doc. Ing.

Ladislav Čelko

Ph.D.

CEITEC, RG-2-05 – Head

+420 54114 9701
ladislav.celko@ceitec.vutbr.cz

Send BUT message

doc. Ing. Ladislav Čelko, Ph.D.

Publications

  • 2024

    DROTÁROVÁ, L.; SLÁMEČKA, K.; BALINT, M.; REMEŠOVÁ, M.; HUDÁK, R.; ŽIVČÁK, J.; ČELKO, L.; MONTUFAR JIMENEZ, E. Biodegradable WE43 Mg alloy/hydroxyapatite interpenetrating phase composites with reduced hydrogen evolution. Bioactive Materials, 2024, vol. 42, no. 12, p. 519-530. ISSN: 2452-199X.
    WWW

    TKACHENKO, S.; OLIVER URRUTIA, C.; KSENZOVA, O.; SLÁMEČKA, K.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; BALÁŽ, M.; DEÁK, A.; MONTUFAR JIMENEZ, E.; ČELKO, L. Production of spherical Mo and Mo-Si powders by spray drying of Si suspension in a water-soluble Mo precursor. ADVANCED POWDER TECHNOLOGY, 2024, vol. 35, no. 1, ISSN: 0921-8831.
    Detail | WWW

    DUDKOVÁ, E.; BALÁŽ, M.; KOVÁČ, J.; DANEU, N.; KASHIMBETOVA, A.; BRIANČIN, J.; KOVÁČ. J.; KOVÁČOVÁ, S.; ČELKO, L. Optical and Optoelectrical Properties of Ternary Chalcogenide CuInS2/TiO2 Nanocomposite Prepared by Mechanochemical Synthesis. Crystals, 2024, vol. 14, no. 4, ISSN: 2073-4352.
    Detail | WWW

    KOVÁČOVÁ, M.; YANKOVYCH, H.; AUGUSTYNIAK, A.; CASAS LUNA, M.; REMEŠOVÁ, M.; FINDORÁKOVÁ, L.; STAHORSKÝ, M.; ČELKO, L.; BALÁŽ, M. Triggering antibacterial activity of a common plant by biosorption of selected heavy metals. JOURNAL OF BIOLOGICAL INORGANIC CHEMISTRY, 2024, vol. 29, no. 4, p. 201-216. ISSN: 0949-8257.
    Detail | WWW | Full text in the Digital Library

    CIHLÁŘ, J.; TKACHENKO, S.; BEDNAŘÍKOVÁ, V.; CIHLÁŘ, J.; ČÁSTKOVÁ, K.; TRUNEC, M.; ČELKO, L. Study of the Synthesis of Multi-Cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Co-Ni-O Aerogels and Their Catalytic Activity in the Dry Reforming of Methane. Gels, 2024, vol. 10, no. 5, ISSN: 2310-2861.
    Detail | WWW

  • 2023

    CIHLÁŘ, J.; TINOCO NAVARRO, L.; CIHLÁŘ, J.; KAŠPÁREK, V.; MICHALIČKA, J.; ČÁSTKOVÁ, K.; LÁZÁR, I.; KAŠTYL, J.; ČELKO, L.; VESELÝ, M.; DZIK, P. Influence of substituted acetic acids on “bridge” synthesis of highly photocatalytic active heterophase TiO2 in hydrogen production. JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2023, vol. 105, no. 2, p. 471-488. ISSN: 0928-0707.
    Detail | WWW

    SLÁMEČKA, K.; KASHIMBETOVA, A.; POKLUDA, J.; ZIKMUND, T.; KAISER, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by material extrusion additive manufacturing. Materials & Design, 2023, vol. 225, no. 1, p. 1-11. ISSN: 0264-1275.
    Detail | WWW | Full text in the Digital Library

    DUTKOVÁ, E.; KOVÁČ, J.; KOVÁČ, J.; HEJTMÁNEK, J. ; LEVINSKÝ, P.; KASHIMBETOVA, A.; SAYAGUÉS, M. J.; FABIÁN, M.; BUJŇÁKOVÁ, Z.; BALÁŽ, M.; GÁBOROVÁ, K.; PUCHÝ, K.; ČELKO, L. Properties of Mechanochemically Synthesized Famatinite Cu3SbS4 Nanocrystals. MICRO, 2023, vol. 3, no. 2, p. 458-470. ISSN: 1081-0595.
    Detail | WWW

    SOPHA, H.; KASHIMBETOVA, A.; BAUDYS, M.; CHENNAM, P.; SEPÚLVEDA SEPÚLVEDA, L.; RUSEK, J.; KOLÍBALOVÁ, E.; ČELKO, L.; KRÝSA, J.; MACÁK, J. Flow-through Gas Phase Photocatalysis Using TiO2 Nanotubes on Wirelessly Anodized 3D-Printed TiNb Meshes. Nano Letters, 2023, vol. 23, no. 14, p. 6406-6413. ISSN: 1530-6992.
    Detail | WWW | Full text in the Digital Library

    HERNANDEZ ESCALERA, C.; FIGUEROA, I., A.; CASAS LUNA, M.; RODRIGUEZ-GÓMEZ, F. J.; PINA-BARBA, C.; MONTUFAR JIMENEZ, E.; ČELKO, L. Magnesium Strengthening in 3D Printed TCP Scaffold Composites. Journal of Composites Science, 2023, vol. 7, no. 11, ISSN: 2504-477X.
    Detail | WWW

    TKACHENKO, S.; BEDNAŘÍKOVÁ, V.; KSENZOVA, O.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CIHLÁŘ, J.; BALÁŽ, M.; DEÁK, A.; ČELKO, L. Microstructure and reduction behavior of Mo powders doped with La2O3 and ZrO2 oxides using the spray drying method. Journal of Alloys and Compounds, 2023, vol. 964, no. 11.6.2023, ISSN: 0925-8388.
    Detail | WWW

    DEÁK, A.; SZABÓ, P.; BEDNAŘÍKOVÁ, V.; CIHLÁŘ, J.; DEMETER, A.; REMEŠOVÁ, M.; COLACINO, E.; ČELKO, L. The first solid-state route to luminescent Au(I)-glutathionate and its pH-controlled transformation into ultrasmall oligomeric Au10-12(SG)10-12 nanoclusters for application in cancer radiotheraphy. Frontiers in Chemistry, 2023, vol. 11, no. 6, ISSN: 2296-2646.
    Detail | WWW | Full text in the Digital Library

    LÁZÁR, I.; ČELKO, L.; MENELAOU, M. Aerogel-Based Materials in Bone and Cartilage Tissue Engineering-A Review with Future Implications. Gels, 2023, vol. 9, no. 9, ISSN: 2310-2861.
    Detail | WWW | Full text in the Digital Library

    PRADHAN, G.; CELEGATO, F.; MADRI, A.; COISSON, M.; BARRERA, G.; MIKULIČKOVÁ, L.; ARREGI URIBEETXEBARRIA, J.; ČELKO, L.; UHLÍŘ, V.; RIZZI, P.; TIBERTO, P. Control of magnetic vortex states in FeGa microdisks: Experiments and micromagnetics. Journal of Science-Advanced Materials and Devices, 2023, vol. 8, no. 3, p. 1-8. ISSN: 2468-2179.
    Detail | WWW | Full text in the Digital Library

    SLÁMEČKA, K.; KASHIMBETOVA, A.; TKACHENKO, S.; GEJDOŠ, P.; POKLUDA, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Fatigue performance of hierarchically porous titanium scaffolds produced by additive manufacturing and its possible improvement by gas nitriding. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. BRISTOL: IOP PUBLISHING LTD, 2023. ISSN: 1742-6588.
    Detail | WWW

    TKACHENKO, S.; SLÁMEČKA, K.; OLIVER URRUTIA, C.; KSENZOVA, O.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; DVOŘÁK, K.; BALÁŽ, M.; DEÁK, A.; KACHLÍK, M.; ČELKO, L.; MONTUFAR JIMENEZ, E. Effect of powder milling on sintering behavior and monotonic and cyclic mechanical properties of Mo and Mo-Si lattices produced by direct ink writing. Journal of Materials Research and Technology, 2023, vol. 27, no. 10, p. 2475-2489. ISSN: 2238-7854.
    Detail | WWW | Full text in the Digital Library

    OLIVER URRUTIA, C.; DROTÁROVÁ, L.; GASCÓN-PÉREZ, S.; SLÁMEČKA, K.; RAVASZOVÁ, S.; ČELKO, L.; MONTUFAR JIMENEZ, E. Hydroxyapatite-Resin Composites Produced by Vat Photopolymerization and Post-Processing via In Situ Hydrolysis of Alpha Tricalcium Phosphate. Ceramics-Switzerland, 2023, vol. 6, no. 4, p. 2282-2294. ISSN: 2571-6131.
    Detail | WWW | Full text in the Digital Library

  • 2022

    SHALABAYEV, Z.; BALÁŽ, M.; KHAN, N.; NURLAN, Y.; AUGUSTYNIAK, A.; DANAEU, n.; TATYKAYEV, B.; DUTKOVÁ, E.; BURASHEV, G.; CASAS LUNA, M.; DŽUNDA, R.; BUREŠ, R.; ČELKO, L.; ILIN, A.; BURKITBAYEV, M. Sustainable Synthesis of Cadmium Sulfide, with Applicability in Photocatalysis, Hydrogen Production, and as an Antibacterial Agent, Using Two Mechanochemical Protocols. Nanomaterials, 2022, vol. 12, no. 8, p. 1-21. ISSN: 2079-4991.
    Detail | WWW

    KASHIMBETOVA, A.; SLÁMEČKA, K.; DÍAZ DE LA TORRE, S.; HERNÁNDEZ-MORALES, B.; MENDEZ-GARCIA, J.; PINA-BARBA, M.; HUI, D.; ČELKO, L.; MONTUFAR JIMENEZ, E. Pressure-less spark plasma sintering of 3D-plotted titanium porous structures. Journal of Materials Research and Technology, 2022, vol. 22, no. 1, p. 2147-2157. ISSN: 2238-7854.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; ČELKO, L.; REMEŠOVÁ, M.; BEDNAŘÍKOVÁ, V.; DVOŘÁK, K.; KOMAROV, P.; ZÁBRANSKÝ, K. Microstructure of Mo-La2O3 Composite Powder Prepared Using Two Different High Energy Ball Milling Systems. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 109-114. ISSN: 1012-0394.
    Detail | WWW

    KASHIMBETOVA, A.; TKACHENKO, S.; REMEŠOVÁ, M.; MATA-LEIJA, A.; GEJDOŠ, P.; ČELKO, L.; MONTUFAR JIMENEZ, E. Correlating the Microstructure with the Mechanical Behaviour of Titanium Structures Produced by Robotic Assisted Deposition. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 26-30. ISSN: 1012-0394.
    Detail | WWW

    ČELKO, L.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; CASAS LUNA, M.; KLAKURKOVÁ, L.; ZÁBRANSKÝ, K.; HOLEMÝ, D.; ŠVEJCAR, J. Surface Modification of Alumina Particles to Enhance Bonding Properties with Rubber and Resin in Grinding Tools. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 57-62. ISSN: 1012-0394.
    Detail | WWW

    BEDNAŘÍKOVÁ, V.; KLAKURKOVÁ, L.; REMEŠOVÁ, M.; HORYNOVÁ, M.; SUCHÝ, J.; PALOUŠEK, D.; ČELKO, L. In Vitro Corrosion Study of Selected Laser Melted WE43 Magnesium Alloy in Hank´s Balanced Salt Solution. In Key Engineering Materials. Key Engineering Materials (web). Switzerland: Trans Tech Publications Ltd, 2022. p. 113-118. ISSN: 1662-9795.
    Detail

    DÍAZ DE LA TORRE, S.; MUNOZ-JUAREZ, I.; MENDEZ-GARCIA, J.; GONZALEZ-CORRAL, G.; CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; OLIVER-URRUTIA, C.; PINA-BARBA, M.; ČELKO, L. Spark plasma extrusion of binder free hydroxyapatite powder. Nanotechnology Reviews, 2022, vol. 11, no. 1, p. 2295-2303. ISSN: 2191-9089.
    Detail | WWW | Full text in the Digital Library

    TRAJIC, J.; CURCIC, M.; CASAS LUNA, M.; ROMCEVIC, M.; REMEŠOVÁ, M.; BALAZ, M.; ČELKO, L.; DVOŘÁK, K.; ROMCEVIC, N. Vibrational properties of the mechanochemically synthesized Cu2SnS3: Raman study. Journal of Raman Spectroscopy, 2022, vol. 53, no. 5, p. 977-987. ISSN: 1097-4555.
    Detail | WWW

    LOKESHKUMAR, E.; KASHIMBETOVA, A.; SHISHIR, R.; MANOJKUMAR, P.; RAVISANKAR, B.; MONTUFAR JIMENEZ, E.; ČELKO, L.; RAMESHBABU, N. Development of TiO2-HA Coatings by PEO on Titanium Scaffolds Fabricated by Direct Ink Writing. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2022, vol. 2022, no. 8, ISSN: 0972-2815.
    Detail | WWW

    TKACHENKO, S.; BRODNIKOVSKYI, D.; ČÍŽEK, J.; KOMAROV, P.; BRODNIKOVSKYI, Y.; TYMOSHENKO, Y.; CSAKI, S.; PINCHUK, M.; VASYLYEV, O.; ČELKO, L.; GADZYRA, M.; ; CHRÁSKA, T.;. Novel Ti-Si-C composites for SOFC interconnect materials: Production optimization. CERAMICS INTERNATIONAL, 2022, vol. 48, no. 19, p. 27785-27798. ISSN: 1873-3956.
    Detail | WWW

    BALÁŽ, M.; TKÁČIKOVÁ, L.; STAHORSKÝ, M.; CASAS LUNA, M.; DUTKOVÁ, E.; ČELKO, L.; KOVÁČOVÁ, M.; ACHIMOVIČOVÁ, M.; BALÁŽ, P. Ternary and Quaternary Nanocrystalline Cu-Based Sulfides as Perspective Antibacterial Materials Mechanochemically Synthesized in a Scalable Fashion. ACS OMEGA, 2022, no. 7, p. 27164-27171. ISSN: 2470-1343.
    Detail | WWW

    HYMPANOVA, M.; OLIVER-URRUTIA, C.; VOJTA, M.; MACHÁČEK, M.; KŘUPKA, P.; KUKLA, R.; ČELKO, L.; MONTUFAR, E. B.; MAREK, J. Assessment of Streptococcus mutans biofilm formation on calcium phosphate ceramics: The role of crystalline composition and microstructure. BIOMATERIALS ADVANCES, 2022, vol. 135, no. 212750, ISSN: 2772-9508.
    Detail | WWW

    KASHIMBETOVA, A.; SLÁMEČKA, K.; CASAS LUNA, M.; OLIVER-URRUTIA, C.; RAVASZOVÁ, S.; DVOŘÁK, K.; ČELKO, L.; MONTUFAR JIMENEZ, E. Implications of unconventional setting conditions on the mechanical strength of synthetic bone grafts produced with self-hardening calcium phosphate pastes. Ceramics International, 2022, vol. 48, no. 2022, p. 6225-6235. ISSN: 0272-8842.
    Detail | WWW

    VRAŽINA, T.; ŠULÁK, I.; POLOPRUDSKÝ, J.; ZÁBRANSKÝ, K.; GEJDOŠ, P.; HADRABA, H.; ČELKO, L. Influence of the Deposition Parameters on Microstructure anad Properties of HVOF Sprayed WC-CrC-Ni Coating. In Proceedings 31st International Conference on Metallurgy and Materials. 28th International Conference on Metallurgy and Materials. Tanger Ltd., 2022. p. 487-492. ISBN: 978-80-88365-06-8. ISSN: 2694-9296.
    Detail | WWW

    OLIVER URRUTIA, C.; KASHIMBETOVA, A.; SLÁMEČKA, K.; ČELKO, L.; MONTUFAR JIMENEZ, E. Robocasting Additive Manufacturing of Titanium and Titanium Alloys: A Review. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2022, no. September, p. 1-14. ISSN: 0972-2815.
    Detail | WWW

    ČELKO, L.; TKACHENKO, S.; CASAS LUNA, M.; DYČKOVÁ, L.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; KOMAROV, P.; DEÁK, A.; BALÁŽ, M.; CRAWFORD, D.; DÍAZ DE LA TORRE, S.; BODOKI, E.; CIHLÁŘ, J. High-energy ball milling and spark plasma sintering of molybdenum - lanthanum oxide (Mo-La2O3) and molybdenum - lanthanum zirconate (Mo-La2Zr2O7) composite powders. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, vol. 102, no. 1, p. 1-13. ISSN: 0263-4368.
    Detail | WWW | Full text in the Digital Library

    PRADHAN, G.; CELEGATO, F.; BARRERA, G.; OLIVETTI, E.S.; COISSON, M.; HAJDUČEK, J.; ARREGI URIBEETXEBARRIA, J.; ČELKO, L.; UHLÍŘ, V.; RIZZI, P.; TIBERTO, P. Magnetic properties of FeGa/Kapton for flexible electronics. Scientific Reports, 2022, vol. 12, no. 1, p. 17503 ( p.)ISSN: 2045-2322.
    Detail | WWW

    CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; HORT, N.; DÍAZ DE LA TORRE, S.; MENDEZ-GARCIA, J.; VIŠTEJNOVÁ, L.; BŘÍNEK, A.; DAŇHEL, A.; DVOŘÁK, K.; KAISER, J.; ČELKO, L. Degradable magnesium-hydroxyapatite interpenetrating phase composites processed by current assisted metal infiltration in additive-manufactured porous preforms. Journal of Magnesium and Alloys, 2022, vol. 10, no. 12, p. 3641-3656. ISSN: 2213-9567.
    Detail | WWW

    BALÁŽ, M.; CASAS LUNA, M.; AUGUSTINYAK, A.; TKÁCIKOVÁ, L; SZMUC, K.; KOVÁČOVÁ, M.; ČELKO, L.; SHPOTYUK, Y. Hybrid Ag-0/Ag2CO3-eggshell-plant nanocomposites for antimicrobial action prepared by bio-mechanochemical synthesis. Applied Nanoscience, 2022, vol. 12, no. 6, p. 1899-1916. ISSN: 2190-5517.
    Detail | WWW

  • 2021

    SOPHA, H.; KASHIMBETOVA, A.; HROMÁDKO, L.; SALDAN, I.; ČELKO, L.; MONTUFAR JIMENEZ, E.; MACÁK, J. Anodic TiO2 Nanotubes on 3D-Printed Titanium Meshes for Photocatalytic Applications. Nano Letters, 2021, vol. 21, no. 20, p. 8701-8706. ISSN: 1530-6992.
    Detail | WWW | Full text in the Digital Library

    ČELKO, L.; GUTIÉRREZ CANO, V.; CASAS LUNA, M.; MATULA, J.; OLIVER-URRUTIA, C.; REMEŠOVÁ, M.; DVOŘÁK, K.; ZIKMUND, T.; KAISER, J.; MONTUFAR JIMENEZ, E. Characterization of porosity and hollow defects in ceramic objects built by extrusion additive manufacturing. Additive Manufacturing, 2021, vol. 47, no. 1, p. 1-12. ISSN: 2214-8604.
    Detail | WWW

    HERNANDEZ TAPIA, L.; CARRANZA-TREJO, A.; KASHIMBETOVA, A.; TKACHENKO, S.; KOLEDOVÁ, Z.; KOUTNÝ, D.; MALÝ, M.; ČELKO, L.; MONTUFAR JIMENEZ, E. Microstructure of Selective Laser Melted Titanium Lattices and In Vitro Cell Behaviour. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1179-1185. ISBN: 978-80-87294-99-4.
    Detail | WWW | Full text in the Digital Library

    KOMAROV, P.; JECH, D.; TKACHENKO, S.; SLÁMEČKA, K.; DVOŘÁK, K.; ČELKO, L. Wetting Behavior of Wear-Resistant WC-Co-Cr Cermet Coatings Produced by HVOF: The Role of Chemical Composition and Surface Roughness. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2021, no. 9, p. 1-19. ISSN: 1059-9630.
    Detail | WWW

    BALÁŽ, M.; CASAS LUNA, M.; REMEŠOVÁ, M.; ČELKO, L.; TKÁČIKOVÁ, Ľ.; KOVÁČOVÁ, M.; SHPOTYUK, Y. Bio-mechanochemical synthesis of antibacterially active nanocomposite based on Ag nanoparticles, eggshell waste and Thymus serpyllum, L. plant. Nanotechnology and Nanomaterials 2021. 1. Lviv, Ukaine: International Science and Innovation cooperation, 2021. p. 478-478. ISBN: 978-966-97587-3-6.
    Detail | WWW

    BALÁŽ, M.; DŽUNDA, R.; DANEU, N.; SHALABAYEV, Z.; KHAN, N.; TATYKAYEV, B.; MUDRINIĆ, T.; CASAS LUNA, M.; ČELKO, L. Bio Applications of Nanoparticles/Biosensing. NANOCON 2021 - Abstracts. 1. Ostrava: Tanger Ltd., 2021. p. 50-50. ISBN: 978-80-88365-00-6.
    Detail

    KOVÁČOVÁ, M.; BALÁŽ, M.; YANKOVYCH, H.; CASAS LUNA, M.; REMEŠOVÁ, M.; ČELKO, L. Adsorption of Copper Ions on Thymus Serpyllum L. Plant for the production of nanocrystalline compound. Nanotechnology and Nanomaterials 2021. 1. Lviv, Ukaine: International Science and Innovation cooperation, 2021. p. 483-483. ISBN: 978-966-97587-3-6.
    Detail | WWW

    KOVÁČOVÁ, M.; YANKOVYCH, H.; CASAS LUNA, M.; REMEŠOVÁ, M.; FINDORÁKOVÁ, L.; STAHORSKÝ, M.; ČELKO, L.; BALÁŽ, M. Adsorption of Copper and Lead Ions on Thymus Serpyllum L. Plant. NANOCON 2021 - Abstracts. 1. Ostrava: Tanger Ltd., 2021. p. 40-40. ISBN: 978-80-88365-00-6.
    Detail

    KASHIMBETOVA, A.; TKACHENKO, S.; SLÁMEČKA, K.; REMEŠOVÁ, M.; KLAKURKOVÁ, L.; PAVLOUŠKOVÁ, Z.; ČELKO, L.; MONTUFAR JIMENEZ, E. Extrusion, Debinding and Sintering of a Commercial Pure Titanium Ink for Robocasting. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1215-1221. ISBN: 978-80-87294-99-4.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; KASHIMBETOVA, A.; GEJDOŠ, P.; OLIVER-URRUTIA, C.; CASAS LUNA, M.; JULIŠ, M.; MONTUFAR JIMENEZ, E.; ČELKO, L. Effects of the Heat Treatment Temperature on Composition, Microstructure and In Vitro Mineralization of Alkali Treated Titanium. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1186-1191. ISBN: 978-80-87294-99-4.
    Detail | WWW | Full text in the Digital Library

    DEÁK, A.; JOBBÁGY, C.; DEMETER, A.; ČELKO, L.; CIHLÁŘ, J.; SZABÓ, P.; ÁBRÁNYI-BALOGH, P.; CRAWFORD, D.; VIRIEUX, D.; COLACINO, E. Mechanochemical synthesis of mononuclear gold(I) halide complexes of diphosphine ligands with tuneable luminescent properties. Dalton Transactions, 2021, vol. 50, no. 38, p. 13337-13344. ISSN: 1477-9234.
    Detail | WWW | Full text in the Digital Library

    OLIVER, C.; IBAÑEZ, R.; FLORES-MERINO, M.; VOJTOVÁ, L.; ŠALPLACHTA, J.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E. Lyophilized Polyvinylpyrrolidone Hydrogel for Culture of Human Oral Mucosa Stem Cells. Materials, 2021, vol. 14, no. 1, p. 1-14. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    SALAJKOVÁ, Z.; HOLÁ, M.; PROCHAZKA, D.; ONDRAČEK, J.; PAVLIŇÁK, D.; ČELKO, L.; GREGAR, F.; ŠPERKA, P.; POŘÍZKA, P.; KANICKÝ, V.; DE GIACOMO, A.; KAISER, J. Influence of sample surface topography on laser ablation process. Talanta, 2021, vol. 222, no. 121512, p. 1-9. ISSN: 0039-9140.
    Detail | WWW

    CIHLÁŘ, J.; TINOCO NAVARRO, L.; ČÁSTKOVÁ, K.; MICHALIČKA, J.; KAŠTYL, J.; ČELKO, L.; KAŠPÁREK, V.; CIHLÁŘ, J. Influence of LA/Ti molar ratio on the complex synthesis of anatase/brookite nanoparticles and their hydrogen production. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2021, vol. 46, no. 12, p. 2-14. ISSN: 0360-3199.
    Detail | WWW

    SUCHÝ, J.; KLAKURKOVÁ, L.; MAN, O.; REMEŠOVÁ, M.; HORYNOVÁ, M.; PALOUŠEK, D.; KOUTNÝ, D.; KRIŠTOFOVÁ, P.; VOJTĚCH, D.; ČELKO, L. Corrosion behaviour of WE43 magnesium alloy printed using selective laser melting in simulation body fluid solution. Journal of Manufacturing Processes, 2021, vol. 69, no. 1, p. 556-566. ISSN: 1526-6125.
    Detail | WWW

    HLINÁKOVÁ, K.; MONTUFAR JIMENEZ, E.; LYSÁKOVÁ, K.; PETRUŠ, J.; POLÁČEK, P.; ESPANOL, M.; GINEBRA, M.; ČELKO, L.; KAISER, J.; VOJTOVÁ, L. Thixotropic copolymer as binder for the robocasting of self-setting bone tissue engineering scaffolds. eCM Periodical. eCM Meeting Abstracts, 2021. p. 46-46. ISSN: 2522-235X.
    Detail | WWW

  • 2020

    REMEŠOVÁ, M.; TKACHENKO, S.; KVARDA, D.; ROČŇÁKOVÁ, I.; GOLLAS, B.; MENELAOU, M.; ČELKO, L.; KAISER, J. Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy. Applied Surface Science, 2020, vol. 513, no. 145780, p. 1-10. ISSN: 0169-4332.
    Detail | WWW

    HERNANDEZ TAPIA, L.; FOHLEROVÁ, Z.; ŽÍDEK, J.; ALVAREZ-PEREZ, M.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E. Effects of Cryopreservation on Cell Metabolic Activity and Function of Biofabricated Structures Laden with Osteoblasts. Materials, 2020, vol. 13, no. 8, p. 1-14. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    RAVASZOVÁ, S.; DVOŘÁK, K.; SKALKA, P.; CASAS LUNA, M.; ČELKO, L. SYNTHESIS AND PHYSICOCHEMICAL PROPERTIES OF AN ADVANCED BaO-MgO-Al2O3-SiO2 SYSTEM AS AN ATTRACTIVE PROTECTIVE-COATING MATERIAL. Materiali in tehnologije, 2020, vol. 54, no. 6, p. 873-877. ISSN: 1580-2949.
    Detail | WWW

    VALOVÁ, K.; MONTUFAR JIMENEZ, E.; LYSÁKOVÁ, K.; POLÁČEK, P.; PETRUŠ, J.; GINEBRA, M.; ČELKO, L.; KAISER, J.; VOJTOVÁ, L. Využití biodegradabilního kopolymeru jako pojiva pro 3D tisk kompozitních kostních náhrad. Czech Chemical Society Symposium Series. Praha: Česká společnost chemická, 2020. p. 193-193. ISSN: 2336-7210.
    Detail | WWW

    CASAS LUNA, M.; TORRES RODRÍGUEZ, J.; Valdés-Martínez, O. U.; Obradović, N.; SLÁMEČKA, K.; MACA, K.; KAISER, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. Ceramics International, 2020, vol. 46, no. 7, p. 8853-8861. ISSN: 0272-8842.
    Detail | WWW

    HOLÁ, M.; SALAJKOVÁ, Z.; HRDLIČKA, A.; ONDRÁČEK, J.; NOVOTNÝ, K.; PAVLIŇÁK, D.; VOJTÍŠEK-LOM, M.; ČELKO, L.; POŘÍZKA, P.; KANICKÝ, V.; PROCHAZKA, D.; NOVOTNÝ, J.; KAISER, J. The effect of nanoparticle presence on aerosol formation during nanoparticle-enhanced laser ablation inductively coupled plasma mass spectrometry. Journal of Analytical Atomic Spectrometry, 2020, vol. 35, no. 12, p. 2893-2900. ISSN: 1364-5544.
    Detail | WWW

    RAVASZOVÁ, S.; DVOŘÁK, K.; SKALKA, P.; CASAS LUNA, M.; JECH, D.; ČELKO, L. Syntéza a stanovenie fyzikálno-chemických vlastností pokročilého systému BAO-MGO-AL2O3-SIO2 ako ochranného náterového materiálu. JUNIORSTAV 2020. Brno: 2020. p. 606-611. ISBN: 978-80-86433-73-8.
    Detail

    SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling behaviour of plasma-sprayed thermal barrier coatings with pre-oxidized NiCrAlY and NiCoCrAlY bond-coats. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 439-444. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; CASAS LUNA, M.; SKALKA, P.; RAMIREZ-CEDILLO, E.; ZBONČÁK, M.; KAISER, J.; ČELKO, L. Factors governing the dimensional accuracy and fracture modes under compression of regular and shifted orthogonal scaffolds. Journal of the European Ceramic Society, 2020, vol. 40, no. 14, p. 4923-4931. ISSN: 0955-2219.
    Detail | WWW | Full text in the Digital Library

    MONTUFAR JIMENEZ, E.; TKACHENKO, S.; CASAS LUNA, M.; ŠKARVADA, P.; SLÁMEČKA, K.; DÍAZ DE LA TORRE, S.; KOUTNÝ, D.; PALOUŠEK, D.; KOLEDOVÁ, Z.; HERNÁNDEZ-TAPIA, L.; ZIKMUND, T.; ČELKO, L.; KAISER, J. Benchmarking of additive manufacturing technologies for commercially-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. Additive Manufacturing, 2020, vol. 36, no. 101516, p. 1-13. ISSN: 2214-8604.
    Detail | WWW

    CASAS LUNA, M.; RAVASZOVÁ, S.; SKALKA, P.; GEJDOŠ, P.; JECH, D.; SLÁMEČKA, K.; KAISER, J.; DVOŘÁK, K.; ČELKO, L. Thermal cycling effect on the phase stability and fracture resistance of synthetic barium/magnesium aluminosilicate systems. Ceramics International, 2020, vol. 46, no. 15, p. 24129-24136. ISSN: 0272-8842.
    Detail | WWW

    SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 2020, vol. 384, no. 125328, p. 1-13. ISSN: 0257-8972.
    Detail | WWW

    SUCHÝ, J.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; PALOUŠEK, D.; KOUTNÝ, D.; ČELKO, L. Effect of Laser Parameters on Processing of Biodegradable Magnesium Alloy WE43 via Selective Laser Melting Method. Materials, 2020, vol. 13, no. 11, p. 1-17. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    JECH, D.; ČELKO, L.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CTIBOR, P. Influence of isothermal oxidation on microstructure of YSZ and Mullite-YSZ thermal barrier coatings. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 378-383. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    ČELKO, L.; JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; ROČŇÁKOVÁ, I. Technologie žárových nástřiků. Strojárstvo/Strojírenství, 2020, vol. 3864, no. 9, p. 1-5. ISSN: 1335-2938.
    Detail | WWW

    ŠULÁK, I.; OBRTLÍK, K.; HUTAŘOVÁ, S.; JULIŠ, M.; PODRÁBSKÝ, T.; ČELKO, L. Low cycle fatigue and dwell-fatigue of diffusion coated superalloy Inconel 713LC at 800 °C. MATERIALS CHARACTERIZATION, 2020, vol. 110599, no. 169, p. 1-13. ISSN: 1044-5803.
    Detail | WWW

    DZUROV, M.; MONTUFAR JIMENEZ, E.; VALOVÁ, K.; LYSÁKOVÁ, K.; ČELKO, L.; KAISER, J.; RAMPICHOVÁ, M.; VOJTOVÁ, L.; BUZGO, M. RESORBABLE POLYMER-PHOSPHATE BONE CEMENT: THE EFFECT OF MICROFIBERS MODIFICATION. Czech Chemical Society Symposium Series. Praha: Chemické listy, 2020. p. 255-255. ISSN: 2336-7210.
    Detail | WWW

    ČELKO, L.; SKALKA, P.; SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; ROČŇÁKOVÁ, I.; ŠVEJCAR, J.; HOLEMÝ, D.; KAISER, J. The Influence of Surface Dipping and Bulk Filling Agents on Properties of High-Speed Grinding Wheels: Materialographic-Based Numerical Modelling. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 43-47. ISSN: 1662-9507.
    Detail | WWW

    PAVLOUŠKOVÁ, Z.; JECH, D.; KOMAROV, P.; ROČŇÁKOVÁ, I.; DYČKOVÁ, L.; REMEŠOVÁ, M.; ČELKO, L.; HOLEMÝ, D. Characterization of High-Speed Alumina Abrasive Grinding Wheel. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 365-369. ISSN: 1662-9507.
    Detail | WWW

    BEDNAŘÍKOVÁ, V.; JECH, D.; KLAKURKOVÁ, L.; ČELKO, L.; HOLEMÝ, D. Structure and Properties of Bakelite Bonded Grinding Wheels. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 139-144. ISSN: 1662-9507.
    Detail | WWW

    KOMAROV, P.; JECH, D.; ČELKO, L.; PIJÁKOVÁ, B.;Zhou, D.; Vaẞen, R. Influence of RF Plasma Jet Surface Treatment on Wetting Behavior of Yttria Stabilized Zirconia SPS Coatings. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 423-429. ISSN: 1662-9507.
    Detail | WWW

    JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; DYČKOVÁ, L.; SLÁMEČKA, K.; RAVASZOVÁ, S.; DVOŘÁK, K.; ČELKO, L. Thermal Cyclic Behaviour of Conventional YSZ and Mullite-YSZ Thermal Barrier Coatings. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 417-422. ISSN: 1662-9507.
    Detail | WWW

    PÁLENÍČEK, M.; PAPULA, M.; REMEŠOVÁ, M.; JECH, D.; ROČŇÁKOVÁ, I.; ČELKO, L. Anodizing of Pure Magnesium in Sodium Hydroxide Electrolyte Solution. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 440-444. ISSN: 1662-9507.
    Detail | WWW

    ČELKO, L.; JECH, D.; TKACHENKO, S.; KOMAROV, P.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CTIBOR, P. Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Sisicate Attack. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 360-365. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

  • 2019

    DYČKA, M.; JECH, D.; ROČŇÁKOVÁ, I.; REMEŠOVÁ, M.; DYČKOVÁ, L.; HOLEMÝ, D.; ČELKO, L. Porovnání měřících metod pro stanovení porozity žárovzdorných výrobků s širokou velikostí distribucí pórů. In Hutní keramika 2019. Ostrava: Tanger, spol. s r. o., 2019. p. 68-74. ISBN: 978-80-87294-93-2.
    Detail

    TORRES RODRÍGUEZ, J.; KALMÁR, J.; MENELAOU, M.; ČELKO, L.; DVOŘÁK, K.; CIHLÁŘ, J.; CIHLÁŘ, J.; KAISER, J.; GYŐRI, E.; VERES, P.; FÁBIÁN, I.; LÁZÁR, I. Heat treatment induced phase transformations in zirconia and yttriastabilized zirconia monolithic aerogels. JOURNAL OF SUPERCRITICAL FLUIDS, 2019, vol. 149, no. 1, p. 54-63. ISSN: 0896-8446.
    Detail | WWW | Full text in the Digital Library

    ZIEGELHEIM, J.; LOMBARDI, L.; ČESÁNEK, Z.; HOUDKOVÁ, Š.; SCHUBERT, J.; JECH, D.; ČELKO, L.; PALA, Z. Abradable Coatings for Small Turboprop Engines: A Case Study of Nickel-Graphite Coating. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2019, no. 1, p. 1-9. ISSN: 1059-9630.
    Detail | WWW

    ČELKO, L.; MENELAOU, M.; CASAS LUNA, M.; HORYNOVÁ, M.; MUSÁLEK, T.; REMEŠOVÁ, M.; DÍAZ DE LA TORRE, S.; MORSI, K.; KAISER, J. Spark Plasma Extrusion and the Thermal Barrier Concept. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2019, vol. 50, no. 2, p. 656-665. ISSN: 1073-5615.
    Detail | WWW

    SKALKA, P.; SLÁMEČKA, K.; MONTUFAR JIMENEZ, E.; ČELKO, L. Estimation of the effective elastic constants of bone scaffolds fabricated by direct ink writing. Journal of the European Ceramic Society, 2019, vol. 39, no. 4, p. 1586-1594. ISSN: 0955-2219.
    Detail | WWW | Full text in the Digital Library

    PIJÁKOVÁ, B.; VORÁČ, Z.; RÁHEĹ, J.; ZIKMUND, T.; ČELKO, L.; KAISER, J.; ALBERTI, M. Effect of Ceramic Additives on Hydrophobic Layer Electrodeposition. In XII. Conference on Pigments and binders. Pardubice: Chemagazín, 2019. p. 127-131. ISBN: 978-80-906269-4-2.
    Detail | WWW | Full text in the Digital Library

    JECH, D.; REMEŠOVÁ, M.; KOMAROV, P.; TKACHENKO, S.; ČESÁNEK, Z.; SCHUBERT, J.; HOUDKOVÁ, Š.; ČELKO, L. Evaluation of Microstructure, Phase Composition and Hardness of Alternative Abradable Ceramic Coating Systems Produced by Means of Atmospheric Plasma Spraying. In Binders, Materials and Technologies in Modern Construction V. Solid State Phenomena. Switzerland: Trans Tech Publications, 2019. p. 161-166. ISBN: 978-3-0357-1550-7. ISSN: 1662-9779.
    Detail

    DYČKOVÁ, L.; CASAS LUNA, M.; TORRES RODRÍGUEZ, J.; DYČKA, M.; JECH, D.; DVOŘÁK, K.; DEÁK, A.; ČELKO, L. The role of different high energy ball milling conditions of molybdenum powder on the resulting particles size and morphology. In Metal 2019. 1. Ostrava: Tanger Ltd., 2019. p. 1463-1469. ISBN: 978-80-87294-92-5.
    Detail | WWW | Full text in the Digital Library

    PALOUŠEK, D.; KOČICA, M.; PANTĚLEJEV, L.; KLAKURKOVÁ, L.; ČELKO, L.; KOUTNÝ, D.; KAISER, J. SLM process parameters development of Cu-alloy Cu7.2Ni1.8Si1Cr. RAPID PROTOTYPING JOURNAL, 2019, vol. 25, no. 2, p. 266-276. ISSN: 1355-2546.
    Detail | WWW

    HORYNOVÁ, M.; REMEŠOVÁ, M.; KLAKURKOVÁ, L.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; YAN, S.; ČELKO, L.; SONG, G. L. Design of tailored biodegradable implants: The effect of voltageon electrodeposited calcium phosphate Coatings on puremagnesium. Journal of the American Ceramic Society, 2019, vol. 102, no. 1, p. 123-135. ISSN: 0002-7820.
    Detail | WWW | Full text in the Digital Library

    TORRES RODRÍGUEZ, J.; GUTIÉRREZ CANO, V.; MENELAOU, M.; KAŠTYL, J.; CIHLÁŘ, J.; TKACHENKO, S.; GONZÁLEZ, J.; KALMÁR, J.; FÁBIÁN, I.; LÁZÁR, I.; ČELKO, L.; KAISER, J. Rare-Earth Zirconate Ln2Zr2O7 (Ln: La, Nd, Gd, and Dy) Powders, Xerogels, and Aerogels: Preparation, Structure, and Properties. Inorganic Chemistry, 2019, vol. 1, no. 1, p. 14467-14477. ISSN: 1520-510X.
    Detail | WWW

  • 2018

    SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with a crack at the TGO/bond-coat interface. Surface and Coatings Technology, 2018, vol. 337, no. 1, p. 321-334. ISSN: 0257-8972.
    Detail | WWW

    DVOŘÁK, K.; DOLÁK, D.; PALOUŠEK, D.; ČELKO, L.; JECH, D. The Effect of the Wear of Rotor Pins on Grinding Efficiency in a High-speed Disintegrator. Materials Science, 2018, vol. 24, no. 1, p. 29-34. ISSN: 1392-1320.
    Detail | WWW | Full text in the Digital Library

    MONTUFAR JIMENEZ, E.; CASAS LUNA, M.; HORYNOVÁ, M.; TKACHENKO, S.; FOHLEROVÁ, Z.; DÍAZ DE LA TORRE, S.; DVOŘÁK, K.; ČELKO, L.; KAISER, J. High strength, biodegradable and cytocompatible alpha tricalcium phosphate-iron composites for temporal reduction of bone fractures. Acta Biomaterialia, 2018, no. 70, p. 293-303. ISSN: 1742-7061.
    Detail | WWW | Full text in the Digital Library

    ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; JECH, D.; GEJDOŠ, P. Low cycle fatigue performance of Ni-based superalloy coated with complex thermal barrier coating. MATERIALS CHARACTERIZATION, 2018, no. 139, p. 347-354. ISSN: 1044-5803.
    Detail | WWW

    ROČŇÁKOVÁ, I.; SLÁMEČKA, K.; MONTUFAR JIMENEZ, E.; REMEŠOVÁ, M.; DYČKOVÁ, L.; BŘÍNEK, A.; JECH, D.; DVOŘÁK, K.; ČELKO, L.; KAISER, J. Deposition of Hydroxyapatite and Tricalcium Phosphate Coatings by Suspension Plasma Spraying: Effects of Torch Speed. Journal of the European Ceramic Society, 2018, vol. 38, no. 16, p. 5489-5496. ISSN: 0955-2219.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; HORYNOVÁ, M.; CASAS LUNA, M.; DÍAZ DE LA TORRE, S.; DVOŘÁK, K.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E. Strength and fracture mechanism of iron reinforced tricalcium phosphate cermet fabricated by spark plasma sintering. Journal of the mechanical behavior of biomedical materials, 2018, vol. 1, no. 81, p. 16-25. ISSN: 1751-6161.
    Detail | WWW | Full text in the Digital Library

    SALAJKOVÁ, Z.; HOLÁ, M.; HRDLIČKA, A.; POŘÍZKA, P.; NOVOTNÝ, K.; ČELKO, L.; ŠPERKA, P.; PROCHAZKA, D.; NOVOTNÝ, J.; MODLITBOVÁ, P.; KANICKÝ, V.; KAISER, J. Feasibility of nanoparticles enhanced laser ablation inductively coupled plasma mass spectrometry. 2018. p. 109-109.
    Detail

    DYČKOVÁ, L.; KOMAROV, P.; REMEŠOVÁ, M.; DYČKA, M.; DVOŘÁK, K.; MENELAOU, M.; ČELKO, L. Optimization of Molybdenum Powder Milling Parameters. ОБРАБОТКА МЕТАЛЛОВ, 2018, vol. 20, no. 3, p. 109-122. ISSN: 1994-6309.
    Detail | WWW

    TKACHENKO, S.; ČÍŽEK, J.; MUŠÁLEK, R.; DVOŘÁK, K.; SPOTZ, Z.; MONTUFAR JIMENEZ, E.; CHRÁSKA, T.; KŘUPKA, I.; ČELKO, L. Metal matrix to ceramic matrix transition via feedstock processing of SPS titanium composites alloyed with high silicone content. Journal of Alloys and Compounds, 2018, vol. 764, no. 1, p. 776-788. ISSN: 0925-8388.
    Detail | WWW | Full text in the Digital Library

    CASAS LUNA, M.; HORYNOVÁ, M.; TKACHENKO, S.; KLAKURKOVÁ, L.; ČELKO, L.; DÍAZ DE LA TORRE, S.; MONTUFAR JIMENEZ, E. Chemical stability of tricalcium phosphate - iron composite during spark plasma sintering. Journal of Composites Science, 2018, vol. 2, no. 3, p. 1-8. ISSN: 2504-477X.
    Detail | WWW | Full text in the Digital Library

    HOLÁ, M.; SALAJKOVÁ, Z.; HRDLIČKA, A.; POŘÍZKA, P.; NOVOTNÝ, K.; ČELKO, L.; ŠPERKA, P.; PROCHAZKA, D.; NOVOTNÝ, J.; MODLITBOVÁ, P.; KANICKÝ, V.; KAISER, J. Feasibility of Nanoparticle-Enhanced Laser Ablation Inductively Coupled Plasma Mass Spectrometry. Analytical Chemistry, 2018, no. 8, p. 1-6. ISSN: 1520-6882.
    Detail | WWW

    ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P.; JECH, D. High-Temperature Low-Cycle Fatigue Behaviour of MAR-M247 Coated with Newly Developed Thermal and Environmental Barrier Coating. Advances in Materials Science and Engineering, 2018, vol. 2018, no. 1, p. 1-8. ISSN: 1687-8434.
    Detail | WWW | Full text in the Digital Library

    REMEŠOVÁ, M.; ROČŇÁKOVÁ, I.; ČELKO, L.; KAISER, J. Vliv intermetalických částic na anodickou oxidaci hliníkové slitiny EN AW-1050. In Progresivní a netradiční technologie povrchových úprav. 1. Jaroměř: TISK AS, s. r. o., 2018. p. 87-89. ISBN: 978-80-87583-28-9.
    Detail

    TKACHENKO, S.; DVOŘÁK, K.; JECH, D.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; PALOUŠEK, D.; ČELKO, L. Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill. WEAR, 2018, vol. 412-413, no. 1, p. 49-59. ISSN: 0043-1648.
    Detail | WWW | Full text in the Digital Library

  • 2017

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; HORYNOVÁ, M.; ČELKO, L.; KAISER, J. Preparation of Metallographic Samples with Anodic Layers. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 106-110. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail | WWW

    ČELKO, L.; JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; ROČŇÁKOVÁ, I. Technologie žárových nástřiků: Aplikace, kvalita povlaků a rizika při jejich výrobě. Konstrukce Media, s.r.o., 2017, vol. 2017, no. 8, p. 1-5. ISSN: 1803-8433.
    Detail | WWW

    HORYNOVÁ, M.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; ČELKO, L. Influence of Microstructural Parameters on the Corrosion Resistance of 7075 Aluminium Alloy. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 303-307. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail | WWW

    JECH, D.; ČELKO, L.; HUZLÍK, R.; BULÍN, T.; KLAKURKOVÁ, L.; ŠVEJCAR, J.; KAISER, J. Enhancement of Magnetic Properties of 41CrMo4 Steel by Means of Diffusion Coatings. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 560-564. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail | WWW

    ČELKO, L.; JECH, D.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; KLAKURKOVÁ, L. Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium-Silicate Enviromental Barier Coatings. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 569-573. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail | WWW

    OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; ŠULÁK, I.; GEJDOŠ, P. Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C. Surface and Coatings Technology, 2017, vol. 318, no. 1, p. 374-381. ISSN: 0257-8972.
    Detail | WWW

    CASAS LUNA, M.; TKACHENKO, S.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; DÍAZ DE LA TORRE, S.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E. Interpenetrated Magnesium–Tricalcium Phosphate Composite: Manufacture, Characterization and In Vitro Degradation Test. Acta Metallurgica Sinica (English Letters), 2017, vol. 30, no. 4, p. 319-325. ISSN: 1006-7191.
    Detail | WWW | Full text in the Digital Library

    HORYNOVÁ, M.; KLAKURKOVÁ, L.; ŠVEJCAR, J.; JULIŠ, M.; GEJDOŠ, P.; ČELKO, L. Failure analysis of casing of draft tube of turbine used in hydropower plant. ENGINEERING FAILURE ANALYSIS, 2017, no. 82, p. 848-854. ISSN: 1350-6307.
    Detail | WWW

    KLAKURKOVÁ, L.; HORYNOVÁ, M.; JULIŠ, M.; GEJDOŠ, P.; SKALKA, P.; REMEŠOVÁ, M.; ČELKO, L. Failure analysis of massively failed compressed air cartridge. ENGINEERING FAILURE ANALYSIS, 2017, no. 82, p. 776-782. ISSN: 1350-6307.
    Detail | WWW

    KOMAROV, P.; ČELKO, L.; REMEŠOVÁ, M.; SKOROKHOD, K.; JECH, D.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MUŠÁLEK, R. The Role of Microstructure on Wettability of Plasma Sprayed Yttria Stabilized Zirconia Coatings. In Metal 2017 Conference Prosceedings. Ostrava: TANGER Ltd., 2017. p. 1116-1121. ISBN: 978-80-87294-79-6.
    Detail

    MONTUFAR JIMENEZ, E.; VOJTOVÁ, L.; ČELKO, L.; GINEBRA, M. P. Calcium Phosphate Foams: Potential Scaffolds for Bone Tissue Modeling in Three Dimensions. In Methods in Molecular Biology. 1612. Springer, 2017. p. 79-94. ISBN: 978-1-4939-7019-3.
    Detail | WWW

    ČELKO, L.; JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; DVOŘÁK, K.; ŠULÁK, I; SMETANA, B.; OBRTLÍK, K. Failure mechanism of yttria stabilized zirconia atmospheric plasma sprayed thermal barrier coatings subjected to calcia-magnesia-aluminosilicate environmental attack. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 39-44. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    JECH, D.; ČELKO, L.; KOMAROV, P.; ZIEGELHEIM, J.; ČESÁNEK, Z.; SHUBERT, J. The Role of Different Atmospheric Plasma Spray Parameters on Microstructure of Abradable AlSi-polyester Coatings. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 224-229. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    KOMAROV, P.; ČELKO, L.; JECH, D.; PAPULA, M.; SLÁMEČKA, K.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; KAISER, J. Investigations of Wettability of Wear Resistant Coatings Produced by Atmospheric Plasma Spraying. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 230-235. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    DYČKOVÁ, L.; KLAKURKOVÁ, L.; GEJDOŠ, P.; REMEŠOVÁ, M.; JULIŠ, M.; ČELKO, L. Causal analysis of damage of a cover. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 57-62. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; ROČŇÁKOVÁ, I.; DYČKOVÁ, L.; ČELKO, L.; KAISER, J. Application of Metallographic Analysis Techniques for Detection and Identification of Spray Paint Defects. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 118-123. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.
    Detail

    POŘÍZKA, P.; KASKI, S.; HRDLIČKA, A.; MODLITBOVÁ, P.; SLÁDKOVÁ, L.; HÄKKÄNEN, H.; PROCHAZKA, D..; NOVOTNÝ, J.; GADAS, P.; ČELKO, L.; NOVOTNÝ, K.; KAISER, J. Detection of fluorine using laser-induced breakdown spectroscopy and Raman spectroscopy. Journal of Analytical Atomic Spectrometry, 2017, vol. 32, no. 10, p. 1966-1974. ISSN: 1364-5544.
    Detail

    ČELKO, L.; JECH, D.; KOMAROV, P.; REMEŠOVÁ, M.; ROČŇÁKOVÁ, I. Technologie žárových nástřiků: Aplikace, kvalita povlaků a rizika při jejich výrobě. In Technologie, kvalita a rizika ve výrobě. Jaroměř: Kudláček, J., 2017. p. 49-53. ISBN: 978-80-87583-20- 3.
    Detail

    SLÁDKOVÁ, L.; PROCHAZKA, D.; POŘÍZKA, P.; ŠKARKOVÁ, P.; REMEŠOVÁ, M.; HRDLIČKA, A.; NOVOTNÝ, K.; ČELKO, L.; KAISER, J. Improvement of the Laser-Induced Breakdown Spectroscopy method sensitivity by the usage of combination of Ag-nanoparticles and vacuum conditions. Spectrochimica Acta Part B, 2017, no. 127, p. 48-55. ISSN: 0584-8547.
    Detail | WWW

    ČELKO, L.; JECH, D.; DVOŘÁK, K.; ŠULÁK, I.; KLAKURKOVÁ, L.; OBRTLÍK, K. Durability of Amorphous and Crystalline BMAS Thermal Barrier Coatings Produced by Plasma Spraying. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 383-386. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HORYNOVÁ, M.; ŠVEJCAR, J. Formation of Thermally Sprayed Coatings on Grid-like Structure Substrate. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 387-390. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW

    HORYNOVÁ, M.; CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; DÍAZ DE LA TORRE, S.; ČELKO, L.; KLAKURKOVÁ, L.; DIÉGUEZ-TREJO, G.; DVOŘÁK, K.; ZIKMUND, T.; KAISER, J. Fracture Mechanism of Interpenetrating Iron-Tricalcium Phosphate Composite. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 333-336. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW | Full text in the Digital Library

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; ČELKO, L.; SLÁDKOVÁ, L.; JECH, D.; KAISER, J. Anodizing of Zinc-Titanium Alloy in NaOH and KOH Baths. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 399-402. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW

    CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; GEJDOŠ, P.; KLAKURKOVÁ, L.; DÍAZ DE LA TORRE, S.; KAISER, J.; ČELKO, L. Tricalcium Phosphate - Magnesium Interface: Microstructure and Properties. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 412-415. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW | Full text in the Digital Library

    DÍAZ DE LA TORRE, S.; ČELKO, L.; CASAS LUNA, M.; MONTUFAR JIMENEZ, E. On the Preparation of Advanced Materials via Pulsed Electric Current Sintering Procedures. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 436-439. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; DATSKEVICH, O.; SPOTZ, Z.; DVOŘÁK, K.; KULAK, L.; ČELKO, L. Oxidation of Experimental Ti-Si-Al Based Alloys. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 391-394. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW

    ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P. Degradation of YSZ/EUCOR TBC Coating System during High Temperature Low Cycle Fatigue Tests. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 420-423. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW

    TKACHENKO, S.; DATSKEVICH, O.; DVOŘÁK, K.; SPOTZ, Z.; KULAK, L.; ČELKO, L. Isothermal oxidation behavior of experimental Ti-Al-Si alloys at 700 °C in air. Journal of Alloys and Compounds, 2017, vol. 694, no. 1, p. 1098-1108. ISSN: 0925-8388.
    Detail | WWW

    PAVLOUŠKOVÁ, Z.; KLAKURKOVÁ, L.; JULIŠ, M.; ČELKO, L.; ŠVEJCAR, J. Use of Metallographic Methods for Determining the Cause of Change Magnetic Properties of Austenitic Steels. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 219-224. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
    Detail | WWW

  • 2016

    Balagna, C., Fais, A., Brunelli, K., Peruzzo, L., Horynová, M., Čelko, L., Spriano, S. Electro-sinter-forged Ni–Ti alloy. INTERMETALLICS, 2016, vol. 68, no. 1, p. 31-41. ISSN: 0966-9795.
    Detail | WWW

    ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; ZIKMUND, T.; NOVOTNÝ, K.; KLAKURKOVÁ, L.; ČELKO, L.; SONG, G-L; KAISER, J. Assessment of localized corrosion under simulated physiological conditions of magnesium samples with heterogeneous microstructure: value of X-ray computed micro-tomography platform. CORROSION SCIENCE, 2016, vol. 104, no. 3, p. 187-196. ISSN: 0010-938X.
    Detail | WWW

    SLÁMEČKA, K.; SKALKA, P.; ČELKO, L.; POKLUDA, J.; SAUCEDO-MORA, L.; MARROW, T.; THANDAVAMOORTHY, U. Plasma-sprayed thermal barrier coatings: numerical study on damage localization and evolution. Frattura ed Integrita Strutturale, 2016, vol. 10, no. 35, p. 322-329. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    SLÁMEČKA, K.; SKALKA, P.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with an irregular top-coat/bond-coat interface. Surface and Coatings Technology, 2016, vol. 304, no. 1, p. 574-583. ISSN: 0257-8972.
    Detail | WWW

    ČELKO, L. Vyhodnocení dat a optimalizace software pro analýzy vzorků oceli zařízení Sci- Trace. 2016. p. 1 (1 s.).
    Detail

    HORYNOVÁ, M.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; ČELKO, L. Influence of Microstructural parameters on the Corrosion Resistance of Aluminium Alloy BS L170. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 98-98. ISBN: 978-80-553-2547- 7.
    Detail

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; HORYNOVÁ, M.; ČELKO, L.; KAISER, J. Preparation of Metallographic Samples with Anodizing Layers. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 133-133. ISBN: 978-80-553-2547- 7.
    Detail

    JECH, D.; ČELKO, L.; HUZLÍK, R.; BULÍN, T.; KLAKURKOVÁ, L.; ŠVEJCAR, J.; KAISER, J. Enhancement of Magnetic Properties of 41CrMo4 Steel by Means of Diffusion Coatings. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 134-134. ISBN: 978-80-553-2547- 7.
    Detail

    ČELKO, L.; JECH, D.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; KLAKURKOVÁ, L. Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium- Silicate Enviromental Barier Coatings. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 136-136. ISBN: 978-80-553-2547- 7.
    Detail

    PAVLOUŠKOVÁ, Z.; KLAKURKOVÁ, L.; JULIŠ, M.; ČELKO, L.; ŠVEJCAR, J. Use of Metallographic Methods for Determining the Cause of Change Magnetic Properties of Austenitic Steels. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 86-86. ISBN: 978-80-553-2547- 7.
    Detail

    ČELKO, L.; JECH, D.; DVOŘÁK, K.; ŠULÁK, I.; KLAKURKOVÁ, L.; OBRTLÍK, K. Durability of Amorphous and Crystalline BMAS Thermal Barrier Coatings Produced by Plasma Spraying. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 110-110. ISBN: 978-80-214-5357-9.
    Detail

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HORYNOVÁ, M.; ŠVEJCAR, J. Formation of Thermally Sprayed Coatings on Grid- like Structure Substrate. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 111-111. ISBN: 978-80-214-5357- 9.
    Detail

    HORYNOVÁ, M.; CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; DÍAZ DE LA TORRE, S.; ČELKO, L.; KLAKURKOVÁ, L.; DIÉGUEZ-TREJO, G.; DVOŘÁK, K.; ZIKMUND, T.; KAISER, J. Fracture Mechanism of Interpenetrating Iron- Tricalcium Phosphate Composite. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 105-105. ISBN: 978-80-214-5357- 9.
    Detail

    REMEŠOVÁ, M.; KLAKURKOVÁ, L.; ČELKO, L.; SLÁDKOVÁ, L.; JECH, D.; KAISER, J. Anodizing of Zinc- Titanium Alloy in NaOH and KOH Baths. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 115-115. ISBN: 978-80-214-5357- 9.
    Detail

    CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; GEJDOŠ, P.; KLAKURKOVÁ, L.; DÍAZ DE LA TORRE, S.; KAISER, J.; ČELKO, L. Structure and Properties of Calcium Phosphate - Magnesium Interface Processed by Spark Plasma Sintering. Materials Structure & Micromechanics of Fracture. Brno, Czech Republic: Brno University of Technology, 2016. p. 196-196. ISBN: 978-80-214-5357- 9.
    Detail

    DÍAZ DE LA TORRE, S.; ČELKO, L.; CASAS LUNA, M.; MONTUFAR JIMENEZ, E. On the Preparation of Advanced Materials via Electric Current Sintering Procedures. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 119-119. ISBN: 978-80-214-5357- 9.
    Detail

    ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P. High Temperature Degradation of YSZ/ EUCOR TBC Coating System during Low Cycle Fatigue Tests. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 219-219. ISBN: 978-80-214-5357- 9.
    Detail

    ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L. High-temperature low-cycle fatigue behaviour of HIP treated and untreated superalloy MAR-M247. KOVOVE MATERIALY-METALLIC MATERIALS, 2016, vol. 54, no. 6, p. 471-481. ISSN: 1338-4252.
    Detail | WWW

    ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L. Comparative Study of Microstructure and High Temperature Low Cycle Fatigue Behaviour of Nickel Base Superalloys Inconel 713LC and MAR-M247. In Advances in Fracture and Damage Mechanics XV. Key Engineering Materials (web). Switzerland: SloTrans Tech Publications, 2016. p. 86-89. ISSN: 1662-9795.
    Detail | WWW

    SLÁMEČKA, K.; SKALKA, P.; JECH, D.; KLAKURKOVÁ, L.; ČELKO, L. Critical Locations in Plasma Sprayed Thermal Barrier Coatings Due to Irregularities of Bond Coat Surface. In New Trends on Integrity Reliability Failure. Porto- Portugal: FEUP- INEGI, 2016. p. 387-388. ISBN: 978-989-98832-4- 6.
    Detail

    MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; CASAS LUNA, M.; DIAZ-DE-LA-TORRE, S.; ČELKO, L.; KLAKURKOVÁ, L.; SPOTZ, Z.; DIÉGUEZ-TREJO, G.; FOHLEROVÁ, Z.; DVOŘÁK, K.; ZIKMUND, T.; KAISER, J. Spark plasma sintering of load-bearing iron-carbon nanotube-tricalcium phosphate CerMets for orthopaedic applications. JOM, 2016, vol. 68, no. 4, p. 1134-1142. ISSN: 1047-4838.
    Detail | WWW

  • 2015

    SLÁMEČKA, K.; ČELKO, L.; SKALKA, P.; POKLUDA, J.; NĚMEC, K.; JULIŠ, M.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Bending fatigue failure of atmospheric-plasma-sprayed CoNiCrAlY + YSZ thermal barrier coatings. INTERNATIONAL JOURNAL OF FATIGUE, 2015, vol. 70, no. 1, p. 186-195. ISSN: 0142-1123.
    Detail

    JECH, D.; KLAKURKOVÁ, L.; ČELKO, L.; DOLEŽAL, P.; ŠVEJCAR, J. Chain Segment Analysis. In Přínos metalografie pro řešení výrobních problémů. 1. Praha: ČVUT v Praze, FS a Výzkumný a zkušební ústav Plzeň s. r. o., 2015. p. 139-144. ISBN: 978-80-01-05474- 1.
    Detail

    ŠULÁK, I.; OBRTLÍK, K.; HUTAŘOVÁ, S.; JULIŠ, M.; PODRÁBSKÝ, T.; ČELKO, L. Dwell effects on low cycle fatigue behaviour of diffusion coated nickel base superalloy IN 713LC at temperature of 800° C. Karlsruhe: 2015. p. 382-382.
    Detail

    SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Stability of plasma-sprayed thermal barrier coatings: The role of the waviness of the bond coat and the thickness of the thermally grown oxide layer. Surface and Coatings Technology, 2015, vol. 274, no. 1, p. 26-36. ISSN: 0257-8972.
    Detail

    ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P. EFFECT OF GRIT BLASTING SURFACE TREATMENT ON HIGH TEMPERATURE LOW, CYCLE FATIGUE LIFE OF INCONEL 713LC. In Multi Scale Design of Advanced Materials. Brno: 2015. p. 139-144. ISBN: 978-80-214-5146- 9.
    Detail

    OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.;ŠULÁK, I.; KLAKURKOVÁ, L.; JECH, D.; ŠKORÍK, V.; ŠVEJCAR, J. High temperature low cycle fatigue behavior of cast superalloy Inconel 713LC coated with ZrO2 -SiO2 - Al2O3 nanocrystalline thermal barrier coating. 2015. p. 141-141.
    Detail

    POŘÍZKA, P.; ROČŇÁKOVÁ, I.; KLUS, J.; PROCHAZKA, D.; SLÁDKOVÁ, L.; ŠPERKA, P.; SPOTZ, Z.; ČELKO, L.; NOVOTNÝ, K.; KAISER, J. Estimating the grade of Mg corrosion using Laser-Induced Breakdown Spectroscopy. Journal of Analalytical Atomic Spectrometry, 2015, vol. 2015, no. 7, p. 2099-2106. ISSN: 0267-9477.
    Detail | WWW

    KLAKURKOVÁ, L.; JULIŠ, M.; ČELKO, L.; HORYNOVÁ, M.; HÉGR, E.; ŠVEJCAR, J. Analysis of surface defects of aluminium components with hard anodized layers. ENGINEERING FAILURE ANALYSIS, 2015, vol. 56, no. 1, p. 300-306. ISSN: 1350-6307.
    Detail | WWW

    JECH, D.; KLAKURKOVÁ, L.; ČELKO, L.; DOLEŽAL, P.; ŠVEJCAR, J. Chain Segment Analysis. In Key Engineering Materials. Key Engineering Materials (print). Switzerland: Trans Tech Publication, 2015. p. 216-221. ISBN: 9783038354703. ISSN: 1013-9826.
    Detail | WWW

    ŠVEJCAR, J.; KLAKURKOVÁ, L.; STRÁNSKÝ, K.; SPOTZ, Z.; ČELKO, L. Assessment of the Causes of Indicated Defects in Forgings. In Key Engineering Materials. Key Engineering Materials (print). Switzerland: Trans Tech Publications Ltd, 2015. p. 205-209. ISBN: 9783038354703. ISSN: 1013-9826.
    Detail | WWW

    KLAKURKOVÁ, L.; ČELKO, L.; JULIŠ, M.; JECH, D.; ŠVEJCAR, J. Analysis of Coupling Segment of Belt Conveyor. In Key Engineering Materials. Key Engineering Materials (print). Switzerland: Trans Tech Publications Ltd, 2015. p. 210-215. ISBN: 9783038354703. ISSN: 1013-9826.
    Detail | WWW

    PAVLOUŠKOVÁ, Z.; MAN, O.; HORYNOVÁ, M.; ČELKO, L.; ŠVEJCAR, J. Analysis of Cracked Spring Washer for Sleeper-Rail Joints. In Key Engineering Materials. Key Engineering Materials (print). Switzerland: Trans Tech Publications Ltd, 2015. p. 222-227. ISBN: 9783038354703. ISSN: 1013-9826.
    Detail | WWW

    ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L. High Temperature Low Cycle Fatigue Characteristics of Grit Blasted Polycrystalline Ni-base Superalloy. Key Engineering Materials (print), 2015, vol. 665, no. 2016, p. 73-76. ISSN: 1013-9826.
    Detail

    ČELKO, L.; JECH, D.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; KAISER, J. Princip fukce tepelných bariér připravovaných žárovými nástřiky. Transfer, 2015, vol. 2015, no. 25, p. 42-45. ISSN: 1801- 9315.
    Detail | WWW

    SPOTZ, Z.; ČELKO, L.; ŠVEJCAR, J. Analysis of NiCrAl powder doped by Fe and Si after high temperature exposure. Kovové materiály, 2015, vol. 53, no. 6, p. 459-462. ISSN: 0023-432X.
    Detail | WWW

    POŘÍZKA, P.; PROCHAZKA, D.; ROČŇÁKOVÁ, I.; SPOTZ, Z.; KLUS, J.; NOVOTNÝ, J.; ČELKO, L.; NOVOTNÝ, K.; KAISER, J. Study of material degradation employing laser- induced breakdown spectroscopy. 2015.
    Detail

    ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; ZIKMUND, T.; NOVOTNÝ, K.; ČELKO, L.; KLAKURKOVÁ, L.; KAISER, J. Assessment of Magnesium Biodegradability by Micro- CT Platform. In 27th European Conference on Biomaterials - ESB 2015. 1000. Kraków, Poland: Polish Society for Biomaterials, 2015. p. 394-394. ISBN: 978-83-63663-63- 6.
    Detail | WWW

    MONTUFAR JIMENEZ, E.; MAAZOUZ, Y.; GONZALEZ, B. ČELKO, L.; KAISER, J.; GINEBRA, M.-P. Tailoring Porosity from the Nano- to the Macroscale of Low-Temperature Consolidated Robocasted Scaffolds. In 27th European Conference on Biomaterials - ESB 2015. 1000. Kraków, Poland: Polish Society for Biomaterials, 2015. p. 248-248. ISBN: 978-83-63663-63-6.
    Detail | WWW

    HORYNOVÁ, M.; JULIŠ, M.; ČELKO, L.; ŠVEJCAR, J. Failure analysis of induction hardened injector body. ENGINEERING FAILURE ANALYSIS, 2015, vol. 56, no. 1, p. 538-544. ISSN: 1350-6307.
    Detail | WWW

    PAVLOUŠKOVÁ, Z.; KLAKURKOVÁ, L.; MAN, O.; ČELKO, L.; ŠVEJCAR, J. Assessment of the cause of cracking of hydraulic hose clamps. ENGINEERING FAILURE ANALYSIS, 2015, vol. 56, no. 1, p. 14-19. ISSN: 1350-6307.
    Detail | WWW

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; DVOŘÁČEK, R.; ŠVEJCAR, J. Influence of Technological Parameters on a Quality of Atmospheric Plasma Sprayed Al2O3+ 13TiO2 and Cr2O3 Coatings. In Multi Scale Design of Advanced Materials. Brno: 2015. p. 123-130. ISBN: 978-80-214-5146- 9.
    Detail

  • 2014

    ŘIČÁNKOVÁ, V.; ČELKO, L.; ŠVEJCAR, J. Investigation of Changes in Microstructure of Remelted Air Plasma Sprayed NiCrAlY Coating after Thermal Exposure in Air with the Assistance of Microhardness Measurements. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. p. 226-229. ISBN: 9783037859346. ISSN: 1013-9826.
    Detail | WWW

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; DVOŘÁČEK, E.; ŠVEJCAR, J. Wear Resistant Coatings Deposited by Air Plasma Spraying Under Different Technological Parameters. In 46th International October Conference on Mining and Metallurgy - IOC 2014 – Proceedings. 46. Belegrade, Serbia: University of Belgrade - Technical Faculty in Bor, 2014. p. 659-662. ISBN: 978-86-6305-026- 6.
    Detail

    HUTAŘOVÁ, S.; OBRTLÍK, K.; JULIŠ, M.; ČELKO, L.; JULIŠOVÁ, M.; PODRÁBSKÝ, T. Degradation of TBC Coating during Low-cycle Fatigue Tests at High Temperature. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. p. 461-464. ISBN: 9783037859346. ISSN: 1013-9826.
    Detail | WWW

    JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. p. 567-572. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
    Detail | WWW

    ŠVEJCAR, J.; ČELKO, L.; DVOŘÁČEK, E.; KLAKURKOVÁ, L.; JULIŠ, M.; SLÁMEČKA, K.; ZAPLETAL, J. Thermal Spray Technology and Casting in Renovation of Friction Bearings Surface. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. p. 573-577. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
    Detail | WWW

    JULIŠ, M.; ČELKO, L.; SPOTZ, Z.; DOLEŽAL, P.; PAVLOUŠKOVÁ, Z.; ŠVEJCAR, J. Failure Analysis of Spherical Roller Bearing. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. p. 247-250. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
    Detail | WWW

    KLAKURKOVÁ, L.; HÉGR, E.; ČELKO, L.; PODRÁBSKÝ, T.; JULIŠ, M.; REMEŠOVÁ, M.; ŠVEJCAR, J. Comparative Analysis of Hard Anodized Layer on Aluminium Alloy. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. p. 615-618. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
    Detail

    ČELKO, L.; HUTAŘOVÁ, S.; OBRTLÍK, K.; PETRENEC, M.; JULIŠOVÁ, M.; PODRÁBSKÝ, T. Microstructural Characterization of Slurry Aluminide Diffusion Coatings. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publications, 2014. p. 584-589. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
    Detail | WWW

    OBRTLÍK, K.; HUTAŘOVÁ, S.; ČELKO, L.; JULIŠ, M.; PODRÁBSKÝ, T.; ŠULÁK, I. Effect of thermal barrier coating on low cycle fatigue behavioir of cast Inconel 713LC at 900 oC. In Advanced Materials Research. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 848-853. ISSN: 1022-6680.
    Detail | WWW

    ČELKO, L.; KLAKURKOVÁ, L.; SMETANA, B.; SLÁMEČKA, K.; ŽALUDOVÁ, M.; HUI, D.; ŠVEJCAR, J. Application of sacrificial coatings and effect of composition on Al-Al3NI Ultrafine eutectic formation. Journal of Mining and Metallurgy, Section B: Metallurgy, 2014, vol. 50, no. 1, p. 31-36. ISSN: 1450-5339.
    Detail | WWW | Full text in the Digital Library

    KLAKURKOVÁ, L.; ČELKO, L.; JULIŠ, M.; JECH, D.; ŠVEJCAR, J. Analysis of coupling segment of belt conveyor. In Přínos metalografie pro řešení výrobních problémů. Materials Science Forum. 1. Praha, Česká Republika: Česká technika - nakladatelství ČVUT v Praze, 2014. p. 133-138. ISBN: 978-80-01-05474-1. ISSN: 0255-5476.
    Detail

    ŠVEJCAR, J.; KLAKURKOVÁ, L.; STRÁNSKÝ, K.; SPOTZ, Z.; ČELKO, L. Assessment of the causes of indicated defects in forgings. In Přínos metalografie pro řešení výrobních problémů. 1. Praha, Česká Republika: Česká technika - nakladatelství ČVUT v Praze, 2014. p. 127-132. ISBN: 978-80-01-05474- 1.
    Detail

    VÍTKOVÁ, G.; PROKEŠ, L.; NOVOTNÝ, K.; POŘÍZKA, P.; NOVOTNÝ, J.; VŠIANSKÝ, D.; ČELKO, L.; KAISER, J. Comparative study on fast classification of brick samples by combination of principal component analysis and linear discriminant analysis using stand-off and table-top laser induced breakdown spectroscopy. Spectrochimica Acta Part B, 2014, vol. 101, no. 11, p. 191-199. ISSN: 0584-8547.
    Detail

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Microstructural Changes of Plasma Sprayed Al2O3-SiO2- ZrO2 Thermal Barrier Coatings After Isothermal Exposure. Paris: SAMPE, 2014.
    Detail

    ČELKO, L.; DÍAZ DE LA TORRE, S.; KLAKURKOVÁ, L.; KAISER, J.; SMETANA, B.; SLÁMEČKA, K.; ŽALUDOVÁ, M.; ŠVEJCAR, J. Temperature effect on the microstructural development of Al–Ni layered binary couples produced by an unconventional method. Surface and Coatings Technology, 2014, vol. 258, no. 1, p. 95-101. ISSN: 0257-8972.
    Detail | WWW

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SMETANA, B.; ŽALUDOVÁ, M.; ŠVEJCAR, J. Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloy. In Key Engineering Materials. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 513-516. ISBN: 9783037859346. ISSN: 1013-9826.
    Detail | WWW

    JECH, D.; ČELKO, L.; CHRÁSKA, T.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; DUBSKÝ, J.; ŠVEJCAR, J. Influence of Isothermal Exposure on Microstructural Changes Resulting in Delamination of Eutectic Al2O3+ZrO2+ SiO2 Thermal Barrier Coating. In Metal 2014. 1. Ostrava: TANGER Ltd., 2014. p. 885-890. ISBN: 978-80-87294-54- 3.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; JECH, D.; JULIŠ, M.; SLÁMEČKA, K.; ŠVEJCAR, J. Microstructure Development and Phlase Evolutin of Nickel Coated Aluminium and Hydronalium Substrates. In Metal 2014 Conference Prosceedings. 1. Ostrava: TANGER Ltd., 2014. p. 915-920. ISBN: 978-80-87294-54- 3.
    Detail

    KLAKURKOVÁ, L.; ČELKO, L.; JULIŠ, M.; JECH, D.; ŠVEJCAR, J. Analysis of Coupling Segment of Belt Conveyor. In Přínos metalografie pro řešení výrobních problémů. Praha: ČVUT v Praze, FS a Výzkumný a zkušební ústav Plzeň s. r. o., 2014. p. 133-138. ISBN: 978-80-01-05474- 1.
    Detail

    PAVLOUŠKOVÁ, Z.; MAN, O.; HORYNOVÁ, M.; ČELKO, L.; ŠVEJCAR, J. Analysis of Cracked Spring Washer for Sleeper- Rail Joints. In Přínos metalografie pro řešení výrobních problémů. Praha: ČVUT v Praze, FS a Výzkumný a zkušební ústav Plzeň s. r. o., 2014. p. 150-155. ISBN: 978-80-01-05474- 1.
    Detail

    ČELKO, L.; JECH, D.; CHRÁSKA, T.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; DUBSKÝ, J.; ŠVEJCAR, J. Formation and Growth of Thermally Grown Oxide in Two Different Atmospheric Plasma Sprayed Thermal Barrier Coating Systems. ICCE-22, Saint Julian´s, Malta, Proceedings. 22. Saint Julian´s, Malta: International Community for composites/ Nano Engineering, 2014. p. 145-146.
    Detail

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; DVOŘÁČEK, E.; ŠVEJCAR, J. Influence of Technological Parameters on a Quality of Atmospheric Plasma Sprayed Al2O3+13% TiO2 and Cr2O3 Coatings. Saint Julian´s, Malta: International Community for composites/ Nano Engineering, 2014. p. 401-402.
    Detail

    HORYNOVÁ, M.; ČELKO, L.; JECH, D.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Formation of Aluminide Diffusion Coatings by powder Mixture CVD Process. Saint Julian´s, Malta: International Community for composites/ Nano Engineering, 2014. p. 603-604.
    Detail

    PAVLOUŠKOVÁ, Z.; KLAKURKOVÁ, L.; JECH, D.; ČELKO, L.; ŠVEJCAR, J. Essessment of Heterogeneity Based on Distribution Coefficient. In 46th International October Conference on Mining and Metallurgy - IOC 2014 - Proceedings. 46. Belegrade, Serbia: University of Belgrade - Technical Faculty in Bor, 2014. p. 655-658. ISBN: 978-86-6305-026- 6.
    Detail

    ČELKO, L.; SMETANA, B.; KLAKURKOVÁ, L.; ZLÁ, S.; SLÁMEČKA, K.; ŠVEJCAR, J. Formation of Eutectic in Nickel Coated Hydronalium Alloy After the Heat Treatment. In 46th International October Conference on Mining and Metallurgy - IOC 2014 – Proceedings. 46. Belegrade, Serbia: University of Belgrade - Technical Faculty in Bor, 2014. p. 663-666. ISBN: 978-86-6305-026- 6.
    Detail

    SLÁMEČKA, K.; NĚMEC, K.; ČELKO, L.; HORNÍKOVÁ, J.; POKLUDA, J.; ŠVEJCAR, J. Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. p. 716-719. ISBN: 9783037859346. ISSN: 1013-9826.
    Detail | WWW

  • 2013

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; HUTAŘOVÁ, S.; JULIŠ, M.; ŠVEJCAR, J. Structural stability of plasma sprayed CoNiCrAlY – ZrO2+ Y2O3 thermal barrier coatings after isothermal exposure at 1050 C. In Metal 2013. 1. Ostrava: TANGER Ltd., 2013. p. 1015-1020. ISBN: 978-80-87294-41- 3.
    Detail

    JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 82-82. ISBN: 978-80-553-1412-9.
    Detail

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; PAVLOUŠKOVÁ, Z.; DVOŘÁČEK, E.; ŠVEJCAR, J. Influence of Technological Parameters on a Quality of Atmospheric Plasma Sprayed Coatings. YUCOMAT 2013, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2013. p. 21-21.
    Detail

    KLAKURKOVÁ, L.; HÉGR, E.; ČELKO, L.; PODRÁBSKÝ, T.; JULIŠ, M.; REMEŠOVÁ, M.; ŠVEJCAR, J. Comparative Analysis of Hard Anodized Layers on Aluminium Alloy. Abstract Booklet, 15th International Symposium on Metallography, METALLOGRAPHY 013. 1. Košice, Slovakia: Department of Materials Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 156-156. ISBN: 978-80-553-1412- 9.
    Detail

    ZIKMUND, T.; PETRILAK, M.; ČELKO, L.,; PROČEK, J.; KAISER, J. Rentgenová nano- a mikrotomografie pro analýzu odlitků. In Sborník přednášek z 50. slévárenských dnů, Blok A - Sekce technologická. 1. 2013. p. 44-49. ISBN: 978-80-02-02491- 0.
    Detail

    ČELKO, L.; JECH, D.; SKALKA, P.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; ŠVEJCAR, J. Microstructural Characterization of Thermally Grown Oxide in Atmospheric Plasma Sprayed Thermal Barier Coatings. ICCE-21, Tenerife, Proceedings. 1. Spain: Universidad de La Laguna, 2013. p. 1-2.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; JULIŠ, M.; JULIŠOVÁ, M.; ŠVEJCAR, J. Formation and Growth of Eutectic Layers in Nickel Coated Thick Aluminium- based Substrates. In 45th International October Conference of Mining and Mellurgy Proceedings. Serbia, Bor: University of Belgrade - Technical Faculty in Bor, 2013. p. 333-336. ISBN: 978-86-6305-012- 9.
    Detail

    PODRÁBSKÝ, T.; JULIŠ, M.; ČELKO, L.; KLAKURKOVÁ, L.; HUTAŘOVÁ, S. Phase Analysis of Aluminide Diffusion Coatings Produced ba Aluminizing of Nickel and Nickel- Based Alloys. YUCOMAT 2013, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2013. p. 74-74.
    Detail

    ČELKO, L.; HUTAŘOVÁ, S.; OBRTLÍK, K.; JULIŠOVÁ, M.; PODRÁBSKÝ, T. Microstructural Characterisations of Slurry Aluminide Diffusion Coatings. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 83-83. ISBN: 978-80-553-1412- 9.
    Detail

    ŠVEJCAR, J.; ČELKO, L.; KLAKURKOVÁ, L.; JULIŠ, M.; SLÁMEČKA, K.; ZAPLETAL, J. Thermal Spray Technology and Casting Renovation of Friction Bearing Surface. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 148-148. ISBN: 978-80-553-1412- 9.
    Detail

    KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; JULIŠ, M.; JULIŠOVÁ, M.; ŠVEJCAR, J. Formation and Morphology of Intermetallic Phases and Eutectic in Iron Coated Thick Aluminium Substrates. YUCOMAT 2013, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2013. p. 73-73.
    Detail

    JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; HUTAŘOVÁ, S.; JULIŠ, M.; ŠVEJCAR, J. Structural Stability of Plasma Sprayed CoNiCrAlY – ZrO2+ Y2O3 Thermal Barrier Coatings After Isothermal Exposure at 1050 C. Metal 2013. 1. Ostrava: TANGER Ltd., 2013. p. 73-73. ISBN: 978-80-87294-39- 0.
    Detail

  • 2012

    ŘIČÁNKOVÁ, V.; ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. MIKROSTRUCTURAL CHANGES OF AIR PLASMA SPRAYED CoNiCrAlY COATING AFTER REMELTING. In METAL 2012 Conference proceedings. 1. Ostrava: TANGER Ltd., 2012. p. 442-447. ISBN: 978-80-87294-29- 1.
    Detail

    ŘIČÁNKOVÁ, V.; ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. MODIFIKACE PLAZMOU NANÁŠENÝCH NICRALY POVLAKŮ. GRANT Journal, 2012, vol. 1, no. 1, p. 65-69. ISSN: 1805- 0638.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HUTAŘOVÁ, S.; JULIŠ, M.; NĚMEC, K.; PODRÁBSKÝ, T.; ŠVEJCAR, J. STRUCTURAL STABILITY OF THERMAL BARRIER COATINGS PRODUCED BY THERMAL SPRAYING. In METAL 2012 Conference proceedings. 1. Ostrava: TANGER Ltd., 2012. p. 998-1004. ISBN: 978-80-87294-29- 1.
    Detail | WWW

    OBRTLÍK, K.; HUTAŘOVÁ, S.; JULIŠ, M.; ČELKO, L.; PODRÁBSKÝ, T. Effect of Plasma sprayed AlSi coating on low cycle fatigue properties of cast superalloy Inconel 738LC. In METAL 2012 Conference proceedings. 1. Ostrava: TANGER Ltd., 2012. p. 1013-1018. ISBN: 978-80-87294-29- 1.
    Detail | WWW

    HODIS, Z.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K. Atlas of Materials Structures - Educational Software. Technológia vzdelávania, 2012, vol. 20, no. 2, p. 3-7. ISSN: 1335-003X.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; SMETANA, B.; SLÁMEČKA, K.; ŠVEJCAR, J.; ŽALUDOVÁ, M. Formation of Ultrafine Eutectic in Hypereutectic Alloys Produced by Heat Treatment of Nickel Coated. ICCE - 20. Beijing, China: State Key Lab Organic-Inorganic Composites, Beijing University of Chemical Technology, 2012. p. 94-96.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SMETANA, B.; ZLÁ, S.; ŽALUDOVÁ, M. Formation of Hypereutectic Aluminium- based Alloys or Nickel Aluminides Using Sacrificial Nickel Coatings. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 39-39.
    Detail | WWW

    DOLEŽAL, P.; ZAPLETAL, J.; KLAKURKOVÁ, L.; ČELKO, L.; PODRÁBSKÝ, T. Estabilishing of Optimum Forming Temterature on 100CrMo7-3 and 100CrMnSi6- 4 Bearing Steels under Partial Heating Conditions. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 98-98.
    Detail | WWW

    KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; DVOŘÁČEK, E.; PODRÁBSKÝ, T.; ŠVEJCAR, J. The Role of Technological Input Parameters on a Quality of Plasma Sprayed Thermal Barrier Coatings. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 83-83.
    Detail

    PODRÁBSKÝ, T.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; HUTAŘOVÁ, S.; ŠVEJCAR, J. Characterization of Slurry Aluminide Diffusion Coatins on Inconel 713LC. YUCOMAT 2012, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2012. p. 87-87.
    Detail | WWW

    HODIS, Z.; ČELKO, L. Multimediální učební pomůcky v materiálovém inženýrství. In MODERNIZACE VYSOKOŠKOLSKÉ VÝUKY TECHNICKÝCH PŘEDMĚTŮ. Modernizace vysokoškolské výuky technických předmětů. Hradec Králové: Gaudeamus, Univerzita Hradec Králové, 2012. p. 36-39. ISBN: 978-80-7435-110- 5. ISSN: 1214- 0554.
    Detail

  • 2011

    KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; DOLEŽAL, P.; ŠVEJCAR, J. Influence of Temperature on Microhardness of Aluminium-based composites Produced by Controlled Hypereutectic Reaction in Al- Ni Binary System. Chemické listy, 2011, vol. 105, no. S, p. 820-821. ISSN: 0009- 2770.
    Detail

    KLAKURKOVÁ, L.; ČELKO, L.; ZÁBRANSKÝ, K.; ŠVEJCAR, J. Analýza příčin poškození povlaků schodnice eskalátorů. In Přínos metalografie pro řešení výrobních problémů. Praha: ČVUT v Praze, Fakulta strojní a Škoda výzkum, s.r.o., 2011. p. 169-172. ISBN: 978-80-01-04822- 1.
    Detail

    SLÁMEČKA, K.; POKLUDA, J.; BONAVENTUROVÁ, K.; ČELKO, L. Microfractography of Fish- Eye Fractures in Nitrided Steel. Chemické listy, 2011, vol. 105, no. S, p. 721-724. ISSN: 0009- 2770.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; DVOŘÁČEK, E.; ŠVEJCAR, J. Metalografická analýza a tvrdost povlaků připravovaných žárovými technologiemi. In Přínos metalografie pro řešení výrobních problémů. Praha: ČVUT v Praze, Fakulta strojní a Škoda výzkum, s.r.o., 2011. p. 165-168. ISBN: 978-80-01-04822- 1.
    Detail

    HODIS, Z.; ČELKO, L.; JAN, V. Měření mikrotvrdosti v heterogenních svarových spojích. In Modernizace vysokoškolské výuky technických předmětů. Hradec Králové: Gaudeamus, Univerzita Hradec Králové, 2011. p. 36-39. ISBN: 978-80-7435-110- 5.
    Detail

    KLAKURKOVÁ, L.; ČELKO, L.; ZLÁ, S.; SMETANA, B. Formation of Hypereutectic Aluminium Alloy from Sacrificial Nickel Coating Investigated by Differential Thermal and Microstructural Analysis. YUCOMAT 2011. Belgrade, Serbia: IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2011. p. 103-103.
    Detail

    ŘIČÁNKOVÁ, V.; ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Modifikace plazmou nanášených NiCrAlY povlaků. In Víceúrovňový desig pokrokových materiálů 2011. Brno: ÚFM AVČR, 2011. p. 231-240. ISBN: 978-80-87434-04- 8.
    Detail

    ŘIČÁNKOVÁ, V.; ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. MODIFIKACE PLAZMOU NANÁŠENÝCH NICRALY POVLAKŮ. In Sborník příspěvků Mezinárodní Masarykovy konference pro doktorandy a mladé vědecké pracovníky 2011. Hradec Králové, ČR: MAGNANIMITAS, 2011. p. 231-240. ISBN: 978-86-80321-25- 7.
    Detail

    ČELKO, L.; ŘIČÁNKOVÁ, V.; KLAKURKOVÁ, L.; PODRÁBSKÝ, T.; DVOŘÁČEK, E.; ŠVEJCAR, J. Changes in Microstructure of Air Plasma Sprayed MCrAlY Coatings After Short Thermal Exposure in Argon Atmosphere. ACTA PHYSICA POLONICA A, 2011, vol. 120, no. 2, p. 336-339. ISSN: 0587- 4246.
    Detail

    ČELKO, L.; ŘIČÁNKOVÁ, V.; KLAKURKOVÁ, L.; ZÁBRANSKÝ, K.; ŠVEJCAR, J. Remelting of M- CrAlY Air Plasma Sprayed Coatings by Means of Aluminium Cold Rolling and Conventional Heat Treatment. YUCOMAT 2011. Belgrade, Serbia: IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2011. p. 103-103.
    Detail

    DOLEŽAL, P.; ZAPLETAL, J.; HORYNOVÁ, M.; GEJDOŠ, P.; ČELKO, L. CYCLIC DEFORMATION RESPONSE OF AZ31 MAGNESIUM ALLOY AFTER CORROSION DEGRADATION. Chemické listy, 2011, vol. 105, no. S, p. 787-789. ISSN: 0009- 2770.
    Detail

  • 2010

    ŘIČÁNKOVÁ, V.; ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Vliv krátkodobé tepelné expozice na mikrostrukturu plazmou nanášených MCrAlY povlaků. In Víceúrovňový desig pokrokových materiálů 2010. 1. Brno: ÚFM AVČR, 2010. p. 77-84. ISBN: 978-80-87434-02- 4.
    Detail

    KLAKURKOVÁ, L.; ČELKO, L.; PETRENEC, M.; ŠVEJCAR, J. Structural Characterisation of Particles Created in Al- Ni Composites at Moderate Temperatueres. Acta metalurgica slovaca, 2010, vol. 2010, no. 1, p. 526-529. ISSN: 1338- 1660.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MAN, O.; ŠVEJCAR, J. Atlas of Materials Structures -. Acta metalurgica slovaca, 2010, vol. 2010, no. 1, p. 123-128. ISSN: 1338- 1660.
    Detail | WWW

    ČELKO, L.; ŘIČÁNKOVÁ, V.; KLAKURKOVÁ, L.; DVOŘÁČEK, E.; PODRÁBSKÝ, T.; ŠVEJCAR, J. Changes in Microstructure of Air Plasma Sprayed MCrAlY Coatings After Short Thermal Exposure in Argon Atmosphere. YUCOMAT 2010. Belgrade, Serbia: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2010. p. 20-20. ISBN: 978-86-80321-25- 7.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Stability of Aluminide Diffusion Coatings Expodes to High Temperature. Materials structure - Micromechanics of fracture, Abstract booklet. Antonínská 1, 601 90 Brno, Czech Republic: VUTIUM Brno, 2010. p. 78-78. ISBN: 978-80-214-4112- 5.
    Detail

    KLAKURKOVÁ, L.; ČELKO, L.; ŠVEJCAR, J. Processing of Aluminium - based In- situ Composites Using HVOF Sprayed Nickel Coating. YUCOMAT 2010. Belgrade, Serbia: IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2010. p. 157-157. ISBN: 978-86-80321-25- 7.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MAN, O.; ŠVEJCAR, J. Atlas of Materials Structures - An Useful Apllication for Students in the Field of Materials Sciences and Engineering. YUCOMAT 2010. Belgrade, Serbia: IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2010. p. 162-162. ISBN: 978-86-80321-25- 7.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Diffusion in Al-Ni and Al- NiCr Interfaces at Moderate Temperatures. Defect and Diffusion Forum, 2010, vol. 297- 301, no. 2010, p. 771-777. ISSN: 1012- 0386.
    Detail | WWW

  • 2009

    ČELKO, L. Tvorba ochranných difuzních vrstev na slitině Inconel 713LC. FSI Junior konference 2008, Prezentace vědeckovýzkumných prací doktorandů. Brno: VUT v Brně, FSI, 2009. p. 70-77. ISBN: 978-80-214-3834- 7.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; PETRENEC, M.; ŠVEJCAR, J. Vznik kompozitu na bázi Al- Ni žíháním pod teplotou tavení Al. In Víceúrovňový design pokrokových materiálů 2009. 2009. Brno: ÚFM AVČR, Brno, 2009. p. 149-156. ISBN: 978-80-254-6070- 2.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Use of Powder Ligquid Method of Aluminide Diffusion Coatings Formation on Inconel 713 LC Nickel- Based Superalloy. Materials and Manufacturing Processes, 2009, vol. 24, no. 10- 11, p. 1155-1161. ISSN: 1042- 6914.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; MAN, O.; ŠVEJCAR, J. Use of the powder liquid method for aluminide diffusion coatings formation on inconel 713 LC Ni- based superalloy. Materials and Manufacturing Processes, 2009, vol. 24, no. 2009, p. 1155-1161. ISSN: 1042-6914.
    Detail | WWW

    ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Diffusion in Al-Ni and Al- NiCr Interfaces at Moderated Temperatures. DSL 2009 - Abstract Book. Rome, Italy: Ironix conferences management, 2009. p. 45-45.
    Detail

    ČELKO, L. Interakce několika prvků při difuzi do povrchu kovových matriálů. Brno: VUT v Brně, FSI, 2009. p. 1-28.
    Detail

    KLAKURKOVÁ, L.; ČELKO, L.; ŠVEJCAR, J.; PETRENEC, M.; ROUPCOVÁ, P. Structural Characterisation of Aluminium - Nickel Composities. YUCOMAT 2009. Belgrade, Serbia: IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2009. p. 67-67.
    Detail

  • 2008

    MAN, O.; KLAKURKOVÁ, L.; ČELKO, L.; DOLEŽAL, P. Rozbor vad chromování otopného tělesa. In Přínos metalografie pro řešení výrobních problémů. Praha: ČVUT v Praze, Fakulta strojní a Škoda výzkum, s.r.o., 2008. p. 88-91. ISBN: 978-80-01-04039- 3.
    Detail

    KLAKURKOVÁ, L.; PTÁČKOVÁ, M.; ČELKO, L.; MAN, O. Posouzení příčin poškození tlakové láhve. In Přínos metalografie pro řešení výrobních problémů. Praha: ČVUT v Praze, Fakulta strojní a Škoda výzkum, s.r.o., 2008. p. 333-336. ISBN: 978-80-01-04039- 3.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; DOLEŽAL, P.; MAN, O. Analýza poškozeného ventilátoru. In Přínos metalografie pro řešení výrobních problémů. Praha: ČVUT v Praze, Fakulta strojní a Škoda výzkum, s.r.o., 2008. p. 349-352. ISBN: 978-80-01-04039- 3.
    Detail

    NĚMCOVÁ, A.; DOLEŽAL, P.; ČELKO, L.; KLAKURKOVÁ, L. Příprava Al difuzních vrstev na oceli. In Vrstvy a povlaky 2008. 2008. p. 123-128. ISBN: 978-80-969310-7- 1.
    Detail

    DOLEŽAL, P.; ČELKO, L.; NĚMCOVÁ, A.; KLAKURKOVÁ, L.; POSPÍŠILOVÁ, S. Příprava alitosilitovaných povrchových vrstev na ložiskové oceli. In 17. mezinárodní konference metalurgie a materiálů METAL 2008. Ostrava: Tanger, spol. s r. o., 2008. p. 155-160. ISBN: 978-80-254-1987- 8.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Use of the powder liquid method for aluminide diffusion coatings formation on inconel 713 LC Ni- based superalloy. YUCOMAT 2009. Belgrade, Serbia: IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2008. p. 33-33.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Tvorba ochranných difuzních vrstev na slitině Inconel 713LC. In Víceúrovňový design pokrokových materiálů 2008 sborník doktorské konference. Brno: ÚFM AVČR Brno, 2008. p. 111-118. ISBN: 978-80-254-3492- 5.
    Detail

    KLAKURKOVÁ, L.; ČELKO, L.; DOLEŽAL, P.; MAN, O.; NĚMEC, K. Elements interaction analyses during preparation of Al- Al3Ni eutectic composites. Chemické listy (S), 2008, vol. 102, no. S, p. 884-885. ISSN: 1803- 2389.
    Detail

    DOLEŽAL, P.; ČELKO, L.; NĚMCOVÁ, A.; KLAKURKOVÁ, L. Chemical analysis of Al and Si surface layers on steels. Chemické listy (S), 2008, vol. 102, no. S, p. 871-873. ISSN: 1803- 2389.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L. Effect of heat treatment on the Al+Si Diffusion coatings on Ni - based alloys. Chemické listy, 2008, vol. 102, no. S, p. 869-870. ISSN: 0009- 2770.
    Detail

    DOLEŽAL, P.; NĚMCOVÁ, A.; ČELKO, L.; KLAKURKOVÁ, L. Analýza intermetalických vrstev na bázi Al. In Vrstvy a povlaky 2008. 2008. p. 21-26. ISBN: 978-80-969310-7- 1.
    Detail

  • 2007

    ČELKO, L. Alitosilitace niklu a slitin na bázi niklu. FSI junior konference 2006 Soutěžní poslerová prezentace vědeckovýzkumných prací doktorandů. 1. Brno: FSI VUT v Brně, 2007. p. 37-46. ISBN: 978-80-214-3364- 9.
    Detail

    ČELKO, L.; KLAKURKOVÁ, L.; PROCHÁZKA, T. Vliv chemického složení substrátu na výrobu AlSi difuzních vrstev. In Víceúrovňový design pokrokových materiálů Sborník doktorské konference 2007. 1. Ústav fyziky materiálů AVČR, Žižkova 22, 616 62 Brno: 2007. p. 77-82. ISBN: 978-80-254-0793- 6.
    Detail

  • 2006

    POSPÍŠILOVÁ, S.; PODRÁBSKÝ, T.; JANOVÁ, D.; ČELKO, L. Vliv alitosilitace na strukturu a vlastnosti litých niklových superslitin. In Metal 2006. 15. Tanger, spol. s r.o. Keltičkova 62, 710 10 Ostava 10: Tanger, spol. s r.o. Ostrava, 2006. p. 1-7. ISBN: 80-86840-18- 2.
    Detail

    POSPÍŠILOVÁ, S.; KREJČÍ, J.; PODRÁBSKÝ, T.; ČELKO, L. Protective layers on Ni-based superalloys formed by co- deposition of Al and Si. Microscience 2006. 2006. RMS Royal Microscopical Society, 37/38 St.Clements, Oxford OX4 IAJ, UK: RMS Royal Microscopical Society, 2006. p. 47-47.
    Detail

    ČELKO, L.; BÁRTEK, P.; POSPÍŠILOVÁ, S.; PODRÁBSKÝ, T. Hodnocení alitosilitovaných vrstev na slitině inconel 713 lc po tepelné expozici metodou obrazové analýzy. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2006, vol. 21, no. 1, p. 127-130. ISSN: 1429- 6065.
    Detail

    ČELKO, L.; POSPÍŠILOVÁ, S.; JULIŠ, M.; TOMANEC, O.; PODRÁBSKÝ, T. Comparison of INCONEL 713 LC surface measurements by AFM and Confocal microscopy after low cyclic fatigue test. In Microscience 2006. 2006. RMS Royal Microscopical Society, 37/38 St.Clements, Oxford OX4 IAJ, UK: RMS Royal Microscopical Society, 2006. p. 54-54.
    Detail

  • 2005

    HUTAŘOVÁ, S.; JULIŠ, M.; PODRÁBSKÝ, T.; KREJČÍ, J.; ČELKO, L. Influence of Surface Layers on Structure Stability and Product Qualities of Nickel- Base Superalloys. In Juniormat 05. Praha: CSNMT, 2005. p. 271-274. ISBN: 80-214-2984- 4.
    Detail

    POSPÍŠILOVÁ, S., ČELKO, L., JULIŠ, M., PODRÁBSKÝ, T. Degradace struktury alitosilitovaných vrstev slitin na bázi niklu. Materiálové inžinierstvo, 2005, vol. 7, no. 3, p. 84 ( p.)ISSN: 1335- 0803.
    Detail

    POSPÍŠILOVÁ, S., PODRÁBSKÝ, T., KREJČÍ, J., JULIŠ, M., ČELKO, L. Vliv alitosilitované vrstvy na strukturní stabilitu slitin na bázi niklu. In Víceúrovňový design pokrokových materiálů. Brno: ÚFM AVČR Brno, 2005. p. 139 ( p.)ISBN: 80-239-6145- 4.
    Detail

    POSPÍŠILOVÁ, S., PODRÁBSKÝ, T., KREJČÍ, J., JULIŠ, M., ČELKO, L. Vliv povchových vrstev na strukturní stabilitu a užitné vlastnosti slitin na bázi niklu. In SEMDOK 2005. Žilina Slovensko: EDIS - Editing Centre ŽU, 2005. p. 59-63. ISBN: 80-8070-344- 2.
    Detail

*) Publications are generated once a 24 hours.