Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail projektu
Období řešení: 01.01.2016 — 31.12.2019
Zdroje financování
Ministerstvo školství, mládeže a tělovýchovy ČR - Posílení výzkumu na vysokých školách
- plně financující (2016-01-01 - 2019-12-31)
O projektu
Výzkumná infrastruktura (VI) CEITEC Nano zajisťuje komplexní vybavení a odborné zázemí pro experimentální výzkum v oblasti nanotechnologií a nanověd.
Popis anglickyThe research infrastructure CEITEC Nano (hereinafter RI) provides complex facilities and expertise for the experimental research in the field of nanotechnology and nanoscience. The main goal of RI CEITEC Nano is to run complex RI for advanced research in the nanoscience based on the open access principle. The targeted research areas include physics and chemistry of low dimensional systems, nanoelectronics, nanophotonics, material science including condensed matter physics, chemistry and surface science, biochemistry, bioengineering and biomedicine, and engineering. The objective of RI CEITEC Nano is to provide “open” and “self-service” access in the one-site integrated clean-room facilities equipped with a complete set of tools for preparation and characterization of functional nanostructures and advanced materials to both the academic and industrial users. High standard service like friendly access RI, perfect support and service to all RI users, keeping instruments in perfect conditions are the key aspect of RI CEITEC Nano. The RI strategy is pointed at participation in the national or international partnerships and networks of research infrastructures (EUMINAfab, EuroNanoLab). The RI naturally follows the National priorities for oriented research, experimental development and innovations. The most relevant priority area is “Sustainability of energetics and material resources”, R&D targets “Advanced materials for the competitiveness, innovation and sustainability of the classical materials and use of the nanomaterials and nanotechnologies”. The other priority area followed by the RI is also “Competitive knowledge-based economy”, subareas “Application of new findings from the area of “General Purpose Technologies” and “Strengthening of sustainability of production and other economic activities”.
Klíčová slovaVýzkumná infrastruktura
Klíčová slova anglickynanotechnology, core facilities, CEITEC, BUT
Označení
LM2015041
Originální jazyk
čeština
Řešitelé
Urbánek Michal, Ing., Ph.D. - hlavní řešitel
Útvary
Středoevropský technologický institut VUT- spolupříjemce (01.01.2016 - 31.12.2019)Centrální laboratoř Biofotonika- spolupříjemce (01.01.2016 - 31.12.2019)Sdílená laboratoř RP1- příjemce (01.01.2016 - 31.12.2019)
Výsledky
MOHAN, R.; DRBOHLAVOVÁ, J.; HUBÁLEK, J. Dual band emission in carbon dots. Chemical Physics Letters, 2018, vol. 692, no. 196–201, p. 196-201. ISSN: 0009-2614.Detail
KOLÍBAL, M.; PEJCHAL, T.; VYSTAVĚL, T.; ŠIKOLA, T. The Synergic Effect of Atomic Hydrogen Adsorption and Catalyst Spreading on Ge Nanowire Growth Orientation and Kinking. NANO LETTERS, 2016, vol. 16, no. 8, p. 4880-4886. ISSN: 1530-6984.Detail
CHMELA, O.; SADÍLEK, J.; VALLEJOS VARGAS, S.; HUBÁLEK, J. Microelectrode array systems for their use in single nanowire-based gas sensor platforms. Journal of Electrical Engineering, 2017, vol. 68, no. 2, p. 158-162. ISSN: 1335-3632.Detail
UHLÍŘ, V.; ARREGI URIBEETXEBARRIA, J.; FULLERTON, E. Colossal magnetic phase transition asymmetry in mesoscale FeRh stripes. NATURE COMMUNICATIONS, 2016, vol. 7, no. 1, p. 1-7. ISSN: 2041-1723.Detail
BABOCKÝ, J.; KŘÍŽOVÁ, A.; ŠTRBKOVÁ, L.; KEJÍK, L.; LIGMAJER, F.; HRTOŇ, M.; DVOŘÁK, P.; TÝČ, M.; ČOLLÁKOVÁ, J.; KŘÁPEK, V.; KALOUSEK, R.; CHMELÍK, R.; ŠIKOLA, T. Quantitative 3D phase imaging of plasmonic metasurfaces. ACS Photonics, 2017, vol. 4, no. 6, p. 1389-1397. ISSN: 2330-4022.Detail
DVOŘÁK, P.; ÉDES, Z.; KVAPIL, M.; ŠAMOŘIL, T.; LIGMAJER, F.; HRTOŇ, M.; KALOUSEK, R.; KŘÁPEK, V.; DUB, P.; SPOUSTA, J.; VARGA, P.; ŠIKOLA, T. Imaging of near-field interference patterns by a-SNOM – influence of illumination wavelength and polarization state. OPTICS EXPRESS, 2017, vol. 25, no. 14, p. 16560-16573. ISSN: 1094-4087.Detail
CHMELA, O.; SADÍLEK, J.; SAMÀ, J.; ROMANO-RODRIGUEZ, A.; VALLEJOS VARGAS, S.; HUBÁLEK, J. Nanosensor array systems based on single functional wires selectively integrated and their sensing properties to C2H6O and NO2. In Proc. SPIE 10248, Nanotechnology VIII. Proceedings of SPIE. Volume 10248. Barcelona, Spain: SPIE Nanotechnology VIII, 2017. p. 1-7. ISBN: 9781510609976. ISSN: 0277-786X.Detail
JIANG, L.; XIAO, N.; WANG, B.; GRUSTAN-GUTIERREZ, E.; JING, X.; BÁBOR, P.; KOLÍBAL, M.; LU, G.; WU, T.; WANG, H.; HUI, F.; SHI, Y.; SONG, B.; XIE, X.; LANZA, M. High-resolution characterization of hexagonal boron nitride coatings exposed to aqueous and air oxidative environments. Nano Research, 2017, vol. 10, no. 6, p. 2046-2055. ISSN: 1998-0000.Detail
POŘÍZKA, P.; KASKI, S.; HRDLIČKA, A.; MODLITBOVÁ, P.; SLÁDKOVÁ, L.; HÄKKÄNEN, H.; PROCHAZKA, D..; NOVOTNÝ, J.; GADAS, P.; ČELKO, L.; NOVOTNÝ, K.; KAISER, J. Detection of fluorine using laser-induced breakdown spectroscopy and Raman spectroscopy. Journal of Analytical Atomic Spectrometry, 2017, vol. 32, no. 10, p. 1966-1974. ISSN: 1364-5544.Detail
VAŇATKA, M.; URBÁNEK, M.; JÍRA, R.; FLAJŠMAN, L.; DHANKHAR, M.; IM, M.; MICHALIČKA, J.; UHLÍŘ, V.; ŠIKOLA, T. Magnetic vortex nucleation modes in static magnetic fields. AIP Advances, 2017, vol. 7, no. 10, p. 1-8. ISSN: 2158-3226.Detail
PODEŠVA, P.; GABLECH, I.; NEUŽIL, P. Nanostructured Gold Microelectrode Array for Ultrasensitive Detection of Heavy Metal Contamination. Analytical Chemistry, 2018, vol. 90, no. 2, p. 1161-1167. ISSN: 1520-6882.Detail
MANAKHOV, A.; KIRYUKHANTSEV-KORNEEV, P.; MICHLÍČEK, M.; PERMYAKOVA, E.; DVOŘÁKOVÁ, E.; POLČÁK, J.; POPOV, Z.; VISOTIN, M.; SHTANSKY, D. Grafting of carboxyl groups using CO2/C2H4/Ar pulsed plasma: Theoretical modeling and XPS derivatization. Applied Surface Science, 2018, vol. 435, no. 1, p. 1220-1227. ISSN: 0169-4332.Detail
KORMOŠ, L.; PROCHÁZKA, P.; ŠIKOLA, T.; ČECHAL, J. Molecular Passivation of Substrate Step Edges as Origin of Unusual Growth Behavior of 4,4′-Biphenyl Dicarboxylic Acid on Cu(001). Journal of Physical Chemistry C (print), 2018, vol. 2018, no. 122, p. 2815-2820. ISSN: 1932-7447.Detail
SVATOŠ, V.; SUN, W.; KALOUSEK, R.; GABLECH, I.; PEKÁREK, J.; NEUŽIL, P. Single Measurement Determination of Mechanical, Electrical, and Surface Properties of a Single Carbon Nanotube via Force Microscopy. Sensors and Actuators, 2018, vol. 271, no. NA, p. 217-222. ISSN: 0924-4247.Detail
ZIKMUND, T.; NOVOTNÁ, M.; KAVKOVÁ, M.; TESAŘOVÁ, M.; KAUCKÁ, M.; SZAROWSKÁ, B.; ADAMEYKO, I.; HRUBÁ, E.; BUCHTOVÁ, M.; DRAŽANOVÁ, E.; STARČUK, Z.; KAISER, J. High-contrast differentiation resolution 3D imaging of rodent brain by X-ray computed microtomography. Journal of Instrumentation, 2018, vol. 13, no. 2, p. 1-12. ISSN: 1748-0221.Detail
HOJNÁ, A.; MICHALIČKA, J.; HADRABA, H.; DI GABRIELE, F.; DUCHOŇ, J.; ROZUMOVÁ, L.; HUSÁK, R. Fracture Resistance of 14Cr ODS Steel Exposed to a High Temperature Gas. Metals, 2017, vol. 7, no. 12, p. 560-1 (560-17 p.)ISSN: 2075-4701.Detail
SOPHA, H.; ŠAMOŘIL, T.; PÁLESCH, E.; HROMÁDKO, L.; ZAZPE, R.; ŠKODA, D.; URBÁNEK, M.; NG, S.; PŘIKRYL, J.; MACÁK, J. Ideally Hexagonally Ordered TiO2 Nanotube Arrays. ChemistryOpen, 2017, vol. 6, no. 4, p. 480-483. ISSN: 2191-1363.Detail
Xiao, N.;Villena, M.A.; Yuan, B.; Chen, S.; Wang, B.; Eliáš, M.; Shi, Y.; Hui, F.; Jing, X.; Scheuermann, A.; Tang, K.; McIntyre, P.C. Resistive Random Access Memory Cells with a Bilayer TiO2/SiOX Insulating Stack for Simultaneous Filamentary and Distributed Resistive Switching. ADVANCED FUNCTIONAL MATERIALS, 2017, vol. 27, no. 33, p. 859-865. ISSN: 1616-301X.Detail
HADRABA, H.; HUSÁK, R.; STRATIL, L.; ŠIŠKA, F.; CHLUP, Z.; PUCHÝ, V.; MICHALIČKA, J. Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications. FUSION ENGINEERING AND DESIGN, 2017, vol. 124, no. 1, p. 1028-1032. ISSN: 0920-3796.Detail
Michalička, J.;Jiao, Z.; Was, G. Radiation-induced precipitates in a self-ion irradiated cold-worked 316 austenitic stainless steel used for PWR baffle-bolts. In Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. Springer, 2018. p. 565-580. ISBN: 978-3-319-67244-1.Detail
ARREGI URIBEETXEBARRIA, J.; HORKÝ, M.; FABIANOVÁ, K.; TOLLEY, R.; FULLERTON, E.; UHLÍŘ, V. Magnetization reversal and confinement effects across the metamagnetic phase transition in mesoscale FeRh structures. Journal of Physics D - Applied Physics, 2018, vol. 51, no. 10, p. 1-12. ISSN: 1361-6463.Detail
ŠIK, O.; BÁBOR, P.; POLČÁK, J.; BELAS, E.; MORAVEC, P.; GRMELA, L.; STANĚK, J. Low Energy Ion Scattering as a depth profiling tool for thin layers - Case of bromine Methanol etched CdTe. Vacuum, 2018, no. 152, p. 138-144. ISSN: 0042-207X.Detail
ŠIK, O.; ŠKVARENINA, Ľ.; CAHA, O.; MORAVEC, P.; ŠKARVADA, P.; BELAS, E.; GRMELA, L. Determining the sub-surface damage of CdTe single crystals after lapping. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2018, vol. 29, no. 11, p. 9652-9662. ISSN: 0957-4522.Detail
MOURALOVÁ, K.; KLAKURKOVÁ, L.; MATOUŠEK, R.; PROKEŠ, T.; HRDÝ, R.; KAŇA, V. Influence of the Cut Direction through the Semi-Finished Product on the Occurrence of Cracks for X210Cr12 Steel Using WEDM. ARCH CIV MECH ENG, 2018, vol. 18, no. 4, p. 1318-1331. ISSN: 1644-9665.Detail
KRBAL, M.; PŘIKRYL, J.; ZAZPE, R.; DVOŘÁK, F.; BUREŠ, F.; MACÁK, J. 2D MoSe2 Structures Prepared by Atomic Layer Deposition. Physica Status Solidi-Rapid Research Letters, 2018, vol. 12, no. 5, p. 1800023-1 (1800023-4 p.)ISSN: 1862-6254.Detail
SOPHA, H.; TESAŘ, K.; KNOTEK, P.; JÄGER, A.; HROMÁDKO, L.; MACÁK, J. TiO2 nanotubes grown on Ti substrates with different microstructure. MATERIALS RESEARCH BULLETIN, 2018, vol. 103, no. 1, p. 197-204. ISSN: 1873-4227.Detail
KOLÍBAL, M.; PEJCHAL, T.; MUSÁLEK, T.; ŠIKOLA, T. Catalyst–substrate interaction and growth delay in vapor–liquid–solid nanowire growth. NANOTECHNOLOGY, 2018, vol. 29, no. 20, p. 1-7. ISSN: 0957-4484.Detail
SVATOŠ, V.; GABLECH, I.; ILIC, B; PEKÁREK, J.; NEUŽIL, P. In situ observation of carbon nanotube layer growth on microbolometers with substrates at ambient temperature. Journal of Applied Physics, 2018, vol. 123, no. 11, p. 0-0. ISSN: 1089-7550.Detail
CHMELA, O.; SADÍLEK, J.; SAMÀ, DOMÈNECH-GIL, G.; J.; SOMER, J.; MOHAN, R.; ROMANO-RODRIGUEZ, A.; HUBÁLEK, J.; VALLEJOS VARGAS, S. Selectively arranged single-wire based nanosensor array systems for gas monitoring. Nanoscale, 2018, vol. 10, no. 19, p. 9087-9096. ISSN: 2040-3372.Detail
KALASOVÁ, D.; DVOŘÁK, K.; SLOBODNÍK, M.; VŠIANSKÝ, D.; ZIKMUND, T.; DLUHOŠ, J.; VÁŇA, R.; BUREŠ, J.; KAISER, J. Characterization of inner structure of limestone by X-ray computed sub-micron tomography. CONSTRUCTION AND BUILDING MATERIALS, 2018, vol. 174, no. 1, p. 693-700. ISSN: 1879-0526.Detail
MOZALEV, A.; BENDOVÁ, M.; GISPERT-GUIRADO, F.; LLOBET, E. Hafnium-Oxide 3-D Nanofilms via the Anodizing of Al/Hf Metal Layers. CHEMISTRY OF MATERIALS, 2018, vol. 30, no. 8, p. 2694-2708. ISSN: 0897-4756.Detail
KONEČNÝ, M.; BARTOŠÍK, M.; MACH, J.; ŠVARC, V.; NEZVAL, D.; PIASTEK, J.; PROCHÁZKA, P.; CAHLÍK, A.; ŠIKOLA, T. Kelvin Probe Force Microscopy and Calculation of Charge Transport in a Graphene/Silicon Dioxide System at Different Relative Humidity. ACS APPL MATER INTER, 2018, vol. 10, no. 14, p. 11987-11994. ISSN: 1944-8244.Detail
REDONDO, J.; TELYCHKO, M.; PROCHÁZKA, P.; KONEČNÝ, M.; BERGER, J.; VONDRÁČEK, M.; ČECHAL, J.; JELÍNEK, P.; ŠVEC, M. Simple device for the growth of micrometer-sized monocrystalline single-layer graphene on SiC(0001). JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2018, vol. 36, no. 3, p. 031401-1 (031401-6 p.)ISSN: 1520-8559.Detail
PRESSACCO, F.; UHLÍŘ, V.; GATTI, M.; NICOLAOU, A.; BENDOUNAN, A.; ARREGI URIBEETXEBARRIA, J.; PATEL, S.; FULLERTON, E.; KRIZMANCIC, D.; SIROTTI, F. Laser induced phase transition in epitaxial FeRh layers studied by pump-probe valence band photoemission. Structural Dynamics, 2018, vol. 5, no. 3, p. 034501-1 (034501-11 p.)ISSN: 2329-7778.Detail
TALU, S.; YADAV, R.; ŠIK, O.; SOBOLA, D.; DALLAEV, R.; SOLAYMANI, S.; MAN, O. How topographical surface parameters are correlated with CdTe monocrystal surface oxidation. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2018, no. 85, p. 15-23. ISSN: 1369-8001.Detail
SLÁDEK, V.; SABOLOVÁ, V.; ŠEBESTA, O.; ZIKMUND, T.; KAISER, J.; ČEREVKOVÁ, S. Effect of deriving periosteal and endosteal contours from microCT scans on computation of cross-sectional properties in non-adults: the femur. Journal of Anatomy, 2018, vol. 233, no. 3, p. 1-13. ISSN: 1469-7580.Detail
NEUGEBAUER, P.; BLOOS, D.; MARX, R.; LUTZ, P.; KERN, M.; AGUILÀ, D.; VAVERKA, J.; LAGUTA, O.; DIETRICH, C.; CLÉRAC, R.; VAN SLAGEREN, J. Ultra-broadband EPR spectroscopy in field and frequency domains. Physical Chemistry Chemical Physics, 2018, vol. 20, no. 15528, p. 15528-15534. ISSN: 1463-9084.Detail
HORÁK, M.; BUKVIŠOVÁ, K.; ŠVARC, V.; JASKOWIEC, J.; KŘÁPEK, V.; ŠIKOLA, T. Comparative study of plasmonic antennas fabricated by electron beam and focused ion beam lithography. Scientific Reports, 2018, vol. 8, no. 1, p. 9640-9648. ISSN: 2045-2322.Detail
BENDOVÁ, M.; KOLÁŘ, J.; MÁRIK, M.; LEDNICKÝ, T.; MOZALEV, A. Influence of nitrogen species on the porous-alumina-assisted growth of TiO2 nanocolumn arrays. Electrochimica Acta, 2018, vol. 281, no. 1, p. 796-809. ISSN: 0013-4686.Detail
KAUCKA, M.; PETERSEN, J.; TESAŘOVÁ, M.; SZAROWSKA, B.; KASTRITI, ME.; XIE, M.; KICHEVA, A.; ANNUSVER, K.; PAN, L.; SPITZ, F.; KAISER, J.; HOVORAKOVA, M.; ZIKMUND, T.; SUNADOME, K.; MATISE, MP.; WANG, H.; MARKLUND, U.; ABDO, H.; ERNFORS, P.; MAIRE, P.; WURMSER, M.; CHAGIN, AS.; FRIED, K.; ADAMEYKO, I. Signals from the brain and olfactory epithelium control shaping of the mammalian nasal capsule cartilage. eLife, 2018, vol. 7, no. 1, p. e34465 (e34465 p.)ISSN: 2050-084X.Detail
PRAJZLER, V.; SALAMON, D.; MACA, K. Pressure-less rapid rate sintering of pre-sintered alumina and zirconia ceramics. CERAMICS INTERNATIONAL, 2018, vol. 44, no. 9, p. 10840-10846. ISSN: 1873-3956.Detail
GABLECH, I.; SOMER, J.; FOHLEROVÁ, Z.; SVATOŠ, V.; PEKÁREK, J.; KURDÍK, S.; FENG, J.; FECKO, P.; PODEŠVA, P.; HUBÁLEK, J.; NEUŽIL, P. Fabrication of buried microfluidic channels with observation windows using femtosecond laser photoablation and parylene-C coating. Microfluidics and Nanofluidics, 2018, vol. 22, no. 9, p. 1-7. ISSN: 1613-4990.Detail
MORAVČÍK, I.; DE ALMEIDA GOUVÊA, L.; HORNÍK, V.; KOVACOVA, Z.; KITZMANTEL, E.; NEUBAUER, E.; DLOUHÝ, I. Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy. SCRIPTA MATERIALIA, 2018, vol. 157, no. 1, p. 24-29. ISSN: 1359-6462.Detail
MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; HRABEC, P.; PROKEŠ, T.; MATOUŠEK, R.; FIALA, Z. Quality of Surface and Subsurface Layers after WEDM Aluminum Alloy 7475-T7351 Including Analysis of TEM Lamella. International Journal of Advanced Manufacturing Technology, 2018, vol. 99, no. 9, p. 2309-2326. ISSN: 1433-3015.Detail
ROČŇÁKOVÁ, I.; SLÁMEČKA, K.; MONTUFAR JIMENEZ, E.; REMEŠOVÁ, M.; DYČKOVÁ, L.; BŘÍNEK, A.; JECH, D.; DVOŘÁK, K.; ČELKO, L.; KAISER, J. Deposition of Hydroxyapatite and Tricalcium Phosphate Coatings by Suspension Plasma Spraying: Effects of Torch Speed. Journal of the European Ceramic Society, 2018, vol. 38, no. 16, p. 5489-5496. ISSN: 0955-2219.Detail
JIAO, Z.; MICHALIČKA, J.; WAS, G. Self-ion emulation of high dose neutron irradiated microstructure in stainless steels. JOURNAL OF NUCLEAR MATERIALS, 2018, vol. 501, no. 1, p. 312-318. ISSN: 0022-3115.Detail
TALU, S.; MOROZOV, I.; SOBOLA, D.; ŠKARVADA, P. Multifractal Characterization of Butterfly Wings Scales. BULLETIN OF MATHEMATICAL BIOLOGY, 2018, vol. 80, no. 11, p. 2856-2870. ISSN: 0092-8240.Detail
ŢĂLU, Ş.; SOBOLA, D.; PAPEŽ, N.; DALLAEV, R.; SEDLÁK, P. Efficient processing of data acquired using microscopy techniques. In DEStech Transactions on Social Science, Education and Human Science. DEStech Transactions on Social Science Education and Human Science. Lancaster, Pennsylvania 17602 U.S.A.: DEStech Publications, Inc., 2018. p. 202-207. ISBN: 978-1-60595-566-7. ISSN: 2475-0042.Detail
BANNOV, A.; MANAKHOV, A.; SHIBAEV, A.; UKHINA, A.; POLČÁK, J.; MAKSIMOVSKII, E. Synthesis Dynamics of Graphite Oxide. Thermochimica Acta, 2018, vol. 663, no. 1, p. 165-175. ISSN: 0040-6031.Detail
PERMYAKOVA, E.; POLČÁK, J.; SLUKIN, P.; IGNATOV, S.; GLOUSHANKOVA, N.; ZAJÍČKOVÁ, L.; SHTANSKY, D.; MANAKHOV, A. Antibacterial biocompatible PCL nanofibers modified by COOH-anhydride plasma polymers and gentamicin immobilization. Materials and design, 2018, vol. 153, no. 1, p. 60-70. ISSN: 0261-3069.Detail
PONOMAREV, V.; SUKHORUKOVA, I.; SHEVEYKO, A.; PERMYAKOVA, E.; MANAKHOV, A.; IGNATOV, S.; GLOUSHANKOVA, N.; ZHITNYAK, I.; LEBEDEV, O.; POLČÁK, J.; KOZMIN, A.; SHTANSKY, D. Antibacterial Performance of TiCaPCON Films Incorporated with Ag, Pt, and Zn: Bactericidal Ions Versus Surface Microgalvanic Interactions. ACS APPL MATER INTER, 2018, vol. 10, no. 29, p. 24406-24420. ISSN: 1944-8244.Detail
MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; HRABEC, P.; PROKEŠ, T.; HRDÝ, R. Analysis of cut orientation through half-finished product using WEDM. Materials and Manufacturing Processes, 2018, vol. 33, no. 16, p. 1-11. ISSN: 1532-2475.Detail
MOURALOVÁ, K.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; MATOUŠEK, R.; HRABEC, P.; FIŠEROVÁ, Z.; OTOUPALÍK, J. Using a Design of Experiment for a Comprehensive Analysis of the Surface Quality and Cutting Speed in WED-Machined Hadfield Steel. Journal of Mechanical Science and Technology, 2019, vol. 33, no. 5, p. 2371-2386. ISSN: 1976-3824.Detail
STARÁ, V.; PROCHÁZKA, P.; MAREČEK, D.; ŠIKOLA, T.; ČECHAL, J. Ambipolar remote graphene doping by low-energy electron beam irradiation. Nanoscale, 2018, vol. 10, no. 37, p. 17520-17524. ISSN: 2040-3372.Detail
DRDLÍK, D.; ROLEČEK, J.; DRDLÍKOVÁ, K.; SALAMON, D. Restraining of calcium contamination in near-net shape alumina ceramics during slip casting. International Journal of Applied Ceramic Technology, 2018, vol. 15, no. 6, p. 1559-1566. ISSN: 1744-7402.Detail
DHANKHAR, M.; VAŇATKA, M.; URBÁNEK, M. Fabrication of Magnetic Nanostructures on Silicon Nitride Membranes for Magnetic Vortex Studies Using Transmission Microscopy Techniques. Journal of visualized experiments : JoVE, 2018, vol. 137, no. 1, p. 1-7. ISSN: 1940-087X.Detail
LIGMAJER, F.; KEJÍK, L.; TIWARI, U.; QIU, M.; NAG, J.; KONEČNÝ, M.; ŠIKOLA, T.; JIN, W.; HAGLUND, R.; APPAVOO, K.; LEI, D. Epitaxial VO2 nanostructures: A route to large-scale, switchable dielectric metasurfaces. ACS Photonics, 2018, vol. 5, no. 7, p. 2561-2567. ISSN: 2330-4022.Detail
FAßBENDER, A.; BABOCKÝ, J.; DVOŘÁK, P.; KŘÁPEK, V.; VAN DER LINDEN, S. Invited Article: Direct phase mapping of broadband Laguerre-Gaussian metasurfaces. APL Photonics, 2018, vol. 3, no. 11, p. 110803-1 (110803-7 p.)ISSN: 2378-0967.Detail
SOPHA, H.; SPOTZ, Z.; MICHALIČKA, J.; HROMÁDKO, L.; BULÁNEK, R.; WÁGNER, T.; MACÁK, J. Bismuth Oxychloride Nanoplatelets by Breakdown Anodization. ChemElectroChem, 2019, vol. 6, no. 2, p. 336-341. ISSN: 2196-0216.Detail
ŠŤASTNÝ, P.; TRUNEC, M.; MAN, O.; LUKÁŠOVÁ, V.; SEDLÁČEK, R. Strength degradation, phase and morphological changes of calcium phosphate scaffolds in acidic environment simulating osteoclastic activity. 2018. p. 625-625.Detail
DVOŘÁK, P.; KVAPIL, M.; BOUCHAL, P.; ÉDES, Z.; ŠAMOŘIL, T.; HRTOŇ, M.; LIGMAJER, F.; KŘÁPEK, V.; ŠIKOLA, T. Near-field digital holography: a tool for plasmon phase imaging. Nanoscale, 2018, vol. 10, no. 45, p. 21363-21368. ISSN: 2040-3372.Detail
BENDOVÁ, M.; KOLÁŘ, J.; GISPERT-GUIRADO, F.; MOZALEV, A. Porous‐Alumina‐Assisted Growth of Nanostructured Anodic Films on Ti−Nb Alloys. ChemElectroChem, 2018, vol. 5, no. 19, p. 2825-2835. ISSN: 2196-0216.Detail
DRDLÍK, D.; MAŘÁK, V.; ROLEČEK, J.; DRDLÍKOVÁ, K.; KRATOCHVÍL, J.; SALAMON, D. Study of Alumina and Alumina-Silicon Carbide Layered Composites Sintered by SPS. Key Engineering Materials (print), 2018, vol. 784, no. 1, p. 67-72. ISSN: 1013-9826.Detail
MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L. Surface and subsurface layers defects analysis after WEDM affecting the subsequent lifetime of produced components. Arabian Journal for Science and Engineering, 2019, vol. 44, no. 9, p. 7723-7735. ISSN: 2191-4281.Detail
BŘÍNEK, L.; KVAPIL, M.; ŠAMOŘIL, T.; HRTOŇ, M.; KALOUSEK, R.; KŘÁPEK, V.; SPOUSTA, J.; DUB, P.; VARGA, P.; ŠIKOLA, T. Plasmon Resonances of Mid-IR Antennas on Absorbing Substrate: Optimization of Localized Plasmon-Enhanced Absorption upon Strong Coupling Effect. ACS Photonics, 2018, vol. 5, no. 11, p. 4378-4385. ISSN: 2330-4022.Detail
SKOPALÍK, J.; SLAVÍK, J.; ČMIEL, V.; POLÁKOVÁ, K.; PRŮCHA, J.; GABRIELOVÁ, E.; BAIAZITOVA, L.; SVOBODA, O.; PROVAZNÍK, I. Comparison of PDMS Microtopographical Plates and Planar Nanofiber Scaffolds for In Vitro Cultivation of Cardiac Cells. In Nanocon 2018 - Abstracts. 1. Brno, Czech Republic: 2019. p. 442-447. ISBN: 978-80-87294-85-7.Detail
TOMIC, M.; ŠETKA, M.; CHMELA, O.; GRACIA, I.; FIGUERAS, E.; CANÉ, C.; VALLEJOS VARGAS, S. Cerium Oxide-Tungsten Oxide Core-Shell Nanowire-Based Microsensors Sensitive to Acetone. Biosensors, 2018, vol. 8, no. 4, p. 1-12. ISSN: 2079-6374.Detail
ROLEČEK, J.; PEJCHALOVÁ, L.; MARTÍNEZ-VÁZQUEZ, F.; MIRANDA GONZÁLEZ, P.; SALAMON, D. Bioceramic scaffolds fabrication: indirect 3D printing combined with ice-templating vs. robocasting. Journal of the European Ceramic Society, 2019, vol. 39, no. 4, p. 1595-1602. ISSN: 0955-2219.Detail
NOVOTNÁ, L.; KUČERA, L.; HAMPL, A.; DRDLÍK, D.; CIHLÁŘ, J.; CIHLÁŘ, J. Biphasic calcium phosphate scaffolds with controlled pore size distribution prepared by in-situ foaming. Materials Science and Engineering C-Materials for Biological Applications, 2019, vol. 95, no. 1, p. 363-370. ISSN: 0928-4931.Detail
PONOMAREV, V.; SHEVEYKO, A.; SUKHORUKOVA, I.; SHVINDINA, N.; MANAKHOV, A.; ZHITNYAK, I.; GLOUSHANKOVA, N.; FURSOVA, N.; IGNATOV, S.; PERMYAKOVA, E.; POLČÁK, J.; SHTANSKY, D. Microstructure, chemical and biological performance of boron-modified TiCaPCON films. Applied Surface Science, 2019, vol. 465, no. 1, p. 486-497. ISSN: 0169-4332.Detail
HOLEŇÁK, R.; SPUSTA, T.; POTOČEK, M.; SALAMON, D.; ŠIKOLA, T.; BÁBOR, P. 3D localization of spinel (MgAl2O4) and sodium contamination in alumina by TOF-SIMS. MATERIALS CHARACTERIZATION, 2019, vol. 148, no. 1, p. 252-258. ISSN: 1044-5803.Detail
ŠŤASTNÁ, E.; ČÁSTKOVÁ, K. Electrospinning and biocompatibility of polymer-ceramic nanofibers for tissue engineering. In 10TH ANNIVERSARY INTERNATIONAL CONFERENCE ON NANOMATERIALS - RESEARCH & APPLICATION (NANOCON 2018 (R)). 2019. p. 472-476. ISBN: 978-80-87294-89-5.Detail
MOZALEV, A.; HUBÁLEK, J. On-substrate porous-anodic-alumina-assisted gold nanostructure arrays: Meeting the challenges of various sizes and interfaces. ELECTROCHIMICA ACTA, 2019, vol. 297, no. -, p. 988-999. ISSN: 1873-3859.Detail
KAUSHIK, P.; ELIÁŠ, M.; PRÁŠEK, J.; PYTLÍČEK, Z.; ZAJÍČKOVÁ, L. Titanium Dioxide Modified Multi-Walled Carbon Nanotubes as Room Temperature NH3 Gas Sensors. In IEEE Sensors 2018 Proceeedings. Electronics Technology (ISSE). India: IEEE Computer Society, 2018. p. 1-3. ISBN: 978-1-5386-4707-3. ISSN: 2161-2528.Detail
DALLAEV, R.; STACH, S.; TALU, S.; SOBOLA, D.; MÉNDEZ-ALBORES, A.; TREJO, G.; GRMELA, L. Stereometric Analysis of Effects of Heat Stressing on Micromorphology of Si Single Crystals. Silicon, 2019, vol. 11, no. 1, p. 1-15. ISSN: 1876-990X.Detail
URBÁNEK, M.; FLAJŠMAN, L.; KŘIŽÁKOVÁ, V.; GLOSS, J.; HORKÝ, M.; SCHMID, M.; VARGA, P. Research Update: Focused ion beam direct writing of magnetic patterns with controlled structural and magnetic properties. APL Materials, 2018, vol. 6, no. 6, p. 060701-1 (060701-7 p.)ISSN: 2166-532X.Detail
GLOSS, J.; HORKÝ, M.; KŘIŽÁKOVÁ, V.; FLAJŠMAN, L.; SCHMID, M.; URBÁNEK, M.; VARGA, P. The growth of metastable fcc Fe78Ni22 thin films on H-Si(100) substrates suitable for focused ion beam direct magnetic patterning. Applied Surface Science, 2019, vol. 469, no. 1, p. 747-752. ISSN: 0169-4332.Detail
FALLARINO, L.; OELSCHLÄGEL, A.; ARREGI URIBEETXEBARRIA, J.; BASHKATOV, A.; SAMAD, F.; BÖHM, B.; CHESNEL, K.; HELLWIG, O. Control of domain structure and magnetization reversal in thick Co/Pt multilayers. PHYSICAL REVIEW B, 2019, vol. 99, no. 2, p. 024431-1 (024431-16 p.)ISSN: 2469-9950.Detail
MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; OTOUPALÍK, J.; FIŠEROVÁ, Z.; FIALA, Z. Micro-milling machinability of pure molybdenum. International Journal of Advanced Manufacturing Technology, 2019, vol. 102, no. 9, p. 4153-4165. ISSN: 1433-3015.Detail
BIJALWAN, V.; TOFEL, P.; ERHART, J.; MACA, K. The complex evaluation of functional properties of nearly dense BCZT ceramics and their dependence on the grain size. Ceramics International, 2019, vol. 45, no. 1, p. 317-326. ISSN: 0272-8842.Detail
BOUCHAL, P.; DVOŘÁK, P.; BABOCKÝ, J.; BOUCHAL, Z.; LIGMAJER, F.; HRTOŇ, M.; KŘÁPEK, V.; FAßBENDER, A.; LINDEN, S.; CHMELÍK, R.; ŠIKOLA, T. High-Resolution Quantitative Phase Imaging of Plasmonic Metasurfaces with Sensitivity down to a Single Nanoantenna. NANO LETTERS, 2019, vol. 19, no. 2, p. 1242-1250. ISSN: 1530-6984.Detail
MODLITBOVÁ, P.; HLAVÁČEK, A.; ŠVESTKOVÁ, T.; POŘÍZKA, P.; ŠIMONÍKOVÁ, L.; NOVOTNÝ, K.; KAISER, J. The effects of photon-upconversion nanoparticles on the growth of radish and duckweed: Bioaccumulation, imaging, and spectroscopic studies. CHEMOSPHERE, 2019, vol. 225, no. 1, p. 723-734. ISSN: 0045-6535.Detail
HORÁK, M.; KŘÁPEK, V.; HRTOŇ, M.; KONEČNÁ, A.; LIGMAJER, F.; STÖGER-POLLACH, M.; ŠAMOŘIL, T.; PATÁK, A.; ÉDES, Z.; METELKA, O.; BABOCKÝ, J.; ŠIKOLA, T. Limits of Babinet’s principle for solid and hollow plasmonic antennas. Scientific Reports, 2019, vol. 9, no. 1, p. 1-11. ISSN: 2045-2322.Detail
STÖGER-POLLACH, M.; BUKVIŠOVÁ, K.; SCHWARZ, S.; KVAPIL, M.; ŠAMOŘIL, T.; HORÁK, M. Fundamentals of cathodoluminescence in a STEM: The impact of sample geometry and electron beam energy on light emission of semiconductors. Ultramicroscopy, 2019, vol. 200, no. 1, p. 111-124. ISSN: 0304-3991.Detail
NG, S.; SOPHA, H.; ZAZPE MENDIOROZ, R.; SPOTZ, Z.; BIJALWAN, V.; DVOŘÁK, F.; HROMÁDKO, L.; PŘIKRYL, J.; MACÁK, J. TiO2 ALD Coating of Amorphous TiO2 Nanotube Layers: Inhibition of the Structural and Morphological Changes Due to Water Annealing. Frontiers in Chemistry, 2019, vol. 7, no. 1, p. 1-12. ISSN: 2296-2646.Detail
Fichtner, J.; Garlyyev, B.; Watzele, S.; El-Sayed, HA.; Schwammlein, JN.; Li, WJ.; Maillard, FM.; Dubau, L.; Michalicka, J. ; Macak, JM. ; Holleitner, A.; Bandarenka, AS. Top-Down Synthesis of Nanostructured Platinum−Lanthanide Alloy Oxygen Reduction Reaction Catalysts: PtxPr/C as an Example. ACS applied materials & interfaces, 2019, vol. 11, no. 5, p. 5129-5135. ISSN: 1944-8252.Detail
TORRES RODRÍGUEZ, J.; KALMÁR, J.; MENELAOU, M.; ČELKO, L.; DVOŘÁK, K.; CIHLÁŘ, J.; CIHLÁŘ, J.; KAISER, J.; GYŐRI, E.; VERES, P.; FÁBIÁN, I.; LÁZÁR, I. Heat treatment induced phase transformations in zirconia and yttriastabilized zirconia monolithic aerogels. JOURNAL OF SUPERCRITICAL FLUIDS, 2019, vol. 149, no. 1, p. 54-63. ISSN: 0896-8446.Detail
KALASOVÁ, D.; ZIKMUND, T.; PÍNA, L.; TAKEDA, Y.; HORVÁTH, M.; OMOTE, K.; KAISER, J. Characterization of a laboratory-based X-ray computed nanotomography system for propagation-based method of phase contrast imaging. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2020, vol. 69, no. 4, p. 1170-1178. ISSN: 0018-9456.Detail
MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L.; SLIWKOVÁ, P. Analysis of subsurface defects occurrence in abrasion resistant Creusabro steel after WEDM including the study of morphology and surface topography. MACHINING SCIENCE AND TECHNOLOGY, 2019, vol. 23, no. 6, p. 1-18. ISSN: 1091-0344.Detail
MOURALOVÁ, K.; ZAHRADNÍČEK, R.; BEDNÁŘ, J. Study of vertical graphene growth on silver substrate based on design of experiment. Diamond and Related Materials, 2019, vol. 97, no. 3, p. 1-10. ISSN: 0925-9635.Detail
KOLÍBAL, M.; BUKVIŠOVÁ, K.; KACHTÍK, L.; ZAK, A.; NOVÁK, L.; ŠIKOLA, T. Formation of Tungsten Oxide Nanowires by Electron-Beam-Enhanced Oxidation of WS2 Nanotubes and Platelets. Journal of Physical Chemistry C (print), 2019, vol. 123, no. 14, p. 9552-9559. ISSN: 1932-7447.Detail
NOVÁK, T.; KOSTELNÍK, P.; KONEČNÝ, M.; ČECHAL, J.; KOLÍBAL, M.; ŠIKOLA, T. Temperature effect on Al predose and AlN nucleation affecting the buffer layer performance for the GaN-on-Si based high-voltage devices. Japanese Journal of Applied Physics, 2019, vol. 58, no. SC, p. SC1018-1 (SC1018-9 p.)ISSN: 0021-4922.Detail
SALIAN, G.; KRBAL, M.; SOPHA, H.; LEBOUIN, C.; COULET, M.; MICHALIČKA, J.; HROMÁDKO, L.; TESFAYE, A.; MACÁK, J.; DJENIZIAN, T. Self-supported sulphurized TiO2nanotube layers as positive electrodes forlithium microbatteries. Applied Materials Today, 2019, vol. 16, no. 1, p. 257-264. ISSN: 2352-9407.Detail
GARLYYEV, B.; KRATZL, K.; RÜCK, M.; MICHALIČKA, J.; FICHTNER, J.; MACÁK, J.; KRATKY, T.; GÜNTHER, S.; COKOJA, M.; BANDARENKA, A.; GAGLIARDI, A.; FISCHER, R. Optimizing the Size of Platinum Nanoparticles for Enhanced Mass Activity in the Electrochemical Oxygen Reduction Reaction. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 2019, vol. 58, no. 28, p. 9596-9600. ISSN: 1433-7851.Detail
ŠETKA, M.; CALAVIA, R.; VOJKŮVKA, L.; LLOBET, E.; DRBOHLAVOVÁ, J.; VALLEJOS VARGAS, S. Raman and XPS studies of ammonia sensitive polypyrrole nanorods and nanoparticles. Scientific Reports, 2019, vol. 9, no. 1, p. 1-10. ISSN: 2045-2322.Detail
KALOVÁ, K.; BOBEROVÁ, K.; PŘICHYSTALOVÁ, R.; NOVÁČEK, J.; JAROŠOVÁ, I.; ZIKMUND, T.; KAISER, J.; KYSELICOVÁ, K.; ŠEBEST, L.; BALDOVIČ, M.; FRTÚS, A.; SIKORA, M.; ALLENTOFT, M. Serious chronic disease of the cervical spine and trauma in a young female from the middle ages (Czech Republic). International Journal of Paleopathology, 2019, vol. 24, no. 1, p. 185-196. ISSN: 1879-9817.Detail
VACEK, P.; KOSTELNÍK, P.; GRÖGER, R. Correlation of Structure and EBIC Contrast from Threading Dislocations in AlN/Si Films. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2019, vol. 256, no. 11, p. 1900279-1900279. ISSN: 0370-1972.Detail
KASPAR, P.; SOBOLA, D.; DALLAEV, R.; RAMAZANOV, S.; NEBOJSA, A.; REZAEE, S.; GRMELA, L. Characterization of Fe2O3 thin film on highly oriented pyrolytic graphite by AFM, Ellipsometry and XPS. Applied Surface Science, 2019, vol. 493, no. 1, p. 673-678. ISSN: 0169-4332.Detail
SLÁDEK, V.; ČEREVKOVÁ, S.; ZIKMUND, T.; KAISER, J. Error in the estimation of periosteal and endosteal contours from micro‐CT scans for nonadult tibiae and humeri. AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY, 2019, vol. 170, no. 2, p. 275-294. ISSN: 0002-9483.Detail
SHARANG, S.; DLUHOŠ, J.; KALASOVÁ, D.; DENISYUK, A.; VÁŇA, R.; ZIKMUND, T.; KAISER, J.; OBONA, J. In-depth Analysis of 10 nm Exynos Processor using Micro CT and FIB-SEM System. In IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits. 2019. p. 1-4. ISBN: 978-1-7281-3552-6.Detail
HRUBÝ, J.; SANTANA, V.; KOSTIUK, D.; BOUČEK, M.; LENZ, S.; KERN, M.; ŠIFFALOVIČ, P.; VAN SLAGEREN, J.; NEUGEBAUER, P. A graphene-based hybrid material with quantum bits prepared by the double Langmuir–Schaefer method. RSC Advances, 2019, vol. 9, no. 42, p. 24066-24073. ISSN: 2046-2069.Detail
MODLITBOVÁ, P.; FARKA, Z.; PASTUCHA, M.; POŘÍZKA, P.; NOVOTNÝ, K.; SKLÁDAL, P.; KAISER, J. Laser-Induced Breakdown Spectroscopy as a Novel Readout Method for Nanoparticle-Based Immunoassays. Microchimica Acta, 2019, no. 629, p. 186-196. ISSN: 0026-3672.Detail
MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L. Analysis of the oxide occurrence on WEDM surfaces in relation to subsequent surface treatments. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2019, vol. 234, no. 3, p. 721-733. ISSN: 0954-4062.Detail
CASAS LUNA, M.; TAN, H.; TKACHENKO, S.; SALAMON, D.; MONTUFAR JIMENEZ, E. Enhancement of mechanical properties of 3D-plotted tricalcium phosphate scaffolds by rapid sintering. Journal of the European Ceramic Society, 2019, vol. 39, no. 14, p. 4366-4374. ISSN: 0955-2219.Detail
DU PLESSIS, A.; LE ROUX, S.; WALLER, J.; SPERLING, S.; ACHILLES, N.; BEERLINK, A.; MÉTAYER, J.; SINICO, M.; PROBST, G.; DEWULF, W.; BITTNER, F.; ENDRES, H.; WILLNER, M.; DRÉGELYI-KISS, Á.; ZIKMUND, T.; LÁZŇOVSKÝ, J.; KAISER, J.; PINTER, P.; DIETRICH, S.; LOPEZ, E.; FITZEK, O.; KONRAD, P. Laboratory X-ray tomography for metal additive manufacturing: Round robin test. Additive Manufacturing, 2019, vol. 30, no. 1, p. 1-15. ISSN: 2214-8604.Detail
KRATZL, K.; KRATKY, T.; GÜNTHER, S.; TOMANEC, O.; ZBOŘIL, R.; MICHALIČKA, J.; MACÁK, J.; COKOJA, M.; FISCHER, R. Generation and Stabilization of Small Platinum Clusters Pt12±x Inside a Metal−Organic Framework. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 2019, vol. 141, no. 35, p. 13962-13969. ISSN: 0002-7863.Detail
REDONDO, J.; LAZAR, P.; PROCHÁZKA, P.; PRŮŠA, S.; MALLADA, B.; CAHLÍK, A.; LACHNITT, J.; BERGER, J.; ŠMÍD, B.; KORMOŠ, L.; JELÍNEK, A.; ČECHAL, J.; ŠVEC, M. Identification of Two-Dimensional FeO2 Termination of Bulk Hematite α‑Fe2O3(0001) Surface. Journal of Physical Chemistry C (print), 2019, vol. 123, no. 23, p. 14312-14318. ISSN: 1932-7447.Detail
VALLEJOS VARGAS, S.; GRÁCIA, I.; PIZÚROVÁ, N.; FIGUERAS, E.; ČECHAL, J.; HUBÁLEK, J.; CANÉ, C. Gas sensitive ZnO structures with reduced humidity-interference. Sensors and Actuators B: Chemical, 2019, vol. 301, no. 1, p. 127054-127054. ISSN: 0925-4005.Detail
TRUNEC, M.; ŠŤASTNÝ, P.; KELAR, J.; PAZDERKA, M. Effect of plasma treatment of polymeric tape carriers on wetting behaviour of aqueous ceramic tape casting slurry. Ceramics International, 2019, vol. 45, no. 7, p. 9318-9385. ISSN: 0272-8842.Detail
ŠŤASTNÝ, P.; SEDLÁČEK, R.; SUCHÝ, T.; LUKÁŠOVÁ, V.; RAMPICHOVÁ, M.; TRUNEC, M. Structure degradation and strength changes of sintered calcium phosphate bone scaffolds with different phase structures during simulated biodegradation in vitro. Materials Science and Engineering C-Materials for Biological Applications, 2019, vol. 100, no. 1, p. 544-553. ISSN: 0928-4931.Detail
ZEMÁNEK, M.; PŘIBYL, R.; KELAR, J.; PAZDERKA, M.; ŠŤASTNÝ, P.; KÚDELČÍK, J.; TRUNEC, M.; ČERNÁK, M. Electrical properties of alumina-based ceramic barrier layers for dielectric barrier discharge. Plasma Sources Science and Technology, 2019, vol. 28, no. 7, p. 075001-075001. ISSN: 1361-6595.Detail
PRAJZLER, V.; PRŮŠA, S.; MACA, K. Rapid pressure-less sintering of fine grained zirconia ceramics: Explanation and elimination of a core-shell structure. Journal of the European Ceramic Society, 2019, vol. 39, no. 16, p. 5309-5319. ISSN: 0955-2219.Detail
BOUCHAL, P.; DVOŘÁK, P.; BABOCKÝ, J.; BOUCHAL, Z.; LIGMAJER, F.; HRTOŇ, M.; KŘÁPEK, V.; FAßBENDER, A.; LINDEN, S.; CHMELÍK, R.; ŠIKOLA, T. Kvantitativní fázové měření plazmonických metapovrchů pomocí geometricko-fázové holografické mikroskopie. Jemná mechanika a optika, 2019, roč. 64, č. 4, s. 95-98. ISSN: 0447-6441.Detail
KAŠTYL, J.; CHLUP, Z.; ŠŤASTNÝ, P.; TRUNEC, M. Machinability and properties of zirconia ceramics prepared by gelcasting method. Advances in Applied Ceramics, 2020, vol. 119, no. 5-6, p. 252-260. ISSN: 1743-6761.Detail
TAN, H.; KALOUSEK, R.; SALAMON, D. Increasing energy efficiency by tailoring the electric pulse pattern during Spark Plasma Sintering. CERAMICS INTERNATIONAL, 2019, vol. 44, no. 9, p. 24392-24397. ISSN: 1873-3956.Detail
JELINEK P.; POLASKOVA K., JENIK F.,JENIKOVA Z., DOSTAL L., DVORAKOVA E., CERMAN J., SOURKOVA H., BURSIKOVA V., SPATENKA P., ZAJICKOVA L. Effects of additives on atmospheric pressure gliding arc applied to the modification of polypropylene. Surface and Coatings Technology, 2019, no. 372, p. 45-55. ISSN: 0257-8972.Detail
MODLITBOVÁ, P.; POŘÍZKA, P.; KAISER, J. Laser-induced breakdown spectroscopy as a promising tool in the elemental bioimaging of plant tissues. TRAC-TRENDS IN ANALYTICAL CHEMISTRY, 2020, no. 2, p. 60-69. ISSN: 0165-9936.Detail
MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L.; BEDNÁŘ, J. The Influence of WEDM Parameters Setup on the Occurrence of Defects when Machining Hardox 400 Steel. Materials, 2019, vol. 12, no. 22, p. 1-15. ISSN: 1996-1944.Detail
ŠETKA, M.; BAHOS, F.; MATATAGUI, D.; POTOČEK, M.; KRÁL, Z.; DRBOHLAVOVÁ, J.; GRÁCIA, I.; VALLEJOS VARGAS, S. Love wave sensors based on gold nanoparticle-modified polypyrrole and their properties to ammonia and ethylene. Sensors and Actuators B: Chemical, 2020, vol. 8, no. 1, p. 1-10. ISSN: 0925-4005.Detail
ZHANG, H.; CHANG, H.; NEUŽIL, P. DEP-on-a-Chip: Dielectrophoresis Applied to Microfluidic Platforms. Micromachines, 2019, vol. 10, no. 6, p. 1-22. ISSN: 2072-666X.Detail
ILIESCU, F.; VRTAČNIK, D.; NEUŽIL, P.; ILIESCU, C. Microfluidic Technology for Clinical Applications of Exosomes. Micromachines, 2019, vol. 10, no. 6, p. 1-29. ISSN: 2072-666X.Detail
LIGMAJER, F.; HORÁK, M.; ŠIKOLA, T.; FOJTA, M.; DAŇHEL, A. Silver Amalgam Nanoparticles and Microparticles: A Novel Plasmonic Platform for Spectroelectrochemistry. Journal of Physical Chemistry C (print), 2019, vol. 123, no. 27, p. 16957-16964. ISSN: 1932-7447.Detail
HAVRANOVÁ, P.; LIGMAJER, F.; DAŇHEL, A. Electrodeposition of Silver Amalgam on Thin Gold Film Electrodes for Voltammetric Detection of 4‐Nitrophenol and DNA Labeled with Osmium Tetroxide‐Bipyridine Complex. Electroanalysis, 2019, vol. 31, no. 10, p. 1952-1960. ISSN: 1521-4109.Detail
Liu, L., Li, S., Liu, D., Benstetter, G., Man, O., Michalicka, J., Zhang, Y., Hong, Y., Fan, H., Ni, W., Yang, Q., Wu, Y., Bi, Z. The effect of O2 impurity on surface morphology of polycrystalline W during low-energy and high-flux He+ irradiation. FUSION ENGINEERING AND DESIGN, 2019, vol. 139, no. February 2019, p. 96-103. ISSN: 0920-3796.Detail
KNÁPEK, A.; SOBOLA, D.; BURDA, D.; DAŇHEL, A.; MOUSA, M.; KOLAŘÍK, V. Polymer Graphite Pencil Lead as a Cheap Alternative for Classic Conductive SPM Probes. Nanomaterials, 2019, vol. 9, no. 12, p. 1-12. ISSN: 2079-4991.Detail
SPUSTA, T.; JEMELKA, M.; MACA, K. The Comprehensive Study of the Thermal Etching Conditions for Partially and Fully Dense Ceramic Samples. Science of Sintering, 2019, vol. 51, no. 3, p. 257-264. ISSN: 0350-820X.Detail
ZBONČÁK, M.; ONDREÁŠ, F.; UHLÍŘ, V.; LEPCIO, P.; MICHALIČKA, J.; JANČÁŘ, J. Translation of segment scale stiffening into macro scale reinforcement in polymer nanocomposites. Polymer Engineering and Science, 2020, vol. 60, no. 3, p. 587-596. ISSN: 0032-3888.Detail
BENDOVÁ, M.; PYTLÍČEK, Z.; PRÁŠEK, J.; MOZALEV, A. The growth and unique electronic properties of the porous-alumina-assisted hafnium-oxide nanostructured films. Electrochimica Acta, 2019, vol. 327, no. 1, p. 1-12. ISSN: 0013-4686.Detail
STACH, S.; TALU, S.; DALLAEV, R.; ARMAN, A.; SOBOLA, D.; SALERNO, M. Evaluation of the Topographical Surface Changes of Silicon Wafers after Annealing and Plasma Cleaning. Silicon, 2020, vol. 11, no. 1, p. 2563-2570. ISSN: 1876-990X.Detail
PAZNIAK, A.; BAZHIN, P.; SHPLIS, N.; KOLESNIKOV, E.; SHCHETININ, I.; KOMISSAROV, A.; POLČÁK, J.; STOLIN, A.; KUZNETSOV, D. Ti3C2Tx MXene characterization produced from SHS-ground Ti3AlC2. Materials & Design, 2019, vol. 183, no. 1, p. 108143-108143. ISSN: 0264-1275.Detail
MANAKHOV, A.; PERMYAKOVA, E.; ERSHOV, S.; SHEVEYKO, A.; KOVALSKII, A.; POLČÁK, J.; ZHITNYAK, I.; GLOUSHANKOVA, N.; ZAJÍČKOVÁ, L.; SHTANSKY, D. Bioactive TiCaPCON-coated PCL nanofibers as a promising material for bone tissue engineering. Applied Surface Science, 2019, vol. 479, no. 1, p. 796-802. ISSN: 0169-4332.Detail
MOURALOVÁ, K.; HRABEC, P.; BENEŠ, L.; OTOUPALÍK, J.; BEDNÁŘ, J.; PROKEŠ, T.; MATOUŠEK, R. Verification of Fuzzy Inference System for Cutting Speed while WEDM for the Abrasion-Resistant Steel Creusabro by Conventional Statistical Methods. Metals, 2020, vol. 10, no. 1, p. 1-11. ISSN: 2075-4701.Detail
SOPHA, H.; TESFAYE, A.; ZAZPE, R.; MICHALIČKA, J.; DVOŘÁK, F.; HROMÁDKO, L.; KRBAL, M.; PŘIKRYL, J.; DJENIZIAN, T.; MACÁK, J. ALD growth of MoS2 nanosheets on TiO2 nanotube supports. FlatChem, 2019, vol. 17, no. 1, p. 1-17. ISSN: 2452-2627.Detail
PRÁŠEK, J.; HOUŠKA, D.; HRDÝ, R.; HUBÁLEK, J.; SCHMID, U. Optimization of Cryogenic Deep Reactive Ion Etching Process for On-Chip Energy Storage. In 42st International Spring Seminar on Electronics Technology ISSE2019. International Spring Seminar on Electronics Technology ISSE. Poland: IEEE Computer Society, 2019. p. 1-6. ISBN: 978-1-7281-1874-1. ISSN: 2161-2536.Detail
SLAVÍK, J.; SKOPALÍK, J.; PROVAZNÍK, I.; HUBÁLEK, J. Multi-electrode array with a planar surface for cell patterning by microprinting. SENSORS, 2019, vol. 19, no. 24, p. 1-11. ISSN: 1424-8220.Detail
TRNKOVÁ, L.; SLAVÍK, J.; HUBÁLEK, J. Metallothionein and Selenite in Brdička Reaction. In XIX. Workshop of Biophysical Chemists and Electrochemists. 2019. p. 57-58. ISBN: 978-80-210-9309-6.Detail
KAUSHIK, P.; ELIÁŠ, M.; MICHALIČKA, J.; HEGEMANN, D.; PYTLÍČEK, Z.; NEČAS, D.; ZAJÍČKOVÁ, L. Atomic layer deposition of titanium dioxide on multi-walled carbon nanotubes for ammonia gas sensing. Surface and Coatings Technology, 2019, vol. 370, no. 370, p. 235-243. ISSN: 0257-8972.Detail
SLAVÍK, J.; TRNKOVÁ, L.; HUBÁLEK, J. Interaction of selenite with metallothionein studied by Brdika reaction. Monatshefte für Chemie, 2019, vol. 150, no. 3, p. 469-475. ISSN: 1434-4475.Detail
PAPEŽ, N.; GAJDOŠ, A.; DALLAEV, R.; SOBOLA, D.; SEDLÁK, P.; MOTÚZ, R.; NEBOJSA, A.; GRMELA, L. Performance analysis of GaAs based solar cells under gamma irradiation. Applied Surface Science, 2020, no. 510, p. 265-272. ISSN: 0169-4332.Detail
GABLECH, I.; KLEMPA, J.; PEKÁREK, J.; VYROUBAL, P.; HRABINA, J.; HOLÁ, M.; KUNZ, J.; BRODSKÝ, J.; NEUŽIL, P. Simple and efficient AlN-based piezoelectric energy harvesters. Micromachines, 2020, vol. 11, no. 2, p. 1-10. ISSN: 2072-666X.Detail
Loghina, L.; Iakovleva, A.; Chylii, M.; Svec, P.; Houdek, J.; Slang, S.; Palka, K.; Michalicka, J.; Vlcek, M. Synthetic development in Cd-Zn-Se quantum dots chemistry. OPTICAL MATERIALS, 2019, vol. 97, no. 1, p. 109385-1 (109385-9 p.)ISSN: 1873-1252.Detail
Rienks, EDL.; Wimmer, S.; Sanchez-Barriga, J.; Caha, O.; Mandal, PS.; Ruzicka, J.; Ney, A.; Steiner, H. ; Albu, M.; Kothleitner, G.; Michalicka, J. ; Khan, SA.; Minar, J.; Ebert, H.; Bauer, G. ; Freyse, F.; Varykhalov, A.; Rader, O. Springholz, G. Large magnetic gap at the Dirac point in Bi2Te3/MnBi2Te4 heterostructures. NATURE, 2019, vol. 576, no. 7787, p. 423-441. ISSN: 0028-0836.Detail
CASAS LUNA, M.; TORRES RODRÍGUEZ, J.; Valdés-Martínez, O. U.; Obradović, N.; SLÁMEČKA, K.; MACA, K.; KAISER, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. Ceramics International, 2020, vol. 46, no. 7, p. 8853-8861. ISSN: 0272-8842.Detail
KÉPEŠ, E.; VRÁBEL, J.; STŘÍTEŽSKÁ, S.; POŘÍZKA, P.; KAISER, J. Benchmark classification dataset for laser-induced breakdown spectroscopy. Scientific data, 2020, vol. 7, no. 1, p. 1-4. ISSN: 2052-4463.Detail
PROCHAZKA, D.; POŘÍZKA, P.; NOVOTNÝ, J.; HRDLIČKA, A.; NOVOTNÝ, K.; ŠPERKA, P.; KAISER, J. Triple-pulse LIBS: Laser-induced breakdown spectroscopy signal enhancement by combination of pre-ablation and re-heating laser pulses. Journal of Analytical Atomic Spectrometry, 2020, vol. 35, no. 2, p. 293-300. ISSN: 1364-5544.Detail
MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; JANKOVÝCH, R.; FRIES, J.; VONTOR, J. Analysis of the machinability of copper alloy Ampcoloy by WEDM. Materials, 2020, vol. 13, no. 4, p. 1-14. ISSN: 1996-1944.Detail
LEDNICKÝ, T.; BONYÁR, A. Large Scale Fabrication of Ordered Gold Nanoparticle-Epoxy Surface Nanocomposites and Their Application as Label-Free Plasmonic DNA Biosensors. ACS APPL MATER INTER, 2020, vol. 12, no. 4, p. 4804-4814. ISSN: 1944-8244.Detail
St Marie, L.; El Fatimy, A.; Hruby, J.; Nemec, I.; Hunt, J.; Myers-Ward, R.; Gaskill, DK.; Kruskopf, M.; Yang, YF.; Elmquist, R.; Marx, R.; van Slageren, J.; Neugebauer, P.; Barbara, P. Nanostructured graphene for nanoscale electron paramagnetic resonance spectroscopy. Journal of Physics: Materials, 2020, vol. 3, no. 1, p. 14013-14021. ISSN: 2515-7639.Detail
Krizek, F.; Kaspar, Z.; Vetushka, A.; Kriegner, D.; Fiordaliso, EM.; Michalicka, J.; Man, O.; Zubac, J.; Brajer, M.; Hills, VA.; Edmonds, KW.; Wadley, P.; Campion, RP.; Olejnik, K.; Jungwirth, T.; Novak, V. Molecular beam epitaxy of CuMnAs. PHYSICAL REVIEW MATERIALS, 2020, vol. 4, no. 1, p. 014409-1 (014409-9 p.)ISSN: 2475-9953.Detail
REMEŠOVÁ, M.; TKACHENKO, S.; KVARDA, D.; ROČŇÁKOVÁ, I.; GOLLAS, B.; MENELAOU, M.; ČELKO, L.; KAISER, J. Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy. Applied Surface Science, 2020, vol. 513, no. 145780, p. 1-10. ISSN: 0169-4332.Detail
ROBL, J.; SEDLÁK, J.; POKORNÝ, Z.; ŇUKSA, P.; BARÉNYI, I.; MAJERÍK, J. Analysis of advanced additive technology in direct metal laser sintering and precision casting method. Bulletin of the Polish Academy of Sciences: Technical Sciences, 2020, vol. 68, no. 1, p. 109-118. ISSN: 2300-1917.Detail
WANG, T.; SHI, Y.; PUGLISI, F. M.; CHEN, S.; ZHU, K.; ZOU, Y.; LI, X.; JING, X.; HAN, T.; GUO, B.; BUKVIŠOVÁ, K.; KACHTÍK, L.; KOLÍBAL, M.; WEN, CH.; LANZA, M. Electroforming in Metal-Oxide Memristive Synapses. ACS applied materials & interfaces, 2020, vol. 12, no. 10, p. 11806-11814. ISSN: 1944-8252.Detail
KŘÁPEK, V.; KONEČNÁ, A.; HORÁK, M.; LIGMAJER, F.; STÖGER-POLLACH, M.; HRTOŇ, M.; BABOCKÝ, J.; ŠIKOLA, T. Independent engineering of individual plasmon modes in plasmonic dimers with conductive and capacitive coupling. Nanophotonics, 2020, vol. 9, no. 3, p. 623-632. ISSN: 2192-8606.Detail
VRÁBEL, J.; POŘÍZKA, P.; KAISER, J. Restricted Boltzmann Machine method for dimensionality reduction of large spectroscopic data. Spectrochimica Acta Part B, 2020, vol. 167, no. 105849, p. NA (NA p.)ISSN: 0584-8547.Detail
DRDLÍKOVÁ, K.; KLEMENT, R.; DRDLÍK, D.; GALUSEK, D.; MACA, K. Processing and properties of luminescent Cr3+ doped transparent alumina ceramics. Journal of the European Ceramic Society, 2020, vol. 40, no. 7, p. 2573-2580. ISSN: 0955-2219.Detail
Vozda, V.; Medvedev, N.; Chalupsky, J.; Cechal, J.; Burian, T.; Hajkova, V.; Juha, L.; Krus, M.; Kunc, J. Detachment of epitaxial graphene from SiC substrate by XUV laser radiation. CARBON, 2020, vol. 161, no. 1, p. 36-43. ISSN: 0008-6223.Detail
Rihacek, T.; Horak, M.; Schachinger, T.; Matejka, M.; Mika, F.; Mullerova, I. CREATION OF ELECTRON VORTEX BEAMS USING THE HOLOGRAPHIC RECONSTRUCTION METHOD IN A SCANNING ELECTRON MICROSCOPE. In RECENT TRENDS IN CHARGED PARTICLE OPTICS AND SURFACE PHYSICS INSTRUMENTATION. 2018. p. 66-66. ISBN: 978-80-87441-23-7.Detail
Sebest, P.; Havranova, P.; Ligmajer, F.; Fojta, M.; Danhel, A. Electrochemical Deposition of Silver Amalgam Particles on Pyrolitic Graphite Electrode. In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE MODERN ELECTROCHEMICAL METHODS XXXVIII. 2018. p. 217-220. ISBN: 978-80-905221-6-9.Detail
Fichtner, J.; Watzele, S.; Garlyyev, B.; Kluge, RM.; Haimerl, F.; El-Sayed, HA.; Li, WJ.; Maillard, FM.; Dubau, L.; Chattot, R.; Michalicka, J.; Macak, JM.; Wang, W.; Wang, D.; Gigl, T.; Hugenschmidt, C.; Bandarenka, AS. Tailoring the Oxygen Reduction Activity of Pt Nanoparticles through Surface Defects: A Simple Top-Down Approach. ACS Catalysis, 2020, vol. 10, no. 5, p. 3131-3142. ISSN: 2155-5435.Detail
Vrábel, J.; Képeš, E.; Duponchel, L.; Motto-Ros, V.; Fabre, C.; Connemann, S.; Schreckenberg, F.; Riebe, D.; Junjuri, R.; Gundawar, M.K.; Tan, X.; Pořízka, P.; Kaiser, J. Classification of challenging LIBS soil sample data - EMSLIBS contest. Spectrochimica Acta Part B, 2020, vol. 169, no. 105872, p. 1-12. ISSN: 0584-8547.Detail
MORAVČÍK, I.; HORNÍK, V.; MINÁRIK, P.; LI, L.; MICHAELA, J.; RAABE, D.; LI, Z. Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy. Materials Science and Engineering A, 2020, vol. 781, no. 139242, p. 1-14. ISSN: 0921-5093.Detail
MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; FRIES, J. Machining of pure molybdenum using WEDM. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2020, vol. 2020, no. 163, p. 1-13. ISSN: 0263-2241.Detail
SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 2020, vol. 384, no. 125328, p. 1-13. ISSN: 0257-8972.Detail
SOBOLA, D.; RAMAZANOV, S.; KONEČNÝ, M.; ORUDZHEV, F.; KASPAR, P.; PAPEŽ, N.; KNÁPEK, A.; POTOČEK, M. Complementary SEM-AFM of Swelling Bi-Fe-O Film on HOPG Substrate. Materials, 2020, vol. 13, no. 1, p. 1-15. ISSN: 1996-1944.Detail
MODLITBOVÁ, P.; POŘÍZKA, P.; STŘÍTEŽSKÁ, S.; ZEZULKA, Š.; KUMMEROVÁ, M.; NOVOTNÝ, K.; KAISER, J. Detail investigation of toxicity, bioaccumulation, and translocation of Cd-based quantum dots and Cd salt in white mustard. CHEMOSPHERE, 2020, vol. 251, no. 1, p. 126174-1 (126174-11 p.)ISSN: 1879-1298.Detail
KORMOŠ, L.; PROCHÁZKA, P.; MAKOVEEV, A.; ČECHAL, J. Complex k-uniform tilings by a simple bitopic precursor self-assembled on Ag(001) surface. NATURE COMMUNICATIONS, 2020, vol. 11, no. 1, p. 1-6. ISSN: 2041-1723.Detail
ŠETKA, M.; MATATAGUI, D.; BAHOS, F.; GRÁCIA, I.; FIGUERAS, E.; DRBOHLAVOVÁ, J.; VALLEJOS VARGAS, S. Love Wave Sensors with Silver Modified Polypyrrole Nanoparticles for VOCs Monitoring. SENSORS, 2020, vol. 20, no. 5, p. 1-11. ISSN: 1424-8220.Detail
Bernardini, F.; Vinci, G.; Prokop, D.; Savonuzzi, LB.; De Min, A.; Lenaz, D.; Princivalle, F.; Cocca, E.; Kasztovszky, Z.; Szilagyi, V.; Harsanyi, I.; Tuniz, C.; Cattani, M. A multi-analytical study of Bronze Age pottery from the UNESCO site of Al-Khutm (Bat, Oman). Archaeological and Anthropological Sciences, 2020, vol. 12, no. 8, p. 163-1 (163-22 p.)ISSN: 1866-9565.Detail
DRDLÍKOVÁ, K.; DRDLÍK, D.; HADRABA, H.; KLEMENT, R.; MACA, K. Optical and mechanical properties of Mn-doped transparent alumina and their comparison with selected rare earth and transient metal doped aluminas. Journal of the European Ceramic Society, 2020, vol. 40, no. 14, p. 4894-4900. ISSN: 0955-2219.Detail
KÉPEŠ, E.; GORNUSHKIN, I.; POŘÍZKA, P.; KAISER, J. Tomography of double-pulse laser-induced plasmas in the orthogonal geometry. ANALYTICA CHIMICA ACTA, 2020, no. 1135, p. 1-11. ISSN: 0003-2670.Detail
ŠŤASTNÁ, E.; ČÁSTKOVÁ, K.; RÁHEĽ, J. Influence of Hydroxyapatite Nanoparticles and Surface Plasma Treatment on Bioactivity of Polycaprolactone Nanofibers. Polymers, 2020, vol. 12, no. 9, p. 1-16. ISSN: 2073-4360.Detail
ZIKMUNDOVÁ, E.; ZIKMUND, T.; SLÁDEK, V.; KAISER, J. Non-destructive lock-picking of a historical treasure chest by means of X-ray computed tomography. PLOS ONE, 2020, vol. 15, no. 7, p. 1-12. ISSN: 1932-6203.Detail
MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; CASAS LUNA, M.; SKALKA, P.; RAMIREZ-CEDILLO, E.; ZBONČÁK, M.; KAISER, J.; ČELKO, L. Factors governing the dimensional accuracy and fracture modes under compression of regular and shifted orthogonal scaffolds. Journal of the European Ceramic Society, 2020, vol. 40, no. 14, p. 4923-4931. ISSN: 0955-2219.Detail
MONTUFAR JIMENEZ, E.; TKACHENKO, S.; CASAS LUNA, M.; ŠKARVADA, P.; SLÁMEČKA, K.; DÍAZ DE LA TORRE, S.; KOUTNÝ, D.; PALOUŠEK, D.; KOLEDOVÁ, Z.; HERNÁNDEZ-TAPIA, L.; ZIKMUND, T.; ČELKO, L.; KAISER, J. Benchmarking of additive manufacturing technologies for commercially-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. Additive Manufacturing, 2020, vol. 36, no. 101516, p. 1-13. ISSN: 2214-8604.Detail
ŠETKA, M.; CALAVIA, R.; VOJKŮVKA, L.; POLČÁK, J.; LLOBET, E.; DRBOHLAVOVÁ, J.; VALLEJOS VARGAS, S. Electrochemically deposited polypyrrole nanorods and study of their ammonia sensing properties. Materials Today: Proceedings, 2020, vol. 20, no. 3, p. 305-310. ISSN: 2214-7853.Detail
Hache, T.; Vanatka, M.; Flajsman, L.; Weinhold, T.; Hula, T.; Ciubotariu, O.; Albrecht, M.; Arkook, B.; Barsukov, I.; Fallarino, L.; Hellwig, O.; Fassbender, J.; Urbanek, M.; Schultheiss, H. Freestanding Positionable Microwave-Antenna Device for Magneto-Optical Spectroscopy Experiments. Physical Review Applied, 2020, vol. 13, no. 5, p. 054009-1 (054009-10 p.)ISSN: 2331-7019.Detail
FLAJŠMAN, L.; WAGNER, K.; VAŇATKA, M.; GLOSS, J.; KŘIŽÁKOVÁ, V.; SCHMID, M.; URBÁNEK, M.; SCHULTHEISS, H. Zero-field propagation of spin waves in waveguides prepared by focused ion beam direct writing. PHYSICAL REVIEW B, 2020, vol. 101, no. 1, p. 014436-1 (014436-7 p.)ISSN: 2469-9969.Detail
SEYD, J.; URBÁNEK, M.; PILOTTEK, I.; SCHMIDT, N.; CAHA, O.; ALBRECHT, M. Mn3Ge-based tetragonal Heusler alloy thin films with addition of Ni, Pt, and Pd. Journal of Physics Condensed Matter, 2020, vol. 32, no. 14, p. 145801-1 (145801-11 p.)ISSN: 1361-648X.Detail
SCHÁNILEC, V.; CANALS, B.; UHLÍŘ, V.; FLAJŠMAN, L.; SADÍLEK, J.; ŠIKOLA, T.; ROUGEMAILLE, N. Bypassing Dynamical Freezing in Artificial Kagome Ice. Physical Review Letters, 2020, vol. 125, no. 5, p. 057203-1 (057201-5 p.)ISSN: 1079-7114.Detail
SALAJKOVÁ, Z.; HOLÁ, M.; PROCHAZKA, D.; ONDRAČEK, J.; PAVLIŇÁK, D.; ČELKO, L.; GREGAR, F.; ŠPERKA, P.; POŘÍZKA, P.; KANICKÝ, V.; DE GIACOMO, A.; KAISER, J. Influence of sample surface topography on laser ablation process. Talanta, 2021, vol. 222, no. 121512, p. 1-9. ISSN: 0039-9140.Detail
ŠŤASTNÝ, P.; VACEK, P.; TRUNEC, M. Characterization of microstructure and phase distribution of sintered multiphasic calcium phosphate bioceramics. Ceramics International, 2020, vol. 46, no. 4, p. 5500-5504. ISSN: 0272-8842.Detail
ŠŤASTNÝ, P.; CHLUP, Z.; TRUNEC, M. Gel-tape casting as a novel method for the production of flexible fine-grained alumina sheets. Journal of the European Ceramic Society, 2020, vol. 40, no. 7, p. 2542-2547. ISSN: 0955-2219.Detail
KASPAR, P.; SOBOLA, D.; ČÁSTKOVÁ, K.; KNÁPEK, A.; BURDA, D.; ORUDZHEV, F.; DALLAEV, R.; TOFEL, P.; TRČKA, T.; GRMELA, L.; HADAŠ, Z. Characterization of Polyvinylidene Fluoride (PVDF) Electrospun Fibers Doped by Carbon Flakes. Polymers, 2020, vol. 12, no. 12, p. 2766-1 (2766-15 p.)ISSN: 2073-4360.Detail
GABLECH, I.; KLEMPA, J.; PEKÁREK, J.; VYROUBAL, P.; KUNZ, J.; NEUŽIL, P. Aluminum nitride based piezoelectric harvesters. In 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (Power MEMS) Conference Proceedings. NEW YORK: IEEE, 2019. p. 1-4. ISBN: 978-1-7281-5638-5.Detail
GAGIĆ, M.; KOČIOVÁ, S.; ŠMERKOVÁ, K.; MICHÁLKOVÁ, H.; ŠETKA, M.; ŠVEC, P.; PŘIBYL, J.; MÁSILKO, J.; BÁLKOVÁ, R.; HEGER, Z.; RICHTERA, L.; ADAM, V.; MILOSAVLJEVIĆ, V. One-pot synthesis of natural amine-modified biocompatible carbon quantum dots with antibacterial activity. Journal of Colloid and Interface Science, 2020, vol. 580, no. 1, p. 30-48. ISSN: 0021-9797.Detail
ORUDZHEV, F.; RAMAZANOV, S.; SOBOLA, D.; ISAEV, A.; WANG, C.; MAGOMEDOVA, A.; KADIEV, M.; KAVIYARASU, K. Atomic Layer Deposition of Mixed-Layered Aurivillius Phase on TiO2 Nanotubes: Synthesis, Characterization and Photoelectrocatalytic Properties. Nanomaterials, 2020, vol. 10, no. 11, p. 1-16. ISSN: 2079-4991.Detail
PEKÁREK, J.; GABLECH, I.; KLEMPA, J.; SVATOŠ, V.; SCHNEIDER, M.; NEUŽIL, P. Aluminum Nitride with High d33 Piezoelectric Coefficient for MEMS Applications. In 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (Power MEMS) Conference Proceedings. NEW YORK: IEEE, 2019. p. 1-4. ISBN: 978-1-7281-5638-5.Detail
MATERNA MIKMEKOVÁ, E.; MÜLLEROVÁ, I.; FRANK, L.; POLČÁK, J.; SLUYTERMAN, S.; LEJEUNE, M.; KONVALINA, I. Low-energy electron microscopy of graphene outside UHV: electron-induced removal of PMMA residues used for graphene transfer. JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA, 2020, vol. 241, no. 1, p. 1-7. ISSN: 0368-2048.Detail
Budtova, T.; Aguilera, D.A.; Beluns, S.; Berglund, L.; Chartier, C.; Espinosa, E.; Gaidukovs, S.; Klimek-Kopyra, A.; Kmita, A.; Lachowicz, D.; Liebner, F.; Platnieks, O.; Rodríguez, A.; Tinoco Navarro, L.K.; Zou, F.; Buwalda, S.J. Biorefinery Approach for Aerogels. Polymers, 2020, vol. 12, no. 12, p. 2779-2842. ISSN: 2073-4360.Detail
HOLÁ, M.; SALAJKOVÁ, Z.; HRDLIČKA, A.; ONDRÁČEK, J.; NOVOTNÝ, K.; PAVLIŇÁK, D.; VOJTÍŠEK-LOM, M.; ČELKO, L.; POŘÍZKA, P.; KANICKÝ, V.; PROCHAZKA, D.; NOVOTNÝ, J.; KAISER, J. The effect of nanoparticle presence on aerosol formation during nanoparticle-enhanced laser ablation inductively coupled plasma mass spectrometry. Journal of Analytical Atomic Spectrometry, 2020, vol. 35, no. 12, p. 2893-2900. ISSN: 1364-5544.Detail
BARTOŠÍK, M.; MACH, J.; PIASTEK, J.; NEZVAL, D.; KONEČNÝ, M.; ŠVARC, V.; ENSSLIN, K.; ŠIKOLA, T. Mechanism and Suppression of Physisorbed-Water-Caused Hysteresis in Graphene FET Sensors. ACS Sensors, 2020, vol. 5, no. 9, p. 2940-2949. ISSN: 2379-3694.Detail
Mentes, TO.; Genuzio, F.; Schanilec, V.; Sadilek, J.; Rougemaille, N.; Locatelli, A. Coherent x-ray scattering in an XPEEM setup. Ultramicroscopy, 2020, vol. 216, no. 1, p. 113035-1 (113035-8 p.)ISSN: 0304-3991.Detail
BRUSCHI, D. Time evolution of two harmonic oscillators with cross-Kerr interactions. JOURNAL OF MATHEMATICAL PHYSICS, 2020, vol. 61, no. 3, p. 032102-1 (032102-13 p.)ISSN: 0022-2488.Detail
Qvarfort, S ; Serafini, A; Xuereb, A; Braun, D; Ratzel, D; Bruschi, DE. Time-evolution of nonlinear optomechanical systems: interplay of mechanical squeezing and non-Gaussianity. Journal of Physics A-Mathematical and Theoretical, 2020, vol. 53, no. 7, p. 075304-1 (075304-40 p.)ISSN: 1751-8113.Detail
HAVRANOVÁ, P.; ŠEBEST, P.; LIGMAJER, F.; FOJTA, M.; DAŇHEL, A. Preparation and Characterization of Silver Amalgam Particles on Gold Electrode Surface. In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE MODERN ELECTROCHEMICAL METHODS XXXVIII. 2018. p. 70-73. ISBN: 978-80-905221-6-9.Detail
ZAJÍČKOVÁ, L.; JELÍNEK, P.; OBRUSNÍK, A.; VODÁK, J.; NEČAS, D. Plasma-enhanced CVD of functional coatings in Ar/maleic anhydride/C2H2 homogeneous dielectric barrier discharges at atmospheric pressure. Plasma Physics and Controlled Fusion, 2017, vol. 59, no. 3, p. 1-13. ISSN: 1361-6587.Detail
KAMNEV, K.; PRÁŠEK, J.; MOZALEV, A. Anodic formation and SEM characterization of zirconium oxide nanostructured films. In NANOCON Conference Proceedings - International Conference on Nanomaterials, Volume 2020-October. Tanger, 2020. p. 631-636. ISBN: 978-80-8729-495-6.Detail
KASPAR, P.; SOBOLA, D.; ČÁSTKOVÁ, K.; DALLAEV, R.; ŠŤASTNÁ, E.; SEDLÁK, P.; KNÁPEK, A.; TRČKA, T.; HOLCMAN, V. Case Study of Polyvinylidene Fluoride Doping by Carbon Nanotubes. Materials, 2021, vol. 14, no. 6, p. 1428-1 (1428-12 p.)ISSN: 1996-1944.Detail
NAN, B.; MATOUŠEK, A.; TOFEL, P.; BIJALWAN, V.; BUTTON, T.; LI, L.; FAN, P.; ZHANG, H. Effect of lithium carbonate on the sintering, microstructure, and functional properties of sol-gel-derived Ba0.85Ca0.15Zr0.1Ti0.9O3 piezoceramics. JOURNAL OF MATERIALS RESEARCH, 2021, vol. 36, no. 5, p. 1105-1113. ISSN: 0884-2914.Detail
Shabanov, N.S.; Rabadanov, K.S.; Suleymanov, S.I.; Amirov, A.M.; Isaev, A.B.; Sobola, D.S.; Murliev, E.K.; Asvarova, G.A. Water-Soluble Copper Ink for the Inkjet Fabrication of Flexible Electronic Components. Materials, 2021, vol. 14, no. 9, p. 1-12. ISSN: 1996-1944.Detail
SMEJKALOVÁ, T.; ŢĂLU, Ş.; DALLAEV, R.; ČÁSTKOVÁ, K.; SOBOLA, D.; NAZAROV, A. SEM imaging and XPS characterization of doped PVDF fibers. In WFCES 2021. E3S Web of Conferences. EDP Sciences, 2021. p. 1-14. ISSN: 2267-1242.Detail
MISIUREV, D.; ŢĂLU, Ş.; DALLAEV, R.; SOBOLA, D.; GONCHAROVA, M. Preparation of PVDF-CNT composite. In WFCES 2021. E3S Web of Conferences. EDP Sciences, 2021. p. 1-8. ISSN: 2267-1242.Detail
SOBOLA, D.; KASPAR, P.; ČÁSTKOVÁ, K.; DALLAEV, R.; PAPEŽ, N.; SEDLÁK, P.; TRČKA, T.; ORUDZHEV, F.; KAŠTYL, J.; WEISER, A.; KNÁPEK, A.; HOLCMAN, V. PVDF Fibers Modification by Nitrate Salts Doping. Polymers, 2021, vol. 13, no. 15, p. 1-15. ISSN: 2073-4360.Detail
ORUDZHEV, F.; RAMAZANOV, S.; SOBOLA, D.; KASPAR, P.; TRČKA, T.; ČÁSTKOVÁ, K.; KAŠTYL, J.; ZVEREVA, I.; WANG, C.; SELIMOV, D.; GULAKHMEDOV, R.; ABDURAKHMANOV, M.; SHUAIBOV, A.; KADIEV, M. Ultrasound and water flow driven piezophototronic effect in self-polarized flexible alpha-Fe2O3 containing PVDF nanofibers film for enhanced catalytic oxidation. Nano Energy, 2021, vol. 90, no. 106586, p. 1-13. ISSN: 2211-2855.Detail
GABLECH, I.; BRODSKÝ, J.; VYROUBAL, P.; PIASTEK, J.; BARTOŠÍK, M.; PEKÁREK, J. Mechanical strain and electric-field modulation of graphene transistors integrated on MEMS cantilevers. Journal of Materials Science, 2022, vol. 57, no. 3, p. 1923-1935. ISSN: 0022-2461.Detail
DAŇHEL, A.; ŠEBEST, P.; KEJÍK, L.; LIGMAJER, F.; HORÁK, M. Spectro-Electrochemical and plasmonic Behavior of Silver Amalgam Particles. In PROCEEDINGS OF INTERNATIONAL CONFERENCE MODERN ELECTROCHEMICAL METHODS XXXIX. 2019. p. 36-40. ISBN: 978-80-905221-7-6.Detail
GAGIĆ, M.; KOČIOVÁ, S.; ŠMERKOVÁ, K.; MICHÁLKOVÁ, H.; ŠETKA, M.; ŠVEC, P.; PŘIBYL, J.; MÁSILKO, J.; BÁLKOVÁ, R.; HEGER, Z.; RICHTERA, L.; ADAM, V.; MILOSAVLJEVIĆ, V. Corrigendum to “One-pot synthesis of natural amine-modified biocompatible carbon quantum dots with antibacterial activity”. 2022. p. 557-559.Detail
KUNC, J.; REJHON, M.; DĚDIČ, V.; BÁBOR, P. Thickness of sublimation grown SiC layers measured by scanning Raman spectroscopy. Journal of Alloys and Compounds, 2019, vol. 789, no. 1, p. 607-612. ISSN: 0925-8388.Detail
KADIEV, M.; SHUAIBOV, A.; ABDURAKHMANOV, M.; SELIMOV, D.; GULAKHMEDOV, R.; RABADANOVA, A.; SMEJKALOVÁ, T.; SOBOLA, D.; ČÁSTKOVÁ, K.; RAMAZANOV, S.; ORUDZHEV, F. Synthesis and Investigation of Piezophotocatalytic Properties of Polyvinylidene Fluoride Nanofibers Modified with Titanium Dioxide. Moscow University Chemistry Bulletin, 2022, vol. 77, no. 11, p. 256-261. ISSN: 1935-0260.Detail
KARTCI, A.; VANČÍK, S.; PRÁŠEK, J.; HRDÝ, R.; SCHNEIDER, M.; SCHMID, U.; HUBÁLEK, J. Comparison of on-chip MIS capacitors based on stacked HfO2/Al2O3 nanolaminates. Materials Today Communications, 2022, vol. 33, no. 1, p. 1-8. ISSN: 2352-4928.Detail
EL HAMMOUMI, M.; CHAUDHARY, V.; NEUGEBAUER, P.; EL FATIMY, A. Chemical vapor deposition: a potential tool for wafer scale growth of two-dimensional layered materials. Journal of Physics D - Applied Physics, 2022, vol. 55, no. 47, ISSN: 1361-6463.Detail
Kaddar, Y.; Chaudhary, V.; Bouhani, H.; Neugebauer, P.; Belhboub, A.; Fatimy, AE. Growth and stability of blue phosphorene on copper substrates: a molecular dynamics study. Applied Physics A: Materials Science and Processing, 2023, vol. 129, no. 11, ISSN: 1432-0630.Detail
KŘÁPEK, V.; HORÁK, M.; HRTOŇ, M.; KONEČNÁ, A.; STÖGER-POLLACH, M.; LIGMAJER, F.; ŠIKOLA, T. Independent engineering of individual plasmon modes in plasmonic dimers with conductive and capacitive coupling. International Conference on Metamaterials, Photonic Crystals and Plasmonics. META. 2021. p. 1063-1064. ISSN: 2429-1390.Detail