doc. Ing.

Radek Vlach

Ph.D.

FME, ISMMB DM – Associate professor

+420 54114 2860
vlach.r@fme.vutbr.cz

Send BUT message

doc. Ing. Radek Vlach, Ph.D.

Publications

  • 2023

    PRUŠA, R.; HUZLÍK, R.; VLACH, R. Complex drive model of linear synchronous motor with variable load. MM Science Journal, 2023, vol. March 2023, no. 1, p. 6398-6406. ISSN: 1803-1269.
    Detail | WWW

  • 2019

    MUSIL, F.; VLACH, R. Coupled Model of Solenoid. In Mechatronics 2019: Recent Advances Towards Industry 4.0. Warsaw, Poland: Springer Verlag, 2019. p. 45-53. ISBN: 978-3-030-29992-7.
    Detail | WWW

    VLACH, R.; MUSIL, F. Coupled Modeling of Permanent Magnet Generator Cooling using CFD. In 2018 18th International Conference on Mechatronics - Mechatronika (ME). 1. 2019. p. 564-569. ISBN: 978-80-214-5543-6.
    Detail

  • 2016

    BÁRTA, J.; ONDRŮŠEK, Č.; LOŠÁK, P.; VLACH, R. Design of High-Speed Induction Machine for the 6 kW, 120 000 rpm Helium Turbo-Circulator. In USB Proceedings 2016 XXII International Conference on Electrical Machines (ICEM). 2016. p. 1552-1558. ISBN: 978-1-5090-2537-4.
    Detail | WWW

    VLACH, R.; HUZLÍK, R. Thermal Model of High Speed Asynchronous Machine. In Mechatronika 2016. 2016. p. 256-260. ISBN: 978-80-01-05882-4.
    Detail | WWW

  • 2014

    ANČÍK, Z.; HADAŠ, Z.; VLACH, R.; JANÁK, L.; SINGULE, V.; PROCHÁZKA, P. Simulation Modelling of MEMS Thermoelectric Generator for Aircraft Applications. In 16th INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE AND EXPOSITION (PEMC 2014). 1. Antalya: Gazi University, Turkey, 2014. p. 265-270. ISBN: 978-1-4799-2060- 0.
    Detail | WWW

    NOVOTNÝ, R.; VLACH, R.; KADLEC, J.; KUCHTA, R. Optimization of ceramics bonding in the area of pressure sensor manufacturing. Microsystem Technologies, 2014, vol. 20, no. 4-5, p. 719-728. ISSN: 0946-7076.
    Detail

    LOŠÁK, P.; VLACH, R. Study of the response of the shaft loaded by Unbalanced Magnetic Pull. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014, 2014. p. 79-84. ISBN: 978-80-214-4817- 9.
    Detail

    VLACH, R. Novel Approach to Thermoelectric Generator Modeling as Energy Harvesting System. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014. p. 725-728. ISBN: 978-80-214-4817- 9.
    Detail

  • 2013

    VLACH, R. Complex Model of Asynchronous Machine as Traction Machine in Mining. In Mechatronics 2013. 2013. p. 323-329. ISBN: 978-3-319-02293- 2.
    Detail

    ANČÍK, Z.; VLACH, R.; JANÁK, L.; KOPEČEK, P.; HADAŠ, Z. Modeling, simulation and experimental testing of the MEMS thermoelectric generators in wide range of operational conditions. In Proceedings of SPIE Smart Sensors, Actuators, and MEMS IV. 8763. Bellingham, Washington, USA: SPIE, 2013. p. 87631M- 1 (87631M-10 p.)ISBN: 9780819495600.
    Detail

    NOVOTNÝ, R.; VLACH, R.; KADLEC, J.; KUCHTA, R. Ceramic joints for pressure sensors development. In Proceedings of the SPIE, Volume 8763, id. 876309. 876309. Grenoble, France: Society of Photo-Optical Instrumentation Engineers (SPIE), 2013. p. 1-9. ISBN: 9780819495600.
    Detail

    VLACH, R. Coupled Thermal- Structural Transient Analysis of Pressure Sensors. In Mechatronics 2013. 2013. p. 495-501. ISBN: 978-3-319-02293- 2.
    Detail

  • 2012

    ANČÍK, Z.; TOMAN, J.; VLACH, R.; HUBÍK, V. Modeling of Thermal Phenomena in Liquid Cooling System for Aircraft Electric Unit. IEEE Transactions on Industrial Electronics, 2012, vol. 2011, no. 99, p. 1 (1 s.). ISSN: 0278- 0046.
    Detail

  • 2011

    CHALUPA, M.; VEVERKA, J.; VLACH, R. DYNAMIC LOADING OF VEHICLE TRACK SIMULATION. In Engineering Mechanics 2011, 17th International conference may 9-12, 2011, Svratka, Czech republic. 2011. Prague: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, 2011. p. 227-230. ISBN: 978-80-87012-33- 8.
    Detail

    VLACH, R. Thermal modelling of powerful traction battery charger. In Mechatronics Recent Technogical and Scientific Advances. 2011. p. 175-187. ISBN: 978-3-642-23243- 5.
    Detail

  • 2010

    VLACH, R. HEATING PREDICTION OF ELECTRIC MACHINE USING NEURAL NETWORK. In MENDEL 2010 - 16th International Conference on Soft Computing. Brno: 2010. p. 298-302. ISBN: 978-80-214-4120- 0.
    Detail

    URBAN, F.; KADLEC, J.; VLACH, R.; KUCHTA, R. Design of pressure sensor based on optical fiber Bragg grating lateral deformation. SENSORS, 2010, vol. 10, no. 12, p. 11212-11225. ISSN: 1424-8220.
    Detail | WWW | Full text in the Digital Library

  • 2009

    SIKORA, M.; VLACH, R. The Dynamic Model of Stirling Engine Crank Mechanism with Connected Electric Generator. Applied andComputational Mechanics, 2009, vol. 3, no. 1, p. 185-194. ISSN: 1802- 680X.
    Detail

  • 2008

    KADLEC, J.; HELÁN, R.; URBAN, F.; VLACH, R.; VRBA, R. Temperature calibrated design of the optical pressure sensor capsule. In Proceedings of the EDS 08 conference. Brno: Ing. Zdeněk Novotný CSc., 2008. p. 1-6. ISBN: 978-80-214-3717- 3.
    Detail

  • 2007

    SIKORA, M.; VLACH, R. Thermal Model of Stirling Engine with Using the Control Volumes Method. In Modelling and optimization of physical systems. Gliwice 2007. Gliwice, Polsko: Wydawnictwo Katedry Mechaniky Stosowanej, 2007. p. 137-142.
    Detail

    VLACH, R. DC MACHINE COOLING BY HEAT PIPE. In LVEM - Low Voltage Electrical Machines 2007. Brno: 2007. p. 108 ( p.)ISBN: 978-80-214-3560- 5.
    Detail

    VLACH, R. Predictor for Control of Stator Winding Water Cooling of Synchronous Machine. In Recent Advances in Mechatronics. Mech. Berlín: Springer, 2007. p. 190-194. ISBN: 978-3-540-73955- 5.
    Detail

    VLACH, R. Thermal model of control non- convectional winding slot cooling by water. In Modeling and optimalization of physical systems. 2007. p. 157-162.
    Detail

    VLACH, R.; GREPL, R.; KREJČÍ, P. Control of Stator Winding Slot Cooling by Water Using Prediction of Heating. In ICM2007 4th IEEE international Conference on Mechatronics. Kumamoto, Japan: IEEE, 2007. p. 5-9. ISBN: 1-4244-1184- X.
    Detail

    SIKORA, M.; VLACH, R. Simulation of Stirling engine working cycle. In Recent Advances in Mechatronics. Mech. Berlin: Springer, 2007. p. 42-46. ISBN: 978-3-540-73955- 5.
    Detail

    GREPL, R.; VLACH, R.; KREJČÍ, P. Modelling of Unilateral Constraints for Virtual Prototyping in SimMechanics. In Int. Conf. on Mechatronics. 1. Kumamoto: KUmamoto universtity, 2007. p. 37-37.
    Detail

    KREJČÍ, P.; VLACH, R.; GREPL, R. Sensor of contact force vector. In ICM2007. Kumamoto. Japan: IEEE, 2007. p. 1-4. ISBN: 1-4244-1184- X.
    Detail

  • 2006

    VLACH, R., GREPL, R., KREJČÍ, P. Ŕízení nekonvenčního cházení statorového vinutí vodou. In Engineering Mechanics 2006. Praha: 2006. p. 424 ( p.)ISBN: 80-86246-27- 2.
    Detail

    SIKORA, M.; VLACH, R. The numerical model of alfa Stirling engine modification. In Simulation modelling of mechatronic system III. Mechatronics. Brno: Brno University of Technology, 2006. p. 219-227. ISBN: 978-80-214-3559- 9.
    Detail

    KREJČÍ, P.; VLACH, R.; GREPL, R. CONTACT SENSOR FOR ROBOTIC APPLICATIONS - VERIFICATION OF FUNCTIONALITY. In Engineering Mechanics 2006. 1. Svratka: Ústav termomechniky AVČR, 2006. p. 182-183. ISBN: 80-86246-27- 2.
    Detail

    GREPL, R., VLACH, R., KREJČÍ, P. An Effective Approach To Design Of Interactive Mechatronic System. In Engineering mechanics 2006. Svratka: ÚT AVČR, 2006. p. 82-83. ISBN: 80-86246-27- 2.
    Detail

    VLACH, R. Strain Analysis of Frame Foots of Elevator Machines of type SVM250. 2006.
    Detail

    VLACH, R.; SIKORA, M. Virtual Model of Stirling Engine. In Simulation Modeling of Mechatronic systems II. mechatronika. 2006. p. 215-222. ISBN: 80-214-3341- 8.
    Detail

    VLACH, R. Control of Stator Winding Slot Cooling by Water. In Simulation Modeling of Mechatronics systems II. mechatronika. 2006. p. 75-83. ISBN: 80-214-3341- 8.
    Detail

  • 2005

    VLACH, R. Parametric Model of Synchrnous Machine Winding Cooling by Heat Pipe. In Engineering Mechanics2005. Praha: 2005. p. 341 ( p.)ISBN: 80-85918-93- 5.
    Detail

    VLACH, R. PARAMETRICKÝ MODEL PŘÍMÉHO CHLAZENÍ VINUTÍ SYNCHRONNÍHO MOTORU VODOU. In Engeneering Mechanics 2005. 2005. p. 341 ( p.)ISBN: 80-214-2940- 4.
    Detail

    VLACH, R. COMPUTATIONAL AND EXPERIMENTAL MODELLING OF NON- CONVECTIONAL WINDING SLOT COOLING. Inženýrská mechanika - Engineering Mechanics, 2005, vol. 2005, no. 12, p. 209 ( p.)ISSN: 1210- 2717.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P.; KAPLAN, Z.; VLACH, R. Virtual Prototypes of External Heat Supply Engines. In Simulation Modelling of Mechatronic Systems I. Mechatronika. Brno: Faculty of Mechanical Engineering, Brno University of Technology, 2005. p. 197-206. ISBN: 80-214-3144- X.
    Detail

  • 2004

    VLACH, R., ONDRŮŠEK, Č. Computational and Experimental Modeling of Synchronous Generator Fan. In Engineering Meachanics 2004. Praha: 2004. p. 315 ( p.)ISBN: 80-85918-88- 9.
    Detail

    VLACH, R. Experimentální ověření vlastností tepelné trubice. In Modelování a měření v termomechnice kontinua. Plzeň: 2004. p. 219 ( p.)ISBN: 80-02-01654- 8.
    Detail

    VLACH, R., ONDRŮŠEK, Č. Comparison of Synchronous Machine Cooling Using Heat Pipe and Water Cooling. Elektronika, 2004, vol. 2004, no. 8- 9, p. 195 ( p.)ISSN: 0033- 2089.
    Detail

    VLACH, R., ONDRŮŠEK, Č., GREPL, R. Computational and Experimental Simulation of Synchronous Generator Ventilation. In Fracture Methodologies and Manufacturing Processes. San Diego: ASME, 2004. p. 139 ( p.)ISBN: 0-7918-4669- 5.
    Detail

    GREPL, R., VLACH, R., ONDRŮŠEK, Č. Complex Dynamic Modelling of Mobile Robot. In Fracture Methodologies and Manufacturing Processes. ASME/ JSME Pressure Vessels and Piping Conference. San Diego, USA: ASME, 2004. p. 145 ( p.)ISBN: 0-7918-4669- 5.
    Detail

    VRBA, R., KADLEC, J., GROSMANOVÁ, Z., BRADÁČ, Z., KUČERA, P., FIEDLER, P., ZEZULKA, F., VLACH, R. Senzor pro snímání diference tlaku. MPO. Brno, Buchlovice: MPO, 2004. p. 0 ( p.)
    Detail

    VLACH, R., ONDRŮŠEK, Č. Cooling of Synchronous Machine Winding Using Heat Pipe. In Engineering Mechanics 2004. Praha: 2004. p. 317 ( p.)ISBN: 80-85918-88- 9.
    Detail

    VLACH, R. Chlazení elektrických strojů. Brno: 2004. 28 p. ISBN: 80-214-2848- 1.
    Detail

  • 2003

    VLACH, R. Výpočtově - experimentální modelování ventilátoru synchronního generátoru. In Vybrané problémy elektrických strojů a pohonů. Brno: 2003. p. 285 ( p.)ISBN: 80-214-2400- 1.
    Detail

    VLACH, R., GREPL, R., CHALUPA, M., ONDRŮŠEK, Č. Výpočtové modelování dynamických vlastností pásového vozidla. In Computational Mechanics 2003. Plzeň: 2003. p. 505 ( p.)ISBN: 80-7082-999- 0.
    Detail

    CHALUPA, M., VLACH, R., KOTEK, V. Choice Parameters Influence at Vehicle Track Behavior. In Engineering mechanics 2003. Brno: 2003. p. 124 ( p.)ISBN: 80-86246-18- 3.
    Detail

    VLACH, R., ONDRŮŠEK, Č. HEATING PREDICTION OF ELECTRIC MACHINE USING NEURAL NETWORK. In International Conference Mechatronics, Robotics and Biomechanics 2003. UMT FSI VUT Brno. Brno: 2003. p. 93 ( p.)ISBN: 80-214-2312- 9.
    Detail

    VLACH, R., ONDRŮŠEK, Č. Control of electric machine Ventilation Using Artificial intelligence. In Engineering mechanics 2003. Brno: 2003. p. 372 ( p.)ISBN: 80-86246-18- 3.
    Detail

    GREPL, R., VLACH, R., KRATOCHVÍL, C. Návrh tepelného modelu stejnosměrného motoru pro řízené momentové přetěžování. In Výpočtová mechanika 2003. Plzeň: 2003. p. 89 ( p.)ISBN: 80-7082-999- 0.
    Detail

    GREPL, R., VLACH, R. Computational Modelling of Thermal Behavior of DC Motor. In EPVE 2003. Brno: 2003. p. 155 ( p.)ISBN: 80-214-2497- 4.
    Detail

  • 2002

    VLACH, R., CHALUPA, M., KOTEK, V. Vliv vypraných parametrů na chování lyže pro jízdu po trávě. In Inženýrská mechanika 2002. Brno: 2002. p. 309 ( p.)ISBN: 80-214-2109- 6.
    Detail

    VLACH, R. Řízení ventilace elektrického stroje s využitím umělé inteligence. Brno: 2002.
    Detail

    VLACH, R., ONDRŮŠEK, Č. Komplexní model synchronního motoru. In Inženýrská mechanika 2002. 2002. p. 307 ( p.)ISBN: 80-214-2109- 6.
    Detail

    VLACH, R. Řízení ventilace elektrického stroje s využitím umělé inteligence. 2002. 26 p.
    Detail

    GREPL, R., VLACH, R., ONDRŮŠEK, Č. Návrh tepelného modelu krokového motoru. In EPVE 2002. Brno, Česká republika: 2002. p. 226 ( p.)ISBN: 80-214-2246- 7.
    Detail

    VLACH, R., ONDRŮŠEK, Č. Komplexní model synchronního motoru. In Inženýrská mechanika 2002. Brno: Institud of mechanics of solids, 2002. p. 307 ( p.)ISBN: 80-214-2109- 6.
    Detail

  • 2001

    VLACH, R. VENTILAČNÍ MĚŘENÍ SYNCHRONNÍHO MOTORU S VLASTNÍM ZDROJEM VENTILACE. In Vybrané problémy elektrických strojů a pohonů 2001. Brno: UVEE FEKT VUT Brno, 2001. p. 1000 ( p.)ISBN: 80-7580-125- 2.
    Detail

    KREJČÍ, P., VLACH, R. Optimization of ventilation network parameters of asynchronous generator by genetic algorithm. Zeszyty Naukowe Politechniki Slaskej - Elektryka, 2001, vol. 177, no. 05, p. 45 ( p.)ISSN: 0072- 4688.
    Detail

    VLACH, R. Analýza chování lyže pro jízdu po trávě. In Inženýrská mechanika 2001. Praha: ČVUT Praha, 2001. p. 285 ( p.)ISBN: 80-85918-64- 1.
    Detail

    VLACH, R. Modelování ventilace synchronního motoru pomocí CFD. In Měření, analýza a identifikace parametrů pro simulační modely asynchronních strojů. Brno: UVEE FEKT VUT Brno, 2001. p. 100 ( p.)ISBN: 80-214-1979- 2.
    Detail

    VLACH, R. 3D ventilační síť synchronního motoru se zdrojem cizí ventilace. In Aplikovaná mecchanika 2001. 2001. p. 1 ( p.)ISBN: 80-217-1887- 1.
    Detail

  • 2000

    VLACH, R. Výpočtové modelování oteplení asynchronního dynamometru. In Aplikovaná elektromechanika 2000. Liberec: 2000. p. 379 ( p.)ISBN: 80-7083-388- 2.
    Detail

    VLACH, R. Controled of cooling of synchronous motor. In Sborník konference Diagnostika a aktivní řízení 2000. Třešť: VUT Brno, 2000. p. 138- 143 ( p.)ISBN: 80-214-1665- 3.
    Detail

*) Publications are generated once a 24 hours.