Ing.

Tomáš Žlebek

Ph.D.

FCE, THD

+420 54114 7530
Tomas.Zlebek@vut.cz

Send BUT message

Ing. Tomáš Žlebek, Ph.D.

Publications

  • 2022

    HODUL, J.; ŽLEBEK, T. Chemicky odolné nátěrové hmoty aplikovatelné i jako nástřiky s využitím druhotných surovin. Zpravodaj WTA CZ, 2022, no. 1-2/2022, p. 16-21. ISSN: 1213-7308.
    Detail | WWW

  • 2021

    DUFKA, A.; ŽLEBEK, T.; MELICHAR, T. Analysis of the effect of crystallization additives on the resistance of self-compacting concrete exposed to aggressive gases. In Binders, Materials and Technologies in Modern Construction VII. Solid State Phenomena. Switzerland: Trans tech publications Ltd, 2021. p. 194-199. ISBN: 978-3-0357-1870-6. ISSN: 1012-0394.
    Detail

    HODUL, J.; ŽLEBEK, T.; MÉSZÁROSOVÁ, L.; JAKUBÍK, A.; DROCHYTKA, R. Adhesives for the installation of cast basalt elements on metal and comparison of properties when using different types of fillers. In Proceedings of the 22nd Conference on the Rehabilitation and Reconstruction of Buildings. Key Engineering Materials (print). Lenka Mészárosová. Switzerland: Trans Tech Publications Ltd., 2021. p. 35-41. ISBN: 978-3-0357-1810-2. ISSN: 1013-9826.
    Detail

    ŽLEBEK, T.; HODUL, J.; MÉSZÁROSOVÁ, L.; DROCHYTKA, R. Chemical Stability of Innovative Grouts for Cast Basalt Elements. In IOP Conf. Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2021. p. 1-7. ISSN: 1757-8981.
    Detail | WWW | Full text in the Digital Library

    ŽLEBEK, T.; HODUL, J.; DROCHYTKA, R. Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings. In Proceedings of the 22nd Conference on the Rehabilitation and Reconstruction of Buildings. Key Engineering Materials (print). Lenka Mészárosová. Switzerland: Trans Tech Publications Ltd., 2021. p. 49-55. ISBN: 978-3-0357-1810-2. ISSN: 1013-9826.
    Detail | WWW

  • 2020

    HODUL, J.; ŽLEBEK, T.; MÉSZÁROSOVÁ, L.; DROCHYTKA, R. Sledování chemické odolnosti inovativní polymerní spárovací hmoty. TZB-info, 2020, no. 1, p. 1-6. ISSN: 1801-4399.
    Detail | WWW

    ŽLEBEK, T.; HODUL, J.; MÉSZÁROSOVÁ, L.; MATUŠKOVÁ, V.; DROCHYTKA, R. CHEMICKÁ STABILITA INOVATIVNÍ SPÁROVACÍ HMOTY. In JUNIORSTAV 2020 - 22. ODBORNÁ KONFERENCE DOKTORSKÉHO STUDIA - SBORNÍK PŘÍSPĚVKŮ. Brno: Vysoké učení technické v Brně, fakulta stavební, 2020. p. 695-699. ISBN: 978-80-86433-73-8.
    Detail

    ŽLEBEK, T.; HODUL, J.; MÉSZÁROSOVÁ, L.; MATUŠKOVÁ, V.; DROCHYTKA, R. Solidification Methods of Stabilizing Dangerous Wastes Used as Fillers for Secondary Protection of Building Structures. In Rehabilitation and Reconstruction of Buildings III. Key Engineering Materials (print). Michaela Kostelecká. Trans Tech Publications, 2020. p. 135-141. ISBN: 9783035736533. ISSN: 1013-9826.
    Detail | WWW

    MÉSZÁROSOVÁ, L.; ŽLEBEK, T.; HLAVIČKA, V.; DROCHYTKA, R. Alternativní možnosti využití druhotných surovin v aplikaci s epoxidovým pojivem. Zpravodaj WTA CZ, 2020, vol. 2020, no. 1-2, p. 9-12. ISSN: 1213-7308.
    Detail | WWW

  • 2019

    HODUL, J.; MÉSZÁROSOVÁ, L.; ŽLEBEK, T.; DROCHYTKA, R.; DUFEK, Z. Impact of Aggressive Media on the Properties of Polymeric Coatings with Solidification Products as Fillers. Coatings, MDPI, 2019, vol. 9, no. 12, p. 1-24. ISSN: 2079-6412.
    Detail | WWW | Full text in the Digital Library

    ŽLEBEK, T.; HODUL, J.; DROCHYTKA, R. Utilization of Waste Packaging Glass as Progressive Filler in Polymer Anchor Material Based on Epoxy Resin. In 12th Envibuild – Buildings and Environment – From Research to Application. Applied Mechanics and Materials. Ulrich Pont, Matthias Schuss and Ardeshir Mahdavi. Switzerland: Trans Tech Publications, 2019. p. 40-47. ISSN: 1660-9336.
    Detail | WWW

    HODUL, J.; ŽLEBEK, T.; MÉSZÁROSOVÁ, L.; DROCHYTKA, R. POLYMERNÍ NÁTĚROVÁ HMOTA S VYUŽITÍM POPÍLKŮ A NEBEZPEČNÝCH ODPADŮ. In Popílky ve stavebnictví. Ing. Věra Heřmánková, Ph.D. Brno: Fakulta stavební VUT v Brně, 2019. p. 109-116. ISBN: 978-80-214-5751-5.
    Detail

    HODUL, J.; ŽLEBEK, T.; DROCHYTKA, R.; MÉSZÁROSOVÁ, L. Possibilities of Using Hazardous Waste as Filler to Polymer Mortar. In Binders, Materials and Technologies in Modern Construction V. Solid State Phenomena. Dr. Karel Dvořák and Dominik Gazdič. Switzerland: Trans Tech Publications, 2019. p. 93-98. ISBN: 978-3-0357-1550-7. ISSN: 1012-0394.
    Detail | WWW

    HODUL, J.; ŽLEBEK, T.; JAKUBÍK, A.; DROCHYTKA, R. PROTECTION OF THE CAST BASALT SEWERS FOR ENHANCING RESISTANCE TO BIOCORROSION. In PROCEEDINGS OF THE SEVENTH INTERNATIONAL COLLOQUIUM ON PERFORMANCE, PROTECTION AND STRENGTHENING OF STRUCTURES UNDER EXTREME LOADING AND EVENTS. N. Banthia, S. Soleimani-Dashtaki, V. Kodur, B. Wu, K. Fujikake, and N. Suresh. Whistler, Kanada: The University of British Columbia, 2019. p. 1-12. ISBN: 978-0-88865-341-3.
    Detail

    HODUL, J.; DROCHYTKA, R.; ŽLEBEK, T. Mechanically Resistant Composite Material Using Optimal Amount of Pre-treated Hazardous Waste. In Key Engineering Materials (print). Key Engineering Materials (print). Switzerland: Trans Tech Publications Ltd, 2019. p. 75-81. ISBN: 978-3-0357-1492-0. ISSN: 1013-9826.
    Detail | WWW

    HODUL, J.; ŽLEBEK, T.; DROCHYTKA, R. MOŽNOSTI VYUŽITÍ SPECIÁLNĚ UPRAVENÉHO NEBEZPEČNÉHO ODPADU JAKO PLNIVA DO POLYMERNÍ SPÁROVACÍ HMOTY. In JUNIORSTAV 2019 21. ODBORNÁ KONFERENCE DOKTORSKÉHO STUDIA. Brno: Vysoké učení technické v Brně, Fakulta stavební, 2019. p. 508-513. ISBN: 978-80-86433-71-4.
    Detail

    HODUL, J.; MÉSZÁROSOVÁ, L.; ŽLEBEK, T.; DROCHYTKA, R. Temperature and chemical resistance of repair composite and microstructure monitoring depending on different type of binder and filler. In XXV International Conference and Meeting of Departments, CONSTRUMAT 2019. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2019. p. 20-27. ISSN: 1757-8981.
    Detail | WWW

    HODUL, J.; ŽLEBEK, T.; DROCHYTKA, R. Polymer based grout with specially treated hazardous waste. In XXV International Conference and Meeting of Departments, CONSTRUMAT 2019. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2019. p. 50-58. ISSN: 1757-8981.
    Detail | WWW

  • 2018

    HODUL, J.; ŽLEBEK, T.; DROCHYTKA, R. Possibilities of filling polymeric anchors with secondary raw materials with effect on price and final parameters. Advanced Materials Letters, 2018, vol. 1, no. 10, p. 29-34. ISSN: 0976-3961.
    Detail | WWW

    HODUL, J.; ŽLEBEK, T. STUDIUM VLIVU PLNIVA NA FYZIKÁLNE-MECHANICKÉ VLASTNOSTI KOTEVNÍ HMOTY. In 20. ODBORNÁ KONFERENCE DOKTORSKÉHO STUDIA - JUNIORSTAV 2018. Brno: Vysoké učení technické v Brně, fakulta stavební, 2018. p. 940-945. ISBN: 978-80-86433-69-1.
    Detail

    HODUL, J.; DROCHYTKA, R.; ŽLEBEK, T. Special Grout for Anchoring Steel Elements with High Proportion of Fly Ash Contaminated by Denitrification Process. In Binders, Materials and Technologies in Modern Construction IV. Solid State Phenomena. Karel Dvořák, Dominik Gazdič and Iveta Hajkova. Switzerland: scientific.net, 2018. p. 160-166. ISBN: 978-3-0357-1348-0. ISSN: 1012-0394.
    Detail

    ŽLEBEK, T.; HODUL, J.; DROCHYTKA, R. Utilization of fly ash contaminated by SNCR flue gas denitrification into polymer epoxy anchor. In 19th International Conference on Rehabilitation and Reconstruction of Building 2017. Key Engineering Materials (print). Michaela Kostelecká. Switzerland: Trans Tech Publications Ltd., 2018. p. 98-103. ISBN: 978-3-0357-1361-9. ISSN: 1013-9826.
    Detail | WWW

    HODUL, J.; ŽLEBEK, T.; DROCHYTKA, R. Development of Epoxy Grout Containing Fine Waste from Production of Mineral Wool Board Insulation. Applied Mechanics and Materials, 2018, no. 878, p. 275-280. ISSN: 1660-9336.
    Detail | WWW

    ŽLEBEK, T.; HODUL, J.; DROCHYTKA, R. Repairing composite using hazardous waste containing heavy metals. In Construmat 2018. IOP Conference Series: Materials Science and Engineering. United Kingdom: IOP Publishing, 2018. p. 1-6. ISSN: 1757-8981.
    Detail | WWW | Full text in the Digital Library

  • 2017

    HODUL, J.; ŽLEBEK, T.; DROCHYTKA, R.; SEJÁK, F. Prověření vhodnosti využití druhotných surovin jako plniv do polymerních antibakteriálních nátěrů na epoxidové bázi pro hygienicky čisté provozy. In CONSTRUMAT 2017 - International Conference on Structural Materials. Ing. Zuzana Štefunková, PhD. Bratislava: Slovenská technická univerzita v Bratislave, Vydavateľstvo Spektrum STU 2017, 2017. p. 160-166. ISBN: 978-80-227-4689- 2.
    Detail

    HODUL, J.; ŽLEBEK, T.; DROCHYTKA, R. Experimental testing suitability of the waste glass into the polymer anchor materials based on epoxy resin. In 18th International Conference on Rehabilitation and Reconstruction of Building 2016. Procedia Engineering. Nizozemsko: 2017. p. 220-227. ISBN: 9788002027010. ISSN: 1877-7058.
    Detail

    ŽLEBEK, T.; HODUL, J.; DROCHYTKA, R. Možnosti využití odpadního skla do polymerních chemických kotev. In CONSTRUMAT 2017 - International Conference on Structural Materials. Ing. Zuzana Štefunková, PhD. Bratislava: Slovenská technická univerzita v Bratislave, Vydavateľstvo Spektrum STU 2017, 2017. p. 226-233. ISBN: 978-80-227-4689- 2.
    Detail

*) Publications are generated once a 24 hours.