Detail projektu

Výpočtové simulace pro efektivní nízkoemisní energetiku

Období řešení: 01.10.2018 — 30.09.2022

Zdroje financování

Evropská unie - OPVVV PO1 Dlouhodobá mezisektorová spolupráce

- plně financující (2018-08-30 - nezadáno)

O projektu

Předložený projekt je zaměřen na rozvoj dlouhodobé spolupráce v oblasti využití výpočtových simulací v energetice mezi výzkumnou organizací FSI VUT v Brně, NETME Centre a partnery z průmyslu (spol. TENZA, a.s., SIGMA Výzkumný a vývojový ústav, s.r.o., ČKD Blansko Engineering, a.s.) a komunálních služeb (Teplárny Brno, a.s.). Předmětem projektu a spolupráce je vývoj simulačních modelů a metodických postupů pro aplikaci výpočtových simulací v různých oblastech energetiky. Hlavní aktivity projektu budou směřovat do vývoje inovativních simulačních modelů a postupů umožňujících zvyšování efektivity a snižování dopadů na životní prostředí v oblasti výroby, distribuce a spotřeby energie. Projekt reaguje na aktuální společenskou výzvu dlouhodobě zajistit dostatečné množství energie umožňující neklesající životní úroveň, čisté životní prostředí a ceny energií zajišťující konkurenceschopnost ekonomiky. Výpočtové simulace představují hlavní nástroj umožňující úspěšně naplnit požadavky moderní energetiky. Další rozvoj výpočtových simulací je rozhodujícím faktorem pro zajištění technického pokroku v celém energetickém sektoru. Projekt má svým zaměřením a naplánovanými aktivitami prokazatelný potenciál k zintenzivnění mezisektorové spolupráce a podpoře obousměrného přenosu jedinečných znalostí a zkušeností mezi jednotlivými partnery projektu. Výstupy projektu a jejich budoucí uplatnění v praxi povedou ke zvýšení kvality života a zejména k omezování negativních vlivů na životní prostředí. Předkládaný projekt je v souladu s Národní RIS3 strategií (zejména v doméně Pokročilé výrobní technologie). Veškeré výzkumné aktivity spadají do kategorií TRL 1 až TRL 3.

Popis anglicky
Objective of the project Computer Simulations for Effective Low-Emission Energy Engineering is to promote long-term cooperation between NETME Centre at the FME, BUT, a research organization, industry partners and municipal services. Subject-matter of the project and the cooperation is to develop simulation models and methodological procedures for application of computational models in various areas of power industry. Special focus is on wide spectrum of technical issues, starting with simulation of physical phenomena (for example, combustion and multiphase streaming) to simulation of large power systems (for example, heat networks). Computational simulations have undergone a massive development within the last 20 years and represent an efficient tool for increasing efficiency of power equipment and decreasing environmental impact of power industry.

Klíčová slova
modelování, výpočtové simulace, energetické systémy, energetická účinnost, přeměny energie, ukládání energie, proudění tekutin, emise, aplikační sféra, komunální sféra

Klíčová slova anglicky
modeling, energy storage, computational simulations, fluid flow, energy systems, emissions, energy efficiency, energy conversion

Označení

CZ.02.1.01/0.0/0.0/16_026/0008392

Originální jazyk

čeština

Řešitelé

Útvary

Centrum nových technologií ve strojírenství
- příjemce (01.10.2018 - 30.09.2022)
ČKD Blansko Engineering, a.s.
- spolupříjemce (01.10.2018 - 30.09.2022)
SIGMA Výzkumný a vývojový ústav, s.r.o.
- spolupříjemce (01.10.2018 - 30.09.2022)
Tenza, a.s.
- spolupříjemce (01.10.2018 - 30.09.2022)
Teplárny Brno, a.s.
- spolupříjemce (01.10.2018 - 30.09.2022)

Výsledky

KŮDELA, J.; POPELA, P. Chance constrained optimal beam design: convex reformulation and probabilistic robust design. Kybernetika, 2018, vol. 54, no. 6, p. 1201-1217. ISSN: 0023-5954.
Detail

POLÁČIK, J.; ŠNAJDÁREK, L.; ŠPILÁČEK, M.; POSPÍŠIL, J.; SITEK, T. Particulate Matter Produced by Micro-Scale Biomass Combustion in an Oxygen-Lean Atmosphere. ENERGIES, 2018, vol. 11, no. 12, p. 1-10. ISSN: 1996-1073.
Detail

MALÝ, M.; SLÁMA, J.; SAPÍK, M.; JEDELSKÝ, J. 2D and 3D numerical modelling of internal flow of Pressure-swirl atomizer. In EFM18 – Experimental Fluid Mechanics 2018. EPJ Web of Conferences. EDP Sciences, 2019. p. 1-6. ISSN: 2100-014X.
Detail

SAPÍK, M.; MALÝ, M.; JEDELSKÝ, J.; WIGLEY, G.; CEJPEK, O. Selection of model liquid with refractive index matching for visualization of internal flow in a scaled atomizer model. In EXPERIMENTAL FLUID MECHANICS 2018 (EFM18). EPJ Web of Conferences. EDP Sciences, 2019. p. 1-6. ISSN: 2100-014X.
Detail

POSPÍŠIL, J.; JÍCHA, M. Numerical modelling of transient dispersion of air pollution in perpendicular urban street intersection with detail inclusion of traffic dynamics. International journal of environment and pollution, 2019, vol. 65, no. 1/2/3, p. 71-83. ISSN: 0957-4352.
Detail

KUDELA, L.; CHÝLEK, R.; POSPÍŠIL, J. Performant and Simple Numerical Modeling of District Heating Pipes with Heat Accumulation. ENERGIES, 2019, vol. 12, no. 4, p. 1-23. ISSN: 1996-1073.
Detail

MÁLEK, M.; ŠOMPLÁK, R.; POPELA, P.; KŮDELA, J. Stochastic Integer Waste Management Problem Solved by a Modified Progressive Hedging Algorithm. Mendel Journal series, 2018, vol. 24, no. 2, p. 17-22. ISSN: 1803-3814.
Detail

SITEK, T.; POSPÍŠIL, J.; POLÁČIK, J.; ŠPILÁČEK, M.; VARBANOV, P. Fine combustion particles released during combustion of unit mass of beechwood. RENEWABLE ENERGY, 2019, vol. 140, no. 1, p. 390-396. ISSN: 0960-1481.
Detail

CHARVÁT, P.; KLIMEŠ, L.; ZÁLEŠÁK, M. Utilization of an Air-PCM Heat Exchanger in Passive Cooling of Buildings: A Simulation Study on the Energy Saving Potential in Different European Climates. ENERGIES, 2019, vol. 12, no. 6, p. 1-17. ISSN: 1996-1073.
Detail

BULEJKO, P.; ONDRÁČEK, J.; DOHNAL, M. Air Filtration Using Hollow-Fiber Membranes: A Comparison of Theoretical Models for the Most Penetrating Particle Size and Dimensionless Permeability with Experimental Data. AFS Filtcon, April 1-3 2019, Philadelphia-Cherry Hill, USA, 2019. p. 1-11.
Detail

MALÝ, M.; SAPÍK, M.; CEJPEK, O.; WIGLEY, G.; KATOLICKÝ, J.; JEDELSKÝ, J. Effect of spill orifice geometry on spray and control characteristics of spill-return pressure-swirl atomizers. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2019, vol. 106, no. 1, p. 159-170. ISSN: 0894-1777.
Detail

CHARVÁT, P.; KLIMEŠ, L.; PECH, O.; HEJČÍK, J. Solar air collector with the solar absorber plate containing a PCM – Environmental chamber experiments and computer simulations. RENEWABLE ENERGY, 2019, vol. 143, no. 1, p. 731-740. ISSN: 0960-1481.
Detail

ELCNER, J.; LÍZAL, F.; JEDELSKÝ, J.; TUHOVČÁK, J.; JÍCHA, M. Laminar-turbulent transition in a constricted tube: Comparison of Reynolds-averaged Navier–Stokes turbulence models and large eddy simulation with experiments. Advances in Mechanical Engineering, 2019, vol. 11, no. 5, p. 1-17. ISSN: 1687-8140.
Detail

KLIMEŠ, L.; POSPÍŠIL, J.; ŠTĚTINA, J.; KRACÍK, P. Semi-empirical balance-based computational model of air-cooled condensers with the A-frame layout. Energy, 2019, vol. 182, no. 1, p. 1013-1027. ISSN: 0360-5442.
Detail

BOBČÍK, M. New Trends in Transonic and Supersonic Tip Profile of Ultra Long Rotor Turbine Blades. AIP Conference Proceedings. AIP Conference Proceedings. 2019. p. 1-16. ISSN: 1551-7616.
Detail

KŮDELA, J.; ŠOMPLÁK, R.; NEVRLÝ, V.; LIPOVSKÝ, T.; SMEJKALOVÁ, V.; DOBROVSKÝ, L. Multi-objective strategic waste transfer station planning. Journal of Cleaner Production, 2019, vol. 230, no. 1 September, p. 1294-1304. ISSN: 0959-6526.
Detail

HRABEC, D.; KŮDELA, J.; ŠOMPLÁK, R.; NEVRLÝ, V.; POPELA, P. Circular economy implementation in waste management network design problem: a case study. Central European Journal of Operations Research, 2019, vol. 1, no. 1, p. 1-18. ISSN: 1435-246X.
Detail

CEJPEK, O.; MALÝ, M.; KOCHED, A.; SAPÍK, M.; LÍZAL, F.; JEDELSKÝ, J. Suitability of Volumetric 3-Component Velocimetry Method for Measurement of Pressure Swirl Sprays. In Topical Problems of Fluid Mechanics. Topical Problems of Fluid Mechanics 2019. Praha: 2019. p. 37-44. ISSN: 2336-5781.
Detail

TOMAN, F.; KRACÍK, P.; POSPÍŠIL, J. INFLUENCE OF SHEAR STRESS ON THE LIQUID FILM FLOW IN VERTICAL TUBE. 13th International Conference for Young Researchers and PhD Students, Proceedings of the abstracts. 1. Brno: Brno University of Technology, Faculty of Mechanical Engineering, 2019. p. 56-56. ISBN: 978-80-214-5733-1.
Detail

ČUPR, P.; ŠTEFAN, D.; HABÁN, V.; RUDOLF, P. FSI analysis of francis-99 hydrofoil employing SBES model to adequately predict vortex shedding. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. IOP, 2019. p. 1-14. ISSN: 1742-6596.
Detail

BULEJKO, P.; KRIŠTOF, O.; DOHNAL, M.; SVĚRÁK, T. Fine/ultrafine particle air filtration and aerosol loading of hollow-fiber membranes: A comparison of mathematical models for the most penetrating particle size and dimensionless permeability with experimental data. JOURNAL OF MEMBRANE SCIENCE, 2019, vol. 592, no. 117393, p. 1-11. ISSN: 0376-7388.
Detail

CHÝLEK, R.; KUDELA, L.; POSPÍŠIL, J.; ŠNAJDÁREK, L. Fine particle emission during fused deposition modelling and thermogravimetric analysis for various filaments. Journal of Cleaner Production, 2019, vol. 237, no. 117790, p. 1-10. ISSN: 0959-6526.
Detail

POSPÍŠIL, J.; ŠPILÁČEK, M.; CHARVÁT, P. Seasonal COP of an Air-to-Water Heat Pump when Using Predictive Control Preferring Power Production from Renewable Sources in the Czech Republic. ENERGIES, 2019, vol. 12, no. 17, p. 1-13. ISSN: 1996-1073.
Detail

ŠOMPLÁK, R.; KŮDELA, J.; SMEJKALOVÁ, V.; NEVRLÝ, V.; HRABEC, D.; PAVLAS, M. Pricing and Advertising Strategies in Conceptual Waste Management Planning. Journal of Cleaner Production, 2019, vol. 239, no. 1, p. 118068.1-118068.12. ISSN: 0959-6526.
Detail

DARDIR, M.; EL MANKIBI, M.; HAGHIGHAT F.; KLIMEŠ, L. Development of PCM-to-air heat exchanger for integration in building envelope–modeling and validation. SOLAR ENERGY, 2019, vol. 190, no. 1, p. 367-385. ISSN: 0038-092X.
Detail

BOHÁČEK, J.; RAUDENSKÝ, M.; KROULÍKOVÁ, T.; KARIMI-SIBAKI, E. Polymeric hollow fibers: A supercompact cooling of Li-ion cells. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, vol. 146, no. 1, p. 1-12. ISSN: 1290-0729.
Detail

ČUPR, P.; RUDOLF, P.; HABÁN, V. Numerical investigation of added mass and damping effects on a hydrofoil in cavitation tunnel. WASSERWIRTSCHAFT, 2019, vol. 109, no. 1, p. 6-11. ISSN: 0043-0978.
Detail

MALÝ, M.; SAPÍK, M.; CEJPEK, O.; LÍZAL, F.; ONDRÁČEK, V.; JÍCHA, M.; JEDELSKÝ, J. Internal flow characteristics in Spill-return pressure-swirl atomizers. Paříž: ILASS, 2019. p. 1-8.
Detail

CEJPEK, O.; JEDELSKÝ, J.; MALÝ, M.; SAPÍK, M.; LÍZAL, F.; KOCHED, A. Investigation of pressure swirl sprays using Volumetric PIV. Paříž: ILASS, 2019. p. 1-8.
Detail

JEDELSKÝ, J.; MALÝ, M.; ALOUSQUE, L.; WIGLEY, G.; CEJPEK, O.; LÍZAL, F. Characteristics of liquid sheet break up for spill-return swirl atomizers with different spill-line designs. Paříž: 2019. p. 1 (1 s.).
Detail

TOMAN, F.; KRACÍK, P.; POSPÍŠIL, J.; ŠPILÁČEK, M. Comparison of Different Concepts of Condensation Heat Exchangers With Vertically Oriented Pipes for Effective Heat and Water Regeneration. Chemical Engineering Transactions, 2019, vol. 2019, no. 76, p. 379-384. ISSN: 2283-9216.
Detail

HRABEC, D.; SENLAND, P.; NEVRLÝ, V.; POPELA, P.; HOFF, A.; ŠOMPLÁK, R.; PAVLAS, M. Quantity-Predictive Vehicle Routing Problem for Smart Waste Collection. Chemical Engineering Transactions, 2019, vol. 76, no. 1, p. 1249-1254. ISSN: 2283-9216.
Detail

Marcel Sapík, Jan Jedelský, Edouard Berrocal. Spray visualization using liquid fluorescence high-speed imaging. 2020. p. 1-4.
Detail

KRIŠTOF, O.; BULEJKO, P.; SVĚRÁK, T. Experimental Study on Spray Breakup in Turbulent Atomization Using a Spiral Nozzle. Processes, 2019, vol. 7, no. 12, p. 1-25. ISSN: 2227-9717.
Detail

HIMR, D.; HABÁN, V.; FIALOVÁ, S. Influence of Second Viscosity on Pressure Pulsation. Applied Sciences - Basel, 2019, vol. 9, no. 24, p. 1-12. ISSN: 2076-3417.
Detail

HIMR, D.; HABÁN, V.; ZÁVORKA, D. Axial check valve behaviour during flow reversal. In IOP Conference Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. 2019. p. 1-6. ISSN: 1755-1315.
Detail

CEJPEK, O.; ŠÍP, J.; MALÝ, M.; JEDELSKÝ, J.; TOMÁŠ, Z. Analysis of velocity profile measurements obtained by different methods in low-speed , small-scale wind tunnel. 2020. p. 72-79.
Detail

URBAN, O.; RUDOLF, P. POD analysis of a vortex rope with transient boundary conditions. In IOP Conference Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. 2019. p. 1-6. ISSN: 1755-1315.
Detail

ČUPR, P., WEBER, W., HÜBNER, B. Investigation on the hydrodynamic damping using prescribed blade motion techniques. In IOP Conference Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. 2019. p. 1-6. ISSN: 1755-1315.
Detail

ZAREMBA, M.; MALÝ, M.; MRÁZ V.; JEDELSKÝ, J. Comparison of Fibre-Based Phase Doppler Analysers. 2020. p. 1-9.
Detail

MALAYERI, M.; LEE, C.-S.; HAGHIGHAT, F.; KLIMEŠ, L. Modeling of gas-phase heterogeneous photocatalytic oxidation reactor in the presence of mass transfer limitation and axial dispersion. CHEMICAL ENGINEERING JOURNAL, 2020, vol. 386, no. 1, p. 124013-124013. ISSN: 1385-8947.
Detail

CHARVÁT, P.; ZÁLEŠÁK, M.; KLIMEŠ, L. The Influence of the Phase Change Temperature Range and the Phase Change Hysteresis of a PCM on the Performance of an Air-PCM Heat Storage Unit. In ASME 2019 International Mechanical Engineering Congress and Exposition. Salt Lake City, Utah, USA: ASME, 2019. p. 1-6. ISBN: 978-0-7918-5943-8.
Detail

KLIMEŠ, L.; CHARVÁT, P.; JOYBARI, M. M.; ZÁLEŠÁK, M.; HAGHIGHAT, F.; PANCHABIKESAN, K.; EL MANKIBI, M.; YUAN, Y. Computer modelling and experimental investigation of phase change hysteresis of PCMs: The state-of-the-art review. APPLIED ENERGY, 2020, vol. 263, no. 1, p. 1-29. ISSN: 0306-2619.
Detail

ŠTEFAN, D.; ROSSI, M.; HUDEC, M.; RUDOLF, P.; NIGRO, A.; RENZI, M. Study of the internal flow field in a pump-as-turbine (PaT): Numerical investigation, overall performance prediction model and velocity vector analysis. RENEWABLE ENERGY, 2020, vol. 156, no. 0, p. 158-172. ISSN: 0960-1481.
Detail

POSPÍŠIL, J.; HUZLÍK, J.; LIČBINSKÝ, R.; ŠPILÁČEK, M. Dispersion Characteristics of PM10 Particles Identified by Numerical Simulation in the Vicinity of Roads Passing through Various Types of Urban Areas. Atmosphere, 2020, vol. 11, no. 5, p. 1-15. ISSN: 2073-4433.
Detail

KŮDELA, J.; POPELA, P. Pool & Discard Algorithm for Chance Constrained Optimization Problems. IEEE Access, 2020, vol. 8, no. 1, p. 79397-79407. ISSN: 2169-3536.
Detail

URBÁN, A.; GRONIEWSKI, A.; MALÝ, M.; JÓZSA, V.; JEDELSKÝ, J. Application of big data analysis technique on high-velocity airblast atomization: Searching for optimum probability density function. FUEL, 2020, vol. 273, no. 1, p. 1-12. ISSN: 0016-2361.
Detail

ŠEDIVÝ, D.; FIALOVÁ, S.; KLAS, R.; KOTEK, M. FSI Computation and Experimental Verification of Fluid Flow in Flexible Tubes. Measurement Science Review, 2020, vol. 20, no. 3, p. 104-114. ISSN: 1335-8871.
Detail

CHARVÁT, P.; KLIMEŠ, L.; POSPÍŠIL, J.; KLEMEŠ, J.; VARBANOV, P. An overview of mercury emissions in the energy industry - A step to mercury footprint assessment. Journal of Cleaner Production, 2020, vol. 267, no. 1, p. 1-11. ISSN: 0959-6526.
Detail

HRABEC, D.; ŠOMPLÁK, R.; NEVRLÝ, V.; VIKTORÍN, A.; PLUHÁČEK, M.; POPELA, P. Sustainable waste-to-energy facility location: Influence of demand on energy sales. Energy, 2020, vol. 207, no. 1, p. 1-15. ISSN: 0360-5442.
Detail

TOMAN, F.; KRACÍK, P.; POSPÍŠIL, J.; ŠPILÁČEK, M. Comparison of water vapour condensation in vertically oriented pipes of condensers with internal and external heat rejection. Energy, 2020, vol. 208, no. 118388, p. 1-11. ISSN: 0360-5442.
Detail

KŮDELA, J.; SMEJKALOVÁ, V.; ŠOMPLÁK, R.; NEVRLÝ, V. Legislation-induced planning of waste processing infrastructure: A case study of the Czech Republic. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2020, vol. 132, no. Oct 2020, p. 1-14. ISSN: 1364-0321.
Detail

MALÝ, M.; CEJPEK, O.; SAPÍK, M.; ONDRÁČEK, V.; WIGLEY, G.; JEDELSKÝ, J. Internal flow dynamics of spill-return pressure-swirl atomizers. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2021, vol. 120, no. 1, p. 1-13. ISSN: 0894-1777.
Detail

BULEJKO, P.; KRIŠTOF, O.; SVĚRÁK, T. Experimental and modeling study on fouling of hollow-fiber membranes by fine dust aerosol particles. JOURNAL OF MEMBRANE SCIENCE, 2020, vol. 616, no. 118562, p. 1-10. ISSN: 0376-7388.
Detail

KŮDELA, J. Social Distancing as p-Dispersion Problem. IEEE Access, 2020, vol. 8, no. 1, p. 149402-149411. ISSN: 2169-3536.
Detail

KRACÍK, P.; TOMAN, F.; POSPÍŠIL, J. Effect of the Flow Velocity of Gas on Liquid Film Flow in a Vertical Tube. Chemical Engineering Transactions, 2020, vol. 81, no. 2020, p. 811-816. ISSN: 2283-9216.
Detail

ZENG, C.; CAO, X.; HAGHIGHAT, F.; YUAN, Y.; KLIMEŠ, L.; EL MANKIBI, M.; DARDIR, M. Buried water-phase change material storage for load shifting: A parametric study. ENERGY AND BUILDINGS, 2020, vol. 227, no. 1, p. 1-17. ISSN: 0378-7788.
Detail

POSPÍŠIL, J.; ŠPILÁČEK, M.; MARTON, D. Flexible Low-Temperature Heat Storage for Heat Pump with Predictive control. Chemical Engineering Transactions, 2020, vol. 81, no. 4, p. 895-900. ISSN: 2283-9216.
Detail

KŮDELA, J.; ŠOMPLÁK, R.; SMEJKALOVÁ, V.; NEVRLÝ, V.; JIRÁSEK, P. The Potential for Future Material Recovery of Municipal Solid Waste: Inputs for Sustainable Infrastructure Planning. Chemical Engineering Transactions, 2020, vol. 81, no. 1, p. 1219-1224. ISSN: 2283-9216.
Detail

STAREČEK, J.; HALUZA, M.; RUDOLF, P. BLADE LOAD ANALYSIS ON SWIRL TURBINE RUNNER WITH NONUNIFORM BLADE CASCADE. MM Science Journal, 2020, no. 4, p. 4019-4026. ISSN: 1805-0476.
Detail

MORAVEC, P.; RUDOLF, P. POPULATION-BASED SHAPE OPTIMIZATION OF A CENTRIFUGAL PUMP IMPELLER. MM Science Journal, 2020, no. 4, p. 3978-3984. ISSN: 1805-0476.
Detail

CHARVÁT, P.; KLIMEŠ, L.; POSPÍŠIL, J.; KLEMEŠ, J.; VARBANOV, P. Feasibility of replacement of nuclear power with other energy sources in the Czech Republic. Thermal Science, 2020, vol. 24, no. 6A, p. 3543-3553. ISSN: 0354-9836.
Detail

KUDELA, L.; CHÝLEK, R.; POSPÍŠIL, J. Efficient Integration of Machine Learning into District Heating Predictive Models. ENERGIES, 2020, vol. 13, no. 23, p. 1-12. ISSN: 1996-1073.
Detail

ZEMANOVÁ, L.; RUDOLF, P. Flow Inside the Sidewall Gaps of Hydraulic Machines: A Review. ENERGIES, 2020, vol. 13, no. 24, p. 1-37. ISSN: 1996-1073.
Detail

ŠTĚTINA, J.; BÖHM, M.; BŘEZINA, M. Small Cogeneration Unit with Heat and Electricity Storage. Xi'an: PRES 20, 2020. p. 1-6.
Detail

MLKVIK, M.; JEDELSKÝ, J.; KARBSTEIN, H.; GAUKEL, V. Spraying of viscous liquids: influence of the fluids mixing mechanism on the performance of the internal-mixing twin fluid atomizers. Applied Sciences - Basel, 2020, vol. 10, no. 15, p. 1-17. ISSN: 2076-3417.
Detail

JEDELSKÝ, J.; MALÝ, M.; JÍCHA, M.; SLÁMA, J.; WIGLEY, G. Importance of Geometrical Factors on Spray Characteristics of Spill-return Atomisers. Journal of Propulsion and Power, 2021, vol. 37, no. 3, p. 408-418. ISSN: 1533-3876.
Detail

URBAN, O.; KURKOVÁ, M.; RUDOLF, P. Application of Computer Graphics Flow Visualization Methods in Vortex Rope Investigations. ENERGIES, 2021, vol. 14, no. 3, p. 1-21. ISSN: 1996-1073.
Detail

ELCNER, J.; JÍCHA, M. Effect of multiple liquid inlets on mass transfer in rotating packed beds. MATEC Web of Conferences. EDP Sciences, 2020. p. 1-4. ISSN: 2261-236X.
Detail

FIALOVÁ, S.; POCHYLÝ, F. A New Formulation of Maxwell’s Equations. Symmetry, 2021, vol. 13, no. 5, p. 868-868. ISSN: 2073-8994.
Detail

BULEJKO, P. An analysis on energy demands in airborne particulate matter filtration using hollow-fiber membranes. Energy Reports, 2021, vol. 7, no. 7, p. 2727-2736. ISSN: 2352-4847.
Detail

ŠTĚTINA, J.; BŘEZINA, M.; BÖHM, M. Small Cogeneration Unit with Heat and Electricity Storage. ENERGIES, 2021, vol. 14, no. 8, p. 1-13. ISSN: 1996-1073.
Detail

KUDELA, L.; ŠPILÁČEK, M.; POSPÍŠIL, J. Influence of control strategy on seasonal coefficient of performance for a heat pump with low-temperature heat storage in the geographical conditions of Central Europe. Energy, 2021, no. 234, p. 121276-121276. ISSN: 0360-5442.
Detail

HIMR, D.; HABÁN, V.; ŠTEFAN, D. Inner Damping of Water in Conduit of Hydraulic Power Plant. Sustainability, 2021, vol. 13, no. 13, p. 1-10. ISSN: 2071-1050.
Detail

MATUŠINEC, J.; HRABEC, D.; ŠOMPLÁK, R.; NEVRLÝ, V.; REDUTSKIY, Y. Cooking oils and fat waste collection infrastructure planning: a regional-level outline. Clean Technologies and Environmental Policy, 2022, vol. 24, no. 1, p. 109-123. ISSN: 1618-954X.
Detail

CHABANNES, L.; ŠTEFAN, D.; RUDOLF, P. Effect of Splitter Blades on Performances of a Very Low Specific Speed Pump. ENERGIES, 2021, vol. 14, no. 13, p. 1-13. ISSN: 1996-1073.
Detail

ŠTEFAN, D.; HUDEC, M.; URUBA, V.; PROCHÁZKA, P.; URBAN, O.; RUDOLF, P. Experimental investigation of swirl number influence on spiral vortex structure dynamics. In IOP Conference Series-Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. IOP Publishing, 2021. p. 012085-012085. ISSN: 1755-1307.
Detail

CHABANNES, L.; ŠTEFAN, D.; RUDOLF, P. Volute throat area and wall modelling influence on the numerical performances of a very low specific speed pump. In IOP Conference Series-Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. IOP Publishing, 2021. p. 012007-012007. ISSN: 1755-1307.
Detail

KŮREČKA, J.; HIMR, D.; HABÁN, V. Dynamics of pressure pulsations in thin annular gap. In Proceedings of 30TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS. IOP Conference Series: Earth and Environmental Science. IOP Publishing, 2021. p. 012145-012145. ISSN: 1755-1315.
Detail

BULEJKO, P.; KRIŠTOF, O.; DOHNAL, M. An Assessment on Average Pressure Drop and Dust-Holding Capacity of Hollow-Fiber Membranes in Air Filtration. Membranes, 2021, vol. 11, no. 7, p. 467-482. ISSN: 2077-0375.
Detail

ZÁLEŠÁK, M.; CHARVÁT, P.; KLIMEŠ, L. Identification of the effective heat capacity–temperature relationship and the phase change hysteresis in PCMs by means of an inverse heat transfer problem solved with metaheuristic methods. Applied Thermal Engineering, 2021, vol. 197, no. 1, p. 117392-1 (117392-14 p.)ISSN: 1359-4311.
Detail

SITEK, T.; POSPÍŠIL, J.; POLÁČIK, J.; CHÝLEK, R. Thermogravimetric analysis of solid biomass fuels and corresponding emission of fine particles. Energy, 2021, no. 237, p. 121609-121609. ISSN: 0360-5442.
Detail

DOBROVOLNÝ, M.; HABÁN, V.; TANCJUROVÁ, J.; ZBAVITEL, J. An Investigation of Viscous Torque Loss in Ball Bearing Operating in Various Liquids. Water, 2021, vol. 13, no. 10, p. 1-10. ISSN: 2073-4441.
Detail

ŠTIGLER, J. Analytical Formula for the Mean Velocity Profile in a Pipe Derived on the Basis of a Spatial Polynomial Vorticity Distribution. Water, 2021, vol. 13, no. 10, p. 1-27. ISSN: 2073-4441.
Detail

FIALOVÁ, S.; POCHYLÝ, F. Constitutive Equations for Magnetic Active Liquids. Symmetry, 2021, vol. 13, no. 10, p. 1910-1910. ISSN: 2073-8994.
Detail

CHÝLEK, R.; KUDELA, L.; POSPÍŠIL, J.; ŠNAJDÁREK, L. Parameters Influencing the Emission of Ultrafine Particles during 3D Printing. International Journal of Environmental Research and Public Health, 2021, vol. 18, no. 21, p. 11670-11670. ISSN: 1660-4601.
Detail

BULEJKO, P.; ŠULEKOVÁ, N.; VLASÁK, J.; TUUNILA, R.; KINNARINEN, T.; SVĚRÁK, T.; HÄKKINEN, A. Ultrafine wet grinding of corundum in the presence of triethanolamine. POWDER TECHNOLOGY, 2022, vol. 395, no. 1, p. 556-561. ISSN: 0032-5910.
Detail

BOUCHAL, P.; HEJČÍK, J.; JÍCHA, M. Hight Speed Temperature Measurement. In EFM21 – 15th International Conference “Experimental Fluid Mechanics 2021”. EPJ Web of Conferences. EPJ Web of Conferences, 2022. p. 40-43. ISSN: 2100-014X.
Detail

ZÁLEŠÁK M.; CHARVÁT, P.; KLIMEŠ, L. Robustness and Accuracy of the Particle Swarm Optimisation Method in the Solution of Inverse Heat Transfer Problems with Phase Change. Chemical Engineering Transactions, 2021, vol. 88, no. 1, p. 301-306. ISSN: 2283-9216.
Detail

TOMAN, F.; KRACÍK, P.; POSPÍŠIL, J. Influence of tube diameter and steam flow rate on heat transfer in a vertical pipe of condenser: experimental investigation of copper pipes. Chemical Engineering Transactions, 2021, vol. 88, no. 2021, p. 601-606. ISSN: 2283-9216.
Detail

KŮDELA, J. Novel Zigzag-based Benchmark Functions for Bound Constrained Single Objective Optimization. In 2021 IEEE Congress on Evolutionary Computation (CEC). IEEE, 2021. p. 857-862. ISBN: 978-1-7281-8393-0.
Detail

FIALOVÁ, S.; POCHYLÝ, F.; VOLKOV, A.V.; RYZHENKOV, A.V.;DRUZHININ, A.A. Methods for Simplification of the Mathematical Model for the Calculation of Flows in the Flow Path of Hydraulic Turbines. Thermal Engineering (English translation of Teploenergetika), 2021, vol. 68, no. 12, p. 906-915. ISSN: 0040-6015.
Detail

POCHYLÝ, F.; FIALOVÁ, S. Use of the Gauss-Ostrogradsky Theorem in the Mechanics of Rigid and Flexible Bodies and Environments. 39th Meeting of Departments of Fluid Mechanics and Thermodynanic. 1. Ostrava: Technical University of Ostrava, 2021. ISBN: 978-80-248-4557-9.
Detail

MALÝ, M.; SLÁMA, J.; CEJPEK, O.; JEDELSKÝ, J. Comparison of numerical models for prediction of pressure-swirl atomizer internal flow. Edinburgh: ILASS - Europe, Institute for Liquid Atomization and Spray Systems, 2021.
Detail

FÜZESI, D.; MALÝ, M.; JEDELSKÝ, J.; JÓZSA, V. Numerical modeling of distributed combustion without air dilution in a novel ultra-low emission turbulent swirl burner. PHYSICS OF FLUIDS, 2022, vol. 34, no. 4, p. 1-13. ISSN: 1070-6631.
Detail

ZUBÍK, P. LDA měření v mezidiskové spáře rotačního stroje. 34rd Symposium on Anemometry. Praha: Institute of Hydrodynamics CAS, v. v. i., 2022. s. 59-62. ISBN: 978-80-87117-21-7.
Detail

MALÝ, M.; SLÁMA, J.; CEJPEK, O.; JEDELSKÝ, J. Searching for a Numerical Model for Prediction of Pressure-Swirl Atomizer Internal Flow. Applied Sciences - Basel, 2022, vol. 12, no. 13, p. 1-18. ISSN: 2076-3417.
Detail

ŠTEFAN, D.; CHABANNES, L.; HUDEC, M.; BEZDÍČEK, J.; RUDOLF, P. Effect of blade layout on performance of low specific speed pump operating in turbine mode. In IOP Conference Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. 2022. p. 1-10. ISSN: 1755-1315.
Detail

KŮDELA, J.; MATOUŠEK, R. Recent advances and applications of surrogate models for finite element method computations: a review. SOFT COMPUTING, 2022, vol. 26, no. 1, p. 13709-13733. ISSN: 1432-7643.
Detail

LINDA, J.; POSPÍŠIL, J.; KÖBÖLOVÁ, K.; LIČBINSKÝ, R.; HUZLÍK J.; KAREL J. Conditions Affecting Wind-Induced PM10 Resuspension as a Persistent Source of Pollution for the Future City Environment. Sustainability, 2022, vol. 14, no. 15, p. 1-12. ISSN: 2071-1050.
Detail

KRACÍK, P.; TOMAN, F.; POSPÍŠIL, J.; KRAML, S. A Heat Exchanger with Water Vapor Condensation on the External Surface of a Vertical Pipe. ENERGIES, 2022, vol. 15, no. 15, p. 1-16. ISSN: 1996-1073.
Detail

CABALKA, M.; CHARVÁT, P.; FIŠER, J.; POPELA, P.; PEŠEK, M. Plug-in Hybrids vs Battery Powered Vehicles - Optimisation Model for Charging Infrastructure at a University Campus. Chemical Engineering Transactions, 2022, vol. 94, no. 1, p. 1051-1056. ISSN: 2283-9216.
Detail

ŠNAJDÁREK, L.; CHÝLEK, R.; POSPÍŠIL, J. Slow thermal decomposition of lignocelluloses compared to numerical model: Fine particle emission, gaseous products analysis. Energy, 2022, no. 261, p. 1-11. ISSN: 0360-5442.
Detail

KŮDELA, J.; MATOUŠEK, R. Combining Lipschitz and RBF Surrogate Models for High-dimensional Computationally Expensive Problems. INFORMATION SCIENCES, 2022, vol. 619, no. January, p. 457-477. ISSN: 0020-0255.
Detail

FIALOVÁ, S.; POCHYLÝ, F.; VOLKOV, A.V.; ŠOUKAL,J. Practical aspects of the wettability. In EFM19 – Experimental Fluid Mechanics 2019. EPJ Web of Conferences. 1. EPJ Web Conf., 2022. ISSN: 2100-014X.
Detail

TOMAN, F.; KRACÍK, P.; POSPÍŠIL, J. Heat transfer during condensation of water vapour in the presence of non-condensable gas in vertical tube of small diameter. Case Studies in Thermal Engineering, 2022, vol. 40, no. 12, p. 1-15. ISSN: 2214-157X.
Detail

LINDA, J.; KÖBÖLOVÁ, K.; UHLÍK, O.; POSPÍŠIL, J.; APELTAUER, T. Seasonal Variability of Resuspension. In 2261-236X. MATEC Web of Conferences. Piešťany: EDP Sciences, 2022. p. 1-11. ISSN: 2261-236X.
Detail

CEJPEK, O.; MALÝ, M.; HÁJEK, O.; PRINZ, F.; AVULAPATI, M.; JEDELSKÝ, J. Pressure Swirl Spray Characteristics Under Cross-flow. 2022. p. 1-6.
Detail

CEJPEK, O.; MALÝ, M.; BĚLKA, M.; DECANAY, L.; AVULAPATI, M.; JEDELSKÝ, J. Single Orifice Effervescent Atomizer in simulated Counter–flow Conditions. 2022.
Detail

KAVIČKA, F.; KATOLICKÝ, J.; MAUDER, T.; KLIMEŠ, L.; ŠTĚTINA, J. Analysis of the Influence of Boundary Condition on Simulation Accuracy of Solidification Thermokinetics Model. In MATEC Web of Conferences. MATEC Web of Conferences. MATEC Web of Conferences, 2022. p. 1-6. ISSN: 2261-236X.
Detail

KUDELA, L.; ŠPILÁČEK, M.; POSPÍŠIL, J. Multicomponent numerical model for heat pump control with low-temperature heat storage: A benchmark in the conditions of Central Europe. Journal of Building Engineering, 2023, no. 66, ISSN: 2352-7102.
Detail

KLIMEŠ, L.; KAMARÝT, P.; CHARVÁT, P.; ZÁLEŠÁK, M.; PEŠEK, M. Solution to Inverse Heat Transfer Problems by Means of Soft Computing Approach and Its Comparison to the Well-Established Beck’s Method. Chemical Engineering Transactions, 2022, vol. 94, no. 1, p. 433-438. ISSN: 2283-9216.
Detail

ZÁLEŠÁK, M., KLIMEŠ, L.; CHARVÁT, P.; DUDA ,J. Assessment of Modelling Approaches for Partial Phase Charges of PCMs. Chemical Engineering Transactions, 2022, vol. 94, no. 1, p. 457-462. ISSN: 2283-9216.
Detail

ZÁLEŠÁK, M.; CHARVÁT, P.; KLIMEŠ, L. AN INVERSE IDENTIFICATION OF THE AIR MASS FLOW RATE DISTRIBUTION IN THE AIR CHANNELS OF AN AIR-PCM HEAT EXCHANGER. In Proceedings of the Thermal and Fluids Engineering Summer Conference. 4th Thermal and Fluids Engineering Conference. Begell House Inc., 2022. p. 1311-1316. ISSN: 2379-1748.
Detail

ZEMANOVÁ, L.; ZUBÍK, P.; RUDOLF, P. Experimental Investigation of Flow Inside the Back-Sidewall Gaps of Centrifugal Pump and its Impact on Axial Thrust. In IOP Conference Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. 1079. Institute of Physics, 2022. p. 1-11. ISSN: 1755-1307.
Detail

URBAN, O.; RUDOLF, P. On the existence of adverse pressure gradient in decelerated swirling flow and its suppression by water jet injection. In IOP Conference Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. 1079. Institute of Physics, 2022. p. 1-12. ISSN: 1755-1307.
Detail

POCHYLÝ, F.; FIALOVÁ, S. Use of the Gauss-Ostrogradsky theorem in the mechanics of rigid and flexible bodies and environments. In 39th Meeting of Departments of Fluid Mechanics and Thermodynamics. AIP Conference Proceedings. AIP Publishing, 2023. p. 1-6. ISBN: 978-0-7354-4325-9.
Detail

PÍRKOVÁ, M.; FIALOVÁ, S., LUNDA, F. A new concept of large-scale urban irrigation. In AIP Conference Proceedings - 39TH MEETING OF DEPARTMENTS OF FLUID MECHANICS AND THERMODYNAMICS. 2023. p. 020015-1 (020015-6 p.)ISBN: 978-0-7354-4325-9.
Detail

JÓZSA, V.; MALÝ, M.; FÜZESI, D.; RÁCZ, E.; KARDOS, R.; JEDELSKÝ, J. Schlieren analysis of non-MILD distributed combustion in a mixture temperature-controlled burner. Energy, 2023, vol. 273, no. 1, p. 1-12. ISSN: 0360-5442.
Detail

KŮDELA, J.; SUJA, J.; ŠOMPLÁK, R.; PLUSKAL, J.; HRABEC, D. Optimal control of combined heat and power station operation. OPTIMIZATION AND ENGINEERING, 2023, vol. 1, no. 1, p. 1-25. ISSN: 1389-4420.
Detail

JEDELSKÝ, J.; CEJPEK, O.; MALÝ, M.; Vysoké učení technické v Brně, Antonínská 548/1, 602 00 Brno, Veveří, Česká republika: Větrný tunel. 309563, patent. (2023)
Detail

CEJPEK, O.; MALÝ, M.; JEDELSKÝ, J.: Větrný tunel pro spreje; Aerodynamický tunel pro výzkum atomizace. Vysoké učení technické v Brně, Fakulta strojního inženýrství, Technická 2896/2, 61669 Brno, místnost C3/0213d. (funkční vzorek)
Detail

SAPÍK, M.; MALÝ, M.; JEDELSKÝ, J.: Modulární průhledná tryska; Transparentní modulární tlaková vířivá tryska. Vysoké učení technické v Brně, Fakulta strojního inženýrství, Technická 2896/2, 61669 Brno, místnost C3/0213d. (funkční vzorek)
Detail