Publications

• 2023

  HOLUB, M.; ANDRŠ, O.; ŠTĚPÁNEK, V.; KROUPA, J.; HUZLÍK, R.; TŮMA, J.; KOVÁŘ, J.; MARADA, T.; BRADÁČ, F. Experimental study of operational data collection from CNC machine tools for advanced analysis. In 2022 20th International Conference on Mechatronics - Mechatronika (ME). 2023. ISBN: 978-1-6654-1040-3.
  Detail | WWW

• 2022

  KŠICA, F.; RUBEŠ, O.; KOVÁŘ, J.; CHALUPA, J.; HADAŠ, Z. Smart Sensing System for Railway Monitoring. In Proceedings of the 2022 20th International Conference on Mechatronics - Mechatronika (ME). Pilsen: IEEE, 2022. ISBN: 978-1-6654-1040-3.
  Detail | WWW

  TŮMA, Z.; KOTEK, L.; KROUPA, J.; ŠUBRT, K.; BLECHA, P.; KOVÁŘ, J.; DADO, M.; HEINRICH, P. POSSIBILITY OF AUTOMATED ERGONOMIC EVALUATIONS IN VIRTUAL REALITY ENVIRONMENTS. MM Science Journal, 2022, vol. 2022, no. 11, p. 6059-6063. ISSN: 1805-0476.
  Detail | WWW

• 2021

  TŮMA, Z.; KOTEK, L.; ŠUBRT, K.; KROUPA, J.; KOVÁŘ, J.; BLECHA, P.; BRADÁČ, F. Teaching of Safety Engineering during the COVID-19 Pandemic. In Proceedings of the 31st European Safety and Reliability Conference and (ESREL 2021). Singapore: Research Publishing, Singapore, 2021. p. 3150-3154. ISBN: 978-981-18-2016-8.
  Detail | WWW

  ŠTĚPÁNEK, V.; BRAŽINA, J.; HOLUB, M.; VETIŠKA, J.; KOVÁŘ, J.; KROUPA, J.; JELÍNEK, A. Implementation of Industry 4.0 Elements in Industrial Metrology – Case Study. In Digitizing Production Systems. Lecture Notes in Mechanical Engineering. 1. Springer, Cham, 2021. p. 296-308. ISBN: 978-3-030-90421-0. ISSN: 2195-4356.
  Detail | WWW

• 2019

  HOLUB, M.; VETIŠKA, J.; ANDRŠ, O.; KOVÁŘ, J. Effect of position of temperature sensors on the resulting volumetric accuracy of the machine tool. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2019, vol. 2020, no. 150, p. 1-8. ISSN: 0263-2241.
  Detail | WWW

  HOLUB, M.; TŮMA, Z.; KROUPA, J.; KOVÁŘ, J.; BLECHA, P. Case Study of Digitization of the Production Cell. In Proceedings of the International Symposium for Production Research 2019. Lecture Notes in Mechanical Engineering. 1. Springer International Publishing, 2019. p. 253-262. ISBN: 978-3-030-31342-5. ISSN: 2195-4356.
  Detail | WWW

• 2018

  KROUPA, J.; TŮMOVÁ, E.; TŮMA, Z.; KOVÁŘ, J.; SINGULE, V. Processing and visualization of microclimatic data by virtual reality. MM Science Journal, 2018, vol. 2018, no. December, p. 2621-2624. ISSN: 1805-0476.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; PROKEŠ, T. Effect of width of kerf on machining accuracy and subsurface layer after WEDM. Journal of Materials Engineering and Performance, 2018, vol. 27, no. 4, p. 1908-1916. ISSN: 1059-9495.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; BLAŽÍK, P.; KALIVODA, M.; KOUSAL, P. Analysis of surface and subsurface layers after WEDM for Ti-6Al-4V with heat treatment. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2018, vol. 2018, no. 116, p. 556-564. ISSN: 0263-2241.
  Detail | WWW

  PROKEŠ, T.; MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; ANDRŠ, O. Cutting Insert Wear Analysis Using Industry 4.0. In Mechatronics 2017, Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing. Brno: Springer, Cham, 2018. p. 133-140. ISBN: 978-3-319-65960-2. ISSN: 2194-5357.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; HOLUB, M. Analysis of Machinability of Pure-Cobalt Disc for Magnetron Deposition Using WEDM. In Mechatronics 2017, Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing. Brno: Springer, Cham, 2018. p. 141-148. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
  Detail | WWW

  KROUPA, J.; TŮMA, Z.; KOVÁŘ, J.; SINGULE, V. Virtual laboratory for study of construction of machine tools. MM Science Journal, 2018, vol. 2018, no. November, p. 2503-2506. ISSN: 1805-0476.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J.; BENEŠ, L.; ZAHRADNÍČEK, R. Analysis of the surface morphology and topography of pure aluminium machined using WEDM. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2018, vol. 2018, no. 114, p. 169-176. ISSN: 0263-2241.
  Detail | WWW

• 2017

  MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; KALIVODA, M. Quality of aluminium alloy surface after WEDM. MM Science Journal, 2017, vol. 2017, no. 1, p. 1679-1682. ISSN: 1803-1269.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L. Evaluation of total hight of profile of the surface machined by WEDM. MM Science Journal, 2017, vol. 2017, no. 1, p. 1674-1678. ISSN: 1803-1269.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; KALIVODA, M.; DVOŘÁK, M. Experimental evaluation of the quality of surface after WEDM for steel X210CR12. MM Science Journal, 2017, vol. 2017, no. 2, p. 1778-1782. ISSN: 1803-1269.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; PROKEŠ, T.; HORYNOVÁ, M. Comparison of morphology and topography of surfaces of WEDM machined structural materials. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2017, vol. 2017, no. 104, p. 12-20. ISSN: 0263-2241.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T.; BEDNÁŘ, J.; HRABEC, P. Optimalization of WEDM settings parameters when machining pure aluminium using DoE. MM Science Journal, 2017, vol. 2017, no. 4, p. 2105-2108. ISSN: 1803-1269.
  Detail | WWW

• 2016

  KOVÁŘ, J.; MOURALOVÁ, K.; KŠICA, F.; KROUPA, J.; ANDRŠ, O.; HADAŠ, Z. Virtual Reality in Context of Industry 4.0. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 1-7. ISBN: 978-80-01-05882-4.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R. Machining of highly oriented pyrolitic graphite using WEDM and the resulting quality of the surface. MM Science Journal, 2016, vol. 2016, no. 6, p. 1621-1624. ISSN: 1803-1269.
  Detail | WWW

  PROKEŠ, T.; MOURALOVÁ, K.; KOVÁŘ, J. Experimental evaluation on the quality of machined surface after turning of material Inconel 625. MM Science Journal, 2016, vol. 2016, no. 6, p. 1617-1620. ISSN: 1803-1269.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Application of the genetic algorithm for analysis of input parameters of WEDM technology for TI-6AL- 4V. Mendel Journal series, 2016, vol. 2016, no. 22, p. 271-274. ISSN: 1803-3814.
  Detail

  MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Experimental statistical evaluation of S- parameters on surface machined using WEDM. Mendel Journal series, 2016, vol. 2016, no. 22, p. 261-264. ISSN: 1803-3814.
  Detail

  MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Experimental statistical evaluation of surface waviness machined using WEDM. Mendel Journal series, 2016, vol. 2016, no. 22, p. 275-280. ISSN: 1803-3814.
  Detail

  MOURALOVÁ, K.; MATOUŠEK, R.; KOVÁŘ, J.; MACH, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J. Analyzing the surface layer after WEDM depending on the parameters of a machine for the 16MnCr5 steel. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2016, vol. 2016, no. 94, p. 771-779. ISSN: 0263-2241.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; SLIWKOVÁ, P. Evaluation of S-parameters on the surface of titanium alloy Ti-6Al-4V and Al99. 5 machined by WEDM. MM Science Journal, 2016, vol. 2016, no. 6, p. 1537-1540. ISSN: 1803-1269.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; BENEŠ, L.; OSIČKA, K. Effect of wirefeed rate on the morphology of a surface machined using WEDM. Manufacturing TECHNOLOGY, 2016, vol. 2016, no. 4, p. 754-757. ISSN: 1213-2489.
  Detail

  ANDRŠ, O.; VETIŠKA, J.; HOLUB, M.; KOVÁŘ, J. Model Based Design of Fuel Pump Control. Applied Mechanics and Materials, 2016, vol. 2016, no. 821, p. 601-607. ISSN: 1662- 7482.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; KARPÍŠEK, Z.; KOUSAL, P. Optimization machining of titanium alloy Ti-6Al-4V by WEDM with emphasis on the quality of the machined surface. Manufacturing TECHNOLOGY, 2016, vol. 2016, no. 6, p. 1326-1331. ISSN: 1213-2489.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; HOUŠKA, P. Experimental evaluation of WEDM machined surface waviness. Acta Polytechnica (on-line), 2016, vol. 56, no. 5, p. 360-366. ISSN: 1805-2363.
  Detail | WWW | Full text in the Digital Library

  MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T.; BEDNÁŘ, J.; MATOUŠEK, R.; KLAKURKOVÁ, L. Statistical evaluation width of kerf after WEDM by Analysis of Variance. Mendel Journal series, 2016, vol. 2016, no. 22, p. 301-304. ISSN: 1803-3814.
  Detail

  MOURALOVÁ, K.; BEDNÁŘ, J.; KOVÁŘ, J.; MACH, J. Evaluation of MRR after WEDM depending on the resulting surface. Manufacturing TECHNOLOGY, 2016, vol. 2016, no. 2, p. 396-401. ISSN: 1213-2489.
  Detail

  RUČKA, J.; ANDRŠ, O.; KOVÁŘ, J. DESIGN OF THE PUMP CONTROLLER OF THE LOW PRESSURE SEWER NETWORK. MM Science Journal, 2016, vol. 6, no. 1, p. 1654-1658. ISSN: 1805-0476.
  Detail | WWW

  ANDRŠ, O.; KOVÁŘ, J.; RUČKA, J. Design of Test Device for Automatic Pressure Sewerage Control Unit. In Mechatronika 2016. 1. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 55-60. ISBN: 978-80-01-05882-4.
  Detail | WWW

  MOURALOVÁ, K.; KARPÍŠEK, Z.; KOVÁŘ, J.; KLAKURKOVÁ, L. Freeman-Tukey Pseudoquasi-norm for Evaluating the Total Height of Profile Rt after WEDM. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 455-460. ISBN: 978-80-01-05882-4.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Optimization of the Cutting Speed for Ti-6Al-4V Using WEDM Depending on Quality of the Machined Surface. In Mechatronika 2016. 1. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 450-454. ISBN: 978-80-01-05882-4.
  Detail | WWW

  MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; MAN, O. Characterisation of 3D Topography of the Surface Machined by Finishing Technologies of WEDM and Grinding. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 445-449. ISBN: 978-80-01-05882-4.
  Detail | WWW

• 2015

  ANDRŠ, O.; VETIŠKA, J.; HOLUB, M.; KOVÁŘ, J. Model Based Design of Fuel Pump Control. In Engineering Mechanics 2015 Extended Abstracts. First edition, 2015. ŽĎAS, a.s. Žďár nad Sázavou: Institute of Theoretical and Applied Mechanics, Academy of Sciences of the Czech Republic, 2015. p. 10-11. ISBN: 978-80-86246-42- 0.
  Detail

  ANDRŠ, O.; KOVÁŘ, J.; VETIŠKA, J.; SINGULE, V. VYUŽITÍ KOSIMULAČNÍHO MODELOVÁNÍ PŘI NÁVRHU ŘÍZENÍ MECHATRONICKÝCH SOUSTAV. In Zborník príspevkov z konferencie SEKEL 2015. 1. Tatranská Štrba: Žilinská univerzita v Žilině, Elektrotechnická fakulta, 2015. p. 7-12. ISBN: 978-80-554-1089- 0.
  Detail

  MOURALOVÁ, K.; DVOŘÁKOVÁ, J.; DVOŘÁK, J.; KOVÁŘ, J.; KARPÍŠEK, Z.; SLIWKOVÁ, P. Experimental analysis on machinability of aluminium alloy using WEDM technology. MM Science Journal, 2015, vol. 2015, no. 4, p. 722-727. ISSN: 1803- 1269.
  Detail

  RUČKA, J.; KOVÁŘ, J.; ANDRŠ, O.; SUCHÁČEK, T. Aspects of pressure sewerage system design. MM Science Journal, 2015, vol. 2015, no. 4, p. 785-789. ISSN: 1803-1269.
  Detail

  MOURALOVÁ, K.; KOVÁŘ, J. QUALITY OF DIMENSIONS ACCURANCY OF COMPONENTS AFTER WEDM DEPENDING ON THE HEAT TREATMENT. MM Science Journal, 2015, vol. 2015, no. 4, p. 790-793. ISSN: 1803- 1269.
  Detail

  MOURALOVÁ, K.; BEDNÁŘ, J.; KOVÁŘ, J. Soft optimization of significant process parameters of WEDM: A result for Steel 16MnCr5. Mendel Journal series, 2015, vol. 2015, no. 21, p. 201-204. ISSN: 1803- 3814.
  Detail

• 2014

  ANDRŠ, O.; KOVÁŘ, J.; HADAŠ, Z. Introduction to Design of Speed Controller for Fuel Pump. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: VUT v Brně, 2014. p. 672-676. ISBN: 978-80-214-4817- 9.
  Detail

  KOVÁŘ, J.; RUČKA, J.; ANDRŠ, O. Simulation Modelling of Water- supply Network as Mechatronic System. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: VUT v Brně, 2014. p. 697-700. ISBN: 978-80-214-4817- 9.
  Detail

  RUČKA, J.; KOVÁŘ, J. Řízené proplachy vodovodních sítí. In Provoz vodovodů a kanallizací 2014. SOVAK - sdružení oboru vodovodů a kanalizací. Líbeznice, ČR: Medim, spol. s r.o., 2014. p. 105-109. ISBN: 978-80-87140-36- 9.
  Detail | WWW

  RUČKA, J.; KOVÁŘ, J. Prevention of discoloration events in water distribution systems. In PROCEDIA ENGINEERING, volume 70. Procedia Engineering. Exeter, UK: Elsevier, 2014. p. 1441-1449. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  KOVÁŘ, J.; RUČKA, J. Some notes to the using of GA for pump scheduling in real- time regime. In 20th International Conference on Soft Computing, MENDEL 2014 (id 22122). Mendel Journal series. 2014. Brno, ČR: VUT, 2014. p. 415-420. ISBN: 978-80-214-4984- 8. ISSN: 1803- 3814.
  Detail

• 2013

  KOVÁŘ, J.; ANDRŠ, O.; DALECKÝ, F. Using of Hough Transform for Automatic Robot Sorting System. In 19th International Conference on Soft Computing MENDEL 2013. Mendel Journal series. 1. Brno, ČR: 2013. p. 375-378. ISBN: 978-80-214-4755- 4. ISSN: 1803- 3814.
  Detail

  KOVÁŘ, J.; RUČKA, J. Software Tool for Calibration of Hydraulic Models of Water- Supply Networks. In Mechatronics 2013 Recent Technological and Scientific Advances. 1. London: Springer, 2013. p. 253-258. ISBN: 978-3-319-02293- 2.
  Detail

  ANDRŠ, O.; KOVÁŘ, J. FORWARD KINEMATICS MODELLING OF A PARALLEL DEVICE FOR CORD IMPLANTS TUNING. In 19th International Conference on Soft Computing MENDEL 2013. Mendel Journal series. 1. Brno, ČR: 2013. p. 283-288. ISBN: 978-80-214-4755- 4. ISSN: 1803- 3814.
  Detail

  ANDRŠ, O.; HADAŠ, Z.; KOVÁŘ, J.; VETIŠKA, J.; SINGULE, V. Model-Based Design of Mobile Platform with Integrated Actuator – Design with Respect to Mechatronic Education. In MECHATRONICS 2013: RECENT TECHNOLOGICAL AND SCIENTIFIC ADVANCES. 1. Springer, 2013. p. 891-988. ISBN: 978-3-319-02294- 9.
  Detail

  BŘEZINA, L.; HOLUB, M.; CINTULA, L.; KOVÁŘ, J. Delta robot design. In Mechatronic systems and materials IV. Solid State Phenomena. Switzerland: Trans Tech Publications, 2013. p. 9-14. ISBN: 978-3-03785-637- 6. ISSN: 1012-0394.
  Detail

• 2012

  KOVÁŘ, J.; ANDRŠ, O.; BŘEZINA, L.; SINGULE, V. Laboratory Delta Robot For Mechatronic Education Purposes. In Proceedings of International Symposium on Power Electronics, Electrical Drives, Automation and Motion - SPEEDAM 2012. 1. Sorrento, Itálie: 2012. p. 1209-1212. ISBN: 978-1-4673-1299- 8.
  Detail

  HADAŠ, Z.; VETIŠKA, V.; SINGULE, V.; ANDRŠ, O.; KOVÁŘ, J.; VETIŠKA, J. Energy Harvesting from Mechanical Shocks Using A Sensitive Vibration Energy Harvester. International Journal of Advanced Robotic Systems, 2012, vol. 2012, no. 9, p. 1-7. ISSN: 1729- 8806.
  Detail

• 2011

  KOVÁŘ, J.; ANDRŠ, O. Particle Swarm Optimization Technique Applied To Image Recognition Using Delta Robot. In Proceedings of 17th International Conference on Soft Computing. Mendel Journal series. 1. Brno, ČR: Brno University of Technology VUT Press, 2011. p. 67-72. ISBN: 978-80-214-4302- 0. ISSN: 1803- 3814.
  Detail

  BŘEZINA, T.; HEJČ, T.; KOVÁŘ, J. Modeling and Control of Three- Phase Inverter of Swirl Turbine. In PROCEEDINGS OF 14th INTERNATIONAL CONFERENCE ON MECHATRONICS. 2011. Trencin, SK: Alexander Dubcek University of Trencin, 2011. p. 1-5. ISBN: 978-80-8075-394- 8.
  Detail

  ANDRŠ, O.; BŘEZINA, T.; KOVÁŘ, J. Design of fuzzy logic controller for DC motor. In Mechatronics Recent Technological and Scientific Advances. 1. Varšava: Springer, 2011. p. 9-18. ISBN: 978-3-642-23243- 5.
  Detail

  BŘEZINA, T.; KOVÁŘ, J.; HEJČ, T.; ANDRŠ, O. Modeling and H- infinity Control of Centrifugal Pump with Pipeline. In Mechatronics Recent Technological and Scientific Advances. 1. Varšava: Springer, 2011. p. 523-530. ISBN: 978-3-642-23243- 5.
  Detail

  BŘEZINA, T.; ANDRŠ, O.; BŘEZINA, L.; HADAŠ, Z.; HOUŠKA, P.; KOVÁŘ, J.; VETIŠKA, J. VIRTUAL DESIGN OF INDUSTRIAL MANIPULATOR USING MECHATRONIC APPROACH. In Proceedings of the International Conference on Advances in Mechatronics 2011 (AIM 11). 1. Brno: Expertia o.p.s., 2011. p. 105-110. ISBN: 978-80-7231-848- 3.
  Detail

  BŘEZINA, T.; HEJČ, T.; KOVÁŘ, J.; HUZLÍK, R. Modeling and Control of Three- Phase Rectifier of Swirl Turbine. In Mechatronics Recent Technological and Scientific Advances. 1. Varšava: Springer, 2011. p. 285-291. ISBN: 978-3-642-23243- 5.
  Detail

  BŘEZINA, T.; KOVÁŘ, J.; HEJČ, T. Modeling and Control of System with Pump and Pipeline by Pole Placement Method. In PROCEEDINGS OF 14th INTERNATIONAL CONFERENCE ON MECHATRONICS. 2011. Trencin, SK: Alexander Dubcek University of Trencin, 2011. p. 6-9. ISBN: 978-80-8075-394- 8.
  Detail

  ANDRŠ, O.; KOVÁŘ, J. Design of Scan Machine for Image Cataloging. In Annals Of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity". Inteligent Manufacturing and Automation: Focus on Young Researches and Scientists. 1. Vienna: 2011. p. 855-856. ISBN: 978-3-901509-83- 4. ISSN: 1726- 9679.
  Detail

• 2010

  SINGULE, V.; KOVÁŘ, J. Pohony Maxon jako akční členy nové koncepce umělých svalů humanoidního robotu. Automa, 2010, vol. 16, no. 8- 9, p. 66-68. ISSN: 1210- 9592.
  Detail

  KOVÁŘ, J.; BŘEZINA, T. MODEL OF PIPELINE WITH PUMP FOR PREDICTIVE CONTROL. In Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation : Focus on Interdisciplinary Solutions". Vienna: DAAAM INTERNATIONAL VIENNA 2010, 2010. p. 1363-1364. ISBN: 978-3-901509-73- 5.
  Detail

  KOVÁŘ, J.; BŘEZINA, T. Optimalizace parametrů PI regulátoru pomocí evolučních metod. Strojárstvo/ Strojírenství, 2010, vol. 14, no. 5, p. 32/ 1 (32/3 p.)ISSN: 1335- 2938.
  Detail

  KOVÁŘ, J.; BŘEZINA, T. OPTIMALIZACE PARAMETRŮ PI REGULÁTORU POMOCÍ EVOLUČNÍCH METOD. In AUTOMATIZÁCIA A RIADENIE V TEÓRII A PRAXI 2010. Košice: 2010. p. 32/ 1 (32/3 p.)ISBN: 978-80-553-0347- 5.
  Detail

*) Publications are generated once a 24 hours.