Publications

• 2024

  NOVOTNÝ, P.; VACULA, J.; KUDLÁČEK, P.; KOCMAN, F. Prediction of gas leakage through the turbocharger sealing system. 55. mezinárodní vědecká konference zaměřená na výzkumné a výukové metody v oblasti vozidel a jejich pohonů. 1. Liberec: Technická univerzita v Liberce, Fakulta strojní, Katedra vozidel a motorů, 2024. p. 92-100. ISBN: 978-80-7494-711-7.
  Detail | WWW

  VACULA, J.; NOVOTNÝ, P.; KUDLÁČEK, P.; KOCMAN, F. Influence of a casing treatment on operating parameters of a centrifugal compressor. Liberec: Technická univerzita v Liberce, Fakulta strojní, Katedra vozidel a motorů, 2024. p. 66-72.
  Detail | WWW

  NOVOTNÝ, P.; VACULA, J.; KUDLÁČEK, P.; KOCMAN, F. Investigation of Gas Blow-by Through Turbocharger Sealing System Using Advanced Computational Simulations. Engineering Proceedings, 2024, vol. 79, no. 1, p. 1-5. ISSN: 2673-4591.
  Detail | WWW

• 2023

  NOVOTNÝ, P.; KUDLÁČEK, P.; VACULA, J. Explanation of the mechanisms of unsteady gas flow through the turbocharger seal system, including thermal and structural interactions. Propulsion and Power Research, 2023, vol. 12, no. 2, p. 180-198. ISSN: 2212-540X.
  Detail | WWW | Full text in the Digital Library

  VACULA, J.; NOVOTNÝ, P. Identification of Aerodynamic Tonal Noise Sources of a Centrifugal Compressor of a Turbocharger for Large Stationary Engines. Applied Sciences - Basel, 2023, vol. 13, no. 10, p. 1-20. ISSN: 2076-3417.
  Detail | WWW | Full text in the Digital Library

  NOVOTNÝ, P.; KUDLÁČEK, P.; VACULA, J.; KOCMAN, F. Innovative approach to reduce friction losses in turbocharger journal bearings. Scientific Proceeding KOKA 2023. 70. Brno: Brno University of Technology, Faculty of Mechanical Engineering, 2023. p. 20-20. ISBN: 978-80-214-6164-2.
  Detail

• 2022

  VACULA, J.; NOVOTNÝ, P. Critical pressure in liquids due to dynamic choking. PHYSICAL REVIEW E, 2022, vol. 105, no. 4, p. 1-10. ISSN: 2470-0045.
  Detail | WWW

  KUDLÁČEK, P.; NOVOTNÝ, P.; VACULA, J.; KOCMAN, F. Investigating the Effect of Rotor Design Changes on Mechanical Losses Due to Rotor-Fluid Interaction. Journal of Mechanical Engineering - Strojnícky časopis, 2022, vol. 72, no. 03, p. 71-80. ISSN: 2450-5471.
  Detail | WWW

  KUDLÁČEK, P.; NOVOTNÝ, P.; VACULA, J. Experimental Verification of the Effect of Rotor Design Changes on the Mechanical Losses. Scientific Proceedings KOKA 2022. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. p. 97-104. ISBN: 978-80-227-5215-2.
  Detail

  VACULA, J.; NOVOTNÝ, P.; KUDLÁČEK, P. Application of a Casing Treatment to a Centrifugal Compressor. Scientific Proceedings KOKA 2022. Bratislava: Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, 2022. ISBN: 978-80-227-5215-2.
  Detail

• 2021

  NOVOTNÝ, P.; VACULA, J.; JONÁK, M. Evolutionary Optimisation of the Thrust Bearing Considering Multiple Operating Conditions in Turbomachinery. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, vol. 195, no. 2021, p. 1-13. ISSN: 0020-7403.
  Detail | WWW

  NOVOTNÝ, P.; VACULA, J.; KUDLÁČEK, P. Virtual Turbocharger as a Tool for Reality Simulation. In Mechanisms and Machine Science, Proceedings of I4SDG Workshop 2021. 1. Cham: Springer, 2021. p. 535-544. ISBN: 978-3-030-87382-0.
  Detail | WWW | Full text in the Digital Library

  NOVOTNÝ, P.; VACULA, J.; KUDLÁČEK, P. Innovative Approach to Reduce Friction Losses in Turbocharger Thrust Bearings. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. p. 140-146. ISBN: 978-80-213-3132-7.
  Detail

  VACULA, J.; NOVOTNÝ, P.; KUDLÁČEK, P. Classification of Aerodynamic Instabilities in a Centrifugal Compressor. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. p. 90-98. ISBN: 978-80-213-3132-7.
  Detail

  DLUGOŠ, J.; NOVOTNÝ, P. Effective Implementation of Elastohydrodynamic Lubrication of Rough Surfaces into Multibody Dynamics Software. Applied Sciences - Basel, 2021, vol. 11, no. 4, p. 1-21. ISSN: 2076-3417.
  Detail | WWW | Full text in the Digital Library

  KUDLÁČEK, P.; NOVOTNÝ, P.; VACULA, J. Modelling Frictional Losses of Turbochargers due to Rotor-Fluid Interaction. Sborník přednášek KOKA 2021. Praha: Česká zemědělská univerzita v Praze, Technická fakulta, 2021. p. 100-111. ISBN: 978-80-213-3132-7.
  Detail

  VACULA, J.; NOVOTNÝ, P. An Overview of Flow Instabilities Occurring in Centrifugal Compressors Operating at Low Flow Rates. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2021, vol. 143, no. 11, p. 1-13. ISSN: 0742-4795.
  Detail | WWW

  NOVOTNÝ, P.; VACULA, J.; HRABOVSKÝ, J. Solution strategy for increasing the efficiency of turbochargers by reducing energy losses in the lubrication system. Energy, 2021, vol. 236, no. 121402, p. 1-16. ISSN: 0360-5442.
  Detail | WWW

• 2020

  NOVOTNÝ, P.; HRABOVSKÝ, J. Efficient computational modelling of low loaded bearings of turbocharger rotors. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, vol. 174, no. 2020, p. 374-383. ISSN: 0020-7403.
  Detail | WWW

  NOVOTNÝ, P.; VACULA, J.; DLUGOŠ, J.; JONÁK, M. Analytical Tool for the Identification of Vibration and Noise Sources in Turbochargers. 51st International Scientific Conference of Czech and Slovak Universities and Institutions Dealing with Motor Vehicles and Internal Combustion Engines Research. 1. Praha: České vysoké učení technické v Praze, 2020. p. 46-51. ISBN: 978-80-01-06744-4.
  Detail

  NOVOTNÝ, P.; HRABOVSKÝ, J.; KLÍMA, J.; HORT, V. Improving the thrust bearing performance of turbocharger rotors using optimization methods and virtual prototypes. In 12th International Conference on Vibrations in Rotating Machinery. 1st Edition. London: CRC Press, 2020. p. 100-111. ISBN: 9781003132639.
  Detail | WWW

  NOVOTNÝ, P.; DLUGOŠ, J.; VACULA, J. Application of Multibody Dynamics Tools for Determination of Engine Excited Turbocharger Vibrations. In ENGINEERING MECHANICS 2020. 1st edition. 2020. p. 384-387. ISBN: 978-80-214-5896-3.
  Detail | WWW

• 2019

  NOVOTNÝ, P.; HRABOVSKÝ, J.; JURAČKA, J.; KLÍMA, J.; HORT, V. Effective thrust bearing model for simulations of transient rotor dynamics. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, vol. 157, no. 2019, p. 374-383. ISSN: 0020-7403.
  Detail | WWW

  NOVOTNÝ, P.; ŠKARA, P. Multibody simulation of turbocharger transient rotordynamics. In ENGINEERING MECHANICS 2019. First edition. 2019. p. 259-262. ISBN: 978-80-87012-71-0.
  Detail | WWW

  NOVOTNÝ, P.; HRABOVSKÝ, J. Review of methods for increasing the mechanical efficiency of exhaust gas turbochargers. In Proceedings of the L. International Scientific Conference of Czech and Slovak Universities and Institutions Dealing with Motor Vehicles and Internal Combustion Engines Research – KOKA 2019. 1. Nitra: Publishing Centre of Slovak University of Agriculture in Nitra, 2019. p. 225-234. ISBN: 978-80-7509-668-5.
  Detail

• 2018

  NOVOTNÝ, P.; ŠKARA, P.; HLINÍK, J. The effective computational model of the hydrodynamics journal floating ring bearing for simulations of long transient regimes of turbocharger rotor dynamics. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, vol. 148, no. 2018, p. 611-619. ISSN: 0020-7403.
  Detail | WWW

  NOVOTNÝ, P.; JONÁK, M.; DLUGOŠ, J.; HLINÍK, J.; DOMAN, J. Solution approaches and tools for turbocharger development. In KOKA 2018 Scientific Proceedings. Nitra: Publishing Centre of Slovak University of Agriculture in Nitra, 2018. p. 79-88. ISBN: 978-80-552-1880-9.
  Detail

  DLUGOŠ, J.; NOVOTNÝ, P. Piston secondary motion measurement by laser displacement sensors. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE Intenational, 2018. p. 170-175. ISSN: 2345-0533.
  Detail | WWW | Full text in the Digital Library

  NOVOTNÝ, P.; DLUGOŠ, J.; DOMAN, J.; HLINÍK, J.; JONÁK, M. Simulation approach for a solution of turbocharger rotordynamic noise. In Vibroengineering Procedia. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. p. 144-149. ISSN: 2345-0533.
  Detail

  NOVOTNÝ, P. Virtual Turbocharger – A Tool for Powertrain Development. Stuttgart, Germany: FEV GmbH, 2018. p. 1-20.
  Detail

  NOVOTNÝ, P.; JONÁK, M.; DOMAN, J. Vibration analysis of the turbocharger considering low frequency excitations. In Transport Means 2018 – Proceedings of the 22nd International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2018. p. 759-764. ISSN: 1822-296X.
  Detail | WWW

• 2017

  NOVOTNÝ, P. Mixed Lubrication Solution of Dynamically Loaded Radial Slide Bearings. Tribology in Industry, 2017, vol. 39, no. 1, p. 82-89. ISSN: 0354-8996.
  Detail | WWW | Full text in the Digital Library

  NOVOTNÝ, P.; DLUGOŠ, J.; PROKOP, A.; ŘEHÁK, K.; RAFFAI, P. Effective computational model for a solution of turbocharger rotor dynamics. Journal of Vibroengineering, 2017, vol. 19, no. 2, p. 724-736. ISSN: 1392-8716.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L.; PROKOP, A.; ŘEHÁK, K. Modelling the powertrain rubber coupling under dynamic conditions. Journal of Vibroengineering, 2017, vol. 19, no. 5, p. 3710-3719. ISSN: 1392-8716.
  Detail

  NOVOTNÝ, P.; DLUGOŠ, J. Innovative Model of Radial Fluid Bearing for Simulations of Turbocharger Rotordynamics. In Mechatronics 2017 Recent Technological and Scientific Advances. Advances in Intelligent Systems and Computing. Cham: Springer International Publishing AG, 2017. p. 356-364. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
  Detail

  NOVOTNÝ, P. Increasing The Mechanical Efficiency of Turbochargers. In Sborník přednášek XLVIII. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. 1. Liberec: Technická univerzita v Liberci, 2017. p. 145-157. ISBN: 978-80-7494-354-6.
  Detail

  STODOLA, J.; NOVOTNÝ, P. Virtual Engine a Tool for Truck Reliability Increase. In 4TH INTERNATIONAL CONFERENCE ON MANUFACTURING AND INDUSTRIAL TECHNOLOGIES (ICMIT 2017). IOP Conference Series: Materials Science and Engineering. 4. Lisbon, PORTUGAL: IOP Publishing, 2017. p. 1-5. ISSN: 1757-899X.
  Detail | WWW

  NOVOTNÝ, P. Thrust Bearing – Analysis and Design Proposals. Brno: VUT v Brně, 2017. p. 1-32.
  Detail

  NOVOTNÝ, P.; FRANZ, R.; DUNDÁLEK, R. Zhodnocení emisních parametrů prototypu motoru P3. 2017. p. 1-20.
  Detail

  NOVOTNÝ, P.; FRANZ, R.; DUNDÁLEK, R. Přehled trendů pro komponent motoru. 2017. p. 1-18.
  Detail

  NOVOTNÝ, P.; FRANZ, R.; DUNDÁLEK, R. Zkoušeky motoru P3 v traktoru. 2017. p. 1-20.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P. Torsional vibration analysis of crank train with low friction losses. Journal of Vibroengineering, 2017, vol. 19, no. 8, p. 5691-5701. ISSN: 1392-8716.
  Detail

  NOVOTNÝ, P. Analysis of Noise and Vibration Sources of Turbocharger. 2017. p. 1-32.
  Detail

• 2016

  NOVOTNÝ, P.; ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M. Solution of dynamics and acoustics by virtual powertrain. In Engineering Mechanics 2016. PRAGUE, CZECH REPUBLIC: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, 2016. p. 482-486. ISBN: 978-80-87012-59- 8.
  Detail

  DLUGOŠ, J.; NOVOTNÝ, P.; RAFFAI, P. Advanced Computational Analysis of Connecting Rod of an Aircraft Engine. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 199-206. ISSN: 1662-7482.
  Detail | WWW

  NOVOTNÝ, P.; RAFFAI, P.; DLUGOŠ, J. Virtual Turbocharger Rotor – a Tool for Rotordynamics Solution. In Deterioration Dependability Diagnostics. 1. Brno: Universita Obrany, 2016. p. 29-37. ISBN: 978-80-7231-376- 1.
  Detail

  NOVOTNÝ, P.; DLUGOŠ, J.; RAFFAI, P. Computational simulation of the turbocharger rotor mechanical noise. In Vibroengineering Procedia. Vibroengineering Procedia. 7. Geliu ratas 15A, LT-50282,Kaunas, Lithuania: Vibroengineering PROCEDIA, 2016. p. 110-115. ISSN: 2345-0533.
  Detail

  NOVOTNÝ, P.; PROKOP, A.; ŘEHÁK, K. Complex strategy for a development of highly elastic couplings. In Vibroengineering PROCEDIA. Vibroengineering Procedia. 7. Geliu ratas 15A, LT-50282,Kaunas, Lithuania: JVE International Ltd., 2016. p. 97-102. ISSN: 2345-0533.
  Detail

  NOVOTNÝ, P.; DLUGOŠ, J.; RAFFAI, P. Advanced Computational Strategy for Simulation of Turbocharger Rotordynamics. In Transport Means. 2016. Transport Means. Kaunas, Lithuania: 2016. p. 134-137. ISSN: 1822-296X.
  Detail

  NOVOTNÝ, P.; VOPAŘIL, J. Development of Highly Elastic Couplings for Natural Gas Engines. In Transport Means 2016. Transport Means. Kaunas, Lithuania: 2016. p. 93-98. ISSN: 1822-296X.
  Detail

  NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; DLUGOŠ, J.; KNOTEK, J. Mixed Lubrication Solution with Consideration of Elastic Deformations and Real Surface Roughness Structures. Journal of the Balkan Tribological Association, 2016, vol. 2016, no. 4, p. 3292-3312. ISSN: 1310-4772.
  Detail

  ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M.; NOVOTNÝ, P. INVESTIGATION OF SINGLE STAGE GEARBOX PARAMETERS INFLUENCING SURFACE NORMAL VELOCITY. In Engineering Mechanics 2016. 2016. p. 478-481. ISBN: 978-80-87012-59- 8.
  Detail

  DLUGOŠ, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; KNOTEK, J. Development of Computational Model of Piston Dynamics Behaviour. In ENGINEERING MECHANICS 2016 - 22nd INTERNATIONAL CONFERENCE. Prague, Czech Republic: Institute of Thermomechanics Academy of Sciences of the Czech Republic, v.v.i., 2016. p. 126-129. ISBN: 978-80-87012-59- 8.
  Detail

  MARŠÁLEK, O.; NOVOTNÝ, P.; KNOTEK, J. Numerical Solution of Micro- lubrication in Internal Combustion Engine Journal Bearing. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 159-166. ISSN: 1662- 7482.
  Detail | WWW

  KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Multibody Based Tool for Simulation of the Turbocharger Rotor Dynamics. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 229-235. ISSN: 1662-7482.
  Detail | WWW

  RAFFAI, P.; NOVOTNÝ, P.; DLUGOŠ, J. Computer Simulation of the Behavior of the Piston Ring Pack of Internal Combustion Engines. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 166-171. ISSN: 1662-7482.
  Detail | WWW

  KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; DLUGOŠ, J. Influence of Turbine and Compressor Wheel Mass and Inertia on the Rotor Dynamics of Turbocharger. Tribology in Industry, 2016, vol. 38, no. 1, p. 24-32. ISSN: 0354-8996.
  Detail | WWW | Full text in the Digital Library

  DLUGOŠ, J.; NOVOTNÝ, P.; RAFFAI, P. Difficulties in Computational Modelling of Piston/ Liner Interaction. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2016. p. 134-137. ISSN: 2345-0533.
  Detail | Full text in the Digital Library

  NOVOTNÝ, P.; PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K. Investigating the influence of computational model complexity on noise and vibration modeling of powertrain. Journal of Vibroengineering, 2016, vol. 18, no. 1, p. 378-393. ISSN: 1392-8716.
  Detail | WWW | Full text in the Digital Library

• 2015

  NOVOTNÝ, P.; DLUGOŠ, J.; KNOTEK, J.; MARŠÁLEK, O.; RAFFAI, P. Role of Computational Simulations In Design Process of Piston Rings. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2014, no. 3, p. 1-7. ISSN: 1214- 0821.
  Detail | WWW

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Approach for Assessment of Experimental Gearbox NVH Parameters. In FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY V. 1. Hong Kong, PEOPLES R CHINA: DESTECH PUBLICATIONS, INC, 439 DUKE STREET, LANCASTER, PA 17602-4967 USA, 2015. p. 266-271. ISBN: 978-1-60595-270-3.
  Detail

  NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; KNOTEK, J.; DLUGOŠ, J. Methods for Solution of Slide Bearing Tribology and Dynamics. In Deterioration, Dependability, Diagnostics. Brno: University of Defence, 2015. p. 61-68. ISBN: 978-80-7231-431- 7.
  Detail

  NOVOTNÝ, P. Experimetnální analýza skříně turbodmychadla. 2015. p. 1-20.
  Detail

  NOVOTNÝ, P. Vývoj numerických algoritmů. 2015. p. 1-20.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Complex Evaluation of Transmission NVH Parameters. In Transport Means 2015. Transport Means. Kaunas: Kaunas University of Technology, 2015. p. 563-566. ISSN: 1822-296X.
  Detail

  RAFFAI, P.; NOVOTNÝ, P.; MARŠÁLEK, O. Numerical Calculation of Mechanical Losses of the Piston Ring Pack of Internal Combustion Engines. Journal of the Balkan Tribological Association, 2015, vol. 2015, no. 4, p. 796-809. ISSN: 1310-4772.
  Detail | WWW

  MARŠÁLEK, O.; NOVOTNÝ, P.; KNOTEK, J. Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing Numerical Solution of Micro- lubrication in Internal Combustion Engine Journal Bearing. In Engineering Mechanics 2015. 1. Prague: Institute of Theoretical and Applied Mechanics, Avademy of Sciences of the Czech Republic, v.v.i, Prague, 2015. p. 192-193. ISBN: 978-80-86246-42- 0.
  Detail

  PROKOP, A.; ŘEHÁK, K.; ZUBÍK, M.; NOVOTNÝ, P. Experimental Validation of the Gearbox NVH Parameters. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 2, p. 16-21. ISSN: 1214- 0821.
  Detail

  ZUBÍK, M.; PROKOP, A.; ŘEHÁK, K.; NOVOTNÝ, P. The effect of the gear parameters to the noise of transmission. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2015. p. 357-362. ISSN: 2345-0533.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Computational tools for transmission dynamics modelling. In Setkání uživatelů MSC. SOFTWARE 2015. 1. MSC.Software s.r.o., 2015. p. 146-150.
  Detail

  MARŠÁLEK, O.; DLUGOŠ, J.; RAFFAI, P.; NOVOTNÝ, P.; KNOTEK, J. Experimental Determination of Contact Area. Tribology in Industry, 2015, vol. 37, no. 4, p. 427-433. ISSN: 0354- 8996.
  Detail | WWW

  MARŠÁLEK, O.; VOPAŘIL, J.; NOVOTNÝ, P. Validation of Analytical Calculation of Contact Pressure. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. Switzerland: Springer International Publishing, 2015. p. 495-500. ISBN: 978-3-319-23921- 7. ISSN: 2194- 5357.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P. Shape Design of a Fire- ring. In Scientific Proceedings KOKA 2015. Bratislava: Slovak University of Technology in Bratislava, 2015. p. 175-184. ISBN: 978-80-227-4424- 9.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P. Design and Simulation of Progressive Crank Train. In Transport Means 2014: Proceeding of the 19th International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2015. p. 240-243. ISBN: 9955-09-935- 6. ISSN: 1822-296X.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V. Dynamic Simulation of Progressive Crank Train. In Advanced Mechatronics Solution. Advances in Intelligent Systems and Computing. 393. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer International Publishing Switzerland, 2015. p. 207-212. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
  Detail

  DLUGOŠ, J.; NOVOTNÝ, P. Computational Modelling of Piston Ring Dynamics in 3D. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 1, p. 1-7. ISSN: 1214- 0821.
  Detail | WWW

  RAFFAI, P.; NOVOTNÝ, P.; DLUGOŠ, J. Computer Simualation of the Behavior of the Piston Ring Pack of Internal Combustion Engines. In ENGINEERING MECHANICS 2015 - 21st INTERNATIONAL CONFERENCE. Prague, Czech Republic: Academy of Sciences of the Czech Republic, v.v.i., 2015. p. 252-253. ISBN: 978-80-86246-42- 0.
  Detail

  MARŠÁLEK, O.; DLUGOŠ, J.; NOVOTNÝ, P.; ZHÁŇAL, L. Contact Area Evaluation Experiment Verified by Computational Model in MBS. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. Switzerland: Springer International Publishing, 2015. p. 489-494. ISBN: 978-3-319-23921- 7. ISSN: 2194- 5357.
  Detail

  DLUGOŠ, J.; NOVOTNÝ, P.; RAFFAI, P. Advanced Computational Analysis of Connecting Rod of an Aircraft Engine. In ENGINEERING MECHANICS 2015 - 21st INTERNATIONAL CONFERENCE. Prague, Czech Republic: Academy of Sciences of the Czech Republic, v.v.i., 2015. p. 48-49. ISBN: 978-80-86246-42- 0.
  Detail

  KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Multibody Based Tool for Simulation of the Turbocharger Rotor Dynamics. In Engineering Mechanics 2015. Prague: Institute of Theoretical and Applied Mechanics, Academy of Science of the Czech Republic, 2015. p. 138-139. ISBN: 978-80-86246-42- 0.
  Detail

  KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P. Multi Body Analysis of the Turbocharger Supported by Fully Floating Ring Bearing. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 1, p. 14-18. ISSN: 1214- 0821.
  Detail

  PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. VIRTUAL GEARBOX DEVELOPMENT AND VERIFICATION. In KOKA 2015. Bratislava: Faculty of Mechanical Engineering, Slovak University of Technology and Designing, Department of Cars, Ships and Combustion Engines, 2015. p. 239-244. ISBN: 978-80-227-4424- 9.
  Detail

  MARŠÁLEK, O.; VOPAŘIL, J.; RAFFAI, P.; NOVOTNÝ, P. SELECTION OF ANALYTICAL COMPUTATIONAL MODEL OF CONTACT PRESSURE. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 13, no. 2, p. 10-15. ISSN: 1214- 0821.
  Detail | WWW

  KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; DLUGOŠ, J. The Influence of rotor unbalance on turbocharger rotor dynamics. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 3, p. 8-13. ISSN: 1214-0821.
  Detail

  NOVOTNÝ, P. Souhrnná zpráva o postupu prací za rok 2015. 2015. p. 1-52.
  Detail

• 2014

  NOVOTNÝ, P.; MARŠÁLEK, O.; ZUBÍK, M.; DRÁPAL, L. Analysis of Slide Bearing Computational Models Considering Elastic Deformations and Rough Surfaces. In Engineering Mechanics 2014. 1. Brno University of Technology, 2014. p. 444-447. ISBN: 978-80-214-4871-1.
  Detail

  NOVOTNÝ, P.; MARŠÁLEK, O.; KNOTEK, J.; DRÁPAL, L. Computational approaches for slide bearing modelling. In Proceedings of the 45th International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engine. I. Kostelec nad Černými lesy: CZECH UNIVERSITY OF LIFE SCIENCE PRAGUE, 2014. p. 25-32. ISBN: 978-80-7375-801- 1.
  Detail

  KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Modern approach to turbocharger rotordynamic analysis. In Proceedings of the 45th International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engine. I. Kostelec nad Černými lesy: CZECH UNIVERSITY OF LIFE SCIENCE PRAGUE, 2014. p. 33-40. ISBN: 978-80-7375-801- 1.
  Detail

  RAFFAI, P.; NOVOTNÝ, P.; MARŠÁLEK, O. Numerical Calculation of Mechanical Losses of the Piston Ring Pack of Internal Combustion Engines. In BALKANTRIB 2014 - 8th INTERNATIONAL CONFERENCE ON TRIBOLOGY. Sinaia, Romania: Petroleum- Gas University of Ploiesti Publishing House, 2014. p. 734-747. ISBN: 978-973-719-570- 8.
  Detail

  VOPAŘIL, J.; DRÁPAL, L.; NOVOTNÝ, P. Aircraft engine crankshaft optimisation. MECCA - Journal of Middle European Costruction and Design of Cars, 2014, vol. XII, no. 1, p. 1-6. ISSN: 1214- 0821.
  Detail

  ZUBÍK, M.; NOVOTNÝ, P.; PROKOP, A.; JANOUŠEK, M. Virtual Powertrain – a Tool for NVH Improvement. In Setkání uživatelů MSC. SOFTWARE 2014. 1. MSC.Software s.r.o., 2014. p. 95-100. ISBN: 978-80-260-6033- 8.
  Detail

  MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P. Micro- lubrication of Directionally Oriented Contact Surfaces. Tribology in Industry, 2014, vol. 36, no. 4, p. 451-465. ISSN: 0354- 8996.
  Detail | WWW

  MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P. Micro- lubrication of directionally oriented contact surfaces. In BALKANTRIB 2014 - 8th INTERNATIONAL CONFERENCE ON TRIBOLOGY. Sinaia, Romania: Petroleum- Gas University of Ploiesti Publishing House, 2014. p. 202-216. ISBN: 978-973-719-570- 8.
  Detail

  KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Multibody Analysis of Turbocharger Rotor Dynamics. In Setkání uživatelů MSC.Software s.r.o. 2014. Brno: MSC.Software s.r.o., 2014. p. 66-73. ISBN: 978-80-260-6033- 8.
  Detail

• 2013

  NOVOTNÝ, P.; SVÍDA, D. Výzkumná zprávaz řešení projektu. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-28.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V.; MARŠÁLEK, O. Advanced Crankshaft for Low Power Losses. In Deterioration, Dependability, Diagnostics. University of Defence. Brno: University of Defence, 2013. p. 229-236. ISBN: 978-80-7231-939- 8.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L. Vyvážení řadového vznětového tříválce. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-28.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L. Pevnostní analýza klikového a vyvažovacího hřídele řadového vznětového tříválce. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-15.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Podpora konstrukce při vývoji dvoudobého vznětového motoru s protiběžnými písty. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-10.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; SVÍDA, D.; DRÁPAL, L. Efficient approach for solution of the mechanical losses of the piston ring pack. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D- JOURNAL OF AUTOMOBILE ENGINEERING, 2013, vol. 2013, no. 224, p. 1377-1388. ISSN: 0954- 4070.
  Detail

  NOVOTNÝ, P. Computational modelling as a design support in powertrain development. Brno: 2013. p. 1-30.
  Detail

  NOVOTNÝ, P.; SVÍDA, D.; BERAN, M. Výzkum a vývoj nových systémů sledování teploty. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-58.
  Detail

  NOVOTNÝ, P.; SVÍDA, D.; BERAN, M. Výzkum a vývoj nových systémů sledování teploty - etapa II. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-80.
  Detail

  NOVOTNÝ, P. Predikce profukku turbodmychadlem. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-40.
  Detail

  NOVOTNÝ, P.; SVÍDA, D.; BERAN, M. Výzkum možností akumulace tepla. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-86.
  Detail

  NOVOTNÝ, P.; SVÍDA, D.; BERAN, M. Výzkum a vývoj nového typu výměníku tepla při motorových zkouškách. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-42.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; PÍŠTĚK, V. Methods of Enhancing Mechanical Efficiency of Cranktrain. In Setkání uživatelů MSC.Software s.r.o. 2013. Příkop 4, 602 00, Brno: MSC. Software, 2013. p. 144-156. ISBN: 978-80-260-4173- 3.
  Detail

  MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P.; DRÁPAL, L.; PÍŠTĚK, V. Mixed Lubrication Simulation of Slide Bearings. In Setkání uživatelů MSC.Software s.r.o. 2013. Brno: MSC. Software, 2013. p. 157-163. ISBN: 978-80-260-4173- 3.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V.; MARŠÁLEK, O. Computational Modelling of a Progressive Cranktrain. In Sborník příspěvků Mezinárodní Masarykovy konference pro doktorandy a mladé vědecké pracovníky 2013. Hradec Králové: MAGNANIMITAS, 2013. p. 3616-3625. ISBN: 978-80-87952-00- 9.
  Detail

  RAFFAI, P.; NOVOTNÝ, P.; PÍŠTĚK, V.; MARŠÁLEK, O.; DRÁPAL, L. Piston Rings Dynamics Simulation. In Setkání uživatelů MSC.Software s.r.o. 2013. Příkop 4, 602 00, Brno: MSC. Software, 2013. p. 139-144. ISBN: 978-80-260-4173- 3.
  Detail

  JANOUŠEK, M.; PROKOP, A.; NOVOTNÝ, P. Locating of the Noise Sources in Automotive Industry. In Proceedings of the XLIV. International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines. Brno: Mendelova univerzita v Brně, 2013. p. 133-140. ISBN: 978-80-7375-801- 1.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P.; MAUDER, T.; KLIMEŠ, L. Parameter identification of rheological models using optimization algorithms. In Mechatronics 2013: Recent Technological and Scientific Advances. Springer- Verlag, 2013. p. 193-198. ISBN: 978-3-319-02293- 2.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; PÍŠTĚK, V. A Conceptual Study of Cranktrain with Low Friction Losses. MECCA - Journal of Middle European Costruction and Design of Cars, 2013, vol. XI, no. 2, p. 6-11. ISSN: 1214- 0821.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; PÍŠTĚK, V. Progressive Cranktrain with Low Friction Losses. In Proceedings of the XLIV. International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines. Brno: Mendelova univerzita v Brně, 2013. p. 174-183. ISBN: 978-80-7375-801- 1.
  Detail

  MARŠÁLEK, O.; NOVOTNÝ, P.; DRÁPAL, L.; RAFFAI, P.; PÍŠTĚK, V. Comprehensive Strategy for Computational Modelling of Mixed Lubrication Regime. In Proceedings of the XLIV. International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engines. Brno: Mendelova univerzita v Brně, 2013. p. 51-56. ISBN: 978-80-7375-801- 1.
  Detail

  MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P.; DRÁPAL, L.; PÍŠTĚK, V. Overview of Computational Models Used for Mixed Lubrication. In Mechatronics 2013 - Recent Technological and Scientific Advances. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer- Verlag Berlin Heidelberg, 2013. p. 111-117. ISBN: 978-3-319-02293- 2.
  Detail

  VANČURA, J.; BLAŤÁK, O.; ROZSÍVAL, J.; NOVOTNÝ, P. Analýza proudění motorovým prostorem osobního automobilu. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-54.
  Detail

  NOVOTNÝ, P.; PROKOP, A. Řešení problematiky vibrací a hluku převodovky. VUT v Brně, Technicka 2896/2, A3/ 519a: 2013. p. 1-28.
  Detail

• 2012

  NOVOTNÝ, P. Stavba CAE modelu. VUT v Brně, Technicka 2896/2, A3/ 519a: 2012. p. 1-20.
  Detail

  DRÁPAL, L.; PÍŠTĚK, V.; NOVOTNÝ, P.; BERAN, M. Cranktrain Dynamics Simulation. Perners' Contacts, 2012, vol. VII, no. 4, p. 26-34. ISSN: 1801- 674X.
  Detail

  NOVOTNÝ, P. Vývoj systému sledování deformací. VUT v Brně, Technicka 2896/2, A3/ 519a: 2012. p. 1-25.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L. Pevnostní analýza tlakové nádoby. VUT v Brně, Technicka 2896/2, A3/ 519a: 2012. p. 1-32.
  Detail

• 2011

  NOVOTNÝ, P.; PÍŠTĚK, V. Virtual Engine - A Tool for a Powertrain Dynamic Solution. STROJNISKI VESTNIK- JOURNAL OF MECHANICAL ENGINEERING, 2011, vol. 2011, no. 57, p. 611-621. ISSN: 0039-2480.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L.; AMBRÓZ, R. Development of Aircraft Diesel Engine for Military Use. Advances in Military Technology, 2011, vol. 2011 (6), no. 1, p. 5-20. ISSN: 1802- 2308.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Simulation of Piston Ring Pack Tribology. 1. 1. Brno: University of Defence, 2011. 249 p. ISBN: 978-80-260-0633- 6.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L. Analýza kluzných ložisek klikového mechanismu leteckého motoru. Brno: 2011. p. 1-18.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L. Analýza ojnice leteckého motoru. Brno: 2011. p. 1-9.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L. Návrh tvaru kroužku. Brno: 2011. p. 1-5.
  Detail

  DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V.; AMBRÓZ, R. Crankshaft Development of a Two-stroke Compression-ignition Engine with Contra- running Pistons. MECCA - Journal of Middle European Costruction and Design of Cars, 2011, vol. IX., no. 1, p. 18-27. ISSN: 1214-0821.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Modeling of Piston Ring Pack Dynamics. MECCA - Journal of Middle European Costruction and Design of Cars, 2011, vol. 2011, no. 3, p. 12-20. ISSN: 1214- 0821.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L. Analýza typu a umístnění pohonu kompresoru. Brno: 2011. p. 1-24.
  Detail

  DRÁPAL, L.; PÍŠTĚK, V.; NOVOTNÝ, P.; AMBRÓZ, R. Virtual Prototyping as Tool for Powertrain Development. In Mechatronics Recent Technological and Scientific Advances. 1. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer- Verlag Berlin Heidelberg, 2011. p. 3-8. ISBN: 978-3-642-23243- 5.
  Detail

  AMBRÓZ, R.; PÍŠTĚK, V.; NOVOTNÝ, P.; PROKOP, A. Simulation and Experimental Tools For Powertrain Noise Reduction. Technológ, 2011, vol. 2011, no. 3, p. 28-36. ISSN: 1337- 8996.
  Detail

  DRÁPAL, L.; PÍŠTĚK, V.; NOVOTNÝ, P.; AMBRÓZ, R. Virtual Engine Application For Powertrain Dynamics. Technológ, 2011, vol. 2011, no. 3, p. 45-56. ISSN: 1337- 8996.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Dynamic Simulation Of Piston Ring Pack. Technológ, 2011, vol. 2011, no. 3, p. 12-20. ISSN: 1337- 8996.
  Detail

• 2010

  NOVOTNÝ, P.; PÍŠTĚK, V. New efficient methods for powertrain vibration analysis. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D- JOURNAL OF AUTOMOBILE ENGINEERING, 2010, vol. 2010, no. 224, p. 611-629. ISSN: 0954- 4070.
  Detail

  NOVOTNÝ, P.; DRÁPAL, L. Klikový hřídel motoru DAPL aktuální stav návrhu. Brno: 2010. p. 1-19.
  Detail

  NOVOTNÝ, P.; AMBRÓZ, R. Srovnání variant vyústění mazacího kanálku klikového hřídele. Brno: 2010. p. 1-10.
  Detail

  NOVOTNÝ, P. Pevnostní kontrola hlavních částí motoru DAPL. Brno: 2010. p. 1-21.
  Detail

  VANČURA, J.; NOVOTNÝ, P.; PORTEŠ, P.; BLAŤÁK, O. Aerodynamic characteristics computation of open wheel racing car. MECCA - Journal of Middle European Costruction and Design of Cars, 2010, vol. 2010, no. 1, p. 1-6. ISSN: 1214- 0821.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; SVÍDA, D. Solution of powertrain friction losses by virtual engine. MECCA - Journal of Middle European Costruction and Design of Cars, 2010, vol. 2010, no. 3, p. 12-20. ISSN: 1214- 0821.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L. Computational Tools in 3kW Stirling Engine Development. MECCA - Journal of Middle European Costruction and Design of Cars, 2010, vol. 2010, no. 1, p. 31-36. ISSN: 1214- 0821.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; DRÁPAL, L.; AMBRÓZ, R. Modern computational approaches to powertrain mechanical loss solution. Perners' Contacts, 2010, vol. 2010, no. 4, p. 159-170. ISSN: 1801- 674X.
  Detail

  NOVOTNÝ, P.; AMBRÓZ, R. Návrh odlehčení řemenice. Brno: 2010. p. 1-9.
  Detail

• 2009

  NOVOTNÝ, P.; PÍŠTĚK, V. Virtual Engine - A Tool For Noise And Vibration Solution. MECCA - Journal of Middle European Costruction and Design of Cars, 2009, vol. 2009, no. 1, p. 1-8. ISSN: 1214- 0821.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Virtual Prototype of Timing Chain Drive. Engineering Mechanics, 2009, vol. 2008, no. 1, p. 123-130. ISSN: 1802- 1484.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; AMBRÓZ, R. Friction Loss Analysis Of Powertrain Parts. MECCA - Journal of Middle European Costruction and Design of Cars, 2009, vol. 2009, no. 2, p. 1-5. ISSN: 1214- 0821.
  Detail

• 2008

  NOVOTNÝ, P.; PÍŠTĚK, V. Stirling Engine Development using Virtual Prototypes. Acta Mechanica Slovaca, 2008, vol. 2008, no. 4, p. 108-115. ISSN: 1335- 2393.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Noise and Vibration Reduction - the Cranktrain as a Main Powertrain Module. TRANSACTIONS ON TRANSPORT SCIENCES, 2008, vol. 2008, no. 1, p. 21-28. ISSN: 1802- 971X.
  Detail

• 2007

  NOVOTNÝ, P.; PÍŠTĚK, V. CAE Tools in Cranktrain Design. MECCA - Journal of Middle European Costruction and Design of Cars, 2007, vol. 2007, no. 1, p. 15-21. ISSN: 1214- 0821.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Multidimensional Simulation of Stirling Engine Regenerator. In SIMULATION MODELLING OF MECHATRONIC SYSTEMS III. Mechatronika. Brno: Brno University of Technology, Faculty on Mechanical Engineering, 2007. p. 205-214. ISBN: 978-80-214-3559- 9.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Camshaft Vibration Modelling in Multi- Body System. In Zborník. 1. Bratislava: KALSM SjF STU, 2007. p. 25-32. ISBN: 978-80-227-2714- 3.
  Detail

  NOVOTNÝ, P.; SVÍDA, D.; PÍŠTĚK, V. Tractor Cabin Acoustic Analysis. In Nové trendy v konštrukci a exploatácii vozidiel "Vozidlá 2007". Nitra: Slovenská polnohospodárska universita v Nitre, 2007. p. 183-190. ISBN: 978-80-8069-942- 0.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Non- contact Measurement of Cranktrain Vibrations. In 5. setkání uživatelů PULSE. 1. Praha: Spectris Praha spol. s r.o., 2007. p. 53-57. ISBN: 978-80-239-9240- 3.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; SVÍDA, D. Verification of Valvetrain Multi- Body Computational Model. In 5. setkání uživatelů PULSE. 1. Praha: Spectris Praha spol. s r.o., 2007. p. 58-64. ISBN: 978-80-239-9240- 3.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Heat Transfer in Stirling Engine Cylinders. In 5. setkání uživatelů PULSE. 1. Praha: Spectris Praha spol. s r.o., 2007. p. 69-75. ISBN: 978-80-239-9240- 3.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. CAE Tools in Valvetrain Design. In Nové trendy v konštrukcii a explotacii vozidel. 1. Nitra: Slovenská polnohospodářska univerzita v Nitre, 2007. p. 56-64. ISBN: 978-80-8069-942- 0.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. CFD Tools in Stirling Engine Virtual Design. In Recent Advances in Mechatronics. Mechatronics. Heidelberg: Springer, 2007. p. 125-132. ISBN: 978-3-540-73955- 5.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Crankshaft Fatigue Life Prediction of Tractor Engine. In FEMFAT User Meeting. 1. Steyr: Magna Steyr, 2007. p. 56-63.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. New Approach to Modelling of interacions between Combustion Engine Parts. In Opotřebení spolehlivost diagnostika 2007. 1. Brno: Universita obrany, 2007. p. 205-211. ISBN: 978-80-7231-294- 8.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Stirling Engine Regenerator Model. In Opotřebení spolehlivost diagnostika 2007. 1. Brno: Universita obrany, 2007. p. 217-223. ISBN: 978-80-7231-294- 8.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Multibody Analysis in Concept Phase of Valvetrain. MECCA - Journal of Middle European Costruction and Design of Cars, 2007, vol. 2007, no. 3, p. 8-13. ISSN: 1214- 0821.
  Detail

  SVÍDA, D.; NOVOTNÝ, P.; PÍŠTĚK, V. Simulation and Measurement of Mechanical- Acoustic Structure. In Opotřebení, Spolehlivost, Diagnostika 2007. 1. Brno: Universita Obrany, 2007. p. 295-300. ISBN: 978-80-7231-294- 8.
  Detail

  SVÍDA, D.; NOVOTNÝ, P.; PÍŠTĚK, V. NVH Analysis of Tractor Cabin. In XXXVIII. medzinárodná vedecká konferencia pracovníkov katedier a pracovísk spalovacích motorov vysokých škol na Slovensku a Čechách. 1. Bratislava: Katedra automobilov, Strojnícka fakulta STU v Bratislave, 2007. p. 231-238. ISBN: 978-80-227-2714- 3.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. CAE Tools in Powertrain Virtual Design Process. In Automotive - Impulse for Mechanical Engineering. 1. Magdeburg: Otto-Von- Guericke University Magdeburg, 2007. p. 145-152. ISBN: 978-3-929757-12- 5.
  Detail

• 2006

  NOVOTNÝ, P. Virtual Prototype of V8 Engine Roller Bearing. In Dynamika tuhých a deformovatelných těles 2006. 4. Ústí nad Labem: Fakulta výrobních technologií a managementu UJEP Ústí n.L., 2006. p. 147-154. ISBN: 80-7044-782- 6.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Stirling Engine Development Process - CFD Approach. In Opotřebení spolehlivost diagnostika 2006. 1. Brno: Universita Obrany, 2006. p. 163-168. ISBN: 80-7231-165- 4.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. Heat Transfer In Cylinders of External Heat Supply Engines. In Opotřebení spolehlivost diagnostika 2006. 1. Brno: Universita Obrany, 2006. p. 205-210. ISBN: 80-7231-165- 4.
  Detail

  NOVOTNÝ, P. Virtual Product Development and Modern Diesel Engines. In Setkání uživatelů MSC. SOFTWARE 2006. 1. Brno: MSC.Software s.r.o., 2006. p. 2-16.
  Detail

  KAPLAN, Z., PÍŠTĚK, V., NOVOTNÝ, P. Stirling Cycle and Renewable Sources of Energy. In Sborník z konference HYDROTURBO 2006. Vyhne, Slovenská republika: 2006. p. 25-34.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. CFD Approach to Stirling Engine Virtual Design Process. In SIMULATION MODELLING OF MECHATRONIC SYSTEMS II. Mechatronika. Brno: Brno University of Technology, Faculty on Mechanical Engineering, 2006. p. 205-214. ISBN: 80-214-3341- 8.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Development Process of Modern Diesel Engines. In Sborník abstraktů XXXVII. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Kostelec nad Černými lesy: Česká zemědělská univerzita v Praze, 2006. p. 39-46. ISBN: 80-213-1510- 5.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Development of Four- cylinder Diesel Engine. In 24th CADFEM Users' Meeting 2006 - International Congress on FEM Technology with 2006 German ANSYS Conference. 1. Marktplatz 2, 85567 Grafing, GERMANY: CADFEM GmbH, 2006. p. 101-122. ISBN: 3-937523-03- 0.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V.; STODOLA, J. Virtual Engine - a Tool for Military Truck Reliability Increase. Advances in Military Technology, 2006, vol. 2006, no. 1, p. 49-71. ISSN: 1802- 2308.
  Detail

• 2005

  NOVOTNÝ, P. Numerická simulace průstřelu želatinového bloku malorážovou střelou náboje ráže 9 mm Luger a 38 Special. In 1. Brno: Universita obrany, 2005. p. 35-44. ISBN: 80-85960-97- 4.
  Detail

  PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Micro Combined Heat and Power Plant Based on the Stirling Engine. MECCA - Journal of Middle European Costruction and Design of Cars, 2005, vol. 2005, no. 4, p. 8-16. ISSN: 1214- 0821.
  Detail | WWW

  PÍŠTĚK, V.; NOVOTNÝ, P.; KAPLAN, Z.; VLACH, R. Virtual Prototypes of External Heat Supply Engines. In Simulation Modelling of Mechatronic Systems I. Mechatronika. Brno: Faculty of Mechanical Engineering, Brno University of Technology, 2005. p. 197-206. ISBN: 80-214-3144- X.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Structural dynamics of the in-line six- cylinder tractor diesel engine. In Virtual Product Development Conference 2005. Mnichov: MSC.Software GmbH, Munich, Germany, 2005. p. 1-16.
  Detail

  PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Dynamic Computational Model of Stirling Engine. In Opotřebení, spolehlivost, diagnostika 2005. Brno: Univerzita obrany Brno, 2005. p. 137 ( p.)ISBN: 80-7231-026- 7.
  Detail

  PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Stirling Engine for Combined Production of Electricity and Heat. In 8th International Conference: Traffic and Technologies for Suistanable Development. Karlovy Vary: Společnost pro trvale udržitelný život Karlovy Vary, 2005. p. 191 ( p.)ISBN: 80-903634-0- 7.
  Detail

  KAPLAN, Z., PÍŠTĚK, V., NOVOTNÝ, P. Stirling Engine and Reliability. In Opotřebení, spolehlivost, diagnostika 2005. Brno: Univerzita obrany Brno, 2005. p. 93 ( p.)ISBN: 80-7231-026- 7.
  Detail

  PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Dynamics of Stirling Engine. In Dynamika tuhých a deformovatelných těles 2005. Ústí nad Labem: Univerzita J.E.Purkyně v Ústí nad Labem, ÚTŘV, 2005. p. 87 ( p.)ISBN: 80-7044-688- 9.
  Detail

  PÍŠTĚK, V.; KAPLAN, Z.; NOVOTNÝ, P. Virtual Prototype of Stirling Engine. Engineering Mechanics, 2005, vol. 12, no. A1, p. 45 ( p.)ISSN: 1802- 1484.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Dynamics of in-line six- cylinder diesel engine with rubber damper. In 23rd CADFEM Users Meeting 2005. International Congress on FEM Technology. Bonn: CADFEM GmbH, 2005. p. 1-16. ISBN: 3-937523-02- 2.
  Detail

  KAPLAN, Z.; NOVOTNÝ, P. Thermodynamics of Stirling Engine. Inženýrská mechanika - Engineering Mechanics, 2005, vol. 12, no. A1, p. 53 ( p.)ISSN: 1210- 2717.
  Detail

  KAPLAN, Z., PÍŠTĚK, V., NOVOTNÝ, P. Design of Stirling Engine Displacer. In Dynamika tuhých a deformovatelných těles 2005. Ústí nad Labem: Univerzita J.E.Purkyně v Ústí nad Labem, ÚTŘV, 2005. p. 49 ( p.)ISBN: 80-7044-688- 9.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Multibody Analysis in Powertrain Development. In Dynamika tuhých a deformovatelných těles 2005. Ústí nad Labem: Univerzita J.E.Purkyně v Ústí nad Labem, ÚTŘV, 2005. p. 95 ( p.)ISBN: 80-7044-688- 9.
  Detail

• 2004

  NOVOTNÝ, P. Application of Model of Lower Limb Part in Ballistic Experiments. In 1. 2004. p. 25-31.
  Detail

  NOVOTNÝ, P. Numerická simulace průstřelu želatinového bloku malorážovou střelou náboje ráže 9 mm Luger a 38 Special. In 1. Ostravice: 2004. p. 43-52.
  Detail

  NOVOTNÝ, P. Cranktrain Dynamics Simulation - Central Module of Virtual Engine. Cranktrain Dynamics Simulation - Central Module of Virtual Engine. Vědecké spisy Vysokého učení technického v Brně , Edice PhD Thesis. 1. Brno: VUT v Brně, 2004. p. 1-29. ISBN: 80-214-2884- 8. ISSN: 1213- 4198.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P.; KAPLAN, Z. Stirling Engine Displacer Piston. In Opotřebení, spolehlivost, diagnostika 2004. Brno: Vojenská akademie v Brné, 2004. p. 95 ( p.)ISBN: 80-85960-77- X.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Multi- Body Analysis of Diesel Engine Dynamics. In XXXV. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Brno: Mendelova zemědělská a lesnická univerzita v Brně, 2004. p. 90 ( p.)ISBN: 80-7157-776- 6.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Dynamic Analysis of Diesel V8 Cranktrain. In 12. ANSYS User Meeting. Hrubá Skála: SWS FEM , s.r.o., Brno, 2004. p. 1 ( p.)
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Investigation of Cranktrain Dynamics Using Multi- Body Simulation Modeling. In Setkání uživatelů MSC. Software 2004. Brno: MSC. Software, s.r.o., Brno, 2004. p. 17 ( p.)
  Detail

• 2003

  NOVOTNÝ, P. Simulace průstřelu ocelové desky malorážovou průbojnou střelou. In Brno: Vojenská akademie, 2003. p. 11-18.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. ANSYS and ADAMS Tools for Design of Diesel Engines. In 11. ANSYS & STAR CD Users Meeting Česká republika a Slovensko 2003. Brno: SVS FEM s.r.o. Brno, 2003. p. I-A- 8 ( p.)ISBN: 80-239-1598- 3.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Powertrain Dynamics Analyses by Virtual Engine. MECCA - Journal of Middle European Costruction and Design of Cars, 2003, vol. 1, no. 3, p. 20 ( p.)ISSN: 1214- 0821.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Powertrain Dynamics Solution by Virtual Engine. In XXXIV. mezinárodní konference kateder a pracovišť spalovacích motorů českých a slovenských vysokých škol. Sborník přednášek KOKA 2003. Liberec: Technická univerzita v Liberci, katedra strojů průmyslové dopravy, 2003. p. 104-109. ISBN: 80-7083-742- X.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Engine Design in ANSYS and ADAMS. In MOTOR SYMPO 2003. 13th International Symposium. Brno: ČVUT v Praze, 2003. p. 45-55. ISBN: 80-02-01561- 4.
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Virtual Engine - a Tool for Reliability Increase. In Spolehlivost 2003. Brno: Vojenská akademie Brno, 2003. p. 113-118. ISBN: 80-85960-63- X.
  Detail

• 2002

  NOVOTNÝ, P.; PÍŠTĚK, V. Powertrain Multibody Analysis with Flexible Bodies. In 3rd ADAMS Users Meeting. Špindlerův mlýn: 2002. p. 1 ( p.)
  Detail

  PÍŠTĚK, V.; NOVOTNÝ, P. Simulationstechniken für die Triebwerksentwicklung. In Mechanical Engineering 2002. Bratislava: STU Bratislava, 2002. p. 1 ( p.)ISBN: 80-227-1783- 5.
  Detail

  PÍŠTĚK, V., NOVOTNÝ, P. Výpočtový model radiálního ložiska pro virtuální motor. In XXXIII. medzinárodá konferencia katedier a pracovísk spal’ ovacích motorov slovenských a českých vysokých škô. Nitra, Slovenská republika: Slovenská polnohospodárska univerzita v Nitre, 2002. p. 183 ( p.)ISBN: 80-8069-051- 0.
  Detail

  NOVOTNÝ, P.; PÍŠTĚK, V. The Conversion of FE Model Between ANSYS and ADAMS System. In 10. ANSYS users Meeting. Čejkovice: SVS FEM s.r.o., 2002. p. 1 ( p.)ISBN: 80-238-9394- 7.
  Detail

*) Publications are generated once a 24 hours.