Detail projektu

NETME CENTRE PLUS

Období řešení: 01.01.2014 — 31.12.2018

Zdroje financování

Ministerstvo školství, mládeže a tělovýchovy ČR - Národní program udržitelnosti I (2013-2020)

- částečně financující (2014-01-01 - 2018-12-31)

O projektu

Základní, částečně aplikovaný výzkum v oblasti progresivních strojírenských technologií se zaměřením na energetiku, procesní inženýrství, environmentální technologie, mechatroniku, virtuální navrhování a zkušebnictví, leteckou a automobilní techniku a progresivní kovové materiály

Popis anglicky
Basic, partially applied research in the field of advanced mechanical engineering technologies focused on power suply, process engineering, environmental technologies, mechatronics, virtual design and testing, aircraft and automotive techniques and advanced metallic materials

Klíčová slova
nové technologie; strojírenství; mechatronika; virtuální navrhování; automobilní technika; progresivní kovové materiály;

Klíčová slova anglicky
New technologies; mechanical engineering; mechatronics; virtual design; automotive engineering; advanced materials; unique solutions; interdisciplinary approach

Označení

LO1202

Originální jazyk

čeština

Řešitelé

Hartl Martin, prof. Ing., Ph.D. - hlavní řešitel

Útvary

Centrum nových technologií ve strojírenství
- příjemce (01.01.2014 - 31.12.2018)

Výsledky

ŠLAPAL, J. Jordan curves in the digital plane. Bulletin of the Malaysian Mathematical Sciences Society, 2014, vol. 37, no. 2, p. 295-310. ISSN: 0126-6705.
Detail

VLAŠIC, F.; VOLÁK, J.; NOHÁL, L.; MAZAL, P.; HORT, F. Study of Initial Stages of Fatigue Process Using Non-destructive Testing Methods. Key Engineering Materials (print), 2014, vol. 592-593, no. 553, p. 553-556. ISSN: 1013-9826.
Detail

CHARVÁT, P.; KLIMEŠ, L.; ŠTĚTINA, J.; OSTRÝ, M. Thermal storage as a way to attenuate fluid temperature fluctuations - sensible vs. latent heat storage materials. Materiali in tehnologije, 2014, vol. 48, no. 3, p. 423-427. ISSN: 1580-2949.
Detail

LEŠTINSKÝ, P.; BRUMMER, V.; JECHA, D.; SKRYJA, P.; STEHLÍK, P. Design of catalytic oxidation unit for elimination of VOC and CO. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2014, vol. 53, no. 2, p. 732-737. ISSN: 0888-5885.
Detail

KLIMEŠ, L.; ŠTĚTINA, J. Unsteady model-based predictive control of continuous steel casting by means of very fast dynamic solidification model on GPU. Materiali in tehnologije, 2014, vol. 48, no. 4, p. 525-530. ISSN: 1580-2949.
Detail

BRUMMER, V.; JUŘENA, T.; HLAVÁČEK, V.; OMELKOVÁ, J.; BÉBAR, L.; GABRIEL, P.; STEHLÍK, P. Enzymatic hydrolysis of pretreated waste paper – Source of raw material for production of liquid biofuels. BIORESOURCE TECHNOLOGY, 2014, vol. 2014, no. 152, p. 543-547. ISSN: 0960-8524.
Detail

RAHULA, M.; VAŠÍK, P. Connections in control strategy. Proceedings of the Estonian Academy of Sciences, 2014, vol. 63, no. 1, p. 26-32. ISSN: 1736-6046.
Detail

KOTEK, L. Analýza HAZOP: výběr opatření pro snížení rizik. Automa, 2014, roč. 2014, č. 1, s. 28-29. ISSN: 1210-9592.
Detail

RAHULA, M.; VAŠÍK, P. A note on jet and geometric approach to higher order connections. In Algebra, Geometry and Mathematical Physics. Springer Proceedings in Mathematics and Statistics. Germany: Springer - Verlag, 2014. p. 375-385. ISBN: 978-3-642-55360-8.
Detail

POHANKA, M.; RAUDENSKÝ, M.; HWANG, J.; YOU, J.; LEE, S. Water Temperature Effect on Cooling Intensity for high Pressure Descaling Nozzles. London, UK: IOM Communications Ltd, 2014. p. 71-74.
Detail

HOLUB, M.; HADAŠ, Z.; BLECHA, P.; VETIŠKA, J.; SINGULE, V. ENERGY ANALYSIS OF ENERGY HARVESTING FROM MACHINE TOOL VIBRATIONS. MM Science Journal, 2014, vol. 2014, no. March, p. 462-465. ISSN: 1805-0476.
Detail

ZAREMBA, M.; MALÝ, M.; JEDELSKÝ, J.; JÍCHA, M. Comparison of Twin-fluid Atomizers Using a Phase Doppler Analyser. In The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2014. AIP conference proceedings. Liptovský Ján, Slovakia: Faculty of Mechanical Engineering University of Žilina, 2014. p. 275-278. ISBN: 978-80-554-0855-2. ISSN: 0094-243X.
Detail

JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P.; MARTINEC, J.; STEHLÍK, P. Effective abatement of VOC and CO from acrylic acid and related production waste gas by catalytic oxidation. Clean Technologies and Environmental Policy, 2014, vol. 16, no. 7, p. 1329-1338. ISSN: 1618-954X.
Detail

WOLFF, J.; NARRA, N.; ANTALAINEN, A.; VALÁŠEK, J.; KAISER, J.; SÁNDOR, G.; MARCIÁN, P. Finite element analysis of bone loss around failing implants. Materials and design, 2014, vol. 61, no. 22, p. 177-184. ISSN: 0261-3069.
Detail

RAUDENSKÝ, M.; ASTROUSKI, I. Heat Transfer Inside of Polymeric Hollow Fiber. Marseille: HTFFM-V, 2014. p. 150-150.
Detail

NOVOTNÝ, P.; MARŠÁLEK, O.; ZUBÍK, M.; DRÁPAL, L. Analysis of Slide Bearing Computational Models Considering Elastic Deformations and Rough Surfaces. In Engineering Mechanics 2014. 1. Brno University of Technology, 2014. p. 444-447. ISBN: 978-80-214-4871-1.
Detail

ŠOMPLÁK, R.; PAVLAS, M.; KROPÁČ, J.; PUTNA, O.; PROCHÁZKA, V. Logistic model-based tool for policy-making towards sustainable waste management. Clean Technologies and Environmental Policy, 2014, vol. 16, no. 10098, p. 1275-1286. ISSN: 1618-954X.
Detail

KUČERA, P.; PÍŠTĚK, V. A Computational Model of Powertrain Components in Simulink. In Engineering Mechanics 2014. Engineering Mechanics .... 1. Brno University of Technology, 2014. p. 344-347. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
Detail

KOTEK, L.; BABINEC, F. Kritéria přijatelnosti rizik závažné havárie - diskuze možných přístupů. In Týden výzkumu a inovací pro praxi 2014. Praha: České ekologické manažerské centrum, 2014. s. 1171-1176. ISBN: 978-80-85990-25-6.
Detail

MARCIÁN, P.; BORÁK, L.; NARRA, N.; SKALKA, P.; KAISER, J.; WOLFF, J. An Algorithm for Computational Simulation of Mandible Bone Modeling and Remodeling Around Dental Implants. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. p. 388-391. ISBN: 978-80-214-4871-1.
Detail

PRÁŠILOVÁ, E.; FLORIAN, Z.; MARCIÁN, P. Finite Element Analysis of Compression of Lumbar Spine with Dynamic Implant. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. p. 512-515. ISBN: 978-80-214-4871-1.
Detail

ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Localization Problem of Coupled Ductile Failure Models Compared to Uncoupled Ones. In Engineering Mechanics 2014. Svratka: Brno University of Technology, 2014. p. 632-635. ISBN: 978-80-214-4871-1.
Detail

BŘEZINA, T.; BŘEZINA, L.; MAREK, J.; HADAŠ, Z.; VETIŠKA, J. SIMULATION ASSESSMENT OF SUPPRESSION OF MACHINE TOOL VIBRATIONS. In Engineering mechanics 2014. 1. 2014. p. 104-107. ISBN: 978-80-214-4871-1.
Detail

KRACÍK, P.; COPEK, T.; POSPÍŠIL, J. Effect of Tube Pitch on Heat Transfer in Sprinkled Tube Bundle. Proceedings of Abstracts. 1. Brno: Brno University of Technology, 2014. p. 48-48. ISBN: 978-80-214-4931-2.
Detail

MOSKALÍK, J.; ŠNAJDÁREK, L.; ŠTELCL, O. USAGE OF THERMOGRAVIMETRIC ANALYSIS FOR ENERGETIC. Proceedings of abstract ERIN 2014. 1. Brno: Brno University of Technology, 2014. p. 63-63. ISBN: 978-80-214-4931-2.
Detail

HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; MAGADOUX, E.; CODE, F. Spray Cooling Unit for Heat Treatment of Stainless Steel Sheets. Advanced Materials Research, 2014, vol. 936, no. 1, p. 1720-1724. ISSN: 1022-6680.
Detail

HORSKÝ, J.; KOTRBÁČEK, P. IN-LINE HEAT TREATMENT OF LONG PRODUCTS. In METAL 2014, 23rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: Tanger Ltd., 2014. p. 1-6. ISBN: 978-80-87294-54-3.
Detail

KILKOVSKÝ, B.; JEGLA, Z.; STEHLÍK, P. Possibilities of Intensifying Heat Transfer through Finned Surfaces in Heat Exchangers for High Temperature Applications. Applied Thermal Engineering, 2014, vol. 70, no. 2, p. 1283-1287. ISSN: 1359-4311.
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. Experimental study on the influence of oxygen content in the combustion air on the combustion characteristics. Energy, 2014, vol. 2014, no. 75, p. 116-126. ISSN: 0360-5442.
Detail

HRDINA, J.; VAŠÍK, P. Dual Numbers Approach in Multiaxis Machines Error Modeling. Journal of Applied Mathematics, 2014, vol. 2014, no. 1, p. 1-6. ISSN: 1110-757X.
Detail

STRECKER, Z.; ROUPEC, J.; KUBÍK, M.; FRIEDEL, D. Experimental evaluation of MR damper time response on modified Groundhook algorithm efficiency. In Engineering Mechanics 2014. 1st. 2014. p. 600-603. ISBN: 978-80-214-4871-1.
Detail

ZAHRADNÍK, R.; RAUDENSKÝ, M. IMPROVEMENT OF WORK ROLL SERVICE LIFE BY MICROSTRUCTURE SIMULATION. In METAL 2014, 23rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: Tanger Ltd., 2014. p. 1-6. ISBN: 978-80-87294-54-3.
Detail

RAUDENSKÝ, M.; CHABIČOVSKÝ, M.; HRABOVSKÝ, J. IMPACT OF OXIDE SCALE ON HEAT TREATMENT OF STEELS. In METAL 2014, 23rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: Tanger Ltd., 2014. p. 553-558. ISBN: 978-80-87294-54-3.
Detail

PANÁČEK, T.; KLAPKA, M.; NĚMEC, Z. Optimization of valve manifold timing sequence using differential evolution algorithm. In Engineering mechanics 2014, Book of full texts. 1. Prague: Institute of Termomechanics, Academy of Sciences of the Czech Republic, 2014. p. 468-471. ISBN: 978-80-214-4871-1.
Detail

PETRUŠKA, J.; NÁVRAT, T. Numerical modelling of straightening process. Metal Forming, 2014, vol. XXV, no. 1, p. 39-51. ISSN: 0867-2628.
Detail

MAZAL, P.; FIALA, J.; VLAŠIC, F.; KOLEGA, M.; LIŠKUTÍN, P. Mechanismus únavových procesů. All for Power, 2014, roč. 2014, č. 2, s. 146-147. ISSN: 1802-8535.
Detail

SVOBODA, P.; KOŠŤÁL, D.; KUŇÁK, J.; KŘUPKA, I. Study of grease behaviour in a starved Elastohydrodynamically lubricated contact. MM Science Journal, 2014, vol. 2014, no. June, p. 464-469. ISSN: 1805-0476.
Detail

MLKVIK, M.; ZAREMBA, M.; JEDELSKÝ, J.; WIGLEY, G. INVESTIGATION OF THE SPRAY GENERATED BY A Y-JET ATOMIZER. In proceedings of 20th international conference Engineering Mechanics 2014. Praha: AVCR, 2014. p. 404-407. ISBN: 978-80-214-4871-1.
Detail

PÍŠKA, M.; METELKOVÁ, J. ON THE COMPARISON OF CONTACT AND NON-CONTACT EVALUATIONS OF A MACHINED SURFACE. MM Science Journal, 2014, vol. 7, no. 6, p. 1-5. ISSN: 1805-0476.
Detail

KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Multibody Analysis of Turbocharger Rotor Dynamics. In Setkání uživatelů MSC.Software s.r.o. 2014. Brno: MSC.Software s.r.o., 2014. p. 66-73. ISBN: 978-80-260-6033-8.
Detail

BALÁŠ, M.; LISÝ, M.; SKÁLA, Z.; KUBÍČEK, J. REMOVAL OF TAR FROM SYNGAS USING GAS SCRUBBER. Proceedings of Abstracts. 1. Brno: Brno University of Technology, 2014. p. 13-13. ISBN: 978-80-214-4931-2.
Detail

HRNČÍŘOVÁ, M.; BRÁZDIL, M.; POSPÍŠIL, J. DETECTION OF PARTICULATE MATTER ON THE FLUE GAS OF BIOMASS BOILER. Proceedings of Abstracts. 1. Brno: Brno University of Technology, 2014. p. 32-32. ISBN: 978-80-214-4931-2.
Detail

LISÝ, M.; BALÁŠ, M.; SKÁLA, Z. OPERATING SPECIFICATIONS OF CATALYTIC CLEANING OF GAS FROM BIOMASS GASIFICATION. Proceedings of Abstracts. 1. Brno: Brno University of Technology, 2014. s. 56-56. ISBN: 978-80-214-4931-2.
Detail

ŠPILÁČEK, M.; ŠTELCL, O.; SKÁLA, Z. THE COMPARISON OF WOOD CHIPS AND COCOA SHELLS COMBUSTION. Proceedings of Abstracts. 1. Brno: Brno University of Technology, 2014. p. 84-84. ISBN: 978-80-214-4931-2.
Detail

MAZAL, P.; VLAŠIC, F.; BÁRTKOVÁ, D.; KOULA, V. STUDIUM VYSOKOCYKLOVÉHO CHOVÁNÍ Cr-Ni-Mo-V OCELI S VYUŽITÍM AKUSTICKÉ EMISE. All for Power, 2014, roč. 8, č. 2, s. 153-156. ISSN: 1802-8535.
Detail

PAČÍSKA, T.; TUREK, V.; JEGLA, Z.; KILKOVSKÝ, B. Suitability of some commonly available software for unconventional condenser analysis. Applied Thermal Engineering, 2014, vol. 70, no. 2, p. 1195-1201. ISSN: 1359-4311.
Detail

ZUBÍK, M.; NOVOTNÝ, P.; PROKOP, A.; JANOUŠEK, M. Virtual Powertrain – a Tool for NVH Improvement. In Setkání uživatelů MSC.SOFTWARE 2014. 1. MSC.Software s.r.o., 2014. p. 95-100. ISBN: 978-80-260-6033-8.
Detail

SKRYJA, P.; BĚLOHRADSKÝ, P. Dual oil-gas burner. In Joint Meeting - Franch and Italian Section IFRF and The Combustion Institute. Napoli: Associazione Sezione Italiana del Combustion Institut, 2014. p. 64-64. ISBN: 978-88-88104-16-4.
Detail

ČÍŽEK, J.; MATĚJKOVÁ, M.; KAY, C.; KARTHIKEYAN, J.; KURODA, S.; KOVÁŘÍK, O.; SIEGL, J.; KHOR, K.; DLOUHÝ, I. Influence of Cold, Warm and Plasma Sprayed Layers on High-Cycle Fatigue Properties of Steel Specimens. In International Thermal Spray Conference 2014 Proceedings. Barcelona, Španělsko: DVS Media GmbH, 2014. p. 577-581. ISBN: 978-3-87155-574-9.
Detail

ČÍŽEK, J.; MAN, O.; DLOUHÝ, I. Influence of Cold-Sprayed Al/Ti Deposition on High-temperature Oxidation and Mechanical Properties Deterioration of Ti-Al-Nb Intermetallic Substrates. In International Thermal Spray Conference 2014 Proceedings. Barcelona, Španělsko: DVS Media GmbH, 2014. p. 903-907. ISBN: 978-3-87155-574-9.
Detail

MORAVČÍK, I.; BREZNIČAN, M. Simulácia kaliaceho procesu ložiskových krúžkov z ocele 100Cr6. In SEMDOK 2014. 2014. s. 162-165. ISBN: 978-80-554-0832-3.
Detail

ŠEBEK, F.; HŮLKA, J.; KUBÍK, P.; PETRUŠKA, J. On the Proportionality of Damage Rule in Finite Element Simulations of the Ductile Failure. In Modern Technologies for Engineering, Applied Mechanics and Material Science. Advanced Materials Research. 2014. p. 189-193. ISBN: 9783038351580. ISSN: 1022-6680.
Detail

ŠOMPLÁK, R.; PAVLAS, M. Potenciál výroby energie z odpadů v případě zákazu skládkování. Waste forum, 2014, roč. 2014, č. 2, s. 95-104. ISSN: 1804-0195.
Detail

TOUŠ, M.; MÁŠA, V.; PAVLAS, M.; AVRAMOV, V. Improving the enegy management of a building complex through utility system modelling. In 24th European Symposium on Computer Aided Process Engineering (ESCAPE). Computer Aided Chemical Engineering. Netherlands: Elsevier, 2014. p. 445-450. ISBN: 978-0-444-63443-6. ISSN: 1570-7946.
Detail

ZELENÝ, M.; ŠOB, M. Ab initio study of low-dimensional Fe-Si nanostructures. Atomic structure of nanosystems from first-principles simulations and microscopy experiments, Physics Boat 2014. Helsinki: Aalto University School of Science, 2014. p. 72-72.
Detail

ZELENÝ, M.; SOZINOV, A.; BJÖRKMAN, T.; STRAKA, L.; NIEMINEN, R. First-principles study of tetragonal deformation in Co- and Cu-doped Ni-Mn-Ga alloys. The Czech-Japanese Workshop on High-Temperature Intermetallics. Brno: Ústav fyziky materiálů Akademie věd ČR, 2014. p. 18-18.
Detail

ZELENÝ, M.; YIN, X.; MI, X. Effect of Fe and Cu doping on properties of TiNi Alloys. Book of Abstract: DPG Spring Meeting 2014. Bad Honnef: Deutsche Physikalische Gesellschaft e.V., 2014. p. MM 37.2 (MM 37.2 p.)
Detail

ZELENÝ, M.; SOZINOV, A.; BJÖRKMAN, T.; STRAKA, L.; NIEMINEN, R. Ab initio study of Co- and Cu-doped Ni-Mn-Ga alloys. From Electrons to Phase Transitions. Vienna: ViCoM, 2014. p. 35-35.
Detail

BULEJKO, P.; SVĚRÁK, T. Non-sintered porous barriers based on granular materials and inorganic binders. 13th International Conference on Inorganic Membranes, July 6-9, 2014, Brisbane, Australia, Book of Abstracts. 2014.
Detail

HÁJEK, J.; JEGLA, Z.; VONDÁL, J. CFD analysis of tube circumference heat flux variation in radiant section of fired heater. In Third International Conference on Computational Methods for Thermal Problems. ThermaComp proceedings. Napoli, Italy: Giannini Editore, 2014. p. 237-240. ISBN: 978-88-7431-727-1. ISSN: 2305-5995.
Detail

JUŘENA, T.; HÁJEK, J. Effects of convergence criteria on mass and energy balance of packed-bed combustion model. In Third International Conference on Computational Methods for Thermal Problems. ThermaComp proceedings. Napoli, Italy: Giannini Editore, 2014. p. 245-248. ISBN: 978-88-7431-727-1. ISSN: 2305-5995.
Detail

HÁJEK, J.; JEGLA, Z.; VONDÁL, J. Numerical Analysis of Radiant Section of Fired Heater Focused on the Effect of Wall-Tube Distance. In 24th European Symposium on Computer Aided Process Engineering (ESCAPE). Computer Aided Chemical Engineering. Netherlands: Elsevier, 2014. p. 331-336. ISBN: 978-963-9970-48-9. ISSN: 1570-7946.
Detail

PÍŠTĚK, V.; MAUDER, T.; KLIMEŠ, L. Identification of rheological model parameters by means of nonlinear optimization in GAMS. In Proceedings of 20th International Conference on Soft Computing MENDEL 2014. Brno: Brno University of Technology, 2014. p. 347-352. ISBN: 978-80-214-4984-8.
Detail

KLIMEŠ, L.; ŠTĚTINA, J. Challenges in numerical modelling of continuous steel casting - very fast GPU dynamic solidification model and its use in continuous casting control. In Proceedings of the 8th European Continuous Casting Conference ECCC 2014. Leoben, Austria: Austrian Society for Metallurgy and Materials (ASMET), 2014. p. 266-275. ISBN: 978-3-200-03664-2.
Detail

KOTOUL, M. Viktor Kaplan und sein in Brünn geschaffenes Werk. WASSERWIRTSCHAFT, 2014, roč. 104, č. 6, s. 23-25. ISSN: 0043-0978.
Detail

ŠTĚTINA, J.; MAUDER, T.; KLIMEŠ, L.; MASARIK, M. Operational experiences with the optimization of secondary cooling. In Proceedings of the 8th European Continuous Casting Conference ECCC 2014. Leoben, Austria: Austrian Society for Metallurgy and Materials (ASMET), 2014. p. 1181-1190. ISBN: 978-3-200-03664-2.
Detail

POKORNÝ, J.; FIŠER, J.; JÍCHA, M. Virtual Testing Stand for evaluation of car cabin indoor environment. ADVANCES IN ENGINEERING SOFTWARE, 2014, vol. 2014, no. 76, p. 48-55. ISSN: 0965-9978.
Detail

ŠLAPAL, J. On a co-universal arrow in the construct of n-ary hyperalgebras. Miskolc Mathematical Notes, 2015, vol. 2015(16), no. 1, p. 507-516. ISSN: 1787-2405.
Detail

NEKVASIL, R.; LOŠÁK, P.; LUKÁČ, P. ANALYSIS OF DAMAGE CONNECTION PIPING. Engineering Mechanics .... Brno: Brno University of Technology, 2014. p. 428-431. ISSN: 1805-8248.
Detail

JAN, V.; PÁLENÍKOVÁ, L.; ČUPERA, J.; ČÍŽEK, J. Formation of Intermetallic Phases in Fe-Al Binary Cold Spray Thick Deposit. In International Thermal Spray Conference 2014 Proceedings. Barcelona, Španělsko: DVS Media GmbH, 2014. p. 908-912. ISBN: 978-3-87155-574-9.
Detail

BORÁK, L.; MARCIÁN, P. Beams on Elastic Foundation Using Modified Bettis Theorem. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2014, vol. 88, no. 2014, p. 17-24. ISSN: 0020-7403.
Detail

HRABEC, D.; POPELA, P.; ROUPEC, J.; JINDRA, P.; HAUGEN, K.; NOVOTNÝ, J.; OLSTAD, A. Hybrid Algorithm for Wait-and-see Network Design Problem. Mendel Journal series, 2014, vol. 2014, no. 1, p. 97-104. ISSN: 1803-3814.
Detail

RUDOLF, P.; ŠTEFAN, D.; POCHYLÝ, F. Dynamics of swirling flows in industrial applications. In Engineering Mechanics 2014: Book of Full Texts. Engineering Mechanics .... Prague: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, DOLEJSKOVA 5, PRAGUE 8, 182 00, CZECH REPUBLIC, 2014. p. 38-41. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
Detail

VONDÁL, J.; VAN DER STEEN, M.; TUMMERS, M. Tracking of Impiging Jet Flame. In ENGINEERING MECHANICS 2014. Engineering Mechanics .... 2014. p. 692-695. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
Detail

KNOBLOCH, J.; HOLUB, M.; KOLOUCH, M. LASER TRACKER MEASUREMENT FOR PREDICTION OF WORKPIECE GEOMETRIC ACCURACY. In Engineering mechanics 2014. Engineering Mechanics .... 1. Svratka: Institute of Solid Mechanics, Mechatronics and Biomechanics, 2014. p. 296-300. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
Detail

HORSKÝ, J.; HRABOVSKÝ, J.; RAUDENSKÝ, M. IMPACT OF THE OXIDE SCALE ON SPRAY COOLING INTENSITY. In Heat treatment of steel is attended by oxide scales growth with various physical properties. The most common and most dominant impact of the oxide scale layers is on the surface quality and mechanical properties of steel. This paper is focused on study o. Orlando, Florida: HEFAT, 2014. p. 1480-1485. ISBN: 978-1-77592-068-7.
Detail

BÁRTKOVÁ, D.; VLAŠIC, F.; MAZAL, P. ACOUSTIC EMISSION RESPONSE DURING HIGH-CYCLE FATIGUE LOADING OF INCONEL 713LC. In Metal 2014: 23rd International Conference on Metallurgy and Materials. 2014. Ostrava: Tanger Ltd., 2014. p. 1206-1211. ISBN: 978-80-87294-52-9.
Detail

KUČERA, P.; PÍŠTĚK, V. SIMULINK BLOCK LIBRARY FOR ASSEMBLING A VEHICLE. Perners' Contacts, 2014, vol. IX, no. 2, p. 38-47. ISSN: 1801-674X.
Detail

TSENG, A.; RAUDENSKÝ, M. Recent trends of technology transfer in US universities with comparison to those following Bayh-Dole Act. International Journal of Technology Transfer and Commercialisation, 2014, vol. 12, no. 1/2/3, p. 139-156. ISSN: 1470-6075.
Detail

NÁVRAT, T.; FLORIAN, Z.; KOČIŠ, J.; VOSYNEK, P. Biomechanical testing of spinal segment fixed by ArcoFix system. In ENGINEERING MECHANICS 2014. Brno: BUT, 2014. p. 424-427. ISBN: 978-80-214-4871-1.
Detail

JEDELSKÝ, J.; JÍCHA, M. Energy considerations in spraying process of a spill-return pressure-swirl atomizer. APPLIED ENERGY, 2014, vol. 132, no. 1, p. 485-495. ISSN: 0306-2619.
Detail

ĎURDINA, L.; JEDELSKÝ, J.; JÍCHA, M. Investigation and comparison of spray characteristics of pressure-swirl atomizers for a small-sized aircraft turbine engine. International journal of heat and mass transfer, 2014, vol. 78, no. 11, p. 892-900. ISSN: 0017-9310.
Detail

TUREK, V.; BÉBAR, L.; JEGLA, Z. Simplified Pressure Drop and Flow Distribution Modelling in Radial Catalytic Converters. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 853-858. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

ZIKMUND, T.; BRADA, M.; ZATOČILOVÁ, A.; PETRILAK, M.; KAISER, J. Kontrola rozměrů redukce objektivu a kamery pomocí rentgenové počítačové tomografie. Jemná mechanika a optika, 2014, roč. 59, č. 6-7, s. 186-189. ISSN: 0447-6441.
Detail

NÁVRAT, T.; PETRUŠKA, J. Eulerian Description of Rail Straightening Process. In Advanced Development in Automation, Materials and Manufacturing. Applied Mechanics and Materials. Trans Tech Publications, 2014. p. 213-217. ISBN: 9783038352259. ISSN: 1660-9336.
Detail

VOSYNEK, P.; VLK, M.; NÁVRAT, T. Review of Pressurized Vessel Structural Design – An Assessment of Total Life. In Advanced Development in Automation, Materials and Manufacturing. Applied Mechanics and Materials. Trans Tech Publications, 2014. p. 218-222. ISBN: 9783038352259. ISSN: 1660-9336.
Detail

MAUDER, T.; ŠTĚTINA, J. OPTIMIZATION OF THE SECONDARY COOLING IN A CONTINUOUS CASTING PROCESS WITH DIFFERENT OPTIMIZATION OF THE SECONDARY COOLING IN A CONTINUOUS CASTING PROCESS WITH DIFFERENT SLAB CROSS-SECTIONS. Materiali in tehnologije, 2014, vol. 48, no. 4, p. 521-524. ISSN: 1580-2949.
Detail

SALAMI, N.; SKÁLA, Z. USING OF AIR-STEAM AS GASIFYING AGENT IN FLUIDIZED BED GASIFER TO IMPROVE THE SYNGAS QUALITY. ERIN 2014 - Proceedings of Abstract. 1. Brno: VUT v Brně, 2014. p. 80-80. ISBN: 978-80-214-4931-2.
Detail

ŠEBEK, F.; PETRUŠKA, J.; NÁVRAT, T. Euler-type algorithm applied to leveling process analysis. Engineering Mechanics, 2014, vol. 21, no. 3, p. 185-191. ISSN: 1802-1484.
Detail

POPELA, P.; NOVOTNÝ, J.; ROUPEC, J.; HRABEC, D.; OLSTAD, A. Two-Stage Stochastic Programming for Engineering Problems. Engineering Mechanics, 2014, vol. 21, no. 5, p. 335-353. ISSN: 1802-1484.
Detail

MÁŠA, V.; KUBA, P.; PETRILÁK, D.; LOKAJ, J. Decrease in Consumption of Compressed Air in Dry Ice Blasting Machine. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 805-810. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

KADDOUR, M. alternative motors in aviation. AVIATION, 2014, vol. 2014, no. 4, p. 174-177. ISSN: 1648-7788.
Detail

KADDOUR, M. properties of alternative motors in aviation. Letecký zpravodaj, 2014, vol. 2014, no. 2, p. 18-23. ISSN: 1211-877X.
Detail

SKRYJA, P.; BĚLOHRADSKÝ, P. The Influence of Bound Nitrogen Content in the Gaseous Fuel on the Formation of NOx. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 1321-1326. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

JEGLA, Z.; HÁJEK, J.; VONDÁL, J. Numerical Analysis of Heat Transfer in Radiant Section of Fired Heater with Realistic Imperfect Geometry of Tube Coil. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 889-894. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

HÁJEK, Z.; JEGLA, Z.; PAČÍSKA, T. Actual results from research and development of modern small MSF sea water desalination equipment. Book of Abstracts of the 21st International Congress of Chemical and Process Engineering CHISA 2014. Prague, Czech Republic: Czech Society of Chemical Engineering, 2014. p. P5.167 (P5.167 p.)ISBN: 978-80-02-02555-9.
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. Experimental Study of Oxygen-enhanced Combustion on NOx emission, In-flame Temperatures and Heat Flux Distribution. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 787-792. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

TOUŠ, M.; PAVLAS, M.; STEHLÍK, P. Waste-to-energy plant operation planning based on stochastic simulation. In Proceedings of the 17th CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION PRES 2014. 2014. p. 673-678. ISBN: 978-88-95608-30-3.
Detail

JECHA, D.; BRUMMER, V.; MARTINEC, J.; SKRYJA, P.; STEHLÍK, P. Optimal Design and Modernization of Small Incineration Unit for VOC Abatement. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 739-774. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

DOUPOVEC, M.; KUREŠ, M. Some geometric constructions on Frobenius Weil bundles. DIFFERENTIAL GEOMETRY AND ITS APPLICATIONS, 2014, vol. 35, no. S, p. 143-149. ISSN: 0926-2245.
Detail

HOUDKOVÁ, L.; ČMARADOVÁ, M.; STRNADEL, P.; CHLÁDKOVÁ, H.; BORÁŇ, J. Tertiary Treatment of Wastewater by Phosphorus Precipitation – Pilot Scale Test of Flotation Utilization for Suspension Separation. In Proceedings of the 17th CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 1243-1248. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. The influence of oxygen-enhanced combustion methods on NOx emissions, in-flame temperatures and heat flux distribution. Proceedings of 35th International Symposium on Combustion. San Francisco: 2014. p. 1 (1 s.).
Detail

KUBA, P.; BOBÁK, P.; MÁŠA, V.; VONDRA, M. Acquisition of Operational Data in Industrial Laundry Facilities. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 1645-1650. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

SLIWKOVÁ, P.; PÍŠKA, M. On the cutting performance of coated HSS taps when machining of austenitic steel. In Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU Ostrava. 1. Ostrava: VŠB - TU Ostrava, 2014. p. 26-34. ISBN: 978-80-248-3518-1.
Detail

PÍŠKA, M.; OHNIŠŤOVÁ, P. Pětiosé frézování s polynomiální trajektorií. In Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU Ostrava. 1. Ostrava: VŠB - TU Ostrava, 2014. s. 15-27. ISBN: 978-80-248-3518-1.
Detail

VYKLICKÝ, O.; HAVLÍČEK, P.; SVOBODA, M.; STRÁNSKÝ, K. Výrazné zpevnění Hadfieldovy oceli výbuchem doložené měřením. Slévárenství, 2014, roč. LXII, č. 7-8, s. 220-222. ISSN: 0037-6825.
Detail

POLZER, A. Moderní CNC frézování s kompenzací deformace řezného nástroje. In Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU Ostrava. Ostrava: Vysoká škola báňská-Technická univerzita Ostrava, Fakulta strojní, 2014. s. 1-10. ISBN: 978-80-248-3518-1.
Detail

LÉTAL, T. Software Tool for Creating and Modifying Parametric Shell and Tube Heat Exchanger Geometry. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 1345-1350. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

KUREŠ, M. On fixed point subalgebras of some local algebras over a field. Buletinul Academiei de Stiinte a Republicii Moldova. Matematica, 2015, vol. 77, no. 1, p. 3-12. ISSN: 1024-7696.
Detail

JANÁK, L.; HADAŠ, Z. Power Management Electronics for Thermoelectric Energy Harvesting Systems. ERIN 2014. Brno: Brno University of Technology, 2014. p. 34-34. ISBN: 978-80-214-4931-2.
Detail

ČÍŽEK, J.; DLOUHÝ, I.; ŠIŠKA, F.; KHOR, K. Modification of Plasma Sprayed TiO2 Coatings Characteristics via Controlling the In-flight Temperature and Velocity of the Powder Particles. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2014, vol. 23, no. 8, p. 1339-1349. ISSN: 1059-9630.
Detail

ZAREMBA, M.; MLKVIK, M.; MALÝ, M.; JEDELSKÝ, J.; JÍCHA, M. Quantitative and Qualitative Comparison of Internally Mixed Twin-Fluid Atomizers. In ILASS 2014, Proceedings. Bremen, Germany: 2014. p. 1-11. ISBN: 978-3-00-047070-7.
Detail

GALAS, R.; OMASTA, M. The Effect of Friction Modifier on the Wheel-Rail Contact. In 55th International Conference of Machine Design Departments. 2014. p. 123-128. ISBN: 978-80-01-05542-7.
Detail

BRUMMER, V.; SKRYJA, P.; JUŘENA, T.; HLAVÁČEK, V.; STEHLÍK, P. Suitable Technological Conditions for Enzymatic Hydrolysis of Waste Paper by Novozymes Enzymes NS50013 and NS50010. APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY, 2014, vol. 174, no. 4, p. 1299-1308. ISSN: 0273-2289.
Detail

NEČAS, D.; VRBKA, M.; YARIMITSU, S.; NAKASHIMA, K.; SAWAE, Y.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Frictional Properties of PVA Hydrogel. In 55th International Conference of Machine Design Departments. 2014. p. 147-152. ISBN: 978-80-01-05542-7.
Detail

POSPÍŠIL, J.; JÍCHA, M. Modelling of Traffic Pollutant Dispersion Released from Singel Line Source in Local Urban Areas. Varna, Bulgaria: 2014. p. 407-410.
Detail

BUZÍK, J.; NOVÁČEK, F.; LOŠÁK, P. CFD and FEA Boiler Collector Analysis. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 847-852. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

KRACÍK, P.; ZACHAR, M.; COPEK, T.; POSPÍŠIL, J. Teplotní pole na skrápěném trubkovém svazku. In Sborník přednášek z konference Energie z biomasy XV. 1. Lednice: VUT v Brně, 2014. s. 75-81. ISBN: 978-80-214-5016-5.
Detail

RIPEL, T.; KREJSA, J.; HRBÁČEK, J.; ČIŽMÁŘ, I. Active Elbow Orthosis. International Journal of Advanced Robotic Systems, 2014, vol. 11, no. 9, p. 1-10. ISSN: 1729-8806.
Detail

MOSKALÍK, J.; ŠNAJDÁREK, L.; POSPÍŠIL, J. Měření teploty tavení popelovin pomocí termo-gravimetrické analýzy. In Sborník přednášek z konference Energie z biomasy XV. 1. Lednice: VUT v Brně, 2014. s. 100-105. ISBN: 978-80-214-5016-5.
Detail

BLECHA, P. Snižování energetické náročnosti obráběcích strojů. In Konstrukce CNC obráběcích strojů III. MM speciál. Praha: MM publishing, s.r.o., 2014. s. 582-590. ISBN: 978-80-260-6780-1.
Detail

BLECHA, P. Virtuální prototypování obráběcích strojů. In Konstrukce CNC obráběcích strojů III. MM speciál. Praha: MM publishing, s.r.o., 2014. s. 630-638. ISBN: 978-80-260-6780-1.
Detail

ASTROUSKI, I.; RAUDENSKÝ, M. Polymeric Hollow Fiber Heat Exchangers: Liquid-to-Gas Application. 2014.
Detail

BALÁŠ, M.; LISÝ, M.; SKÁLA, Z.; POSPÍŠIL, J. Wet scrubber for cleaning of syngas from biomass gasification. In Advances in Enviromental Sciences, Development and Chemistry. Santorini: 2014. p. 195-201. ISBN: 978-1-61804-239-2.
Detail

BALÁŠ, M.; LISÝ, M.; SKÁLA, Z. Spalovny odpadu – odpad jako palivo. TZB-info, 2014, roč. 2014, č. 43, s. 1-8. ISSN: 1801-4399.
Detail

BULEJKO, P.; SVĚRÁK, T.; KEJÍK, P.; KRIŠTOF, O.; SIKOROVÁ, K. The potential use of geopolymer-based materials in filtration applications. 21st International Congress of Chemical Engineering CHISA 2014 and 17th Conference PRES 2014, 23 - 27 August 2014, Praha, Czech Republic, Czech Society of Chemical Engineering. 2014. ISBN: 978-80-02-02555-9.
Detail

POKORNÝ, J.; FIŠER, J.; JÍCHA, M. Newton Manikin Software for Evaluation of Thermal Comfort using ISO 14505-2. In Proceedings of Ambience14&10i3m. Proceedings of Ambience, Scientific Conference for Smart Textiles. Tampere, Finlad: Tampere University of Technology, 2014. p. 50-55. ISBN: 978-952-15-3269-6.
Detail

KUBÍK, M.; MAZŮREK, I. Design of semi-active magnetorhelogical valve. In The Latest Methods of Construction Design. Springer International Publishing, 2016. p. 51-56. ISBN: 978-3-319-22761-0.
Detail

NOVOTNÝ, P.; MARŠÁLEK, O.; KNOTEK, J.; DRÁPAL, L. Computational approaches for slide bearing modelling. In Proceedings of the 45th International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engine. I. Kostelec nad Černými lesy: CZECH UNIVERSITY OF LIFE SCIENCE PRAGUE, 2014. p. 25-32. ISBN: 978-80-7375-801-1.
Detail

HRABOVSKÝ, J.; KLÍMA, J.; KOMÁREK, M.; HORSKÝ, J. Experimentální a výpočetní stanovení přestupu tepla u dvouvstupé turbínové skříně. In TURBOSTROJE 2014. Plzeň: Klub ASI –Turbostroje - Plzeň a Doosan Škoda Power s.r.o., 2014. s. 1-13. ISBN: 978-80-260-6447-3.
Detail

AUGSTE, J.; HOLUB, M.; KNOFLÍČEK, R. Tools for Visualization of Active Power and Energy at Machine Tools. In Mechatronic systems and materials. Opole, Poland: Oficyna Wydaw. Politechniki Opolskiej, 2014. p. 1-5. ISBN: 978-83-64056-58-1.
Detail

KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Modern approach to turbocharger rotordynamic analysis. In Proceedings of the 45th International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engine. I. Kostelec nad Černými lesy: CZECH UNIVERSITY OF LIFE SCIENCE PRAGUE, 2014. p. 33-40. ISBN: 978-80-7375-801-1.
Detail

CHOUDHURY, D.; CHING, H.A.; MAMAT, A.B.; ČÍŽEK, J.; ABU OSMAN, N.A.; VRBKA, M.; HARTL, M.; KŘUPKA, I. Fabrication and characterization of DLC coated microdimples on hip prosthesis heads. Journal of biomedical materials research. Part B, Applied biomaterials (Print), 2015, vol. 103, no. 5, p. 1002-1012. ISSN: 1552-4973.
Detail

BALÁŠ, M.; LISÝ, M.; KUBÍČEK, J.; POSPÍŠIL, J. Syngas Cleaning by Wet Scrubber. WSEAS Transaction on Heat and Mass Transfer, 2014, vol. 9, no. 16, p. 195-204. ISSN: 1790-5044.
Detail

HARTL, M.; KŘUPKA, I.; OMASTA, M.; ŠPERKA, P. Recent Advances and Problems in Lubricated Hertzian Contacts. In Engineering Mechanics 2014. Svratka: Brno University of Technology, 2014. p. 34-38. ISBN: 978-80-214-4871-1.
Detail

KOUTNÝ, D.; VRÁNA, R.; PALOUŠEK, D. Dimensional accuracy of single beams of AlSi10Mg alloy and 316L stainless steel manufactured by SLM. In 5th International Conference on Additive Technologies iCAT2014. Ljubljana: Interesansa, 2014. p. 142-147. ISBN: 978-961-281-579-0.
Detail

MAZAL, P.; VLAŠIC, F.; BÁRTKOVÁ, D. Application of Acoustic Emission for Identification of Differences in Fatigue Damage of Selected Materials for Power Plants. Key Engineering Materials (print), 2014, vol. 627, no. 313, p. 313-316. ISSN: 1013-9826.
Detail

VLAŠIC, F.; BÁRTKOVÁ, D.; MAZAL, P. Identification of Acoustic Emission Sources in Early Stages of Fatigue Process of Inconel 713LC. In 31st Conference of the European Working Group on Acoustic Emission (EWGAE). 2014. Dresden, Germany: DGZfP and EWGAE, 2014. p. P3-1 (P3-7 p.)ISBN: 978-3-940283-63-4.
Detail

VLAŠIC, F.; BÁRTKOVÁ, D.; MAZAL, P. Assessment of Early Fatigue of Power Plant Material Using Acoustic Emission Method. In XIth European Conference on NDT - Conference proceedings. Praha: VUT v Brně, 2014. p. P04.09-1 (P04.09-8 p.)ISBN: 978-80-214-5018-9.
Detail

NOHÁL, L.; KOMENDA, L.; MAZAL, P. Přínos metody akustické emise pro zkoušky kontaktní únavy. In Defektoskopie 2014. 2014. Brno: VUT v Brně, ČNDT, 2014. s. 83-87. ISBN: 978-80-214-5035-6.
Detail

NOHÁL, L.; KOMENDA, L.; DVOŘÁČEK, J.; MAZAL, P. Importance of Acoustic Emission Method in Evaluation of Durability of Rolling Contact. In XIth European conference on NDT. 2014. Brno: VUT v Brně, 2014. p. 1-5. ISBN: 978-80-214-5018-9.
Detail

TOMAN, J.; SINGULE, V.; HADAŠ, Z. Model of Aircraft Actuator with BLAC Motor. In 16th INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE AND EXPOSITION (PEMC 2014). 1. Antalya: Gazi University, Turkey, 2014. p. 278-283. ISBN: 978-1-4799-2060-0.
Detail

JANÁK, L.; ANČÍK, Z.; VETIŠKA, J.; HADAŠ, Z. Thermoelectric Generator Based on MEMS Module as an Electric Power Backup in Aerospace Applications. Materials Today: Proceedings, 2015, vol. 2, no. 2, p. 865-870. ISSN: 2214-7853.
Detail

KOULA, V.; VLAŠIC, F.; DRÁB, M.; SLUNEČKO, T.; VOLÁK, J. Utilization of Non-Destructive Methods for Monitoring Fatigue Crack Growth in Power Plant Material. In XIth European Conference on NDT - Conference proceedings. Praha: VUT v Brně, 2014. p. AEI-1 (AEI-11 p.)ISBN: 978-80-214-5018-9.
Detail

BROUKAL, J.; HÁJEK, J. Experimental analysis of spatial evolution of mean droplet diameters in effervescent sprays. In 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction. Chemical Engineering Transactions. Milano: AIDIC Servizi S.r.l., 2014. p. 780-786. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

VLAŠIC, F.; BÁRTKOVÁ, D.; MAZAL, P. HODNOCENÍ RANÝCH STÁDIÍ ÚNAVOVÉHO POŠKOZOVÁNÍ VYUŽITÍM METODY AKUSTICKÉ EMISE V OBLASTI ENERGETICKÉHO PRŮMYSLU. In Defektoskopie 2014 - sborník příspěvků. 1. Praha: VUT v Brně, 2014. s. 147-154. ISBN: 978-80-214-5035-6.
Detail

PAVLAS, M. Waste Availability, Successful Regional Strategies and New WtE Projects Shaping – The Benefits and Application of The Optimization Tool NERUDA. In Thomé-Kozmiensky K.J, Thiel S. (Eds): Waste Management, Volume 4. Neuruppin, Deutschland: TK Verlag Karl Thomé-Kozmiensky, 2014. p. 139-150. ISBN: 978-3-944310-15-2.
Detail

VONDÁL, J.; HÁJEK, J. Numerical Flow Field Prediction Downstream of Axial Guide Vane Swirl Generator. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering Transactions. Milan, Italy: AIDIC Servizi S.r.l., 2014. p. 907-912. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
Detail

MARCIÁN, P.; BORÁK, L.; VALÁŠEK, J.; KAISER, J.; FLORIAN, Z.; WOLFF, J. Finite Element Analysis of Dental Implant Loading on Atrophic and Non-atrophic Cancellous and Cortical Mandibular Bone - a Feasibility Study. JOURNAL OF BIOMECHANICS, 2014, vol. 47, no. 16, p. 3830-3836. ISSN: 0021-9290.
Detail

STRECKER, Z.; ROUPEC, J.; MAZŮREK, I.; KLAPKA, M. Limiting factors of the response time of the magnetorheological damper. INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2015, vol. 47, no. 2, p. 541-550. ISSN: 1383-5416.
Detail

PÍŠTĚK, V.; MAUDER, T.; KLIMEŠ, L. Nonlinear optimization of generalized Kelvin-model parameters with the use of mathematical programming. In Proceeding of International Conference Transport Means 2014. Transport Means. "Technologija", Studentu St. 54, LT-51424 Kaunas: Kaunas University of Technology, K. Donelaičio st. 73, LT-44029 Kaunas, 2014. p. 277-280. ISBN: 9955-09-935-6. ISSN: 1822-296X.
Detail

BALÁŠ, M.; LISÝ, M.; ŠPILÁČEK, M.; SKÁLA, Z. Biomass Gasification and Microcogeneration Unit - EZOB Technology. World Academy of Science, Engineering and Technology, 2014, vol. 8, no. 10, p. 1381-1384. ISSN: 1307-6892.
Detail

BULEJKO, P.; SIKOROVÁ, K.; KEJÍK, P.; KRIŠTOF, O.; SVĚRÁK, T. Filtration Membranes Based on Secondary Materials: Preparation, Characterization, and Properties. 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. ISBN: 978-961-92518-7-4.
Detail

BROUKAL, J.; HÁJEK, J.; VONDÁL, J. An experimental study of effervescent sprays: axial evolution of mean drop diameter. In 26th European Conference on Liquid Atomization & Spray Systems. Bremen, Germany: 2014. p. 1-6. ISBN: 978-3-88722-744-9.
Detail

KUREŠ, M. Variété des points proches: od definice Weilova bandlu až po nahlédnutí do syntetické diferenciální geometrie. In Sborník příspěvků 34. konference o geometrii a grafice. České Budějovice: Jihočeská univerzita v Českých Budějovicích, 2014. s. 147-152. ISBN: 978-80-7394-470-4.
Detail

KUČERA, P.; PÍŠTĚK, V. Virtual prototype of a heavy duty off-road truck driveline in Simulink software. In Proceeding of International Conference Transport Means 2014. Transport Means. K. Donelaičio st. 73, LT-44029 Kaunas: Kaunas University of Technology, 2014. p. 5-8. ISSN: 1822-296X.
Detail

KOVÁŘ, J.; RUČKA, J. Some notes to the using of GA for pump scheduling in real-time regime. In 20th International Conference on Soft Computing, MENDEL 2014 (id 22122). Mendel Journal series. 2014. Brno, ČR: VUT, 2014. p. 415-420. ISBN: 978-80-214-4984-8. ISSN: 1803-3814.
Detail

FRÝZA, J.; OMASTA, M. The Experimental Determination of the Grease Amount to Effective Wear Reduction in the Wheel-Rail Contact. In Book of Proceedings of the 55th International Conference of Machine Design Departments. 2014. p. 117-122. ISBN: 978-80-01-05542-7.
Detail

ŠTĚTINA, J.; RAMÍK, P.; KATOLICKÝ, J. CONTROL ON SOFT REDUCTION OF CONTINUOUS CASTING SLAB BY THERMAL MODEL. LJUBLJANA: INŠTITUT ZA KOVINSKE MATERIALE IN TEHNOLOGIJE, 2014. p. 223-223. ISBN: 978-961-92518-7-4.
Detail

JONÁK, M.; KOTEK, L.; DRÁPAL, L.; PÍŠTĚK, V. Modelling of the fuel flow out of the injection nozzle in the application for increasing the efficiency of the diesel fuel injection process. In Proceeding of International Conference Transport Means 2014. Transport Means. "Technologija", Studentu St. 54, LT-51424 Kaunas: Kaunas University of Technology, K. Donelaičio st. 73, LT-44029 Kaunas, 2014. p. 173-176. ISBN: 9955-09-935-6. ISSN: 1822-296X.
Detail

LEŠTINSKÝ, P.; JECHA, D.; BRUMMER, V.; BÉBAR, L.; STEHLÍK, P. Removal of SO2 from flue gases using a new design of a Venturi scrubber. 2014.
Detail

KRACÍK, P.; ŠNAJDÁREK, L.; LISÝ, M.; BALÁŠ, M.; POSPÍŠIL, J. Correlation of Heat Transfer Coefficient at Sprinkled Tube Bundle. Program and Book of Abstracts. 1. Ljubljana, Slovenia: Institute of Metals and Technology, 2014. p. 127-127. ISBN: 978-961-92518-7-4.
Detail

KOVÁŘ, J.; RUČKA, J.; ANDRŠ, O. Simulation Modelling of Water-supply Network as Mechatronic System. In Proceedings of the 16th International Conference on Mechatronics –Mechatronika 2014. 1. Brno: VUT v Brně, 2014. p. 697-700. ISBN: 978-80-214-4817-9.
Detail

KOTEK, L.; MUKHAMETZIANOVA, L.; BLECHA, P. Zkušenosti s použitím samohodnocení bezpečnosti v průmyslu. Journal of Safety Research and Applications (JOSRA), 2014, roč. 2014, č. 3-4, s. 1-7. ISSN: 1803-3687.
Detail

KOTEK, L.; JONÁK, M.; DRÁPAL, L.; PÍŠTĚK, V. High-speed inspection and visualization of fuel injection in the large combustion chamber. In Proceeding of International Conference Transport Means 2014. Transport Means. Kaunas Univ Technol, Kaunas, LITHUANIA: KAUNAS UNIV TECHNOLOGY PRESS, K DONELAICIO 73, KAUNAS LT 3006, LITHUANIA, 2014. p. 59-62. ISBN: 9955-09-935-6. ISSN: 1822-296X.
Detail

KOTEK, L.; HOLUB, M.; VETIŠKA, J.; HADAŠ, Z.; BLECHA, P. Non-invasive displacement measurement of lightweight structures under dynamic excitations. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). American Society of Mechanical Engineers (ASME), 2015. p. 5-11. ISBN: 978-0-7918-4648-3.
Detail

KOTEK, L.; HOLUB, M.; VETIŠKA, J.; ŠUBRT, K.; HADAŠ, Z.; BLECHA, P. Comparison of Suitability of Tracking Marks for Optical Measurement of Displacement. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 489-493. ISBN: 978-80-214-4817-9.
Detail

KOTEK, L.; PÍŠTĚK, V.; JONÁK, M. Bivariate Process Capability Analysis of Fuel Injection Nozzles Production. WSEAS Journal Transactions on Environment and Development, 2014, vol. 2014, no. 10, p. 492-495. ISSN: 1790-5079.
Detail

PAVLÍK, J. STUDIE REALIZOVATELNOSTI PASTORKOVÉHO NÁHONU POJEZDU STŘECHY STADIONU. Brno: VYSOKÉ UČENÍ TECHNICKÉ V BRNĚ, 2014.
Detail

BŘEZINA, T. Mechatronika v konstrukci CNC obráběcích strojů. In Konstrukce CNC obráběcích strojů III. MM speciál. Praha: MM publishing, s.r.o., 2014. s. 598-614. ISBN: 978-80-260-6780-1.
Detail

KRACÍK, P.; COPEK, T.; ZACHAR, M.; POSPÍŠIL, J. Evaluation of the Effect of Tube Pitch and Surface Alterations on Temperature Field at Sprinkled Tube Bundle. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2015. p. 1-8. ISSN: 2100-014X.
Detail

MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P. Micro-lubrication of directionally oriented contact surfaces. In BALKANTRIB 2014 - 8th INTERNATIONAL CONFERENCE ON TRIBOLOGY. Sinaia, Romania: Petroleum-Gas University of Ploiesti Publishing House, 2014. p. 202-216. ISBN: 978-973-719-570-8.
Detail

RAFFAI, P.; NOVOTNÝ, P.; MARŠÁLEK, O. Numerical Calculation of Mechanical Losses of the Piston Ring Pack of Internal Combustion Engines. In BALKANTRIB 2014 - 8th INTERNATIONAL CONFERENCE ON TRIBOLOGY. Sinaia, Romania: Petroleum-Gas University of Ploiesti Publishing House, 2014. p. 734-747. ISBN: 978-973-719-570-8.
Detail

ZAREMBA, M.; MLKVIK, M.; MALÝ, M.; JEDELSKÝ, J.; JÍCHA, M. Evaluation of Steadiness and Drop Size Distribution in Sprays Generated by Different Twin-Fluid Atomizers. In EPJ Web of Conferences. EPJ Web of Conferences. Český Krumlov, Czech Republic: EDP Sciences, 2014. s. 757-762. ISSN: 2100-014X.
Detail

POKORNÝ, J.; JÍCHA, M. Implementace Fialova termofyziologického modelu tepelného komfortu v Matlabu. Simulace budov a techniky prostředí 8. národní konference s mezinárodní účastí. Praha: IBPSA-CZ, 2014. s. 65-69. ISBN: 978-80-260-7209-6.
Detail

PALOUŠEK, D.; OMASTA, M.; KOUTNÝ, D.; BEDNÁŘ, J.; DOKOUPIL, F.; KOUTECKÝ, T. Effect of matte coating on 3D optical measurement accuracy. OPTICAL MATERIALS, 2015, vol. 40, no. 1, p. 1-9. ISSN: 0925-3467.
Detail

ČÍŽEK, J.; MAN, O.; ROUPCOVÁ, P.; LOKE, K.; DLOUHÝ, I. Oxidation Performance of Cold Spray Ti-Al Barrier Coated gamma-TiAl Intermetallic Substrates. Surface and Coatings Technology, 2015, vol. 268, no. 4, p. 85-89. ISSN: 0257-8972.
Detail

HIMR, D., HABÁN, V. Damping of Self-Excited Pressure Pulsations in Petrodiesel Pipeline. In Applied Mechanics and Materials. Applied Mechanics and Materials. Švýcarsko: Trans Tech Publications, 2014. p. 375-282. ISBN: 978-3-03835-241-9. ISSN: 1662-7482.
Detail

HOLUB, M.; KNOBLOCH, J. Geometric accuracy of CNC machine tools. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 260-265. ISBN: 978-80-214-4817-9.
Detail

ŠTETINA, J.; BŘEZINA, T.; VETIŠKA, J.; HADAŠ, Z. Multibody Model of Heavy Machine Tool. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 266-270. ISBN: 978-80-214-4817-9.
Detail

HADAŠ, Z.; KŠICA, F. Model-based Design of Testing Electromagnetic Shaker with Flexible Beam. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 393-398. ISBN: 978-80-214-4817-9.
Detail

BŘEZINA, T.; BŘEZINA, L.; ŠTETINA, J.; MAREK, J. Design of Optimal Parameter Values of Mechatronic System with Flexible Bodies Using a Block Model. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. 2014: Brno University of Technology, 2014. p. 301-307. ISBN: 978-80-214-4817-9.
Detail

RUBEŠ, O.; SMILEK, J.; HADAŠ, Z. Development of Vibration Energy Harvester Fabricated by Rapid Prototyping Technology. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of Technology, 2014. p. 178-182. ISBN: 978-80-214-4817-9.
Detail

POKORNÝ, J.; FIŠER, J.; JÍCHA, M. Calibration of Virtual Testing Stand of the Car Cabin using climatic chamber tests. In EPJ Web of Conferences. EPJ Web of Conferences. EFM. EDP Sciences, 2015. p. 497-500. ISSN: 2100-014X.
Detail

HIMR, D., HABÁN, V. Evaluation of pump characteristic from measurement of fast deceleration. In EFM14 – Experimental Fluid Mechanics 2014. EPJ Web of Conferences. EPJ Web of Conferences. Liberec: EDP Sciences, 2014. p. 182-187. ISSN: 2100-014X.
Detail

KLIMEŠ, L.; CHARVÁT, P.; OSTRÝ, M.; ŠTĚTINA, J. Parallel heat transfer model of a panel with phase change material for thermal storage applications computed on graphics processing units. In ICMEM 2014. Advanced Materials Research. Švýcarsko: Trans Tech Publications, 2015. p. 118-123. ISBN: 978-3-03835-369-0. ISSN: 1022-6680.
Detail

SVÍDA, D.; BERAN, M.; BRADÁVKA, M. Research and Development of CNG Internal Combustion Engine for Transport and Industry Applications. In Proceedings of the 45th International Scientific Conference of the Czech and Slovak University Departments and Institutions Dealing with the Research of Internal Combustion Engine. I. Kostelec nad Černými lesy: CZECH UNIVERSITY OF LIFE SCIENCE PRAGUE, 2014. p. 33-40. ISBN: 978-80-7375-801-1.
Detail

PECH, O.; JEDELSKÝ, J.; CALETKA, P.; JÍCHA, M. Visualization of the air flow behind the automotive benchmark vent. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2015. p. 1-4. ISSN: 2100-014X.
Detail

TUHOVČÁK, J.; HEJČÍK, J.; JÍCHA, M. Modelling fluid flow in a reciprocating compressor. In EPJ Web of Conferences. EPJ Web of Conferences. France: EDP Sciences, 2015. p. 1-5. ISSN: 2100-014X.
Detail

VOSYNEK, P.; NÁVRAT, T.; PEČ, M.; POŘÍZKA, J.; DIVIŠ, P. How the Decrease of Collagen or Mineral Affect the Fracture in the Turkey Long Bones. World Academy of Science, Engineering and Technology, 2014, vol. 8, no. 12, p. 1753-1756. ISSN: 1307-6892.
Detail

MORAVČÍK, I.; PIŇOS, J.; ČÍŽEK, J.; DLOUHÝ, I. Mechanical Properties of Powder Deposits Compacted by Cold Spray Technology. SINTERING 2014. Nemecko: Sintering 2014, 2014. p. 308-308.
Detail

ŠTEFAN, D.; ZUBÍK, P.; HUDEC, M.; RUDOLF, P. Numerical and experimental investigation of swirling flow in a conical diffuser. In Proceedings of the International conference Experimental Fluid Mechanics 2014. EPJ Web of Conferences. EDP Sciences, 2014. p. 563-567. ISSN: 2100-014X.
Detail

ALI, F.; KANETA, M.; KŘUPKA, I.; HARTL, M. Experimental and numerical investigation on the behavior of transverse limited micro-grooves in EHL point contacts. Tribology International, 2015, vol. 84, no. 4, p. 81-89. ISSN: 0301-679X.
Detail

ALI, F.; KŘUPKA, I.; HARTL, M. Reducing the friction of lubricated nonconformal point contacts by transverse shallow micro-grooves. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, vol. 229, no. 4, p. 420-428. ISSN: 1350-6501.
Detail

OMASTA, M.; MACHATKA, M; SMEJKAL, D.; KŘUPKA, I.; HARTL, M. Influence of sanding parameters on adhesion recovery in contaminated wheel–rail contact. WEAR, 2015, vol. 322-323, no. 1, p. 218-225. ISSN: 0043-1648.
Detail

FUIS, V.; JANÍČEK, P.; NÁVRAT, T. Stress Analysis of the Ceramics Heads with different Sizes under the Destruction Tests. World Academy of Science, Engineering and Technology, 2014, vol. 8, no. 12, p. 1748-1752. ISSN: 1307-6892.
Detail

MARŠÁLEK, O.; NOVOTNÝ, P.; RAFFAI, P. Micro-lubrication of Directionally Oriented Contact Surfaces. Tribology in Industry, 2014, vol. 36, no. 4, p. 451-465. ISSN: 0354-8996.
Detail

ŠTEFAN, D.; RUDOLF, P. Proper Orthogonal Decomposition of Pressure Fields in a Draft Tube Cone of the Francis (Tokke) Turbine Model. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. IOP Publishing, 2015. p. 1-14. ISSN: 1742-6596.
Detail

ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J. Phenomenological Ductile Fracture Criteria Applied to the Cutting Process. World Academy of Science, Engineering and Technology, 2014, vol. 8, no. 12, p. 1204-1207. ISSN: 1307-6892.
Detail

RUDOLF, P.; ŠTEFAN, D. Reduced order model of draft tube flow. In IOP Conference Series-Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. IOP Science, 2014. p. 1-10. ISSN: 1755-1315.
Detail

BANSOD, Y.; BURŠA, J. A Concise Review of Soft Glassy Rheological Model of Cytoskeleton. Engineering Mechanics, 2014, vol. 21, no. 4, p. 279-285. ISSN: 1805-4633.
Detail

BANSOD, Y.; NANDANWAR, D.; BURŠA, J. Overview of Tensegrity - I: Basic structures. Engineering Mechanics, 2014, vol. 21, no. 5, p. 355-367. ISSN: 1805-4633.
Detail

BANSOD, Y.; BURŠA, J. Overview of Tensegrity - II: High frequency spheres. Engineering Mechanics, 2014, vol. 21, no. 6, p. 437-449. ISSN: 1805-4633.
Detail

POLZER, A.; PÍŠKA, M.; DUFKOVÁ, K. On the Modern CNC Milling With a Compensation of Cutting Tools Deflections. In DAAAM International Science Book 2014. 1. Vienna: DAAAM International Publishing, 2014. p. 311-322. ISBN: 978-3-901509-98-8.
Detail

NEKVASIL, R.; JEGLA, Z. Analýza praskání komory přehříváku kotle. All for Power, 2014, roč. 2014, č. 5, s. 11-13. ISSN: 1802-8535.
Detail

MLKVIK, M.; STÄHLE, P.; GAUKEL, V.; ZAREMBA, M.; JEDELSKÝ, J.; JÍCHA, M. Performance of Twin-Fluid Atomizers for Atomization of Viscous Solutions. In Proceedings of the International conference Experimental Fluid Mechanics 2014. EPJ Web of Conferences. Liberec: EDP Sciences, 2014. p. 366-370. ISSN: 2100-014X.
Detail

HOUFEK, M.; HOUFEK, L. Experimental determination of the loss of total endoprosthesis polyethylene cup using holographic interferometry. In IFMBE Proceedings. IFMBE PROCEEDINGS. 2015. p. 440-443. ISBN: 978-3-319-11775-1. ISSN: 1680-0737.
Detail

HOUFEK, M.; HOUFEK, L. Bifurcation And Chaos In Couplings With Clearance. In Materials Science and Engineering Technology. Advanced Materials Research. 2014. p. 2120-2124. ISBN: 9783038351023. ISSN: 1022-6680.
Detail

HRABOVSKÝ, J.; LOŠÁK, P.; HORSKÝ, J. Material parameters estimation of Small Punch test by two variants of genetic algorithms. In 22nd SVSFEM ANSYS Users' Group Meeting and Conference 2014. 1. Jasná: SVS FEM s.r.o., 2014. p. 57-65. ISBN: 978-80-905525-1-7.
Detail

LÍZAL, F.; JEDELSKÝ, J.; ADAM, J.; BĚLKA, M.; JÍCHA, M. Measurement of Aerosol Deposition in a Replica of Human Airways by Positron Emission Tomography. Busan, Korea: Korean Association for Particle and Aerosol Research, 2014. p. 1 (1 s.).
Detail

ELCNER, J.; LÍZAL, F.; JEDELSKÝ, J.; JÍCHA, M. Study of airflow in the trachea of idealized model of human tracheobronchial airways during breathing cycle. In EPJ Web of Conferences. EPJ Web of Conferences. Český Krumlov: EDP Sciences, 2014. p. 1-6. ISSN: 2100-014X.
Detail

LOŠÁK, P.; VLACH, R. Study of the response of the shaft loaded by Unbalanced Magnetic Pull. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014, 2014. p. 79-84. ISBN: 978-80-214-4817-9.
Detail

VLACH, R. Novel Approach to Thermoelectric Generator Modeling as Energy Harvesting System. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014. p. 725-728. ISBN: 978-80-214-4817-9.
Detail

SVĚRÁK, T.; Baker, G. J. CH.; SIKOROVÁ, K.; KEJÍK, P.; BULEJKO, P.; KRIŠTOF, O. Progress of the IR measurement in the area of the fine particulate material water content. In Proceedings of the 2nd International Conference on Advances in Applied Science and Environmental Engineering. USA: Institute of Research Engineers and Doctors, 2014. p. 20-23. ISBN: 978-1-63248-033-0.
Detail

LÍZAL, F.; JEDELSKÝ, J.; BĚLKA, M.; ZAREMBA, M.; MALÝ, M.; JÍCHA, M. Investigation of the Airflow inside Realistic and Semi-Realistic Replicas of Human Airways. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2015. p. 1-8. ISSN: 2100-014X.
Detail

DVOŘÁK, P. VUT contribution to Garteur Action Group 52. Transfer, 2014, vol. 2014, no. 23, p. 36-40. ISSN: 1801-9315.
Detail

Müllerová, J., Brůna, J., Pergl, J., DVOŘÁK, P., Kučera, L., Pyšek, P. Detekce a monitoring invazních druhů za pomoci metod DPZ. In Sborník příspěvků konference GIS Esri v ČR. 2014. Hybernská 24, 11000 Praha 1: ARCDATA PRAHA, s.r.o., 2014. s. 39-42. ISBN: 9788090531611.
Detail

JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P. Multifunkční jednotka pro snižování polutantů z odpadních plynů. In Ochrana Ovzdušia 2014. Kongres STUDIO, s.r.o., 2014. s. 120-123. ISBN: 978-80-89565-17-7.
Detail

MAZAL, P.; NOHÁL, L.; KOMENDA, L. Diagnostics of damage development of bearings and gears by acoustic emission method. International Journal of Microstructure and Materials Properties, 2014, vol. 9, no. 3/4/5, p. 433-447. ISSN: 1741-8429.
Detail

ŠTARHA, P.; MARTIŠEK, D.; MATOUŠEK, R. Numerical Method of Object Reconstruction Using Moment Method. In Mendel 2014. 2014. p. 241-248. ISBN: 978-80-214-4984-8.
Detail

POSPÍŠIL, J.; HUZLÍK, J.; LIČBINSKÝ, R. Dispersion of Pollutants from Line Sources in Small Municipalities. TRANSACTIONS ON TRANSPORT SCIENCES, 2014, vol. 7, no. 4, p. 161-168. ISSN: 1802-971X.
Detail

JINDROVÁ, E.; JAN, V.; ČUPERA, J. THE INFLUENCE OF SUBSTRATE PREPARATION, ANODIZATION CONDITIONS AND POST ANODIZING TREATMENT ON AAO MICROSTRUCTURE. In Metal 2014. 2014. p. 953-957. ISBN: 978-80-87294-52-9.
Detail

PÁLENÍKOVÁ, L.; JAN, V.; ČUPERA, J.; ČÍŽEK, J. MICROSTRUCTURE OF Fe-Al BINARY COLD SPRAY THICK DEPOSIT AFTER ANNEALING. In Metal 2014. 2014. p. 1328-1333. ISBN: 978-80-87294-52-9.
Detail

JAN, V.; ČUPERA, J.; ČÍŽEK, J. On the search for producing intermetallics by diffusion reaction of cold spray bulk deposits. Surface and Coatings Technology, 2015, vol. 2015, no. 264, p. 216-223. ISSN: 0257-8972.
Detail

VOPAŘIL, J.; DRÁPAL, L.; NOVOTNÝ, P. Aircraft engine crankshaft optimisation. MECCA - Journal of Middle European Costruction and Design of Cars, 2014, vol. XII, no. 1, p. 1-6. ISSN: 1214-0821.
Detail

ŠNAJDÁREK, L.; POSPÍŠIL, J.; BRÁZDIL, M. Heat transfer in rotor stator cavity. EPJ Web of Conferences, 2015, vol. 92, no. 2015, p. 558-562. ISSN: 2100-014X.
Detail

KOMÍNEK, J.; POHANKA, M. Estimation of the Number of Forward Time Steps for the Sequential Beck Approach Used for Solving Inverse Heat Conduction Problems. 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. p. 122-122. ISBN: 978-961-92518-7-4.
Detail

GUZEJ, M.; HORSKÝ, J.; GALLOVIČ, D.; ČERNÝ, P. Experimental verifications and numerical thermal simulations of automobile lamps. 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. p. 90-90. ISBN: 978-961-92518-7-4.
Detail

KRIŠTOF, O.; SVĚRÁK, T.; BULEJKO, P.; KEJÍK, P.; SIKOROVÁ, K. PILOT-PLANT SHOWER SCRUBBER FOR CLEANING POLLUTED GAS. 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. p. 128-128. ISBN: 978-961-92518-7-4.
Detail

KRIŠTOF, O.; SVĚRÁK, T.; KEJÍK, P.; BULEJKO, P.; SIKOROVÁ, K. CO2 absorption to the NaOH solution using pilot-plant wet shower scrubber. 21st International Congress of Chemical Engineering CHISA 2014 and 17th Conference PRES 2014, 23 - 27 August 2014, Praha, Czech Republic, Czech Society of Chemical Engineering. 2014. ISBN: 978-80-02-02555-9.
Detail

KEJÍK, P.; SVĚRÁK, T.; SIKOROVÁ, K.; KRIŠTOF, O.; BULEJKO, P. COIR-BASED FILLERS GRINDING AND BULK PROPERTIES. 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. p. 111-111. ISBN: 978-961-92518-7-4.
Detail

KINNARINEN, T.; TUUNILA, R.; HUHTANEN, M.; HÄKKINEN, A.; KEJÍK, P.; SVĚRÁK, T. Wet grinding of CaCO3 with a stirred media mill: Influence of obtained particle size distributions on pressure filtration propertie. POWDER TECHNOLOGY, 2015, vol. 273, no. 1, p. 54-61. ISSN: 0032-5910.
Detail

KEJÍK, P.; SVĚRÁK, T.; SIKOROVÁ, K.; KRIŠTOF, O.; BULEJKO, P. Specific grinding energy and phase changes of the limestone and corundum ground stock in the ultrafine activated comminution process. 21st International Congress of Chemical Engineering CHISA 2014 and 17th Conference PRES 2014, 23 - 27 August 2014, Praha, Czech Republic, Czech Society of Chemical Engineering. 2014. p. 1 (1 s.). ISBN: 978-80-02-02555-9.
Detail

HRABOVSKÝ, J.; CHABIČOVSKÝ, M.; HORSKÝ, J. The Effect of Discontinued Water Spray Cooling on the Heat Transfer Coefficient. World Academy of Science, Engineering and Technology, 2015, vol. 9, no. 1, p. 81-87. ISSN: 1307-6892.
Detail

VĚCHET, S.; KREJSA, J.; RŮŽIČKA, M.; MAŠEK, P. Building a Scaled Model of Autonomous Convoy Powered by ARM mbed Microcontrollers. In 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno University of technology, 2014. p. 711-714. ISBN: 978-80-214-4817-9.
Detail

ASTROUSKI, I.; RAUDENSKÝ, M.; DOHNAL, M. Fouling of plastic fiber heat exchanger. 21st International Congress of Chemical Engineering CHISA 2014 and 17th Conference PRES 2014, 23 - 27 August 2014, Praha, Czech Republic, Czech Society of Chemical Engineering. 2014. p. 1 (1 s.). ISBN: 978-80-02-02555-9.
Detail

VALIŠ, D.; ŽÁK, L.; CHALOUPKA, J. Prediction of Vehicle further Operation and Fault ased on Tribo-diagnostic. In Proceedings of the 2014 IEEE IEEM. Malajsie: IEEE, 2014. p. 33-37. ISBN: 978-1-4799-6410-9.
Detail

GLOS, J.; ŽÁK, L.; VALIŠ, D. Possibilities for Optimizing Maintenance of Military Vehicles on the Results of Tribological Diagnostics. International virtual journal for science, technics and innovations for the industry, 2014, vol. 2014, no. 5, p. 40-42. ISSN: 1313-0226.
Detail

GLOS, J.; ŽÁK, L.; VALIŠ, D. Model of Assessment Engine Oil Data. Transport Means 2014 Proceedings of 18th International Conference, 2014, vol. 2014, no. 1, p. 223-226. ISSN: 2351-4604.
Detail

GLOS, J.; ŽÁK, L.; VALIŠ, D. Possibilities for optimizing maintenance of military vehicles on the results of tribological diagnostics. Sbornik dokladi ot dvadeset i treta meždunarodna naučno-techničeska konferencia, 2014, no. 1, p. 17-19. ISSN: 1310-3946.
Detail

HRADIL, J. Complex geometrical constraints handling in the context of aerodynamic shape optimisation. Transfer, 2014, vol. 2014, no. 23, p. 23-26. ISSN: 1801-9315.
Detail

ŽÁK, L.; VALIŠ, D. Fuzzy approximation for oil field data. In MENDEL 2014, 20th International Conference on Soft Computing. Mendel Journal series. Brno: VUT Brno, 2014. p. 177-182. ISBN: 978-80-214-4984-8. ISSN: 1803-3814.
Detail

LÉTAL, T. Algorithmization issues of flat end check method according to EN 13445-3. In Book of extended abstracts 30th conference with international participation Computational Mechanics 2014. Plzeň: University of West Bohemia, 2014. p. 69-70. ISBN: 978-80-261-0429-2.
Detail

PÍŠKA, M. Povlaky, povlaky-bez nich to už prostě nepůjde!. MM Průmyslové spektrum, 2015, roč. 34, č. 1,2/2015, s. 53-54. ISSN: 1212-2572.
Detail

MAUDER, T.; ŠANDERA, Č.; ŠTĚTINA, J. Optimal Control Algorithm for Continuous Casting Process by Using Fuzzy Logic. STEEL RESEARCH INTERNATIONAL, 2015, vol. 86, no. 7, p. 785-798. ISSN: 1611-3683.
Detail

HÁJEK, J.; DOHNAL, M.; VONDÁL, J.; BROUKAL, J. Analysis of effervescent spray quality for oil-fired furnace application. Clean Technologies and Environmental Policy, 2015, vol. 17, no. 5, p. 1195-1205. ISSN: 1618-954X.
Detail

GALAS, R.; SMEJKAL, D.; OMASTA, M.; HARTL, M. Twin-Disc Experimental Device for Study of Adhesion in Wheel-Rail Contact. Engineering Mechanics, 2014, vol. 21, no. 5, p. 329-334. ISSN: 1805-4633.
Detail

FICZA, I.; ŠPERKA, P.; HARTL, M. Transient Calculations in Elastohydrodynamically Lubricated Point Contacts. Engineering Mechanics, 2014, vol. 2014 (21), no. 5, p. 311-319. ISSN: 1805-4633.
Detail

NOHÁL, L.; MAZAL, P. An Evaluation of Rolling Contact Fatigue of Metallic Materials Using Acoustic Emission Method. Engineering Mechanics, 2014, vol. 21, no. 5, p. 299-304. ISSN: 1802-1484.
Detail

VALIŠ, D.; ŽÁK, L. Contribution to oil data assessment for system condition determination. In Safety and Reliability: Methodology and Applications. UK, London: Taylor & Francis Group, London, 2015. p. 287-292. ISBN: 978-80-214-4984-8.
Detail

VALIŠ, D.; ŽÁK, L.; POKORA, O. Contribution to systém failure occurence prediction and to system remaining useful life estimation based on oil field data. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 2014, vol. 229, no. 1, p. 36-45. ISSN: 1748-006X.
Detail

VALIŠ, D.; ŽÁK, L. Wear particles and application of two areas regression function for technical system condition assessment. In Problemy Utrzymania Systemów Technicznych. N. 2014. p. 93-101. ISBN: 978-83-7814-269-0.
Detail

VALIŠ, D.; ŽÁK, L. Utilisation of selected mathematical functions for some metal oil data evaluation. In RELIABILITY and STATISTICS in TRANSPORTATION and COMMUNICATION. 2014. p. 344-354. ISBN: 978-9984-818-70-2.
Detail

ČÍŽEK, J.; MATĚJKOVÁ, M.; DLOUHÝ, I.; ŠIŠKA, F.; KAY, C.; KARTHIKEYAN, J.; KURODA, S.; KOVÁŘÍK, O.; SIEGL, J.; LOKE, K.; KHOR, K. Influence of Cold-Sprayed, Warm-Sprayed and Plasma Sprayed Layers Deposition on Fatigue Properties of Steel Specimens. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2015, vol. 24, no. 5, p. 758-768. ISSN: 1059-9630.
Detail

STRECKER, Z.; MAZŮREK, I.; ROUPEC, J.; KLAPKA, M. Influence of MR damper response time on semiactive suspension control efficiency. MECCANICA, 2015, vol. 50, no. 8, p. 1949-1959. ISSN: 0025-6455.
Detail

ŠLAPAL, J. A categorical approach to convergence. FILOMAT, 2016, vol. 30, no. 12, p. 3329-3338. ISSN: 0354-5180.
Detail

KLAPKA, M.; PANÁČEK, T.; NEVRLÝ, J. Experimental rig for simulation of hydromechanical system with energy regeneration. Engineering Mechanics, 2015, vol. 21, no. 5, p. 305-309. ISSN: 1805-4633.
Detail

KOŠŤÁL, D.; ŠPERKA, P.; HARTL, M. Controlling and Measuring Starvation Severity in EHL Contacts. Engineering Mechanics, 2014, vol. 21, no. 5, p. 321-328. ISSN: 1802-1484.
Detail

TRÁVNÍČEK, P.; KOTEK, L. Risks associated with the production of biogas in Europe. PROCESS SAFETY PROGRESS, 2015, vol. 34, no. 2, p. 172-178. ISSN: 1066-8527.
Detail

CAHA, T.; POSPÍŠIL, J.; BAČINSKÝ, M.; KUBÍK, M.; KÓŠA, Š. Instalace plynové turbíny SIEMENS SGT-700 a retrofit kotle K1 v areálu SYNTHOS Kralupy. All for Power, 2015, roč. 1, č. 1/2015, s. 164-169. ISSN: 1802-8535.
Detail

HUDÁK, I.; BĚLOHRADSKÝ, P.; SKRYJA, P. Effects of inert gases on NOx formation in the conventional burner. In Proceedings of the 7th European Combustion Meeting. Budapest: 2015. p. 187-188. ISBN: 978-963-12-1257-0.
Detail

VECHET, S.; KREJSA, J.; CHEN, K. Sensor Failure Detection in Autonomous Mobile Robot Application. In 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno University of technology, 2014. p. 375-380. ISBN: 978-80-214-4817-9.
Detail

TKACHENKO, S.; KOUŘIL, J.; MATLÁK, J.; ČUPERA, J.; DATSKEVICH, O.; TKACHENKO, I.; GRINKEVYCH, K.; KULAK, L.; FORET, R. Modifikace povrchu Ti-Si slitin pomocí elektronového svazku. In Využití laserů v průmyslu. Plzeň: 2015. s. 150-155.
Detail

HRDINA, J.; PAVLÍK, J. Reconstruction of an ellipse from its raster image. International Journal of Pure and Applied Mathematics, 2015, vol. 2015 (101), no. 2, p. 141-155. ISSN: 1311-8080.
Detail

HORSKÝ, J.; RAUDENSKÝ, M.; MORAVEC, R,; BLAZEK, K. Heat transfer coefficients for the secondary cooling zones in a continuous casting with the effect of steel chemistry. In OCELAŘI 2015. Ostrava: Tanger spol. s.r.o., 2015. p. 59-66. ISBN: 978-80-87294-56-7.
Detail

HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Influence of the impact angle and pressure on the spray cooling of vertically moving hot steel surfaces. Materiali in tehnologije, 2015, vol. 49, no. 3, p. 333-336. ISSN: 1580-2949.
Detail

STRÁNSKÝ, K.; JANOVÁ, D.; KAVIČKA, F.; PANTĚLEJEV, L.; SEKANINA, B.; SPOTZ, Z.; STRÁNSKÝ, L. K historii těžby polymetalických rud v lesní lokalitě Havírna u Štěpánova nad Svratkou. Slévárenství, 2015, roč. 2015, č. 3-4, s. 145-150. ISSN: 0037-6825.
Detail

ŠTEFAN, D.; ZUBÍK, P.; HUDEC, M.; RUDOLF, P. Numerical and experimental investigation of swirling flow in a conical diffuser. EPJ Web of Conferences, 2015, vol. 2015, no. 92, p. 1-5. ISSN: 2100-014X.
Detail

CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Techniques of measuring spray-cooling homogeneity. Materiali in tehnologije, 2015, vol. 49, no. 3, p. 337-341. ISSN: 1580-2949.
Detail

SVĚRÁK, T.; BAKER, C. G. J.; SIKOROVÁ, K.; KEJÍK, P.; BULEJKO, P.; KRIŠTOF, O. Progress of the IR measurement in the area of the fine particulate material water content. International Journal of Environmental Engineering, 2015, vol. 2, no. 1, p. 146-149. ISSN: 2374-1724.
Detail

CHABIČOVSKÝ, M.; HNÍZDIL, M.; TSENG, A.; RAUDENSKÝ, M. Effects of oxide layer on Leidenfrost temperature during spray cooling of steel at high temperatures. International journal of heat and mass transfer, 2015, no. 88, p. 236-246. ISSN: 0017-9310.
Detail

VRBKA, M.; NEČAS, D.; HARTL, M.; KŘUPKA, I.; URBAN, F.; GALLO, J. Visualization of lubricating films between artificial head and cup with respect to real geometry. Biotribology, 2015, vol. 1-2, no. 1, p. 61-65. ISSN: 2352-5738.
Detail

VOTAVOVÁ, H.; POHANKA, M. Study of Water Jets Collision of High Pressure Flat Jet Nozzles for Hydraulic Descaling. In ENGINEERING MECHANICS 2015 21st International Conference Engineering Mechanics 2015. Engineering Mechanics .... 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015. p. 354-355. ISBN: 978-80-86246-42-0. ISSN: 1805-8248.
Detail

PÍŠKA, M. Konkurenceschopná výroba začíná kvalitním řezným nástrojem. MM Průmyslové spektrum, 2015, roč. 34, č. 1,2/2015, s. 62-63. ISSN: 1212-2572.
Detail

BUZÍK, J.; LÉTAL, T. Influence of Vortex Excitation on the U-Tube Bundle. In ENGINEERING MECHANICS 2015 21st International Conference Engineering Mechanics 2015. Engineering Mechanics .... 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015. p. 38-39. ISBN: 978-80-86246-42-0. ISSN: 1805-8248.
Detail

MLKVIK, M.; ZAREMBA, M.; STÄHLE, P.; SCHUCHMANN, H.; GAUKEL, V.; JEDELSKÝ, J. Influence of the primary break-up conditions on the droplets size of the spray generated by twin fluid atomizers. In Engineering Mechanics 2015 Extended abstracts. Engineering Mechanics. Prague: AVCR, 2015. p. 204-205. ISBN: 978-80-86246-42-0. ISSN: 1805-4633.
Detail

KUBÍK, M.; MAZŮREK, I.; ROUPEC, J. Decreasing of sliding friction in hydraulic piston damper. In Engineering mechanics 2015. Prague: 2015. p. 170-171. ISBN: 978-80-86246-42-0.
Detail

JEGLA, Z.; VONDÁL, J.; HÁJEK, J. Standards for fired heater design: An assessment based on computational modelling. Applied Thermal Engineering, 2015, vol. 89, no. 1, p. 1068-1078. ISSN: 1359-4311.
Detail

BROŽOVÁ, T.; LUKS, T.; ASTROUSKI, I.; RAUDENSKÝ, M. Fatigue Testing of Polymeric Hollow Fibre Heat Transfer Surfaces by Pulsating Pressure Loads. In ENGINEERING MECHANICS 2015 21st International Conference Engineering Mechanics 2015. Engineering Mechanics .... 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015. p. 30-31. ISBN: 978-80-86246-42-0. ISSN: 1805-8248.
Detail

STRÁNSKÝ, M. Determination of the turning knife thermal stress during longitudinal turning. In ENGINEERING MECHANICS 2015 21st International Conference Engineering Mechanics 2015. Engineering Mechanics .... 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015. p. 298-299. ISBN: 978-80-86246-42-0. ISSN: 1805-8248.
Detail

KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Multibody Based Tool for Simulation of the Turbocharger Rotor Dynamics. In Engineering Mechanics 2015. Prague: Institute of Theoretical and Applied Mechanics, Academy of Science of the Czech Republic, 2015. p. 138-139. ISBN: 978-80-86246-42-0.
Detail

HADAŠ, Z.; VETIŠKA, V.; SMILEK, J.; ANDRŠ, O.; SINGULE, V. Efficiency of electromagnetic vibration energy harvesting system. In Proc. SPIE 9517, Smart Sensors, Actuators, and MEMS VII; and Cyber Physical Systems. Proceedings of SPIE. Bellingham, Washington, USA: SPIE, 2015. p. 95171H (95176H p.)ISBN: 9781628416442. ISSN: 0277-786X.
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. The influence of oxygen-enhanced combustion methods on NOx emissions, in-flame temperatures and heat flux distribution. In Proceedings of the 10th European Conference on Industrial Furnaces and Boilers. Porto: 2015. p. 1-11. ISBN: 978-972-99309-7-3.
Detail

KOTEK, L.; TRÁVNÍČEK, P.; BLECHA, P. Accident Analysis of European Biogas Stations. Chemical Engineering Transactions, 2015, vol. 2015, no. 43, p. 1933-1938. ISSN: 2283-9216.
Detail

ŠTETINA, J.; BŘEZINA, T.; HADAŠ, Z. Dynamic Analysis of Mechatronic System with Ball Screw. ENGINEERING MECHANICS 2015 21st International Conference Engineering Mechanics 2015. Engineering Mechanics .... 1. Svratka: Institute of Theoretical and Applied Mechanics, Academy of Science of the Czech Republic, 2015. p. 292-293. ISBN: 978-80-86246-42-0. ISSN: 1805-8248.
Detail

RAFFAI, P.; NOVOTNÝ, P.; DLUGOŠ, J. Computer Simualation of the Behavior of the Piston Ring Pack of Internal Combustion Engines. In ENGINEERING MECHANICS 2015 - 21st INTERNATIONAL CONFERENCE. Prague, Czech Republic: Academy of Sciences of the Czech Republic, v.v.i., 2015. p. 252-253. ISBN: 978-80-86246-42-0.
Detail

MARŠÁLEK, O.; NOVOTNÝ, P.; KNOTEK, J. Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing. In Engineering Mechanics 2015. 1. Prague: Institute of Theoretical and Applied Mechanics, Avademy of Sciences of the Czech Republic, v.v.i, Prague, 2015. p. 192-193. ISBN: 978-80-86246-42-0.
Detail

ALI, F.; KŘUPKA, I.; HARTL, M. Effects of out-of-contact lubricant channeling on friction and film thickness in starved elastohydrodynamic lubrication point contacts. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, vol. 229, no. 6, p. 1-9. ISSN: 1350-6501.
Detail

SMILEK, J.; HADAŠ, Z. Assessment of MEMS energy harvester for medical applications. In Proc. SPIE 9517, Smart Sensors, Actuators, and MEMS VII; and Cyber Physical Systems. Proceedings of SPIE. Bellingham, Washington, USA: SPIE, 2015. p. 95170N (95177N p.)ISBN: 9781628416442. ISSN: 0277-786X.
Detail

VETIŠKA, J.; HADAŠ, Z.; HOLUB, M. Multidisciplinary Multi-Body Modeling of Machine Tools. In Engineering mechanics 2015 - extended abstracts. 2015. p. 344-345. ISBN: 978-80-86246-42-0.
Detail

ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Chevron crack prediction using the extremely low stress triaxiality test. MM Science Journal, 2015, no. June, p. 617-621. ISSN: 1803-1269.
Detail

ANDRŠ, O.; VETIŠKA, J.; HOLUB, M.; KOVÁŘ, J. Model Based Design of Fuel Pump Control. In Engineering Mechanics 2015 Extended Abstracts. First edition, 2015. ŽĎAS, a.s. Žďár nad Sázavou: Institute of Theoretical and Applied Mechanics, Academy of Sciences of the Czech Republic, 2015. p. 10-11. ISBN: 978-80-86246-42-0.
Detail

ŠTĚTINA, J.; MAUDER, T.; KLIMEŠ, L.; KAVIČKA, F. NUMERICAL MODELS AND THEIR INDISPENSABILITY FOR FLEXIBLE CONTROL OF CONTINUOUS STEEL CASTING. In METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015. p. 98-104. ISBN: 978-80-87294-58-1.
Detail

ČUPERA, J. Resolution Limits of Low Voltage BSE Imaging in Scanning Electron Microscopy Resolution Limints of Low Voltage BSE Imaging in Scanning Electron Microscopy. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS CONFERENCE PROCEEDINGS. Brno: Brno University of Technology, 2015. p. 30-35. ISBN: 978-80-214-5146-9.
Detail

VOTAVOVÁ, H.; POHANKA, M.; BULEJKO, P. Cooling homogeneity measurement during hydraulic descaling in spray overlapping area. In METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015. p. 265-270. ISBN: 978-80-87294-58-1.
Detail

BRUMMER, V.; JECHA, D.; LEŠTINSKÝ, P.; SKRYJA, P.; HUDÁK, I. Pilot plant long-term test of particulate matter (PM) removal from air stream emerging from granulated fertilizers production (stationary source). In Air Pollution XXIII. Southampton, UK: WIT Press, 2015. p. 419-430. ISBN: 978-1-84564-964-7.
Detail

DLUGOŠ, J.; NOVOTNÝ, P.; RAFFAI, P. Advanced Computational Analysis of Connecting Rod of an Aircraft Engine. In ENGINEERING MECHANICS 2015 - 21st INTERNATIONAL CONFERENCE. Prague, Czech Republic: Academy of Sciences of the Czech Republic, v.v.i., 2015. p. 48-49. ISBN: 978-80-86246-42-0.
Detail

KUČERA, P.; PÍŠTĚK, V. A Computational Model of ATV Vehicle for Real-time Simulation. In Engineering Mechanics 2015. 1. Prague: Institute of Theoretical and Applied Mechanics, Avademy of Sciences of the Czech Republic, v.v.i, Prague, 2015. p. 172-173. ISBN: 978-80-86246-42-0.
Detail

KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P. Multi Body Analysis of the Turbocharger Supported by Fully Floating Ring Bearing. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 1, p. 14-18. ISSN: 1214-0821.
Detail

ŽÁK, L.; VALIŠ, D. COMPARISON OF REGRESSION AND FUZZY ESTIMATES ON FIELD OIL DATA. Mendel Journal series, 2015, vol. 2015, no. 1, p. 85-90. ISSN: 1803-3814.
Detail

MATĚJKOVÁ, M.; ČÍŽEK, J.; KAY, C.; KARTHIKEYAN, J.; KURODA, S.; KOVÁŘÍK, O.; SIEGL, J.; LOKE, K.; KHOR, K. Fatigue properties of materials with protective thermally deposited layers. In Multi-scale design of advanced materials. Brno: 2015. p. 109-116. ISBN: 978-80-214-5146-9.
Detail

NOVÁK, K.; POLZER, S.; TICHÝ,M.; BURŠA, J. Automatic Evaluation of Collagen Fiber Directions from Polarized Light Microscopy Images. MICROSCOPY AND MICROANALYSIS, 2015, vol. 21, no. 4, p. 863-875. ISSN: 1431-9276.
Detail

GUZEJ, M.; BARTULI, E.; KRIŠTOF, O. Water jet cooling of aluminium alloy. In METAL 2015, 24rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2015. p. 1439-1444. ISBN: 978-80-87294-58-1.
Detail

HANUSOVÁ, P.; DLOUHÝ, I. Mechano-chemical induction of Nb3Al intermetallic phases formation in aluminium alumina matrix. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS. Brno: 2015. p. 66-72. ISBN: 978-80-214-5146-9.
Detail

MATLÁK, J.; KOUŘIL, M.; DLOUHÝ, I. Electron beam surface heat treatment of selected materials. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS. 2015. p. 145-152. ISBN: 978-80-214-5146-9.
Detail

CHABIČOVSKÝ, M.; VOTAVOVÁ, M.; HORSKÝ, J.; TUROŇ, R.; ŠIMEČEK, P. Heat treatment of tubes. In METAL 2015, 24rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: Tanger Ltd., 2015. p. 1-6. ISBN: 978-80-87294-58-1.
Detail

KOTRBÁČEK, P.; HORSKÝ, J.; LUKS, T.; POHANKA, M. NUMERICAL SIMULATION AND VERIFICATION OF ROLL TEMPERATURE HISTORY DURING ROLLING CAMPAIGN. Roll5 2015. London, United Kingdom: IOM Communicatiins Ltd, 2015. p. 1-11.
Detail

KOMÍNEK, J.; HŘIBOVÁ, V.; POHANKA, M. Methodology of Evaluation of Heat Transfer Experiment on Aluminum sample. In METAL 2015 Full Texts of Papers. Ostrava: TANGER, 2015. p. 1-6. ISBN: 978-80-87294-58-1.
Detail

HORSKÝ, J.; KVAPIL, J.; KENETH, B.; MORAVEC, R. Determination of Thermal Contact Conductance Based on Unsteady Temperature Measurement. In AISTech 2015. AIST Association for Iron&Steel Technology. 2015. p. 3519-3525. ISBN: 978-1-935117-46-9. ISSN: 1551-6997.
Detail

NOVOTNÝ, P.; DLUGOŠ, J.; KNOTEK, J.; MARŠÁLEK, O.; RAFFAI, P. Role of Computational Simulations In Design Process of Piston Rings. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2014, no. 3, p. 1-7. ISSN: 1214-0821.
Detail

CHABIČOVSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; STRÁNSKÝ, M. In-line tepelné zpracování ocelových profilů a trubek. Hutnické listy, 2015, roč. 68, č. 2, s. 14-19. ISSN: 0018-8069.
Detail

RAUDENSKÝ, M.; ASTROUSKI, I.; REPPICH, M.;SCHMIDT, M. SOLAR PANEL COOLING SYSTEM WITH HOLLOW FIBRES. In SASEC 2015. SASEC2015/University of Pretoria, 2015. p. 316-320. ISBN: 978-1-77592-109-7.
Detail

CHABIČOVSKÝ, M.; HORSKÝ, J.; RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. DESIGN OF QUENCHING UNITS FOR HEAT TREATMENT OF TUBES. In European conference on Heat treatment 2015 a 22nd IFHTSE congres. Miláno: Associazione Italiana di metallurgia, 2015. p. 1-9. ISBN: 978-88-98990-03-0.
Detail

KOUTECKÝ, T.; PALOUŠEK, D.; BRANDEJS, J. Application of a reflectance model to the sensor planning system. In PROCEEDINGS OF SPIE - Automated Visual Inspection and Machine Vision. Proceedings of SPIE. Munich, Germany: SPIE, 2015. p. 953005-1 (953005-13 p.)ISBN: 9781628416909. ISSN: 0277-786X.
Detail

BÁRTKOVÁ, D.; DYMÁČEK, P.; LANGER, J.; VÁLKA, L. Determination of mechanical properties of light alloys and composites by means of Small Punch Testing. In Multi-Scale Design of Advanced Materials Conference Proceedings. 2015. p. 59-65. ISBN: 9788021451469.
Detail

HRABOVSKÝ, J.; CHABIČOVSKÝ, M.; ASTROUSKI, I.; KOTRBÁČEK, P. THE HEAT TRANSFER COEFFICIENT AT DISCONTINUED WATER SPRAY COOLING. In METAL 2015, 24rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER, 2015. p. 1-6. ISBN: 978-80-87294-58-1.
Detail

HŘIBOVÁ, V.; KOMÍNEK, J.; RAUDENSKÝ, M. Vliv teploty a koncentrace polymerních roztoků na intenzitu chlazení při tepelném zpracování. Hutnické listy, 2015, roč. 68, č. 1, s. 10-15. ISSN: 0018-8069.
Detail

STRÁNSKÝ, M.; BROŽOVÁ, T.; RAUDENSKÝ, M.; HNÍZDIL, M.; TUROŇ, R. Effect of Various Spray Cooling Configurations on Hardness Profile of Tubes. In METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015. p. 1-6. ISBN: 978-80-87294-58-1.
Detail

NEČAS, D.; ŠPERKA, P.; VRBKA, M.; KŘUPKA, I.; HARTL, M. Film thickness mapping in lubricated contacts using fluorescence. MM Science Journal, 2015, vol. 4, no. 4, p. 821-824. ISSN: 1803-1269.
Detail

RUDOLF, P.; KLAS, R. Numerical simulation of pump-intake vortices. In EPJ Web of Conferences. EPJ Web of Conferences. EDP Sciences, 2015. p. 1-6. ISSN: 2100-014X.
Detail

KOTEK, L.; TRÁVNÍČEK, P.; BABINEC, F.; JUNGA, P.; MUKHAMETZIANOVA, L. Vliv vybraných mikroklimatických podmínek na pracovníky ve velínu. Automa, 2015, roč. 2015, č. 5, s. 48-50. ISSN: 1210-9592.
Detail

MORAVČÍK, I.; ČÍŽEK, J.; DLOUHÝ, I. Preparation of high entropy alloy powders by mechano-chemical reactions. In MULTI-SCALE DESIGN OF ADVANCEDMATERIALS. Brno: Brno University of Technology, Antonínská 548/1, 601 90 Brno, 2015. p. 73-78. ISBN: 978-80-214-5146-9.
Detail

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. The effect of surface grooves on film breakdowns in point contacts. Tribology International, 2016, vol. 102, no. 1, p. 249-256. ISSN: 0301-679X.
Detail

KLIMEŠ, L.; MAUDER, T.; ŠTĚTINA, J. Comparison of regulation algorithms for secondary cooling of continuous casting process. In Proceedings of METAL 2015. Ostrava: TANGER Ostrava, s.r.o., 2015. p. 39-44. ISBN: 978-80-87294-58-1.
Detail

LEŠTINSKÝ, P.; JECHA, D.; BRUMMER, V.; STEHLÍK, P. Wet Flue Gas Desulfurization Using a New O-Element Design Which Replaces the Venturi Scrubber. In International Science Index. World Academy of Science, Engineering and Technology. New York: 2015. p. 130-134. ISSN: 1307-6892.
Detail

ŠTĚTINA, J.; KLIMEŠ, L.; MAUDER, T. New Challenges in Modelling and Secondary Cooling Control of Continuous Steel Casting. In METEC & 2nd ESTAD 2015 Proceedings. 1. Dusseldorf: Steel Institute VDEh, 2015. p. 1-8. ISBN: 978-3-00-049542-7.
Detail

AL KHADDOUR, S., STRATIL,L., VÁLKA, L., DLOUHÝ, I. Correlation of reference temperature with general yield temperature for notched tensile specimens. In MULTI-SCALE DESIGN OF ADVANCEDMATERIALS - CONFERENCE PROCEEDINGS. Brno: Brno University of Technology, 2015. p. 24-29. ISBN: 978-80-214-5146-9.
Detail

VLAŠIC, F.; MAZAL, P.; BÁRTKOVÁ, D. Hodnocení raných stádií únavového poškozování využitím metody akustické emise v oblasti energetického průmyslu. All for Power, 2015, roč. 9, č. 3/2015, s. 98-100. ISSN: 1802-8535.
Detail

HORYNOVÁ, M.; DOLEŽAL, P.; ZAPLETAL, J.; GEJDOŠ, P.; PODRÁBSKÝ, T. Influence of aluminium content on corrosion behavior of AZ type magnesium alloy. In MULTI-SCALE DESIGN OF ADVANCEDMATERIALS-CONFERENCE PROCEEDINGS. 2015. p. 42-47. ISBN: 978-80-214-5146-9.
Detail

STRÁNSKÝ, K.; JANOVÁ, D.; PANTĚLEJEV, L.; KAVIČKA, F.; SPOTZ, Z.; STRÁNSKÝ, L.; SEKANINA, B. Opuštěné štoly a šachty na Cumberku nad Záskalským potokem. Slévárenství, 2015, roč. 2015, č. 5-6, s. 220-223. ISSN: 0037-6825.
Detail

ŠTĚPÁNEK, R.; PANTĚLEJEV, L.; MAN, O. Influence of microstructure on tensile properties of magnesium alloy AZ91. In METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS. 2015. p. 1252-1257. ISBN: 978-80-87294-62-8.
Detail

HÁJEK, J.; JUŘENA, T.; BAIER, B.; BAGHERZADEH, A.; SCHNICK, T.; SMEJKAL, Q. CFD Process Modeling of Industrial Calcination of Diatomite. CHEMIE INGENIEUR TECHNIK, 2015, vol. 87, no. 7, p. 991-997. ISSN: 0009-286X.
Detail

HANUSOVÁ, P.; DLOUHÝ, I.; ČUPERA, J. PREPARATION OF Nb – Nb3Al/Al2O3 NANOCOMPOSITE POWDER BY MECHANO-CHEMICAL REACTION. In METAL 2015. Brno: Tanger Ltd., 2015. p. 320-325. ISBN: 978-80-87294-62-8.
Detail

ROČŇÁKOVÁ, I.; DOLEŽALOVÁ WEISSMANNOVÁ, H.; HORYNOVÁ, M.; DOLEŽAL, P.; PODRÁBSKÝ, T. Bio-corrosion of magnesium alloys in different simulated fluids for biomedical application. In Multi-scale design of advanced materials. 2015. p. 48-53. ISBN: 978-80-214-5146-9.
Detail

HOLUB, M.; VETIŠKA, J.; KNOBLOCH, J.; MINÁŘ, P. Analysis of Machine Tool Spindle under Load. In Engineering mechanics 2015 - extended abstracts. 2015. p. 94-95. ISBN: 978-80-86246-42-0.
Detail

GAVENDOVÁ, P.; ČÍŽEK, J.; DLOUHÝ, I.; ČUPERA, J.; HANUSOVÁ, P. COMPARISON OF CoNiCrAlY COATINGS PRODUCED BY HVOF AND CGDS-SPRAYING TECHNIQUE. In METAL 2015. Brno: Tanger Ltd., 2015. p. 152-158. ISBN: 978-80-87294-62-8.
Detail

VONDÁL, J.; HÁJEK, J. Wall heat transfer in gas-fired furnaces: Effect of radiation modelling. Applied andComputational Mechanics, 2015, vol. 9, no. 1, p. 67-78. ISSN: 1802-680X.
Detail

HRABEC, D.; POPELA, P.; ROUPEC, J.; MAZAL, J.; STODOLA, P. Two-Stage Stochastic Programming for Transportation Network Design Problem. In Mendel 2015: Recent Advances in Soft Computing. Advances in Intelligent Systems and Computing. 2015. p. 17-25. ISBN: 978-3-319-19824-8. ISSN: 2194-5357.
Detail

JECHA, D.; BRUMMER, V.; LEŠTINSKÝ, P. Snižování polutantu VOC na multifunkční jednotce. In Sborník přednášek - VOC 2015 - Emise organických látek z technologických procesů a metody jejich snižování. Český svaz vědeckotechnických společností. Pardubice: Český svaz vědeckotechnických společností, 2015. s. 49-53. ISBN: 978-80-02-02597-9.
Detail

HRABEC, D.; POPELA, P.; ROUPEC, J.; JINDRA, P.; NOVOTNÝ, J. Hybrid Algorithm for Wait-and-See Transportation Network Design Problem with Linear Pricing. Mendel Journal series, 2015, vol. 2015, no. 1, p. 183-188. ISSN: 1803-3814.
Detail

GAVENDOVÁ, P.; DLOUHÝ, I.; ČÍŽEK, J.; ČUPERA, J.; HANUSOVÁ, P. Effect of electron beam remelting to microstructure and phase modification of HVOF and CGDS CoNiCrAlY coatings. In Heat Treatment and Surface Engineering from tradition to innovation. Italy: Associazione Italia di Metallurgia, 2015. p. 152-159. ISBN: 978-88-98990-03-0.
Detail

VONDÁL, J.; JEGLA, Z.; HÁJEK, J. Fired heaters: validation of design parameters based on numerical modelling. In 10th European Conference on Industrial Furnaces and Boilers. Rio Tinto, Portugal: CENERTEC, 2015. p. 1-12. ISBN: 978-972-99309-7-3.
Detail

KLIMEŠ, L.; ŠTĚTINA, J. A rapid GPU-based heat transfer and solidification model for dynamic computer simulations of continuous steel casting. Journal of Materials Processing Technology, 2015, vol. 226, no. 1, p. 1-14. ISSN: 0924-0136.
Detail

RUDIANTO, H.; JANG, G.; SUN, Y.; KIM, Y.; DLOUHÝ, I. Evaluation of Sintering Behavior of Premix Al-Zn-Mg-Cu Alloy Powder. Advances in Materials Science and Engineering, 2015, vol. 2015, no. 1, p. 1-8. ISSN: 1687-8442.
Detail

PÍŠTĚK, V.; SVÍDA, D. Advanced Computational Models of Elastomer Parts in Automotive Technology. Perners' Contacts, 2015, vol. X, no. 2, p. 43-52. ISSN: 1801-674X.
Detail

HEJTMÁNEK, P.; BLAŤÁK, O.; SUCHÝ, J.; VANČURA, J. Comparison of Vehicle Handling Models. Perners' Contacts, 2015, vol. X, no. 2, p. 5-16. ISSN: 1801-674X.
Detail

LEGUILLON, D.; MARTIN, É.; ŠEVEČEK, O.; BERMEJO, R. Application of the coupled stress-energy criterion to predict the fracture behaviour of layered ceramics designed with internal compressive stresses. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2015, vol. 2015, no. 54, p. 94-104. ISSN: 0997-7538.
Detail

KOŠŤÁL, D.; NEČAS, D.; ŠPERKA, P.; SVOBODA, P.; KŘUPKA, I.; HARTL, M. Lubricant Rupture Ratio at Elastohydrodynamically Lubricated Contact Outlet. Tribology Letters, 2015, vol. 59, no. 3, p. 1 (jasne p.)ISSN: 1023-8883.
Detail

STRECKER, Z.; MAZŮREK, I.; ROUPEC, J.; MACHÁČEK, O.; KUBÍK, M.; KLAPKA, M. Design of magnetorheological damper with short time response. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2015, vol. 26, no. 14, p. 1951-1958. ISSN: 1045-389X.
Detail

MORAVČÍK, I.; ČÍŽEK, J.; DLOUHÝ, I. MULTICOMPONENT ALLOY POWDERS PREPARATION BY MECHANICAL ALLOYING. In METAL 2015. Brno: TANGER Ltd., 2015. p. 195-205. ISBN: 978-80-87294-62-8.
Detail

KVAPIL, J.; HORSKÝ, J.; POHANKA, M. Stanovení tepelného odporu v kontaktu na základě nestacionárního teplotního měření. Hutnické listy, 2015, roč. LXVIII, č. 4, s. 15-19. ISSN: 0018-8069.
Detail

KOMÍNEK, J.; GUZEJ, M.; HORSKÝ, J. Metodika vyhodnocování intenzity chlazení vodního paprsku dopadajícího na svislý povrch. Hutnické listy, 2015, roč. LXVIII, č. 4, s. 26-30. ISSN: 0018-8069.
Detail

KOUTNÝ, D.; PALOUŠEK, D.; KOUKAL, O.; ZIKMUND, T.; PANTĚLEJEV, L.; DOKOUPIL, F. Processing of High Strength Al-Cu alloy Using 400W Selective Laser Melting – Initial Study. In Lasers in Manufacturing 2015 Proceedings. Bochum: German Scientific Laser Society, 2015. p. 1-11.
Detail

ZATOČILOVÁ, A.; PALOUŠEK, D.; BRANDEJS, J. Development of a photogrammetry system for the measurement of rotationally symmetric forgings. In Proc. SPIE 9525, Optical Measurement Systems for Industrial Inspection IX, 952501 (June 22, 2015);. Proceedings of SPIE. Volume 9525. Munich, GERMANY: SPIE-INT SOC OPTICAL ENGINEERING, 2015. p. 95250R (95257R p.)ISBN: 9781628416855. ISSN: 0277-786X.
Detail

PETRUŠKA, J.; NÁVRAT, T. Optimization of leveling process by a fast simulation algorithm. In Manufacturing Engineering and Technology for Manufacturing Growth. IERI & PRESS, 2015. p. 105-108. ISBN: 978-1-61275-074-3.
Detail

CALETKA, P.; PECH, O.; JEDELSKÝ, J.; JÍCHA, M.; RICHTER, J. Comparison of Methods for Determination of Borders of Stream Visualized by Smoke Method. In 34th Conference of Departments of Fluids Mechanics and Thermomechanics Proceedings of Extended Abstracts. 1. Ústí nad Labem: University J. E. Purkyně in Ústí nad Labem Faculty of Production Technology and Management Department of Machines and Mechanics, 2015. p. 11-12. ISBN: 978-80-7414-912-2.
Detail

KŮDELA, J.; POPELA, P. Two-stage stochastic facility location problem: GA with benders decomposition. Mendel Journal series, 2015, vol. 2015, no. 1, p. 53-58. ISSN: 1803-3814.
Detail

HAVLÍK, P.; KOUŘIL, J.; FORET, R.; DLOUHÝ, I. Vliv procesních parametrů při svařování elektronovým svazkem na výskyt vad. In Využití laseru v průmyslu. Plzeň: 2015. s. 144-149.
Detail

PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Computational tools for transmission dynamics modelling. In Setkání uživatelů MSC.SOFTWARE 2015. 1. MSC.Software s.r.o., 2015. p. 146-150.
Detail

MAHMOUD, H.; VLAŠIC, F.; MAZAL, P. SIMULATION OF OPERATIONAL LOADING OF PRESSURE EQUIPMENT BY MEANS OF NON-DESTRUCTIVE TESTING. In METAL 2015. 2015. Brno: Tanger Ltd., 2015. p. 321-327. ISBN: 978-80-87294-58-1.
Detail

VRÁNA, R.; KOUKAL, O.; KOUTNÝ, D.; PALOUŠEK, D.; KREJČÍ, P. Device for Testing Impact Resistance of Lattice Structures Panels Produced by the Selective Laser Melting. In Book of Proceedings of 56th International Conference of Machine Design Department. První. 2015. p. 144-149. ISBN: 978-80-552-1377-4.
Detail

MLKVIK, M.; STÄHLE, P.; SCHUCHMANN, H.; GAUKEL, V.; JEDELSKÝ, J.; JÍCHA, M. Twin-fluid atomization of viscous liquids: The effect of atomizer construction on breakup process, spray stability and droplet size. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2015, vol. 77, no. 1, p. 19-31. ISSN: 0301-9322.
Detail

HUZLÍK, R.; ONDRŮŠEK, Č. Návrh generátoru pro malou vodní elektrárnu. Elektrorevue - Internetový časopis (http://www.elektrorevue.cz), 2015, roč. 2015, č. 4, s. 150-161. ISSN: 1213-1539.
Detail

NOHÁL, L.; KŘEMEN, J.; NĚMEČEK, J. Moderní přístupy v konstrukci železničních ložisek. In Súčasné problémy v koľajových vozidlách - PRORAIL 2015. Diel II. 2015. Žilina: VTS pri Žilinskej univerzite v Žilině, 2015. s. 69-72. ISBN: 978-80-89276-49-3.
Detail

FERDAN, T.; ŠOMPLÁK, R.; ZAVÍRALOVÁ, L.; PAVLAS, M.; FRÝBA, L. A Waste-to-Energy Project: A Complex Approach towards the Assessment of Investment Risks. Applied Thermal Engineering, 2015, vol. 89, no. 1, p. 1127-1136. ISSN: 1359-4311.
Detail

FEDOROVA, S. Computational Modeling of Fiber Composites with Thick Fibers as Homogeneous Structures with Use of Couple Stress Theory. In Design and Analysis of Reinforced Fiber Composites. Pedro V. Marcal, Nobuki Yamagata. 2015. p. 25-47. ISBN: 978-3-319-20007-1.
Detail

SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Finite element analyses of biaxial tension testing with different ways of specimen clamping. 2014.
Detail

SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Finite element based parametric study of inaccuracies in mechanical testing of soft tissue. 2015.
Detail

KISELA, T.; ČERMÁK, J. Asymptotic Stability Of Dynamic Equations With Two Fractional Terms: Continuous Versus Discrete Case. Fractional Calculus and Applied Analysis, 2015, vol. 18, no. 2, p. 437-458. ISSN: 1311-0454.
Detail

MAN, V.; NOVÁK, K.; POLZER, S.; BURŠA, J. Can Laplace law replace more sophisticated analyses of aortic aneurysms?. Špičák: 2014.
Detail

MAN, V.; NOVÁK, K.; POLZER, S.; BURŠA, J. Applicability of simplified models of abdominal aortic aneurysms. Barcelona: 2014.
Detail

POLZER, S.; BURŠA, J.; MAN, V. ALGORITHM FOR INTRODUCING RESIDUAL STRESSES INTO FINITE ELEMENT MODELS OF ANEURYSMS. Prague: 2015.
Detail

MAN, V.; SKÁCEL, P.; POLZER, S.; ŠEVČÍK, V.; BURŠA, J. PRACTICAL ASPECT OF BIAXIAL TESTING OF VASCULAR TISSUE. Prague: 2015.
Detail

SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. ANALYSIS OF ACCURACY OF BIAXIAL TESTS BASED ON COMPUTATIONAL SIMULATIONS. In CMBE15 4th International Conference on Computational & Mathematical Biomedical Engineering. Swansea, United-Kingdom: CMBE, Zeta Computational Resources Ltd.Swansea, United-Kingdom, 2015. p. 168-171. ISBN: 978-0-9562914-3-1.
Detail

BANSOD, Y.; BURŠA, J. Continuum-based modeling approaches to cell mechanics. World Academy of Science, Engineering and Technology, 2015, vol. 2, no. 9, p. 1202-1213. ISSN: 1307-6892.
Detail

ZAVÍRALOVÁ, L.; ŠOMPLÁK, R.; PAVLAS, M.; KROPÁČ, J.; POPELA, P.; PUTNA, O.; GREGOR, J. Computational system for simulation and forecasting in waste management incomplete data problem. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Miláno, Itálie: Aidic Servizi Srl, 2015. p. 763-768. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

ŠOMPLÁK, R.; TOUŠ, M.; PAVLAS, M.; GREGOR, J.; POPELA, P.; RYCHTÁŘ, A. Multi-Commodity Network Flow Model Applied to Waste Processing Cost Analysis for Producers, Chemical Engineering Transactions. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milano, Itálie: AIDIC Serviyi Srl, 2015. p. 733-738. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

BURŠA, J.; BANSOD, Y. Models of Living Cells on the Basis of Tensegrity Structures. In 6th World Conference on Structural Contral and Monitoring. Barcelona, Spain.: 6th World Conference on Structural Control and Monitoring (6WCSCM)., 2014. p. 140-146. ISBN: 978-84-942844-5-8.
Detail

MOURALOVÁ, K.; KOVÁŘ, J. QUALITY OF DIMENSIONS ACCURANCY OF COMPONENTS AFTER WEDM DEPENDING ON THE HEAT TREATMENT. MM Science Journal, 2015, vol. 2015, no. 4, p. 790-793. ISSN: 1803-1269.
Detail

BANSOD, Y.; BURŠA, J. Computational model of vascular smooth muscle cell. Vranovska Ves, Czech Republic.: XXIII Cytoskeletal Club, Veterinary Research Institute, Masaryk University., 2015.
Detail

BANSOD, Y.; BURŠA, J. Tensigrity Models of Mechanical Behaviour of Living Cell. Spicak, Czech Republic.: Computational Mechanics 2013 Conference; University of West Bohemia, Pilsen 2013, 2014.
Detail

BANSOD, Y.; BURŠA, J. Computational Model of Cytoskeleton Based on Tensegrity Principle. Vranovska Ves, Czech Republic.: XXII Cytoskeletal Club, Veterinary Research Institute, Masaryk University., 2014.
Detail

BANSOD, Y.; BURŠA, J. Computational model of intracelluar structure for simulation of mechanical tests of cells. Barcelona, Spain: 11th World Congress on Computational Mechanics (WCCM)., 2014.
Detail

BANSOD, Y.; BURŠA, J. Application of tensegrity principle to Cytoskeleton. Barcelona, Spain: 6th World Conference on Structural Control and Monitoring., 2014.
Detail

BANSOD, Y.; BURŠA, J. Tensigrity Principle Based Computational Model of Cytoskeleton. In 6th World Conference on Structural Control and Monitoring (6WCSCM). Barcelona, Spain: 6th World Conference on Structural Control and Monitoring (6WCSCM)., 2014. p. 3317-3326. ISBN: 978-84-942844-5-8.
Detail

HOLUB, M.; BLECHA, P.; BRADÁČ, F.; KAŇA, R. VOLUMETRIC COMPENSATION OF THREE-AXIS VERTICAL MACHINING CENTRE. MM Science Journal, 2015, vol. 2015, no. October, p. 677-681. ISSN: 1805-0476.
Detail

MOURALOVÁ, K.; DVOŘÁKOVÁ, J.; DVOŘÁK, J.; KOVÁŘ, J.; KARPÍŠEK, Z.; SLIWKOVÁ, P. Experimental analysis on machinability of aluminium alloy using WEDM technology. MM Science Journal, 2015, vol. 2015, no. 4, p. 722-727. ISSN: 1803-1269.
Detail

SVOBODA, P.; KOŠŤÁL, D.; KŘUPKA, I. Experimental Investigation of Lubrication Film Formation at Start-up of Smooth Surfaces. In Book of Proceedings of 56th International Conference of Machine Design Departments. 1. Nitra: Slovak University of Agriculture in Nitra, 2015. p. 375-380. ISBN: 978-80-552-1377-4.
Detail

ŠTARHA, P.; MATOUŠEK, R.; ZIKMUND, T. Measuring velocity of passing vehicle by utilising image processing. Mendel Journal series, 2015, vol. 2015, no. 21, p. 165-168. ISSN: 1803-3814.
Detail

KARAMPELAS, S. Conformal Cartesian Grids for Symmetric Bodies: A Novel Boundary Fitted Grid Method. The Journal of Applied & Computational Mathematics, 2015, vol. 4, no. 4, p. 1-15. ISSN: 2168-9679.
Detail

ŠUBRT, K.; HOUŠKA, P.; HADAŠ, Z. Přesnost polohování s motorem Piezo LEGS. Automa, 2015, roč. 2015, č. 8-9, s. 64-65. ISSN: 1210-9592.
Detail

POKORNÝ, J.; JÍCHA, M. Implementation of the Fiala-based thermophysiological model coupled with the Zhang regression model of human thermal comfort. Proceedings of the 16th International Conference on Environmental Ergonomics. Portsmouth, United Kingdom: International Society for Environmental Ergonomics, 2015. p. 46-46. ISBN: 978 1 86137 656 5.
Detail

POKORNÝ, J.; JÍCHA, M. Implementace Fialova termofyziologického modelu tepelného komfortu v Matlabu. Vytápění, větrání, instalace, 2015, č. 4, s. 99-102. ISSN: 1210-1389.
Detail

PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. VIRTUAL GEARBOX DEVELOPMENT AND VERIFICATION. In KOKA 2015. Bratislava: Faculty of Mechanical Engineering, Slovak University of Technology and Designing, Department of Cars, Ships and Combustion Engines, 2015. p. 239-244. ISBN: 978-80-227-4424-9.
Detail

LISÝ, M.; BALÁŠ, M.; ŠPILÁČEK, M. Gasification of Selected Wastes in Fluidized Bed Reactor. Waste forum, 2015, vol. 2015, no. 3, p. 147-155. ISSN: 1804-0195.
Detail

STRÁNSKÝ, K.; JANOVÁ, D.; KAVIČKA, F.; PANTĚLEJEV, L.; STRÁNSKÝ, L.; SPOTZ, Z.; SEKANINA, B. K těžbě a zpracování stříbronosných a zlatonosných rud v Jílovém u Prahy a v některých vybraných lokalitách. Slévárenství, 2015, roč. LXIII, č. 7-8, s. 302-306. ISSN: 0037-6825.
Detail

ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Understanding the edge crack phenomenon in ceramic laminates. Frattura ed Integrita Strutturale, 2015, vol. 9, no. 34, p. 362-370. ISSN: 1971-8993.
Detail

STRÁNSKÝ, K.; JANOVÁ, D.; PANTĚLEJEV, L.; KAVIČKA, F.; SPOTZ, Z.; STRÁNSKÝ, L.; SEKANINA, B. Historie, průzkum a analýza rudnin z opuštěného důlního díla na Cumberku. Hutnické listy, 2015, roč. LXVIII, č. 4, s. 46-51. ISSN: 0018-8069.
Detail

VALIŠ, D.; ŽÁK, L.; POKORA, O. Failure prediction of diesel engine based on occurrence of selected wear particles in oil. ENGINEERING FAILURE ANALYSIS, 2014, vol. 56, no. 10/2015, p. 501-511. ISSN: 1350-6307.
Detail

VINTR, Z.; VALIŠ, D.; ŽÁK, L. Selected Engine Oil Data Assessment and In-Service Operation Estimation. In Proceedings of the 2015 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2015). Chengdu, China: Institute of Reliability Engineering, 2014. p. 1-9. ISBN: 978-1-4799-1016-8.
Detail

ZAREMBA, M.; MALÝ, M.; MLKVIK, M.; JEDELSKÝ, J.; JÍCHA, M. Droplet dynamics in sprays generated by four different twin-fluid atomizers. In Turbulence, Heat and Mass Transfer 8. Turbulence, Heat and Mass Transfer. Sarajevo, Bosna and Herzegovina: Begel House Inc., 2015. p. 649-652. ISBN: 978-1-56700-427-4. ISSN: 2377-2816.
Detail

KOTEK, L.; NOSEK, A.; FIALA, A.; ZAHÁLKA, J. Comparison of Taguchi’s partial correction technique with control charts. MM Science Journal, 2015, vol. 2015, no. 3, p. 701-705. ISSN: 1803-1269.
Detail

ASTROUSKI, I.; RAUDENSKÝ, M.; DOHNAL, M. Fouling of Polymeric Hollow Fiber Heat Exchanger by Wastewater. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Italy: Italian Association of Chemical Engineering - AIDIC, 2015. p. 949-954. ISBN: 978-88-95608-36-5. ISSN: 1974-9791.
Detail

RAFFAI, P.; NOVOTNÝ, P.; MARŠÁLEK, O. Numerical Calculation of Mechanical Losses of the Piston Ring Pack of Internal Combustion Engines. Journal of the Balkan Tribological Association, 2015, vol. 2015, no. 4, p. 796-809. ISSN: 1310-4772.
Detail

VĚCHET, S.; KREJSA, J.; CHEN, K. Enhancement of Autonomous Robot Navigation via Sensor Failure Detection. In Advances in Intelligent systems and computing. Warsaw: Springer, 2015. p. 657-652. ISBN: 978-3-319-23921-7.
Detail

ŠUBRT, K.; HOUŠKA, P. The Measurement of the Operating Characteristics of the Piezoelectric Linear Motor. In EDPE 2015 Proceedings. 1. Košice: Technical University of Košice, 2015. p. 387-392. ISBN: 978-1-4673-9661-5.
Detail

BŘEZINA, T.; BŘEZINA, L.; VETIŠKA, J. Machine Tool Behavior Improvement Using Vibration Neutralizer and Absorber. Acta Mechanica Slovaca, 2015, vol. 19, no. 4, p. 6-12. ISSN: 1335-2393.
Detail

NOHÁL, L.; KOMENDA, L.; DVOŘÁČEK, J.; MAZAL, P. Importance of Acoustic Emission Method in Evaluation of Durability of Rolling Contact. In 11th European Conference on Non-Destructive Testing, Volume 1 - 4. 2014. Brusel: EFNDT, 2014. p. 956-959. ISBN: 978-1-63439-504-5.
Detail

MALÝ, M.; JANÁČKOVÁ, L.; JEDELSKÝ, J.; JÍCHA, M. Experimental investigation of pressure-swirl atomizers with a modification in a geometry of spill-return orifice. In 34th Conference of Departments of Fluids Mechanics and Thermomechanics Proceedings of Extended Abstracts. 1. Litoměřice: 2015. p. 1-2. ISBN: 978-80-7414-912-2.
Detail

VLAŠIC, F.; BÁRTKOVÁ, D.; MAZAL, P. Assessment of Early Fatigue of Power Plant Material Using Acoustic Emission Method. In 11th European Conference on Non-Destructive Testing. 2014. Brusel: EFNDT, 2014. p. 3275-3282. ISBN: 978-1-63439-504-5.
Detail

KOTEK, L.; SEMANOVÁ, P.; SUJOVÁ, E.; DADO, M.; KUČERA, M.; HNILICA, R.; JONÁK, M. Effects of a Cutting Fluid on Aerosol Size Distribution during Turning. Manufacturing TECHNOLOGY, 2015, vol. 13, no. 3, p. 367-373. ISSN: 1213-2489.
Detail

JEDELSKÝ, J.; MALÝ, M.; JÍCHA, M.; DEL CORRAL, N. INTERACTION OF THE AIR WITH LIQUID IN PRESSURE-SWIRL SPRAYS. 1. Melbourne, Australia: The University of Melbourne, 2015. p. 1-6.
Detail

JEDELSKÝ, J.; MALÝ, M.; HOLUB, M.; JÍCHA, M. SOME ASPECTS OF DISINTEGRATION OF ANNULAR LIQUID SHEET IN PRESSURE-SWIRL ATOMIZATION. In Conference on Modelling Fluid Flow. Budapest: 2015. p. 1-8. ISBN: 978-963-313-190-9.
Detail

HADAŠ, Z.; ONDRŮŠEK, Č. Nonlinear spring-less electromagnetic vibration energy harvesting system. European Physical Journal-Special Topics, 2015, vol. 224, no. 14-15, p. 2881-2896. ISSN: 1951-6355.
Detail

LUKS, T.; HORSKÝ, J.; BARTULI, E. Experimentální stanovení teplotních a silových poměrů ve válcovací mezeře. Hutnické listy, 2015, roč. LXVIII, č. 4, s. 9-14. ISSN: 0018-8069.
Detail

MÁŠA, V.; TOUŠ, M.; PAVLAS, M. Using a utility system grey-box model as a support tool for progressive energy management and automation of buildings. Clean Technologies and Environmental Policy, 2016, vol. 18, no. 1, p. 195-208. ISSN: 1618-954X.
Detail

BLECHA, P. Designing process of a new safe machine tool. In Design of Machine Tools. MM special. Praha: MM publishing, 2015. p. 74-99. ISBN: 978-80-260-8637-6.
Detail

BLECHA, P. Energy efficiency improvement in machine tools. In Design of CNC Machine Tools. MM special. Praha: MM publishing, 2015. p. 582-591. ISBN: 978-80-260-8637-6.
Detail

BLECHA, P. Virtual prototyping of machine tools. In Design of CNC Machine Tools. MM special. Praha: MM publishing, 2015. p. 666-677. ISBN: 978-80-260-8637-6.
Detail

KOTRBÁČEK, P.; HORSKÝ, J.; Parilák, L.; Ma´tas, P.; Zalaba, D. Vysoce účinné a energeticky úsporné chladicí systémy pro chlazení profilových válců. In Odborná konferencia ŽP VVC 2015. 1. Brezno: HLP grafik s.r.o., 2015. s. 91-97. ISBN: 9788097209155.
Detail

VRÁNA, R.; PALOUŠEK, D.; KOUTNÝ, D.; KOUKAL, O.; ZIKMUND, T.; KREJČÍ, P. Impact resistance of lattice structure made by Selective Laser Melting technology. In Euro PM2015 Proceedings. Reims, France: 2015. p. 1-6. ISBN: 978-1-899072-47-7.
Detail

KOUKAL, O.; KOUTNÝ, D.; PALOUŠEK, D.; VRÁNA, R.; ZIKMUND, T.; PANTĚLEJEV, L. Research about the Influence of Process Parameters of Selective Laser Melting on Material EN AW 2618. In Euro PM2015 Proceedings. Reims, France: 2015. p. 1-6. ISBN: 978-1-899072-47-7.
Detail

VONDÁL, J.; HÁJEK, J.; DOHNAL, M. Numerical study of stirred tank with multiphase system. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 1051-1056. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

PETRUŠKA, J.; NÁVRAT, T. Straightening of Circular Bars – Simulation and Experiment. In Proceedings of the 8th International Congress of Croatian Society of Mechanics. 2015. p. 1-6. ISBN: 978-953-7539-21-4.
Detail

KLIMEŠ, L.; MAUDER, T.; ŠTĚTINA, J. Pokročilé metody řízení provozu stroje pro plynulé odlévání oceli. In Sborník příspěvků odborné konference ŽP VVC 2015. Podbrezová, Slovensko: ŽP Výskumno-vývojové centrum s.r.o., 2015. s. 41-46. ISBN: 978-80-972091-4-8.
Detail

KRACÍK, P.; ŠPILÁČEK, M.; BALÁŠ, M.; POSPÍŠIL, J. Boiling On Sprinkled Tube Bundle. In Proceedings of the 2nd International Conference on POWER and ENERGY SYSTEMS (POES '15). 1. Sliema, Malta: WSEAS Press, 2015. p. 23-29. ISBN: 978-1-61804-329-0.
Detail

DOHNAL, M.; HÁJEK, J.; VONDÁL, J. Unsteadiness and Spatio-Temporal Statistics in Intermediate Effervescent Spray Region. In CHEMICAL ENGINEERING TRANSACTIONS - VOL.45. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 1027-1032. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

HÁJEK, J.; JUŘENA, T. New Numerical Treatment of Source Term in Convective Transfer of Heat between Fluid and Porous Solid Matrix. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2016, vol. 26, no. 2, p. 409-426. ISSN: 0961-5539.
Detail

SKRYJA, P.; BĚLOHRADSKÝ, P.; HUDÁK, I.; JUŘENA, T. Experimental Study on NOx Formation in Gas-staged Burner. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2015. p. 997-1002. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

ELCNER, J.; LÍZAL, F.; JEDELSKÝ, J.; JÍCHA, M.; CHOVANCOVÁ, M. Numerical investigation of inspiratory airflow in a realistic model of the human tracheobronchial airways and a comparison with experimental results. Biomechanics and Modeling in Mechanobiology, 2016, vol. 15, no. 2, p. 447-469. ISSN: 1617-7959.
Detail

HADAŠ, Z.; LÁN, R. Modelling and Verification of Piezoelectric Vibration Energy Harvester. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. Switzerland: Springer International Publishing Switzerland, 2016. p. 305-310. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
Detail

JEGLA, Z.; HÁJEK, J. Tepelné zatížení v oblasti změny průměru trubkového hadu v radiační komoře ohřevné pece. CHEMagazín, 2016, roč. 26, č. 1, s. 30-33. ISSN: 1210-7409.
Detail

MIČIETA, J.; HÁJEK, J.; JANDAČKA, J. Simplified Model of Combustion Process in Fuel Bed. In TRANSCOM PROCEEDINGS 2015. Žilina: University of Ţilina, 2015. p. 166-172. ISBN: 978-80-554-1048-7. ISSN: 1339-9829.
Detail

BŘEZINA, T.; BŘEZINA, L.; VETIŠKA, J.; MAREK, J. Initial assessment of multi-mass absorber influence on machine tool vibrations. In Advanced mechatronis solutions. Advances in Intelligent Systems and Computing. Switzerland: Springer International Publishing AG Switzerland, 2015. p. 201-207. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
Detail

BRUMMER, V.; JECHA, D.; MARTINEC, J.; SKRYJA, P.; STEHLÍK, P. Impact of catalytic oxidation operating conditions on VOC and CO conversions on the Pt-Pd/Al2O3 catalyst. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Milan, Italy: Aidic Servizi S.r.l., 2015. ISBN: 978-88-95608-36-5.
Detail

PAVLAS, M.; ŠOMPLÁK, R. Predikování budoucích nákladů za zpracování odpadů s využitím nástroje NERUDA. In Sborník konference. Praha: CEMC, 2015. s. 1-11. ISBN: 978-80-85990-26-3.
Detail

NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; KNOTEK, J.; DLUGOŠ, J. Methods for Solution of Slide Bearing Tribology and Dynamics. In Deterioration, Dependability, Diagnostics. Brno: University of Defence, 2015. p. 61-68. ISBN: 978-80-7231-431-7.
Detail

DVOŘÁK, P. Artificial Neural Networks for Surrogate-based Optimization in Preliminary Aerodynamic Design. In Eurogen 2015 Extended Abstracts Book. ECCOMAS: European Community on Computational Methods in Applied Sciences. Glasgow, UK: University of Strathclyde, 2015. p. 28-34. ISBN: 9788890632310.
Detail

GREPL, R.; ČOUPEK, P.; RADOŠ, J.; KONVIČNÝ, J.; KREJČÍK, M. Modeling of Kinematics, Dynamics and Design of Electronics Control Unit for an Experimental Robot with Hybrid Locomotion. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. Springer, 2015. p. 39-44. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
Detail

BŘEZINA, T. Mechatronics at designing of CNC machine tools. In Design of CNC Machine Tools. MM special. Praha: MM publishing, 2015. p. 598-615. ISBN: 978-80-260-8637-6.
Detail

KOŠŤÁL, D.; ŠPERKA, P.; SVOBODA, P.; KŘUPKA, I.; HARTL, M. Experimental observation of elastohydrodynamically lubricated contacts replenishment. MM Science Journal, 2015, no. 2015/3, p. 640-644. ISSN: 1805-0476.
Detail

ŠTĚTINA, J.; KATOLICKÝ, J.; RAMÍK, P. CONTROL OF SOFT REDUCTION OF CONTINUOUS SLAB CASTING WITH A THERMAL MODEL. Materiali in tehnologije, 2015, vol. 5, no. 49, p. 725-729. ISSN: 1580-2949.
Detail

GREPL, R.; SOVA, V.; CHALUPA, J. Adaptive Control of Electro-Mechanical Actuator using Receptive Field Weighted Regression. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. 2016. p. 621-626. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
Detail

DVOŘÁK, P.; MÜLLEROVÁ, J.; BARTALOŠ, T.; BRŮNA, J. Unmanned Aerial Vehicles for Alient Plant Species Detection and Monitoring. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 2015, vol. XL-1/W4, no. ICWG I/Vb, p. 83-90. ISSN: 2194-9034.
Detail

CHALUPA, J.; GREPL, R.; SOVA, V. Design of Configurable DC Motor Power-Hardware-In-the-Loop Emulator for Electronic-Control-Unit Testing. In Automation, Computing and Manufacturing for New Economic Growth. 2015. p. 173-178. ISBN: 978-0-9926801-0-7.
Detail

GREPL, R.; MATĚJÁSKO, M.; BASTL, M.; ZOUHAR, F. Design of a Fault Tolerant Redundant Control for Electro Mechanical Drive System. In Automation, Computing and Manufacturing for New Economic Growth. 2015. p. 323-328. ISBN: 978-0-9926801-0-7.
Detail

GUZEJ, M.; HORSKÝ, J. Stanovení intenzity chlazení během semikontinuálního odlévání hliníkových slitin. Hutnické listy, 2015, roč. LXVIII, č. 4, s. 20-25. ISSN: 0018-8069.
Detail

ZUBÍK, M.; PROKOP, A.; ŘEHÁK, K.; NOVOTNÝ, P. The effect of the gear parameters to the noise of transmission. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2015. p. 357-362. ISSN: 2345-0533.
Detail

VONDRA, M.; BOBÁK, P.; MÁŠA, V. Využití odpadního tepla k úpravě odpadních vod z průmyslových procesů. Vodohospodářské technicko-ekonomické informace, 2015, č. 6/2015, s. 35-43. ISSN: 0322-8916.
Detail

MÁŠA, V.; KUBA, P. Efficient use of compressed air for dry ice blasting. Journal of Cleaner Production, 2016, vol. 111, no. A, p. 76-84. ISSN: 0959-6526.
Detail

GÓRNISIEWICZ, T.; KOMENDA, L.; NOHÁL, L.; MAZAL, P. Optimization of Mixer Truck Gearbox Bearings. In Book of Proceeding of 56th International Conference of Machine Design Departments. 2015. Nitra: Publishing Center SUA Nitra, 2015. p. 29-36. ISBN: 978-80-552-1377-4.
Detail

POHANKA, M.; VOTAVOVÁ, H. OVERCOOLING IN OVERLAPPING AREAS DURING HYDRAULIC DESCALING. In Book of abstracts. 23rd International Conference on Materials and Technology. Ljubljana: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, 2015. p. 199-199. ISBN: 978-961-92518-8-1.
Detail

RIDWAN-PRAMANA, A.; MARCIÁN, P.; BORÁK, L.; NARRA, N.; FOROUZANFAR, T.; WOLFF, J. Structural and mechanical implications of PMMA implant shape and interface geometry in cranioplasty – a finite element study. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY, 2016, vol. 44, no. 1, p. 34-44. ISSN: 1010-5182.
Detail

VALIŠ, D.; ŽÁK, L.; POKORA, O. System Condition Estimation Based on Selected Tribodiagnostic Data. Quality and Reliability Engineering International, 2016, vol. 32, no. 2, p. 635-645. ISSN: 0748-8017.
Detail

VALIŠ, D.; ŽÁK, L.; POKORA, O.; LÁNSKÝ, P. Perspective analysis outcomes of selected tribodiagnostic data used as input for condition based maintenance. RELIABILITY ENGINEERING & SYSTEM SAFETY, 2016, vol. 145, no. 1, p. 231-242. ISSN: 0951-8320.
Detail

PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Complex Evaluation of Transmission NVH Parameters. In Transport Means 2015. Transport Means. Kaunas: Kaunas University of Technology, 2015. p. 563-566. ISSN: 1822-296X.
Detail

VALIŠ, D.; ŽÁK, L. Oil Additives Used as Indicator and Input for Preventive Maintenance Optimisation. In International Conference on Military Technologies 2015 (ICMT). Brno, Česká republika: IEEE, 2015. p. 1-6. ISBN: 9788072319763.
Detail

VALIŠ, D.; ŽÁK, L.; CHALOUPKA, J. Oil quality and system maintenance optimisation. In Safety and Reliability of Complex Engineered Systems. London: CR Press Taylor & Francis Group, 2015. p. 2473-2480. ISBN: 9781138028791.
Detail

SVĚRÁK, T.; BULEJKO, P.; MAYEROVÁ, K.; KEJÍK, P.; KRIŠTOF, O.; RAUDENSKÝ, M. Hiding Power of Aluminum Metal Pigments Development in the Ball Mill Grinding Process. Solid State Phenomena, 2016, vol. 244, no. 1, p. 19-25. ISSN: 1662-9779.
Detail

KUČERA, P.; PÍŠTĚK, V. Longitudinal and lateral dynamics of a commercial vehicle in Simulink software. In Proceeding of International Conference Transport Means 2015. Transport Means. Kaunas Univ Technol, Kaunas, LITHUANIA: KAUNAS UNIV TECHNOLOGY PRESS, K DONELAICIO 73, KAUNAS LT 3006, LITHUANIA, 2015. p. 458-461. ISSN: 1822-296X.
Detail

KINNARINEN T.; TUUNILA R.; HUHTANEN M.; HÄKKINEN A.; KEJÍK, P.; SVĚRÁK, T. Prediction of pressure filtration characteristics of CaCO3 suspensions ground in a vertical stirred media mill. MINERALS ENGINEERING, 2015, vol. 83, no. 1, p. 201-204. ISSN: 0892-6875.
Detail

KRACÍK, P.; POSPÍŠIL, J. Effect of Tube Pitch on Heat Transfer in Sprinkled Tube Bundle. Acta Polytechnica, 2015, vol. 55, no. 5, p. 329-334. ISSN: 1210-2709.
Detail

VOTAVOVÁ, H.; POHANKA, M. Study of Water Jet Collision of High Pressure Flat Jet Nozzles for Hydraulic Descaling. In Engineering Mechanics 2015. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016. p. 152-158. ISBN: 978-3-03835-700-1. ISSN: 1660-9336.
Detail

SVOBODA, P.; KOŠŤÁL, D.; KŘUPKA, I.; HARTL, M. Study of Scale Effect in a Starved Elastohydrodynamically Lubricated Contact. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 138-143. ISSN: 1662-7482.
Detail

DONG, J.; SVOBODA, P.; VRBKA, M.; KOŠŤÁL, D.; URBAN, F.; ČÍŽEK, J.; ROUPCOVÁ, P.; DONG, H.; KŘUPKA, I.; HARTL, M. Towards near-permanent CoCrMo prosthesis surface by combining micro-texturing and low temperature plasma carburising. Journal of the mechanical behavior of biomedical materials, 2016, vol. 55, no. 1, p. 215-227. ISSN: 1751-6161.
Detail

ŠMÍD, M.; HORNÍK, V.; HUTAŘ, P.; KUNZ, L.; HRBÁČEK, K.; JOCH, A. Vliv rozdílných podmínek přesného lití na vysokocyklovou únavu superslitiny MAR-M 247 při vysokých teplotách. Slévárenství, 2015, č. 9-10, s. 340-344. ISSN: 0037-6825.
Detail

FRÝZA, J.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Roughness Effects in Impact EHL of Elliptical Contacts. Tokyo: Japanese Society of Tribologists, 2015. p. 971-972.
Detail

GALAS, R.; OMASTA, M.; KŘUPKA, I.; HARTL, M. Effect of Friction Modifiers on Adhesion in Wheel-Rail Contact. Tokyo: Japanese Society of Tribologists, 2015. p. 973-974.
Detail

BULEJKO, P.; BÍLEK, V. Influence of Chemical Additives and Curing Conditions on Mechanical Properties and Carbonation Resistance of Alkali Activated Slag Composites. 23rd INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY PROGRAM AND BOOK OF ABSTRACTS. Ljubljana, Lepi pot 11, Ljubljana, Slovenija: Inštitut za kovinske materiale in tehnologije, 2015. p. 66-66. ISBN: 978-961-92518-8-1.
Detail

KEJÍK, P.; SVĚRÁK, T.; KRIŠTOF, O.; BULEJKO, P.; MAYEROVÁ, K. Attritor iron content measurement via objective colour determination. 23rd INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY PROGRAM AND BOOK OF ABSTRACTS. Ljubljana, Lepi pot 11, Ljubljana, Slovenija: Inštitut za kovinske materiale in tehnologije, 2015. p. 125-125. ISBN: 978-961-92518-8-1.
Detail

HORNÍK, V.; ŠMÍD, M.; HUTAŘ, P.; KUNZ, L.; HRBÁČEK, K. Effect of different investment casting conditions on high cycle fatigue of MAR-M 247 superalloy at elevated temperatures. METAL 2015. Tanger Ltd., 2015. ISBN: 978-80-87294-58-1.
Detail

PÍŠTĚK, V.; KLIMEŠ, L.; MAUDER, T. Dynamic models of elastomer parts using mass-spring-damper system. In 19th International conference Transport Means 2015 Proceedings. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2015. p. 63-66. ISSN: 1822-296X.
Detail

DRÁPAL, L.; NOVOTNÝ, P. Shape Design of a Fire-ring. In Scientific Proceedings KOKA 2015. Bratislava: Slovak University of Technology in Bratislava, 2015. p. 175-184. ISBN: 978-80-227-4424-9.
Detail

DRÁPAL, L.; NOVOTNÝ, P. Design and Simulation of Progressive Crank Train. In Transport Means 2014: Proceeding of the 19th International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2015. p. 240-243. ISBN: 9955-09-935-6. ISSN: 1822-296X.
Detail

DRÁPAL, L.; NOVOTNÝ, P.; PÍŠTĚK, V. Dynamic Simulation of Progressive Crank Train. In Advanced Mechatronics Solution. Advances in Intelligent Systems and Computing. 393. Scientific Publishing Services Pvt. Ltd. Chemai India: Springer International Publishing Switzerland, 2015. p. 207-212. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
Detail

ZELENÝ, M.; SOZINOV, A.; BJÖRKMAN, T.; STRAKA, L.; NIEMINEN, R. M. Ab initio study of properties of Co- and Cu- doped Ni-Mn-Ga alloys. In International Conference on Martensitic Transformations, ICOMAT-2014. Materials Today: Proceedings. Elsevier Ltd., 2015. p. S601 (S604 p.)ISSN: 2214-7853.
Detail

NĚMCOVÁ, Z.; KOTEK, L. Quality Management Systems as an Element of Security In Manufacturing Companies. In Proceedings of 25th International-Business-Information-Management-Association Conference. Amsterdam, NETHERLANDS: 2015. p. 2064-2072. ISBN: 978-0-9860419-4-5.
Detail

KOTEK, L.; TŮMA, Z.; BLECHA, P.; NĚMCOVÁ, Z.; HABADA, P. Evaluation of human error of response to auditory and visual signals in the virtual reality. In Safety and Reliability of Complex Engineered Systems. London: CRC Press, 2015. p. 2997-3001. ISBN: 978-1-138-02879-1.
Detail

KOTEK, L.; TRÁVNÍČEK, P.; JUNGA, P.; SVOBODA, Š. Risk analysis in processing of power plant radioactive sludge into low-temperature matrices. In Safety and Reliability of Complex Engineered Systems. London: CRC Press, 2015. p. 3501-3506. ISBN: 978-1-138-02879-1.
Detail

NEČAS, D.; VRBKA, M.; URBAN, F.; KŘUPKA, I.; HARTL, M.; GALLO, J. An experimental investigation of lubricant film formation in artificial hip joints. Proceedings of The 8th International Biotribology Forum and The 36th Biotribology Symposium. Yokohama: 2015. p. 73-74.
Detail

KOTOUL, M.; SKALKA, P.; DLOUHÝ, I. Crack Bridging Modelling in Bioglass® Based Scaffolds Using Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics. Key Engineering Materials (print). Pfaffikon, Switzerland: Trans Tech Publications, 2015. p. 105-108. ISSN: 1013-9826.
Detail

ALI, F.; KŘUPKA, I.; HARTL, M. Mechanism for Controlling Oil Replenishment in Starved Elliptical EHL Contacts. Tribology Letters, 2015, vol. 60, no. 37, p. 1-8. ISSN: 1023-8883.
Detail

URBAN, F.; NEČAS, D.; VRBKA, M.; KŘUPKA, I.; HARTL, M. In Situ Observation of Lubricant Film within Artificial Hip Joints. Tokyo: Japanese Society of Tribologists, 2015. p. 860-861.
Detail

MOSKALÍK, J. Nánosy na teplosměnných plochách kotle spalovny komunálních odpadů. All for Power, 2015, roč. 2015, č. 02, s. 20-26. ISSN: 1802-8535.
Detail

SUZUKI, N.; AOKI, K.; MARCIÁN, P.; BORÁK, L.; WAKABAYASHI, N. A threshold of mechanical strain intensity for the direct activation of osteoblast function exists in a murine maxilla loading model. Biomechanics and Modeling in Mechanobiology, 2016, vol. 15, no. 5, p. 1091-1100. ISSN: 1617-7959.
Detail

HOLUB, M.; HRDINA, J.; VAŠÍK, P.; VETIŠKA, J. Three-axes error modeling based on second order dual numbers. Journal of Mathematics in Industry, 2015, vol. 5, no. 2, p. 1-11. ISSN: 2190-5983.
Detail

NEČAS, D.; VRBKA, M.; URBAN, F.; KŘUPKA, I.; HARTL, M. The effect of lubricant constituents on lubrication mechanisms in hip joint replacements. Journal of the mechanical behavior of biomedical materials, 2016, vol. 55, no. 3, p. 295-307. ISSN: 1751-6161.
Detail

KUČERA, P.; PÍŠTĚK, V. PODÉLNÁ A PŘÍČNÁ DYNAMIKA NÁKLADNÍHO VOZIDLA S POHONEM 6x6. Perners' Contacts, 2015, roč. X, č. 3, s. 81-86. ISSN: 1801-674X.
Detail

SVÍDA, D. Zvýšení konkurenceschopnosti spalovacího motoru na stlačený zemní plyn. Perners' Contacts, 2015, roč. X, č. 3, s. 137-150. ISSN: 1801-674X.
Detail

MÁŠA, V.; VONDRA, M. Operational Problems: Biomass Boilers with Oversized Output. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 331-336. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
Detail

ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Prediction of central bursting in the process of forward extrusion using the uncoupled ductile failure models. Advances in Materials and Processing Technologies, 2015, vol. 1, no. 1-2, p. 43-48. ISSN: 2374-068X.
Detail

BŘEZINA, T.; BŘEZINA, L.; VETIŠKA, J. Improvement of heavy machine tool dynamics by passive dynamic vibration absorber. MM Science Journal, 2015, vol. 4, no. 4, p. 838-845. ISSN: 1805-0476.
Detail

JEBÁČEK, I.; HORÁK, M. Measuring of a Nose Landing Gear Load during Take-Off and Landing. Applied Mechanics and Materials, 2015, vol. 821, no. 821, p. 325-330. ISSN: 1662-7482.
Detail

CHABIČOVSKÝ, M.; HORSKÝ, J.; RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. Design of quenching units for heat treatment of tubes. La Metallurgia Italiana, 2016, vol. 2016, no. 1, p. 23-28. ISSN: 0026-0843.
Detail

Volkov, Parygin, Lukin, Ryzhenko, Kovanov, Naumov, Soukal, Pochylý, Fialová. Analysis of the Effect of Hydrophobic Properties of Surfaces in the Flow Part of Centrifugal Pumps on Their Operational Performance. Thermal Engineering (English translation of Teploenergetika), 2015, vol. 62, no. 11, p. 817-824. ISSN: 0040-6015.
Detail

SVOBODA, P.; KOŠŤÁL, D.; KŘUPKA, I.; HARTL, M. Experimental Investigation of Lubrication Film Formation at Start-up of Smooth Surfaces. MM Science Journal, 2015, vol. 2015, no. December, p. 825-828. ISSN: 1805-0476.
Detail

MAUDER, T.; CHARVÁT, P.; KLIMEŠ, L.; ŠTĚTINA, J. VARIOUS APPROACHES TO NUMERICAL DISCRETIZATION OF THERMAL MODEL WITH PHASE CHANGE. In ASME 2015 International Mechanical Engineering Congress and Exposition Volume 8B: Heat Transfer and Thermal Engineering. 1. Houston, Texas, USA: IMECE2015, 2015. p. 1-11. ISBN: 978-0-7918-5750-2.
Detail

NÁVRAT, T.; VLK, M.; PEČ, M.; HOUFEK, L.; PETRUŠKA, J. Korekce vlivu plastizace při vyhodnocení zbytkové napjatosti metodou vrtání otvoru. In Výpočty konstrukcí metodou konečných prvků. 2015. s. 47-48. ISBN: 978-80-87012-56-7.
Detail

KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Critical review of geometry of tension-torsion specimens used in ductile fracture calibration. In Výpočty konstrukcí metodou konečných prvků 2015. 2015. p. 65-66. ISBN: 978-80-87012-56-7.
Detail

NOHÁL, L.; MAZAL, P. Monitorování stavu valivých ložisek pomocí metody akustické emise. In NDE for Safety / Defektoskopie 2015. 2015. Brno: Vysoké učení technické v Brně ve spolupráci s ČNDT, 2015. s. 91-94. ISBN: 978-80-214-5280-0.
Detail

MATLÁK, J.; DOLEŽAL, P.; ZAPLETAL, J.; DLOUHÝ, I. Electron beam surface quenching of X37CrMoV51 tool steel swages. In Chemicko-tepelné zpracování kovových povrchů. 2015. p. 102-110. ISBN: 978-80-904462-8-1.
Detail

LÉTAL, T.; JEGLA, Z. Návrh vyztužení kouřovodů. All for Power, 2015, roč. 9, č. 5, s. 86-88. ISSN: 1802-8535.
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. Intenzifikace spalovacího procesu vysoce čistým kyslíkem. All for Power, 2015, roč. 9, č. 5, s. 92-95. ISSN: 1802-8535.
Detail

POLZER, S.; GASSER, T. Biomechanical rupture risk assessment of abdominal aortic aneurysms based on a novel probabilistic rupture risk index. Journal of the Royal Society Interface, 2015, vol. 113, no. 12, p. 1-11. ISSN: 1742-5689.
Detail

MARTIŠEK, D.; PROCHÁZKOVÁ, J.; FICKER, T. High-quality three-dimensional reconstruction and noise reduction of multifocal images from oversized samples. JOURNAL OF ELECTRONIC IMAGING, 2015, vol. 24, no. 5, p. 1-15. ISSN: 1017-9909.
Detail

JECHA, D.; BRUMMER, V.; SKRYJA, P.; STEHLÍK, P. Měření emisí VOC a CO v proudu odpadního plynu z výroby kyseliny akrylové. CHEMagazín, 2015, roč. XXV (2015), č. 6, s. 8-11. ISSN: 1210-7409.
Detail

DLUGOŠ, J.; NOVOTNÝ, P. Computational Modelling of Piston Ring Dynamics in 3D. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 1, p. 1-7. ISSN: 1214-0821.
Detail

ŠOUKAL, J.; POCHYLÝ, F.; VARCHOLA, M.; PARYGIN A.G.; VOLKOV A. V.; KHOVANOV G.P.; NAUMOV A.V. Selection of Axial Hydraulic Turbines for Low Head Microhydropower Plants. Thermal Engineering (English translation of Teploenergetika), 2015, vol. 62, no. 12, p. 862-867. ISSN: 0040-6015.
Detail

VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D.; ZIKMUND, T. Impact Resistance of Lattice Structure Made By Selective Laser Melting From Alsi12 Alloy. MM Science Journal, 2015, vol. 2015, no. 4, p. 852-855. ISSN: 1805-0476.
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. Snižování emisí NOx u automatického blokového hořáku optimalizací jeho geometrie. In 2015. s. 1-12.
Detail

SLIWKOVÁ, P.; PÍŠKA, M. On the cutting performance of coated HSS taps when machining of austenitic steel. Technologické inžinierstvo, 2014, vol. 28, no. 1, p. 28-77. ISSN: 1336-5967.
Detail

HOLUB, M.; VETIŠKA, J.; KNOBLOCH, J.; MINÁŘ, P. Analysis of Machine Tool Spindles under Load. Applied Mechanics and Materials, 2016, vol. 2016, no. 821, p. 608-613. ISSN: 1662-7482.
Detail

SMILEK, J.; HADAŠ, Z. A study of kinetic energy harvesting for biomedical application in the head area. Microsystem Technologies, 2016, vol. 22, no. 7, p. 1535-1547. ISSN: 0946-7076.
Detail

KLIMEŠ, L.; ŠTĚTINA, J.; MAUDER, T. Steel structure prediction for continuous steel casting by means of a parallel GPU-based heat transfer and solidification model. In ASME 2015 International Mechanical Engineering Congress and Exposition; Volume 8B: Heat Transfer and Thermal Engineering. Houston, TX, USA: ASME, 2015. p. 1-8. ISBN: 978-0-7918-5750-2.
Detail

ZELENÝ, M.; STRAKA, L.; SOZINOV, A. Ab initio study of Ni2MnGa under shear deformation. In ESOMAT 2015 – 10th European Symposium on Martensitic Transformations. MATEC Web of Conferences. EDP Sciences, 2015. p. 05006-1 (05006-6 p.)ISBN: 978-2-7598-1925-6. ISSN: 2261-236X.
Detail

KOUTNÍK, T.; DOUPNÍK, P. Validation Task for Solution of Optimal Slotted Flap Position Using FLUENT Software. Applied Mechanics and Materials, 2015, vol. 821, no. 821, p. 10-15. ISSN: 1662-7482.
Detail

MUKHAMETZIANOVA, L.; KOTEK, L.; DOHNAL, M. Qualitative model of performance shaping factors in HRA. MM Science Journal, 2015, vol. 2015, no. 4, p. 731-734. ISSN: 1803-1269.
Detail

VOTAVOVÁ, H.; POHANKA, M. Study of Overlapping Area of High Pressure Flat Water Jets Used for Hydraulic Descaling. In Ph.D. Workshop 2015 Proceedings. Ostrava: Ediční středisko VŠB - TU Ostrava, 2015. p. 24-24. ISBN: 978-80-86407-62-3.
Detail

VOPAŘIL, J.; DRÁPAL, L. Optimisation of Crankshaft Webs. In Transport Means 2015: Proceeding of the 19th International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2015. p. 448-452. ISBN: 9955-09-935-6. ISSN: 1822-296X.
Detail

ZAPLETAL, J.; DOLEŽAL, P.; FINTOVÁ, S. STRUCTURE ANDMECHANICAL PROPERTIES OF QE22 MAGNESIUM ALLOY AND QE22 MAGNESIUM ALLOY BASED HYBRID COMPOSITE. Žilina: Žilinská univerzita, 2015. p. 1-5.
Detail

KRACÍK, P.; ŠNAJDÁREK, L.; LISÝ, M.; BALÁŠ, M.; POSPÍŠIL, J. Correlation of Heat Transfer Coefficient at Sprinkled Tube Bundle. Materiali in tehnologije, 2016, vol. 50, no. 4, p. 479-483. ISSN: 1580-2949.
Detail

KRACÍK, P.; LISÝ, M.; BALÁŠ, M.; POSPÍŠIL, J. The Size Effect of Heat-Transfer Surfaces on Boiling. Materiali in tehnologije, 2016, vol. 50, no. 6, p. 939-944. ISSN: 1580-2949.
Detail

VÁLKA, L.; DLOUHÝ, I. Vliv metalurgie na tranzitní lomové chování vysoce pevných konstrukcních ocelí. Slévárenství, 2015, roč. 63, č. 11-12, s. 422-426. ISSN: 0037-6825.
Detail

ZHÁŇAL, L., PORTEŠ, P. NUMERICAL SIMULATION OF BODY MOVEMENTS. Perners' Contacts, 2015, vol. X, no. 4, p. 107-112. ISSN: 1801-674X.
Detail

PROKOP, A.; ŘEHÁK, K.; ZUBÍK, M.; NOVOTNÝ, P. Experimental Validation of the Gearbox NVH Parameters. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 2, p. 16-21. ISSN: 1214-0821.
Detail

MARŠÁLEK, O.; DLUGOŠ, J.; RAFFAI, P.; NOVOTNÝ, P.; KNOTEK, J. Experimental Determination of Contact Area. Tribology in Industry, 2015, vol. 37, no. 4, p. 427-433. ISSN: 0354-8996.
Detail

MARŠÁLEK, O.; VOPAŘIL, J.; NOVOTNÝ, P. Validation of Analytical Calculation of Contact Pressure. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. Switzerland: Springer International Publishing, 2015. p. 495-500. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
Detail

MARŠÁLEK, O.; DLUGOŠ, J.; NOVOTNÝ, P.; ZHÁŇAL, L. Contact Area Evaluation Experiment Verified by Computational Model in MBS. In Advanced Mechatronics Solutions. Advances in Intelligent Systems and Computing. Switzerland: Springer International Publishing, 2015. p. 489-494. ISBN: 978-3-319-23921-7. ISSN: 2194-5357.
Detail

ŠTĚPÁNEK, R.; PANTĚLEJEV, L. Changes in mechanical properties of as-cast magnesium alloy AZ91 after equal channel angular pressing. Materials Engineering - Materiálové inžinierstvo (online version), 2015, vol. 22, no. 4, p. 160-165. ISSN: 1338-6174.
Detail

LISÝ, M.; BALÁŠ, M.; ŠPILÁČEK, M.; SKÁLA, Z. OPERATING SPECIFICATIONS OF CATALYTIC CLEANING OF GAS FROM BIOMASS GASIFICATION. Acta Polytechnica, 2015, vol. 55, no. 6, p. 401-406. ISSN: 1210-2709.
Detail

FIŠER, J.; FOJTLÍN, M.; JÍCHA, M. Repeated determination of convective and radiative heat transfer coefficients using 32 zones thermal manikin. Proceedings of the 16th International Conference on Environmental Ergonomics. Portsmouth, United Kingdom: International Society for Environmental Ergonomics, 2015. p. 180-180. ISBN: 978 1 86137 656 5.
Detail

CALETKA, P.; PECH, O.; JEDELSKÝ, J.; LÍZAL, F.; JÍCHA, M. Comparison of methods for flow border detection in images of smoke visualization. In EPJ Web of Conferences. EPJ Web of Conferences. Francie: EDP Sciences, 2016. p. 1-4. ISSN: 2100-014X.
Detail

LISÝ, M.; BALÁŠ, M.; ŠPILÁČEK, M.; SKÁLA, Z. Comparison of Atmospheric Fluid Bed Gasification of Woody and Non-woody Biomass Fuels. In Mathematical and Computitational Methods in Electrical Engineering. 53. Sliema, Malta: WSEAS Press, 2015. p. 44-49. ISBN: 978-1-61804-329-0.
Detail

POSPÍŠIL, J.; ŠPILÁČEK, M.; LISÝ, M. Air Pollution Dispersion in Segments of Urban Areas. WSEAS Journal Transactions on Environment and Development, 2015, vol. 11, no. 2015, p. 237-245. ISSN: 1790-5079.
Detail

HARTL, M.; KŘUPKA, I.; OMASTA, M.; ŠPERKA, P. RECENT ADVANCES AND PROBLEMS IN LUBRICATED HERTZIAN CONTACTS. In ENGINEERING MECHANICS 2014. Engineering Mechanics .... Engineering Mechanics. Svratka, Česká Republika.: Czech Society for Mechanics, 2014. p. 34-37. ISBN: 978-80-214-4871-1. ISSN: 1805-8248.
Detail

MAZAL, P.; VLAŠIC, F.; KOULA, V. Use of acoustic emission method for identification of fatigue micro-cracks creation. Procedia Engineering, 2015, vol. 133, no. 1, p. 379-388. ISSN: 1877-7058.
Detail

GALAS, R.; OMASTA, M. The Effect of Friction Modifier on the Wheel- Rail Contact. In The Latest Methods of Construction Design. Springer International Publishing, 2016. p. 133-138. ISBN: 978-3-319-22761-0.
Detail

NEČAS, D.; VRBKA, M.; YARIMITSU, S.; NAKASHIMA, K.; SAWAE, Y.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Frictional properties of PVA hydrogel. In The Latest Methods of Construction Design. Springer International Publishing, 2016. p. 159-164. ISBN: 978-3-319-22761-0.
Detail

PANTĚLEJEV, L.; ŠTĚPÁNEK, R. Influence of microstructure on mechanical properties of magnesium alloy AZ91. Konštrukčné materiály 2015. Žilina, Slovenská republika: Žilinská universita, Slovenská republika, 2015. p. - (- p.)
Detail

ŠUBRT, K.; HOUŠKA, P.; KNOFLÍČEK, R. Comparison of energy efficiency of the redundant actuation of positioning axes. Applied Mechanics and Materials, 2015, no. 821, p. 620-625. ISSN: 1660-9336.
Detail

MORAVČÍK, I.; ČÍŽEK, J.; HRYHA,E.; DLOUHÝ, I. Preparation of AlCoCrFeNiTi0.5 High Entropy Alloy by SPS from Mechanically Alloyed Powders. In EURO PM 2015 Proceedings. Reims France: European powder metallurgy association, 2015. p. 1-6. ISBN: 978-1-899072-47-7.
Detail

PANTĚLEJEV, L.; KOUTNÝ, D.; PALOUŠEK, D.; KAISER, J. Mechanical properties and microstructure of Al-Cu alloy processed by SLM. Konštrukčné materiály 2015. Žilina, Slovenská republika: Žilinská universita, Slovenská Republika, 2015. p. - (- p.)
Detail

KOTRBÁČEK, P.; HORSKÝ, J.; Parilák, L.; Ma´tas, P.; Zalaba, D. Vysoce účinné a energeticky úsporné chladicí systémy pro chlazení profilových válců. Zváranie - Svařování, 2015, roč. 5-6, č. 64, s. 135-139. ISSN: 0044-5525.
Detail

HANUSOVÁ, P.; PÁLENÍKOVÁ, L.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND PHASES MODIFICATIONS OF BI – METALLIC MATERIALS. In Advances in Powder Metallurgy & Particulate Materials—2015. Princeton, New Jersey: Metal Powder Industries Federation, 2015. p. 53-61. ISBN: 978-1-943694-01-3.
Detail

CHARVÁT, P.; KLIMEŠ, L.; OSTRÝ, M.; ŠTĚTINA, J. A VALIDATED TRNSYS MODEL OF THERMALLY ACTIVATED LAYER WITH PHASE CHANGE MATERIAL. In ASME 2015 International Mechanical Engineering Congress and Exposition Volume 8A: Heat Transfer and Thermal Engineering. Houston, Texas, USA: ASME, 2015. p. 1-4. ISBN: 978-0-7918-5749-6.
Detail

MORAVČÍK, I.; ČÍŽEK, J.; GAVENDOVÁ, P.; DLOUHÝ, I. INFLUENCE OF SINTERING TEMPERATURE ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HIGH ENTROPY ALLOY ALCOCRFENITI0,5. Konštrukčné materiály 2015. Žilina: Zilinská univerzita, 2015. p. 10-15.
Detail

POSPÍŠIL, J.; ŠPILÁČEK, M.; LISÝ, M. Modeling of Pollutant Dispersion Released from Line Source in Small Urban Areas. In Mathematical and Computational Methods in Electrical Engineering. WSEAS Applied Informatics & Communications. 2015. Sliema, Malta: WSEAS PRESS, 2015. p. 63-69. ISBN: 978-1-61804-329-0. ISSN: 1790-5117.
Detail

ČÍŽEK, J.; MATĚJKOVÁ, M.; KOUŘIL, J.; ČUPERA, J.; DLOUHÝ, I. Potential of New-Generation Electron Beam Technology in Interface Modification of Cold and HVOF Sprayed MCrAlY Bond Coats. Advances in Materials Science and Engineering, 2016, vol. N/A, no. N/A, p. 1-6. ISSN: 1687-8434.
Detail

ČÍŽEK, J.; SEINER, H.; HUANG, R.; LANDA, M.; DLOUHÝ, I. Elastic Isotropy of Cold Sprayed Coatings. In International Thermal Spray Conference 2015 Proceedings. Long Beach, USA: ASM International, 2015. p. 353-356. ISBN: 978-1-62708-093-4.
Detail

ČÍŽEK, J.; SEINER, H.; HUANG, R.; LANDA, M.; DLOUHÝ, I. Elastic Isotropy of Cold Sprayed Coatings. In International Conference of Engineering Against Failure. Skiathos, Řecko: University of Patras, 2015. p. 401-406. ISBN: 978-960-88104-5-7.
Detail

ČÍŽEK, J.; SEINER, H.; HUANG, R.; LANDA, M.; DLOUHÝ, I. Elastic Isotropy of Cold Sprayed Coatings. Limoges: University of Limoges, 2015. p. 1-16.
Detail

VÁLKA, L. The influence of impurity level on fracture behaviour of high strength structural steels. Žilina, Slovensko: Katedra materiálového inžinierstva, SF Žilinskej Univerzity v Žilině, 2015.
Detail

POSPÍŠIL, J.; LISÝ, M.; ŠPILÁČEK, M. Mixing of flu-gas stream by local acceleration in channel of biomass boiler. In Reacent Advances in Environmental and Earth Sciences and Economic. Energy, Environmental and Structural Engineering. 1. Zakyntos, Řecko: WSEAS Press, 2015. p. 345-350. ISBN: 978-1-61804-324-5. ISSN: 2227-4359.
Detail

DYČKA, M.; JAN, V.; ČUPERA, J.; ČÍŽEK, J. HEAT TREATMENT OF HYPO-EUTECTOID NITI ALLOY MANUFACTURED BY CGDS POWDER MIX DEPOSITION. In Metal 2015. Ostrava: Tanger, 2015. p. 147-154. ISBN: 978-80-87294-58-1.
Detail

PÁLENÍKOVÁ, L.; JAN, V.; ČUPERA, J.; ČÍŽEK, J. PHASE AND THERMAL ANALYSIS OF MICROSTRUCTURE EVOLUTION OF BI – METALLIC MATERIALS DURING HEAT TREATEMENT. In Metal 2015. 2015. p. 157-166. ISBN: 978-80-87294-58-1.
Detail

JANÁK, L.; HADAŠ, Z. Machine Tool Health and Usage Monitoring System: An Initial Analyses. MM Science Journal, 2015, vol. 2015, no. December, p. 794-798. ISSN: 1803-1269.
Detail

KUČERA, P.; PÍŠTĚK, V. A Computational Model of ATV Vehicle for Real-Time Simulation. In Engineering Mechanics 2015. Applied Mechanics and Materials. 2016. p. 242-247. ISBN: 978-3-03835-700-1. ISSN: 1662-7482.
Detail

BROŽOVÁ, T.; LUKS, T.; ASTROUSKI, I.; RAUDENSKÝ, M. Fatigue Testing of Polymeric Hollow Fibre Heat Transfer Surfaces by Pulsating Pressure Loads. In Engineering Mechanics 2015. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016. p. 3-9. ISBN: 978-3-03835-700-1. ISSN: 1660-9336.
Detail

Michal Kotoul. Crack path modelling in railway wheel under rolling contact fatigue. Applied andComputational Mechanics, 2015, vol. 9, no. 2, p. 103-126. ISSN: 1802-680X.
Detail

ANDRŠ, O.; VETIŠKA, J.; HOLUB, M.; KOVÁŘ, J. Model Based Design of Fuel Pump Control. Applied Mechanics and Materials, 2016, vol. 2016, no. 821, p. 601-607. ISSN: 1662-7482.
Detail

GAVENDOVÁ, P.; ČÍŽEK, J.; ČUPERA, J.; HASEGAWA, M.; DLOUHÝ, I. Microstructure modification of CGDS and HVOF sprayed CoNiCrAlY bond coat remelted by electron beam. New Methods of Damage and Failure Analysis of Structural Parts. VŠB-TU Ostrava. Ostrava: Vydavatelství VŠB-TU Ostrava, 2014. p. 119-120. ISBN: 978-80-248-3488-7.
Detail

AUGSTE, J.; HOLUB, M.; KNOFLÍČEK, R. Tools for Visualization of Active Power and Energy at Machine Tools. In Mechatronic systems and materials 2014, Selected papers. Opole, Poland: Oficyna Wydaw. Politechniki Opolskiej, 2014. p. 11-16. ISBN: 978-83-65235-06-0.
Detail

ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Verification of Ductile Fracture Criteria Based On Selected Calibration Tests. In Engineering Mechanics 2015. Applied Mechanics and Materials. 2016. p. 450-455. ISBN: 978-3-03835-700-1. ISSN: 1662-7482.
Detail

MLKVIK, M.; ZAREMBA, M.; STÄHLE, P.; SCHUCHMANN, H.; GAUKEL, V.; JEDELSKÝ, J. Influence of the primary breakup conditions on the droplet size of the spray generated by twin fluid atomizers. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 91-96. ISSN: 1662-7482.
Detail

TRÁVNÍČEK, P.; KOTEK, L.; JUNGA, P. Bezpečnost bioplynových stanic. Journal of Safety Research and Applications (JOSRA), 2015, roč. 2015, č. 4, s. 7-14. ISSN: 1803-3687.
Detail

GAVENDOVÁ, P.; PETRYSHYNETS, I.; SOPKO, M.; KOVÁČ, F. Dependence of Grains Hardness on their Orientation in Electrical Steels. In METAL 2014. 1. Brno: TANGER Ltd., 2014. p. - (- p.)ISBN: 978-80-87294-54-3.
Detail

JANHUBA, L. Standard and Future-Potential Methods for Safety and Reliability Assessment Illustrated by an Airborne Electric System Example. AVIATION, 2016, vol. 19, no. 4, p. 180-186. ISSN: 1648-7788.
Detail

KOŠŤÁL, D.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Relationship between Thickness of Entering Layer and Level of EHL Contact Starvation. In Tribology - Industrial and Automotive Lubrication. Esslingen (Germany): Techniosche Akademie Esslingen e.V., 2016. p. 120-120. ISBN: 978-3-943563-23-8.
Detail

DVOŘÁK, P. Surrogate-based Shape Optimization in Aerodynamic Applications. Letecký zpravodaj, 2015, vol. 2015, no. 3, p. 5-10. ISSN: 1211-877X.
Detail

KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; DLUGOŠ, J. The Influence of rotor unbalance on turbocharger rotor dynamics. MECCA - Journal of Middle European Costruction and Design of Cars, 2015, vol. 2015, no. 3, p. 8-13. ISSN: 1214-0821.
Detail

KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O. Multibody Based Tool for Simulation of the Turbocharger Rotor Dynamics. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 229-235. ISSN: 1662-7482.
Detail

Müllerová, J., Brůna, J., DVOŘÁK, P., Pyšek, P., Bartaloš, T., Pergl, J. Remote sensing in invasive ecology? Detection, monitoring and control of alien plant species. In 58th Annual Symposium of the International Association for Vegetation Science. MU Conference proceedings. Brno: Masaryk University, 2015. p. 268-268. ISBN: 978-80-210-7860-4.
Detail

MARŠÁLEK, O.; NOVOTNÝ, P.; KNOTEK, J. Numerical Solution of Micro-lubrication in Internal Combustion Engine Journal Bearing. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 159-166. ISSN: 1662-7482.
Detail

SVĚRÁK, T.; BULEJKO, P.; KEJÍK, P.; MAYEROVÁ, K.; KRIŠTOF, O.; RAUDENSKÝ, M. Bulk properties of surface treated limestone powders. In Conference Proceedings 1st International Conference on Applied Mineralogy & Advanced Materials – AMAM2015. Conference Proceedings 1st International Conference on Applied Mineralogy & Advanced Materials – AMAM2015. Digilabs S.a.s., 2015. p. 71-76. ISSN: 2283-5954.
Detail

Brůna, J., Müllerová, J., DVOŘÁK, P., Bartaloš, P. Detekce a monitoring invazních druhů pomocí bezpilotního systému. In Praktické využití GIS v lesnictví a zemědělství. MendelU conference proceedings. Brno: MendelU, 2015. s. 1-15. ISBN: 978-80-7509-250-2.
Detail

TOUŠ, M.; PAVLAS, M.; PUTNA, O.; STEHLÍK, P.; CRHA, L. Combined heat and power production planning in a waste-to-energy plant on a short-term basis. Energy, 2015, no. 90, p. 137-147. ISSN: 0360-5442.
Detail

ŠMÍD, M.; HORNÍK, V.; HUTAŘ, P.; KUNZ, L.; HRBÁČEK, K. High Cycle Fatigue Damage Mechanisms of MAR-M 247 Superalloy at High Temperatures. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, vol. 69, no. 2, p. 393-397. ISSN: 0972-2815.
Detail

HEJTMÁNEK, P.; BLAŤÁK, O.; VANČURA, J. New Approach to Measure the Vehicle Centre of Gravity Height. Perners' Contacts, 2015, vol. X, no. 4, p. 18-27. ISSN: 1801-674X.
Detail

MAUDER, T.; ŠTĚTINA, J. IMPROVEMENT OF THE CASTING OF SPECIAL STEEL WITH A WIDE SOLID-LIQUID INTERFACE. Materiali in tehnologije, 2016, vol. 50, no. 1, p. 3-6. ISSN: 1580-2949.
Detail

BĚLKA, M.; LÍZAL, F.; JEDELSKÝ, J.; ŠTARHA, P.; DRUCKMÜLLEROVÁ, H.; JÍCHA, M. Application of image analysis method to detection and counting of glass fibers from filter samples. AEROSOL SCIENCE AND TECHNOLOGY, 2016, vol. 50, no. 4, p. 352-363. ISSN: 0278-6826.
Detail

POCHYLÝ, F.; STEJSKAL, J. Rotational Flow in Centrifugal Pump Meridian Using Curvilinear Coordinates. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2016, vol. 138, no. 8, p. 1765-1770. ISSN: 0098-2202.
Detail

NOVOTNÝ, P.; PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K. Investigating the influence of computational model complexity on noise and vibration modeling of powertrain. Journal of Vibroengineering, 2016, vol. 18, no. 1, p. 378-393. ISSN: 1392-8716.
Detail

KRACÍK, P.; POSPÍŠIL, J. Influence of Underpressure on Heat Transfer And Temperature Field at Sprinkled Tube Bundle. Applied Mechanics and Materials, 2016, no. 832, p. 200-206. ISSN: 1662-7482.
Detail

PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F. Novel approach to computational simulation of cross roll straightening of bars. Journal of Materials Processing Technology, 2016, vol. 233, no. 7, p. 53-67. ISSN: 0924-0136.
Detail

HRABOVSKÝ, J.; POHANKA, M.; LEE,P.J.; KANG, J.H. Experimental and numerical study of hot-steel-plate flatness. Materiali in tehnologije, 2016, vol. 50, no. 1, p. 17-21. ISSN: 1580-2949.
Detail

TRÁVNÍČEK, P.; KOTEK, L.; JUNGA, P. Environmental risk assessment of a biogas station. PROCESS SAFETY PROGRESS, 2016, vol. 35, no. 4, p. 360-364. ISSN: 1066-8527.
Detail

SEINER, H.; ČÍŽEK, J.; SEDLÁK, P.; HUANG, R.; ČUPERA, J.; DLOUHÝ, I.; LANDA, M. Elastic moduli and elastic anisotropy of cold sprayed metallic coatings. Surface and Coatings Technology, 2016, vol. 291, no. N/A, p. 342-347. ISSN: 0257-8972.
Detail

RAFFAI, P.; NOVOTNÝ, P.; DLUGOŠ, J. Computer Simulation of the Behavior of the Piston Ring Pack of Internal Combustion Engines. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 166-171. ISSN: 1662-7482.
Detail

DLUGOŠ, J.; NOVOTNÝ, P.; RAFFAI, P. Advanced Computational Analysis of Connecting Rod of an Aircraft Engine. Applied Mechanics and Materials, 2016, vol. 821, no. 1, p. 199-206. ISSN: 1662-7482.
Detail

BALÁŠ, M.; LISÝ, M.; POSPÍŠIL, J. Steam Biomass Gasification - Effect of Temperature. Applied Mechanics and Materials, 2016, no. 832, p. 49-54. ISSN: 1662-7482.
Detail

LISÝ, M.; POSPÍŠIL, J.; ŠTELCL, O.; ŠPILÁČEK, M. Optimization of Secondary Air Distribution in Biomass Boiler by CFD Analysis. Applied Mechanics and Materials, 2016, vol. 832, no. 1, p. 231-237. ISSN: 1662-7482.
Detail

SKÁCEL, P.; BURŠA, J. Poisson's ratio of arterial wall – inconsistency of constitutive models with experimental data. Journal of the mechanical behavior of biomedical materials, 2016, vol. 54, no. 1, p. 316-327. ISSN: 1751-6161.
Detail

STRÁNSKÝ, K.; JANOVÁ, D.; KAVIČKA, F.; PANTĚLEJEV, L.; SPOTZ, Z.; STRÁNSKÝ, L.; SEKANINA, B.; STRÁNSKÝ, K.; POČTA, J. K historii těžby a zpracování stříbronosných a zlatonosných rud v Jílovém u Prahy a v některých dalších vybraných lokalitách. Hutnické listy, 2016, roč. LXIX (2016, č. 1, s. 28-32. ISSN: 0018-8069.
Detail

KNOTEK, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; DLUGOŠ, J. Influence of Turbine and Compressor Wheel Mass and Inertia on the Rotor Dynamics of Turbocharger. Tribology in Industry, 2016, vol. 38, no. 1, p. 24-32. ISSN: 0354-8996.
Detail

BUZÍK, J.; LÉTAL, T.; JEGLA, Z. Vibrace vyvolané prouděním tekutiny a jejich hodnocení. In Sborník konference Kotle a energetická zařízení 2016. Kotle a energetická zařízení. 2016. s. 443-455. ISSN: 1804-6673.
Detail

JIRÁSEK, A.; DALENBRING, M.; NAVRÁTIL, J. Numerical Study of Benchmark Super-Critical Wing, BSCW, at Flutter Condition. In 54th AIAA Aerospace Sciences Meeting. AIAA, 2016. p. 1-11. ISBN: 978-1-62410-393-3.
Detail

BRUMMER, V.; JECHA, D.; OSIČKA, T.; LEŠTINSKÝ, P. Měření kinetiky oxidace VOC na poškozeném sypaném katalyzátoru Pt-Pd/Al2O3. In TVIP 2016. Hustopeče: CEMC, 2016. s. 113-1 (113-9 s.)ISBN: 978-80-85990-28-7.
Detail

KOMÍNEK, J.; POHANKA, M. Estimation of the Number of Forward Time Steps for the Sequential Beck Approach Used for Solving Inverse Heat Conduction Problems. Materiali in tehnologije, 2016, vol. 50, no. 2, p. 207-210. ISSN: 1580-2949.
Detail

DVOŘÁČEK, J.; KOMENDA, L.; NOHÁL, L. Modification of Experimental Station AXMAT. In The Latest Methods of Construction Design. 2016. Springer International Publishing, 2016. p. 319-323. ISBN: 978-3-319-22761-0.
Detail

POHANKA, M.; ONDROUŠKOVÁ, J. Implicit numerical multidimensional heat-conduction algorithm parallelization and acceleration on a graphics card. Materiali in tehnologije, 2016, vol. 50, no. 2, p. 183-187. ISSN: 1580-2949.
Detail

MORAVČÍK, I.; HANUSOVÁ, P.; ČUPERA, J.; DLOUHÝ, I. EFFECT OF MILLING AGENT (METHANOL) ON PHASE COMPOSITION AND STRUCTURE OF ALCOCRFENITI0,5 HIGH ENTROPY ALLOY POWDERS. Materials Engineering - Materiálové inžinierstvo (online version), 2016, vol. 23, no. 4, p. 20-26. ISSN: 1338-6174.
Detail

MORAVČÍK, I.; ČÍŽEK, J.; GAVENDOVÁ, P.; SHEIKH, S.; GUO, S.; DLOUHÝ, I. Effect of heat treatment on microstructure and mechanical properties of spark plasma sintered AlCoCrFeNiTi0.5 high entropy alloy. MATERIALS LETTERS, 2016, vol. 174, no. 1, p. 53-56. ISSN: 0167-577X.
Detail

NEVRLÝ, V.; POPELA, P.; PAVLAS, M.; ŠOMPLÁK, R. Heuristic for generation of waste transportation test networks. Mendel Journal series, 2015, vol. 2015, no. 1, p. 189-194. ISSN: 1803-3814.
Detail

FOJTLÍN, M.; PLANKA, M.; FIŠER, J.; POKORNÝ, J.; JÍCHA, M. Airflow Measurement of the Car HVAC Unit Using Hot-wire Anemometry. EPJ Web of Conferences, 2016, vol. 114, no. 2016, p. 173-178. ISSN: 2100-014X.
Detail

POKORNÝ, J.; POLÁČEK, F.; FOJTLÍN, M.; FIŠER, J.; JÍCHA, M. Measurement of airflow and pressure characteristics of a fan built in a car ventilation system. EPJ Web of Conferences, 2016, vol. 114, no. 2016, p. 644-647. ISSN: 2100-014X.
Detail

KOUTNÍK, T. Wing Geometry Design Using Glauert’s Method. Engineering mechanics 2015 - Extended abstracts. 21st International conference May 11-14, 2015, Svratka, Czech Republic. Extended abstracts. Česká republika: Academy of Sciences of the Czech Republic, v.v.i., 2015. p. 150-151. ISBN: 978-80-86246-42-0.
Detail

KOUTNÍK, T. Wing Geometry Design Using Glauert’s Method. Svratka, ČR: 2015.
Detail

DOUPNÍK, P.; KOUTNÍK, T. Validation Task for Solution of Optimal Slotted Flap Position Using FLUENT Software. Svratka, ČR: 2015.
Detail

NOVOTNÝ, J.; BRANDA, M.; POPELA, P.; OLSTAD, A. A Note on Fixed Interval Scheduling with Stochastic Elements. Informacní Bulletin Ceské Statistické spolecnosti, 2015, vol. 26, no. 4, p. 1-7. ISSN: 1210-8022.
Detail

TSENG, A.; RAUDENSKÝ, M.; LEE, T-W. Liquid Sprays for Heat Transfer Enhancements: A Review. Heat Transfer Engineering, 2016, vol. 37, no. 16, p. 1-60. ISSN: 0145-7632.
Detail

FOJTLÍN, M.; FIŠER, J.; JÍCHA, M. Determination of convective and radiative heat transfer coefficients using 34-zones thermal manikin: Uncertainty and reproducibility evaluation. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2016, vol. 77, no. 2016, p. 257-264. ISSN: 0894-1777.
Detail

HAUGEN, K.; POPELA, P. Why sports officials may choose not to fight performance-enhancing drugs. European Journal of Sport Studies, 2015, vol. 3, no. 2, p. 1-8. ISSN: 2282-5673.
Detail

NEVRLÝ, J.; BRANDEJS, J. METHODOLOGY OF HYDRAULIC SYSTEM DEVELOPMENT USING EXPERIMENTAL STAND AND COMPUTER MODELING. MM Science Journal, 2016, no. 3, p. 882-886. ISSN: 1803-1269.
Detail

HORÁK, M.; PÍŠTĚK, A. Shear strength of thin web – influence of lighting openings and diagonal tension. AVIATION, 2016, vol. 20, no. 1, p. 8-13. ISSN: 1648-7788.
Detail

HAVLÁSEK, M.; MÁŠA, V. Využívání nízkopotenciálního odpadního tepla v průmyslu. Energetika, 2016, č. 4/2016, s. 114-119. ISSN: 0375-8842.
Detail

ZAREMBA, M.; MALÝ, M.; JEDELSKÝ, J.; JÍCHA, M. Comparison of different configurations of Phase Doppler Analyser. In EPJ Web of Conferences. EPJ Web of Conferences. EDP Sciences, 2016. p. 519-523. ISSN: 2100-014X.
Detail

MOURALOVÁ, K.; BEDNÁŘ, J.; KOVÁŘ, J.; MACH, J. Evaluation of MRR after WEDM depending on the resulting surface. Manufacturing TECHNOLOGY, 2016, vol. 2016, no. 2, p. 396-401. ISSN: 1213-2489.
Detail

KUČERA, P.; PÍŠTĚK, V.; PORTEŠ, P. AUTOMATICKÉ ŘÍZENÍ UZAVÍRÁNÍ DIFERENCIÁLU NÁKLADNÍHO VOZIDLA PŘI JÍZDĚ PŘÍMÝM SMĚREM. Perners' Contacts, 2016, roč. XI, č. 1, s. 115-121. ISSN: 1801-674X.
Detail

RANUŠA, M.; GALLO, J.; VRBKA, M.; HOBZA, M.; PALOUŠEK, D.; KŘUPKA, I.; HARTL, M. Wear Analysis of Extracted Polyethylene Acetabular Cups Using a 3D Optical Scanner. TRIBOLOGY TRANSACTIONS, 2016, vol. 60, no. 3, p. 437-447. ISSN: 1040-2004.
Detail

KUČERA, P.; PÍŠTĚK, V.; PORTEŠ, P. AUTOMATIC DIFFERENTIAL LOCK CONTROL IN A TRUCK – STRAIGHT DRIVE. In Engineering Mechanics 2016. 1. Prague: Institute of Thermomechanics Academy of Sciences of the Czech Republic, 2016. p. 334-337. ISBN: 978-80-87012-59-8.
Detail

BUZÍK, J.; LÉTAL, T.; JEGLA, Z. Vibrace vyvolané prouděním tekutiny a jejich hodnocení. All for Power, 2016, roč. 10, č. 2, s. 112-113. ISSN: 1802-8535.
Detail

POCHYLÝ, F.; HUDEC, M.; HABÁN, V.; RUDOLF, P. Spolupráce na projektu unikátní vírové turbíny. Energie-21, 2016, č. 2/2016, s. 36-37. ISSN: 1803-0394.
Detail

TUHOVČÁK, J.; HEJČÍK, J.; JÍCHA, M. Comparison of heat transfer models for reciprocating compressor. Applied Thermal Engineering, 2016, vol. 103, no. 1, p. 607-615. ISSN: 1359-4311.
Detail

PEČ, M.; KUBÍK, P.; ŠEBEK, F.; NÁVRAT, T.; PETRUŠKA, J. Modeling of the blast load effects in explicit dynamics. In Engineering Mechanics 2016. 2016. p. 442-445. ISBN: 978-80-87012-59-8.
Detail

RAUDENSKÝ, M.; HORSKÝ, J.; HRABOVSKÝ, J.; KOTRBÁČEK, P.; POHANKA, M. Mechanical Properties of Oxidized Steel Samples by Small Punch Test. Hutnické listy, 2016, vol. 69, no. 2, p. 10-16. ISSN: 0018-8069.
Detail

PÍŠKA, M. Lze zastavit časový rozvoj opotřebení řezných nástrojů?. MM Průmyslové spektrum, 2016, roč. 2016, č. 5, s. 70-71. ISSN: 1212-2572.
Detail

HORSKÝ, J.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; KOTRBÁČEK, P. In-line heat treatment of flat products. In Proceedings European Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, 11 – 13 May 2016, Prague, Czech Republic. Čerčany: Asociace pro tepelné zpracování kovů, 2016. p. 1-8. ISBN: 978-80-904462-9-8.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Application of the genetic algorithm for analysis of input parameters of WEDM technology for TI-6AL-4V. Mendel Journal series, 2016, vol. 2016, no. 22, p. 271-274. ISSN: 1803-3814.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Experimental statistical evaluation of S-parameters on surface machined using WEDM. Mendel Journal series, 2016, vol. 2016, no. 22, p. 261-264. ISSN: 1803-3814.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Experimental statistical evaluation of surface waviness machined using WEDM. Mendel Journal series, 2016, vol. 2016, no. 22, p. 275-280. ISSN: 1803-3814.
Detail

ŠTĚTINA, J.; MAUDER, T.; KLIMEŠ, L. Utilization of Non-linear Model Predictive Control to Secondary Cooling during Dynamic Variations. In AISTech 2016 Proceedings. 1. Pittsburgh, PA, USA: AIST, 2016. p. 1517-1530. ISBN: 9781935117551.
Detail

BRUMMER, V.; JECHA, D.; STEHLÍK, P. Měření kinetiky oxidace VOC na poškozeném sypaném katalyzátoru Pt-Pd/Al2O3. Waste forum, 2016, roč. 2016, č. 1, s. 38-46. ISSN: 1804-0195.
Detail

BRUMMER, V.; JECHA, D.; LEŠTINSKÝ, P.; SKRYJA, P.; GREGOR, J.; STEHLÍK, P. The treatment of waste gas from fertilizer production - An industrial case study of long term removing particulate matter with a pilot unit. POWDER TECHNOLOGY, 2016, vol. 2016, no. 297, p. 374-383. ISSN: 0032-5910.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T.; BEDNÁŘ, J.; MATOUŠEK, R.; KLAKURKOVÁ, L. Statistical evaluation width of kerf after WEDM by Analysis of Variance. Mendel Journal series, 2016, vol. 2016, no. 22, p. 301-304. ISSN: 1803-3814.
Detail

KRACÍK, P.; POSPÍŠIL, J. Development Boiling to Sprinkled Tube Bundle. EPJ Web of Conferences, 2016, vol. 114, no. 1, p. 1-7. ISSN: 2100-014X.
Detail

ŠLAPAL, J. Alexandroff pretopologies for structuring the digital plane. Discrete Applied Mathematics, 2017, vol. 216, no. 2, p. 323-334. ISSN: 0166-218X.
Detail

STRÁNSKÝ, K.; JANOVÁ, D.; KAVIČKA, F.; PANTĚLEJEV, L.; SPOTZ, Z.; SEKANINA, B. K možnostem analýz polymetalických rud a drahých kovů ve Švařci a v okolí Štěpánova nad Svratkou. Slévárenství, 2016, roč. LXIV (2016, č. 3-4, s. 142-144. ISSN: 0037-6825.
Detail

STRÁNSKÝ, K.; JANOVÁ, D.; KAVIČKA, F.; PANTĚLEJEV, L.; STRÁNSKÝ, K.; SPOTZ, Z.; STRÁNSKÝ, L.; SEKANINA, B.; POČTA, J. K historii těžby a zpracování stříbronosných a zlatonosných rud v Jílovém u Prahy a v některých dalších vybraných lokalitách (2). Hutnické listy, 2016, roč. LXIX (2016, č. 2, s. 36-41. ISSN: 0018-8069.
Detail

ŠTĚTINA, J.; MAUDER, T.; KLIMEŠ, L. A COMPREHENSIVE REAL-TIME TOOL FOR SOLIDIFICATION, COOLING AND QUALITY CONTROL OF CONTINUOUS CASTING PROCESS. In Sborník konference METAL 2016. Brno: TANGER Ltd., 2016. p. 47-53. ISBN: 978-80-87294-67-3.
Detail

KOMÍNEK, J.; KOTRBÁČEK, P.; HORSKÝ, J. DESIGN OF COOLING SYSTEMS FOR GROOVED ROLLS. In METAL 2016, 25rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2016. p. 255-260. ISBN: 978-80-87294-67-3.
Detail

BROŽOVÁ, T.; CHABIČOVSKÝ, M.; HORSKÝ, J. Influence of the surface roughness on the cooling intensity during spray cooling. In METAL 2016, 25rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2016. p. 41-46. ISBN: 978-80-87294-67-3.
Detail

GAVENDOVÁ, P.; ČÍŽEK, J.; ČUPERA, J.; HASEGAWA, M.; DLOUHÝ, I. Microstructure modification of CGDS and HVOF sprayed CoNiCrAlY bond coat remelted by electron beam. Procedia Materials Science, 2016, vol. 12, no. 1, p. 89-94. ISSN: 2211-8128.
Detail

HAVLÍK, P.; KOUŘIL, J.; FORET, R. Characterization of electron beam welds of precipitation hardened aluminum alloys. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS CONFERENCE PROCEEDINGS. Brno: Brno University of Technology, 2016. p. 50-58. ISBN: 978-80-214-5358-6.
Detail

HAVLÍK, P.; DLOUHÝ, I. Optimization of welding parameters of Ti6Al4V alloy using electron beam. Materials Engineering - Materiálové inžinierstvo (online version), 2016, vol. 23, no. 1, p. 11-19. ISSN: 1338-6174.
Detail

PANTĚLEJEV, L.; ŠTĚPÁNEK, R. Influence of processing on microstructure and mechanical properties of magnesium alloy AZ91. Materiálové inžinierstvo, 2016, vol. 23, no. 1, p. 27-32. ISSN: 1335-0803.
Detail

AL KHADDOUR, S.; STRATIL, L.; VÁLKA, L.; DLOUHÝ, I. Prediction of fracture toughness transition from tensile test data using artificial neural networks. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS - CONFERENCE PROCEEDINGS. Brno: Brno University of Technology, 2016. p. 79-86. ISBN: 978-80-214-5358-6.
Detail

VÁLKA, L.; DLOUHÝ, I. Fracture behaviour of weld joints made of pearlitic and bainitic steel. Materiálové inžinierstvo, 2016, vol. 23, no. 1, p. 33-42. ISSN: 1335-0803.
Detail

JAN, V.; MATĚJKOVÁ, M.; DLOUHÝ, I. USE OF COLD GAS DYNAMIC SPRAYING OF BI-METALLIC POWDER MIXTURES AS ALTERNATIVE TO CLASSIC POWDER METALLURGY ROUTE FOR PRODUCING INTERMETALLIC MATERIALS. Materiálové inžinierstvo, 2016, vol. 2016, no. 23, p. 1-10. ISSN: 1335-0803.
Detail

HADAŠ, Z.; VETIŠKA, V.; VETIŠKA, J.; KREJSA, J. Analysis and efficiency measurement of electromagnetic vibration energy harvesting system. Microsystem Technologies, 2016, vol. 22, no. 7, p. 1767-1779. ISSN: 0946-7076.
Detail

MATĚJŮ, J.; ZIKMUND, P. WING TIP VORTEX RANS AND LES SIMULATION AND MEASUREMENT OF THE MEAN CHARACTERISTICS. In ENGINEERING MECHANICS 2016. Engineering Mechanics .... 2016. p. 374-377. ISBN: 978-80-87012-59-8. ISSN: 1805-8248.
Detail

DLOUHÝ, I.; VÁLKA, L. Aplikovatelnost koncepce "master" křivky pro hodnocení lomové houževnatosti C-Mn oceli na odlitky. Slévárenství, 2016, roč. 64, č. 5-6, s. 167-172. ISSN: 0037-6825.
Detail

ŠTĚTINA, J.; MAUDER, T.; KLIMEŠ, L.; KAVIČKA, F. NUMERICAL MODELS AND THEIR INDISPENSABILITY FOR FLEXIBLE CONTROL OF CONTINUOUS STEEL CASTING. In METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015. p. 163-168. ISBN: 978-80-87294-62-8.
Detail

GUZEJ, M.; HORSKÝ, J. Experimental verifications and numerical thermal simulations of automobile lamps. Materiali in tehnologije, 2016, vol. 50, no. 3, p. 289-293. ISSN: 1580-2949.
Detail

KLIMEŠ, L.; MAUDER, T.; ŠTĚTINA, J. Comparison of regulation algorithms for secondary cooling of continuous casting process. In Proceedings of METAL 2015. Ostrava: TANGER Ostrava, s.r.o., 2015. p. 67-72. ISBN: 978-80-87294-62-8.
Detail

ŠTĚPÁNEK, R.; PANTĚLEJEV, L. Mechanical response of magnesium alloy AZ91 at elevated temperature. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS. 2016. p. 65-69. ISBN: 978-80-214-5358-6.
Detail

PAVLAS, M.; ŠOMPLÁK, R.; ZAVÍRALOVÁ, L.; STEHLÍK, P. Unique complex tools supporting decision/making in waste management. In Proceedings of 6th International Conference on Engineering for Waste and Biomass Valorisation (WasteEng 2016) Ed. Nzihou A. Albi, France: WasteEng2016 Conference, Albi Mines/ Carmaux, 2016. p. 1-15. ISBN: 979-10-91526-05-0.
Detail

MATLÁK, J.; DLOUHÝ, I. Flash electron beam welding of stainless steels 1.4510 and 1.4511. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS CONFERENCE PROCEEDINGS. 2016. p. 44-49. ISBN: 978-80-214-5358-6.
Detail

MATLÁK, J.; ŠIPULA, I.; ŠTRAUS, V.; DLOUHÝ, I. Flash electron beam welding of stainless steels 1.4510 and 1.4511. In Twelfth International Conference on Electron Beam Technologies. Elektrotechnica & Elektronica. 2016. p. 74-78. ISSN: 0861-4717.
Detail

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Surface Roughness Effects under High Sliding EHL Conditions. Tribology Online, 2016, vol. 11, no. 1, p. 34-39. ISSN: 1881-218X.
Detail

DONG, J.; SVOBODA, P.; KRUPKA, I.; DONG, H. Friction property of low temperature plasma carburised micro-patterning of AISI F-1537CoCrMo alloy. Malta: University of Malta Valletta Campus, St Paul Street, Valletta, Malta, 2016. p. 1 (1 s.).
Detail

MATLÁK, J.; DOLEŽAL, P.; ZAPLETAL, J.; DLOUHÝ, I. Local electron beam heat treatment of forging dies. In Proceedings European Conferenceon Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications. 2016. p. 1-10. ISBN: 978-80-904462-9-8.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; BENEŠ, L.; OSIČKA, K. Effect of wirefeed rate on the morphology of a surface machined using WEDM. Manufacturing TECHNOLOGY, 2016, vol. 2016, no. 4, p. 754-757. ISSN: 1213-2489.
Detail

VOTAVOVÁ, H.; POHANKA, M. Effect of stabilizer length on the performance of high pressure descaling nozzles. In METAL 2016, 25rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2016. p. 261-266. ISBN: 978-80-87294-67-3.
Detail

JECHA, D.; LEŠTINSKÝ, P.; BRUMMER, V.; STEHLÍK, P. Wet flue gas desulphurization using a new O-element design. Clean Technologies and Environmental Policy, 2017, vol. 19, no. 2017, p. 417-426. ISSN: 1618-954X.
Detail

BULEJKO, P.; ADAMEC, V.; SCHÜLLEROVÁ, B.; SKEŘIL, R. Levels, sources and health risk assessment of polycyclic aromatic hydrocarbons in Brno, Czech Republic: A five year study. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2016, vol. 23, no. 20, p. 20462-20473. ISSN: 0944-1344.
Detail

KEJÍK, P.; SVĚRÁK, T.; BORGUĽOVÁ, E.; BULEJKO, P.; KRIŠTOF, O.; MAYEROVÁ, K.; HURYCHOVA, H.; ŠKLUBALOVA, Z.; PECIAR, P. SURFACTANTS GRINDING ACTIVATION OF CLINKER. Scientifc proceedings, 2015, no. 23, p. 53-56. ISSN: 1338-1954.
Detail

KRACÍK, P.; BALÁŠ, M.; LISÝ, M.; POSPÍŠIL, J. Effect of size sprinkled heat exchange surface on developing boiling. Advances in Mechanical Engineering, 2016, vol. 8, no. 6, p. 1-7. ISSN: 1687-8132.
Detail

DLUGOŠ, J.; NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; KNOTEK, J. Development of Computational Model of Piston Dynamics Behaviour. In ENGINEERING MECHANICS 2016 - 22nd INTERNATIONAL CONFERENCE. Prague, Czech Republic: Institute of Thermomechanics Academy of Sciences of the Czech Republic, v.v.i., 2016. p. 126-129. ISBN: 978-80-87012-59-8.
Detail

KRÁSNÝ, I.; ASTROUSKI, I.; RAUDENSKÝ, M. Polymeric Hollow Fiber Heat Exchanger as an Automotive Radiator. Applied Thermal Engineering, 2016, no. 108, p. 798-803. ISSN: 1359-4311.
Detail

BULEJKO, P.; STRÁNSKÁ, E.; WEINERTOVÁ, K. Properties and structure of heterogeneous ion-exchange membranes after exposure to chemical agents. Journal of Solid State Electrochemistry, 2017, vol. 21, no. 1, p. 111-124. ISSN: 1432-8488.
Detail

MORAVČÍK, I.; ČÍŽEK, J.; DLOUHÝ, I.; KRAJŇÁKOVÁ, P. INFLUENCE OF SINTERING TEMPERATURE ON MICROSTRUCTURE AND HARDNESS OF AlCoCrFeNiTi0.5 HIGH ENTROPY ALLOY. In METAL 2016. Brno: TANGER Ltd., 2016. p. 64-65. ISBN: 978-80-87294-66-6.
Detail

KOUTECKÝ, T.; PALOUŠEK, D.; BRANDEJS, J. Sensor planning system for fringe projection scanning of sheet metal parts. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2016, vol. 94, no. December 2016, p. 60-70. ISSN: 0263-2241.
Detail

MATĚJÍČEK, J.; VEVERKA, J.; ČÍŽEK, J.; KOUŘIL, J. Electron beam remelting of plasma sprayed alumina coatings. In METAL 2016. Brno: Tanger Ltd., 2016. p. 921-927. ISBN: 978-80-87294-66-6.
Detail

KHUN, N.; LI, Z.; KHOR, K.; ČÍŽEK, J. Higher in-flight particle velocities enhance in vitro tribological behavior of plasma sprayed hydroxyapatite coatings. Tribology International, 2016, vol. 103, no. 1, p. 496-503. ISSN: 0301-679X.
Detail

MATĚJKOVÁ, M.; ČÍŽEK, J.; GEARTNER, F.; KLASSEN,; DLOUHÝ, I. Effect of processing parameters on high-energy ball milling HA/Ti composite powders. In Multi-scale design of advanced materials conference proceedings. 2016. p. 19-24. ISBN: 978-80-214-5358-6.
Detail

POHANKA, M.; VOTAVOVÁ, H. Overcooling in overlap areas during hydraulic Descaling. Materiali in tehnologije, 2016, vol. 50, no. 4, p. 575-578. ISSN: 1580-2949.
Detail

HORSKÝ, J.; KOMÍNEK, J.; GUZEJ, M. Advanced methodology of determination water jet cooling intensity during the casting process. In 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics. ASTFE, 2016. p. 685-688. ISBN: 978-1-77592-124-0.
Detail

RAUDENSKÝ, M.; ASTROUSKI, I.; BROŽOVÁ, T.; BARTULI, E. Flexible Polymeric Hollow Fiber Heat Exchangers for Electronic Systems. In Thermal and Thermomechanical Phenomena in Electronic Systems ITherm 2016. 2010 IEEE. USA: IEEE, 2016. p. 1143-1147. ISBN: 978-1-4799-5266-3. ISSN: 1087-9870.
Detail

ŠMÍD, M.; HUTAŘ, P.; HORNÍK, V.; HRBÁČEK, K.; KUNZ, L. Stage I fatigue cracking in MAR-M 247 superalloy at elevated temperatures. Procedia Structural Integrity, 2016, vol. 2, no. 1, p. 3018-3025. ISSN: 2452-3216.
Detail

HORNÍK, V.; ŠMÍD, M.; HUTAŘ, P.; KUNZ, L.; HRBÁČEK, K. Interaction of Creep and High Cycle Fatigue of IN 713LC Superalloy. Solid State Phenomena, 2017, vol. 258, no. 2017, p. 595-598. ISSN: 1012-0394.
Detail

JIRÁSEK, A.; NAVRÁTIL, J.; DALENBRING, M. Computational Fluid Dynamics Study of Benchmark Supercritical Wing at Flutter Condition. AIAA JOURNAL, 2016, vol. 0, no. 0, p. 1-8. ISSN: 0001-1452.
Detail

PROCHÁZKOVÁ, J.; KRATOCHVÍL, J. Direct Point Cloud Visualisation Using T-spline with Feature Detection. Advances in Intelligent Systems and Computing, 2017, vol. 2016, no. 1, p. 240-251. ISSN: 2194-5357.
Detail

NAVRÁTIL, J. Aerodynamic shape optimization of an airliner elastic wing. In 12th International Conference on Applied Mathematical Programming and Modelling (APMOD 2016). ITM Web of Conferences. Francie: EDP Sciences, 2017. p. 1-9. ISBN: 9781510851924. ISSN: 2271-2097.
Detail

RAUDENSKÝ, M.; TSENG, A. A.; HORSKÝ, J.; KOMÍNEK, J. Recent developments of water and mist spray cooling in continuous casting of steels. Metallurgical Research and Technology, 2016, vol. 113, no. 5, p. 1-24. ISSN: 2271-3654.
Detail

MAZAL, P.; VLAŠIC, F.; MAHMOUD, H.; JANA, M. The Use of Acoustic Emission Method for Diagnosis of Damage of Pneumatic Cylinders. In 19th WCNDT 2016 - World Conference on NDT. Munchen, Germany: German Society for NDT, 2016. p. 1-10. ISBN: 978-3-940283-78-8.
Detail

MAZAL, P.; VLAŠIC, F.; MAHMOUD, H. Use of Acoustic Emission Method for Diagnosis of Damage of Pneumatic Cylinders. The e-Journal of Nondestructive Testing, 2016, vol. 2016, no. 1, p. 1-10. ISSN: 1435-4934.
Detail

DLUGOŠ, J.; NOVOTNÝ, P.; RAFFAI, P. Difficulties in Computational Modelling of Piston/Liner Interaction. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2016. p. 134-137. ISSN: 2345-0533.
Detail

PAVLAS, M.; PUTNA, O.; KROPÁČ, J.; STEHLÍK, P. Complex approach towards the assessment of waste-to-energy plants' future potential. In Thomé-Kozmiensky, K. J., Thiel, S. (Eds.): Waste Management, Volume 6, Waste-to-Energy. Neuruppin, Germany: TK Verlag Karl Thomé-Kozmiensky, 2016. p. 149-160. ISBN: 978-3-944310-29-9.
Detail

ŠTĚTINA, J.; MAUDER, T.; KLIMEŠ, L. STEEL IN AUTOMOTIVE INDUSTRY. In KOKA 2016. 1. Brno: VUT Brno, 2016. p. 195-202. ISBN: 978-80-214-5379-1.
Detail

MALÝ, M.; JANÁČKOVÁ, L.; JEDELSKÝ, J.; JÍCHA, M. Effects of Alternative Fuel characteristics on Spray Generated by Small Pressure-Swirl Atomizer. In The Application of Experimental and Numerical methods in Fluid Mechanics and Energy 2016. Žilina: University of Žilina, 2016. p. 121-125. ISBN: 978-80-554-1193-4.
Detail

MALÝ, M.; JANÁČKOVÁ, L.; JEDELSKÝ, J.; JÍCHA, M. Impact of alternative fuel rheology on spraying process of small pressure-swirl atomizer. In THE APPLICATION OF EXPERIMENTAL AND NUMERICAL METHODS IN FLUID MECHANICS AND ENERGY 2016: XX. Anniversary of International Scientific Conference. AIP conference proceedings. American Institute of Physics Inc., 2016. p. 1-6. ISBN: 978-0-7354-1402-0. ISSN: 0094-243X.
Detail

MALÝ, M.; JANÁČKOVÁ, L.; JEDELSKÝ, J.; JÍCHA, M. The influence of spill-line geometry on a spray generated by a pressure-swirl atomizer. In EPJ Web of Conferences. EPJ Web of Conferences. EDP Sciences, 2016. p. 1-6. ISSN: 2100-014X.
Detail

MOURALOVÁ, K.; ZAHRADNÍČEK, R.; HOUŠKA, P. Evaluation of surface quality of X210CR12 steel for forming tools machined by WEDM. MM Science Journal, 2016, vol. 2016, no. 4, p. 1366-1369. ISSN: 1803-1269.
Detail

ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. The role of loading path in ductile fracture. In Insights and Innovations in Structural Engineering, Mechanics and Computation. 2016. p. 550-556. ISBN: 978-1-138-02927-9.
Detail

SCHMIDT, M.; ASTROUSKI, I.; REPPICH, M.; RAUDENSKÝ, M. Solar Panel Cooling System with Hollow Fibres. Applied Solar Energy (English translation of Geliotekhnika), 2016, vol. 52, no. 2, p. 86-92. ISSN: 0003-701X.
Detail

RAUDENSKÝ, M.; ASTROUSKI, I.; BROŽOVÁ, T. Polymeric hollow fiber heat exchangers. In Heat Transfer XIV Simulation and Experiments in Heat Transfer and its Applications. WIT Transactions on Engineering Sciences. UK: Wessex Institute, 2016. p. 95-105. ISBN: 978-1-78466-109-0. ISSN: 1743-3533.
Detail

KAVIČKA, F.; ŠTĚTINA, J.; SEKANINA, B.; MASARIK, M.; ČAMEK, L.; MAUDER, T.; KLIMEŠ, L. Off-line a on-line model teplotního pole plynule lité bramy ve Vítkovice steel a.s. In XXII. celostátní konference Výroba a vlastnosti oceli na odlitky a litiny s kuličkovým grafitem. Žďas a.s. Žďár nad Sázavou: Česká slévárenská společnost, 2016. s. 60-75. ISBN: 978-80-02-02679-2.
Detail

SMILEK, J.; HADAŠ, Z. Improving power output of inertial energy harvesters by employing principal component analysis of input acceleration. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, vol. 85, no. 1, p. 801-808. ISSN: 0888-3270.
Detail

VRÁNA, R.; KOUKAL, O.; KOUTNÝ, D.; PALOUŠEK, D.; KREJČÍ, P. Device for Testing Impact Resistance of Lattice Structures Panels Produced by the Selective Laser Melting. In Machine Design: 56th International Conference of Machine Design Departments. 2015. ISBN: 978-3-639-66914-5.
Detail

MOURALOVÁ, K.; MATOUŠEK, R.; KOVÁŘ, J.; MACH, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J. Analyzing the surface layer after WEDM depending on the parameters of a machine for the 16MnCr5 steel. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2016, vol. 2016, no. 94, p. 771-779. ISSN: 0263-2241.
Detail

NEVRLÝ, V.; ŠOMPLÁK, R.; POPELA, P.; PAVLAS, M.; OSIČKA, O.; KŮDELA, J. Heuristic challenges for spatially distributed waste production identification problems. Mendel Journal series, 2016, vol. 2016, no. 1, p. 109-116. ISSN: 1803-3814.
Detail

PÍŠTĚK, V.; KLIMEŠ, L.; MAUDER, T. Rheological models of high viscosity silicone fluids. In Vibroengineering Procedia. Vibroengineering Procedia. Kaunas, Litva: 2016. p. 25-30. ISSN: 2345-0533.
Detail

GALAS, R.; OMASTA, M.; KŘUPKA, I.; HARTL, M. Laboratory investigation of ability of oil-based friction modifiers to control adhesion at wheel-rail interface. WEAR, 2016, vol. 368-369, no. 3, p. 230-238. ISSN: 0043-1648.
Detail

OSIČKA, O.; HRDINA, J.; ŠOMPLÁK, R.; POPELA, P.; PAVLAS, M. Shapley value approximation for games with distant players. Mendel Journal series, 2016, vol. 2016, no. 1, p. 103-108. ISSN: 1803-3814.
Detail

STEHLÍK, P. Up-to-Date Waste-to-Energy Approach, From Idea to Industrial Application. 1. 1. Cham, Switzerland: Springer International Publishing AG, 2016. 115 p. ISBN: 978-3-319-15466-4.
Detail

ZATOČILOVÁ, A.; PALOUŠEK, D.; BRANDEJS, J. Image-based measurement of the dimensions and of the axis straightness of hot forgings. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2016, vol. 94, no. December 2016, p. 254-264. ISSN: 0263-2241.
Detail

ZATOČILOVÁ, A.; ZIKMUND, T.; KAISER, J.; PALOUŠEK, D.; KOUTNÝ, D. Measurement of the porosity of additive-manufactured Al-Cu alloy using x-ray computed tomography. In 8th International Conference on Materials Structure and Micromechanics of Fracture, MSMF8; Brno; Czech Republic; 27 July 2016 through 29 July 2016; Code 188189. Solid State Phenomena. 2016. p. 448-451. ISBN: 9783038356264. ISSN: 1662-9779.
Detail

ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M.; NOVOTNÝ, P. INVESTIGATION OF SINGLE STAGE GEARBOX PARAMETERS INFLUENCING SURFACE NORMAL VELOCITY. In Engineering Mechanics 2016. 2016. p. 478-481. ISBN: 978-80-87012-59-8.
Detail

ŘEHÁK, K.; PROKOP, A. Numerical simulation of single stage gearbox with tooth damage. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International Ltd., 2016. p. 88-92. ISSN: 2345-0533.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; HOUŠKA, P. Experimental evaluation of WEDM machined surface waviness. Acta Polytechnica (on-line), 2016, vol. 56, no. 5, p. 360-366. ISSN: 1805-2363.
Detail

ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M. Comparison of Torque Influence on Single Stage Gearbox Vibrations. In KOKA 2016. Brno: 2016. p. 173-178. ISBN: 978-80-214-5379-1.
Detail

ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J. Extremely Low-Stress Triaxiality Tests in Calibration of Fracture Models in Metal-Cutting Simulation. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, vol. 47, no. 11, p. 5302-5312. ISSN: 1073-5623.
Detail

JEDELSKÝ, J.; MALÝ, M.; JANÁČKOVÁ, L.; JÍCHA, M. Effect of Geometric Factors on Spray Characteristics and Stability for Small Spill-Return Pressure-Swirl Atomizers. In 27th European Conference on Liquid Atomization and Spray Systems. Brighton: 2016. p. 1-12. ISBN: 978-1-910172-09-4.
Detail

KAVIČKA, F.; JANOVA, D.; STRÁNSKÝ, K.; PANTĚLEJEV, L.; SPOTZ, Z.; SEKANINA, B. Průzkum terénu ve Švařci (v lokalitě Za kaplí a Nad úpravnou vody) a v Havírně pod Cumberkem u Štěpánova nad Svratkou. Slévárenství, 2016, roč. LXIV, 2016, č. 7-8, s. 333-336. ISSN: 0037-6825.
Detail

BULEJKO, P.; SVĚRÁK, T.; DOHNAL, M.; POSPÍŠIL, J.; KRIŠTOF, O.; KEJÍK, P.; KALIVODA, J. Filtrační účinnost membrán na bázi dutých vláken při odstraňování částic ze vzduchu. In Sborník XVII. výroční konference České aerosolové společnosti, 25. – 26. října 2016, Mikulov. Praha: Česká aerosolová společnost, 2016. s. 65-68. ISBN: 978-80-86186-85-6.
Detail

BULEJKO, P.; ADAMEC, V.; SCHÜLLEROVÁ, B.; HRABOVÁ, K.; SKEŘIL, R. Analýza zdravotních rizik PM10 a PM2,5 v lokalitách města Brna. In Sborník XVII. výroční konference České aerosolové společnosti, 25. – 26. října 2016, Mikulov. Praha: Česká aerosolová společnost, 2016. s. 69-72. ISBN: 978-80-86186-85-6.
Detail

ZUBÍK, M.; PROKOP, A.; ŘEHÁK, K. Investigation of single stage gearbox parameters including variable torque conditions. In Transport Means 2016. Transport Means. Kaunas, Lithuania: Technologija, 2016. p. 720-724. ISSN: 1822-296X.
Detail

SVĚRÁK, T.; BULEJKO, P.; KRIŠTOF, O.; KEJÍK, P.; KALIVODA, J.; HORSKÝ, J. Covering ability of aluminum pigments prepared by milling processes. POWDER TECHNOLOGY, 2017, vol. 305, no. 1, p. 396-404. ISSN: 0032-5910.
Detail

KUČERA, P.; PÍŠTĚK, V. Truck vibrations caused by unbalanced rotating shaft. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2016. p. 148-153. ISSN: 2345-0533.
Detail

KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Ductile fracture criteria in prediction of slant fracture. In ECCOMAS Congress 2016. 2016. p. 6699-6710. ISBN: 978-618-82844-0-1.
Detail

LOMTATIDZE, A. Theorems on Differential Inequalities and Periodic Boundary Value Problem for Second-Order Ordinary Differential Equations. Memoirs Diff. Equat. Math. Phys, 2016, vol. 67, no. 1, p. 1-129. ISSN: 1512-0015.
Detail

JECHA, D.; LEŠTINSKÝ, P.; BRUMMER, V.; JÍCHA, J. The flue gas desulphurization at the first stage of the absorber - O-element. Chemical Engineering Transactions, 2017, vol. 2017, no. 56, p. 1909-1914. ISSN: 2283-9216.
Detail

BULEJKO, P.; KŘIVČÍK, J. Determination of milling performance of a GSM 06 laboratory vibrating mill with different grinding media. Workshop of Students' presentations 2015: Membranes and membrane processes. Česká Lípa: Czech Membrane Platform, 2015. p. 11-11. ISBN: 978-80-904517-4-2.
Detail

PÍŠTĚK, V.; KLIMEŠ, L.; MAUDER, T. Optimal structure design for rheological models of elastomer components. In Proceedings of 20th International Conference Transport Means 2016. Transport Means. Kaunas, Litva: Kaunas University of Technology, 2016. p. 197-202. ISSN: 1822-296X.
Detail

LÍZAL, F.; JEDELSKÝ, J.; JÍCHA, M.; HAPALA, R. Rychlostní pole v okolí vyústky pro odmrazování a odmlžování čelního skla osobního automobilu. Vytápění, větrání, instalace, 2016, roč. 25, č. 4, s. 190-196. ISSN: 1210-1389.
Detail

PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F.; BENEŠOVSKÝ, M. Optimal intermeshing of multi roller cross roll straightening machine. In AIP Conference Proceedings 1769. 2016. p. 120002-1 (120002-4 p.)ISBN: 978-0-7354-1427-3.
Detail

LIN, W.; CHEN, K.; CHEN, Y.; VĚCHET, S. Suppression of Motion-Induced Vibration for a Two-DoF System Using State Feedback Control. In 2016 IEEE International Power Electronics and Motion Control Conference (PEMC). Varna, Bulgaria: The Institute of Electrical and Electronics Engineers, 2016. p. 767-772. ISBN: 978-1-5090-1797-3.
Detail

BULEJKO, P.; BÍLEK, V. Influence of Chemical Additives and Curing Conditions on Mechanical Properties and Carbonation Resistance of Alkali Activated Slag Composites. Materiali in tehnologije, 2017, vol. 51, no. 1, p. 49-53. ISSN: 1580-2949.
Detail

MATLÁK, J.; DOLEŽAL, P.; ZAPLETAL, J.; DLOUHÝ, I. Electron beam surface quenching of X37CrMoV51 tool steel swages. Manufacturing TECHNOLOGY, 2016, vol. 16, no. 4, p. 744-749. ISSN: 1213-2489.
Detail

ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Assessment of crack-related problems in layered ceramics using the finite fracture mechanics and coupled stress-energy criterion. In Procedia Structural Integrity. Procedia Structural Integrity. Itálie: Elsevier, 2016. p. 2014-2021. ISSN: 2452-3216.
Detail

ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Modelling of edge crack formation and propagation in ceramic laminates using the stress–energy coupled criterion. Engineering Fracture Mechanics, 2016, vol. 167, no. 2016, p. 45-55. ISSN: 0013-7944.
Detail

ZELENÝ, M.; DLOUHÝ, I. Magnetism of coherent Co and Ni thin films on Cu(111) and Au(111) substrates: An ab initio study. J. Magnetism Magn. Mat., 2017, vol. 424, no. -, p. 394-401. ISSN: 0304-8853.
Detail

ZAHRADNÍČEK, R.; HOUŠKA, P. SCHOTTKY SOLAR CELL WITH GRAPHENE/AL2O3/SI INTERFACE. In NANOCON 2016. 2016. p. 95-95. ISBN: 978-80-87294-71-0.
Detail

ZAHRADNÍČEK, R.; HOUŠKA, P. STUDY OF THE INFLUENCE OF SOLVENT ON TRANSMISSION QUALITY GRAPHENE. In NANOCON 2016. 2016. p. 42-42. ISBN: 978-80-87294-71-0.
Detail

BROŽOVÁ, T.; RAUDENSKÝ, M. Determination of the Surface Wettability of Polymeric Hollow Fibres. 24th INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. p. 47-47. ISBN: 978-961-94088-0-3.
Detail

RUBEŠ, O.; SMILEK, J.; BRABLC, M.; HADAŠ, Z. Nonlinear Redesign of Vibration Energy Harvester: Linear Operation Test and Nonlinear Simulation of Extended Bandwidth. In 2016 IEEE International Power Electronics and Motion Control Conference (PEMC). Varna, Bulgaria: The Institute of Electrical and Electronics Engineers, 2016. p. 737-742. ISBN: 978-1-5090-1797-3.
Detail

KAVIČKA, F.; STRÁNSKÝ, K.; DOBROVSKÁ, J.; ŠTĚTINA, J.; MAUDER, T. Analýza atypického průvalu při radiálním plynulém lití bramy v pásmu rovnání. In Sborník přednášek z 53. slévárenských dnů. 2016. s. 17-29. ISBN: 978-80-02-02690-7.
Detail

POHANKA, M.; RAUDENSKÝ, M.; HWANG, J., Y.; YOU, J., W.; LEE, S. H.;. Mutual collision of water jets from adjacent high pressure flat jet nozzles on flat surfaces during hydraulic descaling. TEHNIČKI VJESNIK - TECHNICAL GAZETTE, 2016, vol. 23, no. 5, p. 1389-1394. ISSN: 1330-3651.
Detail

DRÁPAL, L.; VOPAŘIL, J. Shape Design of a Piston Ring. In Transport Means 2016: Proceeding of the 20th International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2016. p. 767-771. ISSN: 1822-296X.
Detail

DRÁPAL, L.; ŠOPÍK, L. Influence of Crankshaft Counterweights upon Engine Block Load. In Transport Means 2016: Proceeding of the 20th International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2016. p. 809-814. ISSN: 1822-296X.
Detail

DRÁPAL, L.; ŠOPÍK, L.; VOPAŘIL, J. Investigation of Torsional Vibration of Unconventional Crank Train. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2016. p. 31-36. ISSN: 2345-0533.
Detail

NOHÁL, L.; VACULKA, M. Experimental and Computational Evaluation of Rolling Bearing Steel Durability. In 4. mezinárodní konference Moderní trendy konstrukčních materiálů. 2016. Plzeň: Tanger Ltd., 2016. p. 1-4. ISBN: 978-80-87294-69-7.
Detail

CHLADA, M.; NOHÁL, L.; PŘEVOROVSKÝ, Z. Condition Monitoring of Thrust Ball bearings using Continuous AE. In 32nd Eropean Conference on Acoustic Emission Testing - Proceedings. 2016. Brno: Česká společnost pro nedestrukticní testování, 2016. p. 211-216. ISBN: 978-80-214-5386-9.
Detail

MLKVIK, M.; ZAREMBA, M.; JEDELSKÝ, J.; JÍCHA, M. Comparison of Y-jet and OIL effervescent atomizers based on internal and external two-phase flow characteristics. In EPJ Web of Conferences. EPJ Web of Conferences. EDP sciences, 2016. p. 1-4. ISSN: 2100-014X.
Detail

JANDOUREK, P.; HABÁN, V.; POCHYLÝ, F.; FIC, M. Valve exploiting the principle of the side channel turbine. In EPJ Web of Conferences. EPJ Web of Conferences. 2017. p. 1-5. ISSN: 2100-014X.
Detail

BANSOD, Y.; BURŠA, J. Finite element simulation of mechanical tests with bendo-tensegrity models of smooth muscle cell. Vranovska Ves, Czech Republic.: XXIV Cytoskeletal Club, Veterinary Research Institute, Masaryk University., 2016.
Detail

ŠUBRT, K.; HOUŠKA, P.; HADAŠ, Z. Nové řídicí jednotky Faulhaber MC50xx. Automa, 2016, roč. 2016, č. 8-9, s. 66-67. ISSN: 1210-9592.
Detail

ZEMANOVÁ, L.; KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P. FATIGUE PROPERTIES OF EN AW-2618A ALUMINIUM ALLOY PRODUCED BY SELECTIVE LASER MELTING TECHNOLOGY. In Metal 2016. 1st. Tanger Ltd., 2016. p. 1583-1589. ISBN: 978-80-87294-66-6.
Detail

VLAŠIC, F.; KRATOCHVÍLOVÁ, V.; MAZAL, P.; PALOUŠEK, D.; KOUTNÝ, D. Fatigue Damage of Aluminium Alloy EN AW 2618A Produced by SLM Technology. In World PM2016 Proceedings. 2016. European Powder Metallurgy Associtation, 2016. p. 1-6. ISBN: 978-1-899072-48-4.
Detail

MAHMOUD, H.; VLAŠIC, F.; MAZAL, P.; JÁNA, M. DAMAGE IDENTIFICATION OF PNEUMATIC COMPONENTS BY ACOUSTIC EMISSION. In 32nd European Conference on Acoustic Emission Testing. 1st edition. Brno: VUTIUM Brno, Brno University of Technology, 2016. p. 315-322. ISBN: 978-80-214-5386-9.
Detail

KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P. STUDY OF FATIGUE PROCESSES OF SELECTIVE LASER MELTING AND CONVENTIONAL PRODUCED MATERIALS. In 32nd European Conference on Acoustic Emission Testing. 1st edition. Brno: VUTIUM Brno, Brno University of Technology, 2016. p. 263-270. ISBN: 978-80-214-5386-9.
Detail

JÁNA, M.; MAHMOUD, H.; MAZAL, P.; VLAŠIC, F. STANOVENÍ KOEFICIENTU ODHALENÍ POŠKOZENÍ V PNEUMATICKÝCH VÁLCÍCH METODOU AKUSTICKÉ EMISE. In Defektoskopie 2016, NDE for Safety. první. Brno: Vysoké účení technické v Brně, ČNDT, 2016. s. 27-35. ISBN: 978-80-214-5422-4.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; SLIWKOVÁ, P. Evaluation of S-parameters on the surface of titanium alloy Ti-6Al-4V and Al99.5 machined by WEDM. MM Science Journal, 2016, vol. 2016, no. 6, p. 1537-1540. ISSN: 1803-1269.
Detail

HNÍZDIL, M.; CHABIČOVSKÝ, M. Improvement of S355J2 Steel Mechanical Properties by Heat Treatment. 24th INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. p. 84-84. ISBN: 978-961-94088-0-3.
Detail

VONDRA, M.; MÁŠA, V.; BOBÁK, P. The Potential for Digestate Thickening in Biogas Plants and Evaluation of Possible Evaporation Methods. In CHEMICAL ENGINEERING TRANSACTIONS - VOL.52. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2016. p. 787-792. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
Detail

MÁŠA, V.; HAVLÁSEK, M. Integration of Air to Water Heat Pumps into Industrial District Heating Substations. In CHEMICAL ENGINEERING TRANSACTIONS - VOL.52. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi Srl, 2016. p. 739-744. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
Detail

TŮMA, Z.; KOTEK, L.; TŮMA, J.; BRADÁČ, F. APPLICATION OF VIRTUAL REALITY FOR VERIFICATION OF REAL WORKPLACE STATE. MM Science Journal, 2016, vol. 1, no. 1, p. 1487-1490. ISSN: 1803-1269.
Detail

KAVIČKA, F.; DOBROVSKÁ, J.; ŠTĚTINA, J.; STRÁNSKÝ, K.; KATOLICKÝ, J.; SEKANINA, B.; HEGER, J.; FRANCOVÁ, H. Numerical models of solidification and their application in metal and ceramic technology. Brno University of Technology, VŠB Technical University of Ostrava. Brno University of Technology, VŠB Technical University of Ostrava. Litera Brno: Brno University of Technology, VŠB Technical University of Ostrava, 2016. 161 p. ISBN: 978-80-214-5377-7.
Detail

STRÁNSKÝ, K.; JANOVÁ, D.; STRÁNSKÝ, L. a kolektiv. Těžba a hutnické zpracování polymetalických rud na českomoravské vrchovině II. díl. Těžba a hutnické zpracování polymetalických rud na českomoravské vrchovině II. díl. Česká slévárenská společnost, Člen ČSTV Praha. 2016. s. 1-40. ISBN: 978-80-02-02675-4.
Detail

NOVOTNÝ, P.; ŘEHÁK, K.; PROKOP, A.; ZUBÍK, M. Solution of dynamics and acoustics by virtual powertrain. In Engineering Mechanics 2016. PRAGUE, CZECH REPUBLIC: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, 2016. p. 482-486. ISBN: 978-80-87012-59-8.
Detail

NOVOTNÝ, P.; DLUGOŠ, J.; RAFFAI, P. Advanced Computational Strategy for Simulation of Turbocharger Rotordynamics. In Transport Means. 2016. Transport Means. Kaunas, Lithuania: 2016. p. 134-137. ISSN: 1822-296X.
Detail

NOVOTNÝ, P.; VOPAŘIL, J. Development of Highly Elastic Couplings for Natural Gas Engines. In Transport Means 2016. Transport Means. Kaunas, Lithuania: 2016. p. 93-98. ISSN: 1822-296X.
Detail

NOVOTNÝ, P.; MARŠÁLEK, O.; RAFFAI, P.; DLUGOŠ, J.; KNOTEK, J. Mixed Lubrication Solution with Consideration of Elastic Deformations and Real Surface Roughness Structures. Journal of the Balkan Tribological Association, 2016, vol. 2016, no. 4, p. 3292-3312. ISSN: 1310-4772.
Detail

POSPÍŠIL, J.; LISÝ, M.; ŠPILÁČEK, M. Optimalization of afterburner channel in biomass boiler using CFD analysis. Acta Polytechnica, 2016, vol. 56, no. 5, p. 379-387. ISSN: 1210-2709.
Detail

DOLEŽAL, P.; ZAPLETAL, J.; FINTOVÁ, S.; TROJANOVÁ, Z.; GREGER, M.; ROUPCOVÁ, P.; PODRÁBSKÝ, T. Influence of Processing Techniques on Microstructure and Mechanical Properties of a Biodegradable Mg-3Zn-2Ca Alloy. Materials, 2016, vol. 9, no. 11, p. 1-15. ISSN: 1996-1944.
Detail

MOURALOVÁ, K.; KARPÍŠEK, Z.; KOVÁŘ, J.; KLAKURKOVÁ, L. Freeman-Tukey Pseudoquasi-norm for Evaluating the Total Height of Profile Rt after WEDM. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 455-460. ISBN: 978-80-01-05882-4.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Optimization of the Cutting Speed for Ti-6Al-4V Using WEDM Depending on Quality of the Machined Surface. In Mechatronika 2016. 1. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 450-454. ISBN: 978-80-01-05882-4.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; MAN, O. Characterisation of 3D Topography of the Surface Machined by Finishing Technologies of WEDM and Grinding. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 445-449. ISBN: 978-80-01-05882-4.
Detail

KOTEK, L.; PÍŠTĚK, V.; DRÁPAL, L. Identification of possible causes of faults of fuel injection nozzles. In Transport Means - Proceedings of the International Conference. Transport Means. Kaunas Univ Technol, Kaunas, LITHUANIA: KAUNAS UNIV TECHNOLOGY PRESS, K DONELAICIO 73, KAUNAS LT 3006, LITHUANIA, 2015. p. 253-256. ISBN: 9955-09-935-6. ISSN: 1822-296X.
Detail

KOTEK, L.; NOSEK, A.; FIALA, A.; BARTOŠ, V. Risks in industrial management systems. MM Science Journal, 2016, vol. 2016, no. 6, p. 1608-1612. ISSN: 1803-1269.
Detail

KOTEK, L.; TŮMA, Z.; BLECHA, P.; MUKHAMETZIANOVA, L. Risk based workload and staffing level analysis. In Risk, Reliability and Safety: Innovating Theory and Practice - Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016. London: CRC Press, 2016. p. 2997-3001. ISBN: 978-1-138-02997-2.
Detail

KEJÍK, P.; BULEJKO, P.; SVĚRÁK, T.; KRIŠTOF, O.; MAYEROVÁ, K. Self-supported Geopolymer-based Barriers for Filtration Applications. 24th INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. ISBN: 978-961-94088-0-3.
Detail

SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Analysis of Accuracy of Biaxial Tests Based on their Computational Simulations. Strain, 2016, vol. 52, no. 5, p. 424-435. ISSN: 1475-1305.
Detail

Müllerová, J., Brůna, J., Dvořák, P., Bartaloš, T., Vítková, M. Does the data resolution/origin matter? Satellite, airborne and UAV imagery to tackle plant invasions. In XXIII ISPRS Congress, 12–19 July 2016, Prague, Czech Republic. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. c. Prague, Czech Republic: International Society of Photogrammetry and Remote Sensing (ISPRS), Copernicus, 2016. p. 903-908. ISSN: 1682-1750.
Detail

ZELENÝ, M.; DLOUHÝ, I. Different Ab Initio Approaches for Doping Descriptions: Tetragonal Deformation of Ni-Mn-Ga Alloys. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Switzerland: Trans Tech Publications, 2016. p. 37-40. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
Detail

ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Behavior of Lode Dependent Plasticity at Plane Strain Condition and its Implication to Ductile Fracture. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. 2017. p. 213-216. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
Detail

JEGLA, Z. Innovative adaptation of MPF model to recognition of thermal behaviour of operated industrial low emission burner system. In Chemical Engineering Transactions. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi, S.r.l., 2016. p. 667-672. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
Detail

VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D. Impact Resistance of Different Types of Lattice Structures manufactured by SLM. MM Science Journal, 2016, vol. 2016, no. 6, p. 1579-1585. ISSN: 1803-1269.
Detail

VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D.; ZIKMUND, T. Influence of Selective Laser Melting Process Parameters on Impact Resistance of Lattice Structure made from AlSi10Mg. In World PM2016 Proceedings. Hamburg, Germany: 2016. p. 1-6. ISBN: 978-1-899072-48-4.
Detail

HADAŠ, Z.; GARAMI, B. Mechatronic Model of Harmonic Drive System. In Proceedings of the 2016 17th International Conference on Mechatronics – Mechatronika (ME) 2016. 1. Praha: Czech Technical University in Prague, 2016. p. 273-278. ISBN: 978-80-01-05882-4.
Detail

VĚCHET, S.; HRBÁČEK, J.; KREJSA, J. Environmental Data Analysis for Learning Behavioral Patterns in Smart Homes. In Proceedings of the 2016 17th International Conference on Mechatronics – Mechatronika (ME) 2016. 1. Prague: Czech Technical University in Prague, 2016. p. 386-391. ISBN: 978-80-01-05882-4.
Detail

JANÁK, L.; ŠTETINA, J.; FIALA, Z.; HADAŠ, Z. Quantities and Sensors for Machine Tool Spindle Condition Monitoring. MM Science Journal, 2016, vol. 2016, no. December, p. 1648-1653. ISSN: 1805-0476.
Detail

ČUPERA, J. Imaging of lattice orientation and deformations by electron channelling contrast imaging compared with low voltage imaging and EBSD. In MULTI-SCALE DESIGN OF ADVANCED MATERIALS CONFERENCE PROCEEDINGS. Brno: Brno University of Technology, 2016. p. 2-12. ISBN: 978-80-214-5358-6.
Detail

HIMR, D. Simulace přechodových jevů v potrubí hydraulického lisu. 2016.
Detail

MORAVČÍK, I.; HANUSOVÁ, P.; ČUPERA, J.; ZAPLETAL, J.; ČÍŽEK, J.; DLOUHÝ, I. Fractography of AlCoCrFeNiTi0.5 powder multi-principal-element alloy. In MULTI- SCALE DESIGN OF ADVANCED MATERIALS. 2016. Brno: 2016. p. 25-29. ISBN: 978-80-214-5358-6.
Detail

ŠEVEČEK, O.; NAVRÁTIL, P.; PAPŠÍK, R.; SKALKA, P.; KOTOUL, M. Influence of the Ceramic Foam Structure Irregularity on the Tensile Response. In Materials Structure and Micromechanics of Fracture VIII. Solid State Phenomena. Švýcarsko: Trans Tech Publications, 2017. p. 161-164. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
Detail

HAVLÍK, P.; KOUŘIL, J.; FORET, R.; DLOUHÝ, I.; ENZINGER, N.; WIEDNIG, CH. Evaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminium Alloy 6061 Produced by Electron Beam Welding. Materials Science Forum, 2016, no. 879, p. 714-719. ISSN: 1662-9752.
Detail

NOHÁL, L.; VACULKA, M. Metody nedestruktivního zkoušení ve výrobě a provozu valivých ložisek. In Defektoskopie 2016, NDE for Safety. 2016. Brno: Vysoké účení technické v Brně, ČNDT, 2016. s. 101-104. ISBN: 978-80-214-5422-4.
Detail

BŘEZINA, T.; BŘEZINA, L. Using a Simplified PID in Active Chatter Absorber. In Proceedings of the 2016 17th International Conference on Mechatronics – Mechatronika (ME) 2016. 1. Praha: Czech Technical University in Prague, 2016. p. 29-34. ISBN: 978-80-01-05882-4.
Detail

HOLUB, M.; BLECHA, P.; BRADÁČ, F.; MAREK, T.; ŽÁK, Z. GEOMETRIC ERRORS COMPENSATION OF CNC MACHINE TOOL. MM Science Journal, 2016, vol. 2016, no. DECEMBER, p. 1602-1607. ISSN: 1803-1269.
Detail

ZELENÝ, M.; STRAKA, L.; SOZINOV, A.; HECZKO, O. Ab initio prediction of stable nanotwin double layers and 4O structure in Ni2MnG. PHYSICAL REVIEW B, 2016, vol. 94, no. 22, p. 224108-1 (224108-6 p.)ISSN: 1098-0121.
Detail

NEČAS, D.; VRBKA, M.; URBAN, F.; GALLO, J.; KŘUPKA, I.; HARTL, M. In situ observation of lubricant film formation in THR considering real conformity: The effect of diameter, clearance and material. Journal of the mechanical behavior of biomedical materials, 2017, vol. 69, no. 5, p. 66-74. ISSN: 1751-6161.
Detail

MORAVEC, P.; RUDOLF, P. Application of a particle swarm optimization for shape optimization in hydraulic machinery. In EPJ Web of Conferences. EPJ Web of Conferences. 2017. p. 1-11. ISSN: 2100-014X.
Detail

RUČKA, J.; ANDRŠ, O.; KOVÁŘ, J. DESIGN OF THE PUMP CONTROLLER OF THE LOW PRESSURE SEWER NETWORK. MM Science Journal, 2016, vol. 6, no. 1, p. 1654-1658. ISSN: 1805-0476.
Detail

JANOŠŤÁK, F.; PAVLAS, M.; PUTNA, O.; ŠOMPLÁK, R.; POPELA, P. Heuristic Approximation and Optimization for Waste-to-Energy Capacity Expansion Problem. Mendel Journal series, 2016, vol. 2016, no. 1, p. 123-130. ISSN: 1803-3814.
Detail

BULEJKO, P.; STRÁNSKÁ, E.; WEINERTOVÁ, K. Electrochemical and mechanical stability of ion-exchange membranes in alkaline solution. Chemical Papers, 2017, vol. 71, no. 7, p. 1303-1309. ISSN: 1336-9075.
Detail

KOTEK, L.; ŤAVODOVÁ, M.; JONÁK, M.; KALINCOVÁ, D.; TŮMA, Z.; SUJOVÁ, E. Using Of High Speed Motion Analysis For Compression Test Of Motorcycle Forks Arm. In Proceedings of the 2016 17th International Conference on Mechatronics - Mechatronika, ME 2016. 1. Prague: Institute of Electrical and Electronics Engineers Inc., 2016. p. 1-4. ISBN: 978-1-5090-1303-6.
Detail

ZHÁŇAL, L., PORTEŠ, P. UNIVERSAL TOOL FOR DATA ANALYSIS. Perners' Contacts, 2016, vol. X, no. 4, p. 136-143. ISSN: 1801-674X.
Detail

POKORNÝ, J.; FIŠER, J.; FOJTLÍN, M.; JÍCHA, M. Simulační nástroj tepelné zátěže kabiny - ověření predikce na základě validačních testů v klimatické komoře. In Simulace budov a techniky prostředí. 2016. s. 1-154. ISBN: 978-80-270-0772-1.
Detail

KOVÁŘ, J.; MOURALOVÁ, K.; KŠICA, F.; KROUPA, J.; ANDRŠ, O.; HADAŠ, Z. Virtual Reality in Context of Industry 4.0. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 1-7. ISBN: 978-80-01-05882-4.
Detail

TŮMA, J.; TŮMA, Z.; SYNEK, M. Verification of prediction method for energy consumption of machine tool feed axes. MM Science Journal, 2016, no. 1, p. 1634-1638. ISSN: 1803-1269.
Detail

KRBALOVÁ, M.; BLECHA, P. Environmental management in design process of machinery. MM Science Journal, 2017, vol. 2017, no. 02, p. 1762-1768. ISSN: 1805-0476.
Detail

LÍZAL, F.; NIEDOBA, P.; ŠEDA, L.; JEDELSKÝ, J.; JÍCHA, M. Experimental verification of boundary conditions for numerical simulation of airflow in a benchmark ventilation channel. In EPJ Web of conferences. EPJ Web of Conferences. EDP Sciences, 2016. p. 1-4. ISSN: 2100-014X.
Detail

KROPÁČ, J.; GREGOR, J.; PAVLAS, M. Material vs. Energy Recovery – An Assessment Using Computational Tools NERUDA and JUSTINE. In Pomberger, R., Trieb, T. (Eds.): Tagungsband zur 13. Recy & DepoTech-Konferenz. Leoben, Austria: Montanuniversität Leoben, 2016. p. 773-776. ISBN: 978-3-200-04777-8.
Detail

GREGOR, J.; PAVLAS, M.; ŠOMPLÁK, R. Transportation Cost as an Integral Part of Supply Chain Optimization in the Field of Waste Management. Chemical Engineering Transactions, 2016, vol. 56, no. 1, p. 1927-1932. ISSN: 2283-9216.
Detail

ČERMÁK, J.; NECHVÁTAL, L. The Routh–Hurwitz conditions of fractional type in stability analysis of the Lorenz dynamical system. NONLINEAR DYNAMICS, 2017, vol. 87, no. 2, p. 939-954. ISSN: 1573-269X.
Detail

KOUTNÝ, D.; PANTĚLEJEV, L.; TOMEŠ, J.; PALOUŠEK, D. COMPARISON OF SELECTIVE LASER MELTING OF 18NI MARAGING STEEL BY PXL AND M2 CUSING. MM Science Journal, 2016, vol. 2016, no. 6, p. 1590-1596. ISSN: 1803-1269.
Detail

CHARVÁT, P.; KLIMEŠ, L.; OSTRÝ, M. Peak-shaving of ventilation air temperature with an air-PCM heat exchanger – a simulation study. In IAQVEC 2016, 9th International Conference on Indoor Air Quality Ventilation & Energy Conservation In Buildings. 2016. p. 1-5. ISBN: 9791195972401.
Detail

HIMR, D.; HABÁN, V. Výpočetní modelování tlakových, průtokových a teplotních poměrů v navrhované testovací stolici, kontrola proveditelnosti testovací stolice. 2016.
Detail

SVOBODA, P.; KOŠŤÁL, D.; GALAS, R.; KŘUPKA, I.; HARTL, M. Tribological behaviour of ultra dispersed diamond-graphite in liquid lubricants. Journal of the Balkan Tribological Association, 2016, vol. 22, no. 4A, p. 4994-5009. ISSN: 1310-4772.
Detail

ŠOMPLÁK, R.; ZAVÍRALOVÁ, L.; PAVLAS, M.; NEVRLÝ, V.; POPELA, P. Input data validation for complex supply chain models applied to waste management. Chemical Engineering Transactions, 2017, vol. 56, no. 1, p. 1921-1926. ISSN: 2283-9216.
Detail

HÁJEK, J.; JEGLA, Z. Sensitivity Analysis of Radiative Heat Loading to Tube Coil with Geometric Imperfections. In CHEMICAL ENGINEERING TRANSACTIONS. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi, S.r.l., 2016. p. 751-756. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
Detail

DOHNAL, M.; HÁJEK, J. Computational Analysis of Swirling Pipe Flow. In CHEMICAL ENGINEERING TRANSACTIONS. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi, S.r.l., 2016. p. 757-762. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
Detail

Bielakova, K; Fernandova, E; Matejovska-Kubesova, H; Weber, P; Prudius, D; Bednar, J. Can we improve the therapy of Clostridium difficile infection in elderly patients?. WIENER KLINISCHE WOCHENSCHRIFT, 2016, vol. 128, no. 15-16, p. 592-598. ISSN: 0043-5325.
Detail

ELCNER, J.; LÍZAL, F.; JÍCHA, M. Comparison of turbulent models in the case of a constricted tube. In EPJ Web of Conferences. EPJ Web of Conferences. EDP Sciences, 2016. p. 1-4. ISSN: 2100-014X.
Detail

MAN, V.; POLZER, S.; BURŠA, J. Influence of mesh density on calculated extreme stresses in aortic aneurysms. Applied andComputational Mechanics, 2016, vol. 10, no. 2, p. 97-110. ISSN: 1802-680X.
Detail

POCHYLÝ, F.; HALUZA, M.; RUDOLF, P.; HABÁN, V.; HUDEC, M. Swirl turbine as a variant of low head propeller turbine. In Proceeding of 19th International Seminar on Hydropower Plants 2016. Vienna, AUSTRIA: 2016. p. 1-11.
Detail

PANTĚLEJEV, L.; KOUTNÝ, D.; PALOUŠEK, D.; KAISER, J. Mechanical and microstructural properties of 2618 Al-alloy processed by SLM remelting strategy. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications, 2017. p. 343-349. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
Detail

RUDOLF, P.; MACH, J.; ČUPR, P.; POCHYLÝ, F. Hydraulic and structural optimization of very low head siphon propeller turbine (swirl turbine. In Proceeding 19th International Seminar on Hydropower Plants. Vienna, AUSTRIA: 2016. p. 1-10.
Detail

NOVOTNÝ, P.; DLUGOŠ, J.; RAFFAI, P. Computational simulation of the turbocharger rotor mechanical noise. In Vibroengineering Procedia. Vibroengineering Procedia. 7. Geliu ratas 15A, LT-50282,Kaunas, Lithuania: Vibroengineering PROCEDIA, 2016. p. 110-115. ISSN: 2345-0533.
Detail

NOVOTNÝ, P.; PROKOP, A.; ŘEHÁK, K. Complex strategy for a development of highly elastic couplings. In Vibroengineering PROCEDIA. Vibroengineering Procedia. 7. Geliu ratas 15A, LT-50282,Kaunas, Lithuania: JVE International Ltd., 2016. p. 97-102. ISSN: 2345-0533.
Detail

RAUDENSKÝ, M.; ASTROUSKI, I.; DOHNAL, M. Intensification of heat transfer of polymeric hollow fiber heat exchangers by chaotisation. Applied Thermal Engineering, 2017, no. 113, p. 632-638. ISSN: 1359-4311.
Detail

Müllerová, J., Bartaloš, T., Brůna, J., Dvořák, P., Vítková, M. Unmanned aircraft in nature conservation: an example from plant invasions. INTERNATIONAL JOURNAL OF REMOTE SENSING, 2017, vol. 38, no. 1, p. 1-22. ISSN: 0143-1161.
Detail

POHANKA, M.; CHABIČOVSKÝ, M.; ONDRUCH, T. Thermophysical properties measurement of scale layer on steel substrate using flash method. 24th INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. p. 175-175. ISBN: 978-961-94088-0-3.
Detail

ANDRŠ, O.; KOVÁŘ, J.; RUČKA, J. Design of Test Device for Automatic Pressure Sewerage Control Unit. In Mechatronika 2016. 1. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 55-60. ISBN: 978-80-01-05882-4.
Detail

KOŠŤÁL, D.; ŠPERKA, P.; SVOBODA, P.; KŘUPKA, I.; HARTL, M. Influence of lubricant inlet film thickness on EHL contact starvation. ASME Transaction, Journal of Tribology, 2017, vol. 139, no. 5, p. 1-10. ISSN: 0742-4787.
Detail

NOVOTNÝ, P.; RAFFAI, P.; DLUGOŠ, J. Virtual Turbocharger Rotor – a Tool for Rotordynamics Solution. In Deterioration Dependability Diagnostics. 1. Brno: Universita Obrany, 2016. p. 29-37. ISBN: 978-80-7231-376-1.
Detail

KOTEK, L.; MUKHAMETZIANOVA, L. Experience with Using Self-Audit Handbook for SMEs in Process and Power Industry. In CHEMICAL ENGINEERING TRANSACTIONS. Chemical Engineering Transactions. Italy: Associazione Italiana di Ingegneria Chemica, 2014. p. 73-78. ISBN: 978-88-95608-27-3. ISSN: 2283-9216.
Detail

KOTEK, L.; MUKHAMETZIANOVA, L.; BLECHA, P.; HOLUB, M. Low Concentration of Oxygen in External Environment - Modeling the Consequences of Accident. In CHEMICAL ENGINEERING TRANSACTIONS. Chemical Engineering Transactions. Italy: Associazione Italiana di Ingegneria Chemica, 2014. p. 73-78. ISBN: 978-88-95608-27-3. ISSN: 2283-9216.
Detail

LOŠÁK, P.; LÉTAL, T.; BUZÍK, J.; NAĎ, M. Oxide Scales Damaging Evaluation. Program in knjiga povzetkov / Program and book of abstracts. 2016. p. 136-136. ISBN: 9789619408803.
Detail

ČÍŽEK, J.; CÉNEK, L.; MATĚJKOVÁ, M.; KOUŘIL, J.; ČUPERA, J.; DLOUHÝ, I. Potential of New-Generation Electron Beam Technology in Interface Modification of Cold and HVOF Sprayed MCrAlY Bond Coats. In Proceedings of SMT30. Milan, Itálie: Politecnico di Milano, 2016. p. 1-5. ISBN: 9782123456803.
Detail

ŠIŠKA, F.; GUO, T.; STRATIL, L.; ČÍŽEK, J.; BARNETT, M. Numerical study of stress distribution and size effect during AZ31 nanoindentation. COMPUTATIONAL MATERIALS SCIENCE, 2017, vol. 126, no. 1, p. 393-399. ISSN: 0927-0256.
Detail

ŠIŠKA, F.; STRATIL, L.; ČÍŽEK, J.; GHADERI, A.; BARNETT, M. Numerical analysis of twin thickening process in magnesium alloys. Acta materialia, 2017, vol. 124, no. 1, p. 9-16. ISSN: 1359-6454.
Detail

BULEJKO, P.; ADAMEC, V.; SCHÜLLEROVÁ, B.; SKEŘIL, R. Levels, source apportionment and health risk assessment of polycyclic aromatic hydrocarbons fixed to airborne particulate matter in areas of Brno city. In Proceeedings of 25th International Scientific Conference of Forensic Engineering Expert Forensic Science 2016, Brno, 29th to 30th of January 2016. Brno: 2016. p. 414-427. ISBN: 978-80-214-5321-0.
Detail

BULEJKO, P.; SVĚRÁK, T.; DOHNAL, M.; KEJÍK, P.; KRIŠTOF, O.; MAYEROVÁ, K. Air filtration using polymeric hollow-fibre membranes. 22nd International Congress of Chemical and Process Engineering CHISA 2016 and the 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2016. Praha: Czech Society of Chemical Engineering, 2016.
Detail

BULEJKO, P.; ADAMEC, V.; SCHÜLLEROVÁ, B.; SKEŘIL, R. Health risk assessment of heavy metals bonded to airborne particulate matter. In Proceedings of 26th International Scientific Conference of Forensic Engineering, Brno, 27th to 28th of January 2017. Brno: 2017. p. 320-326. ISBN: 978-80-214-5459-0.
Detail

ŠTĚPÁNEK, R.; PANTĚLEJEV, L.; MOSTAED, E.; VEDANI, M. Mechanical properties of extruded and ECAP processed magnesium alloy AZ91 at elevated temperature. In Metallography XVI. Materials Science Forum. Švýcarsko: Trans Tech Publications, 2017. p. 366-371. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
Detail

KOUTECKÝ, T.; ZEMAN, J.; KOUTNÝ, D.; PALOUŠEK, D. Effect of titanium dioxide mixture concentration on matte coating and 3D scanning accuracy. In Proceedings - ASPE 2016 Annual Meeting. Portland, Oregon, USA: American Society for Precision Engineering, ASPE, 2016. p. 333-338. ISBN: 9781887706728.
Detail

JEBÁČEK, I.; HORÁK, M. Measuring of a Nose Landing Gear Load during Take-Off and Landing. 21st International Conference ENGINEERING MECHANICS 2015 - Extended abstracts. Engineering Mechanics .... 1. Prague: Institute of Theoretical and Applied Mechanics, Academy of Sciences of the Czech Republic, v.v.i., 2015. p. 120-121. ISBN: 978-80-86246-42-0. ISSN: 1805-8248.
Detail

LÉTAL, T.; SUK, L.; LOŠÁK, P.; BUZÍK, J.; NAĎ, M. Fatigue Analysis of Electric Heating Element. Program in knjiga povzetkov / Program and book of abstracts. 2016. p. 131-131. ISBN: 9789619408803.
Detail

JUŘENA, T.; BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. Numerical Modelling of Combustion in 1.5 Mw Low-nox Burner. In Chemical Engineering Transactions. Chemical Engineering Transactions. Milano, Italy: Aidic Servizi, S.r.l., 2016. p. 1261-1266. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
Detail

BRABLC M., SOVA V., GREPL R. Adaptive Feedforward Controller for a DC Motor Drive based on Inverse Dynamic Model with Recursive Least Squares Parameter Estimation. In Mechatronika (ME), 2016 17th International Conference on Mechatronics. 2016. p. 146-150. ISBN: 9788001058831.
Detail

VEJLUPEK J. Trailer Backing-up Assistant: Using ultrasound sensors based control units to safely back-up the car with trailer. In Mechatronika (ME), 2016 17th International Conference on Mechatronics. 2016. p. 295-300. ISBN: 9788001058831.
Detail

LAMBERSKY V., GREPL R. Benchmark Based Method for Predicting Computing Time of Simulink Model Running on Embedded Target. In Mechatronika (ME), 2016 17th International Conference on Mechatronics. 2016. p. 222-229. ISBN: 9788001058831.
Detail

HRDINA, J.; MATOUŠEK, R. Canadian traveller problem: A note about Game Theory approach. Mendel Journal series, 2014, vol. 2014, no. 1, p. 403-406. ISSN: 1803-3814.
Detail

HRDINA, J.; VAŠÍK, P.; HOLUB, M. Dual numbers arithmentic in multiaxis machine error modeling. MM Science Journal, 2017, vol. 2017, no. 1, p. 1769-1772. ISSN: 1803-1269.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L. Evaluation of total hight of profile of the surface machined by WEDM. MM Science Journal, 2017, vol. 2017, no. 1, p. 1674-1678. ISSN: 1803-1269.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; KALIVODA, M. Quality of aluminium alloy surface after WEDM. MM Science Journal, 2017, vol. 2017, no. 1, p. 1679-1682. ISSN: 1803-1269.
Detail

URBÁN, A.; ZAREMBA, M.; MALÝ, M.; JÓZSA, V.; JEDELSKÝ, J. Droplet dynamics and size characterization of high-velocity airblast atomization. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2017, vol. 95, no. 1, p. 1-11. ISSN: 0301-9322.
Detail

SYMONOV, V.; JURAČKA, J.; LÖFFELMANN, F. Comparison of MSC.Software Failure Models MAT8A, MATD054, and MATD058 of Composite Materials. MECHANICS OF COMPOSITE MATERIALS, 2018, vol. 54, no. 55, p. 591-604. ISSN: 0191-5665.
Detail

JAN, V.; ČUPERA, J.; ŠOHAJ, P.; HAVLÍK, P. Microstructure Evaluation of Heterogeneous Electron Beam Weld between Stabilised Austenitic and ODS Ferritic Steel. Materials Science Forum, 2017, vol. 891, no. 1, p. 185-189. ISSN: 0255-5476.
Detail

PEČ, M.; VOSYNEK, P.; ŠEBEK, F.; NÁVRAT, T. Implementation of American weld connection standards into finite element computations. In 4th International Conference Recent Trends in Structural Materials. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2017. p. 1-7. ISSN: 1757-8981.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; PROKEŠ, T.; HORYNOVÁ, M. Comparison of morphology and topography of surfaces of WEDM machined structural materials. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2017, vol. 2017, no. 104, p. 12-20. ISSN: 0263-2241.
Detail

KAVIČKA, F.; ŠTĚTINA, J.; SEKANINA, B.; MASARIK, M.; ČAMEK, L.; MAUDER, T.; KLIMEŠ, L. Historie tvorby, vývoje a ověření originálního numerického modelu teplotního pole pro proces plynulého odlévání bram provozovaný ve VÍTKOVICE STEEL a.s. Hutnické listy, 2017, roč. LXX (2017), č. 1, s. 4-16. ISSN: 0018-8069.
Detail

KAVIČKA, F.; ŠTĚTINA, J.; KATOLICKÝ, J.; MAUDER, T.; KLIMEŠ, L.; SEKANINA, B. Začlenění dynamického modelu BrDSM teplotního pole plynule odlévané bramy do řídicího systému ve VÍTKOVICE STEEL a.s. Hutnické listy, 2017, roč. LXX (2017), č. 1, s. 17-34. ISSN: 0018-8069.
Detail

NOVÁK, K.; POLZER, S.; KŘIVKA, T.; VLACHOVSKÝ, R.; STAFFA, R.; KUBÍČEK, L.; LAMBERT, L.; BURŠA, J. Correlation between transversal and orthogonal maximal diameters of abdominal aortic aneurysms and alternative rupture risk predictors. COMPUTERS IN BIOLOGY AND MEDICINE, 2017, vol. 83, no. 3, p. 151-156. ISSN: 0010-4825.
Detail

HRDINA, J.; NÁVRAT, A.; VAŠÍK, P.; MATOUŠEK, R. Geometric Control of the Trident Snake Robot Based on CGA. ADV APPL CLIFFORD AL, 2017, vol. 27, no. 1, p. 633-645. ISSN: 0188-7009.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KALIVODA, M.; DVOŘÁK, M. Experimental evaluation of the quality of surface after WEDM for steel X210CR12. MM Science Journal, 2017, vol. 2017, no. 2, p. 1778-1782. ISSN: 1803-1269.
Detail

KAVIČKA, F.; DOBROVSKÁ, J.; STRÁNSKÝ, K.; ŠTĚTINA, J.; KATOLICKÝ, J.; MAUDER, T.; SEKANINA, B. Numerická a experimentální analýza atypického průvalu ocelové bramy v pásmu rovnání při plynulém odlévání ve VÍTKOVICE STEEL a.s. Hutnické listy, 2017, roč. LXX (2017), č. 1, s. 47-59. ISSN: 0018-8069.
Detail

KAVIČKA, F.; DOBROVSKÁ, J.; STRÁNSKÝ, K.; DOBROVSKÁ, V.; FRANCOVÁ, H. Originální numerický model chemické heterogenity plynule lité ocelové bramy a jeho spojení s numerickým modelem teplotního pole. Hutnické listy, 2017, roč. LXX (2017), č. 1, s. 35-46. ISSN: 0018-8069.
Detail

BALÁŠ, M.; LISÝ, M.; KRACÍK, P.; POSPÍŠIL, J. Municipal solid waste gasification within waste-to energy processing. MM Science Journal, 2017, vol. 2, no. 2, p. 1783-1788. ISSN: 1805-0476.
Detail

BUZÍK, J.; LÉTAL, T.; JEGLA, Z.; LOŠÁK, P.; NAĎ, M. Možnosti aplikace výsledků experimentů pro verifikaci a validaci numerických modelů při výpočtech vibrací vyvolaných prouděníma. In Sborník konference Kotle a energetická zařízení 2017. Kotle a energetická zařízení. 2017. s. 270-278. ISSN: 1804-6673.
Detail

NOVOTNÝ, P. Mixed Lubrication Solution of Dynamically Loaded Radial Slide Bearings. Tribology in Industry, 2017, vol. 39, no. 1, p. 82-89. ISSN: 0354-8996.
Detail

KOŠŤÁL, D.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Experimental comparison of the behavior between base oil and grease starvation based on inlet film thickness. Tribology in Industry, 2017, vol. 2017, no. 1, p. 110-119. ISSN: 0354-8996.
Detail

KOUTECKÝ, T.; ZIKMUND, T.; GLITTOVÁ, D.; PALOUŠEK, D.; ŽIVČÁK, J.; KAISER, J. X-ray micro-CT measurement of large parts at very low temperature. Review of Scientific Instruments, 2017, vol. 88, no. 3, p. 033707-1 (033707-6 p.)ISSN: 0034-6748.
Detail

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Transition from plug-flow to linear speed profile near a dent in a rolling–sliding EHL contact. Tribology International, 2016, vol. 100, no. 1, p. 344-350. ISSN: 0301-679X.
Detail

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Lubricant flow in thin-film elastohydrodynamic contact under extreme conditions. Friction, 2016, vol. 4, no. 4, p. 380-390. ISSN: 2223-7690.
Detail

FICZA, I.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Effect of Kinematic Operating Conditions on Ridge Deformation—Numerical Study With Experimental Comparison. ASME Transaction, Journal of Tribology, 2017, vol. 139, no. 3, p. 031502-031509. ISSN: 0742-4787.
Detail

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Prediction of Shallow Indentation Effects in a Rolling-Sliding EHL Contact Based on Amplitude Attenuation Theory. Tribology Online, 2017, vol. 12, no. 1, p. 1-7. ISSN: 1881-2198.
Detail

KŘUPKA, I.; ŠPERKA, P.; HARTL, M. Effect of surface roughness on lubricant film breakdown and transition from EHL to mixed lubrication. Tribology International, 2016, vol. 100, no. 1, p. 116-125. ISSN: 0301-679X.
Detail

HIMR, D.; HABÁN, V.; HUDEC, M. Experimental investigation of check valve behaviour during the pump trip. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. IOP Publishing, 2017. p. 1-5. ISSN: 1742-6588.
Detail

JECHA, D.; JÍCHA, J.; GAL, P.; STEHLÍK, P. Selective Non-catalytic Reduction (SNCR) and its Efficiency with Respect to Various Combustion Parameters. Chemical Engineering Transactions, 2017, vol. 2017, no. 56, p. 1915-1920. ISSN: 2283-9216.
Detail

HRABEC, D.; VIKTORÍN, A.; ŠOMPLÁK, R.; PLUHÁČEK, M.; POPELA, P. A HEURISTIC APPROACH TO THE FACILITY LOCATION PROBLEM FOR WASTE MANAGEMENT: A CASE STUDY. Mendel Journal series, 2016, vol. 2016, no. 1, p. 61-66. ISSN: 1803-3814.
Detail

PALOUŠEK, D.; PANTĚLEJEV, L.; ZIKMUND, T.; KOUTNÝ, D. PROCESSING OF NEARLY PURE IRON USING 400W SELECTIVE LASER MELTING – INITIAL STUDY. MM Science Journal, 2017, vol. 2017, no. 1, p. 1-6. ISSN: 1803-1269.
Detail

BRUMMER, V.; LEŠTINSKÝ, P.; JECHA, D. Matematický model poloprovozního reaktoru pro odstranění VOC. In TVIP 2017. Hustopeče: CEMC, 2017. s. 106-1 (106-11 s.)ISBN: 978-80-85990-30-0.
Detail

HUDÁK, I.; BĚLOHRADSKÝ, P.; SKRYJA, P.; JÍCHA, J. The Effect of Inert Fuel Compounds on Flame Characteristics. In Proceedings of the 8th European Combustion Meeting. Zagreb: Adria Section of the Combustion Institute (ASCI), 2017. p. 457-462. ISBN: 978-953-59504-1-7.
Detail

BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I.; JÍCHA, J. The experimental study of the gas staging in the combination with the internal flue gas recirculation on combustion parameters. In Proceedings of the 8th European Combustion Meeting. Zagreb: Adria Section of the Combustion Institute (ASCI), 2017. p. 396-401. ISBN: 978-953-59504-1-7.
Detail

ŠOMPLÁK, R.; SZÁSZIOVÁ, L.; SMEJKALOVÁ, V.; NEVRLÝ, V.; MÁLEK, M.; PAVLAS, M. Současné toky a zpracování spalitelných odpadů v ČR. In Sborník konference. Praha: CEMC, 2017. s. 1-10. ISBN: 978-80-85990-30-0.
Detail

HANUSOVÁ, P.; ČUPERA, J.; DLOUHÝ, I. Reactions in Ternary System Al-B2O3-C during Mechanical Alloying. Metallography 16. 2016. p. 124-124. ISBN: 978-80-553-2547-7.
Detail

HANUSOVÁ, P.; DLOUHÝ, I. Reactions in Ternary System Al-B2O3-C during Mechanical Alloying. Materials Science Forum, 2017, no. 891, p. 522-525. ISSN: 0255-5476.
Detail

SKRYJA, P.; BĚLOHRADSKÝ, P.; HUDÁK, I.; JÍCHA, J. The Utilization of Pyrolysis Fuel in Industrial Burner. In Proceedings of the 8th European Combustion Meeting. Zagreb: 8th european, 2017. p. 463-468. ISBN: 978-953-59504-1-7.
Detail

JANDOUREK, P.; POCHYLÝ, F.; HABÁN, V. Valve exploiting the principle of a side channel turbine. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. IOP Publishing, 2017. p. 1-5. ISSN: 1742-6588.
Detail

HNÍZDIL, M.; KOTRBÁČEK, P. Heat treatment of rails. Materiali in tehnologije, 2017, vol. 51, no. 2, p. 329-332. ISSN: 1580-2949.
Detail

MORAVČÍK, I.; ČÍŽEK, J.; ZAPLETAL, J.; KOVACOVA, Z.; VESELY, J.; MINÁRIK, P.; KITZMANTECH, M.; NEUBAUER, E.; DLOUHÝ, I. Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0,5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering. MATERIALS & DESIGN, 2017, vol. 119, no. 1, p. 141-151. ISSN: 1873-4197.
Detail

STRAKA, L.; DRAHOKOUPIL, J.; VEŘTÁT, P.; KOPEČEK, J.; ZELENÝ, M.; SEINER, H.; HECZKO, O. Orthorhombic intermediate phase originating from {110} nanotwinning in Ni50.0Mn28.7Ga21.3 modulated martensite. Acta materialia, 2017, vol. 132, no. -, p. 335-344. ISSN: 1359-6454.
Detail

KUČERA, P.; PÍŠTĚK, V. VIBRACE HNACÍHO TRAKTU NÁKLADNÍHO VOZIDLA. Perners' Contacts, 2017, roč. XII, č. 1, s. 123-130. ISSN: 1801-674X.
Detail

PÍŠKA, M.; SLIWKOVÁ, P. Nová metodika hodnocení řezných vlastností nástrojů. MM Průmyslové spektrum, 2017, č. 5, s. 38-39. ISSN: 1212-2572.
Detail

KANDEVA, M. KARASTOYANOV, D., NIKOLCHEVA, G. STOJANOVIĆ, B., SVOBODA, P., VENCL, A. Tribological studies on copper-based friction linings. In 15th International Conference on Tribology, SERBIATRIB ‘17. 1. Kragujevac (Serbia): 2017. p. 51-60. ISBN: 978-86-6335-041-0.
Detail

KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J.; ŠEBEK, F. Simulation of the small punch test of AISI 316L austenitic steel. In Engineering Mechanics 2017. 2017. p. 542-545. ISBN: 978-80-214-5497-2.
Detail

ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Ductile fracture criteria implementation and calibration using the tension–torsion tests. In Engineering Mechanics 2017. 2017. p. 854-857. ISBN: 978-80-214-5497-2.
Detail

KUČERA, P.; PÍŠTĚK, V. SHAFT VIBRATION OF THE TRUCK. In Engineering Mechanics 2017. 1. Brno University of Technology, 2017. p. 546-549. ISBN: 978-80-214-5497-2.
Detail

ZAPLETAL, T.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. The effect of surface grooves on transition to mixed lubrication. Tribology International, 2017, vol. 114, no. 1, p. 409-417. ISSN: 0301-679X.
Detail

ZACHAR, M.; GUZEJ, M.; HORSKÝ, J. NUMERICAL THERMAL COMPARISON OF HEAT SINK MATERIALS FOR AUTOMOTIVE LED HEADLAMPS. In ENGINEERING MECHANICS 2017. 2017. p. 1078-1081. ISBN: 978-80-214-5497-2.
Detail

JURAČKA, J. Specifics of Aerostructures Experimental Testing. In Engineering Mechanics 2017. Engineering Mechanics .... 1st. Praha: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, DOLEJSKOVA 5, PRAGUE 8, 182 00, CZECH REPUBLIC, 2017. p. 46-49. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
Detail

BUZÍK, J.; LÉTAL, T.; JEGLA, Z. Význam metod verifikace a validace výsledků z CFD analýz při výpočtech vibrací vyvolaných prouděním pro návrh zařízení na výměnu tepla. All for Power, 2017, roč. 11, č. 2, s. 114-116. ISSN: 1802-8535.
Detail

BULEJKO, P.; DOHNAL, M.; POSPÍŠIL, J.; KRIŠTOF, O.; KEJÍK, P.; SVĚRÁK, T. Efficiency of hollow-fiber membranes for air filtration of submicron particles. In 44th International Conference of the Slovak Society of Chemical Engineering. 2017. p. 495-499. ISBN: 978-80-89597-58-1.
Detail

BŘEZINA, L.; LOŠÁK, P. Model of car suspension with parametric uncertainty. In Engineering mechanics 2017. 2017. p. 214-217. ISBN: 978-80-214-5497-2.
Detail

APPEL, M.; GREPL, R. PARAMETER ESTIMATION FOR ENGINEERS: A NEW TOOL FOR EFFECTIVE SEARCH FOR SIMULINK MODEL PARAMETERS. In ENGINEERING MECHANICS 2017. 2017. Brno: Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, 2017. p. 90-93. ISBN: 978-80-214-5497-2.
Detail

TRÁVNÍČEK, P.; KOTEK, L.; JUNGA, P. Modelling of consequences of biogas leakage from gasholder. Journal of Central European Agriculture, 2017, vol. 18, no. 1, p. 15-28. ISSN: 1332-9049.
Detail

KOTRBÁČEK, P.; HORSKÝ, J. ENERGETICKY ÚSPORNÉ SYSTÉMY PRO CHLAZENÍ HORKÝCH POVRCHŮ A TEPELNÉ ZPRACOVÁNÍ KOVŮ. Sborník anotací semináře efektivní energetika XVIII. VŠB-Technická univerzita Ostrava: Ediční středisko VŠB-TU Ostrava, 2017. s. 5-7.
Detail

MAUDER, T.; ŠTĚTINA, J.; KLIMEŠ, L.; MASARIK, M. QUALITY IMPROVEMENT OF CONTINUOUSLY CAST SPECIAL STEEL BY USING NUMERICAL-OPTIMIZATION MODEL. In Sborník konference METAL 2017. Ostrava, Česká Republika: TANGER Ltd., 2017. p. 52-58. ISBN: 978-80-87294-79-6.
Detail

ONDRA, M.; ŠKAROUPKA, D.; RAJLICH, J. Innovating product appearance within brand identity. International Journal of Innovation Science, 2017, vol. 9, no. 2, p. 153-169. ISSN: 1757-2223.
Detail

JENÍK, I.; KUBÍK, P.; ŠEBEK, F.; HŮLKA, J.; PETRUŠKA, J. Sequential simulation and neural network in the stress–strain curve identification over the large strains using tensile test. ARCHIVE OF APPLIED MECHANICS, 2017, vol. 87, no. 6, p. 1077-1093. ISSN: 0939-1533.
Detail

BULEJKO, P.; ADAMEC, V.; SKEŘIL, R.; SCHÜLLEROVÁ, B. BENCKO, V. Levels and health risk assessment of PM10 aerosol in Brno, Czech Republic. Central European Journal of Public Health, 2017, vol. 25, no. 2, p. 129-134. ISSN: 1803-1048.
Detail

KANDEVA, M. KARASTOYANOV, D., NIKOLCHEVA, G. STOJANOVIĆ, B., SVOBODA, P., VENCL, A. Tribological studies on copper-based friction linings. Tribology in Industry, 2017, vol. 39, no. 2, p. 228-237. ISSN: 0354-8996.
Detail

KLÍMA, J.; ONDRŮŠEK, Č. Vliv proměnné délky vzduchové mezery u vysokootáčkového asynchronního motoru s masivním rotorem. Elektrorevue - Internetový časopis (http://www.elektrorevue.cz), 2017, roč. 19, č. 2, s. 39-45. ISSN: 1213-1539.
Detail

BENEŠOVSKÝ, M.; NÁVRAT, T.; PETRUŠKA, J. Verification of fast algorithm for cross-roll straightening. In Engineering Mechanics 2017. 2017. p. 134-137. ISBN: 978-80-214-5497-2.
Detail

CHOUDHURY, D.; VRBKA, M.; MAMAT, A.B.; STAVNESS, I.; ROY, CH.K.; MOOTANAH, R.; KŘUPKA, I. The impact of surface and geometry on coefficient of friction of artificial hip joints. Journal of the mechanical behavior of biomedical materials, 2017, vol. 72, no. 8, p. 192-199. ISSN: 1751-6161.
Detail

KRAJŇÁKOVÁ, P.; DLOUHÝ, I.; ČÍŽEK, J.; ČUPERA, J.; SHVAB, R. Effect of Double Electron beam Remelting on Microstructure of HVOF and CGDS Bond Coat. In Metallography XVI. Materials Science Forum. Zurich, Switzerland: Trans tech Publications Ltd, 2017. p. 574-578. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
Detail

VOTAVOVÁ, H.; POHANKA, M. EFFECT OF THE SPEED OF FEEDSTOCK ON HEAT TRANSFER COEFFICIENT DURING DESCALING IN HOT ROLLING. In Sborník konference METAL 2017. Ostrava: Tanger, Ostrava, 2017. p. 261-266. ISBN: 978-80-87294-73-4.
Detail

MORAVČÍK, I.; ČÍŽEK, J.; KOVACOVA, Z.; HORNÍK, V.; KUBĚNA, I.; KITZMANTEL, E.; NEJEZCHLEBOVÁ, J.; NEUBAUER, E.; DLOUHÝ, I. Mechanical and Microstructural Characterization of Powder Metallurgy CoCrNi Medium Entropy Alloy. Materials Science and Engineering A, 2017, vol. 2017, no. 701, p. 370-380. ISSN: 0921-5093.
Detail

RANUŠA, M.; GALLO, J.; HOBZA, M.; VRBKA, M.; NEČAS, D.; HARTL, M. Opotřebení a drsnost artikulačního povrchu u extrahovaných polyetylénů jamky Bicon-Plus. Acta Chirurgie Orthopaedicae et Traumatologie Čechoslovaca, 2017, roč. 84, č. 3, s. 159-167. ISSN: 0001-5415.
Detail

BOCCACCINI, D.; ŠEVEČEK, O.; FRANDSEN, H.; DLOUHÝ, I.; MOLIN, S.; HJELM, J.; CANNIO, M.; HENDRIKSEN, P. Determination of the bonding strength in solid oxide fuel cells’ interfaces by Schwickerath crack initiation test. Journal of the European Ceramic Society, 2017, vol. 2017, no. 37, p. 3565-3578. ISSN: 0955-2219.
Detail

ZEJDA, V.; BĚLOHRADSKÝ, P.; HOUDKOVÁ, L. Experimentální model vyhnívací nádrže ČOV. In TVIP 2017. Hustopeče: CEMC, 2017. s. 160-1 (160-6 s.)ISBN: 978-80-85990-30-0.
Detail

ŠUBRT, K.; HOUŠKA, P.; KNOFLÍČEK, R. Model of Energetic Efficient Redundant Actuation. Solid State Phenomena, 2017, no. 260, p. 132-139. ISSN: 1012-0394.
Detail

ŠTĚTINA, J.; KAVIČKA, F.; KATOLICKÝ, J.; MAUDER, T.; KLIMEŠ, L. Numerical Off-line Model of Temperature Field of a Continuously Cast Billet and its Preparation. Hutnické listy, 2017, vol. 70, no. 3, p. 4-17. ISSN: 0018-8069.
Detail

ŠTĚTINA, J.; KAVIČKA, F.; KATOLICKÝ, J.; MAUDER, T.; KLIMEŠ, L. Dynamic On-line Model of Temperature Field for Continuous Steel Billet Casting and its Integration into the Control System of the Caster. Hutnické listy, 2017, vol. 70, no. 3, p. 18-28. ISSN: 0018-8069.
Detail

ŠTĚTINA, J.; KAVIČKA, F.; KATOLICKÝ, J.; MAUDER, T.; KLIMEŠ, L. Parametric Study of Continuously Cast Steel Billet 150 x 150 mm. Hutnické listy, 2017, vol. 70, no. 3, p. 29-39. ISSN: 0018-8069.
Detail

ASTROUSKI, I.; RAUDENSKÝ, M.; DOHNAL, M. FOULING OF POLYMERIC HOLLOW FIBER HEAT EXCHANGER BY ASHRAE 52.1 TEST DUST. Heat Exchanger Fouling and Cleaning XI - 2017. 2017.
Detail

VONDRA, M.; MÁŠA, V.; BOBÁK, P. The energy performance of vacuum evaporators for liquid digestate treatment in biogas plants. Energy, 2018, no. 146, p. 141-155. ISSN: 0360-5442.
Detail

POHANKA, M.; VOTAVOVÁ, H.; RAUDENSKÝ, M.; HWANG, J. Y.; YOU, J. W.; LEE, S. H. THE EFFECT OF WATER TEMPERATURE ON COOLING DURING HIGH PRESSURE WATER DESCALING. Thermal Science, 2018, vol. 6, no. 22, p. 2965-2971. ISSN: 0354-9836.
Detail

HALABUK, D.; NÁVRAT, T.; VLK, M. The issue of recommended hole diameters in ASTM E837-13a. In Experimental Stress Analysis 2017. Košice: Technical University of Košice, 2017. p. 8-14. ISBN: 978-80-553-3166-9.
Detail

FRIÁK, M.; VŠIANSKÁ, M.; HOLEC, D.; ZELENÝ, M.; ŠOB, M. Tensorial elastic properties and stability of interface states associated with Sigma 5(210) grain boundaries in Ni-3(Al,Si). SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2017, vol. 18, no. 1, p. 273-282. ISSN: 1468-6996.
Detail

RUBEŠ, O.; HADAŠ, Z. Designing, Modelling and Testing of Vibration Energy Harvester with Nonlinear Stiffness. In Proceedings of SPIE - The International Society for Optical Engineering. Proceedings of SPIE. 10246. Barcelona: SPIE, 2017. p. 102460W-1 (102460W-9 p.)ISBN: 9781510609938. ISSN: 0277-786X.
Detail

HADAŠ, Z.; SMILEK, J.; RUBEŠ, O. Analyses of electromagnetic and piezoelectric systems for efficient vibration energy harvesting. In Proceedings of SPIE - The International Society for Optical Engineering. Proceedings of SPIE. 10246. Barcelona: SPIE, 2017. p. 1024619-1 (1024619-8 p.)ISBN: 9781510609938. ISSN: 0277-786X.
Detail

POKORNÝ, J.; FIŠER, J.; FOJTLÍN, M.; KOPEČKOVÁ, B.; TOMA, R.; SLABOTINSKÝ, J.; JÍCHA, M. Verification of Fiala-based human thermophysiological model and its application to protective clothing under high metabolic rates. BUILDING AND ENVIRONMENT, 2017, vol. 126, no. 2017, p. 13-26. ISSN: 0360-1323.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J.; BENEŠ, L.; ZAHRADNÍČEK, R. Analysis of the surface morphology and topography of pure aluminium machined using WEDM. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2018, vol. 2018, no. 114, p. 169-176. ISSN: 0263-2241.
Detail

PROKOP, A.; ŘEHÁK, K. VIRTUAL PROTOTYPE APPLICATION TO HEAVY-DUTY VEHICLE GEARBOX CONCEPT. In Engineering Mechanics 2017. 1. 2017. p. 810-813. ISBN: 978-80-214-5497-2.
Detail

PROKOP, A.; ZUBÍK, M.; ŘEHÁK, K.; NOVOTNÝ, P. Approach for Assessment of Experimental Gearbox NVH Parameters. In FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY V. 1. Hong Kong, PEOPLES R CHINA: DESTECH PUBLICATIONS, INC, 439 DUKE STREET, LANCASTER, PA 17602-4967 USA, 2015. p. 266-271. ISBN: 978-1-60595-270-3.
Detail

PROKEŠ, T.; MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; ANDRŠ, O. Cutting Insert Wear Analysis Using Industry 4.0. In Mechatronics 2017, Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing. Brno: Springer, Cham, 2018. p. 133-140. ISBN: 978-3-319-65960-2. ISSN: 2194-5357.
Detail

KŠICA, F.; VETIŠKA, J.; HADAŠ, Z. Methodology for predicting dynamic behaviour of machine tools based on a virtual model. In Engineering Mechanics 2017. Engineering Mechanics .... 1. Svratka: Brno University of Technology, Faculty of Mechanical Engineering, Institute of Solid Mechanics, Mechatronics and Biomechanics, 2017. p. 534-537. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
Detail

PROCHÁZKOVÁ, J. Free form deformation methods - the theory and practice. In Aplimat 2017 - Proceedings of 16th Conference of Applied Mathematics. Aplimat. Bratislava, Slovak republic: Slovak University of Technology Bratislava, 2017. p. 1276-1283. ISBN: 9781510836983.
Detail

PROCHÁZKOVÁ, J.; MRKVIČKA, D. Solar potential evaluation from point cloud data. In Enterprise and Competitive Environment: Conference Proceedings. Brno: Mendlova univerzita v Brně, 2017. p. 702-711. ISBN: 978-80-7509-499-5.
Detail

POCHYLÝ, F.; RUDOLF, P.; HALUZA, M.; HABÁN, V.; HUDEC, M.; ŠTEFAN, D.; ČUPR, P. Vývoj vírové turbíny v násoskovém uspořádání.
Detail

KOUTNÍK, T.; DOUPNÍK, P. Computational mesh and rans model of turbulence sensitivity in CFD optimization of slotted flap. konference Research and Education in Aircraft Design 2016, Varšava, Polsko: 2016.
Detail

MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T.; BEDNÁŘ, J.; HRABEC, P. Optimalization of WEDM settings parameters when machining pure aluminium using DoE. MM Science Journal, 2017, vol. 2017, no. 4, p. 2105-2108. ISSN: 1803-1269.
Detail

Pavel Manas, Radek Vrana, Zdenek Hejmal, Branislav Dubec. Determination of the Material Properties of Recycled Rubber for Explicit FEM Simulation. Key Engineering Materials (CD), 2017, no. 755, p. 1-7. ISSN: 1662-9809.
Detail

VĚCHET, S.; KREJSA, J.; HRBÁČEK, J., CHEN, K.S. Probabilistic Reasoning in Diagnostic Expert System for Smart Homes. In Advances in Intelligent Systems and Computing. 2018. p. 708-715. ISBN: 978-3-319-65959-6.
Detail

Jana Müllerová, Josef Brůna, Tomáš Bartaloš, Petr Dvořák, Michaela Vítková, Petr Pyšek. Timing Is Important: Unmanned Aircraft vs. Satellite Imagery in Plant Invasion Monitoring. Frontiers in Plant Science, 2017, vol. 8, no. Article 887, p. 1-13. ISSN: 1664-462X.
Detail

GALAS, R.; KVARDA, D.; OMASTA, M.; KŘUPKA, I.; HARTL, M. The role of constituents contained in water–based friction modifiers for top–of–rail application. Tribology International, 2018, vol. 117, no. 1, p. 87-97. ISSN: 0301-679X.
Detail

HÁJEK, J.; JEGLA, Z. Standards for fired heater design: Analysis of two dominant heat flux variation factors. Applied Thermal Engineering, 2017, vol. 125, no. 1, p. 702-713. ISSN: 1359-4311.
Detail

ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. The performance and prediction ability of advanced approach to ductile fracture. In Proceedings of the XIV International Conference on Computational Plasticity – Fundamentals and Applications. 2017. p. 588-595. ISBN: 978-84-946909-6-9.
Detail

ŽÁK, L.; VALIŠ, D. Finding the Optimal Time for Preventive Maintenance Using Linear Regression. In MENDEL 2016, 22th International Conference on Soft Computing. Brno, CZ: Brno, University of Technology, 2016. p. 235-240. ISBN: 978-80-214-5365-4.
Detail

VALIŠ, D.; HASILOVÁ, K.; ŽÁK, L. Combustion engine condition estimation based on indirect diagnostics data. In Risk, Reliability and Safety: Innovating Theory and Practice. London: Taylor & Francis Group, 2016. p. 1930-1936. ISBN: 978-1-138-02997-2.
Detail

VALIŠ, D.; ŽÁK, L.; VINTR, Z.; HASILOVÁ, K. Mathematical Analysis of Soot Particles in Oil Used as System State Indicator. In IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2016. Bali, Indonesia: IEEE, 2016. p. 147-151. ISBN: 978-1-5090-3664-6.
Detail

ŽÁK, L.; VALIŠ, D.; VINTR, Z.; HASILOVÁ, K. Mathematical modelling of soot particles in oil. In Safety and Reliability:Theory and Application, ESREL 2017. London: Taylor & Francis Group, 2017. p. 719-726. ISBN: 978-1-138-62937-0.
Detail

NÁVRAT, T.; HALABUK, D.; VLK, M.; VOSYNEK, P. Eccentricity Effect in the Hole-Drilling Residual Stress Measurement. In Engineering and Innovative Materials VI. Defect and Diffusion Forum. Trans Tech Publications Ltd, 2018. p. 208-212. ISBN: 978-3-0357-1209-4. ISSN: 1662-9507.
Detail

CHABIČOVSKÝ, M.; HORSKÝ, J. FACTORS INFLUENCING SPRAY COOLING OF HOT STEEL SURFACES. In Sborník konference METAl 2017. Ostrava: Tanger, Ostrava, 2017. p. 77-83. ISBN: 978-80-87294-79-6.
Detail

BRUMMER, V.; BĚLOHRADSKÝ, P.; MÁŠA, V. Optimization of Egg White Removal from Waste Egg Shells and Membranes by Design of Experiments for their Refinement. In CHEMICAL ENGINEERING TRANSACTIONS. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2017. p. 0496-01 (0496-06 p.)ISBN: 978-88-95608-51-8. ISSN: 2283-9216.
Detail

BRUMMER, V.; LEŠTINSKÝ, P.; JECHA, D. Matematický model poloprovozního reaktoru pro odstranění VOC. Waste forum, 2017, roč. 2017, č. 3, s. 188-198. ISSN: 1804-0195.
Detail

MATLÁK, J.; FORET, R.; DLOUHÝ, I. Influence of the beam deflection od properties of the electron beam hardened layer. In International Scientific Journal "Material Science" "Nonequilibrium Phase Transformations". Materials Science. Non-Equilibrium Phase Transformations. 2017. p. 194-197. ISSN: 2367-749X.
Detail

Pavel Manas, Radek Vrana, Zdenek Hejmal, Branislav Dubec. Determination of the Material Properties of Recycled Rubber for Explicit FEM Simulation. In Structural and Mechanical Engineering for Security and Prevention. Trans Tech Publications Ltd, 2017. p. 1-7. ISBN: 978-3-0357-1236-0.
Detail

MAHMOUD, H.; VLAŠIC, F.; MAZAL, P.; JÁNA, M. Leakage Analysis of Pneumatic Cylinders Using Acoustic Emission. INSIGHT, 2017, vol. 59, no. 9, p. 500-505. ISSN: 1354-2575.
Detail

MÁŠA, V.; STEHLÍK, P.; HAVLÁSEK, M. A Complex Approach to the Energy Efficiency of Buildings and Processes in Industrial and Municipal Areas. In CHEMICAL ENGINEERING TRANSACTIONS. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi S.r.l., 2017. p. 1081-1086. ISBN: 978-88-95608-51-8. ISSN: 2283-9216.
Detail

HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; LEE, T. Heat Transfer during Spray Cooling of Flat Surfaces with Water at Large Reynolds Numbers. Journal of Flow Control, Measurement & Visualization, 2016, vol. 4, no. 3, p. 104-113. ISSN: 2329-3330.
Detail

POCHYLÝ, F.; HALUZA, M.; FIALOVÁ, S.; DOBŠÁKOVÁ, L.; VOLKOV, A.V.; PARYGIN, A.G.; NAUMOV, A.V.; VIKHLYANTSEV, A.A.; DRUZHININ, A.A. Application of Heterogeneous Blading Systems Is the Way for Improving Efficiency of Centrifugal Energy Pumps. Thermal Engineering (English translation of Teploenergetika), 2017, vol. 64, no. 11, p. 794-801. ISSN: 0040-6015.
Detail

M. KANDEVA, V. BALABANOV, E. ZADOROZHNAYA, ZH. KALITCHIN, P. SVOBODA. Environmental Protection by Self-organisation of Tribosystems with Self-lubricating Materials in Dry Friction. Part I. Investigations at Different Loads. J ENVIRON PROT ECOL, 2017, vol. 18, no. 3, p. 1050-1069. ISSN: 1311-5065.
Detail

M. KANDEVA, D. KARASTOYANOV, Zh. KALITCHIN, P. SVOBODA. TRIBOLOGICAL STUDIES OF HIGH VELOCITY OXYGEN FUEL (HVOF) SUPERALLOY COATINGS. In Beijing, China: 2017. p. 1-16.
Detail

PROKOP, A.; KOPEČKOVÁ, B.; ŘEHÁK, K. Dynamic Analysis of Single Stage Gearbox Focused on Input Parameters Influence. In Transport Means 2017. Transport Means. Kaunas Lithuania: 2017. p. 479-484. ISSN: 1822-296X.
Detail

ŘEHÁK, K.; KOPEČKOVÁ, B.; PROKOP, A. Dynamic Analysis of Single Stage Gearbox with Backlash Influence. In Transport Means 2017. Transport Means. Kaunas Lithuania: 2017. p. 575-579. ISSN: 1822-296X.
Detail

DOUPOVEC, M.; KUREK, J.; MIKULSKI, W. Vertical functors on fibered manifolds. DIFFERENTIAL GEOMETRY AND ITS APPLICATIONS, 2017, vol. 54, no. A, p. 100-110. ISSN: 0926-2245.
Detail

HRABEC, D.; ŠOMPLÁK, R.; NEVRLÝ, V.; JANOŠŤÁK, F.; ROSECKÝ, M.; KŮDELA, J. Robust Facility Location Problem for Bio-waste Transportation. Chemical Engineering Transactions, 2017, vol. 2017, no. 61, p. 1093-1098. ISSN: 2283-9216.
Detail

HALABUK, D.; NÁVRAT, T. Thermomechanical assessment of fuel rod cladding made of zirconium alloy and silicon carbide material during reactivity-initiated accident. NUCLEAR SCIENCE AND ENGINEERING, 2018, vol. 189, no. 1, p. 69-81. ISSN: 0029-5639.
Detail

PÍŠTĚK, V.; KLIMEŠ, L.; MAUDER, T.; KUČERA, P. Optimal design of structure in rheological models: an automotive application to dampers with high viscosity silicone fluids. Journal of Vibroengineering, 2017, vol. 19, no. 6, p. 4459-4470. ISSN: 1392-8716.
Detail

ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Lode dependent plasticity coupled with nonlinear damage accumulation for ductile fracture of aluminium alloy. Materials & Design, 2018, vol. 137, no. 1, p. 90-107. ISSN: 0264-1275.
Detail

HUZLÍK, R.; LOŠÁK, P.; KURFŰRST, J.; ONDRŮŠEK, Č. Modification of Frame for Synchronous Machine with Permanent Magnet. In Mechatronics 2017 Recent Technological and Scientific Advances. Berlín: Springer Verlag, 2018. p. 296-301. ISBN: 978-3-319-65959-6.
Detail

MÁŠA, V.; BOBÁK, P.; VONDRA, M. Potential of gas microturbines for integration in commercial laundries. Operational Research, 2017, vol. 17, no. 3, p. 849-866. ISSN: 1109-2858.
Detail

KRYSTÝNOVÁ, M.; DOLEŽAL, P.; FINTOVÁ, S.; BŘEZINA, M.; ZAPLETAL, J.; WASSERBAUER, J. Preparation and Characterization of Zinc Materials Prepared by Powder Metallurgy. Metals, 2017, vol. 7, no. 396, p. 1-15. ISSN: 2075-4701.
Detail

KŮDELA, J.; POPELA, P.; ŠOMPLÁK, R.; MÁLEK, M.; RYCHTÁŘ, A.; HRABEC, D. The L-shaped Method for Large-scale Mixed-integer Waste Management Decision Making Problems. Chemical Engineering Transactions, 2017, vol. 61, no. 1, p. 1087-1092. ISSN: 2283-9216.
Detail

KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P.; PALOUŠEK, D. Fatigue Behaviour Evaluation of Additively and Conventionally Produced Materials by Acoustic Emission Method. In 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017. Procedia Structural Integrity. Funchal, Madeira, Portugal: Elsevier B.V., 2017. p. 393-400. ISSN: 2452-3216.
Detail

KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P.; PALOUŠEK, D.; PANTĚLEJEV, L. Analysis of fatigue processes of SLM materials by acoustic emission. International Journal of Microstructure and Materials Properties, 2018, vol. 17, no. 3, p. 193-205. ISSN: 1741-8410.
Detail

MAZAL, P.; MAHMOUD, H.; VLAŠIC, F. CONDITION MONITORING OF PNEUMATIC CYLINDERS BY ACOUSTIC EMISSION. In APPLICATION OF CONTEMPORARY NON-DESTRUCTIVE TESTING IN ENGINEERING. Ljubljana, Slovenija: University of Ljubljana, 2017. p. 231-238. ISBN: 978-961-93537-3-8.
Detail

LOŠÁK, P.; LÉTAL, T.; BUZÍK, J.; NAĎ, M. Leakage cause analysis of a flange joint designed according to standards. 25th INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana: Institute of Metals and Technology, Ljubljana, Slovenia, 2017. p. 123-123. ISBN: 978-961-94088-1-0.
Detail

HANUSOVÁ, P.; DLOUHÝ, I. MECHANICAL ALLOYING AS A WAY TO PRODUCE ALUMINUM MATRIX COMPOSITE WITH TiB2 PARTICLES AS A REINFORCEMENT. In 26th International Conference on Metallurgy and Materials. Ostrava: Tanger Ltd., 2018. p. 1726-1731. ISBN: 9788087294796.
Detail

POPELA, P.; MATOUŠEK, R.; KŮDELA, J. Heuristic approaches to stochastic quadratic assignment problem: VO and MM cases. In Proceedings of 22nd International Conference on Soft Computing MENDEL 2016. Mendel Journal series. Brno, Czech Republic: Brno University of Technology, 2016. p. 117-122. ISBN: 978-80-214-5365-4. ISSN: 1803-3814.
Detail

NAĎ, M.; JEGLA, Z.; LÉTAL, T.; LOŠÁK, P.; BUZÍK, J. Thermal load non-uniformity estimation for superheater tube bundle damage evaluation. Machine Modeling And Simulations MMS 2017. Žilina: EDIS (Editing Centre of University of Žilina), 2017. p. 30-30. ISBN: 9788055413600.
Detail

MALÝ, M.; JANÁČKOVÁ, L.; JEDELSKÝ, J.; JÍCHA, M. Influence of operating conditions and atomizer design on circumferential liquid distribution from small pressure-swirl atomizer. In EPJ Web of Conferences. EPJ Web of Conferences. EDP Sciences, 2017. p. 1-4. ISSN: 2100-014X.
Detail

KLIMEŠ, L.; CHARVÁT, P.; HEJČÍK, J. Solar energy driven airflow: solar chimneys vs. PV powered fans. In ISSN 1847-7186 (book of abstracts) ISSN 1847-7178 (digital proceedings). Proceedings of SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems. Zagreb, Croatia: Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. p. 1-11. ISSN: 1847-7178.
Detail

ZELENÝ, M.; SOZINOV, A.; BJÖRKMAN, T.; STRAKA, L.; HECZKO, O.; NIEMINEN, R. Effect of Magnetic Ordering on the Stability of Ni–Mn–Ga(–Co–Cu) Alloys Along the Tetragonal Deformation Path. IEEE TRANSACTIONS ON MAGNETICS, 2017, vol. 53, no. 11, p. 1700306-1 (1700306-6 p.)ISSN: 1941-0069.
Detail

BULEJKO, P.; DOHNAL, M.; POSPÍŠIL, J.; SVĚRÁK, T. Air purification performance of polypropylene hollow-fibre membranes in submicron particle removal. In Proceedings of 18th Annual Conference of the Czech Aerosol Society. Praha: Česká aerosolová společnost, 2017. p. 88-91. ISBN: 978-80-270-2862-7.
Detail

LÖFFELMANN, F. Failure Index Based Topology Optimization for Multiple Properties. konference Engineering Mechanics 2017, Svratka, ČR: 2017.
Detail

BŘEZINA, M.; MINDA, J.; DOLEŽAL, P.; KRYSTÝNOVÁ, M.; FINTOVÁ, S.; ZAPLETAL, J.; WASSERBAUER, J.; PTÁČEK, P. Characterization of Powder Metallurgy Processed Pure Magnesium Materials for Biomedical Applications. Metals, 2017, vol. 7, no. 7, p. 1-22. ISSN: 2075-4701.
Detail

MAŠEK, J.; BROŽEK, P.; HORÁK, M. Thermo-vacuum test chamber development for heat switch testing in simulated Martian conditions. In Engineering Mechanics 2017. Engineering Mechanics .... 1. Engineering Mechanics 2017, Svratka, ČR: Brno University of Technology, 2017. p. 622-625. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
Detail

MAŠEK, J.; BROŽEK, P.; HORÁK, M. Thermo-vacuum test chamber development for heat switch testing in simulated Martian conditions. Engineering Mechanics 2017, Svratka, ČR: 2017. p. 622-625.
Detail

MÁŠA, V.; STEHLÍK, P. Efektivní cesta k úsporám energie v průmyslových podnicích i komunální sféře. Sborník konference CHISA 2017. Praha: Česká společnost chemického inženýrství, 2017. s. 39-39.
Detail

MÁŠA, V. Komplexní přístup k řešení energetické efektivity objektů a procesů v průmyslové a komunální sféře. Brno: Vysoké učení technické v Brně, 2017. s. 1-95.
Detail

ŠOMPLÁK, R.; NEVRLÝ, V.; SMEJKALOVÁ, V.; SZÁSZIOVÁ, L. Odhad způsobu nakládání se spalitelnými odpady a jejich toků v ČR v roce 2015. Sborník konference CHISA 2017. Praha: Česká společnost chemického inženýrství, 2017. s. 60-60.
Detail

NAĎ, M., LÉTAL, T.; BUZÍK, J.; LOŠÁK, P.;. Influence of Steam-Side Oxid Scales on Creep Life of Boiler Superheater Tube. Ljubljana: Institute of Metals and Technology, Ljubljana, Slovenia, 2017. p. 135-135. ISBN: 978-961-94088-1-0.
Detail

KUČERA, P.; PÍŠTĚK, V. Truck vibrations caused by rotating shaft deflection. Journal of Vibroengineering, 2017, vol. 19, no. 7, p. 5361-5373. ISSN: 1392-8716.
Detail

Jebáček, I.; Matějů, J. Aerobatic Special In-Flight Tests At Institute Of Aerospace Engineering. In Engineering Mechanics 2017. Engineering Mechanics .... 1. Engineering Mechanics 2017, Svratka, ČR: Brno University of Technology, 2017. p. 42-45. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
Detail

Moravec, R.; Blazek, K.; Yin, H.; Gregurich, N.; Horsky, J. A complex approach for secondary cooling improvements using sophisticated spray nozzle analyses in various arcelormittal USA Casters. In AISTech 2017 Proceedings. 2017. p. 1735-1742. ISBN: 9781935117643.
Detail

SEDLÁK, J.; POLZER, A.; CHLADIL, J.; SLANÝ, M.; JAROŠ, A. Reverse Engineering Method Used for Inspection of Stirrer´s Gearbox Cabinet Prototype. MM Science Journal, 2017, vol. 2017, no. 4, p. 1877-1882. ISSN: 1803-1269.
Detail

JUŘENA, T.; DOHNAL, M.; HÁJEK, J. Simulation of Multiphase Flow in Stirred Tank of Nonstandard Design. In Chemical Engineering Transactions. Chemical Engineering Transactions. Milan, Italy: Aidic Servizi, S.r.l., 2017. p. 625-630. ISBN: 978-88-95608-51-8. ISSN: 2283-9216.
Detail

ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Application of Coupled Ductile Fracture Criterion to Plane Strain Plates. In Engineering and Innovative Materials VI. Defect and Diffusion Forum. 2018. p. 186-190. ISBN: 978-3-0357-1209-4. ISSN: 1012-0386.
Detail

RUDOLFOVÁ, Z.; HODEROVÁ, J. A numerical characterization of nanoparticle distribution on surface of a semiconductor. Mendel Journal series, 2017, vol. 23, no. 1, p. 125-132. ISSN: 1803-3814.
Detail

ZAREMBA, M. EXPERIMENTÁLNÍ ANALÝZA PROCESU ROZPADU KAPALINY U ŠUMIVÉ TRYSKY. Brno: 2017.
Detail

NEČAS, D.; VRBKA, M.; GALLO, J.; KŘUPKA, I.; HARTL, M. Observation of lubrication mechanisms within artificial hip joints. Sixth World Tribology Congress (WTC 2017). Peking: Chinese Tribology Institute (CTI), 2017. p. 1-4.
Detail

DOČKAL, K.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Fluid flow measurements of 5P4E by particle tracking velocimetry. In ENGINEERING MECHANICS 2017. Česká republika: Aakdemie věd ČR, Ústav termomechaniky, 2017. p. 274-277. ISBN: 978-80-214-5497-2.
Detail

JECHA, D.; GAL, P.; JÍCHA, J. Použití selektivní nekatalitické redukce (SCNR) na kotli se spalováním černého. In Ochrana ovzdušia - Air protection 2017. Bratislava: Kongras STUDIO, spol. s.r.o., 2017. s. 225-230. ISBN: 978-80-89565-30-6.
Detail

FRANCŮ, J. Reliable solutions of problems with uncertain hysteresis operators. Memoirs Diff. Equat. Math. Phys, 2017, vol. 72, no. 1, p. 45-58. ISSN: 1512-0015.
Detail

FIALA, J.; VLAŠIC, F.; MAZAL, P.; KRATOCHVÍLOVÁ, V. Sledování strukturních změn, vyvolaných cyklickým zatěžováním oceli 15Ch2NMFA, pomocí rentgenové difrakce a měření koercitivní síly. In Defektoskopie 2017 (NDE for Safety). první. Brno: VUT v Brně ve spolupráci s ČNDT, z.s., 2017. s. 63-70. ISBN: 978-80-214-5554-2.
Detail

KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P.; KOUTNÝ, D. FATIGUE PROPERTIES OF ADDITIVELY MANUFACTURED COPPER ALLOY. In Metal 2017 - 26th Internation Conference on Metallurgy and Materials, Conference Proceedings. TANGER LTD., 2018. p. 1593-1598. ISBN: 9788087294796.
Detail

MAHMOUD, H.; VLAŠIC, F.; MAZAL, P. Application of Acoustic Emission Method to Diagnose Damage in Pneumatic Cylinders. In First World Congress on Condition Monitoring. 1st. UK, Northampton: BINDT, 2017. p. 858-868. ISBN: 9781510844759.
Detail

LOMTATIDZE, A.; ŠREMR, J. On periodic solutions to second-order Duffing type equations. NONLINEAR ANALYSIS-REAL WORLD APPLICATIONS, 2018, vol. 2018, no. 40, p. 215-242. ISSN: 1468-1218.
Detail

HNÍZDIL, M.; CHABIČOVSKÝ, M., Turoň, R.; Squerzi, M.; Šimeček, P.; Kreisinger, M. Development of the Tube Quenching Prototype Unit in Třinecké Železárny. 2017. p. 38-39.
Detail

BŘEZINA, L. Advanced multi-body modelling in mechatronics education. In Mechatronics 2017 Recent Technological and Scientific Advances. Advances in Intelligent Systems and Computing. Cham: Springer International Publishing AG, 2017. p. 410-416. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
Detail

NOVOTNÝ, P.; DLUGOŠ, J.; PROKOP, A.; ŘEHÁK, K.; RAFFAI, P. Effective computational model for a solution of turbocharger rotor dynamics. Journal of Vibroengineering, 2017, vol. 19, no. 2, p. 724-736. ISSN: 1392-8716.
Detail

NOVOTNÝ, P.; DRÁPAL, L.; PROKOP, A.; ŘEHÁK, K. Modelling the powertrain rubber coupling under dynamic conditions. Journal of Vibroengineering, 2017, vol. 19, no. 5, p. 3710-3719. ISSN: 1392-8716.
Detail

MARTIŠEK, D.; PROCHÁZKOVÁ, J. The Enhancement of 3D Scans Depth Resolution Obtained by Confocal Scanning of Porous Materials. Measurement Science Review, 2017, vol. 17, no. 6, p. 273-281. ISSN: 1335-8871.
Detail

KAVIČKA, F.; ŠTĚTINA, J.; KATOLICKÝ, J.; MAUDER, T.; KLIMEŠ, L. Analogie simulace průběhu tuhnutí ocelových odlitků a odlitků ze speciální keramiky EUCOR. In Sborník přednášek z 54. slévárenských dnů. Brno: Česká slévárenská společnost, z.s., člen ČSVTS Praha, 2017. s. 15-25. ISBN: 978-80-02-02753-9.
Detail

HIMR, D. Zahrnutí Brunoneho modelu nestacionárního tření do přenosových matic. 2017.
Detail

HIMR, D.; HABÁN, V.; KŮREČKA, J.; POCHYLÝ, F. Additional effects of fluid on the piston. In EPJ Web of Conferences. EPJ Web of Conferences. EDP Sciences, 2018. p. 1-5. ISSN: 2100-014X.
Detail

KŮDELA, J.; POPELA, P. Warm-start Cuts for Generalized Benders Decomposition. Kybernetika, 2017, vol. 53, no. 6, p. 1012-1025. ISSN: 0023-5954.
Detail

SMILEK, J.; HADAŠ, Z. Coil Optimization for Linear Electromagnetic Energy Harvesters with Non-uniform Magnetic Field. In Mechatronics 2017. Advances in Intelligent Systems and Computing. Brno: Springer, 2017. p. 735-742. ISBN: 9783319659596. ISSN: 2194-5357.
Detail

SMILEK, J.; JANÁK, L.; RUBEŠ, O.; HADAŠ, Z. Smart Skins for Structural Health Monitoring in Aerospace Applications. In Proceedings of the EASN Association Conference - 7th EASN International Conference. 7th EASN International Conference Proceedings. European Aeronautics Science Network, 2017. p. 59-65. ISSN: 2523-5052.
Detail

HOLUB, M.; VETIŠKA, J.; BRADÁČ, F.; VALA, M. APPLICATION ON-THE-FLY MEASUEREMENT OF CNC MACHINE TOOLS. MM Science Journal, 2017, no. December, p. 2085-2089. ISSN: 1803-1269.
Detail

POKORNÝ, J.; KOPEČKOVÁ, B.; FIŠER, J.; JÍCHA, M. Simulator with integrated HW and SW for prediction of thermal comfort to provide feedback to the climate control system. In Proceedings of the International conference Experimental Fluid Mechanics 2017. EPJ Web of Conferences. 2018. p. 526-532. ISSN: 2100-014X.
Detail

SVĚRÁK, T.; BULEJKO, P.; OSTREZI, J.; KRIŠTOF, O.; KALIVODA, J.; KEJÍK, P.; MAYEROVÁ, K.; ADAMČÍK, M. Separation of gaseous air pollutants using membrane contactors. IOP Conference Series: Earth and Environmental Science, 2017, vol. 92, no. 1, p. 1-5. ISSN: 1755-1315.
Detail

BULEJKO, P.; DOHNAL, M.; POSPÍŠIL, J.; SVĚRÁK, T. Air filtration performance of symmetric polypropylene hollow-fibre membranes for nanoparticle removal. SEPARATION AND PURIFICATION TECHNOLOGY, 2018, vol. 197, no. 1, p. 122-128. ISSN: 1383-5866.
Detail

JANÁK, L.; ANČÍK, Z.; HADAŠ, Z. THERMOELECTRIC GENERATORS FOR AEROSPACE APPLICATIONS: DEVELOPMENT EXPERIENCE AND FUTURE CHALLENGES. In Proceedings of the EASN Association Conference - 7th EASN International Conference. 7th EASN International Conference Proceedings. European Aeronautics Science Network, 2017. p. 898-905. ISSN: 2523-5052.
Detail

MATLÁK, J.; DLOUHÝ, I. Properties of Electron Beam Hardened Layers Made By Different Beam Deflection. In Proceedings of Abstracts "26th National Conference on Heat Treatment". 2017. p. 251-259. ISBN: 978-80-907043-0-5.
Detail

HADRABA, P.; HADAŠ, Z. Dynamic Analysis of Multispindle Lathe. In Mechatronics 2017 Recent Technological and Scientific Advances. Advances in Intelligent Systems and Computing. 1. Brno: Springer International Publishing, 2018. p. 321-329. ISBN: 978-3-319-65959-6. ISSN: 2194-5365.
Detail

OPLUŠTIL, Z. On the solvability of a nonlocal boundary valuproblem for the first order nonlinear functional differential equations. Memoirs Diff. Equat. Math. Phys, 2017, vol. 2017, no. 72, p. 91-101. ISSN: 1512-0015.
Detail

KŠICA, F.; HADAŠ, Z. Position-Dependent Response Simulation of Machine Tool Using State-Space Models. MM Science Journal, 2017, vol. December, no. 1, p. 2120-2127. ISSN: 1803-1269.
Detail

NOVÁK, K.; POLZER, S.; BURŠA, J. Applicability of simplified computational models in prediction of peak wall stress in abdominal aortic aneurysms. Technology and Health Care, Int. Journal of Health Care Engineering, 2018, vol. 26, no. 1, p. 165-173. ISSN: 0928-7329.
Detail

PÍŠTĚK, V. Schwingungsdämpfung in Verbrennungsmotoren. In Der Verbrennungsmotor - ein Antrieb mit Vergangenheit und Zukunft. 1. Wiesbaden: Springer Vieweg, 2017. s. 491-518. ISBN: 978-3-658-19290-7.
Detail

KOTEK, L.; JIRKA, L.; TŮMA, Z. Risk based spare part management for machines in decommissioning. In Safety and Reliability. Theory and Applications. London: CRC Press, 2017. p. 161-169. ISBN: 9781138629370.
Detail

BLECHA, P.; KOTEK, L. Analýza a posouzení rizik pro projekt Zkušebna – testování parních turbín – NoloadTest. Brno: VUT v Brně, 2017.
Detail

BLECHA, P.; BLECHA, R.; BRADÁČ, F.; KOTEK, L. ANALÝZA FMEA SRP/CS OBVODU. Brno: VUT v Brně, 2017.
Detail

CUI, J. P.; YANG, P.; KANETA, M.; KŘUPKA, I. Numerical study on the interaction of transversely oriented ridges in thermal elastohydrodynamic lubrication point contacts using the Eyring shear-thinning model. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2017, vol. 231, no. 1, p. 93-106. ISSN: 1350-6501.
Detail

KANETA, M.; CUI, J. L.; YANG, P. R.; KŘUPKA, I.; HARTL, M. Influence of thermal conductivity of contact bodies on perturbed film caused by a ridge and groove in point EHL contacts. Tribology International, 2017, vol. 100, no. 1, p. 84-98. ISSN: 0301-679X.
Detail

CUI, J. L.; KANETA, M.; YANG, P.; YANG, P. R. The Relation Between Thermal Wedge and Thermal Boundary Conditions for the Load-Carrying Capacity of a Rectangular Pad and a Slider With Parallel Gaps. ASME Transaction, Journal of Tribology, 2016, vol. 138, no. 2, p. 1-6. ISSN: 0742-4787.
Detail

WANG, J.; YANG, P. R.; LUBRECHT, A. A.; KANETA, M. Numerical investigation of thermal EHL in elliptical contact under impact motion. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, vol. 229, no. 9, p. 1125-1131. ISSN: 1350-6501.
Detail

KANETA, M. To god from devil. JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS. Japan: Japanese Society of Tribologists, 2016. s. 3-3. ISSN: 0915-1168.
Detail

ZHANG, J. J.; GUO, F.; KANETA, M.; OMASTA, M. A study of thermal EHL behaviours under orthogonal entrainment and sliding. Mocaxue Xuebao/Tribology, 2015, vol. 35, no. 4, p. 477-484. ISSN: 1004-0595.
Detail

NOVOTNÝ, P.; DLUGOŠ, J. Innovative Model of Radial Fluid Bearing for Simulations of Turbocharger Rotordynamics. In Mechatronics 2017 Recent Technological and Scientific Advances. Advances in Intelligent Systems and Computing. Cham: Springer International Publishing AG, 2017. p. 356-364. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
Detail

ASTROUSKI, I.; BROŽOVÁ, T.; RAUDENSKÝ, M.; REPPICH, M. Wärmeübertrager mit Kunststoffhohlfasern. In Kompakt-Wärmeübertrager. Essen, Germany: PP PU, 2017. s. 62-66. ISBN: 978-3-934736-39-9.
Detail

RAUDENSKÝ, M.; BROŽOVÁ, T.; BARTULI, E. Flexible heat exchangers with polymeric hollow fibres. In Scientific Tracks and Abstracts. Journal of Applied Mechanical Engineering. Paris, Francie: 2017. p. 31-31. ISSN: 2168-9873.
Detail

HOLUB, M.; JANKOVÝCH, R.; ANDRŠ, O.; KOLÍBAL, Z. Capability Assessment of CNC Machining Centres as Measuring Devices. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2018, vol. 2018, no. 118, p. 52-60. ISSN: 0263-2241.
Detail

MALÝ, M.; SAPÍK, M.; JEDELSKÝ, J.; JANÁČKOVÁ, L.; JÍCHA, M.; SLÁMA, J.; WIGLEY, G. Internal flow characteristics in scaled pressure-swirl atomizer. EPJ Web of Conferences, 2018, vol. 180, no. 02059, p. 1-6. ISSN: 2100-014X.
Detail

CHARVÁT, P.; KLIMEŠ, L.; OSTRÝ, M. Thermally activated wall system with latent heat thermal energy storage – comparison of 1D and 3D model. In Building Simulation 2017. San Francisco, USA: 2017. p. 46-51. ISBN: 9781775052005.
Detail

HRDINA, J.; MATOUŠEK, R.; NÁVRAT, A.; VAŠÍK, P. Nilpotent approximation of a trident snake robot controlling distribution. Kybernetika, 2017, vol. 53, no. 6, p. 1118-1130. ISSN: 0023-5954.
Detail

MACH, M.; ONDRŮŠEK, Č. Motor pro hybridní čerpací systém. Elektrorevue - Internetový časopis (http://www.elektrorevue.cz), 2017, roč. 19, č. 6, s. 173-180. ISSN: 1213-1539.
Detail

MAUDER, T.; CHARVÁT, P.; KLIMEŠ, L.; ŠTĚTINA, J. ROBUSTNESS ANALYSIS OF VARIOUS APPROACHES TO MODELING OF THE PHASE CHANGE FRONT PROPAGATION. In Proceedings of the International Mechanical Engineering Congress & Exposition. Tampa, Florida, USA: The American Society of Mechanical Engineers, 2017. p. 1-9. ISBN: 978-0-7918-5843-1.
Detail

POSPÍŠIL, J.; JÍCHA, M. NUMERICAL MODELLING OF TRANSIENT POLLUTANT DISPERSION IN URBAN STREET INTERSECTION WITH DETAIL INCLUSION OF TRAFFIC DYNAMICS. Bologna: HARMO.org, 2017.
Detail

MATĚJKOVÁ, M.; ČÍŽEK, J.; MUŠÁLEK, R.; DLOUHÝ, I. PROPERTIES OF HYDROXYAPATITE SURFACE DEPOSITED BY PLASMA SPRAY TECHNOLOGIES. In Conference Proceedings 26th International Conference on Metallurgy and Materials. 1st Edition. Ostrava: TANGER Ltd. Ostrava, 2017. p. 1377-1381. ISBN: 978-80-87294-79-6.
Detail

VONDRA, M. Thickening of Liquid Digestate: Integration of Vacuum Evaporator into a Biogas Plant. 2017 AIChe Annual Meeting proceedings. 2017. ISBN: 978-0-8169-1102-8.
Detail

DRÁPAL, L.; NOVOTNÝ, P. Torsional vibration analysis of crank train with low friction losses. Journal of Vibroengineering, 2017, vol. 19, no. 8, p. 5691-5701. ISSN: 1392-8716.
Detail

HAVLÍK, P.; ČUPERA, J.; DLOUHÝ, I. Influence of the process parameters of electron beam to the weldability of aluminum and titanium alloys. In METAL 2017 26th International Conference on Metallurgy and Materials - CONFERENCE PROCEEDINGS. 1. Keltickova 62, 710 00 Ostrava, Czech Republic, EU: TANGER Ltd., 2018. p. 1543-1548. ISBN: 978-80-87294-79-6.
Detail

KOŠŤÁL, D.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Artificial Surface Roughness Deformation in the Starved EHL Contacts. Tribology Online, 2018, vol. 13, no. 1, p. 1-7. ISSN: 1881-2198.
Detail

DE ALMEIDA GOUVÊA, L.; ČÍŽEK, J.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. MICROSTRUCTURE AND PROPERTIES OF MULTI-ELEMENTARY POWDERS OBTAINED BY COLD SPRAY DEPOSITION. In METAL 2017. 1st edition, 2018. Brno: Tanger Ltd., 2017. p. 1275-1280. ISBN: 978-80-87294-79-6.
Detail

BALÁŠ, M.; LISÝ, M.; MILČÁK, P.; POSPÍŠIL, J. Influence of steam temperature on biomass gasification process. Waste forum, 2018, no. 5, p. 372-378. ISSN: 1804-0195.
Detail

RUDIANTO, H.; DLOUHÝ, I.; ŠOUKAL, F. Effect of Ultrasonication Dispersion Technique on Sintering Properties of CNT Reinforced Al-Zn-Mg-Cu Powder. ARCHIVES OF METALLURGY AND MATERIALS, 2017, vol. 62, no. 2, p. 1131-1135. ISSN: 1733-3490.
Detail

DVOŘÁK, K.; DOLÁK, D.; PALOUŠEK, D.; ČELKO, L.; JECH, D. The Effect of the Wear of Rotor Pins on Grinding Efficiency in a High-speed Disintegrator. Materials Science, 2018, vol. 24, no. 1, p. 29-34. ISSN: 1392-1320.
Detail

ŠTĚPÁNEK, R.; PANTĚLEJEV, L.; MAN, O.; GUAGLIANO, M.; VEDANI, M.; MOSTAED, E. Microstructural changes of ECAP-processed magnesium alloy AZ91 during cyclic loading at different stress-amplitude levels. Materiali in tehnologije, 2018, vol. 52, no. 1, p. 9-13. ISSN: 1580-2949.
Detail

M. KANDEVA, V. BALABANOV, E. ZADOROZHNAYA, ZH. KALITCHIN, P. SVOBODA, I. LEVANOV. Environmental Protection by Self-organisation of Tribosystems with Self-lubricating Materials in Dry Friction. Part II: Iinvestigations at Different Dry Sliding Rates. J ENVIRON PROT ECOL, 2017, vol. 18, no. 4, p. 1581-1592. ISSN: 1311-5065.
Detail

ZAPLETAL, J.; DOLEŽAL, P. Elastic and Plastic Behavior of the QE22 Magnesium Alloy Reinforced with Short Saffil Fibers and SiC Particles. Metals, 2018, vol. 8(2), no. 133, p. 1-13. ISSN: 2075-4701.
Detail

NEČAS, D.; JAROŠ, T.; DOČKAL, K.; ŠPERKA, P.; VRBKA, M.; KŘUPKA, I.; HARTL, M. The effect of kinematic conditions on film thickness in compliant lubricated contact. ASME Transaction, Journal of Tribology, 2018, vol. 140, no. 5, p. 1-8. ISSN: 0742-4787.
Detail

LOMTATIDZE, A. On periodic bounded and unbounded solutions of second order nonlinear ordinary differential equations. Georgian Mathematical Journal, 2017, vol. 2017, no. 24, p. 241-263. ISSN: 1072-947X.
Detail

LOMTATIDZE, A.; DOSOUDILOVÁ, M. Remark on periodic boundary-value problem for second-order linear ordinary differential equations. Electronic Journal of Differential Equations, 2018, vol. 2018, no. 13, p. 1-7. ISSN: 1072-6691.
Detail

BUZÍK, J.; LÉTAL, T.; NAĎ, M.; LOŠÁK, P.; PERNICA, M. Srovnání přístupů pro stanovení akustické rezonance. In Sborník konference Kotle a energetická zařízení 2018. Kotle a energetická zařízení. Brno: Moravská energetická, a.s., 2018. s. 111-123. ISSN: 1804-6673.
Detail

KLAPKA, M.; MAZŮREK, I.; KUBÍK, M.; MACHÁČEK, O. Reinvention of the EUSAMA diagnostic methodology. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2017, vol. 4, no. 74, p. 304-318. ISSN: 0143-3369.
Detail

BULEJKO, P.; DOHNAL, M.; POSPÍŠIL, J.; KRIŠTOF, O.; SVĚRÁK, T.; KEJÍK, P. Air filtration using hollow-fibre membranes for nanoparticle removal. In FILTECH 2018, March 13-15, Cologne – Germany. 2018. p. 1-12. ISBN: 978-3-941655-15-7.
Detail

PALOUŠEK, D.; KOČICA, M.; PANTĚLEJEV, L.; KLAKURKOVÁ, L.; ČELKO, L.; KOUTNÝ, D.; KAISER, J. SLM process parameters development of Cu-alloy Cu7.2Ni1.8Si1Cr. RAPID PROTOTYPING JOURNAL, 2019, vol. 25, no. 2, p. 266-276. ISSN: 1355-2546.
Detail

HIMR, D.; HABÁN, V. Výpočet vysokofrekvenčních tlakových pulsací pro elektrárnu Slapy. 2018.
Detail

BARTULI, E.; RAUDENSKÝ, M. Numerical Investigation of Heat Transfer on the Outer Surface of Polymeric Hollow Fibers. 24th INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. p. 37-37. ISBN: 978-961-94088-0-3.
Detail

BRUMMER, V.; HOUDKOVÁ, L.; KALINA, M.; JECHA, D. Koagulace a flokulace odpadní vody ze zpracování brambor. In TVIP 2018. Hustopeče: CEMC, 2018. s. 140-1 (140-7 s.)ISBN: 978-80-85990-12-6.
Detail

PETRUŠKA, J. Jak se za posledních 50 let změnila výuka mechaniky. Bulletin České společnosti pro mechaniku, 2018, roč. 2017, č. 3, s. 7-23. ISSN: 1211-2046.
Detail

MATLÁK, J.; DLOUHÝ, I. Properties of electron beam hardened layers made by different beam deflection. Manufacturing TECHNOLOGY, 2018, vol. 18, no. 2, p. 279-284. ISSN: 1213-2489.
Detail

POCHYLÝ, F.; RUDOLF, P. Vírová turbína: řešení pro malé elektrárny. MM Průmyslové spektrum, 2018, roč. 2018, č. 3, s. 98-98. ISSN: 1212-2572.
Detail

TRČKA, T.; POLZER, A.; SEDLÁK, J. End Mills with PCD Inserts Sharpened by Different Electrical Technologies. MM Science Journal, 2018, no. 1, p. 2192-2197. ISSN: 1805-0476.
Detail

VENCL, A., BOBIC, I., BOBIC, B., JAKIMOVSKA, K., SVOBODA, P., KANDEVA, M. Erosive wear properties of ZA-27 alloy-based nanocomposites: Influence of type, amount and size of nanoparticle reinforcements. Friction, 2019, vol. 7, no. 4, p. 340-350. ISSN: 2223-7690.
Detail

KOK, M., TOBIN, E. F., ZIKMUND, P., RAPS, D., YOUNG, T. Laboratory Investigation into Anti-contamination Coatings for Mitigating Insect Contamination with Application to Laminar Flow Technologies. In Contamination Mitigating Polymeric Coatings for Extreme Environments. Advances in Polymer Science. Springer International Publishing, 2019. p. 291-314. ISBN: 978-3-030-45839-3.
Detail

PROCHÁZKOVÁ, J.; MARTIŠEK, D. Notes on iterative closest algorithm. In 17th Conference on Applied Mathematics Aplimat 2018 Proceedings. Bratislava, Slovak Republic: Institute of Mathematics and Physics, Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava, 2018. p. 876-884. ISBN: 978-80-227-4765-3.
Detail

PÍŠKA, M. Technologické zkoušky obráběcích a tvářecích olejů. In Mazání v moderním průmyslovém podniku. 1. Praha: Česká strojnická společnost z.s., 2018. s. 47-55. ISBN: 978-80-02-02785-0.
Detail

NAĎ, M.; JEGLA, Z.; LÉTAL, T.; LOŠÁK, P.; BUZÍK, J. Thermal load non-uniformity estimation for superheater tube bundle damage evaluation. In E D P SCIENCES. MATEC Web of Conferences. EDP Sciences, 2018. p. 1-10. ISSN: 2261-236X.
Detail

NAĎ, M., LÉTAL, T.; BUZÍK, J.; LOŠÁK, P.;. Influence of Steam-Side Oxid Scales on Creep Life of Boiler Superheater Tube. Materiali in tehnologije, 2018, vol. 52, no. 1, p. 43-46. ISSN: 1580-2949.
Detail

BROŽOVÁ, T.; RAUDENSKÝ, M.; ASTROUSKI, I. FLEXIBLE POLYMERIC HOLLOW FIBER HEAT EXCHANGERS. In Proceedings of 2nd International Conference on Design and Production Engineering & 2nd International Conference on Mechatronics, Automation and Smart Materials. 2018. p. 1373-1382. ISBN: 978-1-56700-430-4.
Detail

BROŽOVÁ, T.; RAUDENSKÝ, M. Determination of surface wettability of polymeric hollow fibres. JOURNAL OF ELASTOMERS AND PLASTICS, 2018, vol. 50, no. 8, p. 737-746. ISSN: 0095-2443.
Detail

ZELENÝ, M.; STRAKA, L.; SOZINOV, A.; HECZKO, O. Transformation Paths from Cubic to Low-Symmetry Structures in Heusler Ni2MnGa Compound. Scientific Reports, 2018, vol. 8, no. 1, p. 1-8. ISSN: 2045-2322.
Detail

VAVERKA, J.; BURŠA, J.; ŠUMBERA, J.; PÁSEK, M. Effect of Transmural Differences in Excitation-Contraction Delay and Contraction Velocity on Left Ventricle Isovolumic Contraction: A Simulation Study. BioMed Research International, 2018, vol. 2018, no. 2018, p. 1-10. ISSN: 2314-6141.
Detail

MARTIŠEK, D. Elimination of Gibbs and Nyquist–Shannon Phenomena in 3D Image Reconstruction. 3D Research, 2016, vol. 1, no. 1, p. 1-21. ISSN: 2092-6731.
Detail

MARTIŠEK, D. 3D Reconstruction of the Surface using a Standard Camera. Mathematical Problems in Engineering, 2017, vol. 2017, no. 1, p. 1-11. ISSN: 1563-5147.
Detail

MARTIŠEK, D. Fast Shape-From-Focus method for 3D object reconstruction. OPTIK, 2018, vol. 2018, no. 169, p. 16-26. ISSN: 0030-4026.
Detail

MORAVČÍK, I.; DE ALMEIDA GOUVÊA, L.; ČUPERA, J.; DLOUHÝ, I. Preparation and properties of medium entropy CoCrNi/boride metal matrix composite. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, vol. 748, no. 748, p. 979-988. ISSN: 1873-4669.
Detail

MARTIŠEK, D. Joint Rock Coefficient Estimation Based on Hausdorff Dimension. Advances in Pure Mathematics, 2017, vol. 7, no. 11, p. 615-640. ISSN: 2160-0368.
Detail

MARTIŠEK, D.; DRUCKMÜLLEROVÁ, H. Registration of Partially Focused Images for 2D and 3D Reconstruction of Oversized Samples. SCANNING, 2017, vol. 2017, no. 4, p. 1-8. ISSN: 1932-8745.
Detail

KUČERA, P.; PÍŠTĚK, V. HIL TESTOVÁNÍ MECHTRONICKÉHO SYSTÉMU V LABORATORNÍCH PODMÍNKÁCH. Perners' Contacts, 2018, roč. XIII, č. 1, s. 83-89. ISSN: 1801-674X.
Detail

VAVERKA, O.; KOUTNÝ, D.; VRÁNA, R.; PANTĚLEJEV, L.; PALOUŠEK, D. Effect of heat treatment on mechanical properties and residual stresses in additively manufactured parts. In ENGINEERING MECHANICS 2018. Engineering Mechanics .... Praha: Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, 2018. p. 897-900. ISBN: 978-80-86246-88-8. ISSN: 1805-8256.
Detail

BROŽOVÁ, T.; BARTULI, E.; RAUDENSKÝ, M. Condensation on the Outer Surface of Polymer Hollow Fiber Heat Exchangers and its Influence to the Heat Transfer. In Engineering Mechanics 2018. Praha: ITAM CAS, 2018. p. 117-120. ISBN: 978-80-86246-88-8.
Detail

BARTULI, E.; BROŽOVÁ, T.; RAUDENSKÝ, M. The Influence of Hollow Fibers Orientation Inside the Polymeric Hollow Fiber Heat Exchanger on the Heat Transfer Intensity. In Engineering Mechanics 2018. Praha: ITAM CAS, 2018. p. 61-64. ISBN: 978-80-86246-88-8.
Detail

BARTULI, E.; GUZEJ, M.; KOMÍNEK, J.; HORSKÝ, J. Experimental Investigation of a Heat Transfer Coefficient for Aluminum Alloys. In Heat Pipes, Heat Pumps, Refrigerators, Power Sources. Minsk: A.V. Lykau Institute of Heat and Mass Transfer of the National Academy of Sciences of Belarus, 2015. p. 56-62. ISBN: 978-985-6456-99-5.
Detail

VOTAVOVÁ, H.; POHANKA, M. THE COOLING PROCESS IN SPRAY OVERLAP DURING HYDRAULIC DESCALING. In Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018. p. 1-6. ISBN: 978-80-87294-83-3.
Detail

POLÁČIK, J.; POSPÍŠIL, J.; ŠNAJDÁREK, L.; SITEK, T. Influence of temperature on the production and size distribution of fine particles released from beech wood samples. In XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018). MATEC Web of Conferences. 168. 2018. p. 1-9. ISSN: 2261-236X.
Detail

ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Standard tensile test compared to the small punch test of aluminium alloy. In Engineering Mechanics 2018. 2018. p. 745-748. ISBN: 978-80-86246-88-8.
Detail

CHABIČOVSKÝ, M.; RESL, O.; RAUDENSKÝ, M. IMPACT OF OXIDE LAYER ON SPRAY COOLING INTENSITY AND HOMOGENEITY DURING CONTINUOUS CASTING OF THE STEEL. In Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018. p. 1-6. ISBN: 978-80-87294-83-3.
Detail

KOMÍNEK, J.; LUKS, T.; POHANKA, M.; RAUDENSKÝ, M.; HWANG, J-Y. SECONDARY COOLING OVERLAPPED WITH BEARING HOUSING IN A CONTINUOUS CASTER. In Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018. p. 1-6. ISBN: 978-80-87294-83-3.
Detail

LEE,T.W.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Approximate Solution to the Spray Heat Transfer Problem at High Surface Temperatures and Liquid Mass Fluxes. HEAT TRANSFER ENGINEERING, 2018, vol. 0, no. 0, p. 1-7. ISSN: 1521-0537.
Detail

VACULKA, M.; NOHÁL, L.; VOSYNEK, P. Case study of multiaxial criteria for rolling contact fatigue of bearing steels. In MATEC Web of Conferences. MATEC Web of Conferences. EDP Sciences, 2018. p. 1-7. ISSN: 2261-236X.
Detail

KRATOCHVÍL, J. The Overview of Nowadays Approaches on the Automatic Roof Plane Detection and Analysis for Photovoltaic Deployment. PEFnet 2015. Brno: Mendelova univerzita, 2015. p. 35-35. ISBN: 978-80-7509-362-2.
Detail

KRAJŇÁKOVÁ, P.; DE ALMEIDA GOUVÊA, L.; ČUPERA, J.; JAN, V.; DLOUHÝ, I.; SPOTZ, Z. Influence of multiple electron-beam remeltings on the characteristics of HVOF and CGDS sprayed conicraly coatings. Materiali in tehnologije, 2018, vol. 52, no. 3, p. 289-293. ISSN: 1580-2949.
Detail

FOJTÁŠEK, J. Heavy Commercial Vehicle Yaw Control Simulation. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas: JVE International Ltd., 2018. p. 138-143. ISSN: 2345-0533.
Detail

LÍZAL, F.; PECH, O.; JEDELSKÝ, J.; TUHOVČÁK, J.; JÍCHA, M. The automotive ventilation test case: Investigation of the velocity field downstream of a benchmark vent using smoke visualization and hot-wire anemometry. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2019, vol. 233, no. 8, p. 2146-2160. ISSN: 0954-4070.
Detail

BULEJKO, P. Numerical Comparison of Prediction Models for Aerosol Filtration Efficiency Applied on a Hollow-Fiber Membrane Pore Structure. Nanomaterials, 2018, vol. 8, no. 6, p. 1-24. ISSN: 2079-4991.
Detail

PEČ, M.; ZAPLETAL, J.; ŠEBEK, F.; PETRUŠKA, J. Low-Cycle Fatigue, Fractography and Life Assessment of EN AW 2024-T351 under Various Loadings. EXPERIMENTAL TECHNIQUES, 2019, vol. 43, no. 1, p. 41-56. ISSN: 0732-8818.
Detail

HRDINA, J.; VAŠÍK, P.; MATOUŠEK, R.; NÁVRAT, A. Geometric algebras for uniform colour spaces. Mathematical Methods in the Applied Sciences, 2018, vol. 41, no. 11, p. 4117-4130. ISSN: 1099-1476.
Detail

HRDINA, J.; NÁVRAT, A.; VAŠÍK, P.; MATOUŠEK, R. Fisheye correction by CGA non-linear transformation. Mathematical Methods in the Applied Sciences, 2018, vol. 41, no. 11, p. 4106-4116. ISSN: 1099-1476.
Detail

MÁŠA, V.; STEHLÍK, P.; TOUŠ, M.; VONDRA, M. Key pillars of successful energy saving projects in small and medium industrial enterprises. Energy, 2018, no. 158, p. 293-304. ISSN: 0360-5442.
Detail

LOŠÁK, P.; LÉTAL, T.; BUZÍK, J.; NAĎ, M. Leakage cause analysis of a flange joint designed according to standards. Materiali in tehnologije, 2018, vol. 52, no. 3, p. 295-298. ISSN: 1580-2949.
Detail

RAUDENSKÝ, M.; CHABIČOVSKÝ, M.; TUROŇ, R. Development and plant verification of tube quenching unit. In The 7th International Congress on Science and Technology of Steelmaking. Milano: Associazione Italiana di metallurgia, 2018. p. 1-8. ISBN: 978-88-98990-14-6.
Detail

PANTĚLEJEV, L.; ŠTĚPÁNEK, R.; KOUTNÝ, D.; PALOUŠEK, D. Mechanical properties of AlSi10Mg alloy processed by SLM. Materials Engineering - Materiálové inžinierstvo (online version), 2018, vol. 24, no. 4, p. 108-114. ISSN: 1338-6174.
Detail

HAVLÍK, P.; ČUPERA, J.; KOUŘIL, J.; DLOUHÝ, I.; FORET, R. Optimization of EB keyhole welding of aluminum to titanium alloy. In Elektrotechnica & Elektronica. Elektrotechnica & Elektronica. 108 "Rakovski" str., Sofia 1000, Bulgaria: The Union of Electronics, Electrical Engineering and Telecommunications /CEEC/, Bulgaria, 2018. p. 125-131. ISSN: 0861-4717.
Detail

BŘEZINA, M.; MAUDER, T.; ŠTĚTINA, J.; KLIMEŠ, L. Dry cooling simulation of continuous casting of austenitic steel slabs. In 27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018). KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC: TANGER LTD, 2018. p. 107-113. ISBN: 978-80-87294-84-0.
Detail

BŘEZINA, M.; KLIMEŠ, L.; ŠTĚTINA, J. Optimization of material properties of phase change materials for latent heat thermal energy storage. In Sborník příspěvků Mendel 2018. Mendel Journal series. 2018. p. 47-54. ISSN: 1803-3814.
Detail

SMILEK, J.; HADAŠ, Z.; VETIŠKA, J.; BEEBY, S. Rolling mass energy harvester for very low frequency of input vibrations. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2019, no. 125, p. 215-228. ISSN: 0888-3270.
Detail

WEISS, K.; ASTROUSKI, I.; RAUDENSKÝ, M.; REPPICH, M. Polymeric Hollow‐Fiber Bundles as Immersed Heat Exchangers. Chemical Engineering and Technology, 2018, vol. 41, no. 7, p. 1457-1465. ISSN: 1521-4125.
Detail

ŠTĚTINA, J.; KAVIČKA, F.; KATOLICKÝ, J.; MAUDER, T.; KLIMEŠ, L. Importance of the experimental investigation of a concasting technology. In THE APPLICATION OF EXPERIMENTAL AND NUMERICAL METHODS IN FLUID MECHANICS AND ENERGY 2018. MATEC Web of Conferences. 2018. p. 1-6. ISSN: 2261-236X.
Detail

KAVIČKA, F.; ŠTĚTINA, J.; KATOLICKÝ, J.; MAUDER, T.; KLIMEŠ, L. The model of temperature field of ductile-cast-iron roller. In 37. stretnutie katedier Mechaniky tekutín a Termomechaniky - Zborník príspevkov. 2018. p. 59-66. ISBN: 978-80-228-3061-4.
Detail

BROŽOVÁ, T.; BARTULI, E. Influence of Condensation on the Outer Surface of Polymer Hollow Fiber Heat Exchangers during Heat Transfer. In ASME 2018 16th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2018. p. 1-6. ISBN: 978-0-7918-5119-7.
Detail

BARTULI, E.; RAUDENSKÝ, M. Polymeric Hollow Fibers Heat Exchanger with a Cross-winding Structure. 2018.
Detail

HRABEC, P.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; MACHOVÁ, A. Statistical Analysis of the Width of Kerf Affecting the Manufacture of Minimal Inner Radius. In Recent Advances in Soft Computing. Springer Science and Business Media Deutschland GmbH, 2018. p. 1-12. ISBN: 978-3-319-58088-3.
Detail

ŘEHOŘEK, L.; DLOUHÝ, I.; JAN, V. Cold gas dynamic spray deposition as additive manufacturing of architectured materials. Materiálové inžinierstvo, 2018, vol. 24, no. 4, p. 115-123. ISSN: 1335-0803.
Detail

MATĚJKOVÁ, M.; DLOUHÝ, I. Production of hydroxyapatite-titanium composite powders by high-energy ball milling suitable for spark plasma sintering processes. Materiálové inžinierstvo, 2018, no. 12-2017, p. 94-100. ISSN: 1335-0803.
Detail

MÁŠA, V.; TOUŠ, M.; KONEČNÁ, E.; STEHLÍK, P. Systematic and Integrated Approach in Hazardous Medical Waste Treatment. 2018.
Detail

KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Notched specimen under compression for ductile failure criteria. Mechanics of Materials, 2018, vol. 125, no. 1, p. 94-109. ISSN: 0167-6636.
Detail

HADAŠ, Z.; JANÁK, L.; SMILEK, J. Virtual prototypes of energy harvesting systems for industrial applications. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, vol. 110, no. 1, p. 152-164. ISSN: 0888-3270.
Detail

BOBÁK, P.; TOUŠ, M.; KONEČNÁ, E.; MÁŠA, V. Reduction of Energy Cost in Commercial Laundries by Applying Warm Rinsing Bath. 2018.
Detail

BRUMMER, V.; ZEJDA, V.; HOUDKOVÁ, L. Recovery of phosphorus from wastewater using ion exchange resins. ecoSTP18 Conference, Ecotechnologies for Wastewater Treatment. 2018. London, Ontario, Kanada: IWA, 2018.
Detail

HIMR, D.; HABÁN, V. Posouzení kapacity generátoru páry. 2018.
Detail

MATLÁK, J.; DLOUHÝ, I. Surface property control by electron beam deflection during hardening. Materiálové inžinierstvo, 2018, vol. 24, no. 4, p. 124-130. ISSN: 1335-0803.
Detail

VÁLKA, L.; DLOUHÝ, I. Fracture toughness transition of ferritic-pearlitic steel at static and dynamic loading evaluated by master curve concept. Materiálové inžinierstvo, 2018, vol. 24, no. 4, p. 101-107. ISSN: 1335-0803.
Detail

BUZÍK, J.; LÉTAL, T.; LOŠÁK, P.; NAĎ, M.; PERNICA, M. Srovnání přístupů pro stanovení akustické rezonance. All for Power, 2018, roč. 12, č. 2, s. 89-92. ISSN: 1802-8535.
Detail

KŮDELA, J.; ŠOMPLÁK, R.; NEVRLÝ, V.; LIPOVSKÝ, T. Robust Waste Transfer Station Planning by Stochastic Programming. Chemical Engineering Transactions, 2018, vol. 70, no. 1, p. 889-894. ISSN: 2283-9216.
Detail

MORAVČÍK, I.; DE ALMEIDA GOUVÊA, L.; HORNÍK, V.; KOVACOVA, Z.; KITZMANTEL, E.; NEUBAUER, E.; DLOUHÝ, I. Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy. SCRIPTA MATERIALIA, 2018, vol. 157, no. 1, p. 24-29. ISSN: 1359-6462.
Detail

MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; HRABEC, P.; PROKEŠ, T.; MATOUŠEK, R.; FIALA, Z. Quality of Surface and Subsurface Layers after WEDM Aluminum Alloy 7475-T7351 Including Analysis of TEM Lamella. International Journal of Advanced Manufacturing Technology, 2018, vol. 99, no. 9, p. 2309-2326. ISSN: 1433-3015.
Detail

NAVRÁTIL, J.; JIRÁSEK, A.; HAMLINGTON, P.; LOFTHOUSE, A. Effect of angle of attack, gas composition and reynolds number on flutter boundary of benchmark super-critical wing. In 17th International Forum on Aeroelasticity and Structural Dynamics, IFASD 2017. Elsevier B.V., 2018. p. 1-10. ISBN: 9788897576280.
Detail

DOLEŽAL, P.;FOJT, L. ;MINDA, J. Methodology for In Situ Microstructural Characterisation of AZ31 Magnesium Alloy Corrosion Degradation in Hanks' Solution. Materials Science Forum, 2017, vol. 2017/3, no. 891, p. 298-302. ISSN: 1662-9752.
Detail

ŠTARHA, P.; PROCHÁZKOVÁ, J.; MARTIŠEK, D. The reconstruction of the object surface using confocal microscope with hyperchromatic lens. Mendel Journal series, 2018, vol. 24, no. 1, p. 129-134. ISSN: 1803-3814.
Detail

MARTIŠEK, D.; PROCHÁZKOVÁ, J. The Analysis of Rock Surface Asperities. Mendel Journal series, 2018, vol. 24, no. 1, p. 135-142. ISSN: 1803-3814.
Detail

STRAKA, L.; VEŘTÁT, P.; DRAHOKOUPIL, J.; ZELENÝ, M.; KOPEČEK, J.; SOZINOV, A.; HECZKO, O. Low temperature a/b nanotwins in Ni50Mn25+xGa25−x Heusler alloys. Scientific Reports, 2018, vol. 8, no. 1, p. 11943 (- p.)ISSN: 2045-2322.
Detail

VALDAUF J.; NIEMCZYK K.; GALAS, R. Maziva pro železnici, stále je co vyvíjet. In Mazání v moderním průmyslovém podniku. Praha: Česká strojnická společnost z.s., 2018. s. 61-65. ISBN: 978-80-02-02785-0.
Detail

VENCL, A.; BOBIC, B.; VUCETIC, F.; SVOBODA, P.; POPOVIC, V.; BOBIC, I. Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy. J BRAZ SOC MECH SCI, 2018, vol. 40, no. 11, p. 1-13. ISSN: 1678-5878.
Detail

ZAPLETAL, T.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. The effect of surface roughness on friction and film thickness in transition from EHL to mixed lubrication. TRIBOLOGY INTERNATIONAL, 2018, vol. 128, no. 1, p. 356-364. ISSN: 1879-2464.
Detail

TUREK, V.; KILKOVSKÝ, B.; JEGLA, Z.; STEHLÍK, P. Proposed EU legislation to force changes in sewage sludge disposal – A case study. Frontiers of Chemical Science and Engineering, 2018, vol. 12, no. 4, p. 660-669. ISSN: 2095-0187.
Detail

AZOUMA, Y.; JEGLA, Z.; REPPICH, M.; TUREK, V.; WEIß, M. Using agricultural waste for biogas production as a sustainable energy supply for developing countries. Chemical Engineering Transactions, 2018, vol. 70, no. 1, p. 445-450. ISSN: 2283-9216.
Detail

JEGLA, Z.; FIALOVÁ, D. Development of heat and fluid flow distribution modelling system for analysing multiple-distributed designs of process and power equipment. Chemical Engineering Transactions, 2018, vol. 70, no. 1, p. 1471-1476. ISSN: 2283-9216.
Detail

HANUSOVÁ, P.; DLOUHÝ, I.; JAN, V. MECHANO-CHEMICALLY PREPARED AND SPARK PLASMA SINTERED ALUMINIUM MATRIX COMPOSITE WITH CERAMIC AND INTERMETALLIC REINFORCEMENT. Materials Engineering - Materiálové inžinierstvo (online version), 2018, vol. 24, no. 4, p. 131-141. ISSN: 1338-6174.
Detail

RANUŠA, M.; GALLO, J.; VRBKA, M.; HOBZA, M.; PALOUŠEK, D.; KŘUPKA, I.; HARTL, M. Wear Analysis of Extracted Polyethylene Acetabular Cups Using a 3D Optical Scanner. TRIBOLOGY & LUBRICATION TECHNOLOGY, 2018, vol. 74, no. 6, p. 68-84. ISSN: 1545-858X.
Detail

FIALOVÁ, D.; JEGLA, Z. Modelling of fluid flow and heat distribution in a specific heat exchanger. In ENGINEERING MECHANICS 2018. Engineering Mechanics .... Prague: Czech Academy of Sciences, 2018. p. 209-212. ISBN: 978-80-86246-88-8. ISSN: 1805-8256.
Detail

ZEJDA, V.; BĚLOHRADSKÝ, P.; HOUDKOVÁ, L. Měření čerpacích charakteristik mamutových čerpadel. In TVIP 2018. Hustopeče: CEMC, 2018. s. 143-153. ISBN: 978-80-85990-12-6.
Detail

DRÁPAL, L.; VOPAŘIL, J. Investigation of an Engine Block Load by means of Crank Train Rotating Parts. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. p. 117-122. ISSN: 2345-0533.
Detail

VOPAŘIL, J.; DRÁPAL, L. Computational Modelling and Measurement of Vibration of Power Train Mountings of a Passenger Car. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. p. 144-149. ISSN: 2345-0533.
Detail

RAFFAI, P.; DRÁPAL, L. Computer Simulation of the Piston Ring Pack with Reflect to Lubricant Oil Consumption. Journal of the Balkan Tribological Association, 2018, vol. 24, no. 2, p. 263-277. ISSN: 1310-4772.
Detail

TŮMA, Z.; KOTEK, L.; KROUPA, J.; BLECHA, P.; BRADÁČ, F. Verification of HTC Vive deployment capabilities for ergonomic evaluations in virtual reality environments. In Safety and Reliability – Safe Societies in a Changing World. 1. London: Taylor and Francis group, 2018. p. 309-313. ISBN: 9781351174657.
Detail

Moravec, R.; Blazek, K.; Yin, H.; Gregurich, N.; Horsky, J. A Complex Approach for Secondary Cooling Improvements Using Sophisticated Spray Nozzle Analyses in Various ArcelorMittal USA Casters. Iron and Steel Technology, 2018, vol. 15, no. 9, p. 44-50. ISSN: 1547-0423.
Detail

DOUPOVEC, M.; KUREK, J.; MIKULSKI, W. The natural brackets on couples of vector fields and 1-forms. TURKISH JOURNAL OF MATHEMATICS, 2018, vol. 42, no. 4, p. 1853-1862. ISSN: 1300-0098.
Detail

ŠEBEK, F.; DYMÁČEK, P.; KUBÍK, P.; HŮLKA, J.; PETRUŠKA, J. The role of punch eccentricity in small punch testing. In 6th International Small Sample Test Techniques Conference. Ubiquity Proceedings. 2018. p. 43-46. ISSN: 2631-5602.
Detail

ŠTĚTINA, J.; BŘEZINA, M.; KLIMEŠ, L.; MAUDER, T. Využití makro modelu tuhnutí oceli pracujícího v reálném čase pro předpovídání vzniku trhlin. In Zborník príspevkov Odborná konferencia ŽP VVC 2018. 1. Brezno: ŽP Výskumno-vývojové centrum s.r.o., 2018. s. 35-40. ISBN: 978-80-973141-0-1.
Detail

HRABEC, D.; ŠOMPLÁK, R.; NEVRLÝ, V.; SMEJKALOVÁ, V. Sustainable Model Integration of Waste Production and Treatment Process Based on Assessment of GHG. Chemical Engineering Transactions, 2018, vol. 70, no. 1, p. 1603-1608. ISSN: 2283-9216.
Detail

MICHALEC, M.; SVOBODA, P.; KŘUPKA, I.; HARTL, M. Tribological behaviour of smart fluids influenced by magnetic and electric field – A review. Tribology in Industry, 2018, vol. 40, no. 4, p. 515-528. ISSN: 0354-8996.
Detail

ŠEVEČEK, O.; MAJER, Z.; MARCIÁN, P.; BERTOLLA, L.; KOTOUL, M. Computational Analysis of Crack-Like Defects Influence on the Open Cell Ceramic Foam Tensile Strength. In Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (print). Švýcarsko: Trans Tech Publications, 2018. p. 271-276. ISBN: 9783035713503. ISSN: 1013-9826.
Detail

MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; HRABEC, P.; PROKEŠ, T.; HRDÝ, R. Analysis of cut orientation through half-finished product using WEDM. Materials and Manufacturing Processes, 2018, vol. 33, no. 16, p. 1-11. ISSN: 1532-2475.
Detail

MOURALOVÁ, K.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; MATOUŠEK, R.; HRABEC, P.; FIŠEROVÁ, Z.; OTOUPALÍK, J. Using a Design of Experiment for a Comprehensive Analysis of the Surface Quality and Cutting Speed in WED-Machined Hadfield Steel. Journal of Mechanical Science and Technology, 2019, vol. 33, no. 5, p. 2371-2386. ISSN: 1976-3824.
Detail

BULEJKO, P.; SVĚRÁK, T.; DOHNAL, M.; POSPÍŠIL, J. Aerosol filtration using hollow-fiber membranes: Effect of permeate velocity and dust amount on separation of submicron TiO2 particles. POWDER TECHNOLOGY, 2018, vol. 340, no. 1, p. 344-353. ISSN: 0032-5910.
Detail

KŮREČKA, J.; HABÁN, V.; HIMR, D. Bulk viscosity of water in acoustic modal analysis and experiment. In EPJ Web of Conferences. EPJ Web of Conferences. EDP Sciences, 2018. p. 1-6. ISSN: 2100-014X.
Detail

VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D.; PANTĚLEJEV, L.; JAROŠ, J.; ZIKMUND, T.; KAISER, J. Selective Laser Melting Strategy for Fabrication of Thin Struts Usable in Lattice Structures. Materials, 2018, vol. 11, no. 9, p. 1-20. ISSN: 1996-1944.
Detail

VRÁNA, R.; VOSYNEK, P.; KOUTNÝ, D.; NÁVRAT, T.; PALOUŠEK, D. Evaluation of mechanical behavior of 3D printed lattice structure by SLM: Experiment and FEA. In Experimental Stress Analysis - 56th International Scientific Conference. Czech Society for Mechanics, 2018. p. 443-449. ISBN: 978-80-270-4062-9.
Detail

ŠTĚTINA, J.; BŘEZINA, M.; KLIMEŠ, L. MĚŘENÍ V OCELÁŘSKÉM PROVOZU. In Měření v průmyslu. 1. Brno: Český svaz geodetů a kartografů, 2018. s. 68-75. ISBN: 978-80-02-02826-0.
Detail

BULEJKO, P.; SVĚRÁK, T.; KRIŠTOF, O.; DOHNAL, M.; ONDRÁČEK, J. Aerosol separation efficiency and pressure drop evolution with intense particle loading of hollow-fiber membranes. 23rd International Congress of Chemical and Process Engineering CHISA 2018 Prague. 2018. p. 1 (1 s.).
Detail

BOJANOVSKÝ, J.; BĚLOHRADSKÝ, P.; SKRYJA, P.; HUDÁK, I. The Influence of Atomizing Media on the Quality of the Combustion of Liquid Fuels. Chemical Engineering Transactions, 2018, vol. 70, no. 1, p. 1483-1488. ISSN: 2283-9216.
Detail

NAVRÁTIL, J.; JIRÁSEK, A.; LOFTHOUSE A. J.; SATCHELL M. Effect of Flow Parameters Variation on Flutter Boundary of Benchmark Supercritical Wing. AIAA JOURNAL, 2018, vol. 57, no. 2, p. 772-781. ISSN: 0001-1452.
Detail

DRÁPAL, L.; VOPAŘIL, J. Investigation of torsional vibration of an innovative crank train concept for a four-cylinder engine. In KOKA 2018 Scientific Proceedings. Nitra: Publishing Centre of Slovak University of Agriculture in Nitra, 2018. p. 73-78. ISBN: 978-80-552-1880-9.
Detail

HADAŠ, Z.; SMILEK, J.; RUBEŠ, O. Energy harvesting from passing train as source of energy for autonomous trackside objects. In The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV). MATEC Web of Conferences. 211. Lisbon, Portugal: EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
Detail

DRÁPAL, L.; VOPAŘIL, J. Crank Train Concept Design of an In-Line Two-Cylinder Range Extender Engine. In Transport Means 2018 – Proceedings of the 22nd International Scientific Conference. Transport Means. Kaunas, Lithuania: Kaunas University of Technology, 2018. p. 978-982. ISSN: 1822-296X.
Detail

DRÁPAL, L.; VOPAŘIL, J.; PÍŠTĚK, V. Crank Train Concept Design and Balancing of an Internal-Combustion Engine for Range Extending of an Electric Vehicle. In Vibroengineering PROCEDIA. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. p. 279-283. ISSN: 2345-0533.
Detail

KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J.; HŮLKA, J.; PARK, N.; HUH, H. Comparative investigation of ductile fracture with 316L austenitic stainless steel in small punch tests: Experiments and simulations. Theoretical and Applied Fracture Mechanics, 2018, vol. 98, no. 1, p. 186-198. ISSN: 0167-8442.
Detail

KANDEVA, M.; ZADOROZHNAYA, E.; KALITCHIN, ZH.; SVOBODA, P. Tribological studies of high velocity oxy-fuel (HVOF) superalloy coatings. Journal of the Balkan Tribological Association, 2018, vol. 24, no. 3, p. 411-428. ISSN: 1310-4772.
Detail

HALAMA, J.; KLAPKA, M.; MAZŮREK, I. Experimental Methodology for Acoustic Diagnostics of Shock Absorbers. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2018, vol. 66, no. 5, p. 1119-1125. ISSN: 1211-8516.
Detail

SKALICKÝ, P.; KOUTNÝ, D.; PANTĚLEJEV, L.; PALOUŠEK, D. Processing of Aluminum Alloy EN AW 7075 Using Selective Laser Melting: Initial Study. In PROCEEDINGS OF 58TH INTERNATIONAL CONFERENCE OF MACHINE DESIGN DEPARTMENTS (ICMD 2017). PRAGUE, CZECH REPUBLIC: ZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2017. p. 330-335. ISBN: 978-80-213-2769-6.
Detail

ZIKMUND, P.; MACÍK, M.; DVOŘÁK, P.; MÍKOVEC, Z. Bio-inspired aircraft control. Aircraft Engineering and Aerospace Technology - An International Journal, 2018, vol. 90, no. 6, p. 983-991. ISSN: 1748-8842.
Detail

KOUTNÝ, D.; SKULINA, D.; PANTĚLEJEV, L.; PALOUŠEK, D.; LENCZOWSKI, B.; PALM, F.; NICK, A. Processing of Al-Sc aluminum alloy using SLM technology. In 10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES. Procedia CIRP. Elsevier BV, 2018. p. 44-48. ISSN: 2212-8271.
Detail

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Analytical Formula for the Ratio of Central to Minimum Film Thickness in a Circular EHL Contact. Lubricants, 2018, vol. 6, no. 3, p. 1-11. ISSN: 2075-4442.
Detail

SKŘIVÁNKOVÁ, V.; VLAŠIC, F.; SUCHÝ, J.; PALOUŠEK, D.; MAZAL, P. STUDY OF FATIGUE LOADING OF THE SLM AND CAST MATERIAL BY ACOUSTIC EMISSION METHOD. In Metal 2018 - 27th Internation Conference on Metallurgy and Materials, Conference Proceedings. Ostrava-Zabreh: TANGER LTD., 2018. p. 1345-1350. ISBN: 9788087294840.
Detail

SKŘIVÁNKOVÁ, V.; VLAŠIC, F.; MAZAL, P.; PALOUŠEK, D. Acoustic Emission Response to Fatigue Damage of Additively Produced and Cast Materials. In 12th European conference on Non-Destructive Testing. Gothenburg, Sweden: Sweden MEETX AB l Ref. ECNDT2018, 2018. p. 1-7. ISBN: 978-91-639-6217-2.
Detail

MAHMOUD, H.; VLAŠIC, F.; MAZAL, P. Damage Detection for Linear Pneumatic Actuators using Acoustic Emission. Conference Proceedings Ewgae 2018. Senlis, France: CETIM, 2018. p. 1-8.
Detail

NOVOTNÁ, V.; ČERVINKA, D. Current Distribution in The Tissue During Electroporation Process. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno: Institute of Electrical and Electronics Engineers Inc., 2018. p. 372-376. ISBN: 978-80-214-5544-3.
Detail

HNÍZDIL, M.; CHABIČOVSKÝ, M. Experimental study of in-line heat treatment of 1.0577 structural steel. In 17th International Conference on Metal Forming (METAL FORMING 2018). Procedia Manufacturing. Elsevier, 2018. p. 1696-1603. ISBN: 9781510869561. ISSN: 2351-9789.
Detail

HAVLÍK, P.; KOUŘIL, J.; DLOUHÝ, I. Improvement the root stability of thick welds during electron beam welding. In METAL 2018 - Conference Proceedings. 1. Keltickova 62, 710 00 Ostrava, Czech Republic, EU: Tanger Ltd., 2018. p. 700-705. ISBN: 978-80-87294-84-0.
Detail

ZIKMUND, P.; MACÍK, M.; MÍKOVEC, Z. Reaction on directional vibrations applied on joystick. New Trends in Civil Aviation. London, UK: CRC Press, 2018. p. 107-111. ISBN: 978-0-8153-7602-6.
Detail

OHNIŠŤOVÁ, P.; PÍŠKA, M.; PRAT, D. POLYNOMIAL INTERPOLATION IN 5-AXIS MILLING. MM Science Journal, 2018, vol. November 2, no. 4, p. 2512-2515. ISSN: 1803-1269.
Detail

PORTEŠ, P.; ZHÁŇAL, L.; FOJTÁŠEK, J. Complex approach to computations and analysis of vehicle dynamics. In Vibroengineering Procedia. Vibroengineering Procedia. Lithuania: JVE International, 2018. p. 132-137. ISSN: 2345-0533.
Detail

SYMONOV, V. FE Simulation of Bird Strike Tests of Composite Panels in MSC.Software. konference Engineering Mechanics 2018, Svratka, ČR: Czech Academy of Sciences, Prague, 2018. p. 837-840.
Detail

SYMONOV, V. FE simulation of bird strike tests of composite panels in MSC.Software. In ENGINEERING MECHANICS 2018 - Book of full texts. Engineering Mechanics .... 1. konference Engineering Mechanics 2018, Svratka, ČR: Czech Academy of Sciences, Prague, 2018. p. 837-840. ISBN: 978-80-86246-88-8. ISSN: 1805-8248.
Detail

MATĚJŮ, J. SIMPLE UNIVERSAL NONLINEAR LONGITUDINAL FLIGHT SIMULATION WITH AVOIDING OF STATIC AND DYNAMIC STABILITY DERIVATIVES. In 13th Research and Education in Aircraft Design Conference. 2018. p. 130-141. ISBN: 978-80-214-5696-9.
Detail

MATĚJŮ, J. Temperature measurement behind self-sustaining jet engine of a glider. In ENGINEERING MECHANICS 2018. Engineering Mechanics .... 2018. p. 545-548. ISBN: 978-80-86246-88-8. ISSN: 1805-8248.
Detail

MAŠEK, J.; KOUTNÝ, D.; POPELA, R. Thermal conductivity of Cu7.2Ni1.8Si1Cr Copper alloy produced via SLM and ability of thin-wall structure fabrication. In 13th Research and Education in Aircraft Design Conference. READ 2018, Brno, ČR: Brno University of Technology, 2018. p. 119-129. ISBN: 978-80-214-5696-9.
Detail

MAŠEK, J. Thermal conductivity of Cu7.2Ni1.8Si1Cr Copper alloy produced via SLM and ability of thin-wall structure fabrication. READ 2018, Brno, ČR: Brno University of Technology, 2018. p. 0-0.
Detail

MAŠEK, J. Thermo-vacuum test chamber development for airborne and space equipment testing in simulated extreme conditions. In ICAS 2018 - PROCEEDINGS. ICAS 2018, Belo Horizonte, Brazílie: The International Council of the Aeronautical Sciences, 2018. p. 1-9. ISBN: 978-3-932182-88-4.
Detail

MAŠEK, J. Thermo-vacuum test chamber development for airborne and space equipment testing in simulated extreme conditions. ICAS 2018, Belo Horizonte, Brazílie: The International Council of the Aeronautical Sciences, 2018. p. 1-9.
Detail

DE ALMEIDA GOUVÊA, L.; JAN, V.; DLOUHÝ, I. Preparation and Characterization of CoCrNi-Mo Metal Matrix Composite by Powder Metallurgy. In METAL 2018. 1st Edition, 2018. Brno: Tanger Ltd., 2018. p. 1545-1550. ISBN: 978-80-87294-84-0.
Detail

HALABUK, D.; NÁVRAT, T. The effect of third principal stress in the measurement of residual stresses by hole-drilling method. In MATEC Web of Conferences. MATEC Web of Conferences. EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
Detail

RAUDENSKÝ, M.; POHANKA, M.; VOTAVOVÁ, H.; ŘÍHA, Z.; ZELEŇÁK, M. Latest development of hydraulic descaling nozzles. Chicago: 2018. p. 1-5.
Detail

POHANKA, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; VOTAVOVÁ, H. Hydraulic descaling of wire coils during pickling program. 2018. p. 45-48.
Detail

ZELENÝ, M. Nanotwinning and Modulation of Martensitic Structures in Ni2MnGa Alloy: An ab initio Study. ACTA PHYSICA POLONICA A, 2018, vol. 134, no. 3, p. 658-661. ISSN: 1898-794X.
Detail

JEGLA, Z. Tepelná charakteristika hořáku pro předcházení přetěžování teplosměnných ploch ve spalovacích komorách. All for Power, 2018, roč. 12, č. 4, s. 66-67. ISSN: 1802-8535.
Detail

BANSOD, Y.; JAKKA, V.; BURŠA, J. Bendo-tensegrity model simulates compression test of animal cell. In Engineering Mechanics 2018. 2018. p. 45-48. ISBN: 978-80-86246-88-8.
Detail

RUBEŠ, O.; BRABLC, M.; HADAŠ, Z. Verified nonlinear model of piezoelectric energy harvester. In The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV). MATEC Web of Conferences. 211. Lisbon, Portugal: EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
Detail

KŠICA, F.; HADAŠ, Z. Prediction of position-dependent stability lobes based on reduced virtual model. In 14th International Conference on Vibration Engineering and Technology of Machinery, VETOMAC 2018 Proceedings. MATEC Web of Conferences. Lisbon, Portugal: EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
Detail

SMILEK, J.; HADAŠ, Z. Experimental evaluation of Tusi couple based energy harvester for scavenging power from human motion. In The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV). MATEC Web of Conferences. 211. Lisbon, Portugal: EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
Detail

BARTOŇOVÁ, P.; POLZER, S.; BURŠA, J. Definition of principal material directions at irregular arterial shapes. In Engineering Mechanics 2018. Engineering Mechanics .... 2018. p. 57-60. ISBN: 978-80-86246-88-8. ISSN: 1805-8256.
Detail

STRECKER, Z.; ROUPEC, J.; MAZŮREK, I.; MACHÁČEK, O.; KUBÍK, M. Influence of response time of magnetorheological valve in Skyhook controlled three-parameter damping system. Advances in Mechanical Engineering, 2018, vol. 10, no. 11, p. 1-8. ISSN: 1687-8140.
Detail

ŠEBEK, F.; PARK, N.; KUBÍK, P.; PETRUŠKA, J.; ZAPLETAL, J. Ductile fracture predictions in small punch testing of cold-rolled aluminium alloy. Engineering Fracture Mechanics, 2019, vol. 206, no. 1, p. 509-525. ISSN: 0013-7944.
Detail

ZUTH, D.; MARADA, T. Comparison of Faults Classification in Vibrodiagnostics from Time and Frequency Domain Data. In Mechatronika 2018. 2018. p. 482-487. ISBN: 978-80-214-5543-6.
Detail

PALOUŠEK, D.; KOUTNÝ, D.; SŮKAL, J. The effect of recycling powder steel on porosity and surface roughness of SLM parts. MM Science Journal, 2018, no. 5, p. 2643-2647. ISSN: 1805-0476.
Detail

FOJTLÍN, M.; PSIKUTA, A.; TOMA, R.; FIŠER, J.; JÍCHA, M. Determination of car seat contact area for personalised thermal sensation modelling. PLOS ONE, 2018, vol. 13, no. 12, p. 1-16. ISSN: 1932-6203.
Detail

NEVRLÝ, V.; ŠOMPLÁK, R.; PAVLAS, M.; KLEMEŠ, J. Waste Transportation and Facility Location Based on Cost and Impact of Emissions. In Book of abstracts. Proceedings of SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems. Zagreb, Croatia: Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2018. p. 1-7. ISSN: 1847-7178.
Detail

DRÁPAL, L.; VOPAŘIL, J. Design Concept of a Crankshaft for Reduction of Main Bearings Power Losses and a Deep Skirt Engine Block Load. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME) 2018. Brno: Brno University of Technology, 2018. p. 533-536. ISBN: 978-80-214-5543-6.
Detail

KOTOUL, M.; SKALKA, P.; PROFANT, T.; ŘEHÁK, P.; ŠESTÁK, P.; FRIÁK, M. Prediction of the Critical Energy Release Rate of Nanostructured Solids using the Laplacian Version of the Strain Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (CD). Scientific Net, 2018. p. 447-452. ISSN: 1662-9809.
Detail

TRČKA, T.; POLZER, A.; SEDLÁK, J. Shoulder End Mills with PCD Inserts Sharpened by Different Electrical Technologies. MM Science Journal, 2018, no. 4, p. 2536-2542. ISSN: 1805-0476.
Detail

KROPÁČ, J.; GREGOR, J.; PAVLAS, M. Waste-to-Energy Role in Circular Economy Concept - Modelling Approach. In Pomberger, R., Trieb, T. (Eds.): Tagungsband zur 14. Recy & DepoTech-Konferenz. Leoben, Austria: Montanuniversität Leoben, 2018. p. 1-8. ISBN: 978-3-200-05874-3.
Detail

URBÁN, A.; MALÝ, M.; JÓZSA, V.; JEDELSKÝ, J. Effect of liquid preheating on high-velocity airblast atomization: From water to crude rapeseed oil. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2019, vol. 102, no. 1, p. 137-151. ISSN: 0894-1777.
Detail

POPELA, P.; HRABEC, D.; KŮDELA, J.; ŠOMPLÁK, R.; PAVLAS, M.; ROUPEC, J.; NOVOTNÝ, J. Waste processing facility location problem by stochastic programming: Models and solutions. In Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing. Switzerland: Springer Nature, 2018. p. 167-179. ISBN: 9783319978871. ISSN: 2194-5357.
Detail

NOVOTNÝ, P.; ŠKARA, P.; HLINÍK, J. The effective computational model of the hydrodynamics journal floating ring bearing for simulations of long transient regimes of turbocharger rotor dynamics. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, vol. 148, no. 2018, p. 611-619. ISSN: 0020-7403.
Detail

NOVOTNÝ, P.; DLUGOŠ, J.; DOMAN, J.; HLINÍK, J.; JONÁK, M. Simulation approach for a solution of turbocharger rotordynamic noise. In Vibroengineering Procedia. Vibroengineering Procedia. Kaunas, Lithuania: JVE International, 2018. p. 144-149. ISSN: 2345-0533.
Detail

KUNZ, L.; HORNÍK, V.; HUTAŘ, P.; FINTOVÁ, S. Initiation of fatigue cracks and lifetime of Ni-base superalloys at high mean stress and temperature. Procedia Structural Integrity, 2017, vol. 7, no. 1, p. 44-49. ISSN: 2452-3216.
Detail

NAJMAN, J.; BASTL, M.; APPEL, M.; GREPL, R. Computationally Fast Dynamical Model of a SATCOM Antenna Suitable for Extensive Optimization Tasks. Advances in Military Technology, 2019, vol. 14, no. 1, p. 21-30. ISSN: 1802-2308.
Detail

MORAVČÍK, I.; KOVÁČOVÁ, Z.; KITZMANTECH, M.; NEUBAUER, E.; DLOUHÝ, I. Mechanical and Microstructural Characterization of Powder Medium Entropy Alloy. Materials Science Forum, 2018, vol. 941, no. 1, p. 976-981. ISSN: 0255-5476.
Detail

DE ALMEIDA GOUVÊA, L.; MORAVČÍK, I.; ČÍŽEK, J.; KRAJŇÁKOVÁ, P.; JAN, V.; DLOUHÝ, I. Characterization of Powder Metallurgy High-Entropy Alloys Prepared by Spark Plasma Sintering. Materials Science Forum, 2018, vol. 941, no. 1, p. 1053-1058. ISSN: 0255-5476.
Detail

VONDRA, M.; MÁŠA, V.; TOUŠ, M.; KONEČNÁ, E. Vacuum evaporation of a liquid digestate from anaerobic digestion: a techno-economic assessment. Chemical Engineering Transactions, 2018, vol. 70, no. 1, p. 769-774. ISSN: 2283-9216.
Detail

VOSYNEK P., NÁVRAT T., KREJBYCHOVÁ A., PALOUŠEK D. Influence of process parameters of printing on mechanical properties of plastic parts produced by FDM 3D printing technology. In MATEC Web of Conferences. MATEC Web of Conferences. EDP Sciences, 2018. p. 1-6. ISSN: 2261-236X.
Detail

POKORNÝ, J.; FIŠER, J.; TOMA, R.; FOJTLÍN, M.; JÍCHA, M. Visualisation of temperatures and heat fluxes in contact area of automotive seat. 12th International Manikin and Modelling Meeting (12i3m), 29-31 Aug 2018, St. Gallen, Switzerland: 2018.
Detail

HRUBOŠ, D.; KOUTECKÝ, T.; PALOUŠEK, D. An experimental study for determination of an application method and TiO2 powder to ensure the thinnest matte coating layer for 3D optical scanning. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2018, vol. 136, no. March 2019, p. 42-49. ISSN: 0263-2241.
Detail

POKORNÝ, J.; KOPEČKOVÁ, B.; FIŠER, J.; TOMA, R.; JÍCHA, M. Využití termofyziologického modelu na určení tepelné zátěže člověka v ochranných oděvech. In HAZMAT PROTECT 2018, 3. ročník odborné konference o ochraně proti CBRN látkám SBORNÍK ABSTRAKTU + DVD s celými články. SÚJCHBO, v. v. i., Kamenná, Česká republika. 2018. s. 1-10. ISBN: 978-80-270-4852-6.
Detail

Schroeder F; POLZER, S.; SLAŽANSKÝ, M.; MAN, V.; SKÁCEL, P. Predictive capabilities of various constitutive models for arterial tissue. Journal of the mechanical behavior of biomedical materials, 2018, vol. 78, no. 1, p. 369-380. ISSN: 1751-6161.
Detail

HADAŠ, Z.; SMILEK, J. Efficiency of vibration energy harvesting systems. In Energy Harvesting for Wireless Sensor Networks Technology, Components and System Design. Berlin/Munich/Boston: Walter de Gruyter GmbH, 2018. p. 45-64. ISBN: 9783110445053.
Detail

BARTULI, E.; RAUDENSKÝ, M. NUMERICAL INVESTIGATION OF HEAT TRANSFER ON THE OUTER SURFACE OF POLYMERIC HOLLOW FIBERS. Materiali in tehnologije, 2018, vol. 52, no. 4, p. 459-463. ISSN: 1580-2949.
Detail

JECHA, D.; BRUMMER, V.; KREJČÍ, T.; JÍCHA, J. Removal of NOx at pilot unit using commercially available catalysts. In Conference Proceeding 23rd International Congress of Chemical and Process Engineering, CHISA 2018 and 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2018. Prague, Czech republic: Czech Society of Chemical Engineering, 2018. p. 218-223. ISBN: 9781510881198.
Detail

BANSOD, Y.; MATSUMOTO, T.; NAGAYAMA, K.; BURŠA, J. A Finite Element Bendo-Tensegrity Model of Eukaryotic Cell. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 2018, vol. 140, no. 10, p. 1-9. ISSN: 0148-0731.
Detail

OSTRÝ, M.; BANTOVÁ, S.; CHARVÁT, P.; KLIMEŠ, L. Investigation of compatibility of organic and inorganic PCMs with the materials of containers. In 12th IIR/IIF International Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning PCM 2018. BOOK OF PROCEEDINGS. 2018. p. 373-378. ISBN: 978-2-36215-025-8.
Detail

KREJČIŘÍK, P.; ŠKAROUPKA, D.; PALOUŠEK, D. Free directional robotic deposition - influence on overhang printability. MM Science Journal, 2018, vol. 2018, no. 12, p. 2715-2721. ISSN: 1805-0476.
Detail

MAN, V.; POLZER, S.; GASSER, T.; NOVOTNÝ, T.; BURŠA, J. Impact of isotropic constitutive descriptions on the predicted peak wall stress in abdominal aortic aneurysms. MEDICAL ENGINEERING & PHYSICS, 2018, vol. 53, no. 1, p. 49-57. ISSN: 1350-4533.
Detail

CHABIČOVSKÝ, M.; RESL, O.; RAUDENSKÝ, M. Influence of the oxide layer on the spray cooling intensity. 297 Euston Road, London NW1 3AD, UK: IOM3, 2018. p. 15-18.
Detail

VONDRA, M.; MÁŠA, V.; TOUŠ, M.; KONEČNÁ, E. Vacuum Evaporation Of Wastewater As A Mean For Nutrient Recovery And Waste Heat Utilization In Biogas Plants. 2018.
Detail

VONDRA, M.; KONEČNÁ, E.; MÁŠA, V.; TOUŠ, M. Development of a novel vacuum evaporator for liquid digestate treatment. Progress in the treatment and application of manure and digestate products - Abstracts booklet. Schwäbisch Hall, Deutschland: 2018. p. 49-49.
Detail

HUZLÍK, R.; HABÁN, V.; KROUPA, M.; HUDEC, M. Evaluation of Pressure Pulsation Frequency by Motor Current Signature Analysis. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). Brno: Brno University of Technolgy, 2018. p. 511-515. ISBN: 978-80-214-5543-6.
Detail

DANĚK, V. MECHANIKA KOSMICKÉHO LETU. 1. 1. Brno: Akademické nakladatelství CERM , s.r.o., 2018. 305 s. ISBN: 978-80-7204-984-4.
Detail

ŠPLÍCHAL, M. Reduction in the pilot’s stress during the landing maneuver by providing accurate height information. In Research and Education in Aircraft Design 2018. 1. Brno: 2019. p. 23-30. ISBN: 978-80-214-5696-9.
Detail

KOPEČKOVÁ, B.; POKORNÝ, J.; JÍCHA, M. Study of the individualization of the passive system Fiala‐based human thermophysiological model. 2018. p. 1-2.
Detail

MAHMOUD, H.; MAZAL, P.; VLAŠIC, F. Метод акустической эмиссии для неразрушающего контроля пневматических цилиндров. NDT world, 2018, roč. 21, č. 4, s. 64-67. ISSN: 1609-3178.
Detail

RICHTER, V; MAZAL, P.; MAHMOUD, H.; SKŘIVÁNKOVÁ, V. Parameters of Acoustic Emission Signal Proposed to Identification of Damaged and Undamaged Cylinders. 33rd European Conference on Acoustic Emission (EWGAE). 1. SENLIS, France: CETIM Senlis, 2018. p. 51-63.
Detail

KRYSTÝNOVÁ, M.; DOLEŽAL, P.; FINTOVÁ, S.; ZAPLETAL, J.; MARADA, T.; WASSERBAUER, J. Characterization of Brittle Phase in Magnesium Based Materials Prepared by Powder Metallurgy. Key Engineering Materials (web), 2018, no. 784, p. 61-66. ISSN: 1662-9795.
Detail

RAUDENSKÝ, M.; TSENG, A. Thermal Performance Study of Polymeric Hollow-Fiber Heat-Exchangers. 2018. p. 1-10.
Detail

RICHTER, V.; MAHMOUD, H.; MAZAL, P.; SKŘIVÁNKOVÁ, V. The Parameters of Acoustic Emission Signal Proposed to Identification of Damaged and Undamaged Cylinders. European Conference on Acoustic Emission (EWGAE) 2018. Senlis, France: CETIM, 2018. p. 1-13.
Detail

KOTEK, L.; TRÁVNÍČEK, P.; TŮMA, Z.; NOVOTNÝ, L. DEVELOPMENT OF PRODUCTION MACHINES WITH RESPECT TO THE HUMAN FACTORS. Transactions of the VSB - Technical University of Ostrava, Safety Engineering Series, 2019, vol. XIII, no. 2, p. 49-54. ISSN: 1805-3238.
Detail

FIŠER, J.; POKORNÝ, J.; FOJTLÍN, M.; TOMA, R.; JÍCHA, M. Equivalent temperature calculation: The issue of total thermal resistance for Face and Scalp parts measured by thermal manikin. 12th International Manikin and Modelling Meeting (12i3m), 29-31 Aug 2018, St. Gallen, Switzerland: 2018.
Detail

MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; OTOUPALÍK, J.; FIŠEROVÁ, Z.; FIALA, Z. Micro-milling machinability of pure molybdenum. International Journal of Advanced Manufacturing Technology, 2019, vol. 102, no. 9, p. 4153-4165. ISSN: 1433-3015.
Detail

PEČ, M.; ŠEBEK, F.; ZAPLETAL, J.; PETRUŠKA, J.; HASSAN, T. Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351. Advances in Mechanical Engineering, 2019, vol. 11, no. 3, p. 1-14. ISSN: 1687-8140.
Detail

ŠEBESTOVÁ, H.; HORNÍK, P.; MRŇA, L.; DOLEŽAL, P.; MIKMEKOVÁ, E. The Effect of Arc Current on Microstructure and Mechanical Properties of Hybrid LasTIG Welds of High-Strength Low-Alloy Steels. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2018, vol. 49, no. 6, p. 3559-3569. ISSN: 1073-5615.
Detail

ŽÁK, L.; VALIŠ, D.; VINTR, Z. System Condition Assessment Based on Mathematical Analysis. In 2018 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2018. London: Taylor & Francis Group, 2019. p. 222-226. ISBN: 978-1-5386-6786-6.
Detail

HÁJEK, J.; VONDÁL, J.; JUŘENA, T.; SLÁMA, J. What the Combustion Engineer Gains from CFD Modeling: Gas Furnace. Chemical Engineering and Technology, 2019, vol. 42, no. 4, p. 835-842. ISSN: 1521-4125.
Detail

ŽÁK, L.; VALIŠ, D.; ŽÁKOVÁ, L. One of the Possible Ways to Find Partial Dependencies in Multidimensional Data. In Recent Advances in Soft Computing. Switzerland: Springer, 2019. p. 254-261. ISBN: 978-3-319-97887-1.
Detail

STREJČEK, J.; ŽÁK, L.; DVOŘÁK, J. Usage of the fuzzy logic to predict surface quality of machined parts during milling opeartion. MM Science Journal, 2018, vol. 2018, no. 11, p. 2547-2551. ISSN: 1803-1269.
Detail

MATĚJŮ, J. SIMPLE UNIVERSAL NONLINEAR LONGITUDINAL FLIGHT SIMULATION WITH AVOIDING OF STATIC AND DYNAMIC STABILITY DERIVATIVES. 2018. p. 130-141.
Detail

MATĚJŮ, J. Temperature measurement behind self-sustaining jet engine of a glider. 2018. p. 545-548.
Detail

MATĚJŮ, J.; ZIKMUND, P. WING TIP VORTEX RANS AND LES SIMULATION AND MEASUREMENT OF THE MEAN CHARACTERISTICS. 2016. p. 374-377.
Detail

VALIŠ, D.; ŽÁK, L.; VINTR, Z. Application of fuzzy inference system for analysis of oil field data to optimize combustion engine maintenance. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2019, no. 2, p. 3736-3745. ISSN: 0954-4070.
Detail

OMASTA, M.; ADAM, J.; ŠPERKA, P.; KŘUPKA, I.; HARTL, M. On the Temperature and Lubricant Film Thickness Distribution in EHL Contacts with Arbitrary Entrainment. Lubricants, 2018, vol. 6, no. 4, p. 1-12. ISSN: 2075-4442.
Detail

ŠEBESTOVÁ, H.; HORNÍK, P.; MRŇA, L.; DOLEŽAL, P. Microstructure and mechanical properties of hybrid LasTIG welds of HSLA steel. In 10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES. Procedia CIRP. Elsevier B.V., 2018. p. 743-747. ISSN: 2212-8271.
Detail

Manfreda, Salvatore; Dvorak, Petr; Mullerova, Jana; Herban, Sorin; Vuono, Pietro; Justel, Jose; Perks, Matthew. Assessing the Accuracy of Digital Surface Models Derived from Optical Imagery Acquired with Unmanned Aerial Systems. Drones, 2019, vol. 3, no. 1, p. 1-14. ISSN: 2504-446X.
Detail

Esther Andrés-Pérez, Daniel González-Juarez, Mario Martin, Emilano Iuliano, Davide Cinquegrana, Gerald Carrier, Jacques Peter, Didier Bailly, Olivier Amoignon, Petr Dvorak, David Funes, Per Weinerfelt, Leopoldo Carro, Sancho Salcedo, Yaochu Jin, John Doherty, Handing Wang. Garteur AD/AG-52: Surrogate-Based Global Optimization Methods in Preliminary Aerodynamic Design. In Evolutionary and Deterministic Methods for Design Optimization and Control With Applications to Industrial and Societal Problems. Computational Methods in Applied Sciences. 49. New York, USA: Springer Nature, 2018. p. 195-210. ISBN: 978-3-319-89890-2.
Detail

POCHYLÝ, F.; RUDOLF, P.; ŠTEFAN, D.; MORAVEC, P.; STEJSKAL, J.; SKOTÁK, A. Design of a pump-turbine using a quasi-potential flow approach, mathematical optimization and CFD. In IOP Conference Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. IOP Publishing, 2019. p. 1-10. ISSN: 1755-1315.
Detail

FOJTLÍN, M.; PSIKUTA, A.; FIŠER, J.; TOMA, R.; ANNAHEIM, S.; JÍCHA, M. Local clothing properties for thermo-physiological modelling: Comparison of methods and body positions. BUILDING AND ENVIRONMENT, 2019, vol. 2019, no. 155, p. 376-388. ISSN: 0360-1323.
Detail

HAVLÍK, P.; KOUŘIL, J.; VÁLKA, L.; DLOUHÝ, I.; CHALUPNÍK, P. The production optimization of steel impellers by using of the electron beam welding method. In Technological Forum 2019 - Book of Proceeding. 1. Jaroměř: TISK AS, s.r.o., 2019. p. 235-241. ISBN: 978-80-87583-30-2.
Detail

TSENG, A.; RAUDENSKÝ, M. Meat Consumption and Its Impact on Greenhouse Gas Emission from Group of Twenty (G20) and The World. RAdvFoodSci, 2018, vol. 1, no. 1, p. 11-22. ISSN: 2601-5412.
Detail

Air filtration performance of hollow-fibre membranes for submicron particles removal. 10th World Congress of Chemical Engineering 2017. Barcelona: 2017. p. 970-970. ISBN: 978-84-697-8629-1.
Detail

BEDNAŘÍK, A.; MACHÁLKOVÁ, M.; MOSKOVETS, E.; COUFALÍKOVÁ, K.; KRÁSENSKÝ, P.; HOUŠKA, P.; KROUPA, J.; NAVRÁTILOVÁ, J.; ŠMARDA, J.; PREISLER, J. MALDI MS Imaging at Acquisition Rates Exceeding 100 Pixels per Second. JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY, 2019, vol. 30, no. 2, p. 289-298. ISSN: 1044-0305.
Detail

BURŠA, J.; SLAŽANSKÝ, M. Computational investigation of the impact of assumption of affine deformation on constitutive models of soft tissues. Applied andComputational Mechanics, 2019, vol. 13, no. 2, p. 99-106. ISSN: 1802-680X.
Detail

VAVERKA, J.; MOUDR, J.; LOKAJ, P.; BURŠA, J.; PÁSEK, M. Impact of Decreased Transmural Conduction Velocity on the Function of the Human Left Ventricle: A Simulation Study. BioMed Research International, 2020, vol. 2020, no. 1, p. 1-11. ISSN: 2314-6133.
Detail

NAVRÁTIL, J. High-fidelity static aeroelastic simulations of the common research model. In Flexible Engineering Toward Green Aircraft. Lecture Notes in Applied and Computational Mechanics. Springer, 2020. p. 49-70. ISBN: 978-3-030-36514-1. ISSN: 1613-7736.
Detail

OPLUŠTIL, Z. On a Nonlocal Boundary Value Problem for First Order Nonlinear Functional Differential Equations. In DIFFERENTIAL AND DIFFERENCE EQUATIONS WITH APPLICATIONS. Springer Proceedings in Mathematics & Statistics. NEW YORK: SPRINGER, 2018. p. 359-371. ISBN: 978-3-319-75646-2. ISSN: 2194-1009.
Detail

STODOLA, J.; NOVOTNÝ, P. Virtual Engine a Tool for Truck Reliability Increase. In 4TH INTERNATIONAL CONFERENCE ON MANUFACTURING AND INDUSTRIAL TECHNOLOGIES (ICMIT 2017). IOP Conference Series: Materials Science and Engineering. 4. Lisbon, PORTUGAL: IOP Publishing, 2017. p. 1-5. ISSN: 1757-899X.
Detail

MORAVČÍK, I.; ČÍŽEK, J.; DLOUHÝ, I. MECHANICAL PROPERTIES OF HIGH ENTROPY ALLOY TiC REINFORCED IN-SITU COMPOSITE. In 27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018). Brno: TANGER Ltd., 2018. p. 1635-1640. ISBN: 978-80-87294-84-0.
Detail

ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Modelling of fracture in brittle solids using FEM and finite fracture mechanics. Greece: 2017. p. 928-929.
Detail

KRAJŇÁKOVÁ, P.; ČUPERA, J.; JAN, V.; DLOUHÝ, I. STUDY OF THE ELECTRON BEAM REMELTING OF A CGDS DEPOSITED CONICRALY LAYERS. In METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS. KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC: TANGER LTD, 2017. p. 1333-1337. ISBN: 978-80-87294-79-6.
Detail

JAN, V.; ČUPERA, J.; HAVLÍK, P. ELECTRON BEAM WELDING OF TUNGSTEN AND ODS ALLOYS. In METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS. KELTICKOVA 62, SLEZSKA, OSTRAVA 710 00, CZECH REPUBLIC: TANGER LTD, 2017. p. 1746-1750. ISBN: 978-80-87294-79-6.
Detail

POSPÍŠIL, J.; JÍCHA, M. Vehicle induced turbulence as key factor influencing pollutant dispersion in close vicinity of traffic paths. In HARMO 2016 - 17th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, 2016. Proceedings. Budapest: Hungarian Meteorological Service, 2016. p. 365-399. ISBN: 9789639931107.
Detail

POSPÍŠIL, J.; JÍCHA, M. Numerical modelling of transient pollutant dispersion in urban street intersection with detail inclusion of traffic dynamics. In HARMO 2017 - 18th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, Proceedings. Volume 2017-October. Budapešť: Hungarian Meteorological Service, 2017. p. 517-521. ISBN: 9789639931107.
Detail

NEČAS, D.; VRBKA, M.; GALLO, J.; GALANDÁKOVÁ, A.; KŘUPKA, I.; HARTL, M. An Investigation of Lubrication Mechanisms within Hard-on-soft Hip Implants: A Pilot Study. In Proceedings of Asia International Conference on Tribology 2018 (ASIATRIB 2018). Malajsie: Malaysian Tribology Society, 2018. p. 149-150. ISBN: 978-967-13625-2-5.
Detail

GALAS, R.; OMASTA, M.; KŘUPKA, I.; HARTL, M. Influence of climatic conditions on adhesion in the wheel-rail contact. In Proceedings of Asia International Conference on Tribology 2018. Malajsie: Malaysian Tribology Society, 2018. p. 242-243. ISBN: 978-967-13625-2-5.
Detail

HOUDKOVÁ, Š.; ŠPERKA, P.; REPKA, M.; MARTAN, J.; MOSKAL, D. Shifted laser surface texturing for bearings applications. In 6th International Conference on Fracture Fatigue and Wear 26–27 July 2017, Porto, Portugal. Journal of Physics: Conference Series. BRISTOL: IOP PUBLISHING LTD, 2017. p. 1-10. ISSN: 1742-6588.
Detail

SOBOTOVÁ, J.; JURČI, P.; DLOUHÝ, I. The effect of subzero treatment on microstructure, fracture toughness, and wear resistance of Vanadis 6 tool steel. Materials Science and Engineering A, 2015, vol. 652, no. 1, p. 192-204. ISSN: 0921-5093.
Detail

JAŠÍKOVÁ, D.; KOTEK, M.; POCHYLÝ, F. KOPECKÝ, V. Flow field velocity measurement of liquid interaction with rigid and flexible wall. In EFM18 – Experimental Fluid Mechanics 2018. EPJ Web of Conferences. 2019. p. 1-4. ISSN: 2100-014X.
Detail

SYMONOV, V. Bird strike simulations in MSC.Software: correlation between the experiments and simulations. In 32nd Congress of the International Council of the Aeronautical Sciences, ICAS 2021. 32nd Congress of the International Council of the Aeronautical Sciences, Shanghai, China: ICAS, 2021. p. 1-11. ISBN: 9783932182914.
Detail

ZHÁŇAL, L.; PORTEŠ, P. Calculation of mechanism motion using discrete time approach. Vibroengineering Procedia, 2018, vol. 18, no. 18, p. 222-225. ISSN: 2345-0533.
Detail

MAZŮREK, I.; Vysoké učení technické v Brně Technická 2896/2 616 69 BRNO Česká Republika: Způsob zjišťování útlumových vlastností náprav jednostopých vozidel. 304768, patent. (2014)
Detail

ANDRŠ, O.; KOVÁŘ, J.; VETIŠKA, V.; Vysoké učení technické v Brně: Samohybná pojízdná platforma. 26610, užitný vzor. (2014)
Detail

MALÁŠEK, J.; Vysoké učení technické v Brně: Ventilační zařízení. 305397, patent. (2015)
Detail

KLAPKA, M.; MAZŮREK, I.; Vysoké učení technické v Brně Technická 2896/2 616 69 BRNO Česká Republika: Způsob testování radiálního uložení hřídelů. 304632, patent. (2014)
Detail

HÁJEK, J.; JUŘENA, T.; VONDÁL, J.; Vysoké učení technické v Brně, Brno, CZ: Redukční ventil. 28199, užitný vzor. (2015)
Detail

JEDELSKÝ, J.; JÍCHA, M.; LÍZAL, F.; BĚLKA, M.; Vysoké učení technické v Brně, Antonínská 548/1, 601 90 Brno: Simulátor dýchání. 306136, patent. (2016)
Detail

HOLUB, M.; BLECHA, P.; BRADÁČ, F.; PAVLÍK, J.; VETIŠKA, J.; FLEKAL, L.; Vysoké učení technické v Brně, Brno, CZ: Zařízení pro měření přesnosti chodu vřetene pod statickým zatížením. 305589, patent. (2015)
Detail

ASTROUSKI, I.; RAUDENSKÝ, M.; SCHMIDT, M.; REPPICH, M.; Vysoké učení technické v Brně, Brno, CZ Marcus Reppich prof. Dr. Ing., 86199 Augsburg, DE: Chlazený fotovoltaický solární modul. 305632, patent. (2015)
Detail

POHANKA, M.; Vysoké učení technické v Brně, Brno, CZ: Způsob a zařízení ke stanovení polohy teplotního čidla. 305609, patent. (2015)
Detail

POPELA, R.; DANIEL, M.; PEJCHAR, J.; BÁBOVKA, M.; Galaxy GRS s.r.o., Liberec III, CZ Vysoké učení technické v Brně, Letecký ústav, Brno, CZ: Záchranný vystřelovací systém zejména pro multikoptéry. 305548, patent. (2015)
Detail

POPELA, R.; DANIEL, M.; PEJCHAR, J.; BÁBOVKA, M.; NĚMČÁK, O.; Vysoké učení technické v Brně, Brno, CZ Ing. Milan Bábovka, Liberec, CZ: Záchranné zařízení pro bezpilotní letecké prostředky. 28081, užitný vzor. (2015)
Detail

GREPL, R.; PALOUŠEK, D.; KREJČÍ, P.; VEJLUPEK, J.; MISTRÍK, M.; Univerzita Palackého, Olomouc, CZ Vysoké učení technické v Brně, Brno, CZ: Biologický inkubátor pro uchovávání a přepravu biologických vzorků, zejména buněčných kultur. 28195, užitný vzor. (2015)
Detail

GUZEJ, M.; HORSKÝ, J.; Vysoké učení technické v Brně, Brno, CZ: Zařízení ke zvlhčení vnitřního prostoru světlometu. 305743, patent. (2016)
Detail

HORSKÝ, J.; HRABOVSKÝ, J.; GUZEJ, M.; Vysoké učení technické v Brně, Brno, CZ: Způsob měření emisivity lesklých povrchů. 305705, patent. (2015)
Detail

SKRYJA, P.; BĚLOHRADSKÝ, P.; STEHLÍK, P.; KERMES, V.; Vysoké učení technické v Brně, Brno, CZ: Hořáková hlava injektorového stabilizačního hořáku. 305842, patent. (2016)
Detail

POCHYLÝ, F.; ŘÍHA, Z.; Vysoké učení technické v Brně, Brno, CZ: Hydraulický nástroj, zejména pro chlazení a čištění povrchů těles. 306290, patent. (2016)
Detail

POCHYLÝ, F.; FIALOVÁ, S.; HAVLÁSEK, M.; MIKULÁŠEK, J.; KRAMEROVÁ, N.; Vysoké učení technické v Brně, Brno, CZ ASIO, spol. s r.o., Brno, Horní Heršpice, CZ ČKD Blansko Engineering, a.s., Blansko, CZ: Hydraulický stroj na principu Archimedova šroubu. 306978, patent. (2017)
Detail

VĚCHET, S.; KREJSA, J.; Vysoké učení technické v Brně, Brno: Senzorická síť s topologií binárního stromu. 306855, patent. (2017)
Detail

SMILEK, J.; HADAŠ, Z.; Vysoké učení technické v Brně, Brno, CZ: Zařízení pro výrobu elektrické energie. 31234, užitný vzor. (2017)
Detail

SMILEK, J.; HADAŠ, Z.; Vysoké učení technické v Brně, Brno, CZ: Nositelné zařízení pro výrobu elektrické energie. 307799, patent. (2019)
Detail

JECHA, D.; SKRYJA, P.; BRUMMER, V.; VUT v Brně: Multifunkční poloprovozní jednotka pro snižování polutantů z odpadního plynu. 307108, patent. (2017)
Detail

PEJCHAR, J.; DANIEL, M.; POPELA, R.; BÁBOVKA, M.; NĚMČÁK, O.; Milan Bábovka, 46001 Liberec, CZ Vysoké učení technické v Brně, Letecký ústav, Brno, CZ: Emergency equipement for unmanned aerial vehicles. EP3050805, patent. (2017)
Detail

RAUDENSKÝ, M.; Vysoké učení technické v Brně, Brno, CZ: Modul výměníku na bázi dutých polymerních vláken. 307033, patent. (2017)
Detail

RAUDENSKÝ, M.; Vysoké učení technické v Brně, Brno, CZ: Výměník tepla na bázi polymerních vláken a způsob jeho vytvoření. 307245, patent. (2018)
Detail

MÁŠA, V.; BOBÁK, P.; KUBA, P.: Model ENP; Technologická linka pro průmyslovou údržbu prádla. areál FSI VUT v Brně, budova D5 NETME Centre, m.č. 107. (poloprovoz)
Detail

PALOUŠEK, D.; KŘEMEN, J.: Krem.prot.01; Transtibiální protéza pro rekreační plavání. laboratoř č. A4/516 ÚSTAV KONSTRUOVÁNÍ Fakulta strojního inženýrství Vysoké učení technické v Brně Technická 2896/2 616 69 BRNO Česká Republika. (funkční vzorek)
Detail

PALOUŠEK, D.; KOUKAL, O.: Protéza HK02; Mechanická protéza horní končetiny. laboratoř č. A4/516 ÚSTAV KONSTRUOVÁNÍ Fakulta strojního inženýrství Vysoké učení technické v Brně Technická 2896/2 616 69 BRNO Česká Republika. (funkční vzorek)
Detail

FIŠER, P.; KOUTNÝ, D.: VYS_NPR_1; Výsuvná zadní náprava malého městského automobilu. Termobit s.r.o. Zábrdovická 2 Brno 61500. URL: http://pom.uk.fme.vutbr.cz/pdf_projekt.php?id=301. (funkční vzorek)
Detail

LANG, R.; KOUTNÝ, D.: AUG_01; Augmentační prvek pro revizní implantát kolenního kloubu. Beznoska, s.r.o. Dělnická 2727 Kladno 2 - Kročehlavy 272 01. URL: http://pom.uk.fme.vutbr.cz/pdf_projekt.php?id=303. (funkční vzorek)
Detail

SABO, K.; KOUTNÝ, D.; KREJČÍ, P.; PALOUŠEK, D.: ETAB02; Experimentální adaptér pro zjišťovaní namáhaní transtibiálni protézy při in-line bruslení. Budova A4 místnost 503 ÚSTAV KONSTRUOVÁNÍ Fakulta strojního inženýrství Vysoké učení technické v Brně Technická 2896/2 616 69 BRNO Česká republika. URL: http://pom.uk.fme.vutbr.cz/pdf_projekt.php?id=304. (funkční vzorek)
Detail

SKRYJA, P.; STEHLÍK, P.; LEŠTINSKÝ, P.: Bubnová sušárna; Rotační bubnová sušárna. C3-zkušebna hořáků. (ověřená technologie)
Detail

SKRYJA, P.; STEHLÍK, P.: Žíhací a sintrovací linka; Žíhací a sintrovací linka. C3 - zkušebna hořáků. (ověřená technologie)
Detail

ŠTĚTINA, J.: PANKNX; Testovací a vývojový panel vytápění a větrání s KNX. C3/314b. URL: http://www.energetickeforum.cz/fsi-vut-v-brne/vysledky-vyzkumu. (funkční vzorek)
Detail

JEDELSKÝ, J.; ZAREMBA, M.; MALÝ, M.; ĎURDINA, L.; JÍCHA, M.: Stend-maly-TVT; Systém pro funkční zkoušky palivové trysky. Vysoké učení technické v Brně, Fakulta strojního inženýrství, Technická 2896/2, 61669 Brno, místnost C3/0213d. URL: http://www.energetickeforum.cz/fsi-vut-v-brne/vysledky-vyzkumu. (funkční vzorek)
Detail

KOVÁŘ, J.; ANDRŠ, O.; KREJSA, J.; HADAŠ, Z.: JK2CSCONFSYS; JK2CS Konferenční systém. B1/313, Technická 2, FSI VUT v Brně. URL: http://jk2cs.fme.vutbr.cz/. (software)
Detail

ANDRŠ, O.; KOVÁŘ, J.; HADAŠ, Z.; KREJSA, J.: JK2CS-DATAPP; Aplikace pro správu konferenčního systému. B1/313. URL: http://jk2cs.fme.vutbr.cz. (software)
Detail

KREJSA, J.; HADAŠ, Z.; KOVÁŘ, J.; ANDRŠ, O.: JK2CS - HADAPP; Conference system standalone management. A2/710. URL: http://jk2cs.fme.vutbr.cz. (software)
Detail

KLAPKA, M.; NEVRLÝ, J.; NĚMEC, Z.; BRANDEJS, J.; PANÁČEK, T.: ValveBlock1; Ventilový blok pro modul hydraulické rekuperace verze 1. Bosch Rexroth, spol. s r.o. Těžební 2 627 00 Brno. URL: http://pom.uk.fme.vutbr.cz/pdf_projekt.php?id=320. (funkční vzorek)
Detail

KLAPKA, M.; NEVRLÝ, J.; NĚMEC, Z.; BRANDEJS, J.; PANÁČEK, T.: ValveBlock2; Ventilový blok pro modul hydraulické rekuperace verze 2. Bosch Rexroth, spol. s r.o. Těžební 2 627 00 Brno. URL: http://pom.uk.fme.vutbr.cz/pdf_projekt.php?id=321. (funkční vzorek)
Detail

KLAPKA, M.; NEVRLÝ, J.; NĚMEC, Z.; BRANDEJS, J.; PANÁČEK, T.: HRVC-1; Řídicí software modulu pro rekuperaci hydraulické energie. Bosch Rexroth, spol. s r.o. Těžební 2 627 00 Brno. URL: http://pom.uk.fme.vutbr.cz/pdf_projekt.php?id=322. (software)
Detail

PECH, O.; ZÁVODNÍK, M.; JEDELSKÝ, J.; JÍCHA, M.: Benchmarková výustka; Benchmarková výustka. Fakulta strojního inženýrství VUT v Brně Technická 2896/2 Brno 616 69 místnost C3/213c. URL: http://www.energetickeforum.cz/fsi-vut-v-brne/vysledky-vyzkumu. (funkční vzorek)
Detail

CEJPEK, J.: Sférická projekční plocha R2; Návrh a výpočet kompozitní sférické plochy R2, +45-45H, 225V. SAAB czech, Slavkov u Brna. (funkční vzorek)
Detail

PEJCHAR, J.; POPELA, R.; DANIEL, M.: Galaxy GBS10; Záchranný systém GBS 10. C3a/3.07. (prototyp)
Detail

PEJCHAR, J.; MARVAN, A.: Sedaq III; Autonomní měřící a záznamová ustředna Sedaq III. Netme C3a/ 307. (funkční vzorek)
Detail

DVOŘÁK, P.; PEJCHAR, J.; BROŽEK, P.: VUT712; Bezpilotní systém VUT 712. C3A/3.07. URL: http://lu.fme.vutbr.cz/produkty/vut712.pdf. (funkční vzorek)
Detail

SKRYJA, P.; BĚLOHRADSKÝ, P.; HUDÁK, I.; STEHLÍK, P.: ZPH 1500 R; Hořák s vnitřní recirkulací spalin. ÚPI FSI VUT v Brně - Zkušebna hořáků. (funkční vzorek)
Detail

ŠTĚTINA, J.; MAUDER, T.; KLIMEŠ, L.; KAVIČKA, F.: BRDSMcore; BRDSM core: A complex dynamic system of quality management continuously cast steel. Technická 2, Brno A2/314 servrovna. URL: http://www.energetickeforum.cz/fsi-vut-v-brne/vysledky-vyzkumu/brdsm-core-komplexni-system-dynamickeho-rizeni-kvality. (software)
Detail

PEJCHAR, J.; HÁJEK, T.: PASQ; Zařízení pro odjištění pojistné jehly padákových záchranných systémů. Letecký ústav, Fakulta strojního inženýrství, Technická 2896/2, 616 69 Brno. (funkční vzorek)
Detail

JECHA, D.; BÉBAR, L.; BRUMMER, V.; LEŠTINSKÝ, P.: O-element 4R; Homogenizační zařízení s nástřikem kapaliny - O-element. laboratoře UPEI. (funkční vzorek)
Detail

DVOŘÁK, P.: Řídící ústředna pro shozové testy padákových záchranných systémů; Řídící ústředna pro shozové testy padákových záchranných systémů. C3a, 3.07. URL: http://www.lu.fme.vutbr.cz/wp-content/uploads/2016/12/FunkcniVzorekTriggerDAQ0v1.pdf. (funkční vzorek)
Detail

DVOŘÁK, P.; HÁJEK, T.; PEJCHAR, J.: VUT713; Bezpilotní systém VUT 713. C3A/3.07. URL: http://www.lu.fme.vutbr.cz/wp-content/uploads/2016/12/FunkcniVzorekVUT713b.pdf. (funkční vzorek)
Detail

ŠTĚTINA, J.; MAUDER, T.; KLIMEŠ, L.; KAVIČKA, F.: BRDSM; BRDSM: A complex dynamic system of quality management continuously cast steel. Technická 2, Brno A2/314. URL: http://www.continuouscasting.info/download. (software)
Detail

HUDÁK, I.; SKRYJA, P.; BĚLOHRADSKÝ, P.; STEHLÍK, P.: Směšovací stanice; Směšovací stanice pro přípravu nízko-výhřevných paliv. ÚPI FSI VUT v Brně - Zkušebna hořáků. (funkční vzorek)
Detail

PECH, O.; CALETKA, P.; JEDELSKÝ, J.; JÍCHA, M.: Optimalizovaná výustka pro distribuci vzduchu; Optimalizovaná výustka pro distribuci vzduchu. Fakulta strojního inženýrství VUT v Brně Technická 2896/2 Brno 616 69 místnost C3/213c. URL: http://www.energetickeforum.cz/fsi-vut-v-brne/vysledky-vyzkumu. (funkční vzorek)
Detail

POKORNÝ, J.; FIŠER, J.; KOPEČKOVÁ, B.; FOJTLÍN, M.; TOMA, R.; JÍCHA, M.: RTCS; Software pro real-time predikci tepelné zátěže kabiny a komfortu posádky. Budova D5, místnost 109, areál FSI, VUT v Brně. URL: http://www.energetickeforum.cz/fsi-vut-v-brne/vysledky-vyzkumu. (software)
Detail

JIRSOVÁ, M., HAMRLE, V., PEŠEK, J., VANĚK, O., HAVLÍK, P.; KOUŘIL, J.; DLOUHÝ, I.: HCKD-O-18-01; Ověření technologie výroby oběžného kola svařeného elektronovým paprskem. Howden ČKD Compressors s.r.o.. (ověřená technologie)
Detail

HAVLÍK, P.; FORET, R., JIRSOVÁ, M., HAMRLE, V., PEŠEK, J.: HCKD-FV-18-02; Oběžné kolo svařené elektronovým paprskem z materiálu Ti6Al4V (Grade 5). Howden ČKD Compressors s.r.o.. (funkční vzorek)
Detail

JIRSOVÁ, M., HAMRLE, V., PEŠEK, J., VANĚK, O., HAVLÍK, P., DLOUHÝ, I.: HCKD-FV-18-01; Oběžné kolo svařené elektronovým paprskem z materiálu X5CrNiCuNb16-4. Howden ČKD Compressors s.r.o.. (funkční vzorek)
Detail

NOVOTNÝ, P.: XLI. International Scientific Conference of Czech and Slovak University Departments and Institutions dealing with the research of combustion engines. Liberec (06.09.2010)
Detail

ČÍŽEK, J.: International Thermal Spray Conference 2014. Barcelona (21.05.2014)
Detail

PÍŠKA, M.: Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU Ostrava. Ostrava (03.09.2014)
Detail

NOVOTNÝ, P.: XLV. INTERNATIONAL SCIENTIFIC CONFERENCE OF THE CZECH AND SLOVAK UNIVERSITY DEPARTMENTS AND INSTITUTIONS DEALING WITH THE RESEARCH OF INTERNAL COMBUSTION ENGINES. Kostelec nad Černými lesy (10.09.2014)
Detail

STRECKER, Z.; MAZŮREK I.; ROUPEC, J.: 14th International Conference on Electrorheological Fluids and Magnetorheological Suspensions. Granada (07.07.2014)
Detail

VLAŠIC, F.; MAZAL, P.: 44. mezinárodní konference NDE for Safety 2014 / Defektoskopie 2014. Praha (09.10.2014)
Detail

HADAŠ, Z.; KREJSA, J.; KOVÁŘ, J.; ANDRŠ, O.; BŘEZINA, T.: 16th International Conference on Mechatronics - Mechatronika 2014. Brno (03.12.2014)
Detail

MATLÁK, J.: Využití laserů v průmyslu 2015. Plzeň (16.03.2015)
Detail

KOUŘIL, M.; MATLÁK, J.: Chemicko tepelné zpracování kovových povrchů. Jihlava (24.11.2015)
Detail

BĚLOHRADSKÝ, P.: 62. konference chemického a procesního inženýrství. Jezerka (09.11.2015)
Detail

STEHLÍK, P.; VESELÝ, M.; SVĚRÁK, T.; DZIK, P.; MÁŠA, V.; ŠOMPLÁK, R.; NEVRLÝ, V.; KALIVODA, J.: 64. konference chemického a procesního inženýrství CHISA 2017. Seč (23.10.2017)
Detail

PÍŠKA, M.: Mazání v moderním průmyslovém podniku. Hotel SKI Nové Město na Moravě (25.04.2018)
Detail

DRÁPAL, L.; NOVOTNÝ, P.: KOKA 2018. Nitrianské Rudno (19.09.2018)
Detail

ŘEHÁK, K.; DRÁPAL, L.: 33rd International Conference on VIBROENGINEERING (2018). Zittau (24.09.2018)
Detail

POPELA, R.; JURAČKA, J.; NAVRÁTIL, J.; JANHUBA, L.: 13th Research and Education in Aircraft Design Conference. Brno (07.11.2018)
Detail