Publications

• 2024

  MALÍKOVÁ, L.; DOUBEK, P.; KŘIVÝ, V.; SEITL, S. I+II mixed-mode fatigue crack propagation under combination of tensile loading and corrosion in a HSS specimen. In Procedia of Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2024. p. 17-22. ISSN: 2452-3216.
  Detail | WWW

  DOUBEK, P.; KUMPOVÁ, I.; MALÍKOVÁ, L.; AL KHAZALI, M.; SEITL, S. Determination of the geometric parameters of the defects based on the tomographically obtained data and their influence on the fatigue behavior of the S960 with laser cladded protective layers. Frattura ed Integrita Strutturale, 2024, vol. 67, no. 71, p. 67-79. ISSN: 1971-8993.
  Detail | WWW

  CANTELI, A.; CASTILLO, E., DÍAZ-SALAMANCA, D., MUNIZ-CALVENTE, M., SEITL, S. Advances in low cycle fatigue probabilistic modeling. Theoretical and Applied Fracture Mechanics, 2024, vol. 133, no. 8, p. 1-16. ISSN: 0167-8442.
  Detail | WWW

  MALÍKOVÁ, L.; BENEŠOVÁ, A.; AL KHAZALI, M.; SEITL, S. Corrosion vs. fatigue in a high-strength steel specimen investigated via FEM. In Procedia Structural Engineering. Procedia Structural Integrity. online: Elsevier, 2024. p. 68-72. ISSN: 2452-3216.
  Detail | WWW

  MALÍKOVÁ, L.; BENEŠOVÁ, A.; AL KHAZALI, M.; SEITL, S. Fatigue behavior of high strength steels under various levels of corrosion. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2024. p. 376-381. ISSN: 2452-3216.
  Detail | WWW

  SEITL, S.; AL KHAZALI, M.; MALÍKOVÁ, L. Appropriate cumulative fatigue damage models for fatigue life estimation applied to high-strength steels. KOVOVE MATERIALY-METALLIC MATERIALS, 2024, vol. 62, no. 1, p. 41-51. ISSN: 1338-4252.
  Detail | WWW

  DOUBEK, P.; KOZÁKOVÁ, K.; KUNZ, L.; SEITL, S. Fatigue life of S960 high strength steel with laser cladded functional surface layers. ENGINEERING FAILURE ANALYSIS, 2024, vol. 164, no. 8, p. 1-11. ISSN: 1350-6307.
  Detail | WWW

• 2023

  MALÍKOVÁ, L.; DOUBEK, P.; JUHÁSZOVÁ, T.; KREJSA, M.; SEITL, S. Fatigue crack propagation under corrosion of high-strength steel. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2023. p. 264-269. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  KATZER, J.; SEITL, S.; SKORATKO, A. Properties of steel fiber reinforced mortar-plastic columns with the cross-section in a form of a Cesaro fractal. Structural Concrete, 2023, vol. 1, no. 1, p. 1-12. ISSN: 1751-7648.
  Detail | WWW

  MALÍKOVÁ, L.; DOUBEK, P.; MIARKA, P.; SEITL, S. Numerical modelling of stress field near a crack tip influenced by corrosion. In AIP Conference Proceedings. AIP Conference Proceedings. online: Elsevier, 2023. ISSN: 1551-7616.
  Detail

  JUHÁSZOVÁ, T.; MIARKA, P.; SEITL, S.; JINDRA, D.; KALA, Z. Comparison of crack propagation rates in selected structural components made from AISI 304 grades: Three-point bending test. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2023. p. 1090-1097. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  JUHÁSZOVÁ, T.; MIARKA, P.; JINDRA, D.; KALA, Z.; SEITL, S. Evaluation of Fatigue Crack Growth Rates in an IPE Beam Made of AISI 304 under Various Stress Ratios. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2023. p. 172-177. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  KLUSÁK, J.; KOZÁKOVÁ, K.; JAMBOR, M.; SEITL, S. Fatigue behavior of DIN 1.4307 and DIN 1.4306 stainless steels under high frequency loading. In Materials Structure & Micromechanics of Fracture. Procedia Structural Integrity. Elsevier, 2023. p. 142-147. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  JUHÁSZOVÁ, T.; MIARKA, P.; SEITL, S. Comparison of crack growth rates of IPE beams made from stainless steel in three-point bending. In 6th International Conference on Structural Integrity and Durability (ICSID 2022). Procedia Structural Integrity. online: Elsevier, 2023. p. 1-6. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  JUHÁSZOVÁ, T.; MIARKA, P.; SEITL, S. Crack Grow Rate Comparison For Different Crack Front Shapes In Stainless-steel IPE 80 Beam. In Structural and Physical Aspects of Construction Engineering 2022 (SPACE 2022) 5th International Scientific Conference. AIP Conference Proceedings. Online: AIP, 2023. ISSN: 1551-7616.
  Detail

  MIARKA, P.; SEITL, S.; KLUSÁK, J.; MALÍKOVÁ, L.; MERTA, I.; BÍLEK, V. High-cycle fatigue cracks in concrete investigated by μCT tomography. In Procedia Structural Integrity 43. Procedia Structural Integrity. online: Elsevier, 2023. p. 124-129. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; HORNÍK, V.; LESIUK, G.; KUNZ, L. Influence of Micro-structure of selected components made from AISI 304 on the mechanical properties. In 10th International Conference on Materials Structure and Micromechanics of Fracture, MSMF 2023. Procedia Structural Integrity. Elsevier, 2023. p. 113-118. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  DOUBEK, P.; MALÍKOVÁ, L.; MIARKA, P.; SEITL, S. Laser cladded protective layer on the S960 Change of microhardness in the vicinity of the bi-material interface. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2023. p. 101-106. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  MALÍKOVÁ, L.; DOUBEK, P.; JUHÁSZOVÁ, T.; SEITL, S. Stress concetration factor on a corrosion pit. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2023, vol. 23, no. 2, p. 27-30. ISSN: 1804-4824.
  Detail | WWW

  FRANTÍK, P.; KERŠNER, Z.; DOMSKI, J.; GANCARZ, M.; ŠIMONOVÁ, H.; SEITL, S. Exponenciální aproximace hodnot tlakových pevností vlákny vyztužených malt v čase – podklad pro standardizaci výstupů únavových testů. 29. konference betonářské dny (2023) − Sborník ke konferenci. Praha: Česká betonářská společnost ČSSI, 2023. p. 594-599. ISBN: 978-80-908943-0-3.
  Detail

  BENEŠOVÁ, A.; SEITL, S.; ŠIMONOVÁ, H.; ROVNANÍKOVÁ, P.; KERŠNER, Z. Fatigue properties of a selected alkali-activated aluminosilicate composite. Book of full texts Engineering mechanics 2023. Engineering Mechanics .... Praha: Institute of Thermomechanics of the Czech Academy of Sciences, 2023. p. 43-46. ISBN: 978-80-87012-84-0. ISSN: 1805-8256.
  Detail

  KLUSÁK, J.; KOZÁKOVÁ, K.; FINTOVÁ, S.; SEITL, S. Fatigue lifetimes of 1.4306 and 1.4307 stainless steels subjected to ultrasonic loading. Procedia Structural Integrity, 2023, vol. 2022, no. 42, p. 1369-1375. ISSN: 2452-3216.
  Detail | WWW

  MIARKA, P.; MALÍKOVÁ, L.; BÍLEK, V.; BENEŠOVÁ, A.; MERTA, I.; SEITL, S. On the fatigue resistance of high performance concrete. In AIP Conference Proceedings. AIP Conference Proceedings. online: Elsevier, 2023. ISBN: 9780735447615. ISSN: 1551-7616.
  Detail

  MALÍKOVÁ, L.; BENEŠOVÁ, A.; AL KHAZALI, M.; SEITL, S. High-strength steels: Fatigue and corrosion. Book of abstracts of 24th International Scientific Conference Applied Mechanics 2023. Piešťany, Slovenská republika: 2023. p. 73-74. ISBN: 978-80-227-5294-7.
  Detail

  MALÍKOVÁ, L.; BENEŠOVÁ, A.; AL KHAZALI, M.; KŘIVÝ, V.; SEITL, S. Stress concentration on a corrosion pit. Proceedings of extended abstracts of 21st International Conference Modelling in Mechanics 2023. Velké Losiny: 2023. p. 28-28. ISBN: 978-80-248-4674-3.
  Detail

  MALÍKOVÁ, L.; JUHÁSZOVÁ, T.; DOUBEK, P.; KREJSA, M.; SEITL, S. Influence of a corrosion pit on behavior of a nearby crack. In AIP Conference Proceedings. AIP Conference Proceedings. online: Elsevier, 2023. p. 1-7. ISBN: 978-0-7354-4548-2. ISSN: 1551-7616.
  Detail | WWW

• 2022

  MIARKA, P.; SEITL, S.; BÍLEK, V.; CIFUENTES, H. Assessment of fatigue resistance of concrete: S-N curves to the Paris’ law curves. Construction and building materials, 2022, vol. 341, no. 2, p. 1-18. ISSN: 0950-0618.
  Detail | WWW | Full text in the Digital Library

  MALÍKOVÁ, L.; DOUBEK, P.; MIARKA, P.; SEITL, S. Influence of the interphase between laser-cladded metal layer and steel substrate on the fatigue propagation of a short edge crack. Frattura ed Integrita Strutturale, 2022, vol. 16, no. 59, p. 514-524. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; BENEŠOVÁ, A.; PASCUAL, Á.; MALÍKOVÁ, L.; BUJDOŠ, D.; BÍLEK, V. Fatigue and fracture properties of concrete mixtures with various water to cement ratio and maximum size of aggregates. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2022. p. 1512-1519. ISSN: 2452-3216.
  Detail | WWW

  SEITL, S.; POKORNÝ, P.; BENEŠOVÁ, A.; JUHÁSZOVÁ, T.; KALA, Z. Variance of selected properties from various structural elements made from AISI 304. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2022, vol. 22, no. 2, p. 39-44. ISSN: 1213-1962.
  Detail | WWW

  MALÍKOVÁ, L.; DOUBEK, P.; JUHÁSZOVÁ, T.; SEITL, S. Fracture parameters of a perpendicular crack with its tip close to a corrosion pit. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2022, vol. 22, no. 2, p. 30-34. ISSN: 1804-4824.
  Detail | WWW

  MALÍKOVÁ, L.; DOUBEK, P.; JUHÁSZOVÁ, T.; KLUSÁK, J.; SEITL, S. Interaction of a fatigue crack and a corrosion dimple in a high-strength steel specimen. In Procedia of Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2022. p. 1082-1089. ISSN: 2452-3216.
  Detail | WWW

  BLASÓN, S.; WERNER, T.; KRUSE, J.; MADIA, M.; MIARKA, P.; SEITL, S.; BENEDETTI, M. Determination of fatigue crack growth in the near-threshold regime using small-scale specimens. Theoretical and Applied Fracture Mechanics, 2022, vol. 118, no. 103224, p. 1-12. ISSN: 0167-8442.
  Detail | WWW

  DOUBEK, P.; MALÍKOVÁ, L.; SEITL, S. Analysis of the material properties in the vicinity of bi-material interface made by the laser cladded protective layer on the S960. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2022. p. 1529-1536. ISSN: 2452-3216.
  Detail | WWW

• 2021

  JUHÁSZOVÁ, T.; MALÍKOVÁ, L.; DOUBEK, P.; MIARKA, P.; SEITL, S. Fatigue behaviour of a short crack in a thin protective layer laser-cladded on a steel substrate. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2021, vol. 21, no. 2, p. 25-29. ISSN: 1804-4824.
  Detail | WWW

  MALÍKOVÁ, L.; DOUBEK, P.; MIARKA, P.; SEITL, S. Crack behaviour at the interface of a surface layer applied on a steel substrate by laser cladding. In 13th International Scientific Conference on Civil and Environmental Engineering Young Scientist. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2021. p. 1-6. ISSN: 1757-899X.
  Detail | WWW | Full text in the Digital Library

  MIARKA, P.; SEITL, S. Vliv agresivního prostředí na lomovou odolnost v kombinovaném módu I/II namáhání. JUNIORSTAV 2021. Brno: ECON publishing, s.r.o., 2021. p. 391-395. ISBN: 978-80-86433-75-2.
  Detail | WWW

  TRIANA FERNANDEZ, G.; MIARKA, P.; SEITL, S. Influence of Thickness on the Values of Stress Intensity Factor in Compact Tension Specimen. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2021, vol. 21, no. 2, p. 54-59. ISSN: 1804-4824.
  Detail | WWW

  JUHÁSZOVÁ, T.; MIARKA, P.; SEITL, S. ANALYSIS OF STRESS FIELD SHAPE AROUND CRACK TIP OF STAINLESS-STEEL IPE PROFILE. Proceedings of extended abstracts. Ostrava: VŠB-TUO, 2021. p. 8-8. ISBN: 978-80-248-4561-6.
  Detail | WWW

  BRAET, L.; JUHÁSZOVÁ, T.; JINDRA, D.; MIARKA, P.; SEITL, S. Finding the optimal stress state of a stainless-steel IPE profile for fatigue experiments. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2021. p. 1065-1072. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  JINDRA, D.; KALA, Z.; SEITL, S.; KALA, J. MATERIAL MODEL PARAMETER IDENTIFICATION OF STAINLESS STEEL (AISI 304L). In Proceedings of the Engineering Mechanics 2020. Engineering Mechanics .... Svratka, Česká republika: 2021. p. 1-4. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.
  Detail | WWW

  MALÍKOVÁ, L.; MIARKA, P.; DOUBEK, P.; SEITL, S. Influence of the bi-material interface on the crack propagation through a thin protective layer. In Procedia of Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2021. p. 605-612. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  JINDRA, D.; KALA, Z.; KALA, J.; SEITL, S. Experimental and Numerical simulation of a Three Point Bending Test of a Stainless Steel Beam. In Transportation Research Procedia. Transportation Research Procedia. Elsevier, 2021. p. 1114-1121. ISSN: 2352-1457.
  Detail | WWW | Full text in the Digital Library

  Lopez-Crespo, C., Cruces A., Seitl, S., Moreno, B., Lopez-Crespo, P. Estimation of the Plastic Zone in Fatigue via Micro-Indentation. Materials, 2021, vol. 14, no. 19, p. 1-14. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  JUHÁSZOVÁ, T.; MIARKA, P.; SEITL, S. NON-TRADITIONAL GEOMETRY FOR WEDGE-SPLITTING TEST. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2021, vol. 21, no. 1, p. 1-5. ISSN: 1213-1962.
  Detail | WWW | Full text in the Digital Library

  ALVAREZ MORAN, J.; SEITL, S.; MIARKA, P. NUMERICAL STUDY OF UNIVERSAL BEAM (I SECTION) UNDER BENDING LOAD WITH CRACK. In ENGINEERING MECHANICS 2020 BOOK OF FULL TEXTS. Engineering Mechanics .... online: Brno University of Technology Institute of Solid Mechanics, Mechatronics and Biomechanics, 2021. p. 54-57. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.
  Detail | WWW

  SEITL, S.; ANDRADE LIZARRO, J.; MIARKA, P. Mixed Mode I/II Fracture Resistance of Various Civil Engineering Materials by Selected Criteria. In Procedia Structural Integrity. Procedia Structural Integrity. online: Elsevier, 2021. p. 312-319. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

• 2020

  KREJSA, M.; BROŽOVSKÝ, J.; SEITL, S.; KALA, Z.; KREJSA, V.; LEHNER, P. Probabilistic fatigue damage prediction of relative short edge crack using Direct Optimized Probabilistic Calculation. In 4th International Scientific Conference Structural and Physical Aspects of Construction Engineering (SPACE 2019). MATEC Web of Conferences. 2020. p. 1-7. ISSN: 2261-236X.
  Detail

  MIARKA, P.; CRUCES, A.; SEITL, S.; MALÍKOVÁ, L.; LOPÉZ-CRESPO, P. Evaluation of the SIF and T-stress values of the Brazilian disc with a central notch by hybrid method. INTERNATIONAL JOURNAL OF FATIGUE, 2020, vol. 135, no. 1, p. 1-12. ISSN: 0142-1123.
  Detail | WWW

  SEITL, S.; MIARKA, P.; BÍLEK, V. Fatigue and fracture mechanical properties of selected concrete for subtle precast structural elements. In MATEC Web of Conferences. MATEC Web of Conferences. EDP Sciences, 2020. p. 1-8. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; POKORNÝ, P.; MIARKA, P.; KLUSÁK, J.; KALA, Z.; KUNZ, L. Comparison of fatigue crack propagation behaviour in two steel grades S235, S355 and a steel from old crane way. In MATEC Web of Conferences. MATEC Web of Conferences. EDP Sciences, 2020. p. 1-6. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

  MIARKA, P.; ROZSYPALOVÁ, I.; SEITL, S.; VANTYGHEM, G.; DE CORTE, W.; DANĚK, P.; KERŠNER, Z. Pilotní lomově-mechanická charakterizace vybraného jemnozrného cementového kompozitu por aditivní technologii. Sborník příspěvků konference Juniorstav 2020. 2020. p. 457-462. ISBN: 978-80-86433-73-8.
  Detail

  LEHNER, P.; PAŘENICA, P.; KREJSA, M.; KŘIVÝ, V.; BROŽOVSKÝ, J.; SEITL, S.; KALA, Z. The general procedure of numerical analysis related to a fatigue damage on the cyclically loaded construction. In MATEC Web of Conferences. MATEC Web of Conferences. Slovensko: 2020. p. 1-7. ISSN: 2261-236X.
  Detail | WWW

  MIARKA, P.; SEITL, S.; HORŇÁKOVÁ, M.; LEHNER, P.; KONEČNÝ, P.; SUCHARDA, O.; BÍLEK, V. Influence of chlorides on the fracture toughness and fracture resistance under the mixed mode I/II of high-performance concrete. Theoretical and Applied Fracture Mechanics, 2020, vol. 110, no. 102812, p. 1-15. ISSN: 0167-8442.
  Detail | WWW | Full text in the Digital Library

  MIARKA, P.; CRUCES, A.; SEITL, S.; MALÍKOVÁ, L.; LOPÉZ-CRESPO, P. Influence of the constraint effect on the fatigue crack growth rate in S355 J2 steel using digital image correlation. Fatigue and Fracture of Engineering Materials and Structures, 2020, vol. 43, no. 8, p. 1703-1718. ISSN: 1460-2695.
  Detail | WWW

  MIARKA, P.; PAN, L.; BÍLEK, V.; SEITL, S.; CIFUENTES, H. Influence of the chevron notch type on the values of fracture energy evaluated on alkali-activated concrete. Engineering Fracture Mechanics, 2020, vol. 236, no. 1, p. 1-18. ISSN: 0013-7944.
  Detail | WWW

  MIARKA, P.; SEITL, S. INFLUENCE OF THE AGGRESSIVE ENVRIONMENT ON THE FRACTURE RESSISTANCE UNDER THE MIXED MODE I/II LOAD. Sborníku příspěvků. online: Vysoké učení technické vBrně, Fakulta stavební, 2020. p. 391-395. ISBN: 978-80-86433-75-2.
  Detail | WWW

  KREJSA, M.; BROŽOVSKÝ, J.; LEHNER, P.; SEITL, S.; KALA, Z.; KREJSA, V. Probabilistic fatigue analysis of existing steel structure. In 4th International Scientific Conference Structural and Physical Aspects of Construction Engineering (SPACE 2019). MATEC Web of Conferences. Slovensko: 2020. p. 1-8. ISSN: 2261-236X.
  Detail | WWW

  SEITL, S.; MIARKA, P.; ROZSYPALOVÁ, I.; POKORNÁ, K.; KERŠNER, Z.; KATZER, J.; ZARZYCKI, P. Mechanical fracture properties of concrete with lunar aggregate simulant. MATEC Web of Conferences. EDP Sciences, 2020. p. 1-8. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

• 2019

  KREJSA, M.; KOKTAN, J.; JANAS, P.; BROŽOVSKÝ, J.; SEITL, S.; KALA, Z.; KREJSA, V. Parallelization in DOProC method and its using in probabilistic modelling of fatigue problems. In AIP Conference Proceedings. 2019. p. 1-4. ISBN: 978-0-7354-1854-7.
  Detail

  MIARKA, P.; FURGIERI, G.; RŮŽIČKA, V.; SEITL, S.; MERTA, I. A comparison of crack paths growth in brazilian disc with a central notch using various criteria for crack initiation. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2019, vol. 19, no. 2, p. 33-38. ISSN: 1213-1962.
  Detail | WWW

  MIARKA, P.; SEITL, S.; BÍLEK, V. Mixed-mode fracture analysis in High-performance concrete using brazilian disc test. Materiali in tehnologije, 2019, vol. 53, no. 2, p. 233-238. ISSN: 1580-2949.
  Detail | WWW

  SEITL, S.; RŮŽIČKA, V.; MIARKA, P.; SOBEK, J. ANALYSIS OF VARIOUS CHEVRON NOTCH TYPES AND ITS INFLUENCE ON THE LIGAMENT AREA. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2019, vol. 19, no. 1, p. 28-34. ISSN: 1213-1962.
  Detail | WWW

  MIARKA, P.; SEITL, S.; SUCHARDA, O.; BÍLEK, V. Fracture Resistance of Alkali Activated Concrete under the Mixed Mode I/II Load Conditions. In 3rd International Conference on Structural Integrity, ICSI 2019, 2-5 September 2019, Funchal, Madeira, Portugal. Procedia Structural Integrity. online: Elsevier, 2019. p. 610-617. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  MIARKA, P.; PAN, L.; BÍLEK, V.; CIFUENTES, H.; SEITL, S. FRACTURE BEHAVIOUR OF ALKALI ACTIVATED CONCRETE MEASUREDFROM THREE-POINT BENDING TEST WITH CHEVRON NOTCH. France: IA-FraMCoS, 2019. p. 1-8.
  Detail | WWW

  PAN, L.; MIARKA, P.; DANĚK, P.; ŠIMONOVÁ, H.; SEITL, S.; KERŠNER, Z. How estimate concrete compressive strength of cubic specimens via test of various cylindrical specimens. SPACE 2019. Košice: Technická univerzita v Košiciach, 2019. p. 1 (1 s.). ISBN: 978-80-553-3413-4.
  Detail

  MIARKA, P.; JANSSEN, R.; SEITL, S.; DE CORTE, W. A Comparison of the Fracture Behaviour of Various Concrete Grades under Mixed Mode I/II Loading. In Advances in Fracture and Damage Mechanics XVIII. Key Engineering Materials (print). Scientific.net, 2019. p. 228-233. ISBN: 978-3-0357-1586-6. ISSN: 1013-9826.
  Detail | WWW

  SEITL, S.; MIARKA, P.; RŮŽIČKA, V.; MALÍKOVÁ, L.; CRUCES, A.; LOPÉZ-CRESPO, P. Approximation of the crack-tip field in fatigue cracks in bridge steel specimens: DIC analysis of different constraint levels. Frattura ed Integrita Strutturale, 2019, vol. 49, no. 1, p. 97-106. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; MIARKA, P.; POKORNÝ, P.; FINTOVÁ, S.; KUNZ, L. COMPARISON OF MECHANICAL PROPERTIES OF OLD STEEL FROM TRUSS CRANE RUNWAY WITH S235 AND S355 GRADES. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2019, vol. 19, no. 2, p. 54-58. ISSN: 1213-1962.
  Detail | WWW

  MIARKA, P.; MERTA, I.; SEITL, S. NUMERICAL ANALYSIS OF BRAZILIAN DISC TEST WITH A CENTRAL NOTCH: CONSTRAIN LEVEL FOR VARIOUS NOTCH INCLINATION ANGLES. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2019, vol. 19, no. 2, p. 29-32. ISSN: 1213-1962.
  Detail | WWW

  FURGIERI, G.; MIARKA, P.; SEITL, S.; KLUSÁK, J. COMPARISON OF CRACK PATHS BY USING SELECTED CRITERIA IN BRAZILIAN DISC SPECIMEN. In ANALES DE MECÁNICA DE LA FRACTURA. Anales de Mecánica de la Fractura. Sevilla: Grupo Espanol de Fratura, 2019. p. 466-467. ISSN: 0213-3725.
  Detail

  MIARKA, P.; SEITL, S.; DE CORTE, W. Notch Tip Displacements of the Concrete Brazilian Disc Test with Central Notch Analysed by the Concrete Damaged Plasticity Model. Theoretical and Applied Fracture Mechanics, 2019, vol. 102, no. 1, p. 122-150. ISSN: 0167-8442.
  Detail | WWW

  MIARKA, P.; FURGIERI, G.; SEITL, S.; RŮŽIČKA, V.; MERTA, I. A comparison of crack paths in brazilian disc specimen by using various criteria for crack growth. In 17th International Conference Modelling in Mechanics. Ostrava: 2019. p. 1-5. ISBN: 978-80-248-4296-7.
  Detail | WWW

  SEITL, S.; MIARKA, P.; JANOSIK, P. Comparison of selected mechanical properties of old steel and S235 and S355 grades. In 17th International Conference Modelling in Mechanics. 2019. p. 29-29. ISBN: 978-80-248-4296-7.
  Detail | WWW

  FOJTÍK, P.; SEITL, S.; MIARKA, P. Zkouška brazilským diskem: porovnání materiálově nelineárních modelů dostupných ve SCIA engineer. In 17th International Conference Modelling in Mechanics. 2019. p. 1-5. ISBN: 978-80-248-4296-7.
  Detail | WWW

  KALA, Z.; OMISHORE, A.; SEITL, S.; KREJSA, M.; KALA, J. Identification of variation coefficient of equivalent stress range of steel girders with cracks. International Journal of Mechanics, 2019, vol. 13, no. 2019, p. 69-78. ISSN: 1998-4448.
  Detail | WWW

  SEITL, S.; MIARKA, P.; ŠIMONOVÁ, H.; FRANTÍK, P.; KERŠNER, Z.; DOMSKI, J.; KATZER, J. Change of Fatigue and Mechanical Fracture Properties of a Cement Composite due to Partial Replacement of Aggregate by Red Ceramic Waste. Periodica Polytechnica - Civil Engineering, 2019, vol. 1, no. 63, p. 152-159. ISSN: 0553-6626.
  Detail | WWW | Full text in the Digital Library

  RŮŽIČKA, V.; SEITL, S.; MIARKA, P. COMPARISON OF CONSTRAINT LEVEL FOR WST AND BRAZILIAN DISC SPECIMENS LOADED BY MODE I. 17. ročník mezinárodní konference Modelování v mechanice 2019. Ostrava: 2019. p. 28-28. ISBN: 978-80-248-4297-4.
  Detail | WWW

  KALA, Z.; SEITL, S.; KREJSA, M.; OMISHORE, A. Reliability assessment of steel bridges based on experimental research. In AIP Conference Proceedings. AIP conference proceedings. American Institute of Physics Inc., 2019. p. 120005 (120005-4 p.)ISBN: 978-0-7354-1854-7. ISSN: 0094-243X.
  Detail | WWW

• 2018

  SEITL, S.; MIARKA, P.; KLUSÁK, J.; DOMSKI, J.; KATZER, J.; ŠIMONOVÁ, H.; KERŠNER, Z. Change of a Crack Propagation Rate in Fine-Grained Cement-Based Composites due to Partial Replacement of Aggregate by Ceramic Waste. In Non-Traditional Cement and Concrete. Key Engineering Materials (print). Switzerland: Trans Tech Publication Ltd., 2018. p. 111-115. ISBN: 978-3-0357-1096-0. ISSN: 1013-9826.
  Detail

  KUMPOVÁ, I.; VOPÁLENSKÝ, M.; FÍLA, T.; KYTÝŘ, D.; VAVŘÍK, D.; PICHOTKA, M.; JAKŮBEK, J.; KERŠNER, Z.; KLON, J.; SEITL, S.; SOBEK, J. On-the-Fly Fast X-Ray Tomography Using a CdTe Pixelated Detector – Application in Mechanical Testing. IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 2018, vol. 65, no. 12, p. 2870-2876. ISSN: 0018-9499.
  Detail | WWW

  RŮŽIČKA, V.; MIARKA, P.; MALÍKOVÁ, L.; SEITL, S. BRAZILIAN DISC TEST: CALCULATION OF TERMS IN WILLIAMS EXPANSION. In Sborník příspěvků Juniorstav 2018. 2018. p. 613-620. ISBN: 978-80-86433-69-1.
  Detail

  VISZLAY, V.; SEITL, S. MODIFIED COMPACT TENSION TEST FOR CONCRETE SPECIMENS: EVALUATION OF FATIGUE PROPERTIES. In Sborník příspěvků Juniorstav 2018. 2018. p. 642-647. ISBN: 978-80-86433-69-1.
  Detail

  SEITL, S.; RŮŽIČKA, V.; MIARKA, P.; SOBEK, J. PILOT ANALYSIS OF CHEVRON NOTCH LIGAMENT AREA FOR APPLICATION ON QUASI-BRITTLE MATERIALS. In Proceedings of scientific conference Structural Reliability / Modelling in mechanics 2018. Ostrava: VŠB-TU Ostrava, Fakulta stavební, 2018. p. 1-6. ISBN: 978-80-248-4175-5.
  Detail

  SEITL, S.; MIARKA, P.; RŮŽIČKA, V.; MALÍKOVÁ, L.; MERTA, I. DISPLACEMENT FIELD ANALYSIS IN WEDGE SPLITTING TEST SPECIMEN BY ODM METHOD. In Proceedings of scientific conference Structural Reliability / Modelling in mechanics 2018. Ostrava: VŠB-TUO Ostrava, Fakulta stavební, Katedra stavební mechaniky, 2018. p. 1-7. ISBN: 978-80-248-4175-5.
  Detail

  SEITL, S.; MIARKA, P. CALIBRATION FUNCTIONS FOR EDGE CRACKS UNDER SELECTED BENDING LOADS. In Proceedings of scientific conference Structural Reliability / Modelling in mechanics 2018. 2018. p. 1-5. ISBN: 978-80-248-4175-5.
  Detail

  MIARKA, P.; SEITL, S.; BÍLEK, V. Comparison of Fracture Resistance of the Normal and High Strength Concrete Evaluated by Brazilian Disc Test. In Proceedings, Volume 2, ICEM 2018. Proceedings — Open Access Journal. MPDI, 2018. p. 1-6. ISSN: 2504-3900.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; MIARKA, P.; POKORNÝ, P.; FINTOVÁ, S.; KLUSÁK, J. Influence of Micro-Structure on the Fatigue Crack Propagation in Bridge Steel. In Proceedings Volume 2(8), ICEM 2018. Proceedings — Open Access Journal. MDPI, 2018. p. 1-6. ISSN: 2504-3900.
  Detail | WWW | Full text in the Digital Library

  MIARKA, P.; SEITL, S.; DE CORTE, W. Numerical Analysis of the Failure Behavior of a C50/60 Brazilian Disc Test Specimen with a Central Notch. In Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (print). 1. 2018. p. 570-575. ISBN: 978-3-0357-1350-3. ISSN: 1013-9826.
  Detail | WWW

  SEITL, S.; MIARKA, P.; BÍLEK, V. The Mixed-Mode Fracture Resistance of C 50/60 and its Suitability for Use in Precast Elements as Determined by the Brazilian Disc Test and Three-Point Bending Specimens. Theoretical and Applied Fracture Mechanics, 2018, vol. 2018, no. 97, p. 108-119. ISSN: 0167-8442.
  Detail | WWW

  SEITL, S.; MIARKA, P.; KLUSÁK, J.; FINTOVÁ, S.; KUNZ, L. Comparison of the Fatigue Crack Propagation Rates in S355 J0 and S355 J2 Steel Grades. In Local Mechanical Properties XIII. Key Engineering Materials (print). Trans Tech Publications, Switzerland, 2018. p. 91-96. ISBN: 978-3-0357-1242-1. ISSN: 1013-9826.
  Detail | WWW

  SEITL, S.; MIARKA, P.; MERTA, I.; KERŠNER, Z. Numerical Stress Analysis of the Biaxial Tension-Compression Wedge-Splitting Test in Vicinity of the Crack Tip. In Local Mechanical Properties XIII. Key Engineering Materials (print). Trans Tech Publications, Switzerland, 2018. p. 85-90. ISBN: 978-3-0357-1242-1. ISSN: 1013-9826.
  Detail | WWW

  SEITL, S.; MIARKA, P.; BÍLEK, V.; De Corte, W.;. Behaviour of high performance concrete in mixed mode loadings: experiments and numerical simulation. In Research and Modelling in Civil Engineering 2018. MONOGRAPH NO 355. Koszalin, Polsko: Koszalin University of Technology Publishing House, 2018. p. 45-61. ISBN: 978-83-7365-502-7.
  Detail | WWW

  SEITL, S.; MIARKA, P.; KLUSÁK, J.; KALA, Z.; KREJSA, M.; BLASÓN, S.; FERNÁNDEZ-CANTELI, A. Evaluation of fatigue properties of S355 J0 steel using ProFatigue and ProPagation software. In ECF22 - Loading and Environmental effects on Structural Integrity. Procedia Structural Integrity. Elsevier, 2018. p. 1494-1501. ISSN: 2452-3216.
  Detail | WWW

  SEITL, S.; MIARKA, P.; RŮŽIČKA, V.; MALÍKOVÁ, L.; MERTA, I. WEDGE SPLITTING TEST: DISPLACEMENT FIELD ANALYSIS BY MULTI-PARAMETER FRACTURE MECHANICS. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2018, vol. 18, no. 2, p. 50-55. ISSN: 1804-4824.
  Detail

  SEITL, S.; MIARKA, P. INFLUENCE OF CRITICAL DISTANCE IN GMTS CRITERION ON VALUES OF INITIATION CRACK ANGLE IN C 50/60 CONCRETE. In Anales de Mecánica de la Fractura. Anales de Mecánica de la Fractura. Malaga, Španělsko: Grupo Español de Fractura, 2018. p. 445-448. ISSN: 0213-3725.
  Detail

  CASTANÓN JANO, L.; LOZANO GARCÍA, M.; CIFUENTES, H.; SEITL, S.; FERNÁNDEZ-CANTELI, A. ESTABLECIENDO LA EQUIVALENCIA ENTRE ENSAYOS 3-PB Y MDCT PARA DETERMINAR LA ENERGÍA DE FRACTURA EN HORMIGÓN. In Anales de Mecánica de la Fractura. Anales de Mecánica de la Fractura. Malaga, Španělsko: Grupo Español de Fractura, 2018. p. 128-133. ISSN: 0213-3725.
  Detail

  SEITL, S.; MALÍKOVÁ, L.; RŮŽIČKA, V.; MORENO MORALES, M.; LOPÉZ-CRESPO, P. Williams' expansion‐based approximation of the displacement field in an Al 2024 compact tension specimen reconstructed from optical measurements. Fatigue and Fracture of Engineering Materials and Structures, 2018, vol. 41, no. 10, p. 2187-2196. ISSN: 1460-2695.
  Detail | WWW

  KREJSA, M.; BROŽOVSKÝ, J.; LEHNER, P.; SEITL, S.; KALA, Z. Stochastic analysis for short edge cracks under selected loads. In AIP Conference Proceedings. AIP Conference Proceedings. Publisher Logo Conference Proceedings, 2018. p. 1-4. ISBN: 978-0-7354-1690-1. ISSN: 1551-7616.
  Detail | WWW

  MIARKA, P.; SEITL, S.; BÍLEK, V. Fracture Mechanical Parameters of High Strength Concrete Evaluated by Brazilian Disc Test. In PROGRAM AND BOOK OF ABSTRACTS. online: MIT, 2018. p. 95-95. ISBN: 978-961-94088-2-7.
  Detail | WWW

  SEITL, S.; MIARKA, P.; KLUSÁK, J.; BLASÓN, S.; FERNÁNDEZ-CANTELI, A. Comparison of Fatigue Properties of S235 J2 and S355 J2 using ProFatigue software. In PROGRAM AND BOOK OF ABSTRACTS. 2018. p. 115-115. ISBN: 978-961-94088-2-7.
  Detail | WWW

  SEITL, S.; MIARKA, P.; KALA, Z. GEOMETRY FUNCTIONS FOR EDGE CRACKS IN STEEL BRIDGE UNDER THREE- AND FOUR- POINT BENDING WITH VARIOUS SPAN. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2018, vol. 18, no. 2, p. 44-49. ISSN: 1804-4824.
  Detail

  MIARKA, P.; SEITL, S. INFLUENCE OF CRITICAL DISTANCE IN GMTS CRITERION ON VALUES OF INITIATION CRACK ANGLE IN CONCRETE. In Sborník příspěvků Juniorstav 2018. 2018. p. 602-607. ISBN: 978-80-86433-69-1.
  Detail

• 2017

  SEITL, S.; MIARKA, P. QUANTIFICATION OF INFLUENCE OF MATERIAL INTERFACESTEEL- CONCRETE ON CALIBRATION CURVES FOR MODIFIED COMPACT TENSION TEST. In Modelování v mechanice 2017. Ostrava, Česká republika: 2017. p. 1-8. ISBN: 978-80-248-4010- 9.
  Detail

  SEITL, S.; VISZLAY, V. Modified compact tension specimen for experiments on cement based materials: comparison of calibration curves from 2D and 3D numerical solutions. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 39, p. 118-128. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  SOBEK, J.; SEITL, S. Pilotní studie určení hodnoty SIF pro tělesa s V-vrubem. In Modelování v mechanice 2017. Ostrava, Česká republika: 2017. p. 1-5. ISBN: 978-80-248-4010-9.
  Detail

  SEITL, S.; MIARKA, P.; KLUSÁK, J.; DOMSKI, J.; KATZER, J.; ŠIMONOVÁ, H.; KERŠNER, Z. Change of a crack propagation rate in fine-grained cement- based composites due to partial replacement of aggregate by ceramic waste. Proceedings of the International Conference NON-TRADITIONAL CEMENT & CONCRETE VI. Brno: Brno University of Technology, 2017. p. 46-47. ISBN: 978-80-214-5507- 8.
  Detail

  MIARKA, P.; SEITL, S.; OLIVER FIGUEIRA, C. Crack initiation angle in the biaxial stress field. In Applied Mechanics 2017 – conference proceedings, 2017. Brno: 2017. p. 69-73. ISBN: 978-80-87434-08- 6.
  Detail

  MIARKA, P.; SEITL, S.; HEVIA VILLANUEVA, M. Stress analysis of crack in Brazilian disc: Pilot calibration curves. In Conference Applied Mechanics 2017 – conference proceedings. Brno: 2017. p. 73-77. ISBN: 978-80-87434-08- 6.
  Detail

  SEITL, S.; MIARKA, P.; KALA, Z.; KLUSÁK, J. Effect of rivet holes on calibration curves for edge cracks under various loading types in steel bridge structure. In Procedia Structural Integrity. Procedia Structural Integrity. 2017. p. 697-704. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; MIARKA, P.; SOBEK, J.; KLUSÁK, J. A numerical investigation of the stress intensity factor for a bent chevron notched specimen: Comparison of 2D and 3D solutions. In Procedia Structural Integrity. Procedia Structural Integrity. 2017. p. 737-744. ISSN: 2452-3216.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; MIARKA, P. Evaluation of mixed mode I/II fracture toughness of C 50/60 from Brazilian disc test. Frattura ed Integrita Strutturale, 2017, vol. 42, no. 41, p. 119-127. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  KLON, J.; SEITL, S.; ŠIMONOVÁ, H.; KERŠNER, Z.; KUMPOVÁ, I.; VAVŘÍK, D. Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography. Frattura ed Integrita Strutturale, 2017, no. 42, p. 161-169. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  ŠIMONOVÁ, H.; SEITL, S.; FRANTÍK, P.; KERŠNER, Z. Research and Modelling in Civil Engineering 2017, chapter 4: A correction of fatigue characteristics of concrete with respect to age of specimens. In Research and Modelling in Civil Engineering 2017. Koszalin: Koszalin University of Technology Publishing House, 2017. p. 51-62. ISBN: 978-83-7365-474-7.
  Detail

  SEITL, S.; MIARKA, P.; SOBEK, J. Quantification of Influence of Epoxy Layer Between Interface Steel-Concrete on Calibration Curves for Modified Compact Tension Test. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2017, vol. 17, no. 2, p. 99-108. ISSN: 1804-4824.
  Detail | WWW | Full text in the Digital Library

  SOBEK, J.; SEITL, S. Determination of Stress Intensity Factor Value for Chevron-Notched Specimens – Pilot Study. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2017, vol. 17, no. 2, p. 125-130. ISSN: 1804-4824.
  Detail | WWW

  KLON, J.; SOBEK, J.; MALÍKOVÁ, L.; SEITL, S. Impact of specific fracture energy investigated in front of the crack tip of three-point bending specimen. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 41, p. 183-190. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; MALÍKOVÁ, L.; SOBEK, J.; FRANTÍK, P.; LOPÉZ-CRESPO, P. Williams expansion-based approximation of the stress field in an Al 2024 body with a crack from optical measurements. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 41, p. 323-331. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  SOBEK, J.; SEITL, S.; GONZALEZ MENENDEZ, S. Numerical modelling of a chevron notched bend specimen – plane model. In Fracture and Damage Mechanics, FDM 2017. Key Engineering Materials (web). 2017. p. 198-201. ISSN: 1662-9795.
  Detail

  MALÍKOVÁ, L.; SEITL, S.; KERŠNER, Z. Multi-parameter fracture mechanics: Practical use. In Research and modelling in civil engineering 2017. 1. Koszalin University of Technology: Publishing House, 2017. p. 1-15. ISBN: 978-83-7365-474-7.
  Detail

  KALA, Z.; OMISHORE, A.; SEITL, S.; KREJSA, M.; KALA, J. The effect of skewness and kurtosis on the probability evaluation of fatigue limit states. International Journal of Mechanics, 2017, no. 11, p. 166-175. ISSN: 1998-4448.
  Detail | WWW

  CIFUENTES, H.; LOZANO, M.; HOLUŠOVÁ, T.; MEDINA, F.; SEITL, S.; FERNÁNDEZ-CANTELI, A. Modified Disk- Shaped Compact Tension Test for Measuring Concrete, Fracture Properties. International Journal of Concrete Structures and Materials, 2017, vol. 11, no. 2, p. 215-228. ISSN: 2234-1315.
  Detail | WWW

  SEITL, S.; MIARKA, P.; MALÍKOVÁ, L.; KREJSA, M. Comparison of Calibration Functions for Short Edge Cracks under Selected Loads. In Key Engineering Materials. Key Engineering Materials (print). 2017. p. 353-356. ISBN: 978-3-0357-1168-4. ISSN: 1013-9826.
  Detail

  SEITL, S.; VISZLAY, V.; DOMSKI, J.; KATZER, J. Fracture Mechanical Properties of Cement Based Composites with Various Amount of Waste Aggregates. In Procedia Engineering: Structural and Physical Aspects of Construction Engineering. Procedia Engineering. Elsevier, 2017. p. 345-351. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  KREJSA, M.; SEITL, S; BROZOVSKY, J; LEHNER, P. Fatigue damage prediction of short edge crack under various load: Direct Optimized Probabilistic Calculation. In Procedia Structural Integrity. Procedia Structural Integrity. 2017. p. 1283-1290. ISSN: 2452-3216.
  Detail | WWW

  RŮŽIČKA, V.; MALÍKOVÁ, L.; SEITL, S. Over-deterministic method: The influence of rounding numbers on the accuracy of the values of Williams' expansion terms. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 42, p. 128-135. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  MALÍKOVÁ, L.; SEITL, S. Application of the Williams Expansion near a Bi-Material Interface. In Key Engineering Materials. Key Engineering Materials (web). 2017. p. 206-209. ISSN: 1662-9795.
  Detail

  SEITL, S.; MIARKA, P.; MERTA, I.; KERŠNER, Z. Numerical Stress Analysis of the Biaxial Tension-compression Wedge-splitting Test in Vicinity of the Crack Tip. Košice, Slovenská republika: 2017. p. 11-12.
  Detail

  SEITL, S.; DIEGO LIEDO, R. Numerical study and pilot evaluation of experimental data measured on specimen loaded by bending and wedge splitting forces. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 39, p. 100-109. ISSN: 1971-8993.
  Detail | WWW

  SEITL, S.; THIENPONT, T.; DE CORTE, W. Fatigue crack behaviour: comparing three-point bend test and wedge splitting test data on vibrated concrete using Paris' law. Frattura ed Integrita Strutturale, 2017, vol. 39, no. 11, p. 110-117. ISSN: 1971-8993.
  Detail | WWW

• 2016

  SEITL, S.; BÍLEK, V.; ŠIMONOVÁ, H.; KERŠNER, Z. Mechanical and fatigue parameters of two types of alkali-activated concrete. In Key Engineering Materials: Advances in Fracture and Damage Mechnics XIV. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2016. p. 129-132. ISBN: 978-3-03835-541-0. ISSN: 1013-9826.
  Detail

  HAVLÍKOVÁ, I.; FRANTÍK, P.; MAŠEK, J.; SOBEK, J.; ŠIMONOVÁ, H.; VESELÝ, V.; KERŠNER, Z.; SEITL, S.; MERTA, I.; SCHNEEMAYER, A. Evaluation of Fracture Tests of Concrete Specimens via Advanced Tool for Experimental Data Processing. In Applied Mechanics and Materials: Engineering Mechanics 2015. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016. p. 585-590. ISBN: 978-3-03835-700- 1. ISSN: 1660-9336.
  Detail

  HOLUŠOVÁ, T.; SEITL, S.; CIFUENTES, H.; FERNÁNDEZ-CANTELI, A. A numerical study of two different specimen fixtures for the modified compact tension test – their influence on concrete fracture parameters. Frattura ed Integrita Strutturale, 2016, vol. 10, no. 35, p. 242-249. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; VISZLAY, V. Modified compact tension specimen for experiments on cement based materials: comparison of 2D and 3D solutions. In Modelování v mechanice 2016. Ostrava, Česká republika: 2016. p. 1-6. ISBN: 978-80-248-3918- 9.
  Detail

  VESELÝ, V.; MERTA, I.; ŠIMONOVÁ, H.; SCHNEEMAYER, A.; SEITL, S.; KERŠNER, Z. Component wedge-splitting/bending test of notched specimens with various crack-tip constraint conditions: experiments and simulations. Berkeley, California, USA: 2016. p. 1-12.
  Detail

  SEITL, S.; RIOS JIMENEZ, J.; CIFUENTES, H.; VESELÝ, V. Effect of the Load Eccentricity on Fracture Behaviour of Cementitious Materials Subjected to the Modified Compact Tension Test. In MSMF8. Solid State Phenomena. Brno, Česká republika: Trans Tech Publications Ltd, 2016. p. 518-521. ISBN: 978-3-0383-5626-4. ISSN: 1662-9779.
  Detail | WWW

  THIENPONT, T.; DE CORTE, W.; SEITL, S. Self-compacting concrete, protecting steel reinforcement under cyclic load: evaluation of fatigue crack behavior. In 18th International Colloquium on Mechanical Fatigue of Metals (ICMFM). Procedia Engineering. AMSTERDAM: Elsevier, 2016. p. 207-213. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  MALÍKOVÁ, L.; VESELÝ, V.; SEITL, S. Crack propagation direction in a mixed mode geometry estimated via multi-parameter fracture criteria. INTERNATIONAL JOURNAL OF FATIGUE, 2016, vol. 2016, no. 89, p. 99-107. ISSN: 0142-1123.
  Detail

  KREJSA, M.; KALA, Z.; SEITL, S. Inspection Based Probabilistic Modeling of Fatigue Crack Progression. In Sustainable Development of Civil, Urban and Transportation Engineering Conference. Procedia Engineering. Elsevier, 2016. p. 146-153. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; THIENPONT, T. Numerical support for study of stress ratio effect on fatigue crack behaviour in three point bend specimen made from vibrated concrete. In Modelování v mechanice 2016. Ostrava, Česká republika: 2016. p. 1-6. ISBN: 978-80-248-3917- 2.
  Detail

  SEITL, S.; LIEDO, R.; HOLUŠOVÁ, T. Numerical support for specimen loaded by bending and wedge splitting forces for measurement of concrete properties. In Modelování v mechanice 2016. Ostrava, Česká republika: 2016. p. 1-7. ISBN: 978-80-248-3917- 2.
  Detail

  VESELÝ, V.; SOBEK, J.; FRANTÍK, P.; SEITL, S. Multi-parameter approximation of the stress field in a cracked body in the more distant surroundings of the crack tip. INTERNATIONAL JOURNAL OF FATIGUE, 2016, vol. 89, no. 1, p. 20-35. ISSN: 0142-1123.
  Detail | WWW

  SEITL, S.; ŠIMONOVÁ, H.; KERŠNER, Z.; DOMSKI, J.; KATZER, J. Method covering Ageing for Evaluation of Fatigue Parameters of Cement Based Composites with Waste Aggregates. Program and book of abstracts 24th Int. Conf. on Materials and Technology. Ljubljana: Inštitut za kovinske materiale in technologie, 2016. p. 188-188. ISBN: 978-961-94088-0- 3.
  Detail

• 2015

  HOLUŠOVÁ, T.; SEITL, S.; FERNÁNDEZ-CANTELI, A. Numerical Simulation of Modified Compact Tension Test depicting of Experimental Measurement by ARAMIS. In 13th International Conference on Fracture and Damage Mechanics. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2015. p. 277-280. ISSN: 1013-9826.
  Detail

  SEITL, S.; MERTA, I.; VESELÝ, V. Wedge splitting test of foam concrete specimens: Calibration curves. In International Conference on Fracture and Damage Mechanics, FDM 2014. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2015. p. 281-284. ISSN: 1013-9826.
  Detail

  VESELÝ, V.; FRANTÍK, P.; SOBEK, J.; MALÍKOVÁ, L.; SEITL, S. Multi-parameter crack tip stress state description for evaluation of nonlinear zone width in silicate composite specimens in component splitting/bending test geometry. Fatigue & Fracture of Engineering Materials & Structures, 2015, vol. 38, no. 1, p. 200-214. ISSN: 8756-758X.
  Detail

  HAVLÍKOVÁ, I.; FRANTÍK, P.; MAŠEK, J.; SOBEK, J.; ŠIMONOVÁ, H.; VESELÝ, V.; KERŠNER, Z.; SEITL, S.; MERTA, I.; SCHNEEMAYER, A. Evaluation of Fracture Tests of Concrete Specimens via Advanced Tool for Experimental Data Processing. Book of Extended Abstracts of the 21st Conference on Engineering Mechanics. Engineering mechanics 2014. Prague: Institute of Theoretical and Applied Mechanics, Academy of Sciences of the Czech Republic, v. v. i., 2015. p. 86-87. ISBN: 978-80-86246-42- 0. ISSN: 1805- 8248.
  Detail

  VESELÝ, V.; SOBEK, J.; TESAŘ, D.; FRANTÍK, P.; PAIL, T.; SEITL, S. Multi-parameter approximation of stress field in a cracked specimen using purpose-built Java applications. Frattura ed Integrita Strutturale, 2015, vol. 9, no. 33, p. 120-133. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  HOLUŠOVÁ, T.; LOZANO, M.; KOMÁRKOVÁ, T.; KOCÁB, D.; SEITL, S. Modified compact tension test: evaluation of the experiments of cylindrical specimens from cementitious composites. In Modelování v mechanice 2015. Ostrava, Česká republika: 2015. p. 1-9. ISBN: 978-80-248-3756- 7.
  Detail

  VESELÝ, V.; BEDÁŇ, J.; SOBEK, J.; SEITL, S. Work of fracture due to compressive component of loading in wedge splitting test on quasi-brittle cementitious specimens. In Fracture and Damage Mechanics, FDM 2014. Key Engineering Materials (print). Switzerland: 2015. p. 317-320. ISSN: 1013-9826.
  Detail

  CIFUENTES, H.; LOZANO, M.; HOLUŠOVÁ, T.; MEDINA, F.; SEITL, S.; FERNÁNDEZ-CANTELI, A. Applicability of a modified compact tension specimen for measuring the fracture energy of concrete. Anales de Mecánica de la Fractura, 2015, no. 32, p. 208-2013. ISSN: 0213-3725.
  Detail

  HOLUŠOVÁ, T.; LOZANO, M.; FERNÁNDEZ-CANTELI, A.; KOMÁRKOVÁ, T.; KOCÁB, D.; SEITL, S. Influence of the gripping fixture on the modified compact tension test results: evaluation of the experiments on cylindrical concrete specimens. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2015, vol. 15, no. 2, p. 1-11. ISSN: 1804-4824.
  Detail | WWW | Full text in the Digital Library

  MALÍKOVÁ, L.; VESELÝ, V.; SEITL, S. Estimation of the crack propagation direction in a mixed-mode geometry via multi-parameter fracture criteria. Frattura ed Integrita Strutturale, 2015, vol. 9, no. 33, p. 25-32. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; VISZLAY, V.; CIFUENTES, H.; CANTELI, A. Effects of specimen size and crack depth ratio on calibration curves for modified compact tension specimens. Transaction of the VŠB-Technical university of Ostrava, Mechanical series, 2015, vol. 15, no. 2, p. 1-10. ISSN: 1210- 0471.
  Detail

  SEITL, S.; VISZLAY, V. Stress Analysis of Modified Compact Tension Specimens: K- Calibration Curves. In Modelování v mechanice 2015. Ostrava, Česká republika: 2015. p. 1-8. ISBN: 978-80-248-3756- 7.
  Detail

  CASTAÑÓN, L.; NIETO, B.; LOZANO, M.; HOLUŠOVÁ, T.; SEITL, S.; FERNÁNDEZ-CANTELI, A. Ensayo de probeta compacta modificada para la determinación de parámetrocs de fractura en hormigón. Anales de Mecánica de la Fractura, 2015, no. 32, p. 202-207. ISSN: 0213-3725.
  Detail | WWW

• 2014

  SEITL, S.; KORTE, S.; DE CORTE, W.; BOEL, V.; SOBEK, J.; VESELÝ, V. Selecting a suitable specimen shape with low constraint value for determination of fracture parameters of cementitious composites. In 12th International Conference on Fracture and Damage Mechanics. Key Engineering Materials (web). 2014. p. 481-484. ISBN: 978-3-03785-830-1. ISSN: 1662-9795.
  Detail

  HOLUŠOVÁ, T.; SEITL, S.; FERNÁNDEZ-CANTELI, A. Comparison of fracture energy values obtained from 3PB, WST and CT test configurations. In Structural and Physical Aspects of Civil Engineering. Advanced Materials Research (online). Switzerland: Trans Tech Publications, 2014. p. 89-92. ISBN: 978-3-03835-147-4. ISSN: 1662-8985.
  Detail

  ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; HAVLÍKOVÁ, I.; SEITL, S.; KERŠNER, Z. Complex evaluation of fatigue tests results of plain C30/37 and C45/55 class concrete specimens. In Materials Structure & Micromechanics of Fracture VII. Key Engineering Materials (print). Switzerland: Trans Tech Publication, 2014. p. 801-804. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
  Detail

  PRZYBILLA, C.; SEITL, S.; KERŠNER, Z.; FERNÁNDEZ-CANTELI, A. Probabilistic description of the S- N field of concrete using Weilbull and Gumbel fatigue software. In International Probabilistic Workshop. Brno, Česká republika: 2014. p. 355-361. ISBN: 978-80-214-4800- 1.
  Detail

  FERNÁNDEZ-CANTELI, A.; CASTAÑÓN, L.; NIETO, B.; LOZANO, M.; HOLUŠOVÁ, T.; SEITL, S. Determining fracture energy parameters of concrete from the modified compact tension test. Frattura ed Integrita Strutturale, 2014, vol. 8, no. 30, p. 383-393. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  VESELÝ, V.; SOBEK, J.; FRANTÍK, P.; ŠTAFA, M.; MALÍKOVÁ, L.; SEITL, S. Estimation of the zone of failure extent in quasi-brittle specimens with different crack-tip constraint conditions from stress field. In 7th International Conference Materials Structure & Micromechanics of Fracture (MSMF-7). Key Engineering Materials (print). 2014. p. 262-265. ISBN: 978-80-214-4739-4. ISSN: 1013-9826.
  Detail

  VISZLAY, V.; HOLUŠOVÁ, T.; SEITL, S. Modified compact tension test: Calibration curve for evaluating the crack growth. Německo: 2014. p. 56-59.
  Detail

  SOBEK, J.; VESELÝ, V.; SEITL, S. Combination of wedge splitting and bending fracture test − crack tip stress field and nonlinear zone extent analysis. In Advanced Materials Research. Advanced Materials Research. 2014. p. 67-72. ISBN: 978-3-03835-147-4. ISSN: 1022-6680.
  Detail

  HAVLÍKOVÁ, I.; MERTA, I.; SCHNEEMAYER, A.; ŠIMONOVÁ, H.; VESELÝ, V.; SEITL, S.; FRANTÍK, P.; KERŠNER, Z. K problematice kvantifikace iniciace stabilního šíření trhlin betonem s využitím štípacího testu a lomového modelu dvojí- K. Kobylí, Česká republika: 2014. p. 1-12.
  Detail

  HOLUŠOVÁ, T.; SEITL, S.; FERNÁNDEZ-CANTELI, A. Modified compact tension test: the influence of the steel bars position. In Engineering Mechanics 2014. Svratka, Česká republika: 2014. p. 1-4. ISBN: 978-80-214-4871-1.
  Detail

  SEITL, S.; BÍLEK, V.; KERŠNER, Z. Comparison of Fatigue Parameters of Alkali- Activated and Ordinary Portland Cement Based Concretes. In Non-Traditional Cement & Concrete V. Brno, Česká republika: 2014. p. 201-204. ISBN: 978-80-214-4867- 4.
  Detail

  SEITL, S.; BÍLEK, V.; KERŠNER, Z. Comparison of Fatigue Parameters of Alkali- Activated and Ordinary Portland Cement Based Concretes. International Journal of Research in Engineering and Technology, 2014, vol. 3, no. 13, p. 203-208. ISSN: 2321- 7308.
  Detail

  SEITL, S.; SÁNCHEZ BERMEJO, C.; SOBEK, J.; VESELÝ, V. Two Parameter description of crack tip stress fields for wedge splitting test specimen: Influence of wedge angle. In Advanced Materials Research. Advanced Materials Research. 2014. p. 345-350. ISBN: 978-3-03835-147-4. ISSN: 1022-6680.
  Detail

• 2013

  ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; SEITL, S. The effect of constraint level on a crack path. ENGINEERING FAILURE ANALYSIS, 2013, vol. 2013 (29), no. 1, p. 83-92. ISSN: 1350- 6307.
  Detail

  HOLUŠOVÁ, T.; SEITL, S.; LOZANO, M.; FERNÁNDEZ-CANTELI, A. Numerická podpora zkoušky excentrickým tahem aplikovaná na kvazikřehké materiály. In 11. Mezinárosní konference Modelování v mechanice 2013. Ostrava, Česká republika: Vysoká škola báňská - Technická univerzita Ostrava, 2013. p. 1-9. ISBN: 978-80-248-2985- 2.
  Detail

  ŠIMONOVÁ, H.; HAVLÍKOVÁ, I.; KERŠNER, Z.; SEITL, S. Statistical evaluation of fatigue tests of plain C30/37 and C45/ 55 class concrete specimens. In Fracture Mechanics of Concrete and Concrete Structures. Barcelona, Španělsko: 2013. p. 1-6. ISBN: 978-84-941004-1- 3.
  Detail

  ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; HAVLÍKOVÁ, I.; SEITL, S.; KERŠNER, Z. Complex evaluation of fatigue tests results of plain C30/37 and C45/ 55 class concrete specimen. Materials structures & Micromechanics of Fracture. Brno, Česká republika: 2013. p. 243-243. ISBN: 978-80-214-4739- 4.
  Detail

  VESELÝ, V.; SOBEK, J.; MALÍKOVÁ, L.; FRANTÍK, P.; SEITL, S. Multi- parameter crack tip stress state description for estimation of fracture process zone extent in silicate composite WST specimens. Frattura ed Integrita Strutturale, 2013, vol. 2013, no. 25, p. 69-78. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  VESELÝ, V.; SOBEK, J.; FRANTÍK, P.; ŠTAFA, M.; MALÍKOVÁ, L.; SEITL, S. Estimation of extent of zone of failure in quasi-brittle specimens with different crack- tip constraint conditions from stress field. Materials Structure & Micromechanics of Fracture. Brno, Česká republika: 2013. p. 75-75. ISBN: 978-80-214-4739- 4.
  Detail

  PRYL, D.; ŠIMONOVÁ, H.; PUKL, R.; KERŠNER, Z.; ČERVENKA, J.; SEITL, S. Odezva betonových trámců na cyklické zatěžování: numerické modelování a testy. In Betonářské dny 2013. Hradec Králové, Česká republika: 2013. p. 440-443. ISBN: 978-80-87158-34- 0.
  Detail

  HOLUŠOVÁ, T.; SEITL, S. Numerical support for a modified compact tension test for concrete: The influence of selected parameters. In 2nd International conference Structural and Physical Aspects of Civil Engineering 2013. Štrbské Pleso, Slovensko: 2013. p. 1-7. ISBN: 978-80-553-1488- 4.
  Detail

  HOLUŠOVÁ, T.; SEITL, S.; FERNÁNDEZ-CANTELI, A. Numerická podpora experimentální zkoušky excentrickým tahem na válcových betonových tělesech. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2013, vol. XIII, no. 2, p. 119-128. ISSN: 1213- 1962.
  Detail

  HOLUŠOVÁ, T.; SEITL, S.; FERNÁNDEZ-CANTELI, A. Numerical support of experimental compact tension test on concrete cylindric specimens. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2013, vol. XIII, no. 2, p. 1-10. ISSN: 1213- 1962.
  Detail

  SEITL, S.; SÁNCHEZ BERMEJO, C.; SOBEK, J.; VESELÝ, V. Wedge splitting test: Influence of wedge angle on fracture parameters. In Structural and Physical Aspects of Civil Engineering. Košice: Technical University of Košice, 2013. p. 1-5. ISBN: 978-80-553-1488- 4.
  Detail

  SOBEK, J.; VESELÝ, V.; SEITL, S. Lomový test se zatěžováním kombinací štípání a ohybu − analýza napjatosti u čela trhliny a rozsahu lomové procesní zóny. In Structural and Physical Aspects of Civil Engineering. Košice, Slovenská republika: 2013. p. 1-6. ISBN: 978-80-553-1488- 4.
  Detail

  SEITL, S.; KLUSÁK, J.; FERNÁNDEZ, P.; CANTELI, A. Thermographic determination methods: Application on fatigue limit of al 2024 for R=0. 1. Velké Karlovice, Česká republika: 2013. p. 1-2.
  Detail

• 2012

  ŠIMONOVÁ, H.; KERŠNER, Z.; SEITL, S.; PRYL, D.; PUKL, R. Korekce únavových parametrů betonu s využitím aproximací lomově- mechanických parametrů v čase. Beton TKS, 2012, vol. 12, no. 1, p. 57-59. ISSN: 1213- 3116.
  Detail

  HOLUŠOVÁ, T.; SEITL, S. Numerická studie vlivu kvality MKP sítě v okolí bi-materiálového rozhraní na průběh zatěžovací síly: Push- out test. In Sborník rozšířených abstraktů vědecké konference Modelování v mechanice 2012. Ostrava: VŠB - Technická univerzita Ostrava, 2012. p. 1-7. ISBN: 978-80-248-2694- 3.
  Detail

  HOLUŠOVÁ, T.; SEITL, S. Calculation of fatigue crack lengths from CMOD measurement performed on concrete 3PB specimens. In XIIIth Bilateral Czech/German Symposium 2012, Experimental methods and numerical simulation in engineering sciences. Telč, Česká republika: Czech Technical University in Prague, 2012. p. 39-42. ISBN: 978-80-01-05062- 0.
  Detail

  HOLUŠOVÁ, T.; SEITL, S. Push-out test: Numerical study of the influence of the steel plates thicknesses on load test process. 28th conference with international participation Computational Mechanics 2012. Pilsen: University of West Bohemia, 2012. p. 1-2. ISBN: 978-80-261-0157- 4.
  Detail

  HOLUŠOVÁ, T.; KLUSÁK, J.; SEITL, S. Protlačovací zkouška: Numerická studie vlivu velikosti betonové části na průběh zatěžovací zkoušky. In Víceúrovňový design pokrokových materiálů 2012. Brno: Ústav fyziky materiálů, 2012. p. 87-94. ISBN: 978-80-87434-06- 2.
  Detail

  PUKL, R.; PRYL, D.; KERŠNER, Z.; SEITL, S. Numerické modelování únavového poškozování betonu. In Betonárské dní 2012. Bratislava, Slovenská republika: 2012. p. 231-236. ISBN: 978-80-8076-104- 2.
  Detail

  SEITL, S.; KNÉSL, Z.; ŠIMONOVÁ, H.; KERŠNER, Z. Fatigue crack growth in cement based composites: Experimental aspects. In Life- Cycle and Sustainability of Civil Infrastructure Systems. Vídeň, Rakousko: 2012. p. 1314-1317. ISBN: 978-0-415-62126- 7.
  Detail

  SOBEK, J.; VESELÝ, V.; SEITL, S. Studie závislosti hodnot tvarových funkcí pro tělesa s trhlinou na tvaru příložky při modelování testu klínovým štípáním. In Juniorstav 2012. Brno, Česká republika: 2012. p. 1-7. ISBN: 978-80-214-4393- 8.
  Detail

  VESELÝ, V.; HOLUŠOVÁ, T.; SEITL, S. Numerical prediction of parasitic energy dissipation in wedge splitting tests on concrete specimens. In 18th International Conference Engineering mechanics 2012. Svratka, Česká republika: 2012. p. 368-369. ISBN: 978-80-86246-40- 6.
  Detail

  SEITL, S.; KERŠNER, Z.; BÍLEK, V. Cement based composites with fibres for thin wall elements: fatigue parameters. In 10th International Symposium on Ferrocement and Thin Reinforced Cement Composites. Havana, Cuba: 2012. p. 123-128. ISBN: 978-959-247-098- 9.
  Detail

  VESELÝ, V.; SOBEK, J.; ŠESTÁKOVÁ, L.; SEITL, S. Accurate description of near-crack-tip fields for the estimation of inelastic zone extent in quasi- brittle materials. Key Engineering Materials (web), 2012, vol. 525- 526, no. 1, p. 529-532. ISSN: 1662- 9795.
  Detail

  HOLUŠOVÁ, T.; KLUSÁK, J.; SEITL, S. Vliv vybraných parametrů na průběh protlačovací zkoušky. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2012, vol. XII, no. 2, p. 313-322. ISSN: 1213- 1962.
  Detail

• 2011

  HUTAŘ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; SEITL, S.; KRUML, T.; POLÁK, J. Fatigue crack propagation rate in EUROFER 97 estimated using small specimens. Key Engineering Materials (print), 2011, vol. 452- 453, no. -, p. 325-328. ISSN: 1013-9826.
  Detail

  PRYL, D.; PUKL, R.; SEITL, S.; KERŠNER, Z. Poškozování betonu cyklickým tahovým zatížením – experiment a model. Beton TKS, 2011, vol. 11, no. 2, p. 48-51. ISSN: 1213- 3116.
  Detail

  SEITL, S.; VESELÝ, V.; ŘOUTIL, L. Two-parameter fracture mechanical analysis of a near-crack- tip stress field in wedge splitting test specimens. COMPUTERS & STRUCTURES, 2011, vol. 2011, no. 89, p. 1852-1858. ISSN: 0045- 7949.
  Detail

  VESELÝ, V.; ŠESTÁKOVÁ, L.; SEITL, S. Influence of boundary conditions on higher order terms of near-crack- tip stress field in a WST specimen. Key Engineering Materials, 2011, vol. 2012, no. 488- 489, p. 399-402. ISSN: 1013- 9826.
  Detail

  ŘOUTIL, L.; VESELÝ, V.; SEITL, S. Fracture analysis of cube- and cylinder- shaped WST specimens made of cementitious composites with various characteristic length. Key Engineering Materials, 2011, vol. 2012, no. 488- 489, p. 533-536. ISSN: 1013- 9826.
  Detail

  SEITL, S.; VESELÝ, V.; ŘOUTIL, L. Analýza vlivu proporcí válcového zkušebního tělesa na lomové parametry při zkoušce klínovým štípáním. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2011, vol. XI, no. 1, p. 299-308. ISSN: 1213- 1962.
  Detail

  ŘOUTIL, L.; VESELÝ, V.; SEITL, S.; KLUSÁK, J. Optimal propotions of wedge splitting test specimen for testing of various cement based composites. Luxor, Egypt: 2011. p. 457-465.
  Detail

  VESELÝ, V.; PAIL, T.; FRANTÍK, P.; SEITL, S. Fracture process zone extent and energy dissipation in silicate composites with different cohesive behaviour. In Proceedings of the 2nd International RILEM Conference Strain Hardening Cementitious Composites. Rio de Janeiro: 2011. p. 259-267. ISBN: 978-2-35158-120- 9.
  Detail

  ŘOUTIL, L.; VESELÝ, V.; SEITL, S. Wedge splitting test of quasi-brittle cylinder-shaped specimen: Numerical study on minimal notch length. In Applied Mechanics 2011. Velké Bílovice: 2011. p. 179-182. ISBN: 978-80-87434-03- 1.
  Detail

  SOBEK, J.; VESELÝ, V.; SEITL, S.; ŠESTÁKOVÁ, L. Study on determination of accurate approximation of near-crack- tip stress and displacement fields in cracked bodies. In Book of extended abstracts of conference Computational Mechanics 2011. Plzeň: 2011. p. 1-2. ISBN: 978-80-261-0027- 0.
  Detail

  SEITL, S.; VESELÝ, V. Wedge splitting test: Analýza vlivu proporcí válcového zkušebního tělesa na lomové parametry. Bratislava: 2011. p. 1-10.
  Detail

  SEITL, S.; ŠIMONOVÁ, H.; KERŠNER, Z.; FERNÁNDEZ-CANTELI, A. Evaluation of concrete fatigue measurements using standard and non- linear regression model. Applied Mechanics and Materials, 2011, vol. 2011, no. 10, p. 121-126. ISSN: 1662- 7482.
  Detail

  SEITL, S.; ŠIMONOVÁ, H.; KERŠNER, Z.; PUKL, R.; PRYL, D. Základní únavové charakteristiky betonu C45/55 z testů vzorků tříbodovým ohybem. In Sborník příspěvků konference 18. Betonářské dny 2011. Hradec Králové: 2011. p. 547-550. ISBN: 978-80-87158-30-2.
  Detail

  ŠIMONOVÁ, H.; KERŠNER, Z.; SEITL, S. Correction of fatigue parameter values of concrete using approximation of mechanical- fracture parameter values in time. In ENGINEERING MECHANICS 2011 - 17th International Conference. Svratka: 2011. p. 595-598. ISBN: 978-80-87012-33- 8.
  Detail

  NÁHLÍK, L.; ZOUHAR, M.; ŠEVČÍK, M.; SEITL, S.; MAJER, Z. 13th Applied mechanics 2011 conference proceeding. 13th Applied mechanics 2011 conference proceeding. 2011. ISBN: 978-80-87434-03- 1.
  Detail

• 2010

  VESELÝ, V.; GROCHALOVÁ, E.; SEITL, S.; KERŠNER, Z. Numerical simulation of wedge- splitting tests on specimens made of cementitious composites preparation for experimental testing. In Structural and Physical Aspects of Civil Engineering. Štrbské Pleso, Slovenská republika: 2010. p. 1-9. ISBN: 978-80-89284-68- 9.
  Detail

  SEITL, S.; KLUSÁK, J.; ŘOUTIL, L. Numerická studie vlivu šířky drážky pro aplikaci zatížení na chování iniciační trhliny v tělese pro WST. In Modelování v mechanice 2010. Ostrava, Česká republika: 2010. p. 43-49. ISBN: 978-80-248-2234- 1.
  Detail

  ŘOUTIL, L.; VESELÝ, V.; SEITL, S.; KLUSÁK, J. Posouzení geometrie zkušebního tělesa pro WST kvazikřehkých kompozitů: Numerická studie. In Křehký lom 2010. Brno, Česká repoublika: 2010. p. 201-212. ISBN: 978-80-87434-01- 7.
  Detail

  HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; ZOUHAR, M.; SEITL, S.; KNÉSL, Z.; FERNÁNDEZ-CANTELI, A. Fracture mechanics of the three-dimensional crack front: vertex singularity versus out of plain constraint descriptions. Procedia Engineering, 2010, vol. 2, no. 1, p. 2095-2102. ISSN: 1877- 7058.
  Detail

  HUTAŘ, P.; SEITL, S.; NÁHLÍK, L.; KNÉSL, Z. Fatigue crack propagation in thin structures. Key Engineering Materials, 2010, vol. 417- 418, no. xxx, p. 257-260. ISSN: 1013- 9826.
  Detail

  SEITL, S.; KLUSÁK, J.; VESELÝ, V.; ŘOUTIL, L. Wedge-Splitting Test Determination of Minimal Starting Notch Length for Various Cement Based Composites. Part II: Crack and Notch Fracture Mechanics Approaches. Key Engineering Materials, 2010, vol. 10, no. 4, p. 81-84. ISSN: 1013- 9826.
  Detail

  SEITL, S.; KERŠNER, Z.; BÍLEK, V.; KNÉSL, Z. Fatigue parameters of cement- based composites with various types of fibres. Key Engineering Materials, 2010, vol. 417, no. 4, p. 129-132. ISSN: 1013- 9826.
  Detail

  SEITL, S.; BÍLEK, V.; KERŠNER, Z.; VESELÝ, J. Cement based composites for thin building elements: Fracture and fatigue parameters. Procedia Engineering, 2010, vol. 2, no. 1, p. 911-916. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  VESELÝ, V.; GROCHALOVÁ, E.; SEITL, S.; KERŠNER, Z. Numerical simulation of wedge- splitting tests on specimens made of cementitious composites preparation for experimental testing. Journal of Civil Engineering, 2010, vol. 5, no. 2, p. 105-112. ISSN: 1336- 9024.
  Detail

  VESELÝ, V.; ŘOUTIL, L.; SEITL, S. Wedge-Splitting Test - Determination of Minimal Starting Notch Length for Various Cement Based Composites. Part I: Cohesive Crack Modelling. Key Engineering Materials (print), 2010, vol. 10, no. 4, p. 77-80. ISSN: 1013- 9826.
  Detail

• 2009

  SEITL, S.; HUTAŘ, P.; VESELÝ, V.; KERŠNER, Z. T-stress values during fracture in wedge splitting test geometries: A numerical study. In Brittle Matrix Composites (BMC-9). warsawa, Polsko: 2009. p. 419-428. ISBN: 978-83-89687-48- 7.
  Detail

  SEITL, S.; KNÉSL, Z.; VESELÝ, V.; ŘOUTIL, L. A refined description of the crack tip stress field in wedge-splitting specimens - a two-parameter fracture mechanics approach. Applied andComputational Mechanics, 2009, vol. 1, no. 4, p. 1-16. ISSN: 1802-680X.
  Detail

  HUTAŘ, P.; SEITL, S.; NÁHLÍK, L.; ŠEVČÍK, M.; KNÉSL, Z. Stress distribution along the 3D crack front. Computational Mechanics 2009. Plzeň: Západočeská univerzita, 2009. p. 1-2. ISBN: 978-80-7043-824- 4.
  Detail

  SEITL, S.; KERŠNER, Z.; BÍLEK, V.; KNÉSL, Z. Fatigue parametres of cement- based composites with various types of fibres. Key Engineering Materials, 2009, vol. 417, no. 4, p. 129-132. ISSN: 1013- 9826.
  Detail

  SEITL, S.; KERŠNER, Z.; BÍLEK, V.; KNÉSL, Z. Glass fibre reinforced cement based composite: fatigue and fracture parameters. Applied andComputational Mechanics, 2009, vol. 3, no. 2, p. 363-374. ISSN: 1802-680X.
  Detail | WWW | Full text in the Digital Library

  SEITL, S.; ŘOUTIL, L.; VESELÝ, V. Numerická analýza vlivu vlastní tíhy vzorku pro klínové štípání na úroveň constraintu u čela trhliny. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2009, vol. 9, no. 1, p. 227-234. ISSN: 1213- 1962.
  Detail

• 2008

  ŘOUTIL, L.; VESELÝ, V.; KERŠNER, Z.; SEITL, S.; KNÉSL, Z. Fracture process zone size and energy dissipated during crack propagation in quasi- brittle materials. In Proceedings of 17th European Conference on Fracture. Brno: VUTIUM Brno, 2008. p. 619-626. ISBN: 9781617823190.
  Detail

  SEITL, S.; ŘOUTIL, L.; KLUSÁK, J.; VESELÝ, V. The influence of the shape of a saw-cut notch in quasi- brittle 3PB specimens on the critical applied force. Applied andComputational Mechanics, 2008, vol. 2, no. 1, p. 123-132. ISSN: 1802- 680X.
  Detail

  HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z.; SEITL, S. The influence of vertex singularities on fatigue crack shape. In ECF17 - European Conference on Fracture 17. Brno: VUTIUM, 2008. p. 1060-1066. ISBN: 9781617823190.
  Detail

• 2007

  SEITL, S.; KLUSÁK, J.; KERŠNER, Z.; KNÉSL, Z. Evaluation of notch geometry effect on behaviour of fracture toughness testing specimen. In Engineering mechanics 2007. Svratka, Česká republika: 2007. p. 243-244. ISBN: 978-80-87012-06- 2.
  Detail

  SEITL, S.; KLUSÁK, J.; KNÉSL, Z.; KERŠNER, Z. Influence of notch geometry on fracture behaviour of three-point bend notched specimens from quasi- brittle materials. In Recent Developments in structural engineering, mechanics and computation. Cape Town, south Africa: 2007. p. 655-658. ISBN: 978-90-5966-054- 0.
  Detail

  SEITL, S.; KLUSÁK, J.; KNÉSL, Z.; KERŠNER, Z. Influence of notch geometry on fracture behaviour of three-point bend notched specimens from quasi- brittle materials. Cape Town, South Africa: 2007. p. 245-246.
  Detail

  SEITL, S.; KLUSÁK, J.; KERŠNER, Z. Vliv šířky zářezu na růst trhliny pro různé konfigurace vzorků pro tříbodový ohyb. Materiálové inžinierstvo, 2007, vol. 14, no. 3, p. 213-219. ISSN: 1335- 0803.
  Detail

  SEITL, S.; KLUSÁK, J.; KERŠNER, Z.; KNÉSL, Z. Evaluation of notch geometry effect on behaviour of fracture toughness testing specimen. Svratka, Česká republika: 2007. p. 243-244.
  Detail

  FRANTÍK, P.; KERŠNER, Z.; KLUSÁK, J.; SEITL, S. Lomová houževnatost z tříbodového ohybu vzorků z kvazikřehkých materiálů: korekce vzhledem k šířce zářezu. In Experiment 2007. Brno, Česká republika: 2007. p. 77-80. ISBN: 978-80-7204-543- 3.
  Detail

• 2000

  SEITL, S. Two parameter fracture mechanics: prediction of the direction of crack growth. In ENGINEERING MECHANICS 2000. Svratka, Czech Republic: Institute of Theoretical and Applied Mechamics Academy of Sciences of the Czech Republic, Praha, 2000. p. 9 ( p.)ISBN: 80-86246-07- 8.
  Detail

*) Publications are generated once a 24 hours.