Přístupnostní navigace
E-application
Search Search Close
prof. Ing.
Ph.D.
FME, ISMMB DEM – Professor
Pavel.Hutar@vut.cz
Send BUT message
2023
TRÁVNÍČEK, L.; PODUŠKA, J.; KUČERA, J.; NÁHLÍK, L.; HUTAŘ, P. Comparison of fatigue performance of polyethylene pipe grades in the form of extruded and compression molded specimens. Procedia Structural Integrity, 2023, vol. 43, no. 1, p. 148-153. ISSN: 2452-3216.Detail | WWW | Full text in the Digital Library
TRÁVNÍČEK, L.; PODUŠKA, J.; MESSIHA, M.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L.; HUTAŘ, P. Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes. Engineering Fracture Mechanics, 2023, vol. 289, no. 1 September 2023, ISSN: 0013-7944.Detail | WWW
KOZÁKOVÁ, K.; TRÁVNÍČEK, L.; KLUSÁK, J.; PODUŠKA, J.; HUTAŘ, P. The Influence of Different Notches on Fatigue Lifetime of Round Bar Specimens Made of HDPE. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2023, vol. 23, no. 3, p. 1-4. ISSN: 1804-4824.Detail | WWW
KUBÍČEK, R.; VOJTEK, T.; POKORNÝ, P.; HUTAŘ, P. Sensitivity of numerically modelled crack closure to material. Procedia Structural Integrity, 2023, vol. 42, no. 1, p. 911-918. ISSN: 2452-3216.Detail | WWW | Full text in the Digital Library
2022
DLHÝ, P.; PODUŠKA, J.; POKORNÝ, P.; JAMBOR, M.; NÁHLÍK, L.; KAJÁNEK, D.; FAJKOŠ, R.; HUTAŘ, P. Estimation of residual stress distribution in railway axles. ENGINEERING FAILURE ANALYSIS, 2022, vol. 135, no. 1, p. 106142-1 (106142-15 p.)ISSN: 1873-1961.Detail | WWW
KUBÍČEK, R.; OPLT, T.; VOJTEK, T.; NÁHLÍK, L.; HUTAŘ, P. Crack Front Shape Based on Plastic Component of CTOD. 23rd International Scientific Conference APPLIED MECHANICS 2022 – Book of Abstracts. first. Prague: Czech Technical University in Prague, 2022. p. 61-64. ISBN: 978-80-01-06974-5.Detail | WWW
SLÁVIK, O.; VOJTEK, T.; POCZKLÁN, L.; TINOCO NAVARRO, H.; KRUML, T.; HUTAŘ, P.; ŠMÍD, M. Improved description of low-cycle fatigue behaviour of 316L steel under axial, torsional and combined loading using plastic J-integral. Theoretical and Applied Fracture Mechanics, 2022, no. 118, p. 100-112. ISSN: 0167-8442.Detail | WWW
DLHÝ, P.; PODUŠKA, J.; POKORNÝ, P.; JAMBOR, M.; NÁHLÍK, L.; HUTAŘ, P. Residual stress determination by the layer removal and X-ray diffraction measurement correction method. MethodsX, 2022, vol. 2022, no. 9, p. 101768-1 (101768-15 p.)ISSN: 2215-0161.Detail | WWW
TINOCO NAVARRO, H.; FINTOVÁ, S.; HERRERO, D.; DLOUHÝ, I.; HUTAŘ, P. Experimental and numerical study of micromechanical damage induced by MnS-based inclusions. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROST, 2022, vol. 856, no. 144009, ISSN: 1873-4936.Detail | WWW
VOJTEK, T.; KUBÍČEK, R.; POKORNÝ, P.; JAMBOR, M.; HUTAŘ, P. CONCEPTUAL PROBLEMS WITH FATIGUE CRACK CLOSURE AND PLASTICITY: INFLUENCE OF CYCLIC SOFTENING. Sixth IJFatigue & FFEMS Joint Workshop Characterisation of Crack/Notch Tip Fields under Static, Dynamic or Cyclic loading - Book of Abstracts. Zagreb: University of Zagreb, 2022. p. 32-32. ISBN: 978-953-7738-83-9.Detail
2021
TINOCO NAVARRO, H.; HUTAŘ, P.; KRUML, T.; HOLZER, J. Modeling of elastoplastic behavior of freestanding square thin films under bulge testing. ACTA MECHANICA, 2021, vol. 232, no. 7, p. 2715-2731. ISSN: 0001-5970.Detail | WWW
Tinoco, H.A.; Holzer, J.; Pikálek, T.; Sobota, J.; Fort, T.; Matejka, M.; Kruml, T.; Hutar, P. Determination of the yield stress in Al thin film by applying bulge test. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. 2021. p. 1-10. ISSN: 1742-6588.Detail | WWW
DLHÝ, P.; PODUŠKA, J.; BERER, M.; GOSCH, A.; SLÁVIK, O.; NÁHLÍK, L.; HUTAŘ, P. Crack Propagation Analysis of Compression Loaded Rolling Elements. Materials, 2021, vol. 14, no. 10, p. 2656-1 (2656-24 p.)ISSN: 1996-1944.Detail | WWW | Full text in the Digital Library
TRÁVNÍČEK, L.; KUBĚNA, I.; MAZÁNOVÁ, V.; VOJTEK, T.; POLÁK, J.; HUTAŘ, P.; ŠMÍD, M. Advantageous Description of Short Fatigue Crack Growth Rates in Austenitic Stainless Steels with Distinct Properties. Metals, 2021, vol. 11, no. 3, p. 1-20. ISSN: 2075-4701.Detail | WWW | Full text in the Digital Library
GOSCH, A.; ARBEITER, F.; BERER, M.; VOJTEK, T.; HUTAŘ, P.; PINTER, G. Fatigue characterization of polyethylene under mixed mode I/III conditions. INTERNATIONAL JOURNAL OF FATIGUE, 2021, vol. 145, no. 1, p. 1-13. ISSN: 1879-3452.Detail | WWW | Full text in the Digital Library
FINTOVÁ, S.; DLHÝ, P.; KATEŘINA, M.; CHLUP, Z.; DUCHEK, M.; PROCHÁZKA, R.; HUTAŘ, P. Fatigue properties of UFG Ti grade 2 dental implant vs. conventionally tested smooth specimens. Journal of the Mechanical Behavior of Biomedical Materials, 2021, vol. 123, no. 1, p. 104715-1 (104715-12 p.)ISSN: 1878-0180.Detail | WWW
POKORNÝ, P.; VOJTEK, T.; JAMBOR, M.; NÁHLÍK, L.; HUTAŘ, P. Effect of Underload Cycles on Oxide-Induced Crack Closure Development in Cr-Mo Low-Alloy Steel. Materials, 2021, vol. 14, no. 10, p. 1-22. ISSN: 1996-1944.Detail | WWW | Full text in the Digital Library
2020
GOSCH, A.; BERER, M.; HUTAŘ, P.; SLÁVIK, O.; VOJTEK, T.; ARBEITER, F.; PINTER, G. Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene. INTERNATIONAL JOURNAL OF FATIGUE, 2020, no. 130, p. 1-11. ISSN: 0142-1123.Detail | WWW
VOJTEK, T.; POKORNÝ, P.; OPLT, T.; JAMBOR, M.; NÁHLÍK, L.; HERRERO, D.; HUTAŘ, P. Classically determined effective Delta K fails to quantify crack growth rates. Theoretical and Applied Fracture Mechanics, 2020, vol. 108, no. 1, p. 1-13. ISSN: 0167-8442.Detail | WWW | Full text in the Digital Library
POKORNÝ, P.; DLHÝ, P.; PODUŠKA, J.; FAJKOŠ, R.; VOJTEK, T.; NÁHLÍK, L.; GRASSO, M.; HUTAŘ, P. Influence of heat treatment-induced residual stress on residual fatigue life of railway axles. Theoretical and Applied Fracture Mechanics, 2020, vol. 109, no. 1, p. 1-13. ISSN: 0167-8442.Detail | WWW
ARBEITER, F.; TRÁVNÍČEK, L.; PETERSMANN, S.; DLHÝ, P.; SPOERK, M.; PINTER, G.; HUTAŘ, P. Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing. Additive Manufacturing, 2020, vol. 36, no. 1, p. 101730-1 (101730-11 p.)ISSN: 2214-7810.Detail | WWW
SLÁVIK, O.; HUTAŘ, P.; GOSCH, A.; BERER, M.; VOJTEK, T.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L. Fatigue crack propagation under mixed mode I and III in polyoxymethelene homopolymer. In Key Engineering Materials. Key Engineering Materials (print). Scientific.Net, 2020. p. 404-409. ISBN: 9783035715866. ISSN: 1013-9826.Detail | WWW
OPLT, T.; HUTAŘ, P.; POKORNÝ, P.; NÁHLÍK, L.; BERTO, F. Numerical evaluation of plasticity induced crack closure in 3D structures. Procedia Structural Integrity, 2020, vol. 23, no. -, p. 101-106. ISSN: 2452-3216.Detail | WWW
PODUŠKA, J.; DLHÝ, P.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; NÁHLÍK, L. Design of plastic pipes considering content of recycled material. Procedia Structural Integrity, 2020, vol. 23, no. 2019, p. 293-298. ISSN: 2452-3216.Detail | WWW
HORNÍK, V.; FINTOVÁ, S.; ŠMÍD, M.; HUTAŘ, P.; HRBÁČEK, K.; KUNZ, L. Interaction of fatigue and creep in MAR-M 247 superalloy. Procedia Structural Integrity, 2020, vol. 23, no. 1, p. 197-202. ISSN: 2452-3216.Detail | WWW | Full text in the Digital Library
HORNÍK, V.; FINTOVÁ, S.; ŠMÍD, M.; HUTAŘ, P.; HRBÁČEK, K.; KUNZ, L. Fatigue properties of B1914 superalloy at high temperatures. Procedia Structural Integrity, 2020, vol. 23, no. 1, p. 191-196. ISSN: 2452-3216.Detail | WWW | Full text in the Digital Library
HUTAŘ, P.; OPLT, T.; JAMBOR, M.; NÁHLÍK, L. Numerical simulations of semi-elliptical fatigue crack propagation. AIP conference proceedings, 2020, vol. 2309, no. -, p. 1-14. ISSN: 0094-243X.Detail | WWW
2019
OPLT, T.; ŠEBÍK, M.; BERTO, F.; NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P. Strategy of plasticity induced crack closure numerical evaluation. Theoretical and Applied Fracture Mechanics, 2019, vol. 102, no. 1, p. 59-69. ISSN: 0167-8442.Detail | WWW
PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Soil Load on Plastic Pipe and its Influence on Lifetime. Strojnícky časopis, 2019, vol. 69, no. 3, p. 101-106. ISSN: 0039-2472.Detail | WWW
PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; PINTER, G.; NÁHLÍK, L. Lifetime calculation of soil-loaded non-pressure polymer pipes. Key Engineering Materials (print), 2019, vol. 827, no. 2020, p. 141-146. ISSN: 1013-9826.Detail | WWW
TINOCO, H.A.; HUTAŘ, P.; MERLE, B.; GOKEM, M. KRUML, T. Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge tes. Key Engineering Materials (print), 2019, vol. 827, no. 1, p. 196-202. ISSN: 1013-9826.Detail | WWW
VOJTEK, T.; POKORNÝ, P.; NÁHLÍK, L.; HERRERO, D.; HUTAŘ, P. Crack Closure in the Near-threshold Region in Metallic Materials. Procedia Structural Integrity, 2019, vol. 23, no. 1, p. 481-486. ISSN: 2452-3216.Detail | WWW
VOJTEK, T.; POKORNÝ, P.; KUBĚNA, I.; NÁHLÍK, L.; FAJKOŠ, R.; HUTAŘ, P. Quantitative dependence of oxide-induced crack closure on air humidity for railway axle steel. INTERNATIONAL JOURNAL OF FATIGUE, 2019, vol. 123, no. 1, p. 213-224. ISSN: 1879-3452.Detail | WWW
TINOCO NAVARRO, H.; HOLZER, J.; PIKÁLEK, T.; BUCHTA, Z.; LAZAR, J.; CHLUPOVÁ, A.; KRUML, T.; HUTAŘ, P. Determination of elastic parameters of Si3N4 thin films by means of a numerical approach and bulge tests. Thin Solid Films, 2019, vol. 672, no. 1, p. 66-74. ISSN: 0040-6090.Detail | WWW
TINOCO NAVARRO, H.; CARDONA, C.; VOJTEK, T.; HUTAŘ, P. Finite Element Analysis of Crack-tip Opening Displacement and Plastic Zones Considering the Cyclic Material Behavior. Procedia Structural Integrity, 2019, vol. 23, no. 1, p. 529-534. ISSN: 2452-3216.Detail | WWW
DLHÝ, P.; PODUŠKA, J.; POKORNÝ, P.; NÁHLÍK, L.; FAJKOŠ, R.; HUTAŘ, P. Methodology for estimation of residual stresses in hardened railway axle. In Procedia Structural Integrity. Procedia Structural Integrity. 2019. p. 185-190. ISSN: 2452-3216.Detail
2018
NÁHLÍK, L.; MAJER, Z.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Lifetime Assessment of Particulate Ceramic Composite with Residual Stresses. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). Zürrich, Switzerland: Trans Tech Publications Inc., 2018. p. 107-110. ISBN: 978-3-0357-1168-4. ISSN: 1662-9795.Detail | WWW
ŠTEGNEROVÁ, K.; MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L. 3D Model of Crack Propagation in Particulate Ceramic Composite Containing Residual Stresses. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (print). Zürrich, Switzerland: Trans Tech Publications Inc., 2018. p. 103-106. ISBN: 9783035713503. ISSN: 1013-9826.Detail | WWW
OPLT, T.; HUTAŘ, P.; POKORNÝ, P.; NÁHLÍK, L.; CHLUP, Z.; BERTO, F. Effect of the free surface on the fatigue crack front curvature at high stress asymmetry. INTERNATIONAL JOURNAL OF FATIGUE, 2018, vol. 118, no. 2019, p. 249-261. ISSN: 0142-1123.Detail | WWW
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of critical applied stress for crack initiation from a sharp V-notch. Theoretical and Applied Fracture Mechanics, 2018, no. 93, p. 247-262. ISSN: 0167-8442.Detail
SLÁVIK, O.; HUTAŘ, P.; BERER, M.; GOSCH, A.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L. Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions. Key Engineering Materials (print), 2018, vol. 774, no. 2018, p. 325-330. ISSN: 1013-9826.Detail | WWW
PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry. Engineering Fracture Mechanics, 2018, vol. 203, no. 2018, p. 18-31. ISSN: 0013-7944.Detail | WWW
DLHÝ, P.; PODUŠKA, J.; NÁHLÍK, L.; BERER, M.; GOSCH, A.; PINTER, G.; HUTAŘ, P. Compression-Loaded Cracked Cylinder – Stress Intensity Factor Evaluation. Key Engineering Materials (print), 2018, vol. 774, no. 2018, p. 331-336. ISSN: 1013-9826.Detail | WWW
2017
HORNÍK, V.; ŠMÍD, M.; HUTAŘ, P.; KUNZ, L.; HRBÁČEK, K. Interaction of Creep and High Cycle Fatigue of IN 713LC Superalloy. Solid State Phenomena, 2017, vol. 258, no. 2017, p. 595-598. ISSN: 1012-0394.Detail | WWW
PODUŠKA, J.; HUTAŘ, P.; KUČERA, J.; SADÍLEK, J.; FRANK, A.; PINTER, G.; NÁHLÍK, L. The Effect of Residual Stress on the Process of Crack Growth Rate Determination in Polymer Pipes. Solid State Phenomena, 2017, vol. 258, no. 2017, p. 174-177. ISSN: 1012-0394.Detail | WWW
NEZBEDOVÁ, E.; PINTER, G.; FRANK, A.; HUTAŘ, P.; PODUŠKA, J.;HODAN, J. Accelerated Tests for Lifetime Prediction of PE- HD Pipe Grades. MACROMOLECULAR SYMPOSIA, 2017, vol. 373, no. 1, p. 188-195. ISSN: 1022-1360.Detail | WWW
MAJER, Z.; NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; BERMEJO, R. Study of Influence of Residual Stresses on Crack Propagation in Particulate Ceramic Composites. In MSMF8. International Conference on Materials Structure and Micromechanics of Fracture. Solid State Phenomena. 8. Zürrich, Switzerland: Trans Tech Publications Inc., 2017. p. 178-181. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.Detail | WWW
HUTAŘ, P.; PODUŠKA, J.; ŠMÍD, M.; KUBĚNA, I.; CHLUPOVÁ, A.; NÁHLÍK, L.; POLÁK, J.; KRUML, T. Short fatigue crack behaviour under low cycle fatigue regime. INTERNATIONAL JOURNAL OF FATIGUE, 2017, vol. 103, no. October 2017, p. 207-215. ISSN: 0142-1123.Detail | WWW
NÁHLÍK, L.; POKORNÝ, P.; ŠEVČÍK, M.; HUTAŘ, P. Influence of Initial Inclined Surface Crack on Estimated Residual Fatigue Lifetime of Railway Axle. Journal of Multiscale Modeling, 2017, vol. 7, no. 4, p. 1-6. ISSN: 1756-9737.Detail | WWW
OPLT, T.; POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. The Effect of the Free Surface on the Singular Stress Field at the Fatigue Crack Front. Journal of Mechanical Engineering - Strojnícky časopis, 2017, vol. 67, no. 2, p. 69-76. ISSN: 2450-5471.Detail | WWW | Full text in the Digital Library
KUNZ, L.; HORNÍK, V.; HUTAŘ, P.; FINTOVÁ, S. Initiation of fatigue cracks and lifetime of Ni-base superalloys at high mean stress and temperature. Procedia Structural Integrity, 2017, vol. 7, no. 1, p. 44-49. ISSN: 2452-3216.Detail | WWW
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; BERMEJO, R.; HUTAŘ, P. Influence of particle attributes on residual stresses in particulate ceramic composites. Solid State Phenomena, 2017, no. 258, p. 190-193. ISSN: 1012-0394.Detail
HUTAŘ, P.; POKORNÝ, P.; PODUŠKA, J.; FAJKOŠ, R.; NÁHLÍK, L. Effect of residual stresses on the fatigue lifetime of railway axle. Procedia Structural Integrity, 2017, vol. 4, no. 2017, p. 42-47. ISSN: 2452-3216.Detail | WWW
NÁHLÍK, L.; POKORNÝ, P.; FAJKOŠ, R.; HUTAŘ, P., ŠEVČÍK M., MATUŠEK P. Fatigue lifetime estimation of railway axles. ENGINEERING FAILURE ANALYSIS, 2017, vol. 2017, no. 73, p. 139-157. ISSN: 1350-6307.Detail | WWW
MAJER, Z.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; PLETZ, M.; BERMEJO, R.; NÁHLÍK, L. Residual Lifetime Determination of Low Temperature Co-Fired Ceramics. In Advances in Fracture and Damage Mechanics XV. Key Engineering Materials (web). Zürrich, Switzerland: Trans Tech Publications Inc., 2017. p. 266-269. ISBN: 978-3-03835-716-2. ISSN: 1662-9795.Detail | WWW
2016
MAJER, Z.; NÁHLÍK, L.; HUTAŘ, P. The Role of Residual Stresses in Particulate Composite with Glass Matrix. Key Engineering Materials (print), 2016, vol. 665, no. 1, p. 173-176. ISSN: 1013-9826.Detail | WWW
ŠMÍD, M.; HORNÍK, V.; HUTAŘ, P.; KUNZ, L.; HRBÁČEK, K. High Cycle Fatigue Damage Mechanisms of MAR-M 247 Superalloy at High Temperatures. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, vol. 69, no. 2, p. 393-397. ISSN: 0972-2815.Detail | WWW
MAJER, Z.; HUTAŘ, P.; FRANK, A.; ŠEVČÍK, M.; ZOUHAR, M.; PINTER, G.; NÁHLÍK, L. Point load effect on the buried polyolefin pipes lifetime. Polymer Engineering & Science, 2016, vol. 56, no. 1, p. 79-86. ISSN: 1548-2634.Detail | WWW
ŠMÍD, M.; HUTAŘ, P.; HORNÍK, V.; HRBÁČEK, K.; KUNZ, L. Stage I fatigue cracking in MAR-M 247 superalloy at elevated temperatures. Procedia Structural Integrity, 2016, vol. 2, no. 1, p. 3018-3025. ISSN: 2452-3216.Detail | WWW | Full text in the Digital Library
PODUŠKA, J.; HUTAŘ, P.; KUČERA, J.; FRANK, A.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Residual stress in polyethylene pipes. POLYMER TESTING, 2016, vol. 54, no. 1, p. 288-295. ISSN: 0142-9418.Detail | WWW
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Influence of variable stress ratio during train operation on residual fatigue lifetime of railway axles. Procedia Structural Integrity, 2016, vol. 2, no. 1, p. 3585-3592. ISSN: 2452-3216.Detail | WWW | Full text in the Digital Library
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P.; POKORNÝ, P.; MAJER, Z. Influence of residual stresses and particle properties on mechanical response of the material in particulate ceramic composites. Key Engineering Materials (print), 2016, vol. 1, no. 713, p. 212-215. ISSN: 1013-9826.Detail | WWW
NEZBEDOVÁ, E.; KRČMA, F.; MAJER, Z.; HUTAŘ, P. Effect of particles size on mechanical properties of polypropylene particulate composites. International Journal of Structural Integrity, 2016, vol. 7, no. 5, p. 690-699. ISSN: 1757-9864.Detail | WWW
POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Residual fatigue lifetime estimation of railway axles for various loading spectra. Theoretical and Applied Fracture Mechanics, 2016, no. 81, p. 25-32. ISSN: 0167-8442.Detail | WWW
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; MÁŠA, B.; HUTAŘ, P. A failure scenario of ceramic laminates with strong interfaces. Engineering Fracture Mechanics, 2016, no. 167, p. 56-67. ISSN: 0013-7944.Detail | WWW
POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Influence of extension of load spectrum on estimation of residual fatigue lifetime of railway axle. Solid State Phenomena, 2016, vol. 258, no. -, p. 607-610. ISSN: 1012-0394.Detail | WWW
HUTAŘ, P.; PODUŠKA, J.; CHLUPOVÁ, A.; ŠMÍD, M.; KRUML, T.; NÁHLÍK, L. Description of short fatigue crack propagation under low cycle fatigue regime. Procedia Structural Integrity, 2016, vol. 2, no. 1, p. 3010-3017. ISSN: 2452-3216.Detail | WWW | Full text in the Digital Library
2015
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Influence of the V-notch opening angle on critical applied force values Influence of the V-notch opening angle on critical applied force values for the crack initiation from the sharp V-notch. Key Engineering Materials (print), 2015, vol. 627, no. 2015, p. 165-168. ISSN: 1013-9826.Detail
MAJER, Z.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Point load effect determination for different pressure pipe SDR series. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2015. p. 373-376. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.Detail
PODUŠKA, J.; KUČERA, J.; HUTAŘ, P.; ŠEVČÍK, M.; KŘIVÁNEK, J.; SADÍLEK, J.; NÁHLÍK, L. The Effect of Specimen Size on the Determination of Residual Stress in Polymer Pipe Wall. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Key Engineering Materials. Switzerland: TTP, 2015. p. 141-144. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.Detail
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Influence of different crack propagation rate descriptions on the residual fatigue lifetime of railway axles. Key Engineering Materials (print), 2015, vol. 627, no. 627, p. 469-472. ISSN: 1013- 9826.Detail
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Fracture Mechanics Description of Crack Propagation in Ceramic Laminates. APPLIED MECHANICS 2015 – Book of Abstracts. Thákurova 1, Praha 6: Česká technika – Nakladatelství ČVUT, 2015. p. 69-70. ISBN: 978-80-01-05708- 7.Detail
HORNÍK, V.; ŠMÍD, M.; HUTAŘ, P.; KUNZ, L.; HRBÁČEK, K. Effect of different investment casting conditions on high cycle fatigue of MAR- M 247 superalloy at elevated temperatures. METAL 2015. Tanger Ltd., 2015. ISBN: 978-80-87294-58- 1.Detail
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Description of strengthening mechanism in layered ceramic composites. Key Engineering Materials (print), 2015, vol. XIV, no. 665, p. 93-96. ISSN: 1013-9826.Detail
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Estimation of crack behaviour in the ceramic laminate with strong interfaces. ICSMA 17 Book of Abstracts. Brno: Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Brno, Czech Republic, 2015. p. 288-288. ISBN: 978-80-87434-07- 9.Detail
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Influence of Threshold Values on Residual Fatigue Lifetime of Railway Axles under Variable Amplitude Loading. Procedia Engineering, 2015, vol. 101, no. 1, p. 380-385. ISSN: 1877-7058.Detail | WWW | Full text in the Digital Library
ŠMÍD, M.; HORNÍK, V.; HUTAŘ, P.; KUNZ, L.; HRBÁČEK, K.; JOCH, A. Vliv rozdílných podmínek přesného lití na vysokocyklovou únavu superslitiny MAR- M 247 při vysokých teplotách. Slévárenství, 2015, no. 9- 10, p. 340-344. ISSN: 0037- 6825.Detail
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of stepwise crack propagation in ceramic laminates with strong interfaces. Frattura ed Integrita Strutturale, 2015, vol. 9, no. 34, p. 116-124. ISSN: 1971-8993.Detail | WWW | Full text in the Digital Library
2014
MAJER, Z.; ZOUHAR, M.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Pressure pipe damage: Numerical estimation of point load effect II. In Advances in Fracture and Damage Mechanics XII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 533-536. ISBN: 978-3-03785-830-1. ISSN: 1013-9826.Detail
MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Estimation of Apparent Fracture Toughness of Alumina Based Ceramic Laminate. Key Engineering Materials (print), 2014, vol. 2014, no. 592- 593, p. 405-408. ISSN: 1013- 9826.Detail
MAJER, Z.; MARCIÁN, P.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 445-448. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.Detail
NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P.; MATUŠEK, P. Fatigue crack propagation in steels for railway axles. Key Engineering Materials (print), 2014, vol. 2014, no. 592- 593, p. 254-257. ISSN: 1013- 9826.Detail
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; MAJER, Z. Critical Value for Crack Propagation from Sharp V- notch. Key Engineering Materials (print), 2014, vol. 592- 593, no. 1, p. 177-180. ISSN: 1013- 9826.Detail
NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P. Influence of crack retardation on fatigue crack propagation in steels for railway axles. In 11th International Fatigue Congress. Zurich: 11th International Fatigue Congress, 2014. p. 351-356. ISBN: 978-3-03835-008- 8.Detail
MAJER, Z.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. Particulate Composite Damage: Numerical Estimation of Micro-Crack Paths. In Local Mechanical Properties X. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 261-264. ISBN: 978-3-03835-062-0. ISSN: 1013-9826.Detail
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. ESTIMATION OF CRITICAL STRESS VALUES FOR CRACK INITIATION FROM SHARP V-NOTCHES. In Engineering Mechanics 2014. 1. Brno: ÚMTMB, FSI VUT v Brně, 2014. p. 412-415. ISBN: 978-80-214-4871-1.Detail
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. The effect of threshold value on the residual fatigue lifetime of railway axles. In ENGINEERING MECHANICS 2014. 2014. p. 496-499. ISBN: 978-80-214-4871-1.Detail
POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Comparison of Different Load Spectra on Residual Fatigue Lifetime of Railway Axle. Procedia Engineering, 2014, vol. 74, no. 1, p. 313-316. ISSN: 1877-7058.Detail | WWW | Full text in the Digital Library
MAJER, Z.; PLETZ, M.; KRAUTGASSER, C.; NÁHLÍK, L.; HUTAŘ, P.; BERMEJO, R. Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites. Procedia Materials Science, 2014, vol. 3, no. 1, p. 2071-2076. ISSN: 2211-8128.Detail
PODUŠKA, J.; KUČERA, J.; HUTAŘ, P.; ŠEVČÍK, M.; KŘIVÁNEK, J.; SADÍLEK, J.; NÁHLÍK, L. Residual stress distribution in extruded polypropylene pipes. POLYMER TESTING, 2014, vol. 2014, no. 40, p. 88-98. ISSN: 0142-9418.Detail
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Critical applied stresses for a crack initiation from a sharp V-notch. Frattura ed Integrita Strutturale, 2014, vol. 8, no. 30, p. 55-61. ISSN: 1971-8993.Detail | WWW | Full text in the Digital Library
ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Crack initiation from sharp V- notch tip in the case of out of plane bended specimen. Plzeň: Katedra mechaniky Fakulty aplikovaných věd Západočeské univerzity v Plzni, 2014. p. 1-2. Detail
POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Fatigue crack propagation in railway axles. 2014. p. 1-2. Detail
2013
MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Numerical Modelling of Particulate Composite with a Hyperelastic Matrix. Key Engineering Materials (print), 2013, vol. 525- 526, no. xxx, p. 25-28. ISSN: 1013- 9826.Detail
ZOUHAR, M.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. Pressure pipe damage: Numerical estimation of point load effect. Key Engineering Materials (print), 2013, vol. 525- 526, no. 1, p. 177-180. ISSN: 1013- 9826.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; SEITL, S. The effect of constraint level on a crack path. ENGINEERING FAILURE ANALYSIS, 2013, vol. 2013 (29), no. 1, p. 83-92. ISSN: 1350- 6307.Detail
MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Particulate Composite Materials: Numerical Modelling of Cross- linked Polymer Reinforced by Alumina Based Particles. MECHANICS OF COMPOSITE MATERIALS, 2013, vol. 2013 (49), no. 4, p. 421-428. ISSN: 0191- 5665.Detail
HUTAŘ, P.; ZOUHAR, M.; NÁHLÍK, L.; ŠEVČÍK, M.; MÁŠA, B. Multilayer polymer pipes failure assessment based on a fracture mechanics approach. ENGINEERING FAILURE ANALYSIS, 2013, vol. 33, no. 1, p. 151-162. ISSN: 1350- 6307.Detail
ŠEVČÍK, M.; PODUŠKA, J.; NÁHLÍK, L.; HUTAŘ, P.; KUČERA, J. Inaccuracy in Residual Stress Estimation and Its Influence on the Residual Lifetime of Polymer Pipes. Key Engineering Materials (print), 2013, vol. 2013, no. 592- 593, p. 165-168. ISSN: 1013- 9826.Detail
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, J. Determination of the Effect of Interphase on Fracture Toughness and the Stiffness of a Polymer Particulate Composite. MECHANICS OF COMPOSITE MATERIALS, 2013, vol. 49, no. 5, p. 1-12. ISSN: 0191- 5665.Detail
POKORNÝ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; HUTAŘ, P. Effects of variable loading on residual fatigue life of the railway wheelset. Key Engineering Materials (print), 2013, vol. 2014, no. 577- 578, p. 121-124. ISSN: 1013- 9826.Detail
POKORNÝ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; HUTAŘ, P. DETERMINATION OF RESIDUAL FATIGUE LIFE OF RAILWAY WHEELSET. 15th International Conference, APPLIED MECHANICS 2013. 2013.Detail
PETRÁČKOVÁ, K.; NÁHLÍK, L.; TRUHLÁŘ, M.; KUBĚNA, I.; HUTAŘ, P. APPLICATION OF FEM TO ESTIMATE OF MECHANICAL PROPERTIES OF THIN LAYERS. 15th International Conference, APPLIED MECHANICS 2013. 2013.Detail
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of critical values for crack propagation from sharp V- notch. Plzeň: Západočeská univerzita, 2013. p. 1-2. Detail
NÁHLÍK, L.; MÁŠA, B.; HUTAŘ, P. INFLUENCE OF THE INTERFACE ON THE APPARENT FRACTURE TOUGHNESS AND CRACK PROPAGATION DIRECTION IN LAYERED CERAMIC COMPOSITES. 2013. p. 7837-7838. ISBN: 978-0-9696797-1- 4.Detail
2012
ŠEVČÍK, M.; HUTAŘ, P.; ZOUHAR, M.; NÁHLÍK, L. Numerical estimation of the fatigue crack front shape for a specimen with finite thickness. INTERNATIONAL JOURNAL OF FATIGUE, 2012, vol. 39, no. 1, p. 75-80. ISSN: 0142- 1123.Detail
HUTAŘ, P.; ŠEVČÍK, M.; ZOUHAR, M.; NÁHLÍK, L.; KUČERA, J. The effect of residual stresses on crack shape in polymer pipes. Proceedings of the 4th International Conference on CRACK PATHS (CP 2012), 2012, vol. 1, no. 1, p. 489-496. ISSN: 2281- 1060.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; LACH, R.; KNÉSL, Z.; GRELLMANN, W. Crack growth modeling in a specimen with polymer weld. Key Engineering Materials (print), 2012, vol. 488- 489, no. -, p. 158-161. ISSN: 1013- 9826.Detail
HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; KNÉSL, Z. Fatigue crack shape prediction based on the stress singularity exponent. Key Engineering Materials (print), 2012, vol. 488- 489, no. -, p. 178-181. ISSN: 1013- 9826.Detail
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Basic modes of crack propagation through an interface in polymer layered structure. Key Engineering Materials (print), 2012, vol. 488- 499, no. 9, p. 162-165. ISSN: 1013- 9826.Detail
MAJER, Z.; NÁHLÍK, L.; HUTAŘ, P. The Estimation of Micro- crack Behavior in Polymer Particulate Composite with Soft Interphase. Advanced Materials Research, 2012, vol. 482- 484, no. 1, p. 1660-1663. ISSN: 1022- 6680.Detail
NÁHLÍK, L.; HUTAŘ, P.; DUŠKOVÁ, M.; DUŠEK, K.; MÁŠA, B. Numerical estimation of the macroscopic stress- strain curve of a particulate composite with crosslinked polymer matrix. MECHANICS OF COMPOSITE MATERIALS, 2012, vol. 47, no. 6, p. 627-634. ISSN: 0191- 5665.Detail
HUTAŘ, P.; ZOUHAR, M.; NEZBEDOVÁ, E.; SADÍLEK, J.; ŽÍDEK, J.; NÁHLÍK, L.; KNÉSL, Z. Constraint effect on the slow crack growth in polyethylene. International Journal of Structural Integrity, 2012, vol. 3, no. 2, p. 118-126. ISSN: 1757- 9864.Detail
ŠEVČÍK, M.; ZOUHAR, M.; MÁŠA, B.; HUTAŘ, P.; NÁHLÍK, L. On a critical geometry of a crack arrested at a bimaterail interface. In Conference Proceedings of the 14th International Conference APPLIED MECHANICS. Plzeň: Západočeská univerzita v Plzni, 2012. p. 1-4. ISBN: 978-80-261-0097- 3.Detail
ŠEVČÍK, M.; HUTAŘ, P.; KNÉSL, Z.; NÁHLÍK, L.; ZOUHAR, M. Estimation of the critical configuration of a crack arrested at the interface between two materials. COMPUTATIONAL MATERIALS SCIENCE, 2012, vol. 64, no. 5, p. 225-228. ISSN: 0927- 0256.Detail
NEZBEDOVÁ, E.; HUTAŘ, P.; ZOUHAR, M.; KNÉSL, Z.; SADÍLEK, J.; NÁHLÍK, L. The applicability of the Pennsylvania Notch Test for a new generation of PE pipe grades. POLYMER TESTING, 2012, vol. 32, no. 1, p. 106-114. ISSN: 0142- 9418.Detail
ZOUHAR, M.; NÁHLÍK, L.; HUTAŘ, P.; ŠEVČÍK, M.; KNÉSL, Z. The effect of critical distance on stability conditions for a crack at the interface between two polymer materials. Engineering Mechanics, 2012, vol. 19, no. 2/ 3, p. 155-164. ISSN: 1802- 1484.Detail
ŠEVČÍK, M.; HUTAŘ, P.; ZOUHAR, M.; NÁHLÍK, L.; KNÉSL, Z.; KUČERA, J. A Simple Method for Estimation of Residual Stresses Influence on Plastic Pipes Lifetime Prediction. In Polymeric Materials 2012. 2012. p. 134-134. ISBN: 978-3-86829-517- 7.Detail
HUTAŘ, P.; ŠEVČÍK, M.; ZOUHAR, M.; NÁHLÍK, L.; KUČERA, J. The effect of residual stresses on crack shape in polymer pipes. The Fourth International Conference on Crack Paths 2012. 2012. p. 73-73. Detail
ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P.; ZOUHAR, M.; MÁŠA, B. Modelling of fatigue failure of gears with thin rim. 18th International Conference Engineering Mechanics 2012. 2012. p. 1309-1310. Detail
HUTAŘ, P.; ŠEVČÍK, M.; KUČERA, J.; ZOUHAR, M.; LUKY, R.; NÁHLÍK, L. Effect of the residual stresses on the slow crack growth. XVI International Plastic Pipes Conference 2012. 2012.Detail
NÁHLÍK, L.; MÁŠA, B.; HUTAŘ, P. Macroscopic Behavior and Damage of a Particulate Composite with a Crosslinked Polymer Matrix. In Mechanics and Properties of Composed Materials and Structures. 1. Berlín, Německo: Springer- Verlag Berlin Heidelberg, 2012. p. 117-127. ISBN: 978-3-642-31497- 1.Detail
NÁHLÍK, L.; HUTAŘ, P.; ŠEVČÍK, M.; MALÍKOVÁ, L. Determination of crack propagation direction using approach based on generalized linear elastic fracture. In The 4th International Conference on Crack Paths (CP2012). 2012. p. 1065-1072. ISBN: 9788895940441.Detail
MAJER, Z.; HUTAŘ, P. The Effect of Nonlinear Matrix on Crack Propagation in the Particulate Composite. Key Engineering Materials (print), 2012, vol. 488- 489, no. 1, p. 484-487. ISSN: 1013- 9826.Detail
2011
POSPÍŠILOVÁ, S.; KIANICOVÁ, M.; VLASÁK, T.; HUTAŘ, P.; PODRÁBSKÝ, T.; HAKL, J. The Microstructure Changes in IN713LC during the Creep Exposure. Advanced Materials Research, 2011, vol. 278, no. 1, p. 120-125. ISSN: 1022- 6680.Detail
MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Numerical Modelling of Damage of Particulate Composite with Polymer Matrix. In COMPUTATIONAL MECHANICS 2011, EXTENDED ABSTRACTS. 2011. p. 1-2. ISBN: 978-80-261-0027- 0.Detail
ZOUHAR, M.; VALLET, L.; HUTAŘ, P.; NÁHLÍK, L. Life time estimation of the multilayer plastic pipes. Key Engineering Materials (print), 2011, vol. 452- 453, no. -, p. 33-36. ISSN: 1013- 9826.Detail
NÁHLÍK, L.; MÁŠA, B.; HUTAŘ, P. Numerical Modeling of Macroscopic Behavior of Particulate Composite with Crosslinked Polymer Matrix. Key Engineering Materials, 2011, vol. 465, no. xxx, p. 129-132. ISSN: 1013- 9826.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The effect of polymer pipe weld geometry on creep lifetime. Key Engineering Materials (print), 2011, vol. 465, no. -, p. 175-178. ISSN: 1013-9826.Detail
HUTAŘ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; SEITL, S.; KRUML, T.; POLÁK, J. Fatigue crack propagation rate in EUROFER 97 estimated using small specimens. Key Engineering Materials (print), 2011, vol. 452- 453, no. -, p. 325-328. ISSN: 1013-9826.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Generalized linear elastic fracture mechanics: an application to a crack touching the bimaterial interface. Key Engineering Materials, 2011, vol. 452- 453, no. XXX, p. 445-448. ISSN: 1013- 9826.Detail
HUTAŘ, P.; NÁHLÍK, L.; MAJER, Z.; KNÉSL, Z. The effect of an interphase on micro- crack behaviour in polymer composites. In Computational Modelling and Advanced Simulations. Computational Methods in Applied Sciences. Dordrecht: Springer, 2011. p. 83-97. ISBN: 978-94-007-0316- 2.Detail
MAJER, Z.; KNÉSL, Z.; HUTAŘ, P. Crack Behaviour in Polymeric Composites: The Influence of Particle Shape. Key Engineering Materials, 2011, vol. 465, no. 1, p. 564-567. ISSN: 1013- 9826.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Crack behavior in a welded polyolefin pipe. MECHANICS OF COMPOSITE MATERIALS, 2011, vol. 47, no. 3, p. 263-270. ISSN: 0191-5665.Detail
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Effect of the time dependent material properties on the crack behaviour in the interface of two polymeric materials. MECHANICS OF COMPOSITE MATERIALS, 2011, vol. 47, no. 2, p. 203-210. ISSN: 0191- 5665.Detail
HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; PINTER, G.; FRANK, A.; MITEV, I. A numerical methodology for lifetime estimation of HDPE pressure pipes. Engineering Fracture Mechanics, 2011, vol. 78, no. 17, p. 3049-3058. ISSN: 0013-7944.Detail
ZOUHAR, M.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. The influence of point load on creep crack growth in polyethylene pipe. In Computational Mechanics 2011. Plzeň: University of West Bohemia Pilsen, 2011. p. 1-2. ISBN: 978-80-261-0027- 0.Detail
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; KNÉSL, Z. Crack stability condition at the interface between two polymer materials. In Applied mechanics 2011 conference proceedings. 2011. p. 247-250. ISBN: 978-80-87434-03- 1.Detail
HUTAŘ, P.; ZOUHAR, M.; ŠEVČÍK, M.; KNÉSL, Z.; NEZBEDOVÁ, E. Numerical assessment of the HDPE pipe lifetime. In 13. Tagung Problemseminar Deformation und Bruchverhalten von Kunstoffen. Merseburg: 2011. p. 153-159. ISBN: 978-3-86829-400- 2.Detail
ŠEVČÍK, M.; HUTAŘ, P.; KNÉSL, Z.; NEZBEDOVÁ, E.; LACH, R.; GRELLMANN, W. Fracture Mechanics Model of a Weld Bead. In 13. Tagung Problemseminar Deformation und Bruchverhalten von Kunstoffen. Merseburg: 2011. p. 570-573. ISBN: 978-3-86829-400- 2.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Assessment of crack behaviour in a polymer pipe weld. Computational Mechanics 2011 - extended abstract. Plzeň: Západočeská univerzita, 2011. p. 1-2. ISBN: 978-80-261-0027- 0.Detail
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Damage of multilayer polymer materials under creep loading. Key Engineering Materials, 2011, vol. 2011, no. 465, p. 153-156. ISSN: 1013- 9826.Detail
2010
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L. Vliv časově proměnných vlastností materiálů a způsobu zatěžování na lomové parametry bi-materiálového tělesa. In SEMDOK 2010, 15th International of PHD. students seminar. Žilina: 2010. p. 247-250. ISBN: 978-80-554-0157-7.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Stress distribution description in the vicinity of the crack front in the case of thin specimens. In 12th International Scientific Conference Applied Mechanics 2010. Liberec: TU Liberec, 2010. p. 119-122. ISBN: 978-80-7372-586-0.Detail
ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L. Crack propagation through the interface between two polymer materials. In Applied and Computational Mechanics - Extended Abstracts. University of West Bohemia, Plzeň: University of West Bohemia, 2010. p. 1-2. ISBN: 978-80-7043-919- 7.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Effect of the free surface on crack behaviour in cracked graded structures. In 26th conference Computational Mechanics 2010 - Extended Abstracts. University of West Bohemia, Plzeň: University of West Bohemia, Plzeň, 2010. p. 1-2. ISBN: 978-80-7043-919- 7.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Description of the stress distribution around the crack front in the case of thin structures. Bulletin of Applied Mechanics, 2010, vol. 6, no. 22, p. 30-33. ISSN: 1801-1217.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; BERMEJO, R. Prediction of crack propagation in layered ceramics with strong interfaces. Engineering Fracture Mechanics, 2010, vol. 77, no. 11, p. 2192-2199. ISSN: 0013- 7944.Detail
HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The effect of a free surface on fatigue crack behaviour. INTERNATIONAL JOURNAL OF FATIGUE, 2010, vol. 32, no. 8, p. 1265-1269. ISSN: 0142- 1123.Detail
HUTAŘ, P.; SEITL, S.; NÁHLÍK, L.; KNÉSL, Z. Fatigue crack propagation in thin structures. Key Engineering Materials, 2010, vol. 417- 418, no. xxx, p. 257-260. ISSN: 1013- 9826.Detail
HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; ZOUHAR, M.; SEITL, S.; KNÉSL, Z.; FERNÁNDEZ-CANTELI, A. Fracture mechanics of the three-dimensional crack front: vertex singularity versus out of plain constraint descriptions. Procedia Engineering, 2010, vol. 2, no. 1, p. 2095-2102. ISSN: 1877- 7058.Detail
2009
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Simulace šíření trhliny ve svaru polyolefínových trubek. In Víceúrovňový design pokrokových materiálů. Brno: 2009. p. 45-52. ISBN: 978-80-254-6070- 2.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Crack propagation in the vicinity of the interface between two elastic materials. In Damage and Fracture Mechanics. Failure Analysis of Engineering Materials and Structures. Dordrecht, Nizozemí: Springer, 2009. p. 255-264. ISBN: 978-90-481-2668- 2.Detail
HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; MITEV, I.; FRANK, A.; PINTER, G. Numerical simulation of the failure behavior of PE pressure pipes with additional loads. In 67th Annual Technical Conference of the Society of Plastics Engineers 2009, ANTEC 2009. United States: Society of Plastics Engineers, Inc., 2009. p. 2163-2168. ISBN: 1-61567-327- X.Detail
SEITL, S.; HUTAŘ, P.; VESELÝ, V.; KERŠNER, Z. T-stress values during fracture in wedge splitting test geometries: A numerical study. In Brittle Matrix Composites (BMC-9). warsawa, Polsko: 2009. p. 419-428. ISBN: 978-83-89687-48- 7.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of apparent fracture toughness of ceramic laminates. COMPUTATIONAL MATERIALS SCIENCE, 2009, vol. 46, no. 3, p. 614-620. ISSN: 0927- 0256.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. An evaluation of the stress intensity factor in functionally graded materials. Applied andComputational Mechanics, 2009, vol. 3, no. 2, p. 401-410. ISSN: 1802-680X.Detail
HUTAŘ, P.; MAJER, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; KNÉSL, Z. THE INFLUENCE OF PARTICLE SIZE ON THE FRACTURE TOUGHNESS OF PP- BASED PARTICLE COMPOSITE. MECHANICS OF COMPOSITE MATERIALS, 2009, vol. 45, no. 3, p. 281-286. ISSN: 0191- 5665.Detail
HUTAŘ, P.; ŠESTÁKOVÁ, L.; KNÉSL, Z.; NEZBEDOVÁ, E.; NÁHLÍK, L. Special fracture mechanics specimens for multilayer plastic pipes testing. POLYMER TESTING, 2009, vol. 28, no. 8, p. 785-792. ISSN: 0142- 9418.Detail
HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Quantification of the influence of vertex singularities on fatigue crack behavior. COMPUTATIONAL MATERIALS SCIENCE, 2009, vol. 45, no. 3, p. 653-657. ISSN: 0927- 0256.Detail
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Crack propagation in the vicinity of the interface in layered materials. Applied andComputational Mechanics, 2009, vol. III., no. 1., p. 195-204. ISSN: 1802-680X.Detail | WWW | Full text in the Digital Library
HUTAŘ, P.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; ŠEVČÍK, M.; KNÉSL, Z.; NEZBEDOVÁ, E. A fracture mechanics assessment of surface cracks existing in protective layers of multilayer composite pipes. COMPOSITE STRUCTURES, 2009, vol. 92, no. 5, p. 1120-1125. ISSN: 0263- 8223.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Crack behaviour in laminar ceramics with strong interfaces. Key Engineering Materials (print), 2009, vol. 417- 418, no. 417- 418, p. 301-304. ISSN: 1013- 9826.Detail
HUTAŘ, P.; SEITL, S.; NÁHLÍK, L.; ŠEVČÍK, M.; KNÉSL, Z. Stress distribution along the 3D crack front. Computational Mechanics 2009. Plzeň: Západočeská univerzita, 2009. p. 1-2. ISBN: 978-80-7043-824- 4.Detail
ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Evaluation of stress intensity factor in FGM. Computational Mechanics 2009. Plzeň: Západočeská univerzita, 2009. p. 1-2. ISBN: 978-80-7043-824- 4.Detail
HUTAŘ, P.; ŠEVČÍK, M.; KNÉSL, Z.; NEZBEDOVÁ, E.; LACH, R. Effect of the weld- joint on fracture behaviour of polymer material. Dortmund: 2009. p. 173-173. Detail
HUTAŘ, P.; ŠEVČÍK, M.; KNÉSL, Z.; NEZBEDOVÁ, E. Numerical modeling of the polymer weld. In Tagungsband 12 Problemseminar. Merseburg: Polymer service GmbH, 2009. p. 210-214. ISBN: 978-3-86829-170- 4.Detail
2008
ŠESTÁKOVÁ, L.; HUTAŘ, P.; FIEDLER, L.; NÁHLÍK, L. K-kalibrace nehomogenních zkušebních těles typu C. In 10th International Scientific Conference - Applied Mechanics 2008 (full texts of paper and extended abstracts). Gliwice, Poland: Wydawnictwo Katedry Mechaniki Stosowanej, 2008. p. 24-31. ISBN: 978-83-60102-49-7.Detail
NEZBEDOVÁ, E.; KNÉSL, Z.; HUTAŘ, P.; MAJER, Z.; VESELÝ, P. TOUGHNESS OF PP-BASED PARTICLE COMPOSITE: ROLE OF MICRO- CRACK PARTICLE INTERACTIONS. Properties, Processing, Modification, Application of Polymeric Materials. Halle/ Saale: 2008. p. A36 (A36 p.)ISBN: 978-3-940744-17- 3.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of apparent fracture toughness of ceramic laminates based on generalized strain energy density factor. In 17th European Conference on Fracture. Brno: VUTIUM Brno, 2008. p. 1522-1529. ISBN: 9781617823190.Detail
NEZBEDOVÁ, E.; KNÉSL, Z.; HUTAŘ, P.; MAJER, Z.; VESELÝ, P. Effect of Particles Size and Density on Fracture Toughness of Polypropylene Particulate Composite. In European Conference on Fracture, ECF17. Brno: 2008. p. 1576-1583. ISBN: 9781617823190.Detail
NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Transverse cracking of layered structures: evaluation of fatigue crack propagation. Materials Science Forum, 2008, vol. 567- 568, no. xxx, p. 221-224. ISSN: 0255- 5476.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of the crack propagation direction of a crack touching the interface between two elastic materials. Materials Science Forum, 2008, vol. 567- 568, no. 567- 568, p. 225-228. ISSN: 0255- 5476.Detail
HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The effect of the singularity induced by the free surface on fatigue crack growth in thin structures. Key Engineering Materials, 2008, vol. 385- 387, no. 385- 387, p. 317-320. ISSN: 1013- 9826.Detail
HUTAŘ, P.; NÁHLÍK, L. Fatigue crack shape prediction based on vertex singularity. Applied andComputational Mechanics, 2008, vol. 2, no. 1, p. 45-53. ISSN: 1802- 680X.Detail
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The influence of loading direction on micro- crack behaviour in polymer composite. Applied andComputational Mechanics, 2008, vol. 2, no. 2, p. 285-290. ISSN: 1802- 680X.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Numerical investigation of stress singularities in cracked bimaterial body. Key Engineering Materials, 2008, vol. 385- 387, no. 385- 387, p. 125-128. ISSN: 1013- 9826.Detail
HUTAŘ, P.; MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; KNÉSL, Z. The influence of particle size on the fracture toughness of a PP- based particle composite. Riga, Latvia: Institute of Polymer Mechanics, University of Latvia, 2008. p. 112-112. Detail
HUTAŘ, P.; MAJER, Z.; KNÉSL, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; PROD'HOMME, G. Computational estimation of micro- crack behaviour in polypropylene copolymer. Barcelona, Spain (Venice, Italy): 2008. p. 1-2. Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Crack propagation in the vicinity of interface between two elastic materials. 5th International Conference on Fracture of Polymers, Composites and Adhesives. Les Diablerets, Switzerland: 2008. p. P031 ( p.)Detail
MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Numerical analysis of a crack approaching the interface of two dissimilar materials. Properties, Procesing, Modification, Application of Polymeric Materials. Halle/Saale, Germany: 2008. p. PI- 68 ( p.)ISBN: 978-3-940744-17- 3.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Estimation of the critical stress for failure of layered composite materials. IWCMM18. Beijing, China: Beijing Institute of Technology, 2008. p. 103-103. Detail
KNÉSL, Z.; HUTAŘ, P.; MAJER, Z.; NÁHLÍK, L. PARTICLE SHAPE EFFECT ON FRACTURE TOUGHNESS OF PP-BASED PARTICULATE COMPOSITE: ROLE OF THE INTERPHASE. Les Diablerets: Elsevier, 2008. p. 1 (1 s.). Detail
HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z.; SEITL, S. The influence of vertex singularities on fatigue crack shape. In ECF17 - European Conference on Fracture 17. Brno: VUTIUM, 2008. p. 1060-1066. ISBN: 9781617823190.Detail
2007
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Vliv rozhraní vrstevnatého kompozitu na směr šíření trhliny. In 9th International Scientific Conference Applied Mechanics 2007, Book of Extended Abstracts. Ostrava: VŠB - Technická univerzita Ostrava, 2007. p. 205-206. ISBN: 978-80-248-1389- 9.Detail
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Influence of Bi- material Interface on Crack Propagation Direction in Multilayer Composite. In Engineering mechanics 2007. Svratka, CR: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i., Prague, 2007. p. 269-270. ISBN: 978-80-87012-06- 2.Detail
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Delaminace ochranné vrstvy způsobená povrchovou trhlinou. In SEMDOK 2007. Žilina - Súlov: EDIS, 2007. p. 105-108. ISBN: 978-80-8070-639- 5.Detail
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L. Chování trhlin v tenkých ochranných vrstvách. In SEMDOK 2007. Žilina- Súlov: EDIS, 2007. p. 84-87. ISBN: 978-80-8070-639- 5.Detail
NÁHLÍK, L.; HUTAŘ, P. INFLUENCE OF BI- MATERIAL INTERFACE AND PLASTICITY INDUCED CRACK CLOSURE ON THRESHOLD VALUES. In Engineering mechanics 2007. Praha: ÚT AV ČR, 2007. p. 1-8. ISBN: 978-80-87012-06- 2.Detail
KNÉSL, Z.; HUTAŘ, P.; NÁHLÍK, L.; NEZBEDOVÁ, E.; VLACH, B. ROLE OF PARTICLE SIZE AND FILLER MATRIX ADHESION ON STRESS STATE IN TERMOPLASTIC COMPOSITES. In Computational modeling and experiments of the composite materials with micro- and nano structure. Lipt. Mikuláš: 2007. p. 1-8. ISBN: 978-80-8040-321- 8.Detail
NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of the crack propagation direction of a crack touching the interface between two elastic materials. Abstract Booklet MSMF- 5. Brno: VUTIUM Brno, 2007. p. 74-74. ISBN: 978-80-214-3434- 9.Detail
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. ESTIMATION OF CRITICAL VALUES FOR CRACK PROPAGATION FROM SHARP V- NOTCH. In Engineering Mechanics 2007, Book of Extended Abstracts. 1. Praha: Institute of Thermomechanics, Acade,y of Science of the Czech Republic, v. , v. , v., 2007. p. 167-168. ISBN: 978-80-87012-06- 2.Detail
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, J. INFLUENCE OF THE SINGULARITY INDUCED BY THE FREE SURFACE ON BEHAVIOUR OF THIN BODY WITH A V- NOTCH. In Applied Mechanics 2007 - Book of Extended Abstract. Ostrava: VŠB - Technical University of Ostrava, 2007. p. 155-156. ISBN: 978-80-248-1389- 9.Detail
ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Fracture mechanics parameters of multilayer pipes. Applied andComputational Mechanics, 2007, vol. 1, no. 1, p. 299-306. ISSN: 1802-680X.Detail | WWW | Full text in the Digital Library
MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Influence of particles- matrix interphase on stress distribution in particulate composite with polymer matrix. Applied andComputational Mechanics, 2007, vol. 1, no. 1, p. 143-148. ISSN: 1802- 680X.Detail
NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. The Influence of Loading Ratio on Fatigue Crack Propagation Through a Bi- material Interface. Key Engineering Materials (print), 2007, vol. 348- 349, no. 348- 349, p. 317-320. ISSN: 1013- 9826.Detail
HUTAŘ, P.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; KNÉSL, Z. Quantification of the influence of vertex singularities on crack behaviour. IWCMM17- Paris Book of Abstracts. Paris, France: Centre des Matériaux, 2007. p. 139-139. ISBN: -.Detail
KNÉSL, Z.; HUTAŘ, P.; NÁHLÍK, L. EFFECT OF THE INTERFACE ON FRACTURE TOUGHNESS OF PARTICLE REINFORCED COMPOSITES. In ICCE-15 Fifteenth annual international conference on composites/ nano engineering. New Orleans: University of New Orleans, 2007. p. 1-2. Detail
*) Publications are generated once a 24 hours.