Brno University of Technology - Vnitřní projekty VUT

- whole funder (2020-01-01 - 2021-12-31)

FSI-S-20-6267

Czech

Böhm Michael, Ing., Ph.D. - fellow researcher
Dlugoš Jozef, Ing., Ph.D. - fellow researcher
Doman Jozef, Ing. - fellow researcher
Drbal Milan, Ing., Ph.D. - fellow researcher
Fojtášek Jan, Ing., Ph.D. - fellow researcher
Fridrichová Kateřina, Ing. - fellow researcher
Hloušek David, Ing., Ph.D. - fellow researcher
Kašpárek Jaroslav, Ing., Ph.D. - fellow researcher
Kučera Pavel, doc. Ing., Ph.D. - fellow researcher
Láštic Daniel, Ing., Ph.D. - fellow researcher
Malášek Jiří, doc. Ing., Ph.D. - fellow researcher
Novotný Pavel, prof. Ing., Ph.D. - fellow researcher
Otipka Václav, Ing., Ph.D. - fellow researcher
Píštěk Václav, prof. Ing., DrSc. - fellow researcher
Porteš Petr, doc. Ing., Ph.D. - fellow researcher
Prokop Aleš, Ing., Ph.D. - fellow researcher
Ptáček Martin, Ing. - fellow researcher
Rekem Jakub, Ing. - fellow researcher
Řehák Kamil, Ing., Ph.D. - fellow researcher
Sedláček Martin, Ing. - fellow researcher
Svída David, Ing., Ph.D. - fellow researcher
Šebela Kamil, Ing. - fellow researcher
Škopán Miroslav, doc. Ing., CSc. - fellow researcher
Tobiáš Martin, Ing., Ph.D. - fellow researcher
Ušiak Michal, Ing. - fellow researcher
Vacula Jiří, Ing., Ph.D. - fellow researcher
Vančura Jan, Ing., Ph.D. - fellow researcher
Vondra Róbert, Ing. - fellow researcher
Vopařil Jan, Ing. - fellow researcher
Zajac Roman, Ing. - fellow researcher
Zeizinger Lukáš, Ing., Ph.D. - fellow researcher
Zháňal Lubor, Ing., Ph.D. - fellow researcher
Štětina Josef, prof. Ing., Ph.D. - principal person responsible

Institute of Automotive Engineering
- internal (2020-01-01 - 2022-12-31)
Faculty of Mechanical Engineering
- beneficiary (2020-01-01 - 2022-12-31)

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. RESEARCH OF STABILITY OF CONTAINERS IN THE COMBINED TRAINS DURING TRANSPORTATION BY RAILROAD FERRY. MM Science Journal, 2020, no. 1, p. 3728-3733. ISSN: 1805-0476.
Detail

LOVSKA, A.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P. The research of the influence of viscous interaction between wagon and container on the dynamic load during transportation by rail ferry. In Vibroengineering Procedia. Vibroengineering Procedia. JVE International, 2020. p. 62-67. ISSN: 2345-0533.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Computational modelling of dynamic loads of a container under viscous interaction with a flat wagon in sea transport. In Vibroengineering Procedia. Vibroengineering Procedia. JVE International, 2020. p. 68-73. ISSN: 2345-0533.
Detail

PÍŠTĚK, V.; KUČERA, P.; FOMIN, O; LOVSKA, A. Effective Mistuning Identification Method of Integrated Bladed Discs of Marine Engine Turbochargers. Journal of Marine Science and Engineering, 2020, vol. 8, no. 5, p. 1-12. ISSN: 2077-1312.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Strength characteristic determination of a flat wagon carrying structure with a lower centre of gravity. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2020. p. 99-104. ISSN: 2345-0533.
Detail

DRBAL, M. A method of rotary engine performance prediction. Scientific Journal of Silesian University of Technology. Series Transport, 2020, vol. 108, no. 1, p. 37-43. ISSN: 0209-3324.
Detail

ZEIZINGER, L.; JONÁK, M. Weight and price optimization of truss construction with using genetic algorithm. Manufacturing TECHNOLOGY, 2020, vol. 20, no. 2, p. 270-275. ISSN: 1213-2489.
Detail

LOVSKA, A.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P. Dynamic Load Modelling within Combined Transport Trains during Transportation on a Railway Ferry. Applied Sciences - Basel, 2020, vol. 10, no. 16, p. 1-15. ISSN: 2076-3417.
Detail

KAŠPÁREK, J.; ŠKOPÁN, M.; ZEIZINGER, L.; POKORNÝ, P. Konstrukce středových kloubů u strojů s kloubovým rámem. 46. Medzinárodná vedecká konferencia katedier dopravných, manipulačných, stavebných a poľnohospodárskych strojov - Zborník konferencie. first. Žilina: VTS pri Žilinskej univerzite v Žilině, 2020. s. 46-51. ISBN: 9788089276608.
Detail

PÍŠTĚK, V.; KUČERA, P.; FOMIN, O.; LOVSKA, A.; PROKOP, A. Acoustic Identification of Turbocharger Impeller Mistuning—A New Tool for Low Emission Engine Development. Applied Sciences - Basel, 2020, vol. 10, no. 18, p. 1-15. ISSN: 2076-3417.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Dynamic load of the carrying structure of an articulated wagon with new draft gear concepts. In Vibroengineering Procedia. Vibroengineering Procedia. JVE International, 2020. p. 84-89. ISSN: 2345-0533.
Detail

LOVSKA, A.; FOMIN, O.; KUČERA, P.; PÍŠTĚK, V. Calculation of Loads on Carrying Structures of Articulated Circular-Tube Wagons Equipped with New Draft Gear Concepts. Applied Sciences - Basel, 2020, vol. 10, no. 21, p. 1-11. ISSN: 2076-3417.
Detail

LOVSKA, A.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P. Dynamic Load and Strength Determination of Carrying Structure of Wagons Transported by Ferries. Journal of Marine Science and Engineering, 2020, vol. 8, no. 11, p. 1-14. ISSN: 2077-1312.
Detail

CZAKÓ, A.; ŘEHÁK, K.; PROKOP, A.; RANJAN, V. Determination of static transmission error of helical gears using finite element analysis. Journal of Measurements in Engineering, 2020, vol. 8, no. 4, p. 167-181. ISSN: 2335-2124.
Detail

NOVOTNÝ, P.; HRABOVSKÝ, J.; KLÍMA, J.; HORT, V. Improving the thrust bearing performance of turbocharger rotors using optimization methods and virtual prototypes. In 12th International Conference on Vibrations in Rotating Machinery. 1st Edition. London: CRC Press, 2020. p. 100-111. ISBN: 9781003132639.
Detail

NOVOTNÝ, P.; VACULA, J.; DLUGOŠ, J.; JONÁK, M. Analytical Tool for the Identification of Vibration and Noise Sources in Turbochargers. 51st International Scientific Conference of Czech and Slovak Universities and Institutions Dealing with Motor Vehicles and Internal Combustion Engines Research. 1. Praha: České vysoké učení technické v Praze, 2020. p. 46-51. ISBN: 978-80-01-06744-4.
Detail

VOPAŘIL, J.; PROKOP, A.; ŘEHÁK, K. Influence of a Powertrain Mounting Method on Powertrain Vibration. In Proceedings of the 2020 19th International Conference on Mechatronics – Mechatronika (ME). Prague: Czech Technical University in Prague, Faculty of Electrical Engineering, 2020. p. 200-206. ISBN: 978-1-7281-5601-9.
Detail

NOVOTNÝ, P.; VACULA, J.; JONÁK, M. Evolutionary Optimisation of the Thrust Bearing Considering Multiple Operating Conditions in Turbomachinery. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, vol. 195, no. 2021, p. 1-13. ISSN: 0020-7403.
Detail

NOVOTNÝ, P.; DLUGOŠ, J.; VACULA, J. Application of Multibody Dynamics Tools for Determination of Engine Excited Turbocharger Vibrations. In ENGINEERING MECHANICS 2020. 1st edition. 2020. p. 384-387. ISBN: 978-80-214-5896-3.
Detail

BÖHM, M.; SVÍDA, D.; ŠTĚTINA, J. ANALYSIS OF THE TEMPERATURE PULSATIONS OF THE EXHAUST GAS BEFORE THE THREE-WAY CATALYST. In ENGINEERING MECHANICS. Engineering Mechanics .... 1. BRNO: BRNO UNIV TECHNOL, FAC MECHANICAL ENGINEERING, 2020. p. 78-81. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.
Detail

TOBIÁŠ, M.; PORTEŠ, P.; ZHÁŇAL, L.; FOJTÁŠEK, J. MEASUREMENT AND ANALYSIS OF DYNAMIC RIDING BEHAVIOR OF A MOTORCYCLE. In ENGINEERING MECHANICS. Engineering Mechanics .... 1. Brno University of Technology, 2020. p. 488-491. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.
Detail

ŠEBELA, K.; JANOUŠEK, M. Airflow measurement at Formula Student car. In ENGINEERING MECHANICS 2020. Engineering Mechanics .... 26th INTERNATIONAL CONFERENCE. Brno University of Technology, 2020. p. 452-455. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.
Detail

CZAKÓ, A.; ŘEHÁK, K.; PROKOP, A. DETERMINATION OF TRANSMISSION ERROR AT HELICAL GEAR. In ENGINEERING MECHANICS 2020. 2020. p. 118-121. ISBN: 978-80-214-5896-3.
Detail

FRAŇOVÁ, Z.; ŘEHÁK, K.; PROKOP, A. TRANSMISSION ERROR OF THE SPIRAL BEVEL GEARS. In ENGINEERING MECHANICS 2020. 2020. p. 138-141. ISBN: 978-80-214-5896-3.
Detail

REKEM, J.; PROKOP, A.; ZAJAC, R.; ŘEHÁK, K. VIRTUAL ROPS TESTING ON SUSPENDED AGRICULTURAL TRACTOR. In ENGINEERING MECHANICS 2020. 2020. p. 436-439. ISBN: 978-80-214-5896-3.
Detail

VONDRA, R.; ŘEHÁK, K.; PROKOP, A. STRAIN-STRESS ANALYSIS OF GEAR COUPLING. In ENGINEERING MECHANICS 2020. 2020. p. 520-523. ISBN: 978-80-214-5896-3.
Detail

DLUGOŠ, J.; NOVOTNÝ, P. Effective Implementation of Elastohydrodynamic Lubrication of Rough Surfaces into Multibody Dynamics Software. Applied Sciences - Basel, 2021, vol. 11, no. 4, p. 1-21. ISSN: 2076-3417.
Detail

KAŠPÁREK, J.; POKORNÝ, P.; ZEIZINGER, L.; ŠKOPÁN, M. Problems of the central joint in an articulated frame. Transport Means, 2020, vol. Part I, no. 1, p. 481-484. ISSN: 1822-296X.
Detail

VARBANETS, R.; FOMIN, O.; PÍŠTĚK, V.; KLYMENKO, V.; MINCHEV, D.; KHRULEV, A.; ZALOZH, V.; KUČERA, P. Acoustic Method for Estimation of Marine Low-Speed Engine Turbocharger Parameters. Journal of Marine Science and Engineering, 2021, vol. 9, no. 3, p. 1-13. ISSN: 2077-1312.
Detail

SULYM, A.; KHOZIA, P.; TRETIAK, E.; PÍŠTĚK, V.; FOMIN, O.; KUČERA, P. Aspects of Strength Testing of Tank Containers in Compliance with the Requirements of the UN Navigation Rules and Regulations. Journal of Marine Science and Engineering, 2021, vol. 9, no. 3, p. 1-18. ISSN: 2077-1312.
Detail

DRBAL, M.; PÍŠTĚK, V.; KUČERA, P. ROTARY ENGINE FOR SMALL VESSELS. III International Maritime Scientific Conference of the Ship Power Plants and Technical Operation Department of Odessa National Maritime University MPP&O-2021. 2021. p. 222-225.
Detail

FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Determination of the Vertical Load on the Carrying Structure of a Flat Wagon with the 18–100 and Y25 Bogies. Applied Sciences - Basel, 2021, vol. 11, no. 9, p. 1-14. ISSN: 2076-3417.
Detail

ŠTĚTINA, J.; BŘEZINA, M.; BÖHM, M. Small Cogeneration Unit with Heat and Electricity Storage. ENERGIES, 2021, vol. 14, no. 8, p. 1-13. ISSN: 1996-1073.
Detail

BAZALA, J.; HÉBERT, G.; FISCHER, O.; NOTHBAUM, J.; THEWES, M.; VOSSHALL, T.; DIEHL, P.; KUČERA, P. Research and Development of Self-Contained Water Injection Systems. International Journal of Environmental Research and Public Health, 2021, vol. 18, no. 10, p. 1-11. ISSN: 1660-4601.
Detail

FOMIN, O.; LOVSKA, A.; KUČERA, P.; PÍŠTĚK, V. Substantiation of Improvements for the Bearing Structure of an Open Car to Provide a Higher Security during Rail/Sea Transportation. Journal of Marine Science and Engineering, 2021, vol. 9, no. 8, p. 1-17. ISSN: 2077-1312.
Detail

FRIDRICHOVÁ, K.; DRÁPAL, L.; VOPAŘIL, J.; DLUGOŠ, J. Overview of the potential and limitations of cylinder deactivation. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2021, vol. 146, no. 8, p. 1-15. ISSN: 1364-0321.
Detail

NOVOTNÝ, P.; VACULA, J.; HRABOVSKÝ, J. Solution strategy for increasing the efficiency of turbochargers by reducing energy losses in the lubrication system. Energy, 2021, vol. 236, no. 121402, p. 1-16. ISSN: 0360-5442.
Detail

KONDRATIEV, A.; PÍŠTĚK, V.; PURHINA, S.; SHEVTSOVA, M.; FOMINA, A.; KUČERA, P. Self-Heating Mould for Composite Manufacturing. Polymers, 2021, vol. 13, no. 18, p. 1-18. ISSN: 2073-4360.
Detail

BÖHM, M.; ŠTĚTINA, J.; SVÍDA, D. An analysis of the force acting on the apex seal of a rotary engine. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, 2021. p. 27-34. ISBN: 978-80-213-3132-7.
Detail

DRÁPAL, L.; VOPAŘIL, J.; FRIDRICHOVÁ, K.; DLUGOŠ, J. Redesign and dynamics of the valve train of an aircraft engine. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. p. 65-70. ISBN: 978-80-213-3132-7.
Detail

FRIDRICHOVÁ, K.; DRÁPAL, L.; VOPAŘIL, J.; DLUGOŠ, J. Cylinder deactivation of internal-combustion engines: historical development, state-of-the-art and outlook. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. p. 71-82. ISBN: 978-80-213-3132-7.
Detail

ŠEBELA, K.; JANOUŠEK, M.; ŠTĚTINA, J. Laminar Flow Heat Transfer Model for 1D and 3D Modeling. Sborník přednášek. Praha: ČESKÁ ZEMĚDĚLSKÁ UNIVERZITA V PRAZE, TECHNICKÁ FAKULTA, KATEDRA VOZIDEL A POZEMNÍ DOPRAVY, 2021. p. 184-191. ISBN: 978-80-213-3132-7.
Detail

KONDRATIEV, A.; PÍŠTĚK, V.; SMOVZIUK, L.; SHEVTSOVA, M.; FOMINA, A.; KUČERA, P. Stress–Strain Behaviour of Reparable Composite Panel with Step-Variable Thickness. Polymers, 2021, vol. 13, no. 21, p. 1-23. ISSN: 2073-4360.
Detail

NOVOTNÝ, P.; VACULA, J.; KUDLÁČEK, P. Virtual Turbocharger as a Tool for Reality Simulation. In Mechanisms and Machine Science, Proceedings of I4SDG Workshop 2021. 1. Cham: Springer, 2021. p. 535-544. ISBN: 978-3-030-87382-0.
Detail

VACULA, J.; NOVOTNÝ, P. An Overview of Flow Instabilities Occurring in Centrifugal Compressors Operating at Low Flow Rates. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2021, vol. 143, no. 11, p. 1-13. ISSN: 0742-4795.
Detail

OTIPKA, V.; PROKOP, A.; ŘEHÁK, K.; ZAJAC, R. Modal properties diagnostics of the high-pressure fuel injection pipes in off-road diesel engine. Journal of Measurements in Engineering, 2021, vol. 9, no. 1, p. 48-57. ISSN: 2335-2124.
Detail

KAŠPÁREK, J.; ZEIZINGER, L.; ŠKOPÁN, M. Pásový stroj pro aplikaci autonomního řízení nenáročných operací. 47. medzinárodná vedecká konferencia katedier dopravných, manipulačných, stavebných a poľnohospodárskych strojov - Zborník príspevkov z konferencie. Tatranská Lomnica: Technická univerzita v Košiciach, 2021. s. 60-65. ISBN: 9788055339320.
Detail

KONDRATIEV, A.; PÍŠTĚK, V.; SMOVZIUK, L.; SHEVTSOVA, M.; FOMINA, A.; KUČERA, P.; PROKOP, A. Effects of the Temperature–Time Regime of Curing of Composite Patch on Repair Process Efficiency. Polymers, 2021, vol. 13, no. 24, p. 1-20. ISSN: 2073-4360.
Detail

BAUER, F.; PORTEŠ, P.; POLCAR, A.; ČUPERA, J.; FAJMAN, M. Differences in the wheel loads and contact pressure of the in-furrow and on-land rear tractor tyres with mounted and semi-mounted ploughs. SOIL & TILLAGE RESEARCH, 2022, vol. 215, no. January 20222, p. 1-13. ISSN: 0167-1987.
Detail

KUDLÁČEK, P.; NOVOTNÝ, P.; VACULA, J. Modelling Frictional Losses of Turbochargers due to Rotor-Fluid Interaction. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. p. 100-111. ISBN: 978-80-213-3132-7.
Detail

VACULA, J.; NOVOTNÝ, P.; KUDLÁČEK, P. Classification of Aerodynamic Instabilities in a Centrifugal Compressor. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. p. 90-98. ISBN: 978-80-213-3132-7.
Detail

NOVOTNÝ, P.; VACULA, J.; KUDLÁČEK, P. Innovative Approach to Reduce Friction Losses in Turbocharger Thrust Bearings. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. p. 140-146. ISBN: 978-80-213-3132-7.
Detail

MINCHEV, D.; GOGORENKO, O.; VARBANETS, R.; MOSHENTSEV, Y.; PÍŠTĚK, V.; KUČERA, P.; SHUMYLO, O.; KYRNATS, V. Prediction of centrifugal compressor instabilities for internal combustion engines operating cycle simulation. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2022, vol. 0, no. 0, p. 1-13. ISSN: 0954-4070.
Detail

MERGL, V.; KAŠPÁREK, J. Verifying the Lifting and Slewing Dynamics of a Harvester Crane with Possible Levelling When Operating on Sloping Grounds. Forests, 2022, vol. 13, no. 2, p. 1-20. ISSN: 1999-4907.
Detail

KOCHANOV, V.; PÍŠTĚK, V.; KONDRATIEV, A.; YURESKO, T.; KUČERA, P. Influence of Geometric Parameters of Conical Acrylic Portholes on Their Stress–Strain Behaviour. Polymers, 2022, vol. 14, no. 5, p. 1-15. ISSN: 2073-4360.
Detail

FOMIN, O.; VATULIA, G.; GORBUNOV, M.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Determination of residual resource of flat wagons load-bearing structures with a 25-year service life. In IOP Conference Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering. 2021. p. 1-9. ISSN: 1757-8981.
Detail

BÖHM, M.; ŠTĚTINA, J.; SVÍDA, D. Exhaust Gas Temperature Pulsations of a Gasoline Engine and Its Stabilization Using Thermal Energy Storage System to Reduce Emissions. ENERGIES, 2022, vol. 15, no. 7, p. 1-16. ISSN: 1996-1073.
Detail

KONDRATIEV, A.; PÍŠTĚK, V.; VAMBOL, O.; KUČERA, P. Effect of Heating Conditions during Moulding on Residual Stress–Strain Behaviour of a Composite Panel. Polymers, 2022, vol. 14, no. 9, p. 1-14. ISSN: 2073-4360.
Detail

MERGL, V.; KAŠPÁREK, J. Numerical Determination of the Accuracy of Gravity Center Coordinates and Stability of a Model Concept of Harvester with the Rigid Frame. Forests, 2022, vol. 13, no. 4, p. 1-18. ISSN: 1999-4907.
Detail

KONDRATIEV, A.; PÍŠTĚK, V.; VAMBOL, O.; OTROSH, Y.; KUČERA, P.; KUČERA, O. Determination of the Composite Panel Moulding Pressure Value. Polymers, 2022, vol. 14, no. 12, p. 1-17. ISSN: 2073-4360.
Detail

VACULA, J.; NOVOTNÝ, P. Critical pressure in liquids due to dynamic choking. PHYSICAL REVIEW E, 2022, vol. 105, no. 4, p. 1-10. ISSN: 2470-0045.
Detail

RYMAR, T.; TATARCHENKO, H.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P.; BERAN, M.; BURLUTSKYY, O. The Study of Manufacturing Thermal Insulation Materials Based on Inorganic Polymers under Microwave Exposure. Polymers, 2022, vol. 14, no. 15, p. 1-12. ISSN: 2073-4360.
Detail

SINGH, B.; HOTA, R.; DWIDEDI, S.; JHA, R.; RANJAN, V.; ŘEHÁK, K. Analytical Investigation of Sound Radiation from Functionally Graded Thin Plates Based on Elemental Radiator Approach and Physical Neutral Surface. Applied Sciences - Basel, 2022, vol. 12, no. 15, p. 1-19. ISSN: 2076-3417.
Detail

BÖHM, M.; UŠIAK, M.; ŠTĚTINA, J.; SVÍDA, D. The Exhaust Gas Temperature Instability Behind The Electrically Assisted Turbocharger. Scientific Proceeding KOKA 2022. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. p. 119-126. ISBN: 978-80-227-5215-2.
Detail

DRÁPAL, L.; FRIDRICHOVÁ, K.; VOPAŘIL, J.; DLUGOŠ, J. Computational modelling of the torsional damper of an unconventional crank train for a four-cylinder engine. Scientific Proceeding KOKA 2022. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. p. 179-186. ISBN: 978-80-227-5215-2.
Detail

FRIDRICHOVÁ, K.; DRÁPAL, L.; VOPAŘIL, J.; DLUGOŠ, J. Comparison of the dynamics of selective and rolling cylinder deactivation on spark-ignition four-cylinder engine. Scientific Proceedings KOKA 2022. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. p. 57-64. ISBN: 978-80-227-5215-2.
Detail

SAGIN, S.; KUROPYATNYK, O.; SAGIN, A.; TKACHENKO, I.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P. Ensuring the Environmental Friendliness of Drillships during Their Operation in Special Ecological Regions of Northern Europe. Journal of Marine Science and Engineering, 2022, vol. 10, no. 9, p. 1-25. ISSN: 2077-1312.
Detail

SAGIN, S.; MADEY, V.; SAGIN, A.; STOLIARYK, T.; FOMIN, O.; KUČERA, P. Ensuring Reliable and Safe Operation of Trunk Diesel Engines of Marine Transport Vessels. Journal of Marine Science and Engineering, 2022, vol. 10, no. 10, p. 1-20. ISSN: 2077-1312.
Detail

UŠIAK, M.; BÖHM, M.; ŠEBELA, K. Capability Study of a Built-In ECMS Algorithm for Hybrid Electric Vehicles in GT-Suite Software. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. p. 89-96.
Detail

ŠEBELA, K.; JANOUŠEK, M.; UŠIAK, M.; ŠTĚTINA, J. Multi temperature difference model of heat exchanger in GT-Suite. Scientific Proceedings KOKA 2022. 62. Bratislava: SPEKTRUM STU Publishing, 2022. p. 163-168. ISBN: 978-80-227-5215-2.
Detail

KUDLÁČEK, P.; NOVOTNÝ, P.; VACULA, J. Experimental Verification of the Effect of Rotor Design Changes on the Mechanical Losses. Scientific Proceedings KOKA 2022. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. p. 97-104. ISBN: 978-80-227-5215-2.
Detail

UŠIAK, M.; BÖHM, M.; ŠEBELA, K. Performance Study of a Developed Rule-Based Control Strategy with Use of an ECMS Optimization Control Algorithm on a Plug-In Hybrid Electric Vehicle. Journal of Mechanical Engineering - Strojnícky časopis, 2022, vol. 72, no. 3, p. 61-70. ISSN: 2450-5471.
Detail

AL-QURAAN, T.; ALFAQS, F.; ALREFO, I.; VOJTOV, V.; VOITOV, A.; KRAVTSOV, A.; MIROSHNYK, O.; KONDRATIEV, A.; KUČERA, P.; PÍŠTĚK, V. Methodological Approach in the Simulation of the Robustness Boundaries of Tribosystems under the Conditions of Boundary Lubrication. Lubricants, 2023, vol. 11, no. 1, p. 1-17. ISSN: 2075-4442.
Detail

AL-RAWASHDEH, A.; YOUNES, T.; DALABEEH, A.; AL_ISSA, H.; QAWAQZEH, M.; MIROSHNYK, O.; KONDRATIEV, A.; KUČERA, P.; PÍŠTĚK, V.; STEPENKO, S. Experimental Investigation of Microcontroller-Based Acoustic Temperature Transducer Systems. SENSORS, 2023, vol. 23, no. 2, p. 1-15. ISSN: 1424-8220.
Detail

KAŠPÁREK, J.; ZEIZINGER, L.; MERGL, V.; ŠKOPÁN, M. Pásové vozidlo pro dopravu paletizovaného materiálu. 48. mezinárodní konference kateder dopravních, manipulačních, stavebních a zemědělských strojů. Studentská 1402/2, Liberec: Technická univerzita v Liberci, 2022. s. 95-102. ISBN: 978-80-7494-606-6.
Detail

URBÁNEK, M.; KAŠPÁREK, J.; ZEIZINGER, L.; ŠKOPÁN, M. Využití chytrých parkovacích systémů ke zvýšení bezpečnosti nákladní dopravy. 48. mezinárodní konference kateder dopravních, manipulačních, stavebních a zemědělských strojů. Studentská 1402/2, Liberec: Technická univerzita v Liberci, 2022. s. 160-166. ISBN: 978-80-7494-606-6.
Detail

VACULA, J.; NOVOTNÝ, P.; KUDLÁČEK, P. Application of a Casing Treatment to a Centrifugal Compressor. Scientific Proceedings KOKA 2022. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. ISBN: 978-80-227-5215-2.
Detail

ZEIZINGER, L.; POKORNÝ, P. Výpočtová náhrada lícovaného šroubového spoje. 48. mezinárodní konference kateder dopravních, manipulačních, stavebních a zemědělských strojů. Studentská 1402/2, Liberec: Technická univerzita v Liberci, 2022. s. 167-173. ISBN: 978-80-7494-606-6.
Detail

KUČERA, P.; KONDRATIEV, A.; PÍŠTĚK, V.; TARANENKO, I.; NABOKINA, T.; KAPLAN, Z. Thin-walled open-profile composite beams under thermo-mechanical loading. COMPOSITE STRUCTURES, 2023, vol. 312, no. 116844, p. 1-14. ISSN: 1879-1085.
Detail

STANĚK, L.; NERUDA, J.; MERGL, V. Difference in the magnitude of power saw vibrations affecting the operator during forest felling. Central European Forestry Journal, 2023, vol. 69, no. 1, p. 59-67. ISSN: 2454-034X.
Detail

NOVOTNÝ, P.; KUDLÁČEK, P.; VACULA, J. Explanation of the mechanisms of unsteady gas flow through the turbocharger seal system, including thermal and structural interactions. Propulsion and Power Research, 2023, vol. 12, no. 2, p. 180-198. ISSN: 2212-540X.
Detail

ZEIZINGER, L.; POKORNÝ, P. Detailní simulace nýtového spoje. 50. mezinárodní konference kateder dopravních, manipulačních, stavebních a zemědělských strojů. Brno: VUT Brno, 2024. s. 138-143. ISBN: 978-80-214-6252-6.
Detail

RACKOVSKÝ, D.; CZAKÓ, A. Influence of Sine-Shaped Profile Deviations on Static Transmission Error. In ENGINEERING MECHANICS 2024. Inženýrská mechanika - Engineering Mechanics. 2024. p. 246-249. ISBN: 978-80-214-6235-9. ISSN: 1210-2717.
Detail

VANČURA, J.; MACKŮ, V.: Pouzdro laserového zaměřovače; Pouzdro laserového zaměřovače pro pistoli Walther PPS M2. C1/101. (funkční vzorek)
Detail

KAŠPÁREK, J.; ŠKOPÁN, M.; ZEIZINGER, L.; POKORNÝ, P.: 47. Medzinárodná vedecká konferencia katedier dopravných, manipulačných, stavebných a poľnohospodárskych strojov. GRANDHOTEL PRAHA – Tatranská Lomnica (02.09.2021)
Detail

ŠKOPÁN, M.; KAŠPÁREK, J.; ZEIZINGER, L.; URBÁNEK, M.: 48. Mezinárodní vědecká konference kateder dopravních, manipulačních, stavebních a zemědělských strojů. chata Pyramida – osada Jizerka (14.09.2022)
Detail

DRÁPAL, L.; ŠTĚTINA, J.; NOVOTNÝ, P.; FRIDRICHOVÁ, K.; BÖHM, M.; ŠEBELA, K.; VACULA, J.; KUDLÁČEK, P.; UŠIAK, M.: KOKA 2022. Kočovce (07.09.2022)
Detail

DRÁPAL, L.; ŠTĚTINA, J.; NOVOTNÝ, P.; FRIDRICHOVÁ, K.; BÖHM, M.; ŠEBELA, K.; VACULA, J.; KUDLÁČEK, P.: KOKA 2021. Praha (22.09.2021)
Detail