Publikace

• 2023

  SLÁDEK, J.; SLÁDEK, V.; HRYTSYNA, M.; PROFANT, T. Influence of flexoelectricity on interface crack problems under a dynamic load. Engineering Fracture Mechanics, 2023, roč. 288, č. 4.8.2023, s. 109353-109353. ISSN: 0013-7944.
  Detail | WWW

  HRSTKA, M.; KOTOUL, M.; PROFANT, T. Analysis of effect of domain polarization switching near sharp piezoelectric bi-material notches. In 20th International Conference on Fracture and Damage Mechanics, DM 2022. AIP conference proceedings. AIP Conference Proceedings. Melville, NY, USA: American Institute of Physics Inc., 2023. s. 020004-1 (020004-17 s.)ISBN: 9780735445482. ISSN: 0094-243X.
  Detail | WWW

  PROFANT, T.; SLÁDEK, J.; SLÁDEK, V. Asymptotic solutions for interface cracks between two dissimilar flexoelectric materials. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2023, č. 22.6.2023, s. 112194-112194. ISSN: 1537-6494.
  Detail | WWW

  SLÁDEK, J.; SLÁDEK, V.; HRYTSYNA, M.; PROFANT, T. Influence of flexoelectricity on an interface crack between two dissimilar dielectric materials. In 23rd European Conference on Fracture, ECF 2022. Procedia Structural Integrity. Procedia Structural Integrity. Elsevier B.V., 2023. s. 1584-1590. ISBN: 9781713870302. ISSN: 2452-3216.
  Detail | WWW | Plný text v Digitální knihovně

  PROFANT, T.; SLÁDEK, J.; SLÁDEK, V. The flexoelectric effect for interface cracks between two dissimilar materials. In Advanced Topics in Mechanics of Materials, Structures and Construction AToMech1-2023. Materials Research Proceedings. Materials Research Proceedings. Millersville, PA: Materials Research Forum LLC, 2023. s. 99-108. ISBN: 9781644902585. ISSN: 2474-3941.
  Detail | WWW

  PROFANT, T.; SLÁDEK, J.; SLÁDEK, V.; KOTOUL, M. Assessment of amplitude factors of asymptotic expansion at crack tip in flexoelectric solid under mode I and II loadings. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2023, roč. 269, č. 1.5.2023, s. 112194-112194. ISSN: 1879-2146.
  Detail | WWW

• 2022

  SLÁDEK, J.; SLÁDEK, V.; HRYTSYNA, M.; PROFANT, T. Application of the gradient theory to interface crack between two dissimilar dielectric materials. Engineering Fracture Mechanics, 2022, roč. 276, č. B, s. 108895-108895. ISSN: 0013-7944.
  Detail | WWW

  PROFANT, T.; SLÁDEK, J.; SLÁDEK, V.; KOTOUL, M. Asymptotic solution for interface crack between two materials governed by dipolar gradient elasticity: Amplitude factor evaluation. Theoretical and Applied Fracture Mechanics, 2022, roč. 120, č. 8, s. 103378-103378. ISSN: 0167-8442.
  Detail | WWW

• 2020

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T.; HRSTKA, M. Crack kinking out of interface of two orthotropic materials under combined thermal/mechanical loading. Theoretical and Applied Fracture Mechanics, 2020, roč. 105, č. 1, s. 1-18. ISSN: 0167-8442.
  Detail | WWW

  KOTOUL, M.; SKALKA, P.; PROFANT, T.; ŘEHÁK, P.; ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. A novel multiscale approach to brittle fracture of nano/micro-sized components. Fatigue & Fracture of Engineering Materials & Structures, 2020, roč. 43, č. 8, s. 1630-1645. ISSN: 8756-758X.
  Detail | WWW

• 2019

  PROFANT, T.; POKLUDA, J. The ab-initio aided strain gradient elasticity theory: a new concept for fracture nanomechanics. Frattura ed Integrita Strutturale, 2019, č. 49, s. 107-114. ISSN: 1971-8993.
  Detail | WWW

  PROFANT, T.; HRSTKA, M.; KLUSÁK, J. An asymptotic analysis of crack initiation from an interfacial zone surrounding the circular inclusion. COMPOSITE STRUCTURES, 2019, roč. 208, č. 1, s. 479-497. ISSN: 0263-8223.
  Detail | WWW

  PROFANT, T.; HRSTKA, M.; KLUSÁK, J. Microcrack interaction with circular inclusion and interfacial zone. Frattura ed Integrita Strutturale, 2019, roč. 13, č. 48, s. 503-512. ISSN: 1971-8993.
  Detail | WWW | Plný text v Digitální knihovně

  HRSTKA, M.; KOTOUL, M.; PROFANT, T. Notch Tip Singularities of Elastic Piezoelectric Bi-materials. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. Procedia Structural Integrity, 2019. s. 419-424. ISSN: 2452-3216.
  Detail | WWW

  KOTOUL, M.; SKALKA, P.; PROFANT, T.; FRIÁK, M.; ŘEHÁK, P.; ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Ab Initio Aided Strain Gradient Elasticity Theory in Prediction of Nanocomponent Fracture. Mechanics of Materials, 2019, roč. 136, č. 9, s. 103074-1 (103074-10 s.)ISSN: 0167-6636.
  Detail | WWW

  HRSTKA, M.; PROFANT, T.; KOTOUL, M. Electro-mechanical singularities of piezoelectric bi-material notches and cracks. Engineering Fracture Mechanics, 2019, roč. 216, č. 1, s. 1-23. ISSN: 0013-7944.
  Detail | WWW

  KLUSÁK, J.; KREPL, O.; PROFANT, T. An easy and engineering stability criterion of general singular stress concentrators. Theoretical and Applied Fracture Mechanics, 2019, roč. 104, č. 1, s. 102341-102352. ISSN: 0167-8442.
  Detail | WWW

• 2018

  KOTOUL, M.; PROFANT, T. Asymptotic solution for interface crack between two materials governed by dipolar gradient elasticity. Engineering Fracture Mechanics, 2018, roč. 201, č. 1, s. 80-106. ISSN: 0013-7944.
  Detail | WWW

  KOTOUL, M.; SKALKA, P.; PROFANT, T.; ŘEHÁK, P.; ŠESTÁK, P.; FRIÁK, M. Prediction of the Critical Energy Release Rate of Nanostructured Solids using the Laplacian Version of the Strain Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (CD). Scientific Net, 2018. s. 447-452. ISSN: 1662-9809.
  Detail

• 2017

  PROFANT, T.; HRSTKA, M.; KLUSÁK, J.; KERŠNER, Z. On the Energy Release Rate of the Crack Emanating from the Inclusion Interphase. In ENGINEERING MECHANICS 2017. Engineering mechanics 2014. Dolejškova 5, Prague 8, 182 00, Czech Republic: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, 2017. s. 806-809. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
  Detail | WWW

• 2016

  KLUSÁK, J.; KREPL, O.; PROFANT, T. Behaviour of a crack in a corner or at a tip of a polygon-like particle. In Procedia Structural Integrity. Procedia Structural Integrity. Elsevier, 2016. s. 1912-1919. ISSN: 2452-3216.
  Detail | WWW | Plný text v Digitální knihovně

  KOTOUL, M.; PROFANT, T.; PADĚLEK, P. Plane Asymptotic Interface Crack Solutions in Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics XV. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2016. s. 151-154. ISBN: 978-3-03835-716-2. ISSN: 1013-9826.
  Detail | WWW

  O. Krepl, J. Klusák, T. Profant. Analytical-numerical determination of stress distribution around a tip of polygon-like inclusion. Key Engineering Materials (web), 2016, roč. 1, č. 713, s. 94-98. ISSN: 1662-9795.
  Detail

• 2015

  ŠEVEČEK, O.; LEGUILLON, D.; PROFANT, T.; KOTOUL, M. Validity of the Finite Fracture Mechanics based Asymptotic Analysis for Predictions of Crack Deflection in Thin Layers of Ceramic Laminates. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2015. s. 237-240. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.
  Detail

• 2014

  KLUSÁK, J.; HRSTKA, M.; PROFANT, T.; KREPL, O.; ŠEVEČEK, O.; KOTOUL, M. The influence of the first non-singular stress terms on crack initiation direction in an orthotropic bi-material plate. Theoretical and Applied Fracture Mechanics, 2014, roč. 71, č. 2014, s. 67-75. ISSN: 0167-8442.
  Detail

  PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M.; HRSTKA, M.; MARCIÁN, P. An effect of the first non-singular term of the Williams asymptotic expansion to the stability of the bi- material orthotropic notch. In Materials Structure & Micromechanics of Fracture VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. s. 745-748. ISSN: 1013-9826.
  Detail

  ŠEVEČEK, O.; BERMEJO, R.; PROFANT, T.; KOTOUL, M. Influence of the T-stress on the crack bifurcation phenomenon in ceramic laminates. In 20th European Conference on Fracture (ECF 2014). Procedia Materials Science. Procedia Materials Science Volume 3. Trondheim, Norsko: Elsevier, 2014. s. 1062-1067. ISBN: 9781632669094. ISSN: 2211-8128.
  Detail

  KREPL, O.; KLUSÁK, J.; PROFANT, T.; HRSTKA, M. Stress distribution and fracture parameters of orthotropic bi-material notches determination. 2014.
  Detail

  HRSTKA, M.; PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. A Stability Criterion of an Orthotropic Bi-Material Notch Based on the Strain Energy Density. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. s. 232-235. ISBN: 978-80-214-4871-1.
  Detail

  DAMBORSKÝ, P.; ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Criterion for crack kinking out of the interface of two orthotropic layers subjected to thermal and mechanical loading. In Materials Structure and Micromechanics of Fracture VII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2014. s. 169-172. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
  Detail

  DAMBORSKÝ, P.; ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Crack Deflection from the Interface between Two Orthotropic Materials-Effect of Higher Order Terms in Asymptotic Analysis. In Advances in Fracture and Damage Mechanics XII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2014. s. 157-160. ISBN: 978-3-03785-830-1. ISSN: 1013-9826.
  Detail

  KLUSÁK, J.; KOPP, D.; PROFANT, T. Bi-material notches under various normal- shear loading modes. Key Engineering Materials (print), 2014, roč. 577- 578, č. 1, s. 361-364. ISSN: 1013- 9826.
  Detail

  MARCIÁN, P.; VALÁŠEK, J.; HRSTKA, M.; MAJER, Z.; ŠEVEČEK, O.; PROFANT, T.; DLOUHÝ, I.; FLORIAN, Z. Computational Modeling of Porous Ceramics with Bioactive Layer. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. s. 378-381. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
  Detail

• 2013

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T.; BERMEJO, R. Influence of the residual stresses on the crack deflection in ceramic laminates. 2013.
  Detail

  PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non-uniform fracture mechanics On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non- uniform fracture mechanics properties. Key Engineering Materials (print), 2013, roč. 525- 526, č. 1, s. 545-548. ISSN: 1013- 9826.
  Detail

  PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; HRSTKA, M.; KOTOUL, M. An energetic criterion for a micro-crack of finite length initiated in orthotropic bi- material notches. Engineering Fracture Mechanics, 2013, roč. 110, č. 2013, s. 396-409. ISSN: 0013- 7944.
  Detail

  KLUSÁK, J.; PROFANT, T.; KNÉSL, Z.; KOTOUL, M. The influence of discontinuity and orthotropy of fracture toughness on conditions of fracture initiation in singular stress concentrators. Engineering Fracture Mechanics, 2013, roč. 110, č. 2013, s. 438-447. ISSN: 0013- 7944.
  Detail

• 2012

  KLUSÁK, J.; PROFANT, T.; KOTOUL, M. Conditions for crack initiation in an orthotropic bi- material notch. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2012, roč. 2012 (19), č. 4, s. 302-307. ISSN: 1537- 6494.
  Detail

  KOTOUL, M.; ŠEVEČEK, O.; PROFANT, T. Modelling of Crack Bifurcation in Laminar Ceramics with Large Compressive Stress. Key Engineering Materials (print), 2012, roč. 488- 489, č. 2012, s. 130-133. ISSN: 1013- 9826.
  Detail

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T. Effect of higher order asymptotic terms on the competition between crack penetration and debond at a bimaterial interface between aligned orthotropic materials. Engineering Fracture Mechanics, 2012, roč. 80, č. 1, s. 28-51. ISSN: 0013- 7944.
  Detail

  KLUSÁK, J.; PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. Crack propagation from bi-material notches - matched asymptotic procedure. Key Engineering Materials (print), 2012, roč. 488- 489, č. 2012, s. 416-419. ISSN: 1013- 9826.
  Detail

• 2011

  DAMBORSKÝ, P.; PROFANT, T.; KOTOUL, M. STRESS SINGULARITY ANALYSIS OF CRACKS LYING ON THE INTERFACE BETWEEN TWO ORTHOTROPIC MATERIALS. In ENGINEERING MECHANICS. 1. Prague: Institute of Thermomechanics - Academy of Sciences of the Czech Republic - Prague, 2011. s. 103-107. ISBN: 978-80-87012-33- 8.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. THE ANALYSIS OF THE CRACK INITIATED FROM THE ORTHOTROPIC BI- MATERIAL SHARP NOTCH. In ENGINEERING MECHANICS. 1. Prague: Institute of Thermomechanics - Academy of Sciences of the Czech Republic - Prague, 2011. s. 103-107. ISBN: 978-80-87012-33- 8.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. Case Criterion of Crack Onset in Orthotropic Bi- Material Notches. Key Engineering Materials, 2011, roč. 465, č. 1, s. 157-160. ISSN: 1013- 9826.
  Detail

  KLUSÁK, J.; KNÉSL, Z.; PROFANT, T. The influence of discontinuity of fracture-mechanics parameters on the failure manner of multi- material structures. In Proceedings of Computational Modeling of Fracture and Failure of Materials and Structures. 1. Barcelona, Španělsko: cimne, 2011. s. 1-4. ISBN: 978-84-87867-66- 8.
  Detail

• 2010

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. CONDITIONS FOR CRACK INITIATION IN AN ORTHOTROPIC BI- MATERIAL CORNER DETERMINED BY MEANS OF THE STRAIN ENERGY DENSITY FACTOR. In Multiscaling of Synthetic and Natural Systems with Self- Adaptive Capability. Taipei: National Taiwan University of Science and Technology, 2010. s. 149-152. ISBN: 978-986-02-3909- 6.
  Detail

  KLUSÁK, J.; PROFANT, T.; KOTOUL, M. Determination of the threshold values of orthotropic bi- material notches. Procedia Engineering, 2010, roč. 2, č. 1, s. 1635-1642. ISSN: 1877- 7058.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. On the crack initiated from the bi- material notch tip. Key Engineering Materials, 2010, roč. 452- 453, č. 1, s. 441-444. ISSN: 1013- 9826.
  Detail

  DAMBORSKÝ, P.; PROFANT, T. Použití explicitní L.E.S. metody pro řešení singulárního problému trhliny ležící na rozhraní dvou ortotropních materiálů. Brno: VUT v Brně, 2010. s. 85-103. ISBN: 978-80-87434-02- 4.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M. A study of the stability of sharp notches in the orthotropic heterogeneous media. In The Ninth International Conference on Multiaxial Fatigue & Fracture (ICMFF9). 2010. s. 733-740. ISBN: 978-88-95940-31- 1.
  Detail

• 2009

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KLUSÁK, J. Computational model of the transition of crack across the sharp material interface. In 12th International Conference on Fracture. 2009. s. 1-10. ISBN: 9781617382277.
  Detail

  KLUSÁK, J.; PROFANT, T.; KOTOUL, M. Study of stress distribution around an orthotropic bi- material notch tip. Key Engineering Materials (print), 2009, roč. 417- 418, č. 1, s. 385-388. ISSN: 1013- 9826.
  Detail

  PROFANT, T.; KLUSÁK, J.; KOTOUL, M.; KNÉSL, Z. Application of the generalized linear elastic fracture mechanics to NiTi catheter. Brazílie: SBPMat, 2009. s. 1 (1 s.).
  Detail

  KOTOUL, M.; ŠEVEČEK, O.; PROFANT, T. Analysis of multiple cracks in thin coating on orthotropic substrate under mechanical and residual stresses. Engineering Fracture Mechanics, 2009, roč. 77, č. 2, s. 229-248. ISSN: 0013- 7944.
  Detail

• 2008

  PROFANT, T.; KOTOUL, M.; ŠEVEČEK, O. Stronger and weaker singularity of an inclined crack terminating at the orthotropic bimaterial interface. In 17th European conference on fracture. Brno: VITIUM, 2008. s. 170-170. ISBN: 9781617823190.
  Detail

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O. Analysis of Multiple Cracks in Thin Coating on Orthotropic Substrate. In Multilevel Approach to Fracture of Materials, Components and Structures. 1. Czech Republic: VUTIUM Brno, 2008. s. 170-177. ISBN: 9781617823190.
  Detail

  KLUSÁK, J.; PROFANT, T.; KOTOUL, M. A comparison of two direct methods of generalized stress intesity factor calculations of bi- material notches. Key Engineering Materials (print), 2008, roč. 385, č. 1, s. 409-412. ISSN: 1013- 9826.
  Detail

  PROFANT, T.; KOTOUL, M. On the inclined surface crack terminating at the orthotropic bimaterial interface. Key Engineering Materials, 2008, roč. 385, č. 1, s. 541-544. ISSN: 1013- 9826.
  Detail

• 2007

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. The Analysis of the Stress and Displacement Field Near the Surface Crack Tip Terminating Perpendicular to the Interface Between Two Orthotropic Materials. Materials Science Forum, 2007, roč. 567, č. 1, s. 137-140. ISSN: 0255- 5476.
  Detail

  ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Crack propagation criteria for the crack terminating on the interface of a thin orthotropic layer and an orthotropic substrate. In Engineering Mechanics 2007. Prague: Institute of thermomechanics Academy of science of the Czech Republic, 2007. s. 271-272. ISBN: 978-80-87012-06- 2.
  Detail

  ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Řešení problému přemostění trhliny v tenké ortotropní vrstvě s vrcholem na rozhraní ortotropního substrátu. In Applied Mechanics 2007. Ediční středisko VŠB. Ostrava: VŠB Technická universita Ostrava, 2007. s. 207-208. ISBN: 978-80-248-1389- 9.
  Detail

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. Calculation of k-factor and t- stress for cracks in anisotropic bimaterials. Engineering Fracture Mechanics, 2007, roč. 75, č. 11, s. 3707-3726. ISSN: 0013- 7944.
  Detail

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M.; VYSLOUŽIL, T. Dislocation tri-material solution in the analysis of bridged crack in anisotropic bimaterial half- space. INTERNATIONAL JOURNAL OF FRACTURE, 2007, roč. 147, č. 4, s. 199-217. ISSN: 0376- 9429.
  Detail

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KREJČÍŘ, M. Solution methods for general stress concentrators in anisotropic heterogeneous media. Key Engineering Materials (print), 2007, roč. 348- 349, č. 1, s. 677-680. ISSN: 1013- 9826.
  Detail

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KREJČÍŘ, M. a kol. Modeling of cracks crossing an interface between dissimilar elastic anisotropic materials. Materials Science Forum, 2007, roč. 567, č. 1, s. 17-22. ISSN: 0255- 5476.
  Detail

• 2006

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. STRESS SINGULARITY AT AN SEMI- INFINITE CRACK PERPENDICULAR TO THE INTERFACE BETWEEN TWO ORTHOTROPIC MATERIALS. In Dynamika tuhých a deformovatelných těles 2006. Ústí nad Labmem: Univerzita J.E. Purkyně, 2006. s. 175-182. ISBN: 80-7044-782- 6.
  Detail

  ŠEVEČEK, O.; PROFANT, T. Problematika obecných koncentrátorů na rozhraní dvou anisotropních materiálů. In Víceúrovňový design pokrokových materiálů 2005. Brno: Ústav fyziky materiálů AVČR, 2006. s. 155-162. ISBN: 80-239-8271- 0.
  Detail

  ŠEVEČEK, O.; PROFANT, T.; KOTOUL, M. Problematika přechodu trhlin přes rozhraní dvou anisotropních materiálů. In Computational mechanics 2006. Nečtiny: University of West Bohemia, 2006. s. 601-608. ISBN: 80-7043-477- 5.
  Detail

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T. Konstrukce fundamentálního řešení pro dislokaci v anisotropním bimateriálovém tělese pomocí MKP. In Engineering mechanics 2006. Svratka: 2006. s. 350-351. ISBN: 80-86246-27- 2.
  Detail

  ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T. Výpočet zobecněného součinitele intensity napětí pro trhlinu kolmou na rozhraní dvou anisotropních materiálů. In Aplikovaná mechanika 2006. Srní: 2006. s. 93-94. ISBN: 80-7043-441- 4.
  Detail

  PROFANT, T.; KOTOUL, M.; ŠEVEČEK, O. Analysis of Edge Bridged Crack in Bimaterial Anisotropic Half- Space. Key Engineering Materials (print), 2006, roč. 324, č. 9, s. 1143-1143. ISSN: 1013- 9826.
  Detail

  KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O. Calculation of K-factor and T- stress for crack at anisotropic bimaterials. In Fracture of Nano and Engineering Materials and Structures. Holandsko: Springer, 2006. s. 879-879. ISBN: 1-4020-4971- 4.
  Detail

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. Stress field analisys near the semi- infinite crack tip terminating to the interface between two orthotropic materials. In Engineering Mechanics 2006. první. Svratka: Academy of Sciences of the Czech Republic, Prague, 2006. s. 304-305. ISBN: 80-86246-27- 2.
  Detail

  PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. ANALÝZA SINGULARITY NAPĚTÍ U TRHLIN NA ROZHRANÍ DVOU ORTOTROPNÍCH MATERIÁLŮ. In Computational Mechanics. Hrad Nečtiny: University of West Bohemia in Pilsen, 2006. s. 483-490. ISBN: 80-7043-477- 5.
  Detail

• 2005

  PROFANT, T.; KOTOUL, M. Effect of thermal expansion mismatches of matrix and fibres on microcracking of brittle matrix composites. In Aplikovaná mechanika 2005. Brno: ÚMTMB FSI v Brně, 2005. s. 85-86. ISBN: 80-214-2373- 0.
  Detail

  PROFANT, T., KOTOUL, M. On crack path in fibres- reinforced ceramic composites. Materials Science Forum, 2005, roč. 482, č. 3, s. 299 ( s.)ISSN: 0255- 5476.
  Detail

  T.PROFANT, M. KOTOUL. On collinear microcrack- inclusion arrays interaction and related problems. Theoretical and Applied Fracture Mechanics, 2005, roč. 44, č. 11, s. 297 ( s.)ISSN: 0167- 8442.
  Detail | WWW

• 2004

  PROFANT, T.; KOTOUL, M. Periodická řada kolineárních mikrotrhlin oddělených kruhovými elastickými inkluzemi. Část I. Fundamentální řešení pro dislokaci mezi dvěma inkluzemi. Engineering Mechanics, 2004, roč. 11, č. 3, s. 215-238. ISSN: 1802- 1484.
  Detail

  KOTOUL, M.; PROFANT, T.; VYSLOUŽIL, T. Modely mechanismů pro zvyšování houževnatosti kompozitů s křehkou matricí. In Křehký lom 2004. Brno: Ústav fyziky materiálů AVČR , Brno, 2004. s. 5-29. ISBN: 80-239-3646- 8.
  Detail

  PROFANT, T. The Straight Path Stability of an Array of Collinear Micro- cracks Interacting with an Array of Circular Inclusions. In Inženýrská mechanika- Engineering Mechanics 2004. Praha: Institute of Thermomechanics, ASCR, 2004. s. 243-254. ISBN: 80-85918-88- 9.
  Detail

  PROFANT, T.; KOTOUL, M. Periodická řada kolineárních mikrotrhlin oddělených kruhovými elastickými inkluzemi. Část II. Aplikace techniky spojitě rozdělených dislokací. Engineering Mechanics, 2004, roč. 11, č. 4, s. 259-289. ISSN: 1802- 1484.
  Detail

  PROFANT, T.; KOTOUL, M. Model porušení v kompozitech s křehkou matricí při působení teplotních napětí. In Computational mechanics 2004. Plzen: Západočeská universita, 2004. s. 413-420. ISBN: 80-7043-314- 0.
  Detail

• 2003

  PROFANT, T., KOTOUL, M. Studium interakce řady kolineárních mikrotrhlin s periodickou řadou částic. In Inženýrská mechanika 2003. Praha: Ústav teoretické a aplikované mechaniky AVČR, 2003. s. 278 ( s.)ISBN: 80-86246-18- 3.
  Detail

  PROFANT, T., KOTOUL, M. Study of interaction of an array of collinear microcracks with periodic array of inclusions. Key Engineering Materials (print), 2003, roč. 251, č. 8, s. 279 ( s.)ISSN: 1013- 9826.
  Detail

  PROFANT, T., KOTOUL, M. On the interaction of an array of collinear microcracks with periodic array of inclusions. Key Engineering Materials (print), 2003, roč. 251, č. 8, s. 279 ( s.)ISSN: 1013- 9826.
  Detail

*) Citace publikací se generují jednou za 24 hodin.