Přístupnostní navigace
E-application
Search Search Close
Ing.
Ph.D.
FEEC – Vice-Dean for Internationalization
+420 54114 6433klusacek@vut.cz
Send BUT message
2024
KLUSÁČEK, S.; FIALKA, J.; HAVRÁNEK, Z.; SKALSKÝ, M.; PIKULA, S.; ŠEDIVÁ, S.; BENEŠ, P. Analyzing the impact of mechanical damage in the piezoelectric ceramics elements of knock sensors on the frequency characteristic. In Proceedings of the 30th International Congress on Sound and Vibration. Amsterodam: The International Institute of Acoustics and Vibration, 2024. p. 1-8. ISBN: 978-90-90-39058-1.Detail | WWW
2023
KLUSÁČEK, S.; FIALKA, J.; MANCL, V.; ŠEDIVÁ, S.; KREJČÍ, J.; BENEŠ, P. Comparing Precise Impedance Analyzers to Determine the Coefficients of PZT Ceramics via the Frequency Method. In Proceedings of the 29th International Congress on Sound and Vibration. 1. Praha: IIAV CZECH s.r.o., 2023. p. 1-8. ISBN: 978-80-11-03423-8.Detail | Full text in the Digital Library
KLUSÁČEK, S.; FIALKA, J.; HAVRÁNEK, Z.; SKALSKÝ, M.; BENEŠ, P. Comparing the Measurement Methods for Testing the Piezoelectric Ring Element in a Knock Sensor. In Proceedings of the 29th International Congress on Sound and Vibration. 1. Praha: IIAV CZECH s.r.o., 2023. p. 1-8. ISBN: 978-80-11-03423-8.Detail | Full text in the Digital Library
2022
KLUSÁČEK, S.; FIALKA, J.; HAVRÁNEK, Z.; BENEŠ, P. Methods to Measure Thermal Depolarization Effects in Piezoelectric Active Ring Elements for Diagnostic Sensors. In Proceedings of the 28th International Congress on Sound and Vibration. 1. Singapore: Society of Acoustics, 2022. p. 1-8. ISBN: 978-981-18-5070-7.Detail | WWW | Full text in the Digital Library
2021
KUNZ, J.; FIALKA, J.; PIKULA, S.; BENEŠ, P.; KREJČÍ, J.; KLUSÁČEK, S.; HAVRÁNEK, Z. A New Method to Perform Direct Efficiency Measurement and Power Flow Analysis in Vibration Energy Harvesters. SENSORS, 2021, vol. 21, no. 7, p. 1-19. ISSN: 1424-8220.Detail | WWW | Full text in the Digital Library
2018
BENEŠ, P.; KLUSÁČEK, S.; MÁLEK, P.; JÍLEK, T. CALIBRATION METHOD BASED ON NUMERICAL MODEL FOR THE MEMS 3D ACCELEROMETER. In Proceedings of the 25th International Congress on Sound and Vibration. Hiroshima: 2018. p. 150-155. ISBN: 978-83-7880-552-6.Detail | WWW
KLUSÁČEK, S.; HAVRÁNEK, Z.; FIALKA, J.; BENEŠ, P. Comparing digital output MEMS microphones in the high frequency range. In Proceedings of the 25th International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Hirosima, Japan: International Institute of Acoustic and Vibration, 2018. p. 1-6. ISBN: 978-83-7880-552-6. ISSN: 2329-3675.Detail
2016
KLUSÁČEK, S.; HAVRÁNEK, Z.; BENEŠ, P. Srovnání metod pro přesné určení rezonančních frekvencí lopatek turbodmychadla pomocí laserových interferometrů a kalibrace snímačů zrychlení a úhlové rychlosti na FEKT VUT v Brně. Noise and vibration in practice. 21. Bratislava: Slovenská technická univerzita v Bratislavě, 2016. p. 83-88. ISBN: 978-80-227-4563-5.Detail
FIALKA, J.; BENEŠ, P.; MICHLOVSKÁ, L.; KLUSÁČEK, S.; PIKULA, S.; DOHNAL, P.; HAVRÁNEK, Z. Measurement of thermal depolarization effects in piezoelectric coefficients of soft PZT ceramics via the frequency and direct methods. Journal of the European Ceramic Society, 2016, vol. 36, no. 11, p. 2727-2738. ISSN: 0955-2219.Detail | WWW | Full text in the Digital Library
2015
KLUSÁČEK, S.; HAVRÁNEK, Z.; HASÍK, S.; FIALKA, J.; BENEŠ, P. Temperature and Sensitivity Analysis on MEMS Vibration Sensors with Different Principles of Operation. In Proceedings of the 22nd International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Florencie, Itálie: International Institute of Acoustic and Vibration, 2015. p. 1-8. ISBN: 978-88-88942-48- 3. ISSN: 2329- 3675.Detail | WWW
HAVRÁNEK, Z.; BENEŠ, P.; KLUSÁČEK, S. Application of MEMS microphone array for acoustic holography. In Proceedings of Euronoise 2015. Proceedings - European Conference on Noise Control. Maastricht, Belgie: European Acoustics Association, 2015. p. 919-924. ISSN: 2226-5147.Detail
KLUSÁČEK, S.; FIALKA, J.; HAVRÁNEK, Z.; BENEŠ, P. An Analysis of the Parameters of the Active PZT Element of a Knock Sensor. In INTER- NOISE 2015 Proceedings on USB. Proceedings - National Conference on Noise Control Engineering. San Francisco, USA: Institute of Noise Control Engineering, 2015. p. 1-7. ISSN: 0736- 2935.Detail | WWW
HAVRÁNEK, Z.; FIALKA, J.; BENEŠ, P.; KLUSÁČEK, S. Numerical and experimental determination of impedance characteristics of PZT elements for acoustic emission sensors. In Proceedings of the 22nd International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Florencie, Itálie: International Institute of Acoustic and Vibration, 2015. p. 1-8. ISBN: 978-88-88942-48- 3. ISSN: 2329- 3675.Detail
2014
KLUSÁČEK, S.; FIALKA, J.; BENEŠ, P.; HAVRÁNEK, Z.; PIKULA, S. Measurement of Temperature Dependence in the Piezoelectric Active Element of a Knock Sensor. In Proceedings of 43rd International Congress on Noise Control Engineering. Melbourne, Victoria, Austrálie: The Australian Acoustical Society, 2014. p. 1-7. ISBN: 978-0-909882-04- 4.Detail
HAVRÁNEK, Z.; BENEŠ, P.; KLUSÁČEK, S. Free- field calibration of MEMS microphone array used for acoustic holography. In Proceedings of the 21st International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Peking, Čína: 2014. p. 1-8. ISBN: 978-83-62652-66- 2. ISSN: 2329-3675.Detail
KLUSÁČEK, S.; FIALKA, J.; HAVRÁNEK, Z.; BENEŠ, P. An Experimental Comparison of Laser Interferometer Methods for Accurate Determination of Resonant Frequencies in a Turbine Wheel Assembly. In Proceedings of the 21st International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. Peking: International Institute of Acoustic and Vibration, 2014. p. 1-8. ISBN: 978-83-62652-66-2. ISSN: 2329-3675.Detail
HAVRÁNEK, Z.; BENEŠ, P.; KLUSÁČEK, S. Comparison of patch acoustic holography methods for confined space. In Proceedings of 43rd International Congress on Noise Control Engineering. Melbourne, Victoria, Austrálie: The Australian Acoustical Society, 2014. p. 1-10. ISBN: 978-0-909882-04- 4.Detail
2013
KLUSÁČEK, S.; FIALKA, J.; BENEŠ, P.; HAVRÁNEK, Z. An Experimental Study of Temperature Effect on Material Parameters of PZT Ceramic Ring Used in Knock Sensors. In Proceedings of the 2013 Seventh International Conference on Sensing Technology. 1. Wellington, New Zealand: Massey University, 2013. p. 874-879. ISBN: 978-1-4673-5221-5.Detail
FIALKA, J.; BENEŠ, P.; PIKULA, S.; KLUSÁČEK, S. Measurement of Temperature Dependence in Material Coefficients of PZT Ceramics for Acoustic Emission Sensors. In 2013 IUS Proceedings. 1. IEEE Ultrasonics, Ferroelectrics, Frequency Control Society and European Frequency and Time Forum, 2013. p. 1109-1112. ISBN: 978-1-4673-5686-2.Detail
KLUSÁČEK, S.; FIALKA, J.; HAVRÁNEK, Z.; BENEŠ, P. Experimental methods for testing active element of piezoelectric knock sensor by using temperature dependences. In Proceedings of the 20th International Congress on Sound and Vibration. International Journal of Acoustic and Vibration. USA: International Institute of Acoustic and Vibration, 2013. p. 1-7. ISBN: 978-616-551-682- 2. ISSN: 2329- 3675.Detail
2012
KLUSÁČEK, S.; HAVRÁNEK, Z.; BENEŠ, P. Primární a sekundární kalibrace snímačů vibrací na FEKT VUT v Brně. In Sborník příspěvků Setkání uživatelů PULSE 2012. Praha: Spectris Praha spol. s r.o., 2012. p. 1-6. ISBN: 978-80-904648-2- 7.Detail
KLUSÁČEK, S. Metody bezdemontážní diagnostiky. Brno: VUT Brno, 2012. p. 1-113. Detail
HAVRÁNEK, Z.; KLUSÁČEK, S. Experimental evaluation of methods for estimation of regularization in acoustic holography with MEMS sensor array. In INTER- NOISE 2012 Proceedings on DVD. Proceedings - National Conference on Noise Control Engineering. New York: Institute of Noise Control Engineering, 2012. p. 1-11. ISBN: 978-1-62748-560- 9. ISSN: 0736- 2935.Detail
HAVRÁNEK, Z.; KLUSÁČEK, S. Diagnostika hluku a vibrací ventilátoru silničního tunelu. In Sborník příspěvků Workshopu Perspektivní projekty vývoje řídicích a senzorických technologií 2012. Brno: Litera Brno, 2012. p. 1-10. ISBN: 978-80-214-4527- 7.Detail
HAVRÁNEK, Z.; KLUSÁČEK, S. Analýza vibrací ventilátoru silničního tunelu. In Sborník příspěvků Setkání uživatelů PULSE 2012. Praha: Spectris Praha spol. s r.o., 2012. p. 1-10. ISBN: 978-80-904648-2- 7.Detail
KLUSÁČEK, S.; HAVRÁNEK, Z. Experimental diagnostic methods for vibration piezoelectric sensors. In INTER- NOISE 2012 Proceedings on DVD. Proceedings - National Conference on Noise Control Engineering. New York: Institute of Noise Control Engineering, 2012. p. 1-10. ISBN: 978-1-62748-560- 9. ISSN: 0736- 2935.Detail
2011
HAVRÁNEK, Z.; KLUSÁČEK, S.; BENEŠ, P.; VÁGNER, M. Allan variance analysis on MEMS tilt sensors with different principles of operation. In 2011 IEEE SENSORS Proceedings. Limerick, Ireland: IEEE, 2011. p. 1685-1688. ISBN: 978-1-4244-9288-6.Detail
2008
HAVRÁNEK, Z.; KLUSÁČEK, S. Localization of sound sources in large scale based on multiple patch measurement. In Internoise2008 Proceedings on CD- ROM. Proceedings - National Conference on Noise Control Engineering. 1. Shanghai, Čína: i- ince, 2008. p. 1-11. ISBN: 978-1-60560-989- 8. ISSN: 0736- 2935.Detail
KLUSÁČEK, S.; HAVRÁNEK, Z. Diagnostic methods for operation of piezoceramics in vibration sensors. In Internoise2008 Proceedings on CD- ROM. Proceedings - National Conference on Noise Control Engineering. 1. Shanghai, Čína: Internoise- 2008, 2008. p. 1-8. ISBN: 978-1-60560-989- 8. ISSN: 0736- 2935.Detail
2007
KLUSÁČEK, S. Závěrečná zpráva grantu FRVŠ č. 3178/2006: Rozvoj laboratorní výuky předmětu Senzory neelektrických veličin. 1. 2007. p. 1-28. Detail
HAVRÁNEK, Z.; KLUSÁČEK, S. Identification of regularization parameter for NAH by comparison of results of different NAH calculation methods. In INTER-NOISE 2007 Proceedings on CD- ROM. Proceedings - National Conference on Noise Control Engineering. Istanbul: Turkish Acoustical Society, 2007. p. 1-9. ISBN: 978-1-60560-385- 8. ISSN: 0736- 2935.Detail
2006
Stanislav Klusacek, Petr Benes. Measurement of Irregularity of Particle Size Distribution. In Modern trends in Control. Košice: Equilibria, s.r.o., 2006. p. 151-161. ISBN: 80-969224-6- 7.Detail
BENEŠ, P.; KLUSÁČEK, S. ONLINE MEASUREMENT OF THE PARTICLE SIZE DISTRIBUTION. In Proceedings of IMEKO XVII World Congress. Rio de Janeiro: International Measurement Confederation - IMEKO, 2006. p. 1-6. Detail
Ing. Stanislav Klusáček, Ing. Zdeněk Havránek. Použití multianalyzátoru PULSE ve výuce ÚAMT. In 4. setkání uživatelů PULSE. Praha: Spectris Praha spol. s r.o., 2006. p. 1-12. ISBN: 80-239-7070- 4.Detail
2005
ŽALUD, L., DVORSKÁ, J., KLUSÁČEK, S., NEUŽIL, T., VAŠINA, M. Visual Telepesence Operator Test in Mobile Robot Testing Area. In Sbornik prispevku konference Vršov 2005. Brno: VUT Brno, 2005. p. 45-49. ISBN: 80-214-3008- 7.Detail
Stanislav Klusáček. NEW TRENDS IN DESIGN AND CALIBRATION OF ACCELEROMETERS. In Proceedings of Spring School - Engineering for the Future. Kielce: Kielce University of Technology, 2005. p. 1-6. ISBN: 83-88906-26- 7.Detail
Ludvík Bejček, Stanislav Klusáček. Measuring mechanical properties of agricultural products by frequency analysis. In In TEST 2005 Proceedings. Nürnberg: AMA Service GmbH, 2005. p. 1-4. Detail
2004
BENEŠ, P.; KLUSÁČEK, S. In Process Measurement of Particle Size Distribution. In Proceedings of IEEE Sensors 2004. Vienna: IEEE Computer Society, 2004. p. 357-361. ISBN: 0-7803-8693- 0.Detail
ŠEDIVÁ, S., KLUSÁČEK, S. Využití systému OMS v laboratorní výuce. In Proceedings the 6th International Scientific - Technical Conference Process Control 2004. Pardubice: University of Pardubice, 2004. p. 274 ( p.)ISBN: 80-7194-662- 1.Detail
KLUSÁČEK, S. Vývoj senzoru pro diagnostiku a řízení motoru automobilu. In Process Control 2004. Pardubice: Univerzita Pardubice, 2004. p. 281-285. ISBN: 80-7194-662- 1.Detail
KLUSÁČEK, S. Calibration of Knock Sensor. In Proceedings of the 10th Conference Student EEICT 2004. Brno: Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2004. p. 381-385. ISBN: 80-214-2636- 5.Detail
KLUSÁČEK, S. Calibration techniques of knock sensors. In 4th International Conference Advanced Engineering Design AED 2004. Glasgow, UK: University of Glasgow, 2004. p. 1-4. ISBN: 80-86059-41- 3.Detail
2003
KLUSÁČEK, S., GRATZ, P., BEJČEK, L. Testování biologických produktů pomocí multianalyzátoru PULSE. In Testování biologických produktů pomocí multianalyzátoru PULSE. Spectris Praha spol. s r.o., 2003. p. 1-20. Detail
KLUSÁČEK, S. Návrh a kalibrace senzoru klepání. In Sborník příspěvků studentské konference RADEŠÍN 2003. Brno: Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2003. p. 26-28. ISBN: 80-214-2479- 6.Detail
BEJČEK, L.; GRÄTZ, P.; KLUSÁČEK, S. Biological product testing using mechanical response. In TEST 2003 Proceedings. Wunstorf, SRN: AMA Service GmbH, 2003. p. 203-208. Detail
KLUSÁČEK, S., GRATZ, P. Vibration Techniques for Biological Product Testing. In Student EEICT 2003. Brno: VUT Brno, 2003. p. 1-6. Detail
GOLIÁŠ, J., BEJČEK, L., GRATZ, P., KLUSÁČEK, S. Mechanical Resonance Method for Evaluation of Firmness of Peach Fruit. Horticultural Science, 2003, vol. 30, no. 1, p. 1 ( p.)ISSN: 0862-867X.Detail
2002
GRATZ, P., GOLIÁŠ, J., BEJČEK, L., KLUSÁČEK, S. Mechanical Resonance Method for Evaluation of Firmness of Peach Fruit. In Modern Analytical Methods for Food and Beverage Authentication. Lednice: MZLU Brno, Lednice, 2002. p. 90 ( p.)Detail
GRATZ, P., BEJČEK, L., KLUSÁČEK, S. Measuring mechanical properties of fruit by frequency response. In Eurosensors XVI. Praha: CVUT Praha, 2002. p. 113 ( p.)ISBN: 80-01-02576- 4.Detail
*) Publications are generated once a 24 hours.