTÁKOVÁ, L.; ŠEVEČEK, O.; DANZER, R. Layered ceramics with internal compressive stresses to improve strength and toughness. Nürnberg: 2012.
    Detail

    VESELÝ, V.; SOBEK, J.; ŠESTÁKOVÁ, L.; SEITL, S. Accurate description of near-crack-tip fields for the estimation of inelastic zone extent in quasi- brittle materials. Key Engineering Materials (web), 2012, vol. 525- 526, no. 1, p. 529-532. ISSN: 1662- 9795.
    Detail

    BERMEJO, R.; CHLUP, Z.; ŠESTÁKOVÁ, L.; ŠEVEČEK, O.; DANZER, R. Strategies to Optimize the Strength and Fracture Resistance of Ceramic Laminates. In Mechanical Properties and Performance of Engineering Ceramics and Composites VII. kniha. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. p. 163-174. ISBN: 9781118205884.
    Detail

    SOBEK, J.; VESELÝ, V.; ŠESTÁKOVÁ, L. Přesnost aproximace polí napětí a posunů v tělese s trhlinou pro odhad rozsahu zóny porušení. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2012, vol. XII, no. 2, p. 361-370. ISSN: 1213- 1962.
    Detail

    NÁHLÍK, L.; HUTAŘ, P.; ŠEVČÍK, M.; MALÍKOVÁ, L. Determination of crack propagation direction using approach based on generalized linear elastic fracture. In The 4th International Conference on Crack Paths (CP2012). 2012. p. 1065-1072. ISBN: 9788895940441.
    Detail

  • 2011

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Generalized linear elastic fracture mechanics: an application to a crack touching the bimaterial interface. Key Engineering Materials, 2011, vol. 452- 453, no. XXX, p. 445-448. ISSN: 1013- 9826.
    Detail

    VESELÝ, V.; ŠESTÁKOVÁ, L.; SEITL, S. Influence of boundary conditions on higher order terms of near-crack- tip stress field in a WST specimen. Key Engineering Materials, 2011, vol. 2012, no. 488- 489, p. 399-402. ISSN: 1013- 9826.
    Detail

    BERMEJO, R.; ŠESTÁKOVÁ, L.; GRUNBICHLER, H.; LUBE, T.; SUPANCIC, P.; DANZER, R. Fracture mechanisms of structural and functional multilayer ceramic structures. Key Engineering Materials, 2011, vol. 465, no. 1, p. 41-46. ISSN: 1013- 9826.
    Detail

    SOBEK, J.; VESELÝ, V.; SEITL, S.; ŠESTÁKOVÁ, L. Study on determination of accurate approximation of near-crack- tip stress and displacement fields in cracked bodies. In Book of extended abstracts of conference Computational Mechanics 2011. Plzeň: 2011. p. 1-2. ISBN: 978-80-261-0027- 0.
    Detail

  • 2010

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; BERMEJO, R. Prediction of crack propagation in layered ceramics with strong interfaces. Engineering Fracture Mechanics, 2010, vol. 77, no. 11, p. 2192-2199. ISSN: 0013- 7944.
    Detail

  • 2009

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Crack propagation in the vicinity of the interface in layered materials. Applied andComputational Mechanics, 2009, vol. III., no. 1., p. 195-204. ISSN: 1802-680X.
    Detail | WWW | Full text in the Digital Library

    HUTAŘ, P.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; ŠEVČÍK, M.; KNÉSL, Z.; NEZBEDOVÁ, E. A fracture mechanics assessment of surface cracks existing in protective layers of multilayer composite pipes. COMPOSITE STRUCTURES, 2009, vol. 92, no. 5, p. 1120-1125. ISSN: 0263- 8223.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Crack behaviour in laminar ceramics with strong interfaces. Key Engineering Materials (print), 2009, vol. 417- 418, no. 417- 418, p. 301-304. ISSN: 1013- 9826.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of apparent fracture toughness of ceramic laminates. COMPUTATIONAL MATERIALS SCIENCE, 2009, vol. 46, no. 3, p. 614-620. ISSN: 0927- 0256.
    Detail

    HUTAŘ, P.; MAJER, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; KNÉSL, Z. THE INFLUENCE OF PARTICLE SIZE ON THE FRACTURE TOUGHNESS OF PP- BASED PARTICLE COMPOSITE. MECHANICS OF COMPOSITE MATERIALS, 2009, vol. 45, no. 3, p. 281-286. ISSN: 0191- 5665.
    Detail

    HUTAŘ, P.; ŠESTÁKOVÁ, L.; KNÉSL, Z.; NEZBEDOVÁ, E.; NÁHLÍK, L. Special fracture mechanics specimens for multilayer plastic pipes testing. POLYMER TESTING, 2009, vol. 28, no. 8, p. 785-792. ISSN: 0142- 9418.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Crack propagation in the vicinity of the interface between two elastic materials. In Damage and Fracture Mechanics. Failure Analysis of Engineering Materials and Structures. Dordrecht, Nizozemí: Springer, 2009. p. 255-264. ISBN: 978-90-481-2668- 2.
    Detail

  • 2008

    ŠESTÁKOVÁ, L. Crack propagation in the vicinity of bi-material interface: Application to multi-layer pipes. In Víceúrovňový design pokrokových materiálů, sborník doktorské konference 2008. Brno: Ústav fyziky materiálů AV ČR, v. v. i., 2008. p. 15-20. ISBN: 978-80-254-3492-5.
    Detail

    MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Numerical analysis of a crack approaching the interface of two dissimilar materials. Properties, Procesing, Modification, Application of Polymeric Materials. Halle/Saale, Germany: 2008. p. PI- 68 ( p.)ISBN: 978-3-940744-17- 3.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Estimation of the critical stress for failure of layered composite materials. IWCMM18. Beijing, China: Beijing Institute of Technology, 2008. p. 103-103.
    Detail

    HUTAŘ, P.; MAJER, Z.; KNÉSL, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; PROD'HOMME, G. Computational estimation of micro- crack behaviour in polypropylene copolymer. Barcelona, Spain (Venice, Italy): 2008. p. 1-2.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Numerical investigation of stress singularities in cracked bimaterial body. Key Engineering Materials, 2008, vol. 385- 387, no. 385- 387, p. 125-128. ISSN: 1013- 9826.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Crack propagation in the vicinity of interface between two elastic materials. 5th International Conference on Fracture of Polymers, Composites and Adhesives. Les Diablerets, Switzerland: 2008. p. P031 ( p.)
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of apparent fracture toughness of ceramic laminates based on generalized strain energy density factor. In 17th European Conference on Fracture. Brno: VUTIUM Brno, 2008. p. 1522-1529. ISBN: 9781617823190.
    Detail

    HUTAŘ, P.; MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; KNÉSL, Z. The influence of particle size on the fracture toughness of a PP- based particle composite. Riga, Latvia: Institute of Polymer Mechanics, University of Latvia, 2008. p. 112-112.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of the crack propagation direction of a crack touching the interface between two elastic materials. Materials Science Forum, 2008, vol. 567- 568, no. 567- 568, p. 225-228. ISSN: 0255- 5476.
    Detail

    ŠESTÁKOVÁ, L.; HUTAŘ, P.; FIEDLER, L.; NÁHLÍK, L. K-kalibrace nehomogenních zkušebních těles typu C. In 10th International Scientific Conference - Applied Mechanics 2008 (full texts of paper and extended abstracts). Gliwice, Poland: Wydawnictwo Katedry Mechaniki Stosowanej, 2008. p. 24-31. ISBN: 978-83-60102-49-7.
    Detail

  • 2007

    ŠESTÁKOVÁ, L.; MAJER, Z. Numerická analýza nehomogenních vzorků používaných pro měření lomově mechanických parametrů polyethylenu. In Křehký lom 2007. Brno: Ústav fyziky materiálů AV ČR, v. v. i., 2007. p. 145-156. ISBN: 978-80-254-0725- 7.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of the crack propagation direction of a crack touching the interface between two elastic materials. Abstract Booklet MSMF- 5. Brno: VUTIUM Brno, 2007. p. 74-74. ISBN: 978-80-214-3434- 9.
    Detail

    HUTAŘ, P.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; KNÉSL, Z. Quantification of the influence of vertex singularities on crack behaviour. IWCMM17- Paris Book of Abstracts. Paris, France: Centre des Matériaux, 2007. p. 139-139. ISBN: -.
    Detail

    ŠESTÁKOVÁ, L. Lomově mechanické parametry bi- materiálového tělesa. In Víceúrovňový design pokrokových materiálů, sborník doktorské konference 2007. Brno: Ústav fyziky materiálů AV ČR, v. v. i., 2007. p. 45-52. ISBN: 978-80-254-0793- 6.
    Detail

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Vliv rozhraní vrstevnatého kompozitu na směr šíření trhliny. In 9th International Scientific Conference Applied Mechanics 2007, Book of Extended Abstracts. Ostrava: VŠB - Technická univerzita Ostrava, 2007. p. 205-206. ISBN: 978-80-248-1389- 9.
    Detail

    ŠESTÁKOVÁ, L.; MAJER, Z.; FIEDLER, L.; KNÉSL, Z. K- Calibration of Specimens used for Lifetime Estimation of Multilayer Pipes. In CD: 11.Problemseminar "Deformation und Bruchverhalten von Kunstoffen". Merseburg: 2007. p. poster 33 ( p.)
    Detail

    NEZBEDOVÁ, E.; KNÉSL, Z.; ŠESTÁKOVÁ, L.; VLACH, B. Fracture Mechanics Analysis of Multi- Layer Pipes. In Fibre Reinforced Composites Conference 2007. Port Elizabeth, South Africa: CSIR, 2007. p. 61-73. ISBN: 978-0-620-37679- 2.
    Detail

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Fracture mechanics parameters of multilayer pipes. Applied andComputational Mechanics, 2007, vol. 1, no. 1, p. 299-306. ISSN: 1802-680X.
    Detail | WWW | Full text in the Digital Library

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Delaminace ochranné vrstvy způsobená povrchovou trhlinou. In SEMDOK 2007. Žilina - Súlov: EDIS, 2007. p. 105-108. ISBN: 978-80-8070-639- 5.
    Detail

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Influence of Bi- material Interface on Crack Propagation Direction in Multilayer Composite. In Engineering mechanics 2007. Svratka, CR: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i., Prague, 2007. p. 269-270. ISBN: 978-80-87012-06- 2.
    Detail

  • 2006

    ŠESTÁKOVÁ, L., MAJER, Z., NÁHLÍK, L., KNÉSL, Z. Numerical Analysis of a Surface Crack in Protective Layers. In Engineering mechanics 2006. Svratka, CR: Institute of Theoretical and Applied Mechanics Academy of Sciences of the Czech Republic, Prague, 2006. p. 348-349. ISBN: 80-86246-27- 2.
    Detail

    ŠESTÁKOVÁ, L. Vliv povrchových trhlin na delaminaci ochranné vrstvy a podkladu. In Problémy lomové mechaniky VI. Brno: CIDEAS, 2006. p. 69-76. ISBN: 80-214-3131- 8.
    Detail

*) Publications are generated once a 24 hours.