prof. Ing.

Václav Píštěk

DrSc.

FME, IAE DP – Professor

+420 54114 2271
pistek.v@fme.vutbr.cz

Send BUT message

prof. Ing. Václav Píštěk, DrSc.

Publications

  • 2024

    SAGIN, S.; SAGIN, S.; FOMIN, O.; GAICHENIA, O.; ZABLOTSKYI, Y.; PÍŠTĚK, V.; KUČERA, P. Use of biofuels in marine diesel engines for sustainable and safe maritime transport. RENEWABLE ENERGY, 2024, vol. 224, no. 120221, p. 1-12. ISSN: 1879-0682.
    Detail | WWW

  • 2023

    AL-QURAAN, T.; ALFAQS, F.; ALREFO, I.; VOJTOV, V.; VOITOV, A.; KRAVTSOV, A.; MIROSHNYK, O.; KONDRATIEV, A.; KUČERA, P.; PÍŠTĚK, V. Methodological Approach in the Simulation of the Robustness Boundaries of Tribosystems under the Conditions of Boundary Lubrication. Lubricants, 2023, vol. 11, no. 1, p. 1-17. ISSN: 2075-4442.
    Detail | WWW | Full text in the Digital Library

    FOMIN, O.; PROKOPENKO, P.; KARA, S.; PÍŠTĚK, V.; KUČERA, P. Study of the basic criteria of the pantograph and overhead line interaction in operating conditions. Results in Engineering, 2023, vol. 19, no. 1, p. 1-8. ISSN: 2590-1230.
    Detail | WWW | Full text in the Digital Library

    SAGIN, S.; KARIANSKYI, S.; SAGIN, S.; VOLKOV, O.; ZABLOTSKYI, Y.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P. Ensuring the safety of maritime transportation of drilling fluids by platform supply-class vessel. APPLIED OCEAN RESEARCH, 2023, vol. 140, no. 103745, p. 1-11. ISSN: 1879-1549.
    Detail | WWW

    KONDRATIEV, A.; PÍŠTĚK, V.; GAJDACHUK, V.; KHARCHENKO, M.; NABOKINA, T.; KUČERA, P.; KUČERA, O. Effect of Ply Orientation on the Mechanical Performance of Carbon Fibre Honeycomb Cores. Polymers, 2023, vol. 15, no. 11, p. 1-17. ISSN: 2073-4360.
    Detail | WWW | Full text in the Digital Library

    AL-RAWASHDEH, A.; YOUNES, T.; DALABEEH, A.; AL_ISSA, H.; QAWAQZEH, M.; MIROSHNYK, O.; KONDRATIEV, A.; KUČERA, P.; PÍŠTĚK, V.; STEPENKO, S. Experimental Investigation of Microcontroller-Based Acoustic Temperature Transducer Systems. SENSORS, 2023, vol. 23, no. 2, p. 1-15. ISSN: 1424-8220.
    Detail | WWW | Full text in the Digital Library

    KUČERA, P.; KONDRATIEV, A.; PÍŠTĚK, V.; TARANENKO, I.; NABOKINA, T.; KAPLAN, Z. Thin-walled open-profile composite beams under thermo-mechanical loading. COMPOSITE STRUCTURES, 2023, vol. 312, no. 116844, p. 1-14. ISSN: 1879-1085.
    Detail | WWW

  • 2022

    SAGIN, S.; KUROPYATNYK, O.; SAGIN, A.; TKACHENKO, I.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P. Ensuring the Environmental Friendliness of Drillships during Their Operation in Special Ecological Regions of Northern Europe. Journal of Marine Science and Engineering, 2022, vol. 10, no. 9, p. 1-25. ISSN: 2077-1312.
    Detail | WWW

    KONDRATIEV, A.; PÍŠTĚK, V.; VAMBOL, O.; KUČERA, P. Effect of Heating Conditions during Moulding on Residual Stress–Strain Behaviour of a Composite Panel. Polymers, 2022, vol. 14, no. 9, p. 1-14. ISSN: 2073-4360.
    Detail | WWW | Full text in the Digital Library

    KONDRATIEV, A.; PÍŠTĚK, V.; VAMBOL, O.; OTROSH, Y.; KUČERA, P.; KUČERA, O. Determination of the Composite Panel Moulding Pressure Value. Polymers, 2022, vol. 14, no. 12, p. 1-17. ISSN: 2073-4360.
    Detail | WWW | Full text in the Digital Library

    MINCHEV, D.; GOGORENKO, O.; VARBANETS, R.; MOSHENTSEV, Y.; PÍŠTĚK, V.; KUČERA, P.; SHUMYLO, O.; KYRNATS, V. Prediction of centrifugal compressor instabilities for internal combustion engines operating cycle simulation. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2022, vol. 0, no. 0, p. 1-13. ISSN: 0954-4070.
    Detail | WWW

    RYMAR, T.; TATARCHENKO, H.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P.; BERAN, M.; BURLUTSKYY, O. The Study of Manufacturing Thermal Insulation Materials Based on Inorganic Polymers under Microwave Exposure. Polymers, 2022, vol. 14, no. 15, p. 1-12. ISSN: 2073-4360.
    Detail | WWW | Full text in the Digital Library

    KOCHANOV, V.; PÍŠTĚK, V.; KONDRATIEV, A.; YURESKO, T.; KUČERA, P. Influence of Geometric Parameters of Conical Acrylic Portholes on Their Stress–Strain Behaviour. Polymers, 2022, vol. 14, no. 5, p. 1-15. ISSN: 2073-4360.
    Detail | WWW | Full text in the Digital Library

  • 2021

    SULYM, A.; KHOZIA, P.; TRETIAK, E.; PÍŠTĚK, V.; FOMIN, O.; KUČERA, P. Aspects of Strength Testing of Tank Containers in Compliance with the Requirements of the UN Navigation Rules and Regulations. Journal of Marine Science and Engineering, 2021, vol. 9, no. 3, p. 1-18. ISSN: 2077-1312.
    Detail | WWW | Full text in the Digital Library

    KONDRATIEV, A.; PÍŠTĚK, V.; SMOVZIUK, L.; SHEVTSOVA, M.; FOMINA, A.; KUČERA, P. Stress–Strain Behaviour of Reparable Composite Panel with Step-Variable Thickness. Polymers, 2021, vol. 13, no. 21, p. 1-23. ISSN: 2073-4360.
    Detail | WWW | Full text in the Digital Library

    FOMIN, O.; VATULIA, G.; GORBUNOV, M.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Determination of residual resource of flat wagons load-bearing structures with a 25-year service life. In IOP Conference Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering. 2021. p. 1-9. ISSN: 1757-8981.
    Detail | WWW

    KONDRATIEV, A.; PÍŠTĚK, V.; SMOVZIUK, L.; SHEVTSOVA, M.; FOMINA, A.; KUČERA, P.; PROKOP, A. Effects of the Temperature–Time Regime of Curing of Composite Patch on Repair Process Efficiency. Polymers, 2021, vol. 13, no. 24, p. 1-20. ISSN: 2073-4360.
    Detail | WWW | Full text in the Digital Library

    KONDRATIEV, A.; PÍŠTĚK, V.; PURHINA, S.; SHEVTSOVA, M.; FOMINA, A.; KUČERA, P. Self-Heating Mould for Composite Manufacturing. Polymers, 2021, vol. 13, no. 18, p. 1-18. ISSN: 2073-4360.
    Detail | WWW | Full text in the Digital Library

    FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Determination of the Vertical Load on the Carrying Structure of a Flat Wagon with the 18–100 and Y25 Bogies. Applied Sciences - Basel, 2021, vol. 11, no. 9, p. 1-14. ISSN: 2076-3417.
    Detail | WWW | Full text in the Digital Library

    VARBANETS, R.; FOMIN, O.; PÍŠTĚK, V.; KLYMENKO, V.; MINCHEV, D.; KHRULEV, A.; ZALOZH, V.; KUČERA, P. Acoustic Method for Estimation of Marine Low-Speed Engine Turbocharger Parameters. Journal of Marine Science and Engineering, 2021, vol. 9, no. 3, p. 1-13. ISSN: 2077-1312.
    Detail | WWW | Full text in the Digital Library

    DRBAL, M.; PÍŠTĚK, V.; KUČERA, P. ROTARY ENGINE FOR SMALL VESSELS. III International Maritime Scientific Conference of the Ship Power Plants and Technical Operation Department of Odessa National Maritime University MPP&O-2021. 2021. p. 222-225.
    Detail

    FOMIN, O.; LOVSKA, A.; KUČERA, P.; PÍŠTĚK, V. Substantiation of Improvements for the Bearing Structure of an Open Car to Provide a Higher Security during Rail/Sea Transportation. Journal of Marine Science and Engineering, 2021, vol. 9, no. 8, p. 1-17. ISSN: 2077-1312.
    Detail | WWW | Full text in the Digital Library

    FOMIN, O.; LOVSKA, A.; IVANCHENKO, D.; ZINCHENKO, S.; PÍŠTĚK, V. STUDY OF LOADING OF THE LOAD-BEARING STRUCTURE OF HOPPER WAGONS ON Y25 BOGIES. Eureka: Physics and Engineering, 2021, vol. 1, no. 2, p. 32-41. ISSN: 2461-4262.
    Detail | WWW

  • 2020

    FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. RESEARCH OF STABILITY OF CONTAINERS IN THE COMBINED TRAINS DURING TRANSPORTATION BY RAILROAD FERRY. MM Science Journal, 2020, no. 1, p. 3728-3733. ISSN: 1805-0476.
    Detail | WWW

    LOVSKA, A.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P. Dynamic Load and Strength Determination of Carrying Structure of Wagons Transported by Ferries. Journal of Marine Science and Engineering, 2020, vol. 8, no. 11, p. 1-14. ISSN: 2077-1312.
    Detail | WWW | Full text in the Digital Library

    LOVSKA, A.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P. The research of the influence of viscous interaction between wagon and container on the dynamic load during transportation by rail ferry. In Vibroengineering Procedia. Vibroengineering Procedia. JVE International, 2020. p. 62-67. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Computational modelling of dynamic loads of a container under viscous interaction with a flat wagon in sea transport. In Vibroengineering Procedia. Vibroengineering Procedia. JVE International, 2020. p. 68-73. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    LOVSKA, A.; FOMIN, O.; PÍŠTĚK, V.; KUČERA, P. Dynamic Load Modelling within Combined Transport Trains during Transportation on a Railway Ferry. Applied Sciences - Basel, 2020, vol. 10, no. 16, p. 1-15. ISSN: 2076-3417.
    Detail | WWW | Full text in the Digital Library

    DRÁPAL, L.; PÍŠTĚK, V.; DLUGOŠ, J.; VOPAŘIL, J. Connection of a Two-cylinder Concept Engine for the Range Extender to the Dynamometer. In KOKA 2020 Proceedings: 51st International Scientific Conference of Czech and Slovak Universities and Institutions Dealing with Motor Vehicles and Internal Combustion Engines Research. Praha: České vysoké učení technické v Praze, 2020. p. 130-136. ISBN: 978-80-01-06744-4.
    Detail

    LOVSKA, A.; FOMIN, O.; KUČERA, P.; PÍŠTĚK, V. Calculation of Loads on Carrying Structures of Articulated Circular-Tube Wagons Equipped with New Draft Gear Concepts. Applied Sciences - Basel, 2020, vol. 10, no. 21, p. 1-11. ISSN: 2076-3417.
    Detail | WWW | Full text in the Digital Library

    PÍŠTĚK, V.; KUČERA, P.; FOMIN, O; LOVSKA, A. Effective Mistuning Identification Method of Integrated Bladed Discs of Marine Engine Turbochargers. Journal of Marine Science and Engineering, 2020, vol. 8, no. 5, p. 1-12. ISSN: 2077-1312.
    Detail | WWW | Full text in the Digital Library

    PÍŠTĚK, V.; KUČERA, P.; FOMIN, O.; LOVSKA, A.; PROKOP, A. Acoustic Identification of Turbocharger Impeller Mistuning—A New Tool for Low Emission Engine Development. Applied Sciences - Basel, 2020, vol. 10, no. 18, p. 1-15. ISSN: 2076-3417.
    Detail | WWW | Full text in the Digital Library

    FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Dynamic load of the carrying structure of an articulated wagon with new draft gear concepts. In Vibroengineering Procedia. Vibroengineering Procedia. JVE International, 2020. p. 84-89. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    ZÁDĚRA, A.; PÍŠTĚK, V.; PERNICA, V.; KAŇA, V.; MYŠKA, M. VÝVOJ KLIKOVÝCH LISŮ NA VÝROBU BRIKET Z DŘEVĚNÝCH PILIN. Brno: 2020. p. 1-27.
    Detail

    FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Strength characteristic determination of a flat wagon carrying structure with a lower centre of gravity. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2020. p. 99-104. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

  • 2019

    PÍŠTĚK, V.; KUČERA, P. Methanol as a fuel variant for tomorrow. ІХ-ої МІЖНАРОДНОЇ НАУКОВО-ПРАКТИЧНОЇ КОНФЕРЕНЦІЇ «ТРАНСПОРТ І ЛОГІСТИКА: ПРОБЛЕМИ ТА РІШЕННЯ». 2019. p. 141-144. ISBN: 978-617-7414-66-6.
    Detail

    FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Strength determination of wagon bearing structures made of round pipes at railroad ferry transportation. In Vibroengineering Procedia. Vibroengineering Procedia. 2019. p. 100-105. ISSN: 2345-0533.
    Detail

    FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Dynamic load computational modelling of containers placed on a flat wagon at railroad ferry transportation. In Vibroengineering Procedia. Vibroengineering Procedia. 2019. p. 118-123. ISSN: 2345-0533.
    Detail

    KUČERA, P.; PÍŠTĚK, V. Computational Model of a Truck Transmission. ІХ-ої МІЖНАРОДНОЇ НАУКОВО-ПРАКТИЧНОЇ КОНФЕРЕНЦІЇ «ТРАНСПОРТ І ЛОГІСТИКА: ПРОБЛЕМИ ТА РІШЕННЯ». 2019. p. 140-140. ISBN: 978-617-7414-66-6.
    Detail

    KUČERA, P.; PÍŠTĚK, V. Prototyping a System for Truck Differential Lock Control. SENSORS, 2019, vol. 19, no. 16, p. 1-18. ISSN: 1424-8220.
    Detail | WWW | Full text in the Digital Library

    KRPALEK, D.; PROKOP, A.; ŘEHÁK, K.; PÍŠTĚK, V. Souhrnná zpráva o postupu prací za rok 2019. 2019. p. 1-21.
    Detail

    KRPALEK, D.; ŘEHÁK, K.; PROKOP, A.; PÍŠTĚK, V. Souhrnná zpráva o postupu prací za rok 2019. 2019. p. 1-19.
    Detail

    FOMIN, O.; LOVSKA, A.; PÍŠTĚK, V.; KUČERA, P. Dynamic load effect on the transportation safety of tank containers as part of combined trains on railway ferries. In Vibroengineering Procedia. Vibroengineering Procedia. 2019. p. 124-129. ISSN: 2345-0533.
    Detail

  • 2018

    PÍŠTĚK, V.; GORBUNOV, M.; KUČERA, P.; NOZHENKO, O. Comparison of torsional vibration dampers in terms of the dissipated power amount. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 68-72. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    GORBUNOV, M.; PÍŠTĚK, V.; KOVTANETS, M.; NOZHENKO, O.; KARA, S.; KUČERA, P. Supplying system abrasive material with automatic dosing control. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 207-214. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    KRPALEK, D.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Souhrnná zpráva o postupu prací za rok 2018. 2018. p. 1-31.
    Detail

    KUČERA, P.; PÍŠTĚK, V.; ŘEHÁK, K.; PROKOP, A. Kinematics of the front axle of All-Terrain Vehicle. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2018. p. 560-563. ISSN: 1822-296X.
    Detail

    KUČERA, P.; PÍŠTĚK, V.; ŘEHÁK, K.; PROKOP, A. Transmission error analysis of the gearbox. In Transport Means 2018 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2018. p. 705-708. ISSN: 1822-296X.
    Detail

    KUČERA, P.; PÍŠTĚK, V. GEOMETRY OF FRONT AXLE OF ALL-TERRAIN VEHICLE WITH ELECTRIC DRIVE. In VІІІ-ї МІЖНАРОДНОЇ НАУКОВО-ПРАКТИЧНОЇ КОНФЕРЕНЦІЇ «ТРАНСПОРТ І ЛОГІСТИКА: ПРОБЛЕМИ ТА РІШЕННЯ». 2018. p. 188-190. ISBN: 978-617-7414-37-6.
    Detail

    KUČERA, P.; PÍŠTĚK, V.; SVÍDA, D.; BERAN, M. COMPUTATIONAL MODEL OF THE AVIATION DIESEL ENGINE FOR HIL TESTING. Perners' Contacts, 2018, vol. XIII, no. 4, p. 4-10. ISSN: 1801-674X.
    Detail | WWW

    KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Transmission error analysis for heavy-duty gearbox. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 113-116. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    DRÁPAL, L.; VOPAŘIL, J.; PÍŠTĚK, V. Crank Train Concept Design and Balancing of an Internal-Combustion Engine for Range Extending of an Electric Vehicle. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. p. 279-283. ISSN: 2345-0533.
    Detail | WWW

    KUČERA, P.; PÍŠTĚK, V. HIL TESTOVÁNÍ MECHTRONICKÉHO SYSTÉMU V LABORATORNÍCH PODMÍNKÁCH. Perners' Contacts, 2018, vol. XIII, no. 1, p. 83-89. ISSN: 1801-674X.
    Detail | WWW

    KUČERA, P.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. MEASUREMENT OF THE POWERTRAIN TORQUE. In Engineering Mechanics 2018. 1. 2018. p. 449-452. ISBN: 978-80-86246-88-8.
    Detail

    KRPALEK, D.; PROKOP, A.; ŘEHÁK, K.; PÍŠTĚK, V. Souhrnná zpráva o postupu prací za rok 2018. 2018. p. 1-29.
    Detail

  • 2017

    PÍŠTĚK, V.; KUČERA, P.; NOZHENKO, O.; KRAVCHENKO, K.; SVÍDA, D. An unconventional rubber torsional vibration damper with two degrees of freedom. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2017. p. 136-141. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    KUČERA, P.; PÍŠTĚK, V. Torsional analysis of the engine computational model. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2017. p. 25-28. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    NOZHENKO, O.; CHERNIAK, G.; PÍŠTĚK, V.; SUSLOV, E.; NOZHENKO, V.; KRAVCHENKO, K..; KUČERA, P.;. Results of the experimental research of dynamic vibration processes of the rail for rolling stocks fault diagnostics. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2017. p. 165-170. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    SUSLOV, E..; NOZHENKO, O.; ANATOLII, M.; PÍŠTĚK, V.; KUČERA, P.;. Using spectral analysis for flat wheel detections. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2017. p. 171-174. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    PORTEŠ, P.; KUČERA, P.; PÍŠTĚK, V.; FOJTÁŠEK, J.; ZHÁŇAL, L. MODERN TOOLS FOR VEHICLE DEVELOPMENT. In Engineering Mechanics 2017. 1. Brno University of Technology, 2017. p. 54-57. ISBN: 978-80-214-5497-2.
    Detail | WWW | Full text in the Digital Library

    PÍŠTĚK, V.; KUČERA, P.; SVÍDA, D.; BERAN, M. A torsional vibration damper based on a serial viscoelastic coupling of its seismic mass. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2017. p. 56-60. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    KRPALEK, D.; PÍŠTĚK, V.; PROKOP, A.; ŘEHÁK, K. Souhrnná zpráva o postupu prací za rok 2017. 2017. p. 1-20.
    Detail

    PÍŠTĚK, V. Schwingungsdämpfung in Verbrennungsmotoren. In Der Verbrennungsmotor - ein Antrieb mit Vergangenheit und Zukunft. 1. Wiesbaden: Springer Vieweg, 2017. p. 491-518. ISBN: 978-3-658-19290-7.
    Detail

    KUČERA, P.; PÍŠTĚK, V. Truck vibrations caused by rotating shaft deflection. Journal of Vibroengineering, 2017, vol. 19, no. 7, p. 5361-5373. ISSN: 1392-8716.
    Detail | WWW | Full text in the Digital Library

    KUČERA, P.; PÍŠTĚK, V. Analyses of truck powertrain torque and vibration. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2017. p. 101-106. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

    KUČERA, P.; PÍŠTĚK, V. Testing of the Mechatronic Robotic System of the Differential Lock Control on a Truck. International Journal of Advanced Robotic Systems, 2017, vol. 14, no. 5, p. 1-7. ISSN: 1729-8814.
    Detail | WWW | Full text in the Digital Library

    KUČERA, P.; PÍŠTĚK, V. VIBRACE HNACÍHO TRAKTU NÁKLADNÍHO VOZIDLA. Perners' Contacts, 2017, vol. XII, no. 1, p. 123-130. ISSN: 1801-674X.
    Detail | WWW

    KUČERA, P.; PÍŠTĚK, V. SHAFT VIBRATION OF THE TRUCK. In Engineering Mechanics 2017. 1. Brno University of Technology, 2017. p. 546-549. ISBN: 978-80-214-5497-2.
    Detail | WWW | Full text in the Digital Library

    KUČERA, P.; PÍŠTĚK, V. Using HIL testing for Differential Lock Control. In Transport Means 2017 Proceedings. Transport Means. 1. Kaunas University of Technology, Kaunas, LITHUANIA: 2017. p. 640-643. ISSN: 1822-296X.
    Detail

    PÍŠTĚK, V.; KLIMEŠ, L.; MAUDER, T.; KUČERA, P. Optimal design of structure in rheological models: an automotive application to dampers with high viscosity silicone fluids. Journal of Vibroengineering, 2017, vol. 19, no. 6, p. 4459-4470. ISSN: 1392-8716.
    Detail | WWW | Full text in the Digital Library

    GORBUNOV, M.; PÍŠTĚK, V.; KOVTANETS, M.; NOZHENKO, O.; KARA, S.; KUČERA, P.;. Research to improve traction and dynamic quality of locomotives. In Vibroengineering PROCEDIA. Vibroengineering Procedia. JVE International, 2017. p. 159-164. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

  • 2016

    PÍŠTĚK, V.; KLIMEŠ, L.; MAUDER, T. Rheological models of high viscosity silicone fluids. In Vibroengineering Procedia. Vibroengineering Procedia. Kaunas, Litva: 2016. p. 25-30. ISSN: 2345-0533.
    Detail

    KUČERA, P.; PÍŠTĚK, V.; PORTEŠ, P. AUTOMATIC DIFFERENTIAL LOCK CONTROL IN A TRUCK – STRAIGHT DRIVE. In Engineering Mechanics 2016. 1. Prague: Institute of Thermomechanics Academy of Sciences of the Czech Republic, 2016. p. 334-337. ISBN: 978-80-87012-59-8.
    Detail | WWW | Full text in the Digital Library

    KUČERA, P.; PÍŠTĚK, V. A Computational Model of ATV Vehicle for Real- Time Simulation. In Engineering Mechanics 2015. Applied Mechanics and Materials. 2016. p. 242-247. ISBN: 978-3-03835-700- 1. ISSN: 1662- 7482.
    Detail

    KUČERA, P.; PÍŠTĚK, V. Automatic and Manual Differential Lock Control in a Truck – Cornering. In 20th International Conference Transport Means 2016 Proceedings Part I. Transport Means. Kaunas University of Technology, Kaunas, LITHUANIA: KAUNAS UNIV TECHNOLOGY PRESS, K DONELAICIO 73, KAUNAS LT 3006, LITHUANIA, 2016. p. 98-101. ISSN: 1822-296X.
    Detail

    KUČERA, P.; PÍŠTĚK, V. Mechatronic System of Automatic and Manual Differential Lock Control - Vehicle Turnig. In Proceedings of the 2016 17th International Conference on Mechatronics – Mechatronika (ME) 2016. 1st edition. Prague: Czech Technical University in Prague, 2016. p. 307-310. ISBN: 978-80-01-05882-4.
    Detail

    KUČERA, P.; PÍŠTĚK, V. A COMPUTATIONAL ENGINE MODEL IN SIMULINK SOFTWARE. In KOKA 2016. Brno: 2016. p. 109-112. ISBN: 978-80-214-5379- 1.
    Detail

    KUČERA, P.; PÍŠTĚK, V.; PORTEŠ, P. AUTOMATICKÉ ŘÍZENÍ UZAVÍRÁNÍ DIFERENCIÁLU NÁKLADNÍHO VOZIDLA PŘI JÍZDĚ PŘÍMÝM SMĚREM. Perners' Contacts, 2016, vol. XI, no. 1, p. 115-121. ISSN: 1801-674X.
    Detail | WWW

    KOTEK, L.; JONÁK, M.; PÍŠTĚK, V.; DRÁPAL, L.; TRÁVNÍČEK, P. Design and verification of a large combustion chamber for testing of fuel injection nozzles. In Transport Means 2016: Proceeding of the 20th International Scientific Conference. Transport Means. Kaunas, Litevská republika: Technologija, 2016. p. 741-744. ISSN: 1822-296X.
    Detail

    PÍŠTĚK, V.; KLIMEŠ, L.; MAUDER, T. Optimal structure design for rheological models of elastomer components. In Proceedings of 20th International Conference Transport Means 2016. Transport Means. Kaunas, Litva: Kaunas University of Technology, 2016. p. 197-202. ISSN: 1822-296X.
    Detail

    KUČERA, P.; PÍŠTĚK, V. Truck vibrations caused by unbalanced rotating shaft. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2016. p. 148-153. ISSN: 2345-0533.
    Detail | WWW | Full text in the Digital Library

  • 2015

    PÍŠTĚK, V.; KLIMEŠ, L.; MAUDER, T. Dynamic models of elastomer parts using mass-spring- damper system. In 19th International conference Transport Means 2015 Proceedings. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2015. p. 63-66. ISSN: 1822-296X.
    Detail

    PÍŠTĚK, V.; SVÍDA, D. Advanced Computational Models of Elastomer Parts in Automotive Technology. Perners' Contacts, 2015, vol. X, no. 2, p. 43-52. ISSN: 1801- 674X.
    Detail

    KUČERA, P.; PÍŠTĚK, V. Longitudinal and lateral dynamics of a commercial vehicle in Simulink software. In Proceeding of International Conference Transport Means 2015. Transport Means. Kaunas Univ Technol, Kaunas, LITHUANIA: KAUNAS UNIV TECHNOLOGY PRESS, K DONELAICIO 73, KAUNAS LT 3006, LITHUANIA, 2015. p. 458-461. ISSN: 1822-296X.
    Detail

    KOTEK, L.; PÍŠTĚK, V.; DRÁPAL, L. Identification of possible causes of faults of fuel injection nozzles. In Transport Means - Proceedings of the International Conference. Transport Means. Kaunas Univ Technol, Kaunas, LITHUANIA: KAUNAS UNIV TECHNOLOGY PRESS, K DONELAICIO 73, KAUNAS LT 3006, LITHUANIA, 2015. p. 253-256. ISBN: 9955-09-935- 6. ISSN: 1822-296X.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V. Dynamic Simulation of Progressive Crank Train. In Advanced Mechatronics Solution. Advances in Intelligent Systems and Computing. 393. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer International Publishing Switzerland, 2015. p. 207-212. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
    Detail

    KUČERA, P.; PÍŠTĚK, V. A Computational Model of ATV Vehicle for Real- time Simulation. In Engineering Mechanics 2015. 1. Prague: Institute of Theoretical and Applied Mechanics, Avademy of Sciences of the Czech Republic, v.v.i, Prague, 2015. p. 172-173. ISBN: 978-80-86246-42- 0.
    Detail

    KUČERA, P.; PÍŠTĚK, V. PODÉLNÁ A PŘÍČNÁ DYNAMIKA NÁKLADNÍHO VOZIDLA S POHONEM 6x6. Perners' Contacts, 2015, vol. X, no. 3, p. 81-86. ISSN: 1801- 674X.
    Detail

  • 2014

    PÍŠTĚK, V.; MAUDER, T.; KLIMEŠ, L. Identification of rheological model parameters by means of nonlinear optimization in GAMS. In Proceedings of 20th International Conference on Soft Computing MENDEL 2014. Brno: Brno University of Technology, 2014. p. 347-352. ISBN: 978-80-214-4984- 8.
    Detail

    PORTEŠ, P.; PÍŠTĚK, V.; FOJTÁŠEK, J.; KUČERA, P. (WP17V003) Virtuální prototyp těžkého nákladního vozu. 2014. p. 1-15.
    Detail

    PÍŠTĚK, V.; MAUDER, T.; KLIMEŠ, L. Nonlinear optimization of generalized Kelvin- model parameters with the use of mathematical programming. In Proceeding of International Conference Transport Means 2014. Transport Means. "Technologija", Studentu St. 54, LT- 51424 Kaunas: Kaunas University of Technology, K. Donelaičio st. 73, LT- 44029 Kaunas, 2014. p. 277-280. ISBN: 9955-09-935- 6. ISSN: 1822-296X.
    Detail

    KOTEK, L.; PÍŠTĚK, V.; JONÁK, M. Bivariate Process Capability Analysis of Fuel Injection Nozzles Production. WSEAS Journal Transactions on Environment and Development, 2014, vol. 2014, no. 10, p. 492-495. ISSN: 1790-5079.
    Detail

    KUČERA, P.; PÍŠTĚK, V. A Computational Model of Powertrain Components in Simulink. In Engineering Mechanics 2014. Engineering mechanics 2014. 1. Brno University of Technology, 2014. p. 344-347. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
    Detail | WWW | Full text in the Digital Library

    KUČERA, P.; PÍŠTĚK, V. SIMULINK BLOCK LIBRARY FOR ASSEMBLING A VEHICLE. Perners' Contacts, 2014, vol. IX, no. 2, p. 38-47. ISSN: 1801- 674X.
    Detail

    KUČERA, P.; PÍŠTĚK, V. Virtual prototype of a heavy duty off-road truck driveline in Simulink software. In Proceeding of International Conference Transport Means 2014. Transport Means. K. Donelaičio st. 73, LT-44029 Kaunas: Kaunas University of Technology, 2014. p. 5-8. ISSN: 1822-296X.
    Detail

    JONÁK, M.; KOTEK, L.; DRÁPAL, L.; PÍŠTĚK, V. Modelling of the fuel flow out of the injection nozzle in the application for increasing the efficiency of the diesel fuel injection process. In Proceeding of International Conference Transport Means 2014. Transport Means. "Technologija", Studentu St. 54, LT- 51424 Kaunas: Kaunas University of Technology, K. Donelaičio st. 73, LT- 44029 Kaunas, 2014. p. 173-176. ISBN: 9955-09-935- 6. ISSN: 1822- 296X.
    Detail

    KOTEK, L.; JONÁK, M.; DRÁPAL, L.; PÍŠTĚK, V. High- speed inspection and visualization of fuel injection in the large combustion chamber. In Proceeding of International Conference Transport Means 2014. Transport Means. Kaunas Univ Technol, Kaunas, LITHUANIA: KAUNAS UNIV TECHNOLOGY PRESS, K DONELAICIO 73, KAUNAS LT 3006, LITHUANIA, 2014. p. 59-62. ISBN: 9955-09-935- 6. ISSN: 1822- 296X.
    Detail

  • 2013

    PÍŠTĚK, V.; NOVOTNÝ, P.; MAUDER, T.; KLIMEŠ, L. Parameter identification of rheological models using optimization algorithms. In Mechatronics 2013: Recent Technological and Scientific Advances. Springer- Verlag, 2013. p. 193-198. ISBN: 978-3-319-02293- 2.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; PÍŠTĚK, V. Methods of Enhancing Mechanical Efficiency of Cranktrain. In Setkání uživatelů MSC.Software s.r.o. 2013. Příkop 4, 602 00, Brno: MSC. Software, 2013. p. 144-156. ISBN: 978-80-260-4173- 3.
    Detail

    KUČERA, P.; PÍŠTĚK, V. VIRTUAL DIESEL ENGINE IN SIMULINK. Perners' Contacts, 2013, vol. VIII, no. 2, p. 95-105. ISSN: 1801- 674X.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P.; DRÁPAL, L.; PÍŠTĚK, V. Mixed Lubrication Simulation of Slide Bearings. In Setkání uživatelů MSC.Software s.r.o. 2013. Brno: MSC. Software, 2013. p. 157-163. ISBN: 978-80-260-4173- 3.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V.; MARŠÁLEK, O. Computational Modelling of a Progressive Cranktrain. In Sborník příspěvků Mezinárodní Masarykovy konference pro doktorandy a mladé vědecké pracovníky 2013. Hradec Králové: MAGNANIMITAS, 2013. p. 3616-3625. ISBN: 978-80-87952-00- 9.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; SVÍDA, D.; DRÁPAL, L. Efficient approach for solution of the mechanical losses of the piston ring pack. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D- JOURNAL OF AUTOMOBILE ENGINEERING, 2013, vol. 2013, no. 224, p. 1377-1388. ISSN: 0954- 4070.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P.; DRÁPAL, L.; PÍŠTĚK, V. Overview of Computational Models Used for Mixed Lubrication. In Mechatronics 2013 - Recent Technological and Scientific Advances. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer- Verlag Berlin Heidelberg, 2013. p. 111-117. ISBN: 978-3-319-02293- 2.
    Detail

    KUČERA, P.; PÍŠTĚK, V. TRANSMISSION COMPUTATIONAL MODEL IN SIMULINK. Perners' Contacts, 2013, vol. VIII, no. 4, p. 37-48. ISSN: 1801- 674X.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; PÍŠTĚK, V. A Conceptual Study of Cranktrain with Low Friction Losses. MECCA - Journal of Middle European Costruction and Design of Cars, 2013, vol. XI, no. 2, p. 6-11. ISSN: 1214- 0821.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; PÍŠTĚK, V. Progressive Cranktrain with Low Friction Losses. In Proceedings of the XLIV. International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines. Brno: Mendelova univerzita v Brně, 2013. p. 174-183. ISBN: 978-80-7375-801- 1.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V.; MARŠÁLEK, O. Advanced Crankshaft for Low Power Losses. In Deterioration, Dependability, Diagnostics. University of Defence. Brno: University of Defence, 2013. p. 229-236. ISBN: 978-80-7231-939- 8.
    Detail

    MARŠÁLEK, O.; NOVOTNÝ, P.; DRÁPAL, L.; RAFFAI, P.; PÍŠTĚK, V. Comprehensive Strategy for Computational Modelling of Mixed Lubrication Regime. In Proceedings of the XLIV. International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines. Brno: Mendelova univerzita v Brně, 2013. p. 51-56. ISBN: 978-80-7375-801- 1.
    Detail

    PÍŠTĚK, V.; PORTEŠ, P.; FOJTÁŠEK, J. Odborná zpráva (WP17V004) - Návrh možných koncepcí „inteligentního diferenciálu“ pro použití v nákladních vozidlech. Brno: 2013. p. 1-11.
    Detail

    RAFFAI, P.; NOVOTNÝ, P.; PÍŠTĚK, V.; MARŠÁLEK, O.; DRÁPAL, L. Piston Rings Dynamics Simulation. In Setkání uživatelů MSC.Software s.r.o. 2013. Příkop 4, 602 00, Brno: MSC. Software, 2013. p. 139-144. ISBN: 978-80-260-4173- 3.
    Detail

  • 2012

    FRYŠČOK, T.; PÍŠTĚK, V. Rotordynamics of Modern Turbocharges. Perners' Contacts, 2012, vol. VII, no. 2, p. 40-50. ISSN: 1801- 674X.
    Detail

    DRÁPAL, L.; PÍŠTĚK, V.; NOVOTNÝ, P.; BERAN, M. Cranktrain Dynamics Simulation. Perners' Contacts, 2012, vol. VII, no. 4, p. 26-34. ISSN: 1801- 674X.
    Detail

  • 2011

    NOVOTNÝ, P.; PÍŠTĚK, V. Virtual Engine - A Tool for a Powertrain Dynamic Solution. STROJNISKI VESTNIK- JOURNAL OF MECHANICAL ENGINEERING, 2011, vol. 2011, no. 57, p. 611-621. ISSN: 0039-2480.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L.; AMBRÓZ, R. Development of Aircraft Diesel Engine for Military Use. Advances in Military Technology, 2011, vol. 2011 (6), no. 1, p. 5-20. ISSN: 1802- 2308.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Simulation of Piston Ring Pack Tribology. 1. 1. Brno: University of Defence, 2011. 249 p. ISBN: 978-80-260-0633- 6.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Modeling of Piston Ring Pack Dynamics. MECCA - Journal of Middle European Costruction and Design of Cars, 2011, vol. 2011, no. 3, p. 12-20. ISSN: 1214- 0821.
    Detail

    DRÁPAL, L.; PÍŠTĚK, V.; NOVOTNÝ, P.; AMBRÓZ, R. Virtual Engine Application For Powertrain Dynamics. Technológ, 2011, vol. 2011, no. 3, p. 45-56. ISSN: 1337- 8996.
    Detail

    DRÁPAL, L.; PÍŠTĚK, V.; NOVOTNÝ, P.; AMBRÓZ, R. Virtual Prototyping as Tool for Powertrain Development. In Mechatronics Recent Technological and Scientific Advances. 1. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer- Verlag Berlin Heidelberg, 2011. p. 3-8. ISBN: 978-3-642-23243- 5.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Dynamic Simulation Of Piston Ring Pack. Technológ, 2011, vol. 2011, no. 3, p. 12-20. ISSN: 1337- 8996.
    Detail

    AMBRÓZ, R.; PÍŠTĚK, V.; NOVOTNÝ, P.; PROKOP, A. Simulation and Experimental Tools For Powertrain Noise Reduction. Technológ, 2011, vol. 2011, no. 3, p. 28-36. ISSN: 1337- 8996.
    Detail

    DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V.; AMBRÓZ, R. Crankshaft Development of a Two-stroke Compression-ignition Engine with Contra- running Pistons. MECCA - Journal of Middle European Costruction and Design of Cars, 2011, vol. IX., no. 1, p. 18-27. ISSN: 1214-0821.
    Detail

  • 2010

    NOVOTNÝ, P.; PÍŠTĚK, V. New efficient methods for powertrain vibration analysis. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D- JOURNAL OF AUTOMOBILE ENGINEERING, 2010, vol. 2010, no. 224, p. 611-629. ISSN: 0954- 4070.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L.; AMBRÓZ, R. Modern computational approaches to powertrain mechanical loss solution. Perners' Contacts, 2010, vol. 2010, no. 4, p. 159-170. ISSN: 1801- 674X.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Computational Tools in 3kW Stirling Engine Development. MECCA - Journal of Middle European Costruction and Design of Cars, 2010, vol. 2010, no. 1, p. 31-36. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; SVÍDA, D. Solution of powertrain friction losses by virtual engine. MECCA - Journal of Middle European Costruction and Design of Cars, 2010, vol. 2010, no. 3, p. 12-20. ISSN: 1214- 0821.
    Detail

  • 2009

    NOVOTNÝ, P.; PÍŠTĚK, V. Virtual Engine - A Tool For Noise And Vibration Solution. MECCA - Journal of Middle European Costruction and Design of Cars, 2009, vol. 2009, no. 1, p. 1-8. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Virtual Prototype of Timing Chain Drive. Engineering Mechanics, 2009, vol. 2008, no. 1, p. 123-130. ISSN: 1802- 1484.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; AMBRÓZ, R. Friction Loss Analysis Of Powertrain Parts. MECCA - Journal of Middle European Costruction and Design of Cars, 2009, vol. 2009, no. 2, p. 1-5. ISSN: 1214- 0821.
    Detail

  • 2008

    NOVOTNÝ, P.; PÍŠTĚK, V. Stirling Engine Development using Virtual Prototypes. Acta Mechanica Slovaca, 2008, vol. 2008, no. 4, p. 108-115. ISSN: 1335- 2393.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Noise and Vibration Reduction - the Cranktrain as a Main Powertrain Module. TRANSACTIONS ON TRANSPORT SCIENCES, 2008, vol. 2008, no. 1, p. 21-28. ISSN: 1802- 971X.
    Detail

  • 2007

    PÍŠTĚK, V.; NOVOTNÝ, P. Multidimensional Simulation of Stirling Engine Regenerator. In SIMULATION MODELLING OF MECHATRONIC SYSTEMS III. Mechatronika. Brno: Brno University of Technology, Faculty on Mechanical Engineering, 2007. p. 205-214. ISBN: 978-80-214-3559- 9.
    Detail

    KAPLAN, Z.; PÍŠTĚK, V.; KOPECKÝ, P. Computational methods applied for designing Stirling engine. Acta Mechanica Slovaca, 2007, vol. 11, no. 4-D/ 2007, p. 319-326. ISSN: 1335- 2393.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. CAE Tools in Powertrain Virtual Design Process. In Automotive - Impulse for Mechanical Engineering. 1. Magdeburg: Otto-Von- Guericke University Magdeburg, 2007. p. 145-152. ISBN: 978-3-929757-12- 5.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Camshaft Vibration Modelling in Multi- Body System. In Zborník. 1. Bratislava: KALSM SjF STU, 2007. p. 25-32. ISBN: 978-80-227-2714- 3.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. CAE Tools in Valvetrain Design. In Nové trendy v konštrukcii a explotacii vozidel. 1. Nitra: Slovenská polnohospodářska univerzita v Nitre, 2007. p. 56-64. ISBN: 978-80-8069-942- 0.
    Detail

    NOVOTNÝ, P.; SVÍDA, D.; PÍŠTĚK, V. Tractor Cabin Acoustic Analysis. In Nové trendy v konštrukci a exploatácii vozidiel "Vozidlá 2007". Nitra: Slovenská polnohospodárska universita v Nitre, 2007. p. 183-190. ISBN: 978-80-8069-942- 0.
    Detail

    SVÍDA, D.; NOVOTNÝ, P.; PÍŠTĚK, V. NVH Analysis of Tractor Cabin. In XXXVIII. medzinárodná vedecká konferencia pracovníkov katedier a pracovísk spalovacích motorov vysokých škol na Slovensku a Čechách. 1. Bratislava: Katedra automobilov, Strojnícka fakulta STU v Bratislave, 2007. p. 231-238. ISBN: 978-80-227-2714- 3.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Non- contact Measurement of Cranktrain Vibrations. In 5. setkání uživatelů PULSE. 1. Praha: Spectris Praha spol. s r.o., 2007. p. 53-57. ISBN: 978-80-239-9240- 3.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; SVÍDA, D. Verification of Valvetrain Multi- Body Computational Model. In 5. setkání uživatelů PULSE. 1. Praha: Spectris Praha spol. s r.o., 2007. p. 58-64. ISBN: 978-80-239-9240- 3.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Heat Transfer in Stirling Engine Cylinders. In 5. setkání uživatelů PULSE. 1. Praha: Spectris Praha spol. s r.o., 2007. p. 69-75. ISBN: 978-80-239-9240- 3.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. CFD Tools in Stirling Engine Virtual Design. In Recent Advances in Mechatronics. Mechatronics. Heidelberg: Springer, 2007. p. 125-132. ISBN: 978-3-540-73955- 5.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Crankshaft Fatigue Life Prediction of Tractor Engine. In FEMFAT User Meeting. 1. Steyr: Magna Steyr, 2007. p. 56-63.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. New Approach to Modelling of interacions between Combustion Engine Parts. In Opotřebení spolehlivost diagnostika 2007. 1. Brno: Universita obrany, 2007. p. 205-211. ISBN: 978-80-7231-294- 8.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Stirling Engine Regenerator Model. In Opotřebení spolehlivost diagnostika 2007. 1. Brno: Universita obrany, 2007. p. 217-223. ISBN: 978-80-7231-294- 8.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Multibody Analysis in Concept Phase of Valvetrain. MECCA - Journal of Middle European Costruction and Design of Cars, 2007, vol. 2007, no. 3, p. 8-13. ISSN: 1214- 0821.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. CAE Tools in Cranktrain Design. MECCA - Journal of Middle European Costruction and Design of Cars, 2007, vol. 2007, no. 1, p. 15-21. ISSN: 1214- 0821.
    Detail

  • 2006

    PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Development Process of Modern Diesel Engines. In Sborník abstraktů XXXVII. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Kostelec nad Černými lesy: Česká zemědělská univerzita v Praze, 2006. p. 39-46. ISBN: 80-213-1510- 5.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Development of Four- cylinder Diesel Engine. In 24th CADFEM Users' Meeting 2006 - International Congress on FEM Technology with 2006 German ANSYS Conference. 1. Marktplatz 2, 85567 Grafing, GERMANY: CADFEM GmbH, 2006. p. 101-122. ISBN: 3-937523-03- 0.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Stirling Engine Development Process - CFD Approach. In Opotřebení spolehlivost diagnostika 2006. 1. Brno: Universita Obrany, 2006. p. 163-168. ISBN: 80-7231-165- 4.
    Detail

    KAPLAN, Z., PÍŠTĚK, V., NOVOTNÝ, P. Stirling Cycle and Renewable Sources of Energy. In Sborník z konference HYDROTURBO 2006. Vyhne, Slovenská republika: 2006. p. 25-34.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V.; STODOLA, J. Virtual Engine - a Tool for Military Truck Reliability Increase. Advances in Military Technology, 2006, vol. 2006, no. 1, p. 49-71. ISSN: 1802- 2308.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. CFD Approach to Stirling Engine Virtual Design Process. In SIMULATION MODELLING OF MECHATRONIC SYSTEMS II. Mechatronika. Brno: Brno University of Technology, Faculty on Mechanical Engineering, 2006. p. 205-214. ISBN: 80-214-3341- 8.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Heat Transfer In Cylinders of External Heat Supply Engines. In Opotřebení spolehlivost diagnostika 2006. 1. Brno: Universita Obrany, 2006. p. 205-210. ISBN: 80-7231-165- 4.
    Detail

  • 2005

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Micro Combined Heat and Power Plant Based on the Stirling Engine. MECCA - Journal of Middle European Costruction and Design of Cars, 2005, vol. 2005, no. 4, p. 8-16. ISSN: 1214- 0821.
    Detail | WWW

    PÍŠTĚK, V.; NOVOTNÝ, P.; KAPLAN, Z.; VLACH, R. Virtual Prototypes of External Heat Supply Engines. In Simulation Modelling of Mechatronic Systems I. Mechatronika. Brno: Faculty of Mechanical Engineering, Brno University of Technology, 2005. p. 197-206. ISBN: 80-214-3144- X.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Structural dynamics of the in-line six- cylinder tractor diesel engine. In Virtual Product Development Conference 2005. Mnichov: MSC.Software GmbH, Munich, Germany, 2005. p. 1-16.
    Detail

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Dynamic Computational Model of Stirling Engine. In Opotřebení, spolehlivost, diagnostika 2005. Brno: Univerzita obrany Brno, 2005. p. 137 ( p.)ISBN: 80-7231-026- 7.
    Detail

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Stirling Engine for Combined Production of Electricity and Heat. In 8th International Conference: Traffic and Technologies for Suistanable Development. Karlovy Vary: Společnost pro trvale udržitelný život Karlovy Vary, 2005. p. 191 ( p.)ISBN: 80-903634-0- 7.
    Detail

    KAPLAN, Z., PÍŠTĚK, V., NOVOTNÝ, P. Stirling Engine and Reliability. In Opotřebení, spolehlivost, diagnostika 2005. Brno: Univerzita obrany Brno, 2005. p. 93 ( p.)ISBN: 80-7231-026- 7.
    Detail

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Dynamics of Stirling Engine. In Dynamika tuhých a deformovatelných těles 2005. Ústí nad Labem: Univerzita J.E.Purkyně v Ústí nad Labem, ÚTŘV, 2005. p. 87 ( p.)ISBN: 80-7044-688- 9.
    Detail

    PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Virtual Prototype of Stirling Engine. Engineering Mechanics, 2005, vol. 12, no. A1, p. 45 ( p.)ISSN: 1802- 1484.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Dynamics of in-line six- cylinder diesel engine with rubber damper. In 23rd CADFEM Users Meeting 2005. International Congress on FEM Technology. Bonn: CADFEM GmbH, 2005. p. 1-16. ISBN: 3-937523-02- 2.
    Detail

    KAPLAN, Z., PÍŠTĚK, V., NOVOTNÝ, P. Design of Stirling Engine Displacer. In Dynamika tuhých a deformovatelných těles 2005. Ústí nad Labem: Univerzita J.E.Purkyně v Ústí nad Labem, ÚTŘV, 2005. p. 49 ( p.)ISBN: 80-7044-688- 9.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Multibody Analysis in Powertrain Development. In Dynamika tuhých a deformovatelných těles 2005. Ústí nad Labem: Univerzita J.E.Purkyně v Ústí nad Labem, ÚTŘV, 2005. p. 95 ( p.)ISBN: 80-7044-688- 9.
    Detail

  • 2004

    PÍŠTĚK, V.; NOVOTNÝ, P. Investigation of Cranktrain Dynamics Using Multi- Body Simulation Modeling. In Setkání uživatelů MSC. Software 2004. Brno: MSC. Software, s.r.o., Brno, 2004. p. 17 ( p.)
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Dynamic Analysis of Diesel V8 Cranktrain. In 12. ANSYS User Meeting. Hrubá Skála: SWS FEM , s.r.o., Brno, 2004. p. 1 ( p.)
    Detail

    Rauscher, J., Píštěk, V. Motory osobních automobilů v roce 2003. In XXXV. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Brno: Mendelova zemědělská a lesnická univerzita v Brně, 2004. p. 313 ( p.)ISBN: 80-7157-776- 6.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P.; KAPLAN, Z. Stirling Engine Displacer Piston. In Opotřebení, spolehlivost, diagnostika 2004. Brno: Vojenská akademie v Brné, 2004. p. 95 ( p.)ISBN: 80-85960-77- X.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Multi- Body Analysis of Diesel Engine Dynamics. In XXXV. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Brno: Mendelova zemědělská a lesnická univerzita v Brně, 2004. p. 90 ( p.)ISBN: 80-7157-776- 6.
    Detail

  • 2003

    PÍŠTĚK, V.; NOVOTNÝ, P. ANSYS and ADAMS Tools for Design of Diesel Engines. In 11. ANSYS & STAR CD Users Meeting Česká republika a Slovensko 2003. Brno: SVS FEM s.r.o. Brno, 2003. p. I-A- 8 ( p.)ISBN: 80-239-1598- 3.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Engine - a Tool for Reliability Increase. In Spolehlivost 2003. Brno: Vojenská akademie Brno, 2003. p. 113-118. ISBN: 80-85960-63- X.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Powertrain Dynamics Analyses by Virtual Engine. MECCA - Journal of Middle European Costruction and Design of Cars, 2003, vol. 1, no. 3, p. 20 ( p.)ISSN: 1214- 0821.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Engine Design in ANSYS and ADAMS. In MOTOR SYMPO 2003. 13th International Symposium. Brno: ČVUT v Praze, 2003. p. 45-55. ISBN: 80-02-01561- 4.
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Powertrain Dynamics Solution by Virtual Engine. In XXXIV. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Sborník přednášek KOKA 2003. Liberec: Technická univerzita v Liberci, katedra strojů průmyslové dopravy, 2003. p. 104-109. ISBN: 80-7083-742- X.
    Detail

  • 2002

    PÍŠTĚK, V., NOVOTNÝ, P. Výpočtový model radiálního ložiska pro virtuální motor. In XXXIII. medzinárodá konferencia katedier a pracovísk spal’ ovacích motorov slovenských a českých vysokých škô. Nitra, Slovenská republika: Slovenská polnohospodárska univerzita v Nitre, 2002. p. 183 ( p.)ISBN: 80-8069-051- 0.
    Detail

    PÍŠTĚK, V.; RAMÍK, P.; RAUSCHER, J. An Adaptive Dynamic Cranktrain Model. In ENGINEERING MECHANICS 2002. Svratka: ŽĎAS, a.s., 2002. p. 1-10. ISBN: 80-214-2109- 6.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. The Conversion of FE Model Between ANSYS and ADAMS System. In 10. ANSYS users Meeting. Čejkovice: SVS FEM s.r.o., 2002. p. 1 ( p.)ISBN: 80-238-9394- 7.
    Detail

    NOVOTNÝ, P.; PÍŠTĚK, V. Powertrain Multibody Analysis with Flexible Bodies. In 3rd ADAMS Users Meeting. Špindlerův mlýn: 2002. p. 1 ( p.)
    Detail

    PÍŠTĚK, V.; NOVOTNÝ, P. Simulationstechniken für die Triebwerksentwicklung. In Mechanical Engineering 2002. Bratislava: STU Bratislava, 2002. p. 1 ( p.)ISBN: 80-227-1783- 5.
    Detail

  • 2001

    PÍŠTĚK, V.; RAUSCHER, J.; RAMÍK, P.; ŠTĚTINA, J. Engine Structural Vibration Investigation with Non- Contact Dynamic Measurements. In 12th International Symposium MOTOR SYMPO 01. Praha: České vysoké učení technické v Praze, 2001. p. 103 ( p.)ISBN: 80-01-02382- 6.
    Detail

    PÍŠTĚK, V. Crank Mechanism Simulation - a Module of The Virtual Engine. In ENGINEERING MECHANICS 2001. Svratka: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, 2001. p. 211-212. ISBN: 80-85918-64- 1.
    Detail

    RAMÍK, P., PÍŠTĚK, V. Acquired Data Processing - "Blackbox" or Original Approach?. In XXXII. mezinárodní konference kateder a pracovišť spalovacích motorů České a Slovenské republiky. Brno: Vojenská akademie Brno, 2001. p. 222 ( p.)ISBN: 80-85960-27- 3.
    Detail

    PÍŠTĚK, V.; RAMÍK, P. Virtual Engine - a Tool for Reliability Increase. In SPOLEHLIVOST 2001. Brno: Vojenská akademie v Brně, 2001. p. 185 ( p.)ISBN: 80-85960-30- 3.
    Detail

    PÍŠTĚK, V.; RAMÍK, P.; RAUSCHER, J. Cranktrain Axial Vibrations. In XXXII. mezinárodní konference kateder a pracovišť spalovacích motorů České a Slovenské republiky. Brno: Vojenská akademie v Brně, 2001. p. 216 ( p.)ISBN: 80-85960-27- 3.
    Detail

    Píštěk, V., Ramík, P. Powertrain Simulation. In 1st Central And Eastern Europe ADAMS Users Conference. Praha: Mechanical Dynamics, s.r.o., 2001. p. 1 ( p.)
    Detail

  • 2000

    PÍŠTĚK, V., DUNG, L. Axial Vibrations of Crank Mechanism. In ENGINEERING MECHANICS 2000. Praha: Institute of Theoretical and Applied Mechanics Academy of Sciences of the Czech Republic, 2000. p. 245 ( p.)ISBN: 80-86246-03- 5.
    Detail

*) Publications are generated once a 24 hours.