Přístupnostní navigace
E-application
Search Search Close
prof. Ing.
Dr.
FME, IMSE DCP – Professor
+420 54114 3339trunec@fme.vutbr.cz
Send BUT message
2024
TRUNEC, M.; ŠŤASTNÝ, P.; KAŠTYL, J.; ROUPCOVÁ, P.; CHLUP, Z. 2Y-TZP ceramics with high strength and toughness by optimizing the microstructure. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2024, vol. 44, no. 5, p. 3258-3266. ISSN: 1873-619X.Detail | WWW
CIHLÁŘ, J.; TKACHENKO, S.; BEDNAŘÍKOVÁ, V.; CIHLÁŘ, J.; ČÁSTKOVÁ, K.; TRUNEC, M.; ČELKO, L. Study of the Synthesis of Multi-Cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Co-Ni-O Aerogels and Their Catalytic Activity in the Dry Reforming of Methane. Gels, 2024, vol. 10, no. 5, ISSN: 2310-2861.Detail | WWW
SVANDOVA, L.; PAZDERKA, M.; PRIBYL, R.; STASTNY, P.; KELAR, J.; TUCEKOVA, ZK.; SLAVICEK, P.; TRUNEC, M.; CERNAK, M. Complex characterisation of Cr-doped α-Al2O3 for DBD applications. Journal of Physics D - Applied Physics, 2024, vol. 57, no. 17, ISSN: 1361-6463.Detail | WWW
2023
ŠŤASTNÝ, P.; CHLUP, Z.; HLINIČAN, J.; KAŠTYL, J.; TRUNEC, M. Effect of cyclic loading on the microstructure of thin zirconia tapes. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2023, vol. 43, no. 10, p. 4498-4505. ISSN: 1873-619X.Detail | WWW
2022
TRUNEC, M.; ŠŤASTNÝ, P.; KAŠTYL, J. Defect-free drying of large fine-particle zirconia compacts prepared by gelcasting method. Journal of the European Ceramic Society, 2022, vol. 42, no. 15, p. 7180-7186. ISSN: 0955-2219.Detail | WWW
LÁZŇOVSKÝ, J.; BŘÍNEK, A.; ZIKMUND, T.; BOUDOVÁ, M.; VOJTOVÁ, L.; DORAZILOVÁ, J.; TRUNEC, M.; ŠŤASTNÝ, P.; KRTIČKA, M.; PLÁNKA, L.; IRA, D.; FALDYNA, M.; KAISER, J. Automatic 3D analysis of the ex-vivo porcine lumbar interbody fusion based on X-ray micro computed tomography data. COMPUTERS IN BIOLOGY AND MEDICINE, 2022, vol. 145, no. 105438, p. 1-12. ISSN: 0010-4825.Detail | WWW
KAŠTYL, J.; ŠŤASTNÝ, P.; CHLUP, Z.; SONG, L.; ŠČASNOVIČ, E.; TRUNEC, M. Gelcast zirconia ceramics for dental applications combining high strength and high translucency. Journal of the American Ceramic Society, 2022, vol. 105, no. 6, p. 3909-3924. ISSN: 0002-7820.Detail | WWW
ŠŤASTNÝ, P.; SMIEŠKOVÁ, J.; TRUNEC, M. Preparation of multilayer ceramic tapes by aqueous gel-tape co-casting. CERAMICS INTERNATIONAL, 2022, vol. 48, no. 21, p. 32546-32550. ISSN: 1873-3956.Detail | WWW
2021
ŠŤASTNÝ, P.; CHLUP, Z.; ROUPCOVÁ, P.; TRUNEC, M. Thin high-strength zirconia tapes with extreme flexibility. Journal of Asian Ceramic Societies, 2021, vol. 9, no. 3, p. 964-974. ISSN: 2187-0764.Detail | WWW | Full text in the Digital Library
KRTIČKA, M.; PLÁNKA, L.; VOJTOVÁ, L.; NEKUDA, V.; ŠŤASTNÝ, P.; SEDLÁČEK, R.; BŘÍNEK, A.; KAVKOVÁ, M.; GÖPFERT, E.; HEDVIČÁKOVÁ, V.; RAMPICHOVÁ, M.; KŘEN, L.; LIŠKOVÁ, K.; IRA, D.; DORAZILOVÁ, J.; SUCHÝ, T.; ZIKMUND, T.; KAISER, J.; STARÝ, D.; FALDYNA, M.; TRUNEC, M. Lumbar Interbody Fusion Conducted on a Porcine Model with a Bioresorbable Ceramic/Biopolymer Hybrid Implant Enriched with Hyperstable Fibroblast Growth Factor 2. Biomedicines, 2021, vol. 9, no. 7, p. 733-758. ISSN: 2227-9059.Detail | WWW | Full text in the Digital Library
ŠŤASTNÝ, P.; CHLUP, Z.; ČÁSTKOVÁ, K.; TRUNEC, M. High strength alumina tapes prepared by gel-tape casting method. Ceramics International, 2021, vol. 47, no. 5, p. 6988-6995. ISSN: 0272-8842.Detail | WWW
TRUNEC, M.; KAŠTYL, J.; ŠŤASTNÝ, P.; HILDEBRANDT, S. Processing of large and complex-shaped fine-grained alumina bodies with high transparency. Journal of the European Ceramic Society, 2021, vol. 41, no. 3, p. 2016-2022. ISSN: 0955-2219.Detail | WWW
2020
ŠŤASTNÝ, P.; CHLUP, Z.; TRUNEC, M. Gel-tape casting as a novel method for the production of flexible fine-grained alumina sheets. Journal of the European Ceramic Society, 2020, vol. 40, no. 7, p. 2542-2547. ISSN: 0955-2219.Detail | WWW
KAŠTYL, J.; CHLUP, Z.; ŠŤASTNÝ, P.; TRUNEC, M. Machinability and properties of zirconia ceramics prepared by gelcasting method. Advances in Applied Ceramics, 2020, vol. 119, no. 5-6, p. 252-260. ISSN: 1743-6761.Detail | WWW | Full text in the Digital Library
SEDLÁČEK, R.; SUCHÝ, T.; LAXOVÁ, Š.; LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; VOJTOVÁ, L.; KRTIČKA, M.; PLÁNKA, L.; GÖPFERT, E.; FALDYNA, M.; TRUNEC, M. Analýza ohybové tuhosti páteře po intervertebrální fúzi. Biomateriály a jejich povrchy XIII. Praha: České vysoké učení technické v Praze, 2020. p. 75-76. ISBN: 978-80-01-06754-3.Detail | WWW
ŠŤASTNÝ, P.; VACEK, P.; TRUNEC, M. Characterization of microstructure and phase distribution of sintered multiphasic calcium phosphate bioceramics. Ceramics International, 2020, vol. 46, no. 4, p. 5500-5504. ISSN: 0272-8842.Detail | WWW
PŘIBYL, R.; ŠŤASTNÝ, P.; PAZDERKA, M.; KELAR, J.; KELAR TUČEKOVÁ, Z.; ZEMÁNEK, M.; TRUNEC, M.; ČERNÁK, M. Properties of MgAl2O4 doped alumina barrier layers for dielectric barrier discharge. Journal of Physics D - Applied Physics, 2020, vol. 53, no. 50, p. 505202-1 (505202-11 p.)ISSN: 1361-6463.Detail | WWW
2019
TRUNEC, M.; ŠŤASTNÝ, P.; KELAR, J.; PAZDERKA, M. Effect of plasma treatment of polymeric tape carriers on wetting behaviour of aqueous ceramic tape casting slurry. Ceramics International, 2019, vol. 45, no. 7, p. 9318-9385. ISSN: 0272-8842.Detail | WWW
DORAZILOVÁ, J.; BRTNÍKOVÁ, J.; SEDLÁČEK, R.; SUCHÝ, T.; TRUNEC, M.; ŠŤASTNÝ, P.; RAMPICHOVÁ, M.; LUKÁŠOVÁ, V.; KRTIČKA, M.; GÖPFERT, E.; FALDYNA, M.; ŠŤEPÁNKOVÁ, V.; VOJTOVÁ, L. Polyphosphates as an alternative for growth factors: Improving cytocompatibility of hybrid nanocomposites for lateral lumbar spinal fusion. 30th Annual Conference of the European Society for Biomaterials. ESB 2019 Abstract Booklet. Dresden: 2019. p. 1208-1209. Detail
SEDLÁČEK, R.; SUCHÝ, T.; VONDROVÁ, J.; LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; TRUNEC, M.; ŠŤASTNÝ, P.; VOJTOVÁ, L.; KRTIČKA, M. Mechanické vlastnosti porézních keramických materiálů – elastický gradient. XI. mezinárodní konference Bioimplantologie 2019. MSD spol.: 2019. p. 53-53. ISBN: 978-80-7392-307-5.Detail
LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; DORAZILOVÁ, J.; ŠŤASTNÝ, P.; SEDLÁČEK, R.; TRUNEC, M.; KRTIČKA, M.; VOJTOVÁ, L. In vitro testování porézních keramických nosičů obohacených o bioaktivní látky. XI. mezinárodní konference Bioimplantologie 2019. 1. Brno: MSD spol., 2019. p. 50-50. ISBN: 978-80-7392-307-5.Detail
ŠŤASTNÝ, P.; SEDLÁČEK, R.; SUCHÝ, T.; LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; TRUNEC, M. Structure degradation and strength changes of sintered calcium phosphate bone scaffolds with different phase structures during simulated biodegradation in vitro. Materials Science and Engineering C-Materials for Biological Applications, 2019, vol. 100, no. 1, p. 544-553. ISSN: 0928-4931.Detail | WWW
ZEMÁNEK, M.; PŘIBYL, R.; KELAR, J.; PAZDERKA, M.; ŠŤASTNÝ, P.; KÚDELČÍK, J.; TRUNEC, M.; ČERNÁK, M. Electrical properties of alumina-based ceramic barrier layers for dielectric barrier discharge. Plasma Sources Science and Technology, 2019, vol. 28, no. 7, p. 075001-075001. ISSN: 1361-6595.Detail | WWW
VOJTOVÁ, L.; MICHLOVSKÁ, L.; VALOVÁ, K.; ZBONČÁK, M.; TRUNEC, M.; ČÁSTKOVÁ, K.; KRTIČKA, M.; PAVLIŇÁKOVÁ, V.; POLÁČEK, P.; DZUROV, M.; LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; SUCHÝ, T.; SEDLÁČEK, R.; GINEBRA, M.; MONTUFAR JIMENEZ, E. The Effect of the Thermosensitive Biodegradable PLGA–PEG–PLGA Copolymer on the Rheological, Structural and Mechanical Properties of Thixotropic Self-Hardening Tricalcium Phosphate Cement. International Journal of Molecular Sciences, 2019, vol. 20, no. 2, p. 1-21. ISSN: 1422-0067.Detail | WWW | Full text in the Digital Library
2018
VOJTOVÁ, L.; PAVLIŇÁKOVÁ, V.; BRTNÍKOVÁ, J.; KLIEŠTIKOVÁ, N.; ŠŤASTNÝ, P.; TRUNEC, M.; POLÁČEK, P.; BLAHNOVÁ, V.; FILOVA, E. Vliv biokeramických částic na morfologické, biomechanické a biologické vlastnosti 3D kolagen-kompozitních nosičů pro tkáňové inženýrství kostí. Bioimplantologie 2018 - sborník abstrakt. Barbara Kubešová, Daniel Lysák, Tomáš Suchý, Petr Vališ, Lucie Vištejnová, Lucy Vojtová. Brno: České vysoké učení technické v Praze, 2018. p. 37-37. ISBN: 978-80-01-06425-2.Detail
LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; ŠŤASTNÝ, P.; SEDLÁČEK, R.; VOJTOVÁ, L.; TRUNEC, M. Testování porézních keramik pro kostní tkánové inženýrství. Bioimplantologie 2018 - sborník abstrakt. Barbara Kubešová, Daniel Lysák, Tomáš Suchý, Petr Vališ, Lucie Vištejnová, Lucy Vojtová. Brno: České vysoké učení technické v Praze, 2018. p. 46-46. ISBN: 978-80-01-06425-2.Detail
ŠŤASTNÝ, P.; TRUNEC, M.; MAN, O.; LUKÁŠOVÁ, V.; SEDLÁČEK, R. Strength degradation, phase and morphological changes of calcium phosphate scaffolds in acidic environment simulating osteoclastic activity. 2018. p. 625-625. Detail | WWW
SEDLÁČEK, R.; SUCHÝ, T.; VONDROVÁ, J.; LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; TRUNEC, M.; ŠŤASTNÝ, P.; VOJTOVÁ, L.; KRTIČKA, M. Mechanické vlastnosti porézních keramických materiálů - mez pevnosti v tlaku. Bioimplantologie 2018 - sborník abstrakt. Barbara Kubešová, Daniel Lysák, Tomáš Suchý, Petr Vališ, Lucie Vištejnová, Lucy Vojtová. Brno: České vysoké učení technické v Praze, 2018. p. 51-51. ISBN: 978-80-01-06425-2.Detail
BRTNÍKOVÁ, J.; PAVLIŇÁKOVÁ, V.; ŠŤASTNÝ, P.; TRUNEC, M.; POLÁČEK, P.; BLAHNOVÁ, V.; FILOVA, E.; VOJTOVÁ, L. Collagen-phosphate porous scaffolds for novel bone tissue engineering concept. International Journal of Applied Science-Research and Review. London, UK: iMedPub LTD, 2018. p. 29-29. ISSN: 2394-9988.Detail
ŠŤASTNÝ, P.; TRUNEC, M.; SEDLÁČEK, R. STRENGTH DEGRADATION OF CALCIUM PHOSPHATE SCAFFOLDS UNDER CONDITIONS SIMULATING OSTEOCLASTIC RESORPTION. Proceedings of the workshop for young ceramists. Bologna: Editrice La Mandragora s.r.l, 2018. p. 49-52. ISBN: 978-88-7586-599-3.Detail
KAŠTYL, J.; POUCHLÝ, V.; TRUNEC, M. Co-extrusion of zirconia core-shell rods with controlled porosity in the core. Processing and Application of Ceramics, 2018, vol. 12, no. 3, p. 231-240. ISSN: 1820-6131.Detail | WWW | Full text in the Digital Library
ŠŤASTNÝ, P.; CHLUP, Z.; KALASOVÁ, D.; ZIKMUND, T.; KAISER, J.; TRUNEC, M. Epoxy-based gelcasting of machinable hydroxyapatite foams for medical applications. Journal of the American Ceramic Society, 2018, vol. 101, no. 8, p. 3317-3327. ISSN: 0002-7820.Detail | WWW
VOJTOVÁ, L.; KRTIČKA, M.; TRUNEC, M.; ŠŤASTNÝ, P.; DORAZILOVÁ, J.; BRTNÍKOVÁ, J.; KAISER, J.; ZIKMUND, T.; BŘÍNEK, A.; POŘÍZKA, P.; LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; SUCHÝ, T.; SEDLÁČEK, R.; GÖPFERT, E.; FALDYNA, M.; BILIK, A.; KREN, L.; NEKUDA, V.; PLÁNKA, L. Intervertebral spinal fusion with hybrid biodegradable nanocomposite porous implant: Pre-clinical study. International Journal of Applied Science-Research and Review. London, UK: iMedPub LTD, 2018. p. 27-27. ISSN: 2394-9988.Detail | WWW
2017
TRUNEC, M.; CHLUP, Z. Subtractive manufacturing of customized hydroxyapatite scaffolds for bone, regeneration. Ceramics International, 2017, vol. 43, no. 14, p. 11265-11273. ISSN: 0272-8842.Detail | WWW
KAŠTYL, J.; CHLUP, Z.; CLEMENS, F.; TRUNEC, M. Mechanical properties of zirconia core-shell rods with porous core and dense shell prepared by thermoplastic co-extrusion. Journal of the European Ceramic Society, 2017, vol. 37, no. 6, p. 2435-2443. ISSN: 0955-2219.Detail | WWW
ŠŤASTNÝ, P.; TRUNEC, M. Customized porous calcium phosphate scaffolds prepared by epoxy-based gel-casting method. Book of abstracts, 12th conference for young scientists in ceramics. University of Technology, University of Novi Sad, Serbia: FUTURA, Petrovaradin, Serbia, 2017. p. 52-52. ISBN: 978-86-6253-082-0.Detail
CHAMRADOVÁ, I.; TRUNEC, M.; KRTIČKA, M.; NEKUDA, V.; ZBONČÁK, M.; MICHLOVSKÁ, L.; MONTUFAR JIMENEZ, E.; VOJTOVÁ, L. Samovytvrzovací polymer-kompozitní adhezivum využitelné při léčbě kostních zlomenin. Brno: Symma s.r.o., 2017. p. 44-44. Detail | WWW
KALASOVÁ, D.; ZIKMUND, T.; ŠŤASTNÝ, P.; TRUNEC, M.; KAISER, J. Determination of porosity from tomographic data of hydroxyapatite scaffold-like structures. Czech chemical society symposium series. Praha: Czech chemical society, 2017. p. 12-13. ISSN: 2336-7202.Detail
NUZHNYY, D.; PETZELT, J.; BORODAVKA, F.; VANĚK, P.; ŠIMEK, D.; TRUNEC, M.; MACA, K. Effective infrared reflectivity and dielectric function of polycrystalline alumina ceramics. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2017, vol. 254, no. 5, p. 1-8. ISSN: 0370-1972.Detail | WWW
BLAHNOVÁ, V.; FILOVA, E.; PAVLIŇÁKOVÁ, V.; TRUNEC, M.; VOJTOVÁ, L.; AMLER, E. Pěnový nosič pro indukci osteogenní diferenciace lidských mezenchymálních kmenových buněk. Brno: Symma s.r.o., 2017. p. 46-46. Detail
ŠŤASTNÝ, P.; TRUNEC, M.; KALASOVÁ, D.; CHLUP, Z.; ZIKMUND, T. Machinable porous hydroxyapatite scaffolds prepared by gel-casting method using an epoxide as a gelling agent. CEITEC PHD RETREAT II. První. Published by Masaryk University, Brno, Czech Republic: 2017. p. 108-108. ISBN: 9778-80-210-8550-3.Detail
2016
TRUNEC, M.; POUCHLÝ, V. Colloidal processing of low-concentrated zirconia nanosuspension using osmotic consolidation. Ceramics International, 2016, vol. 42, no. 10, p. 11838-11843. ISSN: 0272-8842.Detail | WWW
ŠŤASTNÝ, P.; TRUNEC, M. Machinable porous hydroxyapatite scaffolds prepared by gelcasting, method using an epoxide as a gelling agent. In MULTI- SCALE DESIGN OF ADVANCED MATERIALS CONFERENCE PROCEEDINGS. 2016. p. 70-78. ISBN: 978-80-214-5358- 6.Detail
TRUNEC, M.; KLIMKE, J.; SHEN, Z. Transparent alumina ceramics densified by a combinational approach of spark plasma sintering and hot isostatic pressing. Journal of the European Ceramic Society, 2016, vol. 36, no. 16, p. 4333-4337. ISSN: 0955-2219.Detail | WWW
2015
TRUNEC, M.; MACA, K.; CHMELÍK, R. Polycrystalline alumina ceramics doped with nanoparticles for increased transparency. Journal of the European Ceramic Society, 2015, vol. 35, no. 3, p. 1001-1009. ISSN: 0955-2219.Detail
KAŠTYL, J.; CHLUP, Z.; CLEMENS, F.; TRUNEC, M. Ceramic core–shell composites with modified mechanical properties prepared by thermoplastic co-extrusion. Journal of the European Ceramic Society, 2015, vol. 35, no. 10, p. 2873-2881. ISSN: 0955-2219.Detail
KAŠTYL, J.; TRUNEC, M. Rheology of ceramic suspensions for thermoplastic co-extrusion. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS. 2015. p. 106-114. ISBN: 978-80-214-5146-9.Detail
2014
TRUNEC, M.; MACA, K. Advanced Ceramic Processes. In Advanced Ceramics for Dentistry. 225 Wyman Street, Waltham, MA 02451, USA: Butterworth- Heinemann, 2014. p. 123-150. ISBN: 978-0-12-394619- 5.Detail | WWW
TRUNEC, M.; BERA, O. Transparent Tetragonal Zirconia Ceramics by Colloidal Processing of Nanoparticle Suspension. In 13th International Ceramics Congress - Part A. Advances in Science and Technology. Advances in Science and Technology. Zurich, Switzerland: Trans Tech Publication, 2014. p. 85-90. ISBN: 978-3-03835-299- 0. ISSN: 1662- 0356.Detail | WWW
TRUNEC, M.; MIŠÁK, J. Consolidation of nanoparticle suspensions by centrifugation in non-porous moulds. Ceramics International, 2014, vol. 40, no. 6, p. 7775-7782. ISSN: 0272-8842.Detail
2013
TRUNEC, M.; ČÁSTKOVÁ, K.; ROUPCOVÁ, P. Effect of Phase Structure on Sintering Behavior of Zirconia Nanopowders. Journal of the American Ceramic Society, 2013, vol. 96, no. 12, p. 3720-3727. ISSN: 0002- 7820.Detail
2012
DE HAZAN, Y.; THANERT, M.; TRUNEC, M.; MIŠÁK, J. Robotic deposition of 3d nanocomposite and ceramic fiber architectures via UV curable colloidal inks. Journal of the European Ceramic Society, 2012, vol. 32, no. 6, p. 1187-1198. ISSN: 0955- 2219.Detail
BERA, O.; TRUNEC, M. Oscillatory shear rheology of polystyrene melts filled with carbon black and fullerene. PLASTICS RUBBER AND COMPOSITES, 2012, vol. 41, no. 9, p. 384-389. ISSN: 1465-8011.Detail
BERA, O.; TRUNEC, M. Optimization of Fine Alumina Gelcasting Using In Situ Dynamic Rheology. Journal of the American Ceramic Society, 2012, vol. 95, no. 9, p. 2849-2856. ISSN: 0002-7820.Detail
2011
KLIMKE, J.; TRUNEC, M.; KRELL, A. Transparent Tetragonal Yttria-Stabilized Zirconia Ceramic: Influence of Scattering Caused by Birefringence. Journal of the American Ceramic Society, 2011, vol. 94, no. 6, p. 1850-1858. ISSN: 0002- 7820.Detail
TRUNEC, M. Osmotic drying of gelcast bodies in liquid desiccant. Journal of the European Ceramic Society, 2011, vol. 31, no. 14, p. 2519-2524. ISSN: 0955- 2219.Detail
2009
TRUNEC, M.; CHLUP, Z. Higher fracture toughness of tetragonal zirconia ceramics through nanocrystalline structure. SCRIPTA MATERIALIA, 2009, vol. 61, no. 1, p. 56-59. ISSN: 1359- 6462.Detail
2008
TRUNEC, M.; MACA, K.; SHEN, Z. Warm pressing of zirconia nanoparticles by the spark plasma sintering technique. SCRIPTA MATERIALIA, 2008, vol. 59, no. 1, p. 23-26. ISSN: 1359- 6462.Detail
TRUNEC, M. Effect of grain size on mechanical properties of 3Y- TZP ceramics. Ceramics- Silikáty, 2008, vol. 52, no. 3, p. 165-171. ISSN: 0862- 5468.Detail
2007
TRUNEC, M.; MACA, K. Processing and properties of nanocrystalline tetragonal zirconia. Key Engineering Materials (print), 2007, vol. 336- 338, no. 4, p. 2300-2303. ISSN: 1013- 9826.Detail | WWW
MACA, K.; TRUNEC, M.; CHMELÍK, R. Processing and properties of fine- grained transparent MgAl2O4 ceramics. Ceramics- Silikáty, 2007, vol. 51, no. 2, p. 94-97. ISSN: 0862- 5468.Detail
TRUNEC, M.; MACA, K. Compaction and Pressureless Sintering of Zirconia Nanoparticles. Journal of the American Ceramic Society, 2007, vol. 90, no. 9, p. 2735-2740. ISSN: 0002- 7820.Detail
2006
CIHLÁŘ, J.; TRUNEC, M. Vodivé keramické materiály pro elektrochemické a energetické aplikace. Sklář a keramik, 2006, vol. 56, no. 12, p. 327-330. ISSN: 0037- 637X.Detail
TRUNEC, M.; CIHLÁŘ, J.; DIETHELM, S.; VAN HERLE, J. Tubular La0.7Ca0.3Fe0.85Co0.15O3-d Perovskite Membranes, Part II: Performance and Stability. Journal of the American Ceramic Society, 2006, vol. 89, no. 3, p. 955-959. ISSN: 0002- 7820.Detail
2005
TRUNEC, M.; HRAZDĚRA, J. Effect of ceramic nanopowders on rheology of thermoplastic suspensions. Ceramics International, 2005, vol. 31, no. 6, p. 845 ( p.)ISSN: 0272- 8842.Detail
MACA, K.; TRUNEC, M. Sintering kinetics of zirconia nanoparticle compacts. In Sintering 95. Grenoble: INP Grenoble, 2005. p. 29-32. Detail
K. Maca, M. Trunec and P. Dobsak. Bulk Zirconia Nanoceramics Prepared by Cold Isostatic Pressing and Pressureless Sintering. Reviews on Advanced Materials Science, 2005, vol. 10, no. 1, p. 84 ( p.)ISSN: 1606- 5131.Detail
2004
TRUNEC, M. Fabrication of zirconia- and ceria-based thin- wall tubes by thermoplastic extrusion. Journal of the European Ceramic Society, 2004, vol. 24, no. 4, p. 645 ( p.)ISSN: 0955- 2219.Detail
TRUNEC, M. Nové technologie tvarování pokročilé keramiky, její možnosti a rizika. Silikátový zpravodaj, 2004, vol. 2004, no. 1, p. 14 ( p.)ISSN: 1212- 3188.Detail
MACA, K., TRUNEC, M., DOBŠÁK, P. Cold isostatic pressing and sintering of alumina and zirconia nanoceramics. In Proceedings of the International Conference NAN0 ' 04. Brno: VUTIUM, 2004. p. 91 ( p.)ISBN: 80-214-2793- 0.Detail
2003
MACA, K., TRUNEC, M., DOBŠÁK, P., ŠVEJCAR, J. Sintering of bulk zirconia nanoceramics. Reviews on Advanced Materials Science, 2003, vol. 5, no. 3, p. 183 ( p.)ISSN: 1606- 5131.Detail
TRUNEC, M.; MACA, K.; DOBŠÁK, P. Compaction and sintering of bulk zirconia and ceria nanoceramics. In Tenth annual international conference on composites/ nano engineering. New Orleans: International Community for Composuites Engineering, 2003. p. 735 ( p.)Detail
DOBŠÁK, P., MACA, K., TRUNEC, M. Sintering of alumina and zirconia nanoceramics. In School of Ceramics, V Students' meeting. Novi Sad: Faculty of Technology, University of Novi Sad, 2003. p. 38 ( p.)ISBN: 86-80995-46- 0.Detail
2002
TRUNEC, M.; MACA, K.; DOBŠÁK, P. Tvarování a slinování pokročilé nanokrystalické keramiky. In Nano' 02 National Conference. Ostrava: Repronis Ostrava, 2002. p. 253 ( p.)ISBN: 80-7329-027- 8.Detail
TRUNEC, M.; CIHLÁŘ, J. Effect of debinding conditions on thermal removal of multicomponent binder from injection moulded ceramics. In SHAPING II Proceedings of the International Conference on Shaping of Advanced Ceramics. Mol, Belgie: Flemish Institute for Technological Research (VITO), 2002. p. 327 ( p.)ISBN: 90-5857-004- 5.Detail
TRUNEC, M.; CIHLÁŘ, J. Thermal removal of multicomponent binder from ceramic injection mouldings. Journal of the European Ceramic Society, 2002, vol. 22, no. 13, p. 2231-2241. ISSN: 0955- 2219.Detail
MACA, K., TRUNEC, M., CIHLÁŘ, J. Injection Moulding and Sintering of Ceria Ceramics. Ceramics International, 2002, vol. 28, no. 3, p. 337 ( p.)ISSN: 0272- 8842.Detail
2001
TRUNEC, M.; CIHLÁŘ, J. Effect of Activated Carbon Bed on Binder Removal from Ceramic Injection Moldings. Journal of the American Ceramic Society, 2001, vol. 84, no. 3, p. 675 ( p.)ISSN: 0002- 7820.Detail
2000
TRUNEC, M.; DOBŠÁK, P.; CIHLÁŘ, J. Effect of powder treatment on injection moulded zirconia ceramics. Journal of the European Ceramic Society, 2000, vol. 20, no. 7, p. 859 ( p.)ISSN: 0955- 2219.Detail
1998
TRUNEC, M.; CIHLÁŘ, J. Tvarování keramických suspenzí injekčním vstřikováním. Sklář a keramik, 1998, vol. 48, no. 3, p. 49 ( p.)ISSN: 0037- 637X.Detail
1997
TRUNEC, M.; CIHLÁŘ, J. Removal of Thermoplastic Binders from Ceramic Green Bodies. Ceramics- Silikáty, 1997, vol. 41, no. 2, p. 67 ( p.)ISSN: 0862- 5468.Detail
TRUNEC, M.; CIHLÁŘ, J. Thermal Debinding of Injection Moulded Ceramics. Journal of the European Ceramic Society, 1997, vol. 17, no. 2- 3, p. 203 ( p.)ISSN: 0955- 2219.Detail
1996
TRUNEC, M. Vstřikování keramiky. Plasty a kaučuk, 1996, vol. 33, no. 8, p. 231 ( p.)ISSN: 0322- 7340.Detail
1995
TRUNEC, M., CIHLÁŘ, J. Injection Moulding of Alumina Bioceramics. In Materials in Clinical Applications. Florencie, Itálie: Techna Srl., 1995. p. 99 ( p.)ISBN: 88-86538- 0.Detail
*) Publications are generated once a 24 hours.