Publications

• 2024

  ŠANDERA, P.; ŽÁK, S.; HORNÍKOVÁ, J.; POKLUDA, J. Formulas for the critical length of mode II and III cracks emanating from circumferential U–notches. Engineering Fracture Mechanics, 2024, vol. 298, no. 1, p. 109955-1 (109955-15 p.)ISSN: 0013-7944.
  Detail | WWW

• 2023

  KIANICOVÁ, M.; DLOUHÝ, I.; ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J. Dynamic Fracture Characteristics of High-Strength Steel. Defect and Diffusion Forum, 2023, vol. 422, no. 1, p. 45-49. ISSN: 1012-0386.
  Detail | WWW

• 2021

  SHAYANFARD, P.; HELLER, L.; ŠANDERA, P.; ŠITTNER, P. Experimental and Numerical Investigation of Thermomechanical Cycling of Notched NiTi Shape Memory Ribbon Using SMA Model Accounting for Plastic Deformation. Journal of Materials Research and Technology, 2021, vol. 15, no. 1, p. 1759-1776. ISSN: 2238-7854.
  Detail | WWW | Full text in the Digital Library

  SHAYANFARD, P.; ALARCON, E.; BARATI, M.; MAHTABI, M.; KADKHODAEI, M.; CHIRANI, S.A; ŠANDERA, P. Stress raisers and fracture in shape memory alloys: review and ongoing challenges. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES, 2021, no. 1, p. 1896475-1896475. ISSN: 1040-8436.
  Detail | WWW

  SHAYANFARD, P.; HELLER, L.; ŠANDERA, P.; ŠITTNER, P. Numerical analysis of NiTi actuators with stress risers: The role of bias load and actuation temperature. ENGINEERING FRACTURE MECHANICS, 2021, vol. 244, no. 1, p. 107551-1 (107551-11 p.)ISSN: 1873-7315.
  Detail | WWW

  POKLUDA, J.; DLOUHÝ, I.; KIANICOVÁ, M.; ČUPERA, J.; HORNÍKOVÁ, J.; ŠANDERA, P. Temperature Dependence of Fracture Characteristics ofVariously Heat-Treated Grades of Ultra-High-Strength Steel:Experimental and Modelling. Materials, 2021, vol. 14, no. 19, p. 1-28. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

• 2020

  KIANICOVÁ, M.; ŠANDERA, P.; HORNÍKOVÁ, J.; KOTTFER, D.; POKLUDA, J. The Effect of Prior Surface Roughness on Fatigue Life of Nitrided Specimens. In Metallography XVII. Defect and Diffusion Forum. Švýcarsko: TransTech Publication, 2020. p. 271-276. ISBN: 978-3-0357-1612-2. ISSN: 1662-9507.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P. Influence of Nonlinear Transformation of Data on Verification Lefort’s Formula for the Critical Crack Length. International Journal of Advances in Mechanical and Civil Engineering, 2020, vol. 7, no. 2, p. 6-11. ISSN: 2394-2827.
  Detail | WWW

  SHAYANFARD, P.; ŠITTNER, P.; HELLER, L.; ŠANDERA, P. Finite element analysis on the effect of martensitic transformation and plastic deformation on the stress concentration factor in a thin notched superelastic NiTi ribbon. FUNCT MATER LETT, 2020, vol. 13, no. 5, p. 2051028-2051028. ISSN: 1793-6047.
  Detail | WWW

  ŠANDERA, P.; HORNÍKOVÁ, J.; KIANICOVÁ, M.; DLOUHÝ, I.; POKLUDA, J. Determination of Ramberg-Osgood approximation for estimation of low- temperature fracture toughness. In Fracture and Damage Mechanics. AIP Conference Proceedings. AIP Publishing LLC., 2020. p. 020024-1 (020024-6 p.)ISBN: 978-0-7354-4045-6. ISSN: 1551-7616.
  Detail

• 2019

  SHAYANFARD, P.; HELLER, L.; ŠANDERA, P.; ŠITTNER, P. Thermomechanically Transforming Notched NiTi Thin Ribbon: Effect of Martensitic Transformation on Stress Gradients. In Procedia Structural Integrity. Procedia Structural Integrity. Elsevier, 2019. p. 620-625. ISSN: 2452-3216.
  Detail | WWW

  HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Study on Generalization of Lefort’s Approach toCriticalCrackLength. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). Trans Tech Publications Ltd, 2019. p. 153-158. ISBN: 9783035715866. ISSN: 1013-9826.
  Detail | WWW

  ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P.; VOJTEK, T.; KIANICOVÁ, M.; POKLUDA, J. Local and equivalent stress intensity factors for tortuous cracks under remote mode II loading. Theoretical and Applied Fracture Mechanics, 2019, vol. 101, no. 1, p. 35-45. ISSN: 0167-8442.
  Detail | WWW

  OHNIŠŤOVÁ, P.; PÍŠKA, M.; PETRENEC, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P. Fatigue Life of 7475-T7351 Aluminum After Local Severe Plastic Deformation Caused by Machining. Materials, 2019, vol. 12, no. 21, p. 1-23. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  HORNÍKOVÁ, J.; ŠANDERA, P. Influence of Nonlinear Transformation of Data on Verification Lefort’S Formula for the Critical Crack Length. In Proceedings of ISER International Conference. Khandagiri, India: Institute for Technology and Research, 2019. p. 12-17. ISBN: 978-93-89732-10-8.
  Detail

  OHNIŠŤOVÁ, P.; PÍŠKA, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; PETRENEC, M. A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading. In Materials Structure & Micromechanics of Fracture (MSMF9). 1. Brno: Vutium, 2019. p. 124-124. ISBN: 978-80-214-5760-7.
  Detail

  OHNIŠŤOVÁ, P.; PÍŠKA, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; PETRENEC, M. A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading. In Procedia Structural Integrity. Procedia Structural Integrity. Elsevier, 2019. p. 469-474. ISSN: 2452-3216.
  Detail | WWW

• 2018

  KIANICOVÁ, M.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P. The Original Method for Assessment of Residual Stresses in Reinforced Surface Layers. In 26th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger, 2018. p. 1315-1320. ISBN: 978-80-87294-79-6.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Stress Intensity Factors for Cracks Emanating from a Notch under Shear-Mode Loading. In Key Engineering Materials: Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (print). Trans Tech Publications, 2018. p. 48-53. ISBN: 9783035713503. ISSN: 1013-9826.
  Detail

  POKLUDA, J.; HORNÍKOVÁ, J.; PÍŠKA, M.; ŠANDERA, P. Fatigue Behaviour of Powder Steel Specimens Made by Selective Laser Melting. In 26th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger, 2018. p. 979-984. ISBN: 978-80-87294-79-6.
  Detail

• 2017

  SHAYANFARD, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; PETRUŠKA, J.; ŠITTNER, P.; POKLUDA, J. NiTi Self-expanding Vascular Stent Configuration and Biomedical Interaction with Artery: Finite Element Analysis. In Solid State Phenomena. Solid State Phenomena. Švýcarsko: Trans Tech Publications, Switzerland, 2017. p. 366-369. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
  Detail

  LEJČEK, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; ŘEHÁK, P.; POKLUDA, J. Grain Boundary Segregation of Elements of Groups 14 and 15 and its Consequences for Intergranular Cohesion of Ferritic Iron. Journal of Materials Science, 2017, vol. 52, no. 1, p. 5822-5834. ISSN: 1573-4803.
  Detail

  SHAYANFARD, P.; HELLER, L.; DOSTÁLOVÁ, D.; ŠANDERA, P.; ŠITTNER, P.; HORNÍKOVÁ, J.; ALARCON, E.; FROST, M.; SEDLÁK, P.; POKLUDA, J. Effect of Martensitic Transformation on Local Stresses and Strains at a Notch of Cyclically Loaded Superelastic NiTi Ribbon. Rhodes, Greece: ICF, 2017.
  Detail

  ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P.; VOJTEK, T.; POKLUDA, J. Determination of local stress intensity factors at microstructurally tortuous crack fronts under remote mode II loading. In Procedia Structural Integrity. Procedia Structural Integrity. Elsevier, 2017. p. 254-261. ISSN: 2452-3216.
  Detail

  TRUBAČOVÁ, P.; PÍŠKA, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Analysis of Selective Laser Melting Process Parameters Effect on Mechanical and Material Properties for Stainless Steel 316L. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 579-582. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
  Detail

  ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P. Stress intensity factors for rough cracks loaded in mode II. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Trans Tech Publications, 2017. p. 310-313. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
  Detail

  ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P. Shear Mode Stress Intensity Factors for Serrated Crack Fronts. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). 1. Switzerland: Trans Tech Publications, 2017. p. 214-217. ISBN: 9783035711684. ISSN: 1662-9795.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P. Modelling of Tortuous Crack Fronts in Shear Loading Mode. Proceedings of 5th International Conference on Mechanical Engineering, Materials Science and Civil Engineering. Kuala Lumpur: X-Academy, 2017. p. 14-15.
  Detail

• 2016

  HORNÍKOVÁ, J.; ŽÁK, S.; ŠANDERA, P. Numerical Fracture Analysis of Compact Tension Shear (CTS) Specimens with Tortuous Crack Fronts. In Advances in Fracture and Damage Mechanics. Key Engineering Materials (print). Key Engineering MAterials. Trans Tech Publications, 2016. p. 77-80. ISBN: 978-3-03835-541-0. ISSN: 1013-9826.
  Detail

  ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P. Stress Intensity Factors for Rough Cracks Loaded in Mode II. Materials Structure & Micromechanics of Fracture 8. 1. Brno: VUTIUM, 2016. p. 218-218. ISBN: 978-80-214-5357-9.
  Detail

  SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. A fractographic study of bending/torsion fatigue failure in metallic materials with protective surface layers. Advances in Materials Science and Engineering, 2016, vol. 2016, no. 1, p. 1-6. ISSN: 1687-8434.
  Detail | WWW | Full text in the Digital Library

  LEJČEK, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J.; GODEC, M. On the Segregation Behavior of Tin and Antimony at Grain Boundaries of Polycrystalline bcc Iron. Applied Surface Science, 2016, vol. 363, no. 1, p. 140-144. ISSN: 0169-4332.
  Detail

  TRUBAČOVÁ, P.; PÍŠKA, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Analysis of Selective Laser Melting Process Parameters Effect on Mechanical and Material Properties for Stainless Steel 316L. Solid State Phenomena, 2016, vol. 258, no. 1, p. 579-582. ISSN: 1662-9779.
  Detail | WWW

  HORNÍKOVÁ, J.; ŠANDERA, P. Study of Fracture Behaviour of Doped Polycrystalline Fe Alloy. Abstract proceeding book - ECBA. Seminyak: Academic Fora, 2016. p. 13-13. ISBN: 978-969-683- 2.
  Detail

  PÍŠKA, M.; TRUBAČOVÁ, P.; HORNÍKOVÁ, J.; ŠANDERA, P.; BOIVIE, K. A Study of Selective Laser Melting Technology on the Ultra-High Strength Tool Steel Use—Quality, Mechanical Properties and Fatigue. In Applied Mechanics, Behavior of Materials, and Engineering Systems. Switzerland: Springer International Publishing, 2016. p. 67-86. ISBN: 978-3-319-41467-6.
  Detail | WWW

• 2015

  SLÁMEČKA, K.; ŠESTÁK, P.; VOJTEK, T.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Biaxial Fatigue Fractures of Case-Hardened and High-Temperature-Coatings- Protected Specimens. Powder Metallurgy Progress, 2015, vol. 15, no. special, p. 145-149. ISSN: 1335-8987.
  Detail | WWW

  VOJTEK, T.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; HOHENWARTER, A.; PIPPAN, R. Analysis of fatigue crack propagation under mixed mode II + III in ARMCO iron. INTERNATIONAL JOURNAL OF FATIGUE, 2015, vol. 76, no. 1, p. 47-52. ISSN: 0142-1123.
  Detail

  ŽÁK, S.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Verification of Linear Dependence of Plastic Zone Size on J-integral for Mixed- mode Loading. Applied Mechanics and Materials, 2015, vol. 751, no. 1, p. 15-20. ISSN: 1660-9336.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; VOJTEK, T.; POKLUDA, J. Description of Fatigue Crack Propagation under Mixed-mode II+III in Terms of J-integral. Key Engineering Materials (print), 2015, vol. 627, no. 1, p. 145-148. ISSN: 1013-9826.
  Detail

• 2014

  ŠANDERA, P.; POKLUDA, J.; SCHÖBERL, T.; HORNÍKOVÁ, J.; ČERNÝ, M. Modeling Load-displacement Curve and Pop- in Effect in Nanoindentation Tests. Procedia Materials Science, 2014, vol. 3, no. 1, p. 1111-1116. ISSN: 2211-8128.
  Detail

  VOJTEK, T.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; SLÁMEČKA, K. Description of Fatigue Crack Growth under Modes II, III and II+III in Terms of J- integral. Procedia Materials Science, 2014, vol. 3, no. 1, p. 835-840. ISSN: 2211-8128.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Specimens for Simultaneous Mode II, III and II+III Fatigue Crack Propagation: Elasto-Plastic Solution of Crack Tip Stress- Strain Field. In 11TH INTERNATIONAL FATIGUE CONGRESS. Advanced Materials Research. 1. Melbourne: Trans Tech Publications, 2014. p. 1585-1590. ISBN: 978-3-03835-008- 8. ISSN: 1022- 6680.
  Detail

• 2013

  HORNÍKOVÁ, J.; ŽÁK, S.; ŠANDERA, P. K-calibration of Special Specimens for Mode II, III and II+ III Crack Growth. Engineering Fracture Mechanics, 2013, vol. 110, no. 1, p. 430-437. ISSN: 0013- 7944.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S. Elasto-Plastic Solution of Stress-Strain Field at the Crack Tip in Special Specimens for Mode II, III and II+ III Fatigue Crack Propagation. Materials Structure & Micromechanics of Fracture (MSMF7). 1. Brno: Vutium, 2013. p. 194-194. ISBN: 978-80-214-4739- 4.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; ŽÁK, S.; POKLUDA, J. Elasto-plastic Solution of Stress-strain Field at the Crack Tip in Special Specimens for Mode II, III and II+ III Fatigue Crack Propagation. Euromat 2013. 1. Sevilla: Barceló Congresos, 2013. p. 617-617.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Modelling Load-displacement Curve and the Onset of Pop-in during Nanoindentation Tests. Nanomaterials 2013. 1. Cancun: Zing Conferences, 2013. p. 50-50.
  Detail

• 2012

  VOJTEK, T.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; SLÁMEČKA, K.; PIPPAN, R.; HOHENWARTER, A. Near-threshold Fatigue Crack Propagation under Mixed-mode II+ III in ARMCO Iron. In 19th European Conference on Fracture. Kazan: 2012. p. 188-193. ISBN: 978-5-905576-18- 8.
  Detail

  VOJTEK, T.; POKLUDA, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; HOHENWARTER, A.; PIPPAN, R. Equivalent K-factor for Near-threshold Mode II+ III Fatigue Crack Growth in ARMCO Iron. Oxford: 2012.
  Detail

  HORNÍKOVÁ, J.; ŽÁK, S.; ŠANDERA, P. K-calibration of Special Specimen for Mode II, III and II+ III Crack Growth. 8th Meeting of the TC2 on Micromechanisms (ESIS). 1. Oxford: Mansfield College, 2012. p. 35-35.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Comparison of Solutions of Stress Field based on Hertzian and Combined Numerical- Crystallographic Approaches beneath Nanoindenter. In Advances in Fracture and Damage Mechanics X. Key Engineering Materials (print). 1. 2012. p. 395-398. ISBN: 978-3-03785-218- 7. ISSN: 1013- 9826.
  Detail

  LEJČEK, P.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; JENKO, M. Solute Segregation at 46.8deg(111) Twist Grain Boundary of a Phosphorus Doped Fe-2.3% V Alloy. Surface Science, 2012, vol. 606, no. 1, p. 258-262. ISSN: 0039- 6028.
  Detail

• 2011

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Stress Intensity Factors for Surface Semi- elliptical Crack in Cylindrical Specimen under Combined Torsion and Axial Compression. Key Engineering Materials, 2011, vol. 452- 453, no. 1, p. 673-676. ISSN: 1013- 9826.
  Detail

  VOJTEK, T.; HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Near- threshold Fatigue Crack Propagation under Modes II and III in ARMCO Iron. Berlin: 2011.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; PANTĚLEJEV, L.; POKLUDA, J. Geometrical Shielding Produced by Intergranular Crack-tip Branching in Fe-V- P Alloy. Key Engineering Materials, 2011, vol. 465, no. 1, p. 574-577. ISSN: 1013- 9826.
  Detail

• 2010

  ŠANDERA, P.; POKLUDA, J.; HORNÍKOVÁ, J.; VLACH, B.; LEJČEK, P.; JENKO, M. Fracture of Polycrystalline Fe-2.3%V-0.12% P Alloy. Engineering Fracture Mechanics, 2010, vol. 77, no. 1, p. 385-392. ISSN: 0013- 7944.
  Detail

  POKLUDA, J.; ŠANDERA, P. Micromechanisms of Fracture and Fatigue: In a Multiscale Context. 1. 1. London: Springer, 2010. 295 p. ISBN: 978-1-84996-265- 0.
  Detail | WWW

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Linear-Elastic and Elastoplastic Mode II and III Crack Tip Stress- Strain Fields in Cylindrical Specimens with Circumferential Crack. Key Engineering Materials, 2010, vol. 417- 418, no. 1, p. 321-324. ISSN: 1013- 9826.
  Detail

  POKLUDA, J.; SLÁMEČKA, K.; ŠANDERA, P. Mechanism of Factory- Roof Formation. Engineering Fracture Mechanics, 2010, vol. 77, no. 1, p. 1763-1771. ISSN: 0013- 7944.
  Detail

• 2009

  POKLUDA, J.; SLÁMEČKA, K.; ŠANDERA, P. On the Mechanism of Factory- Roof Formation. In Crack Paths. Vicenza, Italy: University of Parma, 2009. p. 155-166. ISBN: 0000000000000.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; LEJČEK, P. Phosphorus-Induced Quasi-Brittle Fracture of Fe-2.3% V-0.12% P Alloy. In Fractography. 1. Košice: IMR SAS, 2009. p. 9-16. ISBN: 978-80-968543-8- 7.
  Detail

• 2008

  POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. Key Engineering Materials, 2008, vol. 385- 387, no. 1, p. 49-52. ISSN: 1013- 9826.
  Detail

  POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; KOZÁK, V.; HORNÍKOVÁ, J.; ŠANDERA, P. Microstructural Interpretation of Effective Fatigue Threshold of Structural Steel. In Multilevel Approach to Fracture of Materials, Components and Structures (ECF17). 1. Brno: Vutium, 2008. p. 2216-2219. ISBN: 9781617823190.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Copper Crystal. Engineering Fracture Mechanics, 2008, vol. 75, no. 12, p. 3755-3762. ISSN: 0013- 7944.
  Detail

  KOTOUL, M.; POKLUDA, J.; ŠANDERA, P.; DLOUHÝ, I.; CHLUP, Z.; BOCCACCINI, A. Toughening effects quantification in glass matrix composite reinforced by alumina platelets. Acta materialia, 2008, vol. 56, no. 12, p. 2908-2918. ISSN: 1359- 6454.
  Detail

  POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J. Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. In Fracture and Damage Mechanics. 1. Seoul: TransTech Publication, 2008. p. 49-52. ISBN: 978-0-87849-369- 2.
  Detail

• 2007

  PILCH, J.; POKLUDA, J.; FLORIAN, Z.; HELLER, L.; ŠANDERA, P.; HORNÍKOVÁ, J. Thermomechanical Properties of Nitinol Wires for Stewart Platform. AT& P journal PLUS, 2007, vol. 2007, no. 1, p. 63-66. ISSN: 1336- 5010.
  Detail

  SLÁMEČKA, K.; POKLUDA, J.; PONÍŽIL, P.; MAJOR, Š.; ŠANDERA, P. On the topography of fracture surfaces in bending- torsion fatigue. Engineering Fracture Mechanics, 2007, vol. 75, no. 1, p. 760-767. ISSN: 0013- 7944.
  Detail

  HORNÍKOVÁ, J.; ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. Onset of Microplasticity in Copper Crystal during Nanoindentation. Key Engineering Materials (print), 2007, vol. 348- 349, no. 1, p. 801-804. ISSN: 1013- 9826.
  Detail

  KOTOUL, M.; POKLUDA, J.; ŠANDERA, P.; DLOUHÝ, I.; CHLUP, Z.; BOCCACCINI, A. Experimental and theoretical investigation of fracture in glass matrix composites reinforced by alumina platelets. In Fracture Mechanics of Concrete and Concrete Structures. Taylor& Francis, 2007. p. 1691-1698. ISBN: 978-0-415-44066- 0.
  Detail

  SLÁMEČKA, K.; POKLUDA, J.; PONÍŽIL, P.; ŠANDERA, P. Reconstruction and Evaluation of 3D Fracture Surface Morphology. In Advances in Computational & Experimental Engineering and Sciences. 2007. p. 1507-1513. ISBN: 0-9717880-3- 0.
  Detail

  HORNÍKOVÁ, J.; BURŠÍKOVÁ, V.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Nickel Crystal. Acta Metallurgica Slovaca, 2007, vol. 13, no. 6, p. 65-69. ISSN: 1335- 1532.
  Detail

  HORNÍKOVÁ, J.; BURŠÍKOVÁ, V.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Nickel Crystal. Brno: Vutium, 2007. p. 24-24.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale Modelling of Nanoindentation Test in Copper Crystal. Brno: Vutium, 2007. p. 45-45.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J. Multiscale modelling of nanoindentation test in Cu crystal. Engineering Fracture Mechanics, 2007, vol. 76, no. 1, p. 0-0. ISSN: 0013- 7944.
  Detail

  POKLUDA, J.; ŠANDERA, P.; OHLÍDAL, M.; ČERNÝ, M.; PILCH, J.; FLORIAN, Z.; SLÁMEČKA, K.; ŠESTÁK, P.; DOLOŽÍLEK, M.; HORNÍKOVÁ, J. Physical Engineering: Research Support of Mechatronic Models. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2007. p. 15-27. ISBN: 978-80-214-3559- 9.
  Detail

  HORNÍKOVÁ, J.; BURŠÍKOVÁ, V.; ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. On the Relation between Pop- Ins in Nanoindentation Tests and the Ideal Shear Strength. Dar es Salaam: University of Dar es Salaam, 2007. p. o- 88 (o-88 p.)
  Detail

• 2006

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Modelling Crack- Tip Shielding Effects in Particle Reinforced Composites. In ECF 16. Alexandroupolis: ESIS, 2006. p. CDROM ( p.)
  Detail

  POKLUDA, J.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; ŠANDERA, P. On the Reconstruction of Crack Paths in Biaxial Fatigue. In Fractography 2006. 1. Stará Lesná: ÚMV SAV, 2006. p. 497-500. ISBN: 80-968543-5- 6.
  Detail

  ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J. On the Correspondence of 2D and 3D Grain Size Statistics in Ultra- fine Grain Materials. S4G. Praha: 2006.
  Detail

  POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Low Fatigue Crack Growth Thresholds in ultra- Fine Grained Metallic Materials. Advances in Nanostructured Materials, Processing - Microstructure - Properties (Nanoved06). 1. Stará Lesná: 2006.
  Detail

  ŠANDERA, P.; POKLUDA, J. Relationships between 2D and 3D Grain Size Statistics. Nanostructured Materials. Indian Institute of Science, 2006. p. 104 ( p.)
  Detail

  POKLUDA, J.; ŠANDERA, P.; OHLÍDAL, M.; DOLOŽÍLEK, M.; RYNDOVÁ, A.; VLACH, B. Physical Engineering: Research Support of Mechatronic Models. In Simulation Modelling of Mechatronic Systems II. mechatronika. Brno: VUT v Brně, 2006. p. 15-30. ISBN: 80-214-3341- 8.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Computation of Effective Fatigue Thresholds Based on a New Concept of Crack Closure. In 5th International Conference on Fracture and Damage Mechanics. 1. Harbin: Trans Tech Publications, 2006. p. 803-806. ISBN: 0-87849-413- 8.
  Detail

  ŠANDERA, P.; PONÍŽIL, P.; POKLUDA, J. Change of 3D Grain Structure of Cu Specimens Prepared by ECAP Caused by Cyclic Deformation. In Nano 06. 1. Brno: Vutium, 2006. p. 194-197. ISBN: 80-214-3331- 0.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Computation of Effective Fatigue Thresholds Based on a New Concept of Crack Closure. Key Engineering Materials (print), 2006, vol. 324- 325, no. 1, p. 324-325. ISSN: 1013- 9826.
  Detail

  POKLUDA, J.; ŠANDERA, P.; PIPPAN, R. Analysis of Crack Closure Level in Terms of Crack- Wake Plasticity. In 9th International Fatigue Congress. Atlanta (USA): Elsevier, 2006. p. 0107a ( p.)
  Detail

  ŠANDERA, P.; PONÍŽIL, P.; POKLUDA, J. Change of 3D Grain Structure of Cu Specimens Prepared by ECAP Caused by Cyclic Deformation. Nano06. 1. VUTIUM, 2006. p. 52 ( p.)ISBN: 80-214-3308- 6.
  Detail

• 2005

  POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Analysis of Roughness-Induced Crack- Tip Shielding in Terms of Size Ratio Effect. Journal of ASTM International, 2005, vol. 2, no. 4, p. 1-15. ISSN: 1546- 962X.
  Detail | WWW

  JANOVEC, J.; JENKO, M.; POKLUDA, J.; VLACH, B.; LEJČEK, P.; SVOBODA, M.; ŠANDERA, P. Effect of Grain Boundary Segregation on Mechanical Properties of P-Doped Fe- Si Base Alloys. Materials Science Forum, 2005, vol. 482, no. 0, p. 191-194. ISSN: 0255- 5476.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. On the Crack Tip Shielding in Particle Reinforced Composites. Materials Science Forum, 2005, vol. 482, no. 0, p. 311-314. ISSN: 0255- 5476.
  Detail

  ŠOB, M.; POKLUDA, J.; ČERNÝ, M.; ŠANDERA, P.; VÍTEK, V. Theoretical Strength of Metals and Intermetallics from First Principles. Materials Science Forum, 2005, vol. 482, no. 0, p. 135 ( p.)ISSN: 0255- 5476.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. Influence of Tempering Temperature on Mechanical Properties of Ultra-High Strength Low- Alloy Steels. In Super- High Strength Steels 05. 1. Rome: AIM & CSM Italy, 2005. p. CD 94_ 1 ( p.)ISBN: 80-214-3085- 0.
  Detail

  POKLUDA, J.; ŠANDERA, P. On the Crack Closure Effect in Metallic Nanomaterials. In Nano 05. 1. Brno: Vutium, 2005. p. 213-218. ISBN: 80-214-3085- 0.
  Detail

  HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; KOTOUL, M. On the Crack Tip Shielding in Particle Reinforced Composites. In 4th International Conference on Fracture and Damage Mechanics. 1. Mallorca, Spain: 2005. p. 509-512. ISBN: 0-9547783-1- 6.
  Detail

  POKLUDA, J.; ŠANDERA, P. Simple Method for Estimation of Fatigue Loading and Useful Life from Fracture Morphology. In International Congres on Fracture (ICF 11). Torino: Centro Congressi Internazionale, 2005. p. 5548_ 1 (5548_4 p.)
  Detail

• 2004

  ČERNÝ, M.; POKLUDA, J.; ŠANDERA, P. Ab initio analysis of theoretical isotropic strength and elasticity of nickel aluminide compounds. Materials Science and Engineering A, 2004, vol. 387- 389C, no. 12, p. 923 ( p.)ISSN: 0921- 5093.
  Detail

  ČERNÝ, M.; ŠOB, M.; POKLUDA, J.; ŠANDERA, P. Ab initio calculations of ideal tensile strength and mechanical stability in copper. Journal of Physics: Condensed Matter, 2004, vol. 16, no. 2, p. 1045 ( p.)ISSN: 0953- 8984.
  Detail

  POKLUDA, J., ČERNÝ, M., ŠANDERA, P., ŠOB, M. Calculations of Theoretical Strength: State of the Art and History. Journal of Computer- Aided Materials Design, 2004, vol. 11, no. 1, p. 1 ( p.)ISSN: 0928- 1045.
  Detail

  POKLUDA, J. ŠANDERA, P. HORNÍKOVÁ, J. Statistical Approach to Roughness- Induced Shielding Effects. Fatigue & Fracture of Engineering Materials & Structures, 2004, vol. 27, no. 2, p. 141 ( p.)ISSN: 8756- 758X.
  Detail

• 2003

  POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J., VLACH, B. Fracture Surfaces in Fe-0.05%C-2.6%Si Alloy Contaminated by Phosphorus. In Fractography 2003. Košice: 2003. p. 358 ( p.)ISBN: 80-968543-2- 1.
  Detail

  ŠANDERA, P.; POKLUDA, J.; HORNÍKOVÁ, J. 3D Statistical Characteristics of Grain Size in Ultra Fine Grained Ceramics. In Nano 03. Brno: 2003. p. 33 ( p.)ISBN: 80-214-2527- X.
  Detail

  ČERNÝ, M.; POKLUDA, J.; ŠOB, M.; FRIÁK, M.; ŠANDERA, P. Ab initio calculations of elastic and magnetic properties of Fe, Co, Ni, and Cr crystals under isotropic deformation. PHYSICAL REVIEW B, 2003, vol. 67, no. 1, p. 035116-1 (035116-8 p.)ISSN: 1098-0121.
  Detail

  POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Analysis of Roughness-Induced Shielding in Terms of Size Ratio Effect. In nd International ASTM/ ESIS Symposium on Fatigue and Fracture Mechanics. Tampa, Florida: 2003. p. 62 ( p.)
  Detail

  POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. 3D Statistical Characteristics of Grain Size in Ultra- Fine Grained Ceramics. In Nano03. Brno: 2003. p. 15 ( p.)ISBN: 80-214-2486- 9.
  Detail

• 2002

  POKLUDA, J.; ŠANDERA, P. Determination of Critical Nanostructure Parameters by Means of Quantitative Metallography and Nanoindentation. Brno: Cerm, 2002. p. 47 ( p.)
  Detail

  POKLUDA, J., ŠANDERA, P. Stanovení kritických parametrů nanostruktury pomocí kvantitativní metalografie a nanoindentace. In Nanovědy, nanotechnologie a nanomateriály v České republice - Nano02. Ostrava: Repronis Ostrava, 2002. p. 142 ( p.)ISBN: 80-7329-027- 8.
  Detail

  ČERNÝ, M.; ŠOB, M.; ŠANDERA, P.; POKLUDA, J. Ab initio Calculations of Theoretical Strength of Copper under Uniaxial Tension. Bulletin of the American Physical Society. 2002. p. 183 ( p.)ISSN: 0003- 0503.
  Detail

  ŠANDERA, P., HORNÍKOVÁ, J., POKLUDA, J. Simple Calculation of Geometrical Shielding at Intergranular Crack Front by Means of Pyramidal Model. In Fracture Mechanics Beyond 2000, ECF 14. Krakow: EMAS, 2002. p. 383 ( p.)ISBN: -88906-04- 6.
  Detail

  ČERNÝ, M., ŠANDERA, P., POKLUDA, J., ŠOB, M. Influence of Magnetism on Results of Ab Initio Calculations of Mechanical Properties of Crystals. In FSI Junior konference 2001. Brno: VUTIUM, 2002. p. 25 ( p.)ISBN: 80-214-2071- 5.
  Detail

  POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J. Application of Statistical Concept of Roughness- Induced Crack Closure to Titanium and Aluminium Alloys. In Fatigue 02. Stockholm: EMAS, 2002. p. 2385 ( p.)ISBN: 1-901537-32- 3.
  Detail

• 2001

  ŠANDERA, P., POKLUDA, J., HORNÍKOVÁ, J. Pyramidal Model of Intergranular Crack Front. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. p. 786 ( p.)ISBN: 80-214-1892- 3.
  Detail

  ŠANDERA, P., HORNÍKOVÁ, J., POKLUDA, J. Aproximální výpočet stínícího efektu na čele interkrystalické trhliny pomocí pyramidálního modelu. In Křehký lom. Brno: ÚFM AV ČR, 2001. p. 69 ( p.)
  Detail

  POKLUDA, J., VLACH, B., ŠANDERA, P., JURÁŠEK, L. Contradiction in Fracture- and Notch Toughness of High Purity Low Alloy Steels. In Cleaner Metal for Industrial Exploitation. Řež: Inst. Nuclear Research, 2001. p. 126 ( p.)ISBN: 92-828-8323- X.
  Detail

  ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. Ab initio Modelling Deformation of Perfect Cubic Crystals under Triaxial Tension. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. p. 140 ( p.)ISBN: 80-214-1892- 3.
  Detail

  HORNÍKOVÁ, J., ŠANDERA, P., POKLUDA, J. Effective Stress Intensity Factor for Crack of Intergranular Morphology. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. p. 737 ( p.)ISBN: 80-214-1892- 3.
  Detail

  ČERNÝ, M.; ŠOB, M.; ŠANDERA, P. Ab initio Calculations of Theoretical Strength and Phase Stability in Copper. In Juniormat 01. Brno: ÚMI FSI VUT, 2001. p. 150 ( p.)ISBN: 80-214-1885- 0.
  Detail

  POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J. Kvantitativní interpretace závislosti rozkmitu prahových hodnot K-faktoru na střední velikosti zrna ARMCO železa. In Degradácia vlastností konštrukčných materiálov únavou. Žilina: ŽU Žilina, 2001. p. 31 ( p.)ISBN: 80-7100-873- 7.
  Detail

  POKLUDA, J., VLACH, B., ŠANDERA, P., JURÁŠEK, L. Antagonism in Fracture and Notch Toughness of UHSLA Steels. In Charpy Centenary Conference 2001. Les Fontelles: SF2M Les Fontelles, 2001. p. 465 ( p.)
  Detail

  ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J.; FRIÁK, M.; ŠOB, M. Ab initio Simulation of Three-Axial Deformation of Perfect Iron Crystal. In Materials Structure & Micromechanics of Fracture (MSMF-3). Brno: Vutium, 2001. p. 146-150. ISBN: 80-214-1892-3.
  Detail

  FUIS, V., JANÍČEK, P., PEŠLOVÁ, F., ŠANDERA, P. Výpočtová simulace deformačně napěťových polí v polykrystalickém materiálu při implozích kavitačních bublin. In Strojné inžinierstvo 2001. Bratislava, Slovensko: Slovenská technická univerzita v Bratislave, 2001. p. 543 ( p.)ISBN: 80-227-1616- 2.
  Detail

• 2000

  POKLUDA, J., SAXL, I., ŠANDERA, P., PONÍŽIL, P., MATOUŠEK, M., PODRÁBSKÝ, T., HORNÍKOVÁ, J. Real- like Polycrystal with Intergranular Crack. In Euromat 2000. Tours (Francie): Elsevier, 2000. p. 449 ( p.)ISBN: 0-08-042815- 0.
  Detail

  BARTÍK, L., POKLUDA, J., ŠANDERA, P. Mechanical Properties and Structure of Low-Alloy Ultra- High Strength Steels. In Euromat 99. Muenchen (SRN): Wiley- VCH, 2000. p. 202 ( p.)ISBN: 3-527-30195- X.
  Detail

  HORNÍKOVÁ, J., ŠANDERA, P., POKLUDA, J. Effective Stress Intensity Factor for the Straight Crack Front with 3D- Ledges. In EUROMAT 99. Muenchen (SRN): Wiley- VCH, 2000. p. 232 ( p.)ISBN: 3-527-30122- 4.
  Detail

  POKLUDA, J., VLACH, B., ŠANDERA, P., JANOVÁ, D., HORNÍKOVÁ, J. Fraktografická podpora interpretace anomálního vztahu lomové a vrubové houževnatosti ultrapevné oceli. In Fractography 2000. Košice: ÚMV SAV, 2000. p. 383 ( p.)ISBN: 80-968468-3- 3.
  Detail

  POKLUDA, J., ŠANDERA, P., HORNÍKOVÁ, J. Statistical Model of Roughness Induced Crack Closure. In Fracture Mechanics: Applications and Challenges, ECF 13. San Sebastian: Elsevier, 2000. p. CD ( p.)
  Detail

  POKLUDA, J., ŠANDERA, P. Evolution of Ideal Strength Calculations. In Metal 2000. Ostrava: Tanger Ostrava, 2000. p. CD ( p.)ISBN: 80-85988-48- 8.
  Detail

• 1999

  HORNÍKOVÁ, J., POKLUDA, J., ŠANDERA, P. Efektivní součinitel intenzity napětí pro dvojnásobně vyhnutou trhlinu ve Voronoiově mozaice. Inženýrská mechanika - Engineering Mechanics, 1999, vol. 6, no. 2, p. 97 ( p.)ISSN: 1210- 2717.
  Detail

  POKLUDA, J., ŠANDERA, P. Three- Dimensional Modelling of Intergranular Fracture. In Physical Metallurgy and Fracture of Materials ' 99. Herľany, Slovenská republika: TU Košice, 1999. p. 63 ( p.)ISBN: 80-7099- 43.
  Detail

  ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J. Ab Initio Calculation of Ideal Strength for Cubic Crystals Under Three- axial Tension. Czechoslovak Journal of Physics, 1999, vol. 49, no. 10, p. 1495 ( p.)ISSN: 0011- 4626.
  Detail

  ČERNÝ, M.; ŠANDERA, P. Ab- initio Calculations of Ideal Strength of Cubic Crystals. In WDS' 99 Proceedings of Contributed Papers. Praha: MATFYZPRESS, 1999. p. 428 ( p.)ISBN: 80-85863-46- 4.
  Detail

• 1998

  ŠANDERA, P., PONÍŽIL, P., POKLUDA, J. Simulation of 3D Intergranular Crack. In Materials Structure & Micromechanics of Fracture (MSMF-2). Brno: Vutium, 1998. p. 15 ( p.)ISBN: 80-214-1181- 3.
  Detail

  ŠANDERA, P., POKLUDA, J., PONÍŽIL, P. Simulation of 3D Intergranular Crack. In 2nd International Colloquium on Materials Structure & Microm. Brno: VUT Brno, 1998. p. 15 ( p.)
  Detail

  ŠANDERA, P., HORNÍKOVÁ, J., POKLUDA, J. Effective Stress Intensity Factor of a Real- Like 3D Intergranular Crack Front. In ECF 12, Fracture from Defects. UK, Sheffield: Elsevier, 1998. p. 811 ( p.)ISBN: 190153703.
  Detail

  HORNÍKOVÁ, J., ŠANDERA, P., POKLUDA, J. Stress Intensity Factor of 3D Branched Crack. In Materials Structure & Micromechanics of Fracture (MSMF-2). Brno: Vutium, 1998. p. 57 ( p.)ISBN: 80-214-1181- 3.
  Detail

  ČERNÝ, M., ŠANDERA, P., POKLUDA, J. Ab Initio Modelling of the Theoretical Strength under Three- axial Tension. In Materials structure and micromechanics of fracture (MSMF-2). Brno: 1998. p. 53 ( p.)
  Detail

• 1997

  HORNÍKOVÁ, J., ŠANDERA, P. Calculation of Effective Value of Stress Intensity Factor of Intergranularly Kinked Crack. In Fractography 97. Košice: Institute of Materials Research SAV, 1997. p. 169 ( p.)ISBN: 80-967814- X.
  Detail

  ŠANDERA, P., POKLUDA, J., PONÍŽIL, P. Three Dimensional Model of Intergranular Crack Development in the Process Zone. In Fractography 97. Košice: Institute of Materials Research SAV, 1997. p. 151 ( p.)ISBN: 80-967814- X.
  Detail

  ŠANDERA, P., POKLUDA, J., WANG, L., ŠOB, M. Calculation of Theoretical Strength of Solids by Linear Muffin-tin Orbitals (LMTO) Method. Materials Science and Engineering A, 1997, vol. A234, no. 1, p. 370 ( p.)ISSN: 0921- 5093.
  Detail

• 1996

  PONÍŽIL, P., POKLUDA, J., ŠANDERA, P. On the Inverse Relation between Fracture Toughness and Prior Grain Size in UHSLA Steeels. In Junior EuroMat 96. Lausanne, Switzerland: Deutsche Gesellschaft für Materialkunde e. V., 1996. p. 308 ( p.)ISBN: 0.
  Detail

  ŠANDERA, P., PONÍŽIL, P., POKLUDA, J. Modelling Intergranular Crack Growth in 2D and 3D Voronoia Cells. In ECF11 Mechanisms and Mechanics of Damage and Failure. London, UK: Engineering Materials Advisory Services Ltd., 1996. p. 491 ( p.)ISBN: 0-947817- 9.
  Detail

  PONÍŽIL, P., POKLUDA, J., ŠANDERA, P. Inverzní vztah mezi lomovou houževnatostí a velikostí zrna UHSLA ocelí. In Junior Euromat 96. Lausanne, Swiss: Deutsche Gesellschaft fur Materialkunde, 1996. p. 308 ( p.)
  Detail

  ŠANDERA, P., POKLUDA, J. Interkrystalické větvení křehké trhliny ve Voronoiových mozaikách. Kovové materiály, 1996, vol. 34, no. 4, p. 230 ( p.)ISSN: 0023- 432X.
  Detail

• 1994

  ŠANDERA, P., POKLUDA, J. Intrinsic Brittleness and Ductility of Cubic Crystals. In International Conference on Fractography. Bratislava: Polygrafia SAV, 1994. p. 234 ( p.)
  Detail

  ŠANDERA, P.; POKLUDA, J. Ideální pevnost kubických krystalů při trojosém tahu. Kovové materiály, 1994, vol. 32, no. 4, p. 282 ( p.)ISSN: 0023- 432X.
  Detail

  ŠANDERA, P., POKLUDA, J. Ideal Strength of Cubic Crystals under Triaxial Tension. 1994, vol. 32, no. 4, p. 282 ( p.)
  Detail

*) Publications are generated once a 24 hours.